First version of top dampener

3d-models/switch-dampener.scad

@@ -1,23 +1,50 @@
 $fn = 32;
 
+$space = 5;
 $width = 15.2;
 $length = $width;
 $height = 0.4;
+$holes = $height*4;
+
+$columns = 6;
+$rows = 5;
+
 module pin(){
-    cylinder(h=$height+1, r=1, center=true);
+    cylinder(h=$holes, r=1, center=false);
 }
-difference(){
-    cube([$width,$length, $height], center=true);
-    cylinder(h=$height+1, r=2.522, center=true);
-    translate([0,5.9,0])
+
+module switch(){
+    $xCenter = $width/2;
+    $yCenter = $length/2;
+    translate([$xCenter, $yCenter, 0])
+        cylinder(h=$holes, r=2.522, center=false);
+    translate([$xCenter + 0, $yCenter + 5.9,0])
         pin();
-    translate([5,3.8,0])
+    translate([$xCenter + 5, $yCenter + 3.8,0])
         pin();
-    translate([-5,3.8,0])
+    translate([$xCenter + -5, $yCenter + 3.8,0])
         pin();
-    translate([-5,-5.15,0])
+    translate([$xCenter + -5, $yCenter + -5.15,0])
         pin();
-    translate([5,-5.15,0])
+    translate([$xCenter + 5, $yCenter+-5.15,0])
         pin();
  }
 
+module switches(){
+for (x=[0:$columns -1])
+   for (y=[0:$rows-1])
+      translate([x * ($width + $space/2) ,y * ($length+$space/2) ,0]) 
+        switch();
+}
+
+module body(){
+    $x = (($width + ($space/2)) * $columns) + $width;
+    $y = (($length + ($space/2)) * $rows) + $width;
+    cube([$x, $y, $height]);
+}
+
+difference(){
+body();
+translate([$space,$space,$holes/2*-1])
+switches();
+}

3d-models/top-dampener.scad

@@ -1,14 +1,26 @@
 $fn = 32;
 
-$space = 5;
+$space = 5.3;
 $width = 15.2;
 $length = $width;
 $height = 0.4;
 $holes = $height*4;
+$cut = $holes/2*-1;
 
 $columns = 6;
 $rows = 5;
 
+$xBase = (($width + $space) * $columns) + $space;
+$yBase = (($length + $space) * $rows