mirror/qmk_firmware
1
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware.git synced 2025-09-10 17:15:43 +00:00
Code Issues Packages Projects Releases Wiki Activity

Fixed AVRISP project sending a LOAD EXTENDED ADDRESS command to 128KB AVRs after programming or reading from the last page of FLASH.

Browse Source
This commit is contained in:
Dean Camera
2010-05-14 10:11:40 +00:00
parent 6b7770ef2b
commit 80d85090ba
6 changed files with 58 additions and 62 deletions
Download Patch File Download Diff File Expand all files Collapse all files

30
LUFA/ManPages/ChangeLog.txt
View File

@@ -6,26 +6,18 @@
/** \page Page_ChangeLog Project Changelog
*
* \section Sec_ChangeLog100513 Version 100513
* \section Sec_ChangeLogXXXXXX Version XXXXXX
* <b>New:</b>
* - N/A
* N/A
*
* <b>Changed:</b>
* - The TeensyHID bootloader has been removed, per request from Paul at PJRC
* - The LIBUSB_FILTERDRV_COMPAT compile time option in the XPLAINBridge and AVRISP-MKII projects has been renamed
* LIBUSB_DRIVER_COMPAT, as it applies to all software on all platforms using the libUSB driver
* N/A
*
* <b>Fixed:</b>
* - Fixed possible device lockup when INTERRUPT_CONTROL_ENDPOINT is enabled and the control endpoint is not properly
* selected when the ISR completes
* - Fixed AVRISP-MKII clone project not correctly issuing LOAD EXTENDED ADDRESS commands when the extended address
* boundary is crossed during programming or readback (thanks to Gerard Sexton)
* - Fixed warnings when building the AVRISP-MKII clone project with the ENABLE_XPROG_PROTOCOL compile time option disabled
* - Remove incorrect check for the current device state in the Set Configuration request handler of DevChapter9, which broke
* Set Configuration requests to the device under most circumstances.
*
* \section Sec_ChangeLog100512 Version 100512
* - Fixed AVRISP project sending a LOAD EXTENDED ADDRESS command to 128KB AVRs after programming or reading from
* the last page of FLASH
*
* \section Sec_ChangeLog100513 Version 100513
* <b>New:</b>
* - Added incomplete MIDIToneGenerator project
* - Added new Relay Controller Board project (thanks to OBinou)
@@ -63,8 +55,18 @@
* properly reset to their defaults
* - Device mode class driver callbacks are now fired before the control request status stage is sent to prevent the host from
* timing out if another request is immediately fired and the device has a lengthy callback routine
* - The TeensyHID bootloader has been removed, per request from Paul at PJRC
* - The LIBUSB_FILTERDRV_COMPAT compile time option in the XPLAINBridge and AVRISP-MKII projects has been renamed
* LIBUSB_DRIVER_COMPAT, as it applies to all software on all platforms using the libUSB driver
*
* <b>Fixed:</b>
* - Fixed possible device lockup when INTERRUPT_CONTROL_ENDPOINT is enabled and the control endpoint is not properly
* selected when the ISR completes
* - Fixed AVRISP-MKII clone project not correctly issuing LOAD EXTENDED ADDRESS commands when the extended address
* boundary is crossed during programming or readback (thanks to Gerard Sexton)
* - Fixed warnings when building the AVRISP-MKII clone project with the ENABLE_XPROG_PROTOCOL compile time option disabled
* - Remove incorrect check for the current device state in the Set Configuration request handler of DevChapter9, which broke
* Set Configuration requests to the device under most circumstances.
* - Fixed software PDI/TPI programming mode in the AVRISP project not correctly toggling just the clock pin
* - Fixed TWI_StartTransmission() corrupting the contents of the GPIOR0 register
* - Fixed TWI driver not aborting when faced with no response after attempting to address a device on the bus

7
LUFA/ManPages/MigrationInformation.txt
View File

@@ -10,11 +10,10 @@
* to the next version released. It does not indicate all new additions to the library in each version change, only
* areas relevant to making older projects compatible with the API changes of each new release.
*
* \section Sec_Migration100513 Migrating from 100512 to 100513
* This release was made shortly after the 100512 release, to fix a critical device-mode error. No specific migration
* information applies to this release - see \ref Sec_Migration100512 for migration information of the previous release.
* \section Sec_Migration100513 Migrating from 100219 to 100513
* N/A
*
* \section Sec_Migration100512 Migrating from 100219 to 100512
* \section Sec_Migration100513 Migrating from 100219 to 100513
*
* <b>Non-USB Library Components</b>
* - The \ref TWI_StartTransmission() function now takes in a timeout period, expressed in milliseconds, within which the addressed