Change rgblight_get_mode & rgb_matrix_get_mode's return type to uint8_t. (#4747)

* Change rgblight_get_mode's return type to uint8_t.

Since rgblight_get_mode() is just returning rgblight_config_t.mode,
it should match rgblight_config_t.mode's type: uint8_t.

* Update rgb_matrix_get_mode to return uint8_t.

docs/config_options.md

@@ -197,8 +197,27 @@ If you define these options you will enable the associated feature, which may in
 
 Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk
 
-* `#define SPLIT_HAND_PIN B7`
-  * For using high/low pin to determine handedness, low = right hand, high = left hand. Replace 'B7' with the pin you are using. This is optional and you can still use the EEHANDS method or MASTER_LEFT / MASTER_RIGHT defines like the stock Let's Split uses.
+### Setting Handedness
+
+One thing to remember, the side that the USB port is plugged into is always the master half. The side not plugged into USB is the slave.
+
+There are a few different ways to set handedness for split keyboards (listed in order of precedence):
+
+1. Set `SPLIT_HAND_PIN`: Reads a pin to determine handedness. If pin is high, it's the left side, if low, the half is determined to be the right side
+2. Set `EE_HANDS` and flash `eeprom-lefthand.eep`/`eeprom-righthand.eep` to each half
+3. Set `MASTER_RIGHT`: Half that is plugged into the USB port is determined to be the master and right half (inverse of the default)
+4. Default: The side that is plugged into the USB port is the master half and is assumed to be the left half. The slave side is the right half
+
+* `#define SPLIT_HAND_PIN B7` 
+  * For using high/low pin to determine handedness, low = right hand, high = left hand. Replace `B7` with the pin you are using. This is optional, and if you leave `SPLIT_HAND_PIN` undefined, then you can still use the EE_HANDS method or MASTER_LEFT / MASTER_RIGHT defines like the stock Let's Split uses.
+
+* `#define EE_HANDS` (only works if `SPLIT_HAND_PIN` is not defined)
+  * Reads the handedness value stored in the EEPROM after `eeprom-lefthand.eep`/`eeprom-righthand.eep` has been flashed to their respective halves.
+
+* `#define MASTER_RIGHT`
+  * Master half is defined to be the right half.
+
+### Other Options
 
 * `#define USE_I2C`
   * For using I2C instead of Serial (defaults to serial)
@@ -206,6 +225,20 @@ Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in yo
 * `#define SOFT_SERIAL_PIN D0`
   * When using serial, define this. `D0` or `D1`,`D2`,`D3`,`E6`.
 
+* `#define MATRIX_ROW_PINS_RIGHT { <row pins> }`
+* `#define MATRIX_COL_PINS_RIGHT { <col pins> }`
+  * If you want to specify a different pinout for the right half than the left half, you can define `MATRIX_ROW_PINS_RIGHT`/`MATRIX_COL_PINS_RIGHT`. Currently, the size of `MATRIX_ROW_PINS` must be the same as `MATRIX_ROW_PINS_RIGHT` and likewise for the definition of columns.
+
+* `#define SELECT_SOFT_SERIAL_SPEED <speed>` (default speed is 1)
+  * Sets the protocol speed when using serial communication
+  * Speeds:
+    * 0: about 189kbps (Experimental only)
+    * 1: about 137kbps (default)
+    * 2: about 75kbps
+    * 3: about 39kbps
+    * 4: about 26kbps
+    * 5: about 20kbps
+
 # The `rules.mk` File
 
 This is a [make](https://www.gnu.org/software/make/manual/make.html) file that is included by the top-level `Makefile`. It is used to set some information about the MCU that we will be compiling for as well as enabling and disabling certain features.

keyboards/comet46/comet46.c

@@ -4,19 +4,11 @@ void uart_init(void) {
 	SERIAL_UART_INIT();
 }
 
-void led_init(void) {
-	DDRD  |= (1<<1);
-	PORTD |= (1<<1);
-	DDRF  |= (1<<4) | (1<<5);
-	PORTF |= (1<<4) | (1<<5);
-}
-
 void matrix_init_kb(void) {
 	// put your keyboard start-up code here
 	// runs once when the firmware starts up
 	matrix_init_user();
 	uart_init();
-	led_init();
 }
 
 void matrix_scan_kb(void) {

keyboards/comet46/comet46.h

@@ -6,46 +6,6 @@
 #include "backlight.h"
 #include <stddef.h>
 
-#define red_led_off   PORTF |= (1<<5)
-#define red_led_on    PORTF &= ~(1<<5)
-#define blu_led_off   PORTF |= (1<<4)
-#define blu_led_on    PORTF &= ~(1<<4)
-#define grn_led_off   PORTD |= (1<<1)
-#define grn_led_on    PORTD &= ~(1<<1)
-
-#define set_led_off     red_led_off; grn_led_off; blu_led_off
-#define set_led_red     red_led_on;  grn_led_off; blu_led_off
-#define set_led_blue    red_led_off; grn_led_off; blu_led_on
-#define set_led_green   red_led_off; grn_led_on;  blu_led_off
-#define set_led_yellow  red_led_on;  grn_led_on;  blu_led_off
-#define set_led_magenta red_led_on;  grn_led_off; blu_led_on
-#define set_led_cyan    red_led_off; grn_led_on;  blu_led_on
-#define set_led_white   red_led_on;  grn_led_on;  blu_led_on
-
-/*
-#define LED_B 5
-#define LED_R 6
-#define LED_G 7
-
-#define all_leds_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
-
-#define red_led_on   PORTF |= (1<<LED_R)
-#define red_led_off  PORTF &= ~(1<<LED_R)
-#define grn_led_on   PORTF |= (1<<LED_G)
-#define grn_led_off  PORTF &= ~(1<<LED_G)
-#define blu_led_on   PORTF |= (1<<LED_B)
-#define blu_led_off  PORTF &= ~(1<<LED_B)
-
-#define set_led_off     PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
-#define set_led_red     PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_G) | (1<<LED_R)
-#define set_led_blue    PORTF = PORTF & ~(1<<LED_G) & ~(1<<LED_R) | (1<<LED_B)
-#define set_led_green   PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_R) | (1<<LED_G)
-#define set_led_yellow  PORTF = PORTF & ~(1<<LED_B) | (1<<LED_R) | (1<<LED_G)
-#define set_led_magenta PORTF = PORTF & ~(1<<LED_G) | (1<<LED_R) | (1<<LED_B)
-#define set_led_cyan    PORTF = PORTF & ~(1<<LED_R) | (1<<LED_B) | (1<<LED_G)
-#define set_led_white   PORTF |= (1<<LED_B) | (1<<LED_R) | (1<<LED_G)
-*/
-
 // This a shortcut to help you visually see your layout.
 // The first section contains all of the arguements
 // The second converts the arguments into a two-dimensional array

keyboards/comet46/config.h

@@ -41,12 +41,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define ONESHOT_TIMEOUT 500
 
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -65,6 +59,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 
+// Define masks for modifiers
+#define MODS_SHIFT_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LCTL)|MOD_BIT(KC_RCTRL))
+#define MODS_ALT_MASK  (MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
+#define MODS_GUI_MASK  (MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI))
+
 //UART settings for communication with the RF microcontroller
 #define SERIAL_UART_BAUD 1000000
 #define SERIAL_UART_DATA UDR1

keyboards/comet46/i2c.c

@@ -0,0 +1,162 @@
+#include <util/twi.h>
+#include <avr/io.h>
+#include <stdlib.h>
+#include <avr/interrupt.h>
+#include <util/twi.h>
+#include <stdbool.h>
+#include "i2c.h"
+
+#ifdef USE_I2C
+
+// Limits the amount of we wait for any one i2c transaction.
+// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
+// 9 bits, a single transaction will take around 90μs to complete.
+//
+// (F_CPU/SCL_CLOCK)  =>  # of μC cycles to transfer a bit
+// poll loop takes at least 8 clock cycles to execute
+#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
+
+#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
+
+volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+static volatile uint8_t slave_buffer_pos;
+static volatile bool slave_has_register_set = false;
+
+// Wait for an i2c operation to finish
+inline static
+void i2c_delay(void) {
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+
+  // easier way, but will wait slightly longer
+  // _delay_us(100);
+}
+
+// Setup twi to run at 100kHz or 400kHz (see ./i2c.h SCL_CLOCK)
+void i2c_master_init(void) {
+  // no prescaler
+  TWSR = 0;
+  // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
+  // Check datasheets for more info.
+  TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
+}
+
+// Start a transaction with the given i2c slave address. The direction of the
+// transfer is set with I2C_READ and I2C_WRITE.
+// returns: 0 => success
+//          1 => error
+uint8_t i2c_master_start(uint8_t address) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
+
+  i2c_delay();
+
+  // check that we started successfully
+  if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
+    return 1;
+
+  TWDR = address;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
+    return 1; // slave did not acknowledge
+  else
+    return 0; // success
+}
+
+
+// Finish the i2c transaction.
+void i2c_master_stop(void) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+}
+
+// Write one byte to the i2c slave.
+// returns 0 => slave ACK
+//         1 => slave NACK
+uint8_t i2c_master_write(uint8_t data) {
+  TWDR = data;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  // check if the slave acknowledged us
+  return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
+}
+
+// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
+// if ack=0 the acknowledge bit is not set.
+// returns: byte read from i2c device
+uint8_t i2c_master_read(int ack) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
+
+  i2c_delay();
+  return TWDR;
+}
+
+void i2c_reset_state(void) {
+  TWCR = 0;
+}
+
+void i2c_slave_init(uint8_t address) {
+  TWAR = address << 0; // slave i2c address
+  // TWEN  - twi enable
+  // TWEA  - enable address acknowledgement
+  // TWINT - twi interrupt flag
+  // TWIE  - enable the twi interrupt
+  TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
+}
+
+ISR(TWI_vect);
+
+ISR(TWI_vect) {
+  uint8_t ack = 1;
+  switch(TW_STATUS) {
+    case TW_SR_SLA_ACK:
+      // this device has been addressed as a slave receiver
+      slave_has_register_set = false;
+      break;
+
+    case TW_SR_DATA_ACK:
+      // this device has received data as a slave receiver
+      // The first byte that we receive in this transaction sets the location
+      // of the read/write location of the slaves memory that it exposes over
+      // i2c.  After that, bytes will be written at slave_buffer_pos, incrementing
+      // slave_buffer_pos after each write.
+      if(!slave_has_register_set) {
+        slave_buffer_pos = TWDR;
+        // don't acknowledge the master if this memory loctaion is out of bounds
+        if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
+          ack = 0;
+          slave_buffer_pos = 0;
+        }
+        slave_has_register_set = true;
+      } else {
+        i2c_slave_buffer[slave_buffer_pos] = TWDR;
+        BUFFER_POS_INC();
+      }
+      break;
+
+    case TW_ST_SLA_ACK:
+    case TW_ST_DATA_ACK:
+      // master has addressed this device as a slave transmitter and is
+      // requesting data.
+      TWDR = i2c_slave_buffer[slave_buffer_pos];
+      BUFFER_POS_INC();
+      break;
+
+    case TW_BUS_ERROR: // something went wrong, reset twi state
+      TWCR = 0;
+    default:
+      break;
+  }
+  // Reset everything, so we are ready for the next TWI interrupt
+  TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
+}
+#endif

keyboards/comet46/i2c.h

@@ -0,0 +1,49 @@
+#ifndef I2C_H
+#define I2C_H
+
+#include <stdint.h>
+
+#ifndef F_CPU
+#define F_CPU 16000000UL
+#endif
+
+#define I2C_READ 1
+#define I2C_WRITE 0
+
+#define I2C_ACK 1
+#define I2C_NACK 0
+
+#define SLAVE_BUFFER_SIZE 0x10
+
+// i2c SCL clock frequency 400kHz
+#define SCL_CLOCK  400000L
+
+extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+void i2c_master_init(void);
+uint8_t i2c_master_start(uint8_t address);
+void i2c_master_stop(void);
+uint8_t i2c_master_write(uint8_t data);
+uint8_t i2c_master_read(int);
+void i2c_reset_state(void);
+void i2c_slave_init(uint8_t address);
+
+
+static inline unsigned char i2c_start_read(unsigned char addr) {
+  return i2c_master_start((addr << 1) | I2C_READ);
+}
+
+static inline unsigned char i2c_start_write(unsigned char addr) {
+  return i2c_master_start((addr << 1) | I2C_WRITE);
+}
+
+// from SSD1306 scrips
+extern unsigned char i2c_rep_start(unsigned char addr);
+extern void i2c_start_wait(unsigned char addr);
+extern unsigned char i2c_readAck(void);
+extern unsigned char i2c_readNak(void);
+extern unsigned char i2c_read(unsigned char ack);
+
+#define i2c_read(ack)  (ack) ? i2c_readAck() : i2c_readNak();
+
+#endif

keyboards/comet46/keymaps/default-rgbled/keymap.c

@@ -0,0 +1,226 @@
+// this is the style you want to emulate.
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum comet46_layers
+{
+  _QWERTY,
+  _COLEMAK,
+  _DVORAK,
+  _LOWER,
+  _RAISE,
+  _ADJUST,
+};
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  LOWER,
+  RAISE,
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  /* Qwerty
+   * ,-----------------------------------------+                    +-----------------------------------------.
+   * | Tab  |   Q  |   W  |   E  |   R  |   T  |                    |   Y  |   U  |   I  |   O  |   P  | Bksp |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * | Ctl  |   A  |   S  |   D  |   F  |   G  | Esc  |      | Del  |   H  |   J  |   K  |   L  |   ;  |   "  |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * | Shift|   Z  |   X  |   C  |   V  |   B  |   {  |      |   }  |   N  |   M  |   ,  |   .  |   /  | Shift|
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+-------------|
+   *                             | GUI  | Lower| Space|      | Enter| Raise| Alt  |
+   *                             +--------------------/      \--------------------+
+   */
+  [_QWERTY] = LAYOUT(
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                             KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+    KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_ESC,         KC_DEL,  KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_LCBR,        KC_RCBR, KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+                                        KC_LGUI, LOWER,   KC_SPC,         KC_ENT,  RAISE,   KC_LALT
+  ),
+
+  /* Colemak
+   * ,-----------------------------------------+                    +-----------------------------------------.
+   * | Tab  |   Q  |   W  |   F  |   P  |   G  |                    |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * | Ctl  |   A  |   R  |   S  |   T  |   D  | Esc  |      | Del  |   H  |   N  |   E  |   I  |   O  |   "  |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * | Shift|   Z  |   X  |   C  |   V  |   B  |   {  |      |   }  |   K  |   M  |   ,  |   .  |   /  | Shift|
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+-------------|
+   *                             | GUI  | Lower| Space|      | Enter| Raise| Alt  |
+   *                             +--------------------/      \--------------------+
+   */
+  [_COLEMAK] = LAYOUT(
+    KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,                             KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC,
+    KC_LCTL, KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_ESC,         KC_DEL,  KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_LCBR,        KC_RCBR, KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+                                        KC_LGUI, LOWER,   KC_SPC,         KC_ENT,  RAISE,   KC_LALT
+  ),
+
+  /* Dvorak
+   * ,-----------------------------------------+                    +-----------------------------------------.
+   * | Tab  |   "  |   ,  |   .  |   P  |   Y  |                    |   F  |   G  |   C  |   R  |   L  | Bksp |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * | Ctl  |   A  |   O  |   E  |   U  |   I  | Esc  |      | Del  |   D  |   H  |   T  |   N  |   S  |  /   |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * | Shift|   ;  |   Q  |   J  |   K  |   X  |   {  |      |   }  |   B  |   M  |   W  |   V  |   Z  | Shift|
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+-------------|
+   *                             | GUI  | Lower| Space|      | Enter| Raise| Alt  |
+   *                             +--------------------/      \--------------------+
+   */
+  [_DVORAK] = LAYOUT(
+    KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,                             KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC,
+    KC_LCTL, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_ESC,         KC_DEL,  KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH,
+    KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_LCBR,        KC_RCBR, KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSFT,
+                                        KC_LGUI, LOWER,   KC_SPC,         KC_ENT,  RAISE,   KC_LALT
+  ),
+
+  /* Lower
+   * ,-----------------------------------------+                    +-----------------------------------------.
+   * |      |   !  |   @  |   #  |   $  |   %  |                    |   ^  |   &  |   *  |   (  |   )  |      |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |      |   `  |   \  |   -  |   =  |   [  |   ]  |      |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |      |   ~  |   |  |   _  |   +  |   {  |   }  |      |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+-------------|
+   *                             |      |      |      |      |      |      |      |
+   *                             +--------------------/      \--------------------+
+   */
+  [_LOWER] = LAYOUT(
+    _______, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                          KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
+    _______, _______, _______, _______, _______, _______, _______,        KC_GRV,  KC_BSLS, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, _______,
+    _______, _______, _______, _______, _______, _______, _______,        KC_TILD, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, _______,
+                                        _______, _______, _______,        _______, _______, _______
+  ),
+
+  /* Raise
+   * ,-----------------------------------------+                    +-----------------------------------------.
+   * |      |   1  |   2  |   3  |   4  |   5  |                    |      |      |      |      |      |      |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * |      |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |      |      | Left | Down |  Up  |Right | End  |      |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |      | Home |      | PgDn | PgUp |      |      |      |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+-------------|
+   *                             |      |      |      |      |      |      |      |
+   *                             +--------------------/      \--------------------+
+   */
+  [_RAISE] = LAYOUT(
+    _______, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                             KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______,
+    _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,          XXXXXXX, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_END,  _______,
+    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,         KC_HOME, XXXXXXX, KC_PGDN, KC_PGUP, XXXXXXX, XXXXXXX, _______,
+                                        _______, _______, _______,        _______, _______, _______
+  ),
+
+  /* Adjust
+   * ,-----------------------------------------+                    +-----------------------------------------.
+   * |      |      |      |      |      |      |                    |      |      |      |      |      |      |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |Qwerty|      |Colemk|      |      |      |      |      |      |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |Reset |      |Dvorak|      |      |      |      |      |      |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+-------------|
+   *                             |      |      |      |      |      |      |      |
+   *                             +--------------------/      \--------------------+
+   */
+  [_ADJUST] = LAYOUT(
+    _______, _______, _______, _______, _______, _______,                          _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, QWERTY,         COLEMAK, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, RESET,          DVORAK,  _______, _______, _______, _______, _______, _______,
+                                        _______, _______, _______,        _______, _______, _______
+  )
+};
+
+
+uint32_t layer_state_set_user(uint32_t state) {
+  return update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST);
+}
+
+// settings for LED on receiver
+void led_init(void) {
+	DDRD  |= (1<<1);
+	PORTD |= (1<<1);
+	DDRF  |= (1<<4) | (1<<5);
+	PORTF |= (1<<4) | (1<<5);
+}
+
+#define red_led_off   PORTF |= (1<<5)
+#define red_led_on    PORTF &= ~(1<<5)
+#define blu_led_off   PORTF |= (1<<4)
+#define blu_led_on    PORTF &= ~(1<<4)
+#define grn_led_off   PORTD |= (1<<1)
+#define grn_led_on    PORTD &= ~(1<<1)
+
+#define set_led_off     red_led_off; grn_led_off; blu_led_off
+#define set_led_red     red_led_on;  grn_led_off; blu_led_off
+#define set_led_blue    red_led_off; grn_led_off; blu_led_on
+#define set_led_green   red_led_off; grn_led_on;  blu_led_off
+#define set_led_yellow  red_led_on;  grn_led_on;  blu_led_off
+#define set_led_magenta red_led_on;  grn_led_off; blu_led_on
+#define set_led_cyan    red_led_off; grn_led_on;  blu_led_on
+#define set_led_white   red_led_on;  grn_led_on;  blu_led_on
+
+void matrix_init_user(void) {
+  led_init();
+}
+
+void matrix_scan_user(void) {
+  uint8_t layer = biton32(layer_state);
+  uint8_t default_layer = biton32(eeconfig_read_default_layer());
+  switch (layer) {
+    case _LOWER:
+      set_led_red;
+      break;
+    case _RAISE:
+      set_led_blue;
+      break;
+    case _ADJUST:
+      set_led_magenta;
+      break;
+    default:
+      switch (default_layer) {
+        case _COLEMAK:
+          set_led_white;
+          break;
+        case _DVORAK:
+          set_led_yellow;
+          break;
+        default:
+          set_led_green;
+          break;
+      }
+      break;
+  }
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_COLEMAK);
+      }
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_DVORAK);
+      }
+      break;
+  }
+  return true;
+}

keyboards/comet46/keymaps/default-rgbled/readme.md

@@ -0,0 +1,3 @@
+## default-led
+
+A keymap that is compatible with mitosis-type receivers, which use RGB LED for layer indication.

keyboards/comet46/keymaps/default/config.h

@@ -0,0 +1,31 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+// #include "../../config.h"
+
+/* Use I2C or Serial */
+
+#define USE_I2C
+#define SSD1306OLED
+
+#endif

keyboards/comet46/keymaps/default/keymap.c

@@ -2,6 +2,10 @@
 // This is the canonical layout file for the Quantum project. If you want to add another keyboard,
 
 #include QMK_KEYBOARD_H
+#ifdef SSD1306OLED
+  #include "ssd1306.h"
+#endif
+
 
 // Each layer gets a name for readability, which is then used in the keymap matrix below.
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
@@ -9,13 +13,18 @@
 // entirely and just use numbers.
 enum comet46_layers
 {
-    _QWERTY,
-    _LOWER,
-    _RAISE,
+  _QWERTY,
+  _COLEMAK,
+  _DVORAK,
+  _LOWER,
+  _RAISE,
+  _ADJUST,
 };
 
 enum custom_keycodes {
   QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
   LOWER,
   RAISE,
 };
@@ -46,6 +55,42 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                                         KC_LGUI, LOWER,   KC_SPC,         KC_ENT,  RAISE,   KC_LALT
   ),
 
+  /* Colemak
+   * ,-----------------------------------------+                    +-----------------------------------------.
+   * | Tab  |   Q  |   W  |   F  |   P  |   G  |                    |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * | Ctl  |   A  |   R  |   S  |   T  |   D  | Esc  |      | Del  |   H  |   N  |   E  |   I  |   O  |   "  |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * | Shift|   Z  |   X  |   C  |   V  |   B  |   {  |      |   }  |   K  |   M  |   ,  |   .  |   /  | Shift|
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+-------------|
+   *                             | GUI  | Lower| Space|      | Enter| Raise| Alt  |
+   *                             +--------------------/      \--------------------+
+   */
+  [_COLEMAK] = LAYOUT(
+    KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,                             KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC,
+    KC_LCTL, KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_ESC,         KC_DEL,  KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_LCBR,        KC_RCBR, KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+                                        KC_LGUI, LOWER,   KC_SPC,         KC_ENT,  RAISE,   KC_LALT
+  ),
+
+  /* Dvorak
+   * ,-----------------------------------------+                    +-----------------------------------------.
+   * | Tab  |   "  |   ,  |   .  |   P  |   Y  |                    |   F  |   G  |   C  |   R  |   L  | Bksp |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * | Ctl  |   A  |   O  |   E  |   U  |   I  | Esc  |      | Del  |   D  |   H  |   T  |   N  |   S  |  /   |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * | Shift|   ;  |   Q  |   J  |   K  |   X  |   {  |      |   }  |   B  |   M  |   W  |   V  |   Z  | Shift|
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+-------------|
+   *                             | GUI  | Lower| Space|      | Enter| Raise| Alt  |
+   *                             +--------------------/      \--------------------+
+   */
+  [_DVORAK] = LAYOUT(
+    KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,                             KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC,
+    KC_LCTL, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_ESC,         KC_DEL,  KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH,
+    KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_LCBR,        KC_RCBR, KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSFT,
+                                        KC_LGUI, LOWER,   KC_SPC,         KC_ENT,  RAISE,   KC_LALT
+  ),
+
   /* Lower
    * ,-----------------------------------------+                    +-----------------------------------------.
    * |      |   !  |   @  |   #  |   $  |   %  |                    |   ^  |   &  |   *  |   (  |   )  |      |
@@ -70,7 +115,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
    * |      |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |      |      | Left | Down |  Up  |Right | End  |      |
    * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
-   * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |      | Home |      |      |      |      |      |      |
+   * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |      | Home |      | PgDn | PgUp |      |      |      |
    * |------+------+------+------+------+------+------+      +------+------+------+------+------+-------------|
    *                             |      |      |      |      |      |      |      |
    *                             +--------------------/      \--------------------+
@@ -78,26 +123,134 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [_RAISE] = LAYOUT(
     _______, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                             KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______,
     _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,          XXXXXXX, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_END,  _______,
-    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,         KC_HOME, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______,
+    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,         KC_HOME, XXXXXXX, KC_PGDN, KC_PGUP, XXXXXXX, XXXXXXX, _______,
+                                        _______, _______, _______,        _______, _______, _______
+  ),
+
+  /* Adjust
+   * ,-----------------------------------------+                    +-----------------------------------------.
+   * |      |      |      |      |      |      |                    |      |      |      |      |      |      |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |Qwerty|      |Colemk|      |      |      |      |      |      |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |Reset |      |Dvorak|      |      |      |      |      |      |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+-------------|
+   *                             |      |      |      |      |      |      |      |
+   *                             +--------------------/      \--------------------+
+   */
+  [_ADJUST] = LAYOUT(
+    _______, _______, _______, _______, _______, _______,                          _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, QWERTY,         COLEMAK, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, RESET,          DVORAK,  _______, _______, _______, _______, _______, _______,
                                         _______, _______, _______,        _______, _______, _______
   )
 };
 
 
-void matrix_scan_user(void) {
-    uint8_t layer = biton32(layer_state);
-    switch (layer) {
-    	case _QWERTY:
-    	    set_led_green;
-    	    break;
-        case _RAISE:
-            set_led_blue;
-            break;
-        case _LOWER:
-            set_led_red;
-            break;
-        default:
-            set_led_green;
-            break;
-    }
+uint32_t layer_state_set_user(uint32_t state) {
+  return update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST);
+}
+
+//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
+#ifdef SSD1306OLED
+
+// You need to add source files to SRC in rules.mk when using OLED display functions
+void set_keylog(uint16_t keycode);
+const char *read_keylog(void);
+const char *read_modifier_state(void);
+const char *read_host_led_state(void);
+
+void matrix_init_user(void) {
+  iota_gfx_init(false);   // turns on the display
+}
+
+void matrix_scan_user(void) {
+  iota_gfx_task();  // this is what updates the display continuously
+}
+
+void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
+  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+    memcpy(dest->display, source->display, sizeof(dest->display));
+    dest->dirty = true;
+  }
+}
+
+void render_status(struct CharacterMatrix *matrix) {
+  // Layer state
+  char layer_str[22];
+  matrix_write(matrix, "Layer: ");
+  uint8_t layer = biton32(layer_state);
+  uint8_t default_layer = biton32(eeconfig_read_default_layer());
+  switch (layer) {
+    case _QWERTY:
+      switch (default_layer) {
+        case _QWERTY:
+          snprintf(layer_str, sizeof(layer_str), "Qwerty");
+          break;
+        case _COLEMAK:
+          snprintf(layer_str, sizeof(layer_str), "Colemak");
+          break;
+        case _DVORAK:
+          snprintf(layer_str, sizeof(layer_str), "Dvorak");
+          break;
+        default:
+          snprintf(layer_str, sizeof(layer_str), "Undef-%d", default_layer);
+          break;
+      }
+      break;
+    case _RAISE:
+      snprintf(layer_str, sizeof(layer_str), "Raise");
+      break;
+    case _LOWER:
+      snprintf(layer_str, sizeof(layer_str), "Lower");
+      break;
+    case _ADJUST:
+      snprintf(layer_str, sizeof(layer_str), "Adjust");
+      break;
+    default:
+      snprintf(layer_str, sizeof(layer_str), "Undef-%d", layer);
+  }
+  matrix_write_ln(matrix, layer_str);
+  // Last entered keycode
+  matrix_write_ln(matrix, read_keylog());
+  // Modifier state
+  matrix_write_ln(matrix, read_modifier_state());
+  // Host Keyboard LED Status
+  matrix_write(matrix, read_host_led_state());
+}
+
+
+void iota_gfx_task_user(void) {
+  struct CharacterMatrix matrix;
+  matrix_clear(&matrix);
+  render_status(&matrix);
+  matrix_update(&display, &matrix);
+}
+
+#endif//SSD1306OLED
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  #ifdef SSD1306OLED
+    if (record->event.pressed) {
+      set_keylog(keycode);
+    }
+  #endif
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_COLEMAK);
+      }
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_DVORAK);
+      }
+      break;
+  }
+  return true;
 }

keyboards/comet46/keymaps/default/readme.md

@@ -0,0 +1,3 @@
+## default-oled-display
+
+A keymap that is compatible with receivers with an OLED display.

keyboards/comet46/keymaps/default/rules.mk

@@ -0,0 +1,5 @@
+# If you want to change display settings of the OLED, you need to change the following lines
+SRC +=  ./lib/glcdfont.c \
+		./lib/keylogger.c \
+        ./lib/modifier_state_reader.c \
+        ./lib/host_led_state_reader.c

keyboards/comet46/keymaps/satt/action_pseudo_lut.c

@@ -10,133 +10,133 @@ static uint8_t send_key_shift_bit[SHIFT_BIT_SIZE];
  * Memo: Using other layer keymap to get keycode
  */
 void action_pseudo_lut(keyrecord_t *record, uint8_t base_keymap_id, const uint16_t (*keymap)[2]) {
-    uint8_t prev_shift;
-    uint16_t keycode;
-    uint16_t pseudo_keycode;
+  uint8_t prev_shift;
+  uint16_t keycode;
+  uint16_t pseudo_keycode;
 
-    /* get keycode from keymap you specified */
-    keycode = keymap_key_to_keycode(base_keymap_id, record->event.key);
+  /* get keycode from keymap you specified */
+  keycode = keymap_key_to_keycode(base_keymap_id, record->event.key);
 
-    prev_shift = keyboard_report->mods & (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT));
+  prev_shift = keyboard_report->mods & (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT));
 
-    if (record->event.pressed) {
-        /* when magic commands entered, keycode does not converted */
-        if (IS_COMMAND()) {
-            if (prev_shift) {
-                add_shift_bit(keycode);
-            }
-            register_code(keycode);
-            return;
-        }
-
-        if (prev_shift) {
-            pseudo_keycode = convert_keycode(keymap, keycode, true);
-            dprintf("pressed: %02X, converted: %04X\n", keycode, pseudo_keycode);
-            add_shift_bit(keycode);
-
-            if (IS_LSFT(pseudo_keycode)) {
-                register_code(QK_LSFT ^ pseudo_keycode);
-            } else {
-                /* delete shift mod temporarily */
-                del_mods(prev_shift);
-                send_keyboard_report();
-                register_code(pseudo_keycode);
-                add_mods(prev_shift);
-                send_keyboard_report();
-            }
-        } else {
-            pseudo_keycode = convert_keycode(keymap, keycode, false);
-            dprintf("pressed: %02X, converted: %04X\n", keycode, pseudo_keycode);
-
-            if (IS_LSFT(pseudo_keycode)) {
-                add_weak_mods(MOD_BIT(KC_LSFT));
-                send_keyboard_report();
-                register_code(QK_LSFT ^ pseudo_keycode);
-                /* on Windows, prevent key repeat to avoid unintended output */
-                unregister_code(QK_LSFT ^ pseudo_keycode);
-                del_weak_mods(MOD_BIT(KC_LSFT));
-                send_keyboard_report();
-            } else {
-                register_code(pseudo_keycode);
-            }
-        }
-    } else {
-        if (get_shift_bit(keycode)) {
-            del_shift_bit(keycode);
-            pseudo_keycode = convert_keycode(keymap, keycode, true);
-        } else {
-            pseudo_keycode = convert_keycode(keymap, keycode, false);
-        }
-        dprintf("released: %02X, converted: %04X\n", keycode, pseudo_keycode);
-
-        if (IS_LSFT(pseudo_keycode)) {
-            unregister_code(QK_LSFT ^ pseudo_keycode);
-        } else {
-            unregister_code(pseudo_keycode);
-        }
+  if (record->event.pressed) {
+    /* when magic commands entered, keycode does not converted */
+    if (IS_COMMAND()) {
+      if (prev_shift) {
+        add_shift_bit(keycode);
+      }
+      register_code(keycode);
+      return;
     }
+
+    if (prev_shift) {
+      pseudo_keycode = convert_keycode(keymap, keycode, true);
+      dprintf("pressed: %02X, converted: %04X\n", keycode, pseudo_keycode);
+      add_shift_bit(keycode);
+
+      if (IS_LSFT(pseudo_keycode)) {
+        register_code(QK_LSFT ^ pseudo_keycode);
+      } else {
+        /* delete shift mod temporarily */
+        del_mods(prev_shift);
+        send_keyboard_report();
+        register_code(pseudo_keycode);
+        add_mods(prev_shift);
+        send_keyboard_report();
+      }
+    } else {
+      pseudo_keycode = convert_keycode(keymap, keycode, false);
+      dprintf("pressed: %02X, converted: %04X\n", keycode, pseudo_keycode);
+
+      if (IS_LSFT(pseudo_keycode)) {
+        add_weak_mods(MOD_BIT(KC_LSFT));
+        send_keyboard_report();
+        register_code(QK_LSFT ^ pseudo_keycode);
+        /* on Windows, prevent key repeat to avoid unintended output */
+        unregister_code(QK_LSFT ^ pseudo_keycode);
+        del_weak_mods(MOD_BIT(KC_LSFT));
+        send_keyboard_report();
+      } else {
+        register_code(pseudo_keycode);
+      }
+    }
+  } else {
+    if (get_shift_bit(keycode)) {
+      del_shift_bit(keycode);
+      pseudo_keycode = convert_keycode(keymap, keycode, true);
+    } else {
+      pseudo_keycode = convert_keycode(keymap, keycode, false);
+    }
+    dprintf("released: %02X, converted: %04X\n", keycode, pseudo_keycode);
+
+    if (IS_LSFT(pseudo_keycode)) {
+      unregister_code(QK_LSFT ^ pseudo_keycode);
+    } else {
+      unregister_code(pseudo_keycode);
+    }
+  }
 }
 
 uint16_t convert_keycode(const uint16_t (*keymap)[2], uint16_t keycode, bool shift_modded)
 {
-    uint16_t pseudo_keycode;
+  uint16_t pseudo_keycode;
 
-    switch (keycode) {
-        case KC_A ... KC_CAPSLOCK:
-#if defined(__AVR__)
-            if (shift_modded) {
-                pseudo_keycode = pgm_read_word(&keymap[keycode][1]);
-            } else {
-                pseudo_keycode = pgm_read_word(&keymap[keycode][0]);
-            }
-#else
-            if (shift_modded) {
-                pseudo_keycode = keymap[keycode][1];
-            } else {
-                pseudo_keycode = keymap[keycode][0];
-            }
-#endif
-            /* if undefined, use got keycode as it is */
-            if (pseudo_keycode == 0x00) {
-                if (shift_modded) {
-                    pseudo_keycode = S(keycode);
-                } else {
-                    pseudo_keycode = keycode;
-                }
-            }
-            break;
-        default:
-            if (shift_modded) {
-                pseudo_keycode = S(keycode);
-            } else {
-                pseudo_keycode = keycode;
-            }
-            break;
-    }
-    return pseudo_keycode;
+  switch (keycode) {
+    case KC_A ... KC_CAPSLOCK:
+      #if defined(__AVR__) 
+        if (shift_modded) {
+          pseudo_keycode = pgm_read_word(&keymap[keycode][1]);
+        } else {
+          pseudo_keycode = pgm_read_word(&keymap[keycode][0]);
+        }
+      #else
+        if (shift_modded) {
+          pseudo_keycode = keymap[keycode][1];
+        } else {
+          pseudo_keycode = keymap[keycode][0];
+        }
+      #endif
+      /* if undefined, use got keycode as it is */
+      if (pseudo_keycode == 0x00) {
+        if (shift_modded) {
+          pseudo_keycode = S(keycode);
+        } else {
+          pseudo_keycode = keycode;
+        }
+      }
+      break;
+    default:
+      if (shift_modded) {
+        pseudo_keycode = S(keycode);
+      } else {
+        pseudo_keycode = keycode;
+      }
+      break;
+  }
+  return pseudo_keycode;
 }
 
 uint8_t get_shift_bit(uint16_t keycode) {
-    if ((keycode >> 3) < SHIFT_BIT_SIZE) {
-        return send_key_shift_bit[keycode >> 3] & (1 << (keycode & 7));
-    } else {
-        dprintf("get_shift_bit: Can't get shift bit. keycode: %02X\n", keycode);
-        return 0;
-    }
+  if ((keycode >> 3) < SHIFT_BIT_SIZE) {
+    return send_key_shift_bit[keycode >> 3] & (1 << (keycode & 7));
+  } else {
+    dprintf("get_shift_bit: Can't get shift bit. keycode: %02X\n", keycode);
+    return 0;
+  }
 }
 
 void add_shift_bit(uint16_t keycode) {
-    if ((keycode >> 3) < SHIFT_BIT_SIZE) {
-        send_key_shift_bit[keycode >> 3] |= (1 << (keycode & 7));
-    } else {
-        dprintf("add_shift_bit: Can't add shift bit. keycode: %02X\n", keycode);
-    }
+  if ((keycode >> 3) < SHIFT_BIT_SIZE) {
+    send_key_shift_bit[keycode >> 3] |= (1 << (keycode & 7));
+  } else {
+    dprintf("add_shift_bit: Can't add shift bit. keycode: %02X\n", keycode);
+  }
 }
 
 void del_shift_bit(uint16_t keycode) {
-    if ((keycode >> 3) < SHIFT_BIT_SIZE) {
-        send_key_shift_bit[keycode >> 3] &= ~(1 << (keycode & 7));
-    } else {
-        dprintf("del_shift_bit: Can't delete shift bit. keycode: %02X\n", keycode);
-    }
+  if ((keycode >> 3) < SHIFT_BIT_SIZE) {
+    send_key_shift_bit[keycode >> 3] &= ~(1 << (keycode & 7));
+  } else {
+    dprintf("del_shift_bit: Can't delete shift bit. keycode: %02X\n", keycode);
+  }
 }

keyboards/comet46/keymaps/satt/config.h

@@ -0,0 +1,34 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+  keyboard_report->mods == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \
+)
+
+/* Use I2C or Serial */
+
+#define USE_I2C
+#define SSD1306OLED
+
+#endif

keyboards/comet46/keymaps/satt/keymap.c

@@ -4,64 +4,96 @@
 #include QMK_KEYBOARD_H
 #include "keymap_jis2us.h"
 #include "action_pseudo_lut.h"
+#include "keymap_jp.h"
+#ifdef SSD1306OLED
+  #include "ssd1306.h"
+#endif
 
 // Each layer gets a name for readability, which is then used in the keymap matrix below.
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
 // Layer names don't all need to be of the same length, obviously, and you can also skip them
 // entirely and just use numbers.
 enum comet46_layers {
-    _QWERTY,
-    _LOWER,
-    _RAISE,
-    _PSEUDO_US,
-    _PSEUDO_US_LOWER,
-    _PSEUDO_US_RAISE,
-    _ADJUST
+  _QWERTY,
+  _LOWER,
+  _RAISE,
+  _PSEUDO_US,
+  _PSEUDO_US_LOWER,
+  _PSEUDO_US_RAISE,
+  _ADJUST
 };
 
 enum custom_keycodes {
   QWERTY = SAFE_RANGE,
   PSEUDO_US,
+  JIS2US,
 };
 
-#define KC_LWR MO(_LOWER)
-#define KC_RSE MO(_RAISE)
+// JIS keycodes
+#define KC_JZHT JP_ZHTG  // hankaku/zenkaku|kanzi
+#define KC_JCIR JP_CIRC  // ^, ~
+#define KC_JAT  JP_AT    // @, `
+#define KC_JLBR JP_LBRC  // [, {
+#define KC_JCOL JP_COLN  // :, *
+#define KC_JRBR JP_RBRC  // ], }
+#define KC_JBSL JP_BSLS  // \, _
+#define KC_JMHE JP_MHEN  // muhenkan
+#define KC_JHEN JP_HENK  // henkan
+#define KC_JKAN JP_KANA  // katakana/hiragana|ro-mazi
+#define KC_JMKA JP_MKANA //kana on MacOSX
+#define KC_JMEI JP_MEISU //eisu on MacOSX
+#define KC_JAMP JP_AMPR  // &
+#define KC_JQUO JP_QUOT  // '
+#define KC_JLPR JP_LPRN  // (
+#define KC_JRPR JP_RPRN  // )
+#define KC_JEQL JP_EQL   // =
+#define KC_JTIL JP_TILD  // ~
+#define KC_JPIP JP_PIPE  // |
+#define KC_JGRV JP_GRV   // `
+#define KC_JLCB JP_LCBR  // {
+#define KC_JPLU JP_PLUS  // +
+#define KC_JAST JP_ASTR  // *
+#define KC_JRCB JP_RCBR  // }
+#define KC_JUND JP_UNDS  // _
+
+// Layer related keycodes
+#define KC_LWR  MO(_LOWER)
+#define KC_RSE  MO(_RAISE)
 #define KC_P_LW MO(_PSEUDO_US_LOWER)
 #define KC_P_RS MO(_PSEUDO_US_RAISE)
 #define KC_QWRT QWERTY
 #define KC_P_US PSEUDO_US
+#define KC_J2US JIS2US
+
+// Special keycodes
 #define KC_SPCT CTL_T(KC_SPC)
 #define KC_ENSF SFT_T(KC_ENT)
-#define KC_SFTA SFT_T(KC_A)
-#define KC_CTSF S(KC_LCTL)
+#define KC_CAEC MT(MOD_LCTL | MOD_LALT, KC_ESC)
+#define KC_CSTB C_S_T(KC_TAB)
 #define KC_IMON ALT_T(KC_F13)
 #define KC_IMOF GUI_T(KC_F14)
-#define KC_SRO S(KC_RO)
-#define KC_SYEN S(KC_JYEN)
 #define KC_CAD LCA(KC_DEL)
 #define KC_RST RESET
 
-#define LONGPRESS_DELAY 150
-
 // Fillers to make layering more clear
-#define KC_ KC_TRNS 
+#define KC_ KC_TRNS
 #define KC_XXXX KC_NO
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-  [_QWERTY] = LAYOUT_kc(  
+  [_QWERTY] = LAYOUT_kc(
   //,----+----+----+----+----+----+               +----+----+----+----+----+----.
-     ESC , Q  , W  , E  , R  , T  ,                 Y  , U  , I  , O  , P  ,DEL ,
+     CAEC, Q  , W  , E  , R  , T  ,                 Y  , U  , I  , O  , P  ,DEL ,
   //|----+----+----+----+----+----+----+     +----+----+----+----+----+----+----|
-     TAB ,SFTA, S  , D  , F  , G  ,LPRN,      RPRN, H  , J  , K  , L  ,SCLN,BSPC,
+     CSTB, A  , S  , D  , F  , G  ,LPRN,      RPRN, H  , J  , K  , L  ,SCLN,BSPC,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
-     CTSF, Z  , X  , C  , V  , B  ,LBRC,      RBRC, N  , M  ,COMM,DOT ,SLSH,QUOT,
+     LSFT, Z  , X  , C  , V  , B  ,LBRC,      RBRC, N  , M  ,COMM,DOT ,SLSH,QUOT,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
                          IMOF,LWR ,SPCT,      ENSF,RSE ,IMON
   //                    +----+----+---/       \---+----+----+
   ),
 
-  [_LOWER] = LAYOUT_kc(  
+  [_LOWER] = LAYOUT_kc(
   //,----+----+----+----+----+----+               +----+----+----+----+----+----.
          ,EXLM, AT ,HASH,DLR ,PERC,                CIRC,AMPR,ASTR,LPRN,RPRN,    ,
   //|----+----+----+----+----+----+----+     +----+----+----+----+----+----+----|
@@ -69,60 +101,60 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
          , F7 , F8 , F9 , F10, F11, F12,      TILD,PIPE,UNDS,PLUS,LCBR,RCBR,    ,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
-                             ,    ,    ,          ,    ,    
+                             ,    ,    ,          ,    ,
   //                    +----+----+---/       \---+----+----+
   ),
 
-  [_RAISE] = LAYOUT_kc(  
+  [_RAISE] = LAYOUT_kc(
   //,----+----+----+----+----+----+               +----+----+----+----+----+----.
          , 1  , 2  , 3  , 4  , 5  ,                 6  , 7  , 8  , 9  , 0  ,    ,
   //|----+----+----+----+----+----+----+     +----+----+----+----+----+----+----|
          ,    ,    ,    ,    ,    ,    ,      XXXX,LEFT,DOWN, UP ,RGHT,END ,    ,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
-         ,    ,    ,    ,    ,    ,    ,      HOME,XXXX,XXXX,XXXX,XXXX,XXXX,    ,
+         ,    ,    ,    ,    ,    ,    ,      HOME,XXXX,PGDN,PGUP,XXXX,XXXX,    ,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
-                             ,    ,    ,          ,    ,    
+                             ,    ,    ,          ,    ,
   //                    +----+----+---/       \---+----+----+
   ),
 
-  [_PSEUDO_US] = LAYOUT_kc(  
+  [_PSEUDO_US] = LAYOUT_kc(
   //,----+----+----+----+----+----+               +----+----+----+----+----+----.
-     ESC , Q  , W  , E  , R  , T  ,                 Y  , U  , I  , O  , P  ,DEL ,
+     CAEC, Q  , W  , E  , R  , T  ,                 Y  , U  , I  , O  , P  ,DEL ,
   //|----+----+----+----+----+----+----+     +----+----+----+----+----+----+----|
-     TAB ,SFTA, S  , D  , F  , G  ,ASTR,      LPRN, H  , J  , K  , L  ,FN0 ,BSPC,
+     CSTB, A  , S  , D  , F  , G  ,JLPR,      JRPR, H  , J  , K  , L  ,J2US,BSPC,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
-     CTSF, Z  , X  , C  , V  , B  ,FN0 ,      FN0 , N  , M  ,COMM,DOT ,SLSH,FN0 ,
+     LSFT, Z  , X  , C  , V  , B  ,J2US,      J2US, N  , M  ,COMM,DOT ,SLSH,J2US,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
                          IMOF,P_LW,SPCT,      ENSF,P_RS,IMON
   //                    +----+----+---/       \---+----+----+
   ),
 
 
-  [_PSEUDO_US_LOWER] = LAYOUT_kc(  
+  [_PSEUDO_US_LOWER] = LAYOUT_kc(
   //,----+----+----+----+----+----+               +----+----+----+----+----+----.
-         ,EXLM,LBRC,HASH,DLR ,PERC,                EQL ,CIRC, DQT,ASTR,LPRN,    ,
+         ,EXLM,JAT ,HASH,DLR ,PERC,                JCIR,JAMP,JAST,JLPR,JRPR,    ,
   //|----+----+----+----+----+----+----+     +----+----+----+----+----+----+----|
-         , F1 , F2 , F3 , F4 , F5 , F6 ,      LCBR,JYEN,MINS,UNDS,RBRC,BSLS,    ,
+         , F1 , F2 , F3 , F4 , F5 , F6 ,      JGRV,JBSL,MINS,JEQL,JLBR,JRBR,    ,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
-         , F7 , F8 , F9 , F10, F11, F12,      PLUS,SYEN,SRO ,COLN,RCBR,PIPE,    ,
+         , F7 , F8 , F9 , F10, F11, F12,      JTIL,JPIP,JUND,JPLU,JLCB,JRCB,    ,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
-                             ,    ,    ,          ,    ,    
+                             ,    ,    ,          ,    ,
   //                    +----+----+---/       \---+----+----+
   ),
 
-  [_PSEUDO_US_RAISE] = LAYOUT_kc(  
+  [_PSEUDO_US_RAISE] = LAYOUT_kc(
   //,----+----+----+----+----+----+               +----+----+----+----+----+----.
          , 1  , 2  , 3  , 4  , 5  ,                 6  , 7  , 8  , 9  , 0  ,    ,
   //|----+----+----+----+----+----+----+     +----+----+----+----+----+----+----|
-         ,    ,    ,    ,    ,    , GRV,      XXXX,LEFT,DOWN, UP ,RGHT,END ,    ,
+         ,    ,    ,    ,    ,    ,JZHT,      XXXX,LEFT,DOWN, UP ,RGHT,END ,    ,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
-         ,    ,    ,    ,    ,    ,    ,      HOME,XXXX,XXXX,XXXX,XXXX,XXXX,    ,
+         ,    ,    ,    ,    ,    ,    ,      HOME,XXXX,PGDN,PGUP,XXXX,XXXX,    ,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
-                             ,    ,    ,          ,    ,    
+                             ,    ,    ,          ,    ,
   //                    +----+----+---/       \---+----+----+
   ),
 
-  [_ADJUST] = LAYOUT_kc(  
+  [_ADJUST] = LAYOUT_kc(
   //,----+----+----+----+----+----+               +----+----+----+----+----+----.
          ,    ,    ,    ,    ,    ,                    ,    ,    ,    ,    ,    ,
   //|----+----+----+----+----+----+----+     +----+----+----+----+----+----+----|
@@ -130,69 +162,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
          ,    ,    ,    ,    ,    ,RST ,      P_US,    ,    ,    ,    ,    ,    ,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
-                             ,    ,    ,          ,    ,    
+                             ,    ,    ,          ,    ,
   //                    +----+----+---/       \---+----+----+
   )
 
 };
 
-
-/*
- * user defined action function
- */
-enum function_id {
-    PSEUDO_US_FUNCTION,
-};
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
-    switch (id)
-    {
-    case PSEUDO_US_FUNCTION:
-        action_pseudo_lut(record, _QWERTY, keymap_jis2us);
-        break;
-    }
-}
-
-/*
- * Fn action definition
- */
-const uint16_t PROGMEM fn_actions[] = {
-    [0] = ACTION_FUNCTION(PSEUDO_US_FUNCTION),
-};
-
-void matrix_scan_user(void) {
-    uint8_t layer = biton32(layer_state);
-    switch (layer) {
-      case _LOWER:
-          set_led_red;
-          break;
-      case _RAISE:
-          set_led_blue;
-          break;
-      case _PSEUDO_US_LOWER:
-          set_led_yellow;
-          break;
-      case _PSEUDO_US_RAISE:
-          set_led_cyan;
-          break;
-      case _ADJUST:
-          set_led_magenta;
-          break;
-      default:
-          set_led_green;
-          break;
-    }
-};
-
 uint32_t layer_state_set_user(uint32_t state) {
   switch (biton32(state)) {
-    case _PSEUDO_US:
-      return update_tri_layer_state(state, _PSEUDO_US_RAISE, _PSEUDO_US_LOWER, _ADJUST);
-      break;
     case _PSEUDO_US_LOWER:
-      return update_tri_layer_state(state, _PSEUDO_US_RAISE, _PSEUDO_US_LOWER, _ADJUST);
-      break;
-    case _PSEUDO_US_RAISE: 
+    case _PSEUDO_US_RAISE:
       return update_tri_layer_state(state, _PSEUDO_US_RAISE, _PSEUDO_US_LOWER, _ADJUST);
       break;
     default:
@@ -201,19 +180,112 @@ uint32_t layer_state_set_user(uint32_t state) {
   }
 }
 
+//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
+#ifdef SSD1306OLED
+
+// You need to add source files to SRC in rules.mk when using OLED display functions
+void set_keylog(uint16_t keycode);
+const char *read_keylog(void);
+const char *read_modifier_state(void);
+const char *read_host_led_state(void);
+
+void matrix_init_user(void) {
+  iota_gfx_init(false);   // turns on the display
+}
+
+void matrix_scan_user(void) {
+  iota_gfx_task();  // this is what updates the display continuously
+}
+
+void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
+  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+    memcpy(dest->display, source->display, sizeof(dest->display));
+    dest->dirty = true;
+  }
+}
+
+void render_status(struct CharacterMatrix *matrix) {
+  // Layer state
+  char layer_str[22];
+  matrix_write(matrix, "Layer: ");
+  uint8_t layer = biton32(layer_state);
+  uint8_t default_layer = biton32(eeconfig_read_default_layer());
+    switch (layer) {
+      case _QWERTY:
+        switch (default_layer) {
+          case _QWERTY:
+            snprintf(layer_str, sizeof(layer_str), "Qwerty");
+            break;
+          case _PSEUDO_US:
+            snprintf(layer_str, sizeof(layer_str), "Psuedo_US");
+            break;
+          default:
+            snprintf(layer_str, sizeof(layer_str), "Undef-%d", default_layer);
+            break;
+        }
+        break;
+      case _RAISE:
+        snprintf(layer_str, sizeof(layer_str), "Raise");
+        break;
+      case _LOWER:
+        snprintf(layer_str, sizeof(layer_str), "Lower");
+        break;
+      case _PSEUDO_US_RAISE:
+        snprintf(layer_str, sizeof(layer_str), "P_US_Raise");
+        break;
+      case _PSEUDO_US_LOWER:
+        snprintf(layer_str, sizeof(layer_str), "P_US_Lower");
+        break;
+      case _ADJUST:
+        snprintf(layer_str, sizeof(layer_str), "Adjust");
+        break;
+      default:
+        snprintf(layer_str, sizeof(layer_str), "Undef-%d", layer);
+    }
+  matrix_write_ln(matrix, layer_str);
+  // Last entered keycode
+  matrix_write_ln(matrix, read_keylog());
+  // Modifier state
+  matrix_write_ln(matrix, read_modifier_state());
+  // Host Keyboard LED Status
+  matrix_write(matrix, read_host_led_state());
+}
+
+void iota_gfx_task_user(void) {
+  struct CharacterMatrix matrix;
+
+#if DEBUG_TO_SCREEN
+  if (debug_enable) {
+    return;
+  }
+#endif
+
+  matrix_clear(&matrix);
+  render_status(&matrix);
+  matrix_update(&display, &matrix);
+}
+
+#endif//SSD1306OLED
+
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  #ifdef SSD1306OLED
+    if (record->event.pressed) {
+      set_keylog(keycode);
+    }
+  #endif
   switch (keycode) {
     case QWERTY:
       if (record->event.pressed) {
         set_single_persistent_default_layer(_QWERTY);
       }
-      return false;
       break;
     case PSEUDO_US:
       if (record->event.pressed) {
         set_single_persistent_default_layer(_PSEUDO_US);
       }
-      return false;
+      break;
+    case JIS2US:
+      action_pseudo_lut(record, _QWERTY, keymap_jis2us);
       break;
   }
   return true;

keyboards/comet46/keymaps/satt/keymap_jis2us.h

@@ -3,30 +3,30 @@
 
 /* keymap for convert from JIS to US */
 const uint16_t PROGMEM keymap_jis2us[][2] = {
-    [KC_A ... KC_CAPS] = { 0x00, 0x00 }, /* default value */
+  [KC_A ... KC_CAPS] = { 0x00, 0x00 }, /* default value */
 
-    [KC_1]    = { KC_1,    KC_EXLM    }, /* 1 and ! -> 1 and ! */
-    [KC_2]    = { KC_2,    KC_LBRC    }, /* 2 and " -> 2 and @ */
-    [KC_3]    = { KC_3,    KC_HASH    }, /* 3 and # -> 3 and # */
-    [KC_4]    = { KC_4,    KC_DLR     }, /* 4 and $ -> 4 and $ */
-    [KC_5]    = { KC_5,    KC_PERC    }, /* 5 and % -> 5 and % */
-    [KC_6]    = { KC_6,    KC_EQL     }, /* 6 and & -> 6 and ^ */
-    [KC_7]    = { KC_7,    KC_CIRC    }, /* 7 and ' -> 7 and & */
-    [KC_8]    = { KC_8,    KC_DQT     }, /* 8 and ( -> 8 and * */
-    [KC_9]    = { KC_9,    KC_ASTR    }, /* 9 and ) -> 9 and ( */
-    [KC_0]    = { KC_0,    KC_LPRN    }, /* 0 and (no assign) -> 0 and ) */
-    [KC_MINS] = { KC_MINS, S(KC_RO)   }, /* - and = -> - and _ */
-    [KC_EQL]  = { KC_UNDS, KC_COLN    }, /* ^ and ~ -> = and + */
-    [KC_LBRC] = { KC_RBRC, KC_RCBR    }, /* @ and ` -> [ and { */
-    [KC_RBRC] = { KC_BSLS, KC_PIPE    }, /* [ and { -> ] and } */
-    [KC_BSLS] = { KC_JYEN, S(KC_JYEN) }, /* ] and } -> / and | */
-    [KC_NUHS] = { KC_NUHS, S(KC_NUHS) }, /* (no assign) */
-    [KC_SCLN] = { KC_SCLN, KC_QUOT    }, /* ; and + -> ; and : */
-    [KC_QUOT] = { KC_AMPR, KC_AT      }, /* : and * -> ' and " */
-    [KC_GRV]  = { KC_LCBR, KC_PLUS    }, /* (no assign) -> ` and ~ */
-    [KC_COMM] = { KC_COMM, KC_LT      }, /* , and < -> , and < */
-    [KC_DOT]  = { KC_DOT,  KC_GT      }, /* . and > -> . and > */
-    [KC_SLSH] = { KC_SLSH, KC_QUES    }, /* / and ? -> / and ? */
+  [KC_1]    = { KC_1,    KC_EXLM    }, /* 1 and ! -> 1 and ! */
+  [KC_2]    = { KC_2,    KC_LBRC    }, /* 2 and " -> 2 and @ */
+  [KC_3]    = { KC_3,    KC_HASH    }, /* 3 and # -> 3 and # */
+  [KC_4]    = { KC_4,    KC_DLR     }, /* 4 and $ -> 4 and $ */
+  [KC_5]    = { KC_5,    KC_PERC    }, /* 5 and % -> 5 and % */
+  [KC_6]    = { KC_6,    KC_EQL     }, /* 6 and & -> 6 and ^ */
+  [KC_7]    = { KC_7,    KC_CIRC    }, /* 7 and ' -> 7 and & */
+  [KC_8]    = { KC_8,    KC_DQT     }, /* 8 and ( -> 8 and * */
+  [KC_9]    = { KC_9,    KC_ASTR    }, /* 9 and ) -> 9 and ( */
+  [KC_0]    = { KC_0,    KC_LPRN    }, /* 0 and (no assign) -> 0 and ) */
+  [KC_MINS] = { KC_MINS, S(KC_RO)   }, /* - and = -> - and _ */
+  [KC_EQL]  = { KC_UNDS, KC_COLN    }, /* ^ and ~ -> = and + */
+  [KC_LBRC] = { KC_RBRC, KC_RCBR    }, /* @ and ` -> [ and { */
+  [KC_RBRC] = { KC_BSLS, KC_PIPE    }, /* [ and { -> ] and } */
+  [KC_BSLS] = { KC_JYEN, S(KC_JYEN) }, /* ] and } -> / and | */
+  [KC_NUHS] = { KC_NUHS, S(KC_NUHS) }, /* (no assign) */
+  [KC_SCLN] = { KC_SCLN, KC_QUOT    }, /* ; and + -> ; and : */
+  [KC_QUOT] = { KC_AMPR, KC_AT      }, /* : and * -> ' and " */
+  [KC_GRV]  = { KC_LCBR, KC_PLUS    }, /* (no assign) -> ` and ~ */
+  [KC_COMM] = { KC_COMM, KC_LT      }, /* , and < -> , and < */
+  [KC_DOT]  = { KC_DOT,  KC_GT      }, /* . and > -> . and > */
+  [KC_SLSH] = { KC_SLSH, KC_QUES    }, /* / and ? -> / and ? */
 };
 
 #endif

keyboards/comet46/keymaps/satt/rules.mk

@@ -1,26 +1,7 @@
 SRC += action_pseudo_lut.c
 
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = no       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = no        # Commands for debug and configuration
-NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = no           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
-ONEHAND_ENABLE = no        # Enable one-hand typing
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif
+# If you want to change display settings of the OLED, you need to change the following lines
+SRC +=  ./lib/glcdfont.c \
+		./lib/keylogger.c \
+        ./lib/modifier_state_reader.c \
+        ./lib/host_led_state_reader.c

keyboards/comet46/lib/glcdfont.c

@@ -0,0 +1,148 @@
+// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0.
+// See gfxfont.h for newer custom bitmap font info.
+
+#ifndef FONT5X7_H
+#define FONT5X7_H
+
+#ifdef __AVR__
+ #include <avr/io.h>
+ #include <avr/pgmspace.h>
+#elif defined(ESP8266)
+ #include <pgmspace.h>
+#else
+ #define PROGMEM
+#endif
+
+// Standard ASCII 5x7 font
+
+const unsigned char font[] PROGMEM = {
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00,
+  0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00,
+  0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00,
+  0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00,
+  0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00,
+  0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00,
+  0x00, 0x18, 0x3C, 0x18, 0x00, 0x00,
+  0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00,
+  0x00, 0x18, 0x24, 0x18, 0x00, 0x00,
+  0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00,
+  0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00,
+  0x26, 0x29, 0x79, 0x29, 0x26, 0x00,
+  0x40, 0x7F, 0x05, 0x05, 0x07, 0x00,
+  0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00,
+  0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00,
+  0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00,
+  0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00,
+  0x14, 0x22, 0x7F, 0x22, 0x14, 0x00,
+  0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00,
+  0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00,
+  0x00, 0x66, 0x89, 0x95, 0x6A, 0x00,
+  0x60, 0x60, 0x60, 0x60, 0x60, 0x00,
+  0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00,
+  0x08, 0x04, 0x7E, 0x04, 0x08, 0x00,
+  0x10, 0x20, 0x7E, 0x20, 0x10, 0x00,
+  0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00,
+  0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00,
+  0x1E, 0x10, 0x10, 0x10, 0x10, 0x00,
+  0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00,
+  0x30, 0x38, 0x3E, 0x38, 0x30, 0x00,
+  0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x5F, 0x00, 0x00, 0x00,
+  0x00, 0x07, 0x00, 0x07, 0x00, 0x00,
+  0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00,
+  0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00,
+  0x23, 0x13, 0x08, 0x64, 0x62, 0x00,
+  0x36, 0x49, 0x56, 0x20, 0x50, 0x00,
+  0x00, 0x08, 0x07, 0x03, 0x00, 0x00,
+  0x00, 0x1C, 0x22, 0x41, 0x00, 0x00,
+  0x00, 0x41, 0x22, 0x1C, 0x00, 0x00,
+  0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00,
+  0x08, 0x08, 0x3E, 0x08, 0x08, 0x00,
+  0x00, 0x80, 0x70, 0x30, 0x00, 0x00,
+  0x08, 0x08, 0x08, 0x08, 0x08, 0x00,
+  0x00, 0x00, 0x60, 0x60, 0x00, 0x00,
+  0x20, 0x10, 0x08, 0x04, 0x02, 0x00,
+  0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00,
+  0x00, 0x42, 0x7F, 0x40, 0x00, 0x00,
+  0x72, 0x49, 0x49, 0x49, 0x46, 0x00,
+  0x21, 0x41, 0x49, 0x4D, 0x33, 0x00,
+  0x18, 0x14, 0x12, 0x7F, 0x10, 0x00,
+  0x27, 0x45, 0x45, 0x45, 0x39, 0x00,
+  0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00,
+  0x41, 0x21, 0x11, 0x09, 0x07, 0x00,
+  0x36, 0x49, 0x49, 0x49, 0x36, 0x00,
+  0x46, 0x49, 0x49, 0x29, 0x1E, 0x00,
+  0x00, 0x00, 0x14, 0x00, 0x00, 0x00,
+  0x00, 0x40, 0x34, 0x00, 0x00, 0x00,
+  0x00, 0x08, 0x14, 0x22, 0x41, 0x00,
+  0x14, 0x14, 0x14, 0x14, 0x14, 0x00,
+  0x00, 0x41, 0x22, 0x14, 0x08, 0x00,
+  0x02, 0x01, 0x59, 0x09, 0x06, 0x00,
+  0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00,
+  0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00,
+  0x7F, 0x49, 0x49, 0x49, 0x36, 0x00,
+  0x3E, 0x41, 0x41, 0x41, 0x22, 0x00,
+  0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00,
+  0x7F, 0x49, 0x49, 0x49, 0x41, 0x00,
+  0x7F, 0x09, 0x09, 0x09, 0x01, 0x00,
+  0x3E, 0x41, 0x41, 0x51, 0x73, 0x00,
+  0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00,
+  0x00, 0x41, 0x7F, 0x41, 0x00, 0x00,
+  0x20, 0x40, 0x41, 0x3F, 0x01, 0x00,
+  0x7F, 0x08, 0x14, 0x22, 0x41, 0x00,
+  0x7F, 0x40, 0x40, 0x40, 0x40, 0x00,
+  0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00,
+  0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00,
+  0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00,
+  0x7F, 0x09, 0x09, 0x09, 0x06, 0x00,
+  0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00,
+  0x7F, 0x09, 0x19, 0x29, 0x46, 0x00,
+  0x26, 0x49, 0x49, 0x49, 0x32, 0x00,
+  0x03, 0x01, 0x7F, 0x01, 0x03, 0x00,
+  0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00,
+  0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00,
+  0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00,
+  0x63, 0x14, 0x08, 0x14, 0x63, 0x00,
+  0x03, 0x04, 0x78, 0x04, 0x03, 0x00,
+  0x61, 0x59, 0x49, 0x4D, 0x43, 0x00,
+  0x00, 0x7F, 0x41, 0x41, 0x41, 0x00,
+  0x02, 0x04, 0x08, 0x10, 0x20, 0x00,
+  0x00, 0x41, 0x41, 0x41, 0x7F, 0x00,
+  0x04, 0x02, 0x01, 0x02, 0x04, 0x00,
+  0x40, 0x40, 0x40, 0x40, 0x40, 0x00,
+  0x00, 0x03, 0x07, 0x08, 0x00, 0x00,
+  0x20, 0x54, 0x54, 0x78, 0x40, 0x00,
+  0x7F, 0x28, 0x44, 0x44, 0x38, 0x00,
+  0x38, 0x44, 0x44, 0x44, 0x28, 0x00,
+  0x38, 0x44, 0x44, 0x28, 0x7F, 0x00,
+  0x38, 0x54, 0x54, 0x54, 0x18, 0x00,
+  0x00, 0x08, 0x7E, 0x09, 0x02, 0x00,
+  0x18, 0xA4, 0xA4, 0x9C, 0x78, 0x00,
+  0x7F, 0x08, 0x04, 0x04, 0x78, 0x00,
+  0x00, 0x44, 0x7D, 0x40, 0x00, 0x00,
+  0x20, 0x40, 0x40, 0x3D, 0x00, 0x00,
+  0x7F, 0x10, 0x28, 0x44, 0x00, 0x00,
+  0x00, 0x41, 0x7F, 0x40, 0x00, 0x00,
+  0x7C, 0x04, 0x78, 0x04, 0x78, 0x00,
+  0x7C, 0x08, 0x04, 0x04, 0x78, 0x00,
+  0x38, 0x44, 0x44, 0x44, 0x38, 0x00,
+  0xFC, 0x18, 0x24, 0x24, 0x18, 0x00,
+  0x18, 0x24, 0x24, 0x18, 0xFC, 0x00,
+  0x7C, 0x08, 0x04, 0x04, 0x08, 0x00,
+  0x48, 0x54, 0x54, 0x54, 0x24, 0x00,
+  0x04, 0x04, 0x3F, 0x44, 0x24, 0x00,
+  0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00,
+  0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00,
+  0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00,
+  0x44, 0x28, 0x10, 0x28, 0x44, 0x00,
+  0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00,
+  0x44, 0x64, 0x54, 0x4C, 0x44, 0x00,
+  0x00, 0x08, 0x36, 0x41, 0x00, 0x00,
+  0x00, 0x00, 0x77, 0x00, 0x00, 0x00,
+  0x00, 0x41, 0x36, 0x08, 0x00, 0x00,
+  0x02, 0x01, 0x02, 0x04, 0x02, 0x00,
+  0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00
+};
+#endif // FONT5X7_H

keyboards/comet46/lib/host_led_state_reader.c

@@ -0,0 +1,15 @@
+#include <stdio.h>
+#include "comet46.h"
+
+char host_led_state_str[22];
+
+const char *read_host_led_state(void) {
+  uint8_t leds = host_keyboard_leds();
+
+  snprintf(host_led_state_str, sizeof(host_led_state_str), "Lock: %s%s%s",
+           (leds & (1 << USB_LED_CAPS_LOCK)) ? "CAPL " : "",
+           (leds & (1 << USB_LED_SCROLL_LOCK)) ? "SCRL " : "",
+           (leds & (1 << USB_LED_NUM_LOCK)) ? "NUML" : "");
+
+  return host_led_state_str;
+}

keyboards/comet46/lib/keylogger.c

@@ -0,0 +1,294 @@
+#include <stdio.h>
+
+#ifdef __AVR__
+ #include <avr/io.h>
+ #include <avr/pgmspace.h>
+#else
+ #define PROGMEM
+#endif
+
+#define NUM_USB_HID_KEYCODES 255
+#define LEN_KEYCODE_STR 4
+
+char keylog[22] = {"KC:       ID: "};
+
+// Quick and dirty way to display USB HID keycodes used in QMK
+// USB HID keycodes from 0x0000 to 0x00FF are stored in a 4x256+1 length char
+const char code_to_name[] PROGMEM = {
+  "NO  " //0x00
+  "TRNS"
+  "?   "
+  "?   "
+  "A   "
+  "B   "
+  "C   "
+  "D   "
+  "E   "
+  "F   "
+  "G   "
+  "H   "
+  "I   "
+  "J   "
+  "K   "
+  "L   "
+  "M   " //0x10
+  "N   "
+  "O   "
+  "P   "
+  "Q   "
+  "R   "
+  "S   "
+  "T   "
+  "U   "
+  "V   "
+  "W   "
+  "X   "
+  "Y   "
+  "Z   "
+  "1   "
+  "2   "
+  "3   "  //0x20
+  "4   "
+  "5   "
+  "6   "
+  "7   "
+  "8   "
+  "9   "
+  "0   "
+  "ENT "
+  "ESC "
+  "BSPC"
+  "TAB "
+  "SPC "
+  "MINS"
+  "EQL "
+  "LBRC"
+  "RBRC" //0x30
+  "BSLS"
+  "NUHS"
+  "SCLN"
+  "QUOT"
+  "GRV "
+  "COMM"
+  "DOT "
+  "SLSH"
+  "CAPS"
+  "F1  "
+  "F2  "
+  "F3  "
+  "F4  "
+  "F5  "
+  "F6  "
+  "F7  " //0x40
+  "F8  "
+  "F9  "
+  "F10 "
+  "F11 "
+  "F12 "
+  "PSCR"
+  "SLCK"
+  "PAUS"
+  "INS "
+  "HOME"
+  "PGUP"
+  "DEL "
+  "END "
+  "PGDN"
+  "RGHT"
+  "LEFT" //0x50
+  "DOWN"
+  "UP  "
+  "NLCK"
+  "PSLS"
+  "PAST"
+  "PMNS"
+  "PPLS"
+  "PENT"
+  "P1  "
+  "P2  "
+  "P3  "
+  "P4  "
+  "P5  "
+  "P6  "
+  "P7  "
+  "P8  " //0x60
+  "P9  "
+  "P0  "
+  "PDOT"
+  "NUBS"
+  "APP "
+  "POW "
+  "PEQL"
+  "F13 "
+  "F14 "
+  "F15 "
+  "F16 "
+  "F17 "
+  "F18 "
+  "F19 "
+  "F20 "
+  "F21 " //0x70
+  "F22 "
+  "F23 "
+  "F24 "
+  "EXEC"
+  "HELP"
+  "MENU"
+  "SLCT"
+  "STOP"
+  "AGIN"
+  "UNDO"
+  "CUT "
+  "COPY"
+  "PSTE"
+  "FIND"
+  "_MUT"
+  "_VUP" //0x80
+  "_VDN"
+  "LCAP"
+  "LNUM"
+  "LSCR"
+  "PCMM"
+  "PEQA"
+  "INT1"
+  "INT2"
+  "INT3"
+  "INT4"
+  "INT5"
+  "INT6"
+  "INT7"
+  "INT8"
+  "INT9"
+  "LAN1" //0x90
+  "LAN2"
+  "LAN3"
+  "LAN4"
+  "LAN5"
+  "LAN6"
+  "LAN7"
+  "LAN8"
+  "LAN9"
+  "ERAS"
+  "SYSR"
+  "CNCL"
+  "CLR "
+  "PRIR"
+  "RTRN"
+  "SEP "
+  "OUT " //0xA0
+  "OPER"
+  "CLRA"
+  "CSEL"
+  "ESEL"
+  "PWR " //0xA5
+  "SLEP"
+  "WAKE"
+  "MUTE"
+  "VOLU"
+  "VOLD"
+  "MNXT"
+  "MPRV"
+  "MSTP"
+  "MPLY"
+  "MSEL"
+  "EJCT" //0xB0
+  "MAIL"
+  "CALC"
+  "MYCM"
+  "WSCH"
+  "WHOM"
+  "WBAK"
+  "WFWD"
+  "WSTP"
+  "WREF"
+  "WFAV"
+  "MFFD"
+  "MRWD"
+  "BRIU"
+  "BRID"
+  "?   "
+  "FN0 " //0xC0
+  "FN1 "
+  "FN2 "
+  "FN3 "
+  "FN4 "
+  "FN5 "
+  "FN6 "
+  "FN7 "
+  "FN8 "
+  "FN9 "
+  "FN10"
+  "FN11"
+  "FN12"
+  "FN13"
+  "FN14"
+  "FN15"
+  "FN16" //0xD0
+  "FN17"
+  "FN18"
+  "FN19"
+  "FN20"
+  "FN21"
+  "FN22"
+  "FN23"
+  "FN24"
+  "FN25"
+  "FN26"
+  "FN27"
+  "FN28"
+  "FN29"
+  "FN30"
+  "FN31"
+  "LCTL" //0xE0
+  "LSFT"
+  "LALT"
+  "LGUI"
+  "RCTL"
+  "RSFT"
+  "RALT"
+  "RGUI"
+  "?   "
+  "?   "
+  "?   "
+  "?   "
+  "?   "
+  "?   "
+  "?   "
+  "?   "
+  "MS_U" //0xF0
+  "MS_D"
+  "MS_L"
+  "MS_R"
+  "BTN1"
+  "BTN2"
+  "BTN3"
+  "BTN4"
+  "BTN5"
+  "WH_U"
+  "WH_D"
+  "WH_L"
+  "WH_R"
+  "ACL0"
+  "ACL1"
+  "ACL2"
+};
+
+void set_keylog(uint16_t keycode)
+{
+  char name[LEN_KEYCODE_STR+1] = "?   ";
+
+  if (keycode <= NUM_USB_HID_KEYCODES) {
+    for (uint8_t k = 0; k < LEN_KEYCODE_STR; k++) {
+      name[k] =  pgm_read_byte_near(code_to_name + keycode * LEN_KEYCODE_STR + k);
+    }
+  } else if (keycode > NUM_USB_HID_KEYCODES) {
+    snprintf(name, sizeof(name), "QMK ");
+  }
+
+  // update keylog
+  snprintf(keylog, sizeof(keylog), "KC: %s  ID: %d", name, keycode);
+}
+
+const char *read_keylog(void) {
+  return keylog;
+}

keyboards/comet46/lib/modifier_state_reader.c

@@ -0,0 +1,18 @@
+#include <stdio.h>
+#include "comet46.h"
+
+char modifier_state_str[22];
+
+const char *read_modifier_state(void) {
+  uint8_t modifiers = get_mods();
+  uint8_t one_shot = get_oneshot_mods();
+  
+  snprintf(modifier_state_str, sizeof(modifier_state_str), "Mod: %s%s%s%s",
+    (modifiers & MODS_CTRL_MASK || one_shot & MODS_CTRL_MASK) ? "CTL " : "",
+    (modifiers & MODS_GUI_MASK || one_shot & MODS_GUI_MASK) ? "GUI " : "",
+    (modifiers & MODS_ALT_MASK || one_shot & MODS_ALT_MASK) ? "ALT " : "",
+    (modifiers & MODS_SHIFT_MASK || one_shot & MODS_SHIFT_MASK) ? "SFT" : ""
+  );
+
+  return modifier_state_str;
+}

keyboards/comet46/readme.md

@@ -1,6 +1,6 @@
 # Comet46
 
-![Comet46](https://user-images.githubusercontent.com/39004890/42418180-d5bb188c-82d5-11e8-99fa-65020ce5ac5d.jpg)
+![Comet46](https://user-images.githubusercontent.com/39004890/50396817-a1660600-07af-11e9-8611-3156c635db43.jpg)
 
 A split wireless 40% column-staggered keyboard 
 
@@ -13,4 +13,5 @@ Make example for this keyboard (after setting up your build environment):
 
     make comet46:default
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+

keyboards/comet46/rules.mk

@@ -1,12 +1,8 @@
-
-OPT_DEFS += -DCOMET46_ORTHO_===PROMICRO
-COMET46_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
-                         avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
-
 # # project specific files
-SRC = matrix.c
-
-
+SRC += matrix.c \
+       i2c.c \
+       ssd1306.c 
+       
 # MCU name
 #MCU = at90usb1287
 MCU = atmega32u4
@@ -24,8 +20,6 @@ MCU = atmega32u4
 #     software delays.
 F_CPU = 16000000
 
-
-#
 # LUFA specific
 #
 # Target architecture (see library "Board Types" documentation).
@@ -48,7 +42,7 @@ F_USB = $(F_CPU)
 #     This definition is optional, and if your keyboard supports multiple bootloaders of
 #     different sizes, comment this out, and the correct address will be loaded 
 #     automatically (+60). See bootloader.mk for all options.
-BOOTLOADER = caterina
+# BOOTLOADER = caterina
 
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT

keyboards/comet46/ssd1306.c

@@ -0,0 +1,344 @@
+#ifdef SSD1306OLED
+
+#include "ssd1306.h"
+#include "i2c.h"
+#include <string.h>
+#include "print.h"
+#ifdef ADAFRUIT_BLE_ENABLE
+#include "adafruit_ble.h"
+#endif
+#ifdef PROTOCOL_LUFA
+#include "lufa.h"
+#endif
+#include "sendchar.h"
+#include "timer.h"
+
+static const unsigned char font[] PROGMEM;
+
+// Set this to 1 to help diagnose early startup problems
+// when testing power-on with ble.  Turn it off otherwise,
+// as the latency of printing most of the debug info messes
+// with the matrix scan, causing keys to drop.
+#define DEBUG_TO_SCREEN 0
+
+//static uint16_t last_battery_update;
+//static uint32_t vbat;
+//#define BatteryUpdateInterval 10000 /* milliseconds */
+
+// 'last_flush' is declared as uint16_t,
+// so this must be less than 65535 
+#define ScreenOffInterval 60000 /* milliseconds */
+#if DEBUG_TO_SCREEN
+static uint8_t displaying;
+#endif
+static uint16_t last_flush;
+
+static bool force_dirty = true;
+
+// Write command sequence.
+// Returns true on success.
+static inline bool _send_cmd1(uint8_t cmd) {
+  bool res = false;
+
+  if (i2c_start_write(SSD1306_ADDRESS)) {
+    xprintf("failed to start write to %d\n", SSD1306_ADDRESS);
+    goto done;
+  }
+
+  if (i2c_master_write(0x0 /* command byte follows */)) {
+    print("failed to write control byte\n");
+
+    goto done;
+  }
+
+  if (i2c_master_write(cmd)) {
+    xprintf("failed to write command %d\n", cmd);
+    goto done;
+  }
+  res = true;
+done:
+  i2c_master_stop();
+  return res;
+}
+
+// Write 2-byte command sequence.
+// Returns true on success
+static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) {
+  if (!_send_cmd1(cmd)) {
+    return false;
+  }
+  return _send_cmd1(opr);
+}
+
+// Write 3-byte command sequence.
+// Returns true on success
+static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) {
+  if (!_send_cmd1(cmd)) {
+    return false;
+  }
+  if (!_send_cmd1(opr1)) {
+    return false;
+  }
+  return _send_cmd1(opr2);
+}
+
+#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;}
+#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;}
+#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;}
+
+static void clear_display(void) {
+  matrix_clear(&display);
+
+  // Clear all of the display bits (there can be random noise
+  // in the RAM on startup)
+  send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1);
+  send_cmd3(ColumnAddr, 0, DisplayWidth - 1);
+
+  if (i2c_start_write(SSD1306_ADDRESS)) {
+    goto done;
+  }
+  if (i2c_master_write(0x40)) {
+    // Data mode
+    goto done;
+  }
+  for (uint8_t row = 0; row < MatrixRows; ++row) {
+    for (uint8_t col = 0; col < DisplayWidth; ++col) {
+      i2c_master_write(0);
+    }
+  }
+
+  display.dirty = false;
+
+done:
+  i2c_master_stop();
+}
+
+#if DEBUG_TO_SCREEN
+#undef sendchar
+static int8_t capture_sendchar(uint8_t c) {
+  sendchar(c);
+  iota_gfx_write_char(c);
+
+  if (!displaying) {
+    iota_gfx_flush();
+  }
+  return 0;
+}
+#endif
+
+bool iota_gfx_init(bool rotate) {
+  bool success = false;
+
+  i2c_master_init();
+  send_cmd1(DisplayOff);
+  send_cmd2(SetDisplayClockDiv, 0x80);
+  send_cmd2(SetMultiPlex, DisplayHeight - 1);
+
+  send_cmd2(SetDisplayOffset, 0);
+
+
+  send_cmd1(SetStartLine | 0x0);
+  send_cmd2(SetChargePump, 0x14 /* Enable */);
+  send_cmd2(SetMemoryMode, 0 /* horizontal addressing */);
+
+  if(rotate){
+    // the following Flip the display orientation 180 degrees
+    send_cmd1(SegRemap);
+    send_cmd1(ComScanInc);
+  }else{
+    // Flips the display orientation 0 degrees
+    send_cmd1(SegRemap | 0x1);
+    send_cmd1(ComScanDec);
+  }
+
+  send_cmd2(SetComPins, 0x2);
+  send_cmd2(SetContrast, 0x8f);
+  send_cmd2(SetPreCharge, 0xf1);
+  send_cmd2(SetVComDetect, 0x40);
+  send_cmd1(DisplayAllOnResume);
+  send_cmd1(NormalDisplay);
+  send_cmd1(DeActivateScroll);
+  send_cmd1(DisplayOn);
+
+  send_cmd2(SetContrast, 0); // Dim
+
+  clear_display();
+
+  success = true;
+
+  iota_gfx_flush();
+
+#if DEBUG_TO_SCREEN
+  print_set_sendchar(capture_sendchar);
+#endif
+
+done:
+  return success;
+}
+
+bool iota_gfx_off(void) {
+  bool success = false;
+
+  send_cmd1(DisplayOff);
+  success = true;
+
+done:
+  return success;
+}
+
+bool iota_gfx_on(void) {
+  bool success = false;
+
+  send_cmd1(DisplayOn);
+  success = true;
+
+done:
+  return success;
+}
+
+void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) {
+  *matrix->cursor = c;
+  ++matrix->cursor;
+
+  if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) {
+    // We went off the end; scroll the display upwards by one line
+    memmove(&matrix->display[0], &matrix->display[1],
+            MatrixCols * (MatrixRows - 1));
+    matrix->cursor = &matrix->display[MatrixRows - 1][0];
+    memset(matrix->cursor, ' ', MatrixCols);
+  }
+}
+
+void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) {
+  matrix->dirty = true;
+
+  if (c == '\n') {
+    // Clear to end of line from the cursor and then move to the
+    // start of the next line
+    uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols;
+
+    while (cursor_col++ < MatrixCols) {
+      matrix_write_char_inner(matrix, ' ');
+    }
+    return;
+  }
+
+  matrix_write_char_inner(matrix, c);
+}
+
+void iota_gfx_write_char(uint8_t c) {
+  matrix_write_char(&display, c);
+}
+
+void matrix_write(struct CharacterMatrix *matrix, const char *data) {
+  const char *end = data + strlen(data);
+  while (data < end) {
+    matrix_write_char(matrix, *data);
+    ++data;
+  }
+}
+
+void matrix_write_ln(struct CharacterMatrix *matrix, const char *data) {
+  char data_ln[strlen(data)+2];
+  snprintf(data_ln, sizeof(data_ln), "%s\n", data);
+  matrix_write(matrix, data_ln);
+}
+
+void iota_gfx_write(const char *data) {
+  matrix_write(&display, data);
+}
+
+void matrix_write_P(struct CharacterMatrix *matrix, const char *data) {
+  while (true) {
+    uint8_t c = pgm_read_byte(data);
+    if (c == 0) {
+      return;
+    }
+    matrix_write_char(matrix, c);
+    ++data;
+  }
+}
+
+void iota_gfx_write_P(const char *data) {
+  matrix_write_P(&display, data);
+}
+
+void matrix_clear(struct CharacterMatrix *matrix) {
+  memset(matrix->display, ' ', sizeof(matrix->display));
+  matrix->cursor = &matrix->display[0][0];
+  matrix->dirty = true;
+}
+
+void iota_gfx_clear_screen(void) {
+  matrix_clear(&display);
+}
+
+void matrix_render(struct CharacterMatrix *matrix) {
+  last_flush = timer_read();
+  iota_gfx_on();
+#if DEBUG_TO_SCREEN
+  ++displaying;
+#endif
+
+  // Move to the home position
+  send_cmd3(PageAddr, 0, MatrixRows - 1);
+  send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1);
+
+  if (i2c_start_write(SSD1306_ADDRESS)) {
+    goto done;
+  }
+  if (i2c_master_write(0x40)) {
+    // Data mode
+    goto done;
+  }
+
+  for (uint8_t row = 0; row < MatrixRows; ++row) {
+    for (uint8_t col = 0; col < MatrixCols; ++col) {
+      const uint8_t *glyph = font + (matrix->display[row][col] * FontWidth);
+
+      for (uint8_t glyphCol = 0; glyphCol < FontWidth; ++glyphCol) {
+        uint8_t colBits = pgm_read_byte(glyph + glyphCol);
+        i2c_master_write(colBits);
+      }
+
+      // 1 column of space between chars (it's not included in the glyph)
+      //i2c_master_write(0);
+    }
+  }
+
+  matrix->dirty = false;
+
+done:
+  i2c_master_stop();
+#if DEBUG_TO_SCREEN
+  --displaying;
+#endif
+}
+
+void iota_gfx_flush(void) {
+  matrix_render(&display);
+}
+
+__attribute__ ((weak))
+void iota_gfx_task_user(void) {
+}
+
+void iota_gfx_task(void) {
+  iota_gfx_task_user();
+
+  if (display.dirty|| force_dirty) {
+    iota_gfx_flush();
+    force_dirty = false;
+  }
+
+  if (timer_elapsed(last_flush) > ScreenOffInterval) {
+    iota_gfx_off();
+  }
+}
+
+bool process_record_gfx(uint16_t keycode, keyrecord_t *record) {
+  force_dirty = true;
+  return true;
+}
+
+#endif

keyboards/comet46/ssd1306.h

@@ -0,0 +1,91 @@
+#pragma once
+
+#include <stdbool.h>
+#include <stdio.h>
+#include "pincontrol.h"
+#include "action.h"
+
+enum ssd1306_cmds {
+  DisplayOff = 0xAE,
+  DisplayOn = 0xAF,
+
+  SetContrast = 0x81,
+  DisplayAllOnResume = 0xA4,
+
+  DisplayAllOn = 0xA5,
+  NormalDisplay = 0xA6,
+  InvertDisplay = 0xA7,
+  SetDisplayOffset = 0xD3,
+  SetComPins = 0xda,
+  SetVComDetect = 0xdb,
+  SetDisplayClockDiv = 0xD5,
+  SetPreCharge = 0xd9,
+  SetMultiPlex = 0xa8,
+  SetLowColumn = 0x00,
+  SetHighColumn = 0x10,
+  SetStartLine = 0x40,
+
+  SetMemoryMode = 0x20,
+  ColumnAddr = 0x21,
+  PageAddr = 0x22,
+
+  ComScanInc = 0xc0,
+  ComScanDec = 0xc8,
+  SegRemap = 0xa0,
+  SetChargePump = 0x8d,
+  ExternalVcc = 0x01,
+  SwitchCapVcc = 0x02,
+
+  ActivateScroll = 0x2f,
+  DeActivateScroll = 0x2e,
+  SetVerticalScrollArea = 0xa3,
+  RightHorizontalScroll = 0x26,
+  LeftHorizontalScroll = 0x27,
+  VerticalAndRightHorizontalScroll = 0x29,
+  VerticalAndLeftHorizontalScroll = 0x2a,
+};
+
+// Controls the SSD1306 128x32 OLED display via i2c
+
+#ifndef SSD1306_ADDRESS
+#define SSD1306_ADDRESS 0x3C
+#endif
+
+#define DisplayHeight 32
+#define DisplayWidth 128
+
+#define FontHeight 8
+#define FontWidth 6
+
+#define MatrixRows (DisplayHeight / FontHeight)
+#define MatrixCols (DisplayWidth / FontWidth)
+
+struct CharacterMatrix {
+  uint8_t display[MatrixRows][MatrixCols];
+  uint8_t *cursor;
+  bool dirty;
+};
+
+struct CharacterMatrix display;
+
+bool iota_gfx_init(bool rotate);
+void iota_gfx_task(void);
+bool iota_gfx_off(void);
+bool iota_gfx_on(void);
+void iota_gfx_flush(void);
+void iota_gfx_write_char(uint8_t c);
+void iota_gfx_write(const char *data);
+void iota_gfx_write_P(const char *data);
+void iota_gfx_clear_screen(void);
+
+void iota_gfx_task_user(void);
+
+void matrix_clear(struct CharacterMatrix *matrix);
+void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c);
+void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c);
+void matrix_write(struct CharacterMatrix *matrix, const char *data);
+void matrix_write_ln(struct CharacterMatrix *matrix, const char *data);
+void matrix_write_P(struct CharacterMatrix *matrix, const char *data);
+void matrix_render(struct CharacterMatrix *matrix);
+
+bool process_record_gfx(uint16_t keycode, keyrecord_t *record);

keyboards/cyclops/keymaps/default/keymap.c

@@ -1,65 +0,0 @@
-/* Copyright 2018 'mechmerlin'
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-// Defines the keycodes used by our macros in process_record_user
-enum custom_keycodes {
-  QMKBEST = SAFE_RANGE,
-  QMKURL
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-	[0] = LAYOUT(
-		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_PGUP,
-		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_PGDN,
-		KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_RGHT,
-		KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(1), KC_0, KC_UP,
-		KC_CAPS, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_ENT, KC_DOWN),
-};
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case QMKBEST:
-      if (record->event.pressed) {
-        // when keycode QMKBEST is pressed
-        SEND_STRING("QMK is the best thing ever!");
-      } else {
-        // when keycode QMKBEST is released
-      }
-      break;
-    case QMKURL:
-      if (record->event.pressed) {
-        // when keycode QMKURL is pressed
-        SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER));
-      } else {
-        // when keycode QMKURL is released
-      }
-      break;
-  }
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/dz60/dz60.c

@@ -23,11 +23,9 @@ void led_init_ports(void) {
 
 void led_set_kb(uint8_t usb_led) {
     if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-        DDRB |= (1 << 2);
         PORTB &= ~(1 << 2);
     } else {
-        DDRB &= ~(1 << 2);
-        PORTB &= ~(1 << 2);
+        PORTB |= (1 << 2);
     }
 
     led_set_user(usb_led);

keyboards/mxss/rgblight.c

@@ -234,7 +234,7 @@ void rgblight_step_reverse(void) {
   rgblight_mode(mode);
 }
 
-uint32_t rgblight_get_mode(void) {
+uint8_t rgblight_get_mode(void) {
   if (!rgblight_config.enable) {
     return false;
   }

keyboards/namecard2x4/keymaps/brainfuck/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2018 takashiski
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/namecard2x4/keymaps/brainfuck/keymap.c

@@ -0,0 +1,59 @@
+/* Copyright 2018 takashiski
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+#include "keymap_jp.h"
+
+enum Layer
+{
+	JP,
+	EN,
+	CONFIG
+};
+
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[JP] = LAYOUT(
+		JP_LT,JP_GT,JP_PLUS,JP_MINS,\
+		LT(CONFIG,JP_DOT),JP_COMM,JP_LBRC,LT(CONFIG,JP_RBRC)\
+		),
+[EN] = LAYOUT(
+		KC_LT,KC_GT,KC_PLUS,KC_MINS,\
+		LT(CONFIG,KC_DOT),KC_COMM,KC_LBRC,LT(CONFIG,KC_RBRC)\
+		),
+[CONFIG]= LAYOUT(
+		KC_NO,DF(JP),DF(JP),KC_NO,\
+		KC_TRNS,DF(EN),DF(JP),KC_TRNS\
+		)
+
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/namecard2x4/keymaps/brainfuck/readme.md

@@ -0,0 +1,12 @@
+# keymap for brainfuck
+
+ This keymap is specialized for the brainfuck programming language.
+
+| < | > | + | - |
+| . | , | [ | ] |
+
+and when you hold . or ], change config layer.
+
+default layer is for JP keyboard(logical pairing).
+you can choose EN keyboard(typewrite pairing).
+

keyboards/planck/keymaps/mattly/keymap.c

@@ -24,7 +24,6 @@ enum planck_layers {
   _NUMBER,
   _SYMBOL,
   _FUNC,
-  _ADJUST
 };
 
 enum planck_keycodes {
@@ -33,11 +32,10 @@ enum planck_keycodes {
 
 #define SPC_SHF MT(MOD_LSFT, KC_SPC)
 
-#define ENT_FUN LT(_FUNC, KC_ENT)
-#define ESC_FUN LT(_FUNC, KC_ESC)
+#define ESC_HYP MT(MOD_HYPR, KC_ESC)
 #define TAB_NUM LT(_NUMBER, KC_TAB)
 #define BSP_SYM LT(_SYMBOL, KC_BSPC)
-#define DEL_ADJ LT(_ADJUST, KC_DEL)
+#define DEL_WRP MT(MOD_LCTL | MOD_LALT | MOD_LGUI, KC_DEL)
 
 #define SYMLOCK TG(_SYMBOL)
 #define NUMLOCK TG(_NUMBER)
@@ -48,18 +46,25 @@ enum planck_keycodes {
 #define ONE_HYP OSM(MOD_HYPR)
 #define ONE_MEH OSM(MOD_MEH)
 #define ONE_WRP OSM(MOD_LCTL | MOD_LALT | MOD_LGUI)
+#define ONE_WOA OSM(MOD_LCTL | MOD_LGUI | MOD_LSFT)
+#define ONE_DER OSM(MOD_LALT | MOD_LGUI | MOD_LSFT)
 
-#define A_CTRL MT(MOD_LCTL, KC_A)
-#define S_ALT  MT(MOD_LALT, KC_S)
-#define D_GUI  MT(MOD_LGUI, KC_D)
-#define F_SHFT MT(MOD_LSFT, KC_F)
-#define G_NUM  LT(_NUMBER, KC_G)
-#define H_NAV  LT(_SYMBOL, KC_H)
-#define J_SHFT MT(MOD_RSFT, KC_J)
-#define K_GUI  MT(MOD_RGUI, KC_K)
-#define L_ALT  MT(MOD_RALT, KC_L)
+#define A_CTRL  MT(MOD_LCTL, KC_A)
+#define S_ALT   MT(MOD_LALT, KC_S)
+#define D_GUI   MT(MOD_LGUI, KC_D)
+#define F_SHFT  MT(MOD_LSFT, KC_F)
+#define J_SHFT  MT(MOD_RSFT, KC_J)
+#define K_GUI   MT(MOD_RGUI, KC_K)
+#define L_ALT   MT(MOD_RALT, KC_L)
 #define MINSCTL MT(MOD_RCTL, KC_MINS)
-#define SCL_CTL MT(MOD_RCTL, KC_SCLN)
+
+#define ENT_CTL MT(MOD_LCTL, KC_ENT)
+#define LT_ALT  MT(MOD_LALT, KC_LEFT)
+#define DN_GUI  MT(MOD_LGUI, KC_DOWN)
+#define RT_SHFT MT(MOD_LSFT, KC_RGHT)
+#define N4_SHFT MT(MOD_RSFT, KC_4)
+#define N5_GUI  MT(MOD_RGUI, KC_5)
+#define N6_ALT  MT(MOD_RALT, KC_6)
 
 #define BWORD LALT(KC_LEFT)
 #define FWORD LALT(KC_RIGHT)
@@ -68,6 +73,8 @@ enum planck_keycodes {
 #define PWIN LGUI(LSFT(KC_GRV))
 #define NTAB LGUI(LSFT(KC_RBRC))
 #define PTAB LGUI(LSFT(KC_LBRC))
+#define NAVBACK LGUI(KC_LBRC)
+#define NAVFWD  LGUI(KC_RBRC)
 
 #define XMSNCTL HYPR(KC_F14)
 #define XDSKTOP HYPR(KC_F15)
@@ -82,7 +89,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   |      |      |      |      |      |      |      |      |      |      |      |      |
   |------|------|------|------|------|------|------|------|------|------|------|------|
   |   (  |   a  |   s  |   d  |   f  |   g  |   h  |   j  |   k  |   l  |   ;  |   '  |
-  |      | CTRL | ALT  |  GUI | SHIFT| NUMBR| SYMBL| SHIFT| GUI  | ALT  | CTRL |      |
+  |      | CTRL | ALT  |  GUI | SHIFT|      |      | SHIFT| GUI  | ALT  | CTRL |      |
   |------|------|------|------|------|------|------|------|------|------|------|------|
   |   [  |   z  |   x  |   c  |   v  |   b  |   n  |   m  |   ,  |   .  |   /  |   >  |
   |      |      |      |      |      |      |      |      |      |      |      |      |
@@ -92,71 +99,54 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  */
  [_QWERTY] = LAYOUT_planck_grid(
     KC_HASH, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_SCLN,
-    KC_LPRN, A_CTRL,  S_ALT,   D_GUI,   F_SHFT,  G_NUM,   H_NAV,   J_SHFT,  K_GUI,   L_ALT,   MINSCTL, KC_QUOT,
+    KC_LPRN, A_CTRL,  S_ALT,   D_GUI,   F_SHFT,  KC_G,    KC_H,    J_SHFT,  K_GUI,   L_ALT,   MINSCTL, KC_QUOT,
     KC_LBRC, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RABK,
-    KC_CAPS, ONE_ALT, ONE_GUI, ESC_FUN, TAB_NUM, SPC_SHF, SPC_SHF, BSP_SYM, DEL_ADJ, ONE_HYP, ONE_MEH, ONE_WRP
+    NUMLOCK, MO(_FUNC), ONE_MEH, ESC_HYP, TAB_NUM, SPC_SHF, SPC_SHF, BSP_SYM, DEL_WRP, ONE_WRP, ONE_DER, SYMLOCK
  ),
 
 /* Symbol
-  |      |   &  |   `  |   ~  |   [  |   ]  |   <  |   >  |   +  |   |  |      |   -  |
-  |      |   $  |   %  |   =  |   (  |   )  |      |   :  |   !  |   @  |   *  |   '  |
-  |      |      |   ^  |   #  |   {  |   }  |      |   "  |   |  |   \  |      |      |
-  |      |      |      |      | LOCK |             | .... |      |      |      |      |
+  |      |   &  |   `  |   ~  |   [  |   ]  |   <  |   >  |   +  |   |  |      |      |
+  |      |   $  |   %  |   =  |   (  |   )  |   ;  |   :  |   !  |   @  |   _  |      |
+  |      |      |   ^  |   #  |   {  |   }  |   '  |   "  |   |  |   \  |   ?  |      |
+  |      |      |      |      |      |             | .... |      |      |      |      |
  */
  [_SYMBOL] = LAYOUT_planck_grid(
-     _______, KC_AMPR, KC_GRV,  KC_TILD, KC_LBRC, KC_RBRC, KC_LABK, KC_RABK, KC_PLUS, KC_ASTR, XXXXXXX, _______,
-     _______, KC_DLR,  KC_PERC, KC_EQL,  KC_LPRN, KC_RPRN, KC_SCLN, KC_COLN, KC_EXLM, KC_AT,   KC_ASTR, _______,
-     _______, XXXXXXX, KC_CIRC, KC_HASH, KC_LCBR, KC_RCBR, KC_QUOT, KC_DQUO, KC_PIPE, KC_BSLS, XXXXXXX, _______,
-     _______, _______, _______, _______, SYMLOCK, _______, _______, _______, _______, _______, _______, _______
+     KC_ESC,  KC_AMPR, KC_GRV,  KC_TILD, KC_LBRC, KC_RBRC, KC_LABK, KC_RABK, KC_PLUS, KC_ASTR, XXXXXXX, KC_DEL,
+     KC_ENT,  KC_DLR,  KC_PERC, KC_EQL,  KC_LPRN, KC_RPRN, KC_SCLN, KC_COLN, KC_EXLM, KC_AT,   KC_UNDS, KC_BSPC,
+     _______, XXXXXXX, KC_CIRC, KC_HASH, KC_LCBR, KC_RCBR, KC_QUOT, KC_DQUO, KC_PIPE, KC_BSLS, KC_QUES, _______,
+     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
  ),
 /* Number
   |      |      |<-word|  up  |word->| PgUp |   .  |   7  |   8  |   9  |   +  |   *  |
   |      | Enter| left | down | right| PgDn |   0  |   4  |   5  |   6  |   -  |   /  |
   |      | Bksp | Home |  tab | End  | Del  |   ,  |   1  |   2  |   3  |   =  |   %  |
-  |      |      |      |      | .... |             | LOCK |      |   :  |   $  |      |
+  |      |      |      |      | .... |             |      |      |   :  |   $  |      |
  */
 [_NUMBER] = LAYOUT_planck_grid(
-    XXXXXXX, _______, BWORD,   KC_UP,   FWORD,   KC_PGUP, KC_DOT,  KC_7,    KC_8,    KC_9,    KC_PLUS, KC_ASTR,
-    XXXXXXX, KC_ENT , KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_0,    KC_4,    KC_5,    KC_6,    KC_MINS, KC_SLSH,
+    XXXXXXX, XXXXXXX, BWORD,   KC_UP,   FWORD,   KC_PGUP, KC_DOT,  KC_7,    KC_8,    KC_9,    KC_PLUS, KC_ASTR,
+    KC_CAPS, ENT_CTL, LT_ALT,  DN_GUI,  RT_SHFT, KC_PGDN, KC_0,    N4_SHFT, N5_GUI,  N6_ALT,  MINSCTL, KC_SLSH,
     XXXXXXX, KC_BSPC, KC_HOME, KC_TAB,  KC_END,  KC_DEL,  KC_COMM, KC_1,    KC_2,    KC_3,    KC_EQL,  KC_PERC,
-    _______, _______, _______, _______, _______, _______, _______, NUMLOCK, _______, KC_COLN, KC_DLR,  _______
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_COLN, KC_DLR,  _______
 ),
 /* Function
- * |      | Mctl | Pspc | Nwin | Nspc | Desk |      |  F7  |  F8  |  F9  | F10  | F13  |
- * |      | Nctr | Ptab | Pwin | Ntab |      |      |  F4  |  F5  |  F6  | F11  | F14  |
+ * | Reset| Mctl | Pspc | Nwin | Nspc | Desk |      |  F7  |  F8  |  F9  | F10  | F13  |
+ * | Debug| Nctr | Ptab | Pwin | Ntab | Back | Fwd  |  F4  |  F5  |  F6  | F11  | F14  |
  * | Mute | Vol- | Vol+ | Trk- | Trk+ | Play |      |  F1  |  F2  |  F3  | F12  | F15  |
  * |      |      |      |      |      |      |      |      |      |      |      |      |
  */
 [_FUNC] = LAYOUT_planck_grid(
-    XXXXXXX, XMSNCTL, XPRVSPC, NWIN,    XNXTSPC, XDSKTOP, XXXXXXX, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F13,
-    XXXXXXX, XNOTIFY, PTAB,    PWIN,    NTAB,    XXXXXXX, XXXXXXX, KC_F4,   KC_F5,   KC_F6,   KC_F11,  KC_F14,
+    RESET,   XMSNCTL, XPRVSPC, NWIN,    XNXTSPC, XDSKTOP, XXXXXXX, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F13,
+    DEBUG,   XNOTIFY, PTAB,    PWIN,    NTAB,    NAVBACK, NAVFWD,  KC_F4,   KC_F5,   KC_F6,   KC_F11,  KC_F14,
     KC_MUTE, KC_VOLD, KC_VOLU, KC_MRWD, KC_MFFD, KC_MPLY, XXXXXXX, KC_F1,   KC_F2,   KC_F3,   KC_F12,  KC_F15,
     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
-),
-
-/* Adjust (Lower + Raise)
- * ,-----------------------------------------------------------------------------------.
- * | Reset| Debug|      |      |      |      |      |      |      |      |      |      |
- * |      |      |      |      |      |      |      |      |      |      |      |      |
- * |      |      |      |      |      |      |      |      |      |      |      |      |
- * |      |      |      |      |      |      |      |      |      |      |      |      |
- * `-----------------------------------------------------------------------------------'
- */
-[_ADJUST] = LAYOUT_planck_grid(
-    RESET,   DEBUG,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
-    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
-    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
-    _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______
 )
-
-
 };
 
 #ifdef AUDIO_ENABLE
 #endif
 
 uint32_t layer_state_set_user(uint32_t state) {
-  /* state = update_tri_layer_state(state, _SYMBOL, _NUMBER, _ADJUST); */
+  state = update_tri_layer_state(state, _SYMBOL, _NUMBER, _FUNC);
   return state;
 }
 

keyboards/westfoxtrot/cyclops/config.h

@@ -1,5 +1,5 @@
 /*
-Copyright 2018 'mechmerlin'
+Copyright 2018 westfoxtrot
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -20,12 +20,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x0000
+#define VENDOR_ID       0x21FF
+#define PRODUCT_ID      0x0A66
 #define DEVICE_VER      0x0001
-#define MANUFACTURER    You
+#define MANUFACTURER    westfoxtrot
 #define PRODUCT         cyclops
-#define DESCRIPTION     A custom 66% keyboard
+#define DESCRIPTION     AEK66
 
 /* key matrix size */
 #define MATRIX_ROWS 5
@@ -187,9 +187,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /*
 #define LCD_LINES           2     //< number of visible lines of the display
 #define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
-
 #define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
-
 #if LCD_IO_MODE
 #define LCD_PORT         PORTB        //< port for the LCD lines
 #define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
@@ -211,4 +209,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/westfoxtrot/cyclops/cyclops.c

@@ -1,4 +1,4 @@
-/* Copyright 2018 'mechmerlin'
+/* Copyright 2018 westfoxtrot
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -40,4 +40,4 @@ void led_set_kb(uint8_t usb_led) {
 	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
 
 	led_set_user(usb_led);
-}
+}

keyboards/westfoxtrot/cyclops/cyclops.h

@@ -1,4 +1,4 @@
-/* Copyright 2018 'mechmerlin'
+/* Copyright 2018 westfoxtrot
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by

keyboards/westfoxtrot/cyclops/info.json

@@ -9,4 +9,4 @@
           "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Page Up", "x":15.5, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Page Down", "x":15.5, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Shift", "x":0, "y":3, "w":1.5}, {"label":"|", "x":1.5, "y":3}, {"label":"Z", "x":2.5, "y":3}, {"label":"X", "x":3.5, "y":3}, {"label":"C", "x":4.5, "y":3}, {"label":"V", "x":5.5, "y":3}, {"label":"B", "x":6.5, "y":3}, {"label":"N", "x":7.5, "y":3}, {"label":"M", "x":8.5, "y":3}, {"label":"<", "x":9.5, "y":3}, {"label":">", "x":10.5, "y":3}, {"label":"?", "x":11.5, "y":3}, {"x":12.5, "y":3}, {"label":"Shift", "x":13.5, "y":3}, {"label":"\u2191", "x":14.5, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4, "w":1.25}, {"label":"Alt", "x":2.75, "y":4, "w":1.5}, {"x":4.25, "y":4, "w":6.5}, {"label":"Alt", "x":10.75, "y":4, "w":1.5}, {"label":"Ctrl", "x":12.25, "y":4, "w":1.25}, {"label":"\u2190", "x":13.5, "y":4}, {"label":"\u2193", "x":14.5, "y":4}, {"label":"\u2192", "x":15.5, "y":4}]
       }
   }
-}
+}

keyboards/westfoxtrot/cyclops/keymaps/default/keymap.c

@@ -0,0 +1,53 @@
+/* Copyright 2018 westfoxtrot
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+ 
+#include QMK_KEYBOARD_H
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	// Default layer
+	[0] = LAYOUT(
+		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL, KC_BSPC, KC_PGUP,
+		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,         KC_PGDN,
+		KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,
+		KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_NO, KC_RSFT, KC_UP,
+		KC_CAPS, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, MO(1),          KC_LEFT, KC_DOWN, KC_RGHT),
+
+	// Fn1 Layer
+	[1] = LAYOUT(
+		KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F11,  KC_DEL,  KC_HOME,
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          KC_END,
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_ENT,
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+		RESET,   _______, _______,                            _______,                            _______, _______,          _______, _______, _______),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/westfoxtrot/cyclops/readme.md

@@ -1,13 +1,15 @@
-# Cyclops
+# cyclops
 
-66% Alps Keyboard in ISO layout. 
+![cyclops](https://github.com/westfoxtrot/Cyclops)
 
-Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)  
-Hardware Supported: 66% Alps Keyboard  
-Hardware Availability: A very limited number were made. 
+66% Alps Keyboard in ISO layout.
+
+ Keyboard Maintainer: [westfoxtrot](https://github.com/westfoxtrot)  
+ Hardware Supported: Cyclops (AEKISO66) PCB  
+ Hardware Availability: Files released here (https://github.com/westfoxtrot/Cyclops)  
 
 Make example for this keyboard (after setting up your build environment):
 
-    make cyclops:default
+    make westfoxtrot/cyclops:default
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/westfoxtrot/cyclops/rules.mk

@@ -62,14 +62,14 @@ BOOTLOADER = atmel-dfu
 #   change yes to no to disable
 #
 BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no            # USB Nkey Rollover
+NKRO_ENABLE = yes            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
@@ -77,4 +77,4 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)

keyboards/whitefox/board_is31fl3731c.h

@@ -31,7 +31,7 @@ static const uint8_t led_mask[] = {
 	0xFF, 0x00, /* C6-1 -> C6-16 */
 	0xFF, 0x00, /* C7-1 -> C7-16 */
 	0xFF, 0x00, /* C8-1 -> C8-16 */
-	0xFE, 0x00, /* C9-1 -> C9-16 */
+	0xFF, 0x00, /* C9-1 -> C9-16 */
 };
 
 // The address of the LED

keyboards/zeal60/keymaps/crd/config.h

@@ -0,0 +1,29 @@
+#pragma once
+
+/* enable/disable LEDs based on layout */
+#undef RGB_BACKLIGHT_USE_SPLIT_BACKSPACE
+#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
+
+#undef RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT
+#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
+
+#undef RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT
+#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 1
+
+#undef RGB_BACKLIGHT_USE_7U_SPACEBAR
+#define RGB_BACKLIGHT_USE_7U_SPACEBAR 1
+
+#undef RGB_BACKLIGHT_USE_ISO_ENTER
+#define RGB_BACKLIGHT_USE_ISO_ENTER 0
+
+#undef RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS
+#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
+
+#undef RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED
+#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 1
+
+#undef RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT
+#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 3
+
+#undef RGB_BACKLIGHT_EFFECT
+#define RGB_BACKLIGHT_EFFECT 0

keyboards/zeal60/keymaps/crd/keymap.c

@@ -0,0 +1,39 @@
+// tsangan layout for Zeal60
+#include QMK_KEYBOARD_H
+
+enum keyboard_layers {
+  _BL = 0, // Base Layer
+  _FL,     // Function Layer
+  _CL      // Control Layer
+};
+
+// Custom #defined keycodes (shorter macros for readability)
+#define KC_CTES CTL_T(KC_ESC)
+#define KC_RSUP RSFT_T(KC_UP)
+#define KC_RGLT RCMD_T(KC_LEFT)
+#define KC_RADN LT(_CL, KC_DOWN)
+#define KC_RCRT RCTL_T(KC_RIGHT)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	[_BL] = LAYOUT_60_ansi_split_bs_rshift(
+		KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,  XXXXXXX,
+		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+		KC_CTES, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+		KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSUP, MO(_FL),
+		KC_LCTL, KC_LALT, KC_LGUI,                            KC_SPC,                             XXXXXXX, KC_RGLT, KC_RADN, KC_RCRT
+	),
+	[_FL] = LAYOUT_60_ansi_split_bs_rshift(
+		KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  _______,
+		_______, KC_HOME, KC_UP,   KC_END,  _______, _______, _______, _______, KC_MUTE, _______, _______, KC_PGDN, KC_PGUP, _______,
+		_______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, KC_SLCK, KC_VOLD, KC_VOLU, KC_PAUS, _______, _______, _______,
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+		_______, _______, _______,                            _______,                            _______, _______, _______, _______
+	),
+	[_CL] = LAYOUT_60_ansi_split_bs_rshift(
+		_______, EF_DEC,  EF_INC,  H1_DEC,  H1_INC,  H2_DEC,  H2_INC,  _______, _______, _______, _______, BR_DEC,  BR_INC,  _______,  _______,
+		_______, _______, _______, S1_DEC,  S1_INC,  S2_DEC,  S2_INC,  _______, _______, _______, _______, ES_DEC,  ES_INC,  RESET,
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+		_______, _______, _______,                            _______,                            _______, _______, _______, _______
+	),
+};

keyboards/zinc/keymaps/ginjake/config.h

@@ -0,0 +1,38 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2018 monksoffunk
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+// if you need more program area, try uncomment follow line
+#include "serial_config_simpleapi.h"
+
+// place overrides here
+// Selection of RGBLIGHT MODE to use.
+#if defined(LED_ANIMATIONS)
+   #define RGBLIGHT_EFFECT_BREATHING
+   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+   #define RGBLIGHT_EFFECT_SNAKE
+   #define RGBLIGHT_EFFECT_KNIGHT
+   #define RGBLIGHT_EFFECT_CHRISTMAS
+   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+   //#define RGBLIGHT_EFFECT_RGB_TEST
+   //#define RGBLIGHT_EFFECT_ALTERNATING
+#endif

keyboards/zinc/keymaps/ginjake/keymap.c

@@ -0,0 +1,368 @@
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+rgblight_config_t RGB_current_config;
+#endif
+
+extern uint8_t is_master;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum layer_number {
+    _QWERTY = 0,
+    _COLEMAK,
+    _DVORAK,
+    _LOWER,
+    _RAISE,
+    _ADJUST
+};
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  LOWER,
+  RAISE,
+  ADJUST,
+  BACKLIT,
+  KANA,
+  EISU,
+  RGBRST,
+  AQOURS, //サンシャインぴっかぴかモード
+};
+
+#ifdef RGBLIGHT_ENABLE
+  //9色に変化するLEDのHSV各パラメータ
+  int aqours_h[] = { 26, 340, 150,   0, 199, 220,  53, 265, 322};
+  int aqours_s[] = {255, 165, 255, 255, 255, 350, 255, 255, 255};
+  int aqours_v[] = {255, 255, 255, 255, 255, 255, 255, 255, 255};
+  const int NEXT_COLOR_TIME = 2400; //次の色に切り替わるまでの時間
+  const int NEXT_CHANGE_TARGET_TIME = 100; //次のキーに色が伝播するまでの時間
+  bool aqours_mode = false;
+  int aqours_next_color_timer_count = 0;
+  int aqours_num  = 0;
+  int target_col = 0;
+
+  //keyのmatrixの位置とLEDの番号を紐づける
+  int combined_key_to_led[] =
+  {
+    0,1,2,3,4,5,
+    11,10,9,8,7,6,
+    12,13,14,15,16,17,
+    23,22,21,20,19,18
+  };
+#endif
+
+enum macro_keycodes {
+  KC_SAMPLEMACRO,
+};
+
+//Macros
+#define M_SAMPLE M(KC_SAMPLEMACRO)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { \
+  /* Qwerty
+   * ,-----------------------------------------.             ,-----------------------------------------.
+   * | Tab  |   Q  |   W  |   E  |   R  |   T  |             |   Y  |   U  |   I  |   O  |   P  | Bksp |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Ctrl |   A  |   S  |   D  |   F  |   G  |             |   H  |   J  |   K  |   L  |   ;  |  '   |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Shift|   Z  |   X  |   C  |   V  |   B  |             |   N  |   M  |   ,  |   .  |   /  |Enter |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Esc  |ADJUST| Win  | Alt  |LOWER |Space |             | Space| RAISE| Left | Down |  Up  | Right|
+   * `-----------------------------------------'             `-----------------------------------------'
+   */
+[_QWERTY] = LAYOUT_ortho_4x12(
+      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                      KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
+      KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                      KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+      KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,                      KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
+      KC_ESC,  ADJUST,  KC_LGUI, KC_LALT, LOWER,   KC_SPC,                    KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+      ),
+
+  /* Colemak
+   * ,-----------------------------------------.             ,-----------------------------------------.
+   * | Tab  |   Q  |   W  |   F  |   P  |   G  |             |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Ctrl |   A  |   R  |   S  |   T  |   D  |             |   H  |   N  |   E  |   I  |   O  |  '   |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Shift|   Z  |   X  |   C  |   V  |   B  |             |   K  |   M  |   ,  |   .  |   /  |Enter |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Esc  |ADJUST| Alt  | Win  |LOWER |Space |             | Space| RAISE| Left | Down |  Up  | Right|
+   * `-----------------------------------------'             `-----------------------------------------'
+   */
+  [_COLEMAK] = LAYOUT_ortho_4x12( \
+      KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,                      KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC, \
+      KC_LCTL, KC_A,    KC_R,    KC_S,    KC_T,    KC_D,                      KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT, \
+      KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,                      KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
+      KC_ESC,  ADJUST,  KC_LALT, KC_LGUI, LOWER,   KC_SPC,                    KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+      ),
+
+  /* Dvorak
+   * ,-----------------------------------------.             ,-----------------------------------------.
+   * | Tab  |   '  |   ,  |   .  |   P  |   Y  |             |   F  |   G  |   C  |   R  |   L  | Del  |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Ctrl |   A  |   O  |   E  |   U  |   I  |             |   D  |   H  |   T  |   N  |   S  |  /   |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Shift|   ;  |   Q  |   J  |   K  |   X  |             |   B  |   M  |   W  |   V  |   Z  |Enter |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * | Esc  |ADJUST| Alt  | Win  |LOWER |Space |             | Space| RAISE| Left | Down |  Up  | Right|
+   * `-----------------------------------------'             `-----------------------------------------'
+   */
+  [_DVORAK] = LAYOUT_ortho_4x12( \
+      KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,                      KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_DEL, \
+      KC_LCTL, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,                      KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH, \
+      KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,                      KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT , \
+      KC_ESC,  ADJUST,  KC_LALT, KC_LGUI, LOWER,   KC_SPC,                    KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+      ),
+
+  /* Lower
+   * ,-----------------------------------------.             ,-----------------------------------------.
+   * |   ~  |   !  |   @  |   #  |   $  |   %  |             |   ^  |   &  |   *  |   (  |   )  |      |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |      |      |      |      |      |      |             |   -  |   _  |   +  |   {  |   }  |  |   |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |      |      |      |      |      |      |             |      |      |      | Home | End  |      |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |      |      |      |      |      |      |             |      |      | Next | Vol- | Vol+ | Play |
+   * `-----------------------------------------'             `-----------------------------------------'
+   */
+  [_LOWER] = LAYOUT_ortho_4x12( \
+      KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                   KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \
+      _______, _______, _______, _______, _______, _______,                   KC_MINS, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
+      _______, _______, _______, _______, _______, _______,                   _______, _______, _______, KC_HOME, KC_END,  _______, \
+      _______, _______, _______, _______, _______, _______,                   _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+      ),
+
+  /* Raise
+   * ,-----------------------------------------.             ,-----------------------------------------.
+   * |   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Del  |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |      |  F1  |  F2  |  F3  |  F4  |  F5  |             |  F6  |   -  |   =  |   [  |   ]  |  \   |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |      |  F7  |  F8  |  F9  |  F10 |  F11 |             |  F12 |      |      |      |      |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |      |      |      |      |      |      |             |      |      | Next | Vol- | Vol+ | Play |
+   * `-----------------------------------------'             `-----------------------------------------'
+   */
+  [_RAISE] = LAYOUT_ortho_4x12( \
+      KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL, \
+      _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                     KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
+      _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,                    KC_F12,  _______, _______, _______, _______, _______, \
+      _______, _______, _______, _______, _______, _______,                   _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+      ),
+
+  /* Adjust (Lower + Raise)
+   * ,-----------------------------------------.             ,-----------------------------------------.
+   * |      | Reset|RGBRST|Aud on|Audoff|      |             |      |Qwerty|Colemk|Dvorak|      | Ins  |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |AQOURS|RGB ON| HUE+ | SAT+ | VAL+ | Mac  |             | Win  |  -   |   =  |Print |ScLock|Pause |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |      | MODE | HUE- | SAT- | VAL- |      |             |      |      |      |      |      |      |
+   * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+   * |      |      |      | EISU | EISU | EISU |             | KANA | KANA | Home |PageDn|PageUp| End  |
+   * `-----------------------------------------'             `-----------------------------------------'
+   */
+    [_ADJUST] =  LAYOUT_ortho_4x12( \
+      _______, RESET,   RGBRST,  _______, _______, _______,                   _______, QWERTY,  COLEMAK, DVORAK,  _______, KC_INS, \
+       AQOURS, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, AG_NORM,                   AG_SWAP, KC_MINS, KC_EQL,  KC_PSCR, KC_SLCK, KC_PAUS,\
+      _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______,                   _______, _______, _______, _______, _______, _______,\
+      _______, _______, _______, EISU,    EISU,    EISU,                      KANA,    KANA,    KC_HOME, KC_PGDN, KC_PGUP, KC_END\
+      )
+};
+
+// define variables for reactive RGB
+bool TOG_STATUS = false;
+
+// Setting ADJUST layer RGB back to default
+void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
+  if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
+    #ifdef RGBLIGHT_ENABLE
+      rgblight_mode_noeeprom(RGB_current_config.mode);
+    #endif
+    layer_on(layer3);
+  } else {
+    layer_off(layer3);
+  }
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_COLEMAK);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_DVORAK);
+      }
+      return false;
+      break;
+
+    case LOWER:
+      if (record->event.pressed) {
+          //not sure how to have keyboard check mode and set it to a variable, so my work around
+          //uses another variable that would be set to true after the first time a reactive key is pressed.
+        if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
+        } else {
+          TOG_STATUS = !TOG_STATUS;
+          #ifdef RGBLIGHT_ENABLE
+           rgblight_mode_noeeprom(16);
+          #endif
+        }
+        layer_on(_LOWER);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      } else {
+        #ifdef RGBLIGHT_ENABLE
+          rgblight_mode_noeeprom(RGB_current_config.mode);   // revert RGB to initial mode prior to RGB mode change
+        #endif
+        TOG_STATUS = false;
+        layer_off(_LOWER);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+
+    case RAISE:
+      if (record->event.pressed) {
+        //not sure how to have keyboard check mode and set it to a variable, so my work around
+        //uses another variable that would be set to true after the first time a reactive key is pressed.
+        if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
+        } else {
+          TOG_STATUS = !TOG_STATUS;
+          #ifdef RGBLIGHT_ENABLE
+            rgblight_mode_noeeprom(15);
+          #endif
+        }
+        layer_on(_RAISE);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      } else {
+        #ifdef RGBLIGHT_ENABLE
+          rgblight_mode_noeeprom(RGB_current_config.mode);  // revert RGB to initial mode prior to RGB mode change
+        #endif
+        layer_off(_RAISE);
+        TOG_STATUS = false;
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+
+    case ADJUST:
+        if (record->event.pressed) {
+          layer_on(_ADJUST);
+        } else {
+          layer_off(_ADJUST);
+        }
+        return false;
+        break;
+      //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released
+    case RGB_MOD:
+      #ifdef RGBLIGHT_ENABLE
+        if (record->event.pressed) {
+          rgblight_mode_noeeprom(RGB_current_config.mode);
+          rgblight_step();
+          RGB_current_config.mode = rgblight_config.mode;
+        }
+      #endif
+      return false;
+      break;
+
+    case EISU:
+      if (record->event.pressed) {
+        if(keymap_config.swap_lalt_lgui==false){
+          register_code(KC_LANG2);
+        }else{
+          SEND_STRING(SS_LALT("`"));
+        }
+      } else {
+        unregister_code(KC_LANG2);
+      }
+      return false;
+      break;
+    case KANA:
+      if (record->event.pressed) {
+        if(keymap_config.swap_lalt_lgui==false){
+          register_code(KC_LANG1);
+        }else{
+         SEND_STRING(SS_LALT("`"));
+        }
+      } else {
+        unregister_code(KC_LANG1);
+      }
+      return false;
+      break;
+    case AQOURS:
+      #ifdef RGBLIGHT_ENABLE
+        if (record->event.pressed) {
+          aqours_mode = !aqours_mode;
+        }
+      #endif
+      break;
+    case RGBRST:
+      #ifdef RGBLIGHT_ENABLE
+        if (record->event.pressed) {
+          eeconfig_update_rgblight_default();
+          rgblight_enable();
+          RGB_current_config = rgblight_config;
+        }
+      #endif
+      break;
+  }
+  return true;
+}
+
+#ifdef RGBLIGHT_ENABLE
+
+  void aqours_led(void) {
+    aqours_next_color_timer_count++;
+    //一定間隔で色が変化
+    if (aqours_next_color_timer_count > NEXT_COLOR_TIME) {
+      aqours_num++;
+      aqours_next_color_timer_count = 0;
+      target_col = 0;
+      if (aqours_num == sizeof(aqours_h) / sizeof(int)) {
+        aqours_num = 0;
+      }
+    }
+
+    //キー毎に時間差で色が変化していく
+    if (aqours_next_color_timer_count % NEXT_CHANGE_TARGET_TIME == 0) {
+      if (target_col < MATRIX_COLS) {
+        sethsv(aqours_h[aqours_num], aqours_s[aqours_num], aqours_v[aqours_num], (LED_TYPE *)&led[target_col]);
+        sethsv(aqours_h[aqours_num], aqours_s[aqours_num], aqours_v[aqours_num], (LED_TYPE *)&led[11 - target_col]);
+        sethsv(aqours_h[aqours_num], aqours_s[aqours_num], aqours_v[aqours_num], (LED_TYPE *)&led[12 + target_col]);
+        sethsv(aqours_h[aqours_num], aqours_s[aqours_num], aqours_v[aqours_num], (LED_TYPE *)&led[23 - target_col]);
+        target_col++;
+        rgblight_set();
+      }
+    }
+  }
+#endif
+
+void matrix_scan_user(void) {
+    #ifdef RGBLIGHT_ENABLE
+      if (aqours_mode) {
+        aqours_led();
+      }
+    #endif
+}
+
+void matrix_init_user(void) {
+    #ifdef RGBLIGHT_ENABLE
+      rgblight_init();
+      RGB_current_config = rgblight_config;
+    #endif
+}

keyboards/zinc/keymaps/ginjake/readme_jp.md

@@ -0,0 +1,123 @@
+# The Default Zinc Layout
+## 配列
+
+### Qwerty配列
+
+```
+ ,-----------------------------------------.             ,-----------------------------------------.
+ | Tab  |   Q  |   W  |   E  |   R  |   T  |             |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ |------+------+------+------+------+------|             |------+------+------+------+------+------|
+ | Ctrl |   A  |   S  |   D  |   F  |   G  |             |   H  |   J  |   K  |   L  |   ;  |  '   |
+ |------+------+------+------+------+------|             |------+------+------+------+------+------|
+ | Shift|   Z  |   X  |   C  |   V  |   B  |             |   N  |   M  |   ,  |   .  |   /  |Enter |
+ |------+------+------+------+------+------|             |------+------+------+------+------+------|
+ | Esc  |  Fn  | Alt  | Win  |Lower |Space |             | Space| Raise| Left | Down |  Up  | Right|
+ `------------------------------------------             ------------------------------------------'
+```
+
+### Colemak
+
+```
+ ,-----------------------------------------.             ,-----------------------------------------.
+ | Tab  |   Q  |   W  |   F  |   P  |   G  |             |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+ |------+------+------+------+------+------|             |------+------+------+------+------+------|
+ | Ctrl |   A  |   R  |   S  |   T  |   D  |             |   H  |   N  |   E  |   I  |   O  |  '   |
+ |------+------+------+------+------+------|             |------+------+------+------+------+------|
+ | Shift|   Z  |   X  |   C  |   V  |   B  |             |   K  |   M  |   ,  |   .  |   /  |Enter |
+ |------+------+------+------+------+------|             |------+------+------+------+------+------|
+ | Esc  |ADJUST| Alt  | Win  |LOWER |Space |             | Space| RAISE| Left | Down |  Up  | Right|
+ `------------------------------------------             ------------------------------------------'
+```   
+ 
+### Dvorak
+
+```
+ ,-----------------------------------------.             ,-----------------------------------------.
+ | Tab  |   '  |   ,  |   .  |   P  |   Y  |             |   F  |   G  |   C  |   R  |   L  | Del  |
+ |------+------+------+------+------+------|             |------+------+------+------+------+------|
+ | Ctrl |   A  |   O  |   E  |   U  |   I  |             |   D  |   H  |   T  |   N  |   S  |  /   |
+ |------+------+------+------+------+------|             |------+------+------+------+------+------|
+ | Shift|   ;  |   Q  |   J  |   K  |   X  |             |   B  |   M  |   W  |   V  |   Z  |Enter |
+ |------+------+------+------+------+------|             |------+------+------+------+------+------|
+ | Esc  |ADJUST| Alt  | Win  |LOWER |Space |             | Space| RAISE| Left | Down |  Up  | Right|
+ `-----------------------------------------'             `-----------------------------------------'
+```
+
+
+## コンパイルの仕方
+
+コンパイルは、qmk_firmware のトップディレクトリで行います。
+
+```
+$ cd qmk_firmware
+```
+qmk_firmwareでは各キーボードのコンパイルは、`<キーボード名>:<キーマップ名>`という指定で行います。
+
+```
+$ make zinc:default
+```
+
+キーボードへの書き込みまで同時に行うには下記のように`:avrdude`を付けます。
+
+```
+$ make zinc:default:avrdude
+```
+
+コンパイル結果と中間生成物を消去したい場合は以下のようにします。
+
+```
+$ make zinc:default:clean
+```
+
+## カスタマイズ
+
+コマンドラインからオプションを指定してビルドすることが出来ます。
+
+```
+# Zinc keyboard 'default' keymap: convenient command line option
+make ZINC=<options> zinc:defualt
+#    option= back | under | na | ios
+#    ex.
+#      make ZINC=under    zinc:defualt
+#      make ZINC=under,ios zinc:defualt
+#      make ZINC=back     zinc:default
+#      make ZINC=back,na  zinc:default
+#      make ZINC=back,ios zinc:default
+```
+
+あるいは`qmk_firmware/keyboards/zinc/rev1/keymaps/default/rules.mk` の以下の部分を直接編集して機能を有効化してください。
+
+```
+# Zinc keyboard customize
+LED_BACK_ENABLE = no        # LED backlight (Enable SK6812mini backlight)
+LED_UNDERGLOW_ENABLE = no   # LED underglow (Enable WS2812 RGB underlight)
+LED_ANIMATIONS = yes        # LED animations
+IOS_DEVICE_ENABLE = no      # connect to IOS device (iPad,iPhone)
+
+
+```
+
+## RGB backlight を有効にする
+
+rules.mk の下記の部分を編集して no を yes に変更してください。
+```
+LED_BACK_ENABLE = yes   # LED backlight (Enable SK6812mini backlight)
+```
+
+
+## RGB Underglow を有効にする
+
+rules.mk の下記の部分を編集して no を yes に変更してください。
+```
+LED_UNDERGLOW_ENABLE = yes   # LED underglow (Enable WS2812 RGB underlight.)
+```
+
+
+## iPad/iPhoneサポートを有効にする。
+
+rules.mk の下記の部分を編集して no を yes に変更してください。
+RBG Underglow や RGBバックライトの輝度を抑えて、iPad, iPhone にも接続できるようになります。
+
+```
+IOS_DEVICE_ENABLE = no      # connect to IOS device (iPad,iPhone)
+```

keyboards/zinc/keymaps/ginjake/rules.mk

@@ -0,0 +1,98 @@
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SWAP_HANDS_ENABLE = no        # Enable one-hand typing
+
+define ZINC_CUSTOMISE_MSG
+  $(info Zinc customize)
+  $(info -  LED_BACK_ENABLE=$(LED_BACK_ENABLE))
+  $(info -  LED_UNDERGLOW_ENABLE=$(LED_UNDERGLOW_ENABLE))
+  $(info -  LED_ANIMATION=$(LED_ANIMATIONS))
+  $(info -  IOS_DEVICE_ENABLE=$(IOS_DEVICE_ENABLE))
+endef
+
+# Zinc keyboard customize
+LED_BACK_ENABLE = no        # LED backlight (Enable SK6812mini backlight)
+LED_UNDERGLOW_ENABLE = no   # LED underglow (Enable WS2812 RGB underlight)
+LED_ANIMATIONS = yes        # LED animations
+IOS_DEVICE_ENABLE = no      # connect to IOS device (iPad,iPhone)
+Link_Time_Optimization = no # if firmware size over limit, try this option
+
+####  LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE.
+####    Do not enable these with audio at the same time.
+
+### Zinc keyboard 'default' keymap: convenient command line option
+##    make ZINC=<options> zinc:defualt
+##    option= back | under | na | ios
+##    ex.
+##      make ZINC=under    zinc:defualt
+##      make ZINC=under,ios zinc:defualt
+##      make ZINC=back     zinc:default
+##      make ZINC=back,na  zinc:default
+##      make ZINC=back,ios zinc:default
+
+ifneq ($(strip $(ZINC)),)
+  ifeq ($(findstring back,$(ZINC)), back)
+    LED_BACK_ENABLE = yes
+  else ifeq ($(findstring under,$(ZINC)), under)
+    LED_UNDERGLOW_ENABLE = yes
+  endif
+  ifeq ($(findstring na,$(ZINC)), na)
+    LED_ANIMATIONS = no
+  endif
+  ifeq ($(findstring ios,$(ZINC)), ios)
+    IOS_DEVICE_ENABLE = yes
+  endif
+  $(eval $(call ZINC_CUSTOMISE_MSG))
+  $(info )
+endif
+
+ifeq ($(strip $(LED_BACK_ENABLE)), yes)
+  RGBLIGHT_ENABLE = yes
+  OPT_DEFS += -DRGBLED_BACK
+  ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes)
+    $(eval $(call ZINC_CUSTOMISE_MSG))
+    $(error LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE both 'yes')
+  endif
+else ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes)
+  RGBLIGHT_ENABLE = yes
+else
+  RGBLIGHT_ENABLE = no
+endif
+
+ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
+    OPT_DEFS += -DIOS_DEVICE_ENABLE
+endif
+
+ifeq ($(strip $(LED_ANIMATIONS)), yes)
+#    OPT_DEFS += -DRGBLIGHT_ANIMATIONS
+     OPT_DEFS += -DLED_ANIMATIONS
+
+endif
+
+ifeq ($(strip $(Link_Time_Optimization)),yes)
+    EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization
+endif
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+
+# Uncomment these for debugging
+# $(info -- RGBLIGHT_ENABLE=$(RGBLIGHT_ENABLE))
+# $(info -- OPT_DEFS=$(OPT_DEFS))
+# $(info )

layouts/community/ortho_5x15/wanleg/keymap.c

@@ -1,26 +1,71 @@
 #include QMK_KEYBOARD_H
 #include "wanleg.h"
 
-#define _________________BLANK_75__________________ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
 #define _________________BLANK_50__________________ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
-#define _________________Num_Row_75________________ KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_NLCK
+
+#if defined(PADC)
+#define LAYOUT_75_base( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, K0c, K0d, K0e, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, K1c, K1d, K1e, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, K2c, K2d, K2e, \
+	K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, K3c, K3d, K3e  \
+  ) \
+   LAYOUT_ortho_5x15_wrapper( \
+     KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_NLCK,  QWERTY, GHERKIN, FUNCTION, \
+     K00, K01, K02, K03, K04, K05, 		K0c,  K0d,  K0e,		K06, K07, K08, K09, K0a, K0b, \
+     K10, K11, K12, K13, K14, K15, 		K1c,  K1d,  K1e,		K16, K17, K18, K19, K1a, K1b, \
+     K20, K21, K22, K23, K24, K25, 		K2c,  K2d,  K2e,		K26, K27, K28, K29, K2a, K2b, \
+     K30, K31, K32, K33, K34, K35, 		K3c,  K3d,  K3e,	    K36, K37, K38, K39, K3a, K3b  \
+  )
+
+#elif defined(PADL)
+#define LAYOUT_75_base( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, K0c, K0d, K0e, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, K1c, K1d, K1e, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, K2c, K2d, K2e, \
+	K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, K3c, K3d, K3e  \
+  ) \
+   LAYOUT_ortho_5x15_wrapper( \
+     KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_NLCK,  QWERTY, GHERKIN, FUNCTION, \
+     K0c,  K0d,  K0e,		K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, \
+     K1c,  K1d,  K1e, 		K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, \
+     K2c,  K2d,  K2e, 		K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, \
+     K3c,  K3d,  K3e,  		K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b 	\
+  )
+  
+#else
+#define LAYOUT_75_base( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, K0c, K0d, K0e, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, K1c, K1d, K1e, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, K2c, K2d, K2e, \
+	K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, K3c, K3d, K3e  \
+  ) \
+   LAYOUT_ortho_5x15_wrapper( \
+     KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_NLCK,  QWERTY, GHERKIN, FUNCTION, \
+     K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, 		K0c,  K0d,  K0e, \
+     K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, 		K1c,  K1d,  K1e, \
+     K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, 		K2c,  K2d,  K2e, \
+     K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, 		K3c,  K3d,  K3e  \
+  )
+#endif  
+
+#define LAYOUT_75_base_wrapper(...)       LAYOUT_75_base(__VA_ARGS__)
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 #if defined(KEYBOARD_40percentclub_5x5)
-[GK75] = LAYOUT_ortho_5x15_wrapper(
-  _________________Num_Row_75________________, QWERTY75, XXXXXXX, FUNCTION75,
-  _______________GherkinLike_0_______________, KC_KP_7, KC_KP_8, KC_KP_9,
-  _______________GherkinLike_1_______________, KC_KP_4, KC_KP_5, KC_KP_6,
-  TD(TD_SFT_CAPS), SFT_T(KC_Z), KC_X, KC_C, LT(NUM75, KC_V), LT(ETC75, KC_B), KC_N, LT(DIR75, KC_M), GUI_T(KC_COMM), ALT_T(KC_DOT), CTL_T(KC_BSPC), SFT_T(KC_ENT), KC_KP_1, KC_KP_2, KC_KP_3,
-  TD(RST_TAP_DANCE), GHERKIN50, KC_LALT, NUMPAD, NUMBER75, ETCETERA75, KC_SPC,DIRECTION75, KC_RGUI, KC_RALT, KC_DEL, KC_RCTL, KC_KP_0, KC_KP_0, KC_KP_DOT
+[_GK] = LAYOUT_75_base_wrapper(
+  _______________GherkinLike_0_______________, KC_7, KC_8, KC_9,
+  _______________GherkinLike_1_______________, KC_4, KC_5, KC_6,
+  TD(TD_SFT_CAPS), SFT_T(KC_Z), KC_X, KC_C, LT(NUM, KC_V), LT(ETC, KC_B), KC_N, LT(DIR, KC_M), GUI_T(KC_COMM), ALT_T(KC_DOT), CTL_T(KC_BSPC), SFT_T(KC_ENT), KC_1, KC_2, KC_3,
+  TD(RST_TAP_DANCE), GHERKIN50, KC_LALT, NUMPAD, NUMBER, ETCETERA, KC_SPC,DIRECTION, KC_RGUI, KC_RALT, KC_DEL, KC_RCTL, KC_0, KC_0, KC_DOT
 ),
 
 [GK50] = LAYOUT_ortho_5x10_wrapper(
-  KC_ESC,    _______, _______, _______, _______, _______, _______, _______, _______,    KC_BSPC,
+  KC_ESC, _______, _______, _______, _______, _______, _______, _______, _______, KC_BSPC,
   _______________Gherkin_Row_0_______________,
   _______________Gherkin_Row_1_______________,
   _______________Gherkin_Row_2_______________,
-  TD(RST_TAP_DANCE), GHERKIN75, NUMPAD, gNUMBER, gETCETERA, KC_SPC,gDIRECTION, KC_RGUI, KC_RALT, KC_RGUI
+  TD(RST_TAP_DANCE), GHERKIN, NUMPAD, gNUMBER, gETCETERA, KC_SPC,gDIRECTION, KC_RGUI, KC_RALT, KC_RGUI
 ),
 
 [gNUM] = LAYOUT_ortho_5x10_wrapper(
@@ -65,9 +110,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 ),
 #endif
 #else
- /* Gherkin 75
+ /* Gherkin
  * .--------------------------------------------------------------------------------------------------------------------------------------.
- * | ESC    | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      | NUMLOCK| qwerty |        | FN     |
+ * | ESC    | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      | NUMLOCK| qwerty | gherkin| FN     |
  * |-----------------------------------------------------------------------------------------------------------+--------+--------+--------|
  * |                                                                                                           |   7    |   8    |   9    |
  * |                                                                                                           |--------+--------+--------|
@@ -78,17 +123,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |                                                                                                           |   0    |   0    |   .    |
  * '--------------------------------------------------------------------------------------------------------------------------------------'
  */
-[GK75] = LAYOUT_ortho_5x15_wrapper(
-  _________________Num_Row_75________________, QWERTY75, XXXXXXX, FUNCTION75,
-  _______________GherkinLike_0_______________, KC_KP_7, KC_KP_8, KC_KP_9,
-  _______________GherkinLike_1_______________, KC_KP_4, KC_KP_5, KC_KP_6,
-  TD(TD_SFT_CAPS), SFT_T(KC_Z), KC_X, KC_C, LT(NUM75, KC_V), LT(ETC75, KC_B), KC_N, LT(DIR75, KC_M), GUI_T(KC_COMM), ALT_T(KC_DOT), CTL_T(KC_BSPC), SFT_T(KC_ENT), KC_KP_1, KC_KP_2, KC_KP_3,
-  KC_LCTL, KC_LGUI, KC_LALT, KC_LALT, NUMBER75, ETCETERA75, KC_SPC,DIRECTION75, KC_RGUI, KC_RALT, KC_DEL, KC_RCTL, KC_KP_0, KC_KP_0, KC_KP_DOT
+[_GK] = LAYOUT_75_base_wrapper(
+  _______________GherkinLike_0_______________, KC_7, KC_8, KC_9,
+  _______________GherkinLike_1_______________, KC_4, KC_5, KC_6,
+  _______________GherkinLike_2_______________, KC_1, KC_2, KC_3,
+  _______________GherkinLike_3_______________, KC_0, KC_0, KC_DOT
 ),
 #endif
- /* QWERTY 75
+/* QWERTY
  * .--------------------------------------------------------------------------------------------------------------------------------------.
- * | ESC    | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      | NUMLOCK| gherkin|        | FN     |
+ * | ESC    | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      | NUMLOCK| qwerty | gherkin| FN     |
  * |-----------------------------------------------------------------------------------------------------------+--------+--------+--------|
  * |                                                                                                           |   7    |   8    |   9    |
  * |                                                                                                           |--------+--------+--------|
@@ -99,17 +143,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |                                                                                                           |   0    |   0    |   .    |
  * '--------------------------------------------------------------------------------------------------------------------------------------'
  */
-[QW75] = LAYOUT_ortho_5x15_wrapper(
-  _________________Num_Row_75________________, GHERKIN75, XXXXXXX, FUNCTION75,
-  _______________Qwerty_Row__0_______________, KC_KP_7, KC_KP_8, KC_KP_9,
-  _______________Qwerty_Row__1_______________, KC_KP_4, KC_KP_5, KC_KP_6,
-  _______________Qwerty_Row__2_______________, KC_KP_1, KC_KP_2, KC_KP_3,
-  KC_LCTL, KC_LGUI, KC_LALT, KC_LALT, SUBTER75, KC_LSFT, KC_SPC, SUPRA75, KC_RGUI, KC_RALT, KC_DEL, KC_RCTL, KC_KP_0, KC_KP_0, KC_KP_DOT
+[_QW] = LAYOUT_75_base_wrapper(
+  _______________Qwerty_Row__0_______________, KC_7, KC_8, KC_9,
+  _______________Qwerty_Row__1_______________, KC_4, KC_5, KC_6,
+  _______________Qwerty_Row__2_______________, KC_1, KC_2, KC_3,
+  _______________Qwerty_Row__3_______________, KC_0, KC_0, KC_DOT
 ),
 
- /* SUBTER75
+ /* SUBTER
  * .--------------------------------------------------------------------------------------------------------------------------------------.
- * |                                            SUBTER ROW 0 LAYOUT                                            |        |        |        |
+ * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
  * |-----------------------------------------------------------------------------------------------------------+--------+-----------------|
  * |                                                                                                           |   /    |   *    |   -    |
  * |                                                                                                           |--------+--------+--------|
@@ -120,15 +163,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |                                                                                                           |        |        |        |
  * '--------------------------------------------------------------------------------------------------------------------------------------'
  */
-[SUB75] = LAYOUT_ortho_5x15_wrapper(
-  _______________SUBTER_Row__0_______________, _______, _______, _______,
+[SUB] = LAYOUT_75_base_wrapper(
   _______________SUBTER_Row__0_______________, KC_PSLS, KC_PAST, KC_PMNS,
-  _______________SUBTER_Row__1_______________, _______, _______, KC_PPLS,
+  _______________SUBTER_Row__1_______________, _______, _______, KC_PPLS, 
   _______________SUBTER_Row__2_______________, _______, _______, KC_PENT,
-  _______, _______, GHERKIN75, _______, _______, _______, KC_ENT, KC_LSFT, _______, _______,	_______,	_______, _______,	_______,	_______
+  _______________SUBTER_Row__3_______________, _______,	_______, _______
 ),
 
-/* SUPRA75
+/* SUPRA
  * .--------------------------------------------------------------------------------------------------------------------------------------.
  * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
@@ -141,15 +183,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |                                                                                                           |        |        |        |
  * '--------------------------------------------------------------------------------------------------------------------------------------'
  */
-[SUP75] = LAYOUT_ortho_5x15_wrapper(
-  _________________BLANK_75__________________,
+[SUP] = LAYOUT_75_base_wrapper(
   ________________SUPRA_Row_0________________, _______, _______, _______,
   ________________SUPRA_Row_1________________, _______, _______, _______,
   ________________SUPRA_Row_2________________, _______, _______, _______,
-  _________________BLANK_75__________________
+  ________________SUPRA_Row_3________________, _______, _______, _______
 ),
 
-/* Gherkin 75 Numbers
+/* Gherkin Numbers
  * .--------------------------------------------------------------------------------------------------------------------------------------.
  * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
  * |-----------------------------------------------------------------------------------------------------------|--------+-----------------|
@@ -162,15 +203,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |                                                                                                           |        |        |        |
  * '--------------------------------------------------------------------------------------------------------------------------------------'
  */
-[NUM75] = LAYOUT_ortho_5x15_wrapper(
-  _________________BLANK_75__________________,
+[NUM] = LAYOUT_75_base_wrapper(
   _______________NUMBERS_Row_0_______________, KC_PSLS, KC_PAST, KC_PMNS,
   _______________NUMBERS_Row_1_______________, _______, _______, KC_PPLS,
   _______________NUMBERS_Row_2_______________, _______, _______, KC_PENT,
   _______________NUMBERS_Row_3_______________, _______, _______, _______
 ),
 
-/* Gherkin 75 Et Cetera
+/* Gherkin Et Cetera
  * .--------------------------------------------------------------------------------------------------------------------------------------.
  * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
  * |-----------------------------------------------------------------------------------------------------------|--------+-----------------|
@@ -183,15 +223,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |                                                                                                           |        |        |        |
  * '--------------------------------------------------------------------------------------------------------------------------------------'
  */
-[ETC75] = LAYOUT_ortho_5x15_wrapper(
-  _________________BLANK_75__________________,
+[ETC] = LAYOUT_75_base_wrapper(
   ______________ETCETERA_Row__0______________, _______, _______, _______,
   ______________ETCETERA_Row__1______________, _______, _______, _______,
   ______________ETCETERA_Row__2______________, _______, _______, _______,
   ______________ETCETERA_Row__3______________, _______, _______, _______
 ),
 
-/* Gherkin 75 Directional Keys
+/* Gherkin Directional Keys
  * .--------------------------------------------------------------------------------------------------------------------------------------.
  * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
  * |-----------------------------------------------------------------------------------------------------------|--------+-----------------|
@@ -204,16 +243,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |                                                                                                           |        |        |        |
  * '--------------------------------------------------------------------------------------------------------------------------------------'
  */
-[DIR75] = LAYOUT_ortho_5x15_wrapper(
-  _________________BLANK_75__________________,
+[DIR] = LAYOUT_75_base_wrapper(
   _____________DIRECTIONS_Row__0_____________, _______, _______, _______,
   _____________DIRECTIONS_Row__1_____________, _______, _______, _______,
   _____________DIRECTIONS_Row__2_____________, _______, _______, _______,
-  _______, _______, QWERTY75,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+  _____________DIRECTIONS_Row__3_____________, _______, _______, _______
 ),
 
 
-/* FUNCTION 75
+/* FUNCTION 
  * .--------------------------------------------------------------------------------------------------------------------------------------.
  * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
@@ -226,9 +264,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |        |        |        |        |        |        | MS BT1 |        |        |        |        |        | MOUS L | MOUS D | MOUS R |
  * '--------------------------------------------------------------------------------------------------------------------------------------'
  */
-[FN75] = LAYOUT_ortho_5x15_wrapper(
-  _________________BLANK_75__________________,
-  _________________BLANK_75__________________,
+[_FN] = LAYOUT_75_base_wrapper(
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
   KC_CAPS, KC_BTN5, KC_BTN4, KC_BTN3, KC_BTN2, KC_ACL0, KC_ACL2, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______, _______, _______, KC_WH_U,
   RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, BL_TOGG, BL_INC,  BL_DEC,  _______, _______, KC_MS_U, KC_WH_D,
   _______, _______, _______, _______, _______, _______, KC_BTN1, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R

quantum/process_keycode/process_leader.c

@@ -68,9 +68,7 @@ bool process_leader(uint16_t keycode, keyrecord_t *record) {
     } else {
       if (keycode == KC_LEAD) {
         qk_leader_start();
-        return false;
       }
-      break;
     }
   }
   return true;

quantum/process_keycode/process_tap_dance.c

@@ -131,6 +131,7 @@ void preprocess_tap_dance(uint16_t keycode, keyrecord_t *record) {
       if (keycode == action->state.keycode && keycode == last_td)
         continue;
       action->state.interrupted = true;
+      action->state.interrupting_keycode = keycode;
       process_tap_dance_action_on_dance_finished (action);
       reset_tap_dance (&action->state);
     }
@@ -209,5 +210,6 @@ void reset_tap_dance (qk_tap_dance_state_t *state) {
   state->count = 0;
   state->interrupted = false;
   state->finished = false;
+  state->interrupting_keycode = 0;
   last_td = 0;
 }

quantum/process_keycode/process_tap_dance.h

@@ -27,6 +27,7 @@ typedef struct
   uint8_t oneshot_mods;
   uint8_t weak_mods;
   uint16_t keycode;
+  uint16_t interrupting_keycode;
   uint16_t timer;
   bool interrupted;
   bool pressed;

quantum/rgb_matrix.c

@@ -973,7 +973,7 @@ void rgb_matrix_mode_noeeprom(uint8_t mode) {
     rgb_matrix_config.mode = mode;
 }
 
-uint32_t rgb_matrix_get_mode(void) {
+uint8_t rgb_matrix_get_mode(void) {
     return rgb_matrix_config.mode;
 }
 

quantum/rgb_matrix.h

@@ -180,7 +180,7 @@ void rgb_matrix_increase_speed(void);
 void rgb_matrix_decrease_speed(void);
 void rgb_matrix_mode(uint8_t mode);
 void rgb_matrix_mode_noeeprom(uint8_t mode);
-uint32_t rgb_matrix_get_mode(void);
+uint8_t rgb_matrix_get_mode(void);
 
 #ifndef RGBLIGHT_ENABLE
 #define rgblight_toggle() rgb_matrix_toggle()

quantum/rgblight.c

@@ -234,7 +234,7 @@ void rgblight_step_reverse(void) {
   rgblight_step_reverse_helper(true);
 }
 
-uint32_t rgblight_get_mode(void) {
+uint8_t rgblight_get_mode(void) {
   if (!rgblight_config.enable) {
     return false;
   }

quantum/rgblight.h

@@ -167,7 +167,7 @@ void rgblight_enable(void);
 void rgblight_disable(void);
 void rgblight_step(void);
 void rgblight_step_reverse(void);
-uint32_t rgblight_get_mode(void);
+uint8_t rgblight_get_mode(void);
 void rgblight_mode(uint8_t mode);
 void rgblight_set(void);
 void rgblight_update_dword(uint32_t dword);

quantum/split_common/serial.c

@@ -90,7 +90,7 @@
 
 #ifndef SELECT_SOFT_SERIAL_SPEED
 #define SELECT_SOFT_SERIAL_SPEED 1
-//  0: about 189kbps (Experiment only)
+//  0: about 189kbps (Experimental only)
 //  1: about 137kbps (default)
 //  2: about 75kbps
 //  3: about 39kbps

quantum/split_common/split_util.c

@@ -36,8 +36,7 @@ static void setup_handedness(void) {
     #ifdef EE_HANDS
       isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
     #else
-      // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
-      #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT)
+      #ifdef MASTER_RIGHT
         isLeftHand = !has_usb();
       #else
         isLeftHand = has_usb();

users/wanleg/rules.mk

@@ -27,4 +27,13 @@ ifeq ($(strip $(BT)), yes)
   CONSOLE_ENABLE = no 		# Console for debug(+400)
   COMMAND_ENABLE = no 		# Commands for debug and configuration
   RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+endif
+
+#move numpad to Left/Centre/Right(default) on 5x15 boards
+#example usage: make 4x4:wanleg padc=yes
+ifeq ($(strip $(padc)), yes)
+	OPT_DEFS += -DPADC
+endif
+ifeq ($(strip $(padl)), yes)
+	OPT_DEFS += -DPADL
 endif

users/wanleg/tapdances.c

@@ -168,7 +168,7 @@ void LYR75_finished (qk_tap_dance_state_t *state, void *user_data) {
   LYR75tap_state.state = cur_dance(state);
   switch (LYR75tap_state.state) {
 	case SINGLE_TAP: register_code(KC_PSLS); break;
-	case DOUBLE_TAP: set_single_persistent_default_layer(GK75); break;
+	case DOUBLE_TAP: set_single_persistent_default_layer(_GK); break;
     case DOUBLE_SINGLE_TAP: register_code(KC_PSLS); unregister_code(KC_PSLS); register_code(KC_PSLS);
   }
 }
@@ -176,7 +176,7 @@ void LYR75_finished (qk_tap_dance_state_t *state, void *user_data) {
 void LYR75_reset (qk_tap_dance_state_t *state, void *user_data) {
   switch (LYR75tap_state.state) {
     case SINGLE_TAP: unregister_code(KC_PSLS); break;
-    case DOUBLE_TAP: set_single_persistent_default_layer(GK75); break;
+    case DOUBLE_TAP: set_single_persistent_default_layer(_GK); break;
     case DOUBLE_SINGLE_TAP: unregister_code(KC_PSLS);
   }
   LYR75tap_state.state = 0;

users/wanleg/wanleg.c

@@ -29,18 +29,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
       }
       return false;
       break;
-    case QWERTY75:
-    if (record->event.pressed) {
-      set_single_persistent_default_layer(QW75);
-      }
-      return false;
-      break;
-    case GHERKIN75:
-    if (record->event.pressed) {
-      set_single_persistent_default_layer(GK75);
-      }
-      return false;
-      break;
     case NUMPAD:
     if (record->event.pressed) {
       set_single_persistent_default_layer(PAD);
@@ -117,51 +105,11 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
       }
       return false;
       break;
-	case SUBTER75:
+	case FUNCTION:
       if (record->event.pressed) {
-        layer_on(SUB75);
+        layer_on(_FN);
       } else {
-        layer_off(SUB75);
-      }
-      return false;
-      break;
-	case SUPRA75:
-      if (record->event.pressed) {
-        layer_on(SUP75);
-      } else {
-        layer_off(SUP75);
-      }
-      return false;
-      break;
-	case NUMBER75:
-      if (record->event.pressed) {
-        layer_on(NUM75);
-      } else {
-        layer_off(NUM75);
-      }
-      return false;
-      break;
-	case DIRECTION75:
-      if (record->event.pressed) {
-        layer_on(DIR75);
-      } else {
-        layer_off(DIR75);
-      }
-      return false;
-      break;
-	case ETCETERA75:
-      if (record->event.pressed) {
-        layer_on(ETC75);
-      } else {
-        layer_off(ETC75);
-      }
-      return false;
-      break;
-	case FUNCTION75:
-      if (record->event.pressed) {
-        layer_on(FN75);
-      } else {
-        layer_off(FN75);
+        layer_off(_FN);
       }
       return false;
       break;

users/wanleg/wanleg.h

@@ -11,72 +11,33 @@ enum userspace_layers {
   gETC,
   _GK,
   _QW,
-  QW75,
-  GK75,
   ONE,
   SUB,
   SUP,
   NUM,
   DIR,
   ETC,
-  SUB75,
-  SUP75,
-  NUM75,
-  DIR75,
-  ETC75,
-  FN75,
+  _FN,
   PAD,
   GK50,
 };
-#elif KEYBOARD_xd75
-enum userspace_layers {
-  GK75 = 0,
-  QW75,
-  SUB75,
-  SUP75,
-  NUM75,
-  DIR75,
-  ETC75,
-  FN75,
-  gGK,
-  _GK,
-  _QW,
-  PAD,
-  ONE,
-  SUB,
-  SUP,
-  NUM,
-  DIR,
-  ETC,
-  gNUM,
-  gDIR,
-  gETC,
-  GK50,
-};
 #elif KEYBOARD_40percentclub_5x5
 enum userspace_layers {
   GK50 = 0,
+  _GK,
+  _QW,
+  PAD,
   gNUM,
   gDIR,
   gETC,
-  GK75,
-  QW75,
-  SUB75,
-  SUP75,
-  NUM75,
-  DIR75,
-  ETC75,
-  FN75,
-  PAD,
   gGK,
-  _GK,
-  _QW,
   ONE,
   SUB,
   SUP,
   NUM,
   DIR,
   ETC,
+  _FN,
 };
 #else
   enum userspace_layers {
@@ -93,14 +54,7 @@ enum userspace_layers {
   gNUM,
   gDIR,
   gETC,
-  QW75,
-  GK75,
-  SUB75,
-  SUP75,
-  NUM75,
-  DIR75,
-  ETC75,
-  FN75,
+  _FN,
   GK50,
 };
 #endif
@@ -109,8 +63,6 @@ enum userspace_custom_keycodes {
   gGHERKIN = SAFE_RANGE,
   GHERKIN,
   QWERTY,
-  QWERTY75,
-  GHERKIN75,
   ONEHAND,
   SUBTER,
   SUPRA,
@@ -120,12 +72,7 @@ enum userspace_custom_keycodes {
   gNUMBER,
   gDIRECTION,
   gETCETERA,
-  SUBTER75,
-  SUPRA75,
-  NUMBER75,
-  DIRECTION75,
-  ETCETERA75,
-  FUNCTION75,
+  FUNCTION,
   NUMPAD,
   GHERKIN50,
 
@@ -215,14 +162,14 @@ enum {
 
 /* Et Cetera
  * .-----------------------------------------------------------------------------------------.
- * |  `     | mUP    |        |        | RESET  | SHIFT  | mScrUp | mScrDn |        |  \     |
+ * |  `     | mUP    |        |        | RESET  | SHIFT  | mScrDn | mScrUp |        |  \     |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
  * | mLeft  | mDown  | mRight |        | SHIFT  | mBtn3  | mBtn1  | mBtn2  |  ;     |  '     |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
  * | Sft//Cp| CAPS   |        |        |        | C-A-D  | mScrL  | mScrR  | ALT    |  DEL   |
  * '-----------------------------------------------------------------------------------------'
  */
-#define _______________Gherkin_ETC_0_______________			KC_GRV, 		KC_MS_U, _______,_______, RESET,   KC_RSFT, 			KC_WH_U, KC_WH_D, _______, KC_BSLS
+#define _______________Gherkin_ETC_0_______________			KC_GRV, 		KC_MS_U, _______,_______, RESET,   KC_RSFT, 			KC_WH_D, KC_WH_U, _______, KC_BSLS
 #define _______________Gherkin_ETC_1_______________			KC_MS_L, 		KC_MS_D, KC_MS_R,_______, KC_LSFT, KC_BTN3, 			KC_BTN1, KC_BTN2, KC_SCLN, KC_QUOT
 #define _______________Gherkin_ETC_2_______________			TD(TD_SFT_CAPS),KC_CAPS, _______,_______, _______, LALT(LCTL(KC_DEL)),	KC_WH_L, KC_WH_R, KC_LALT, KC_DEL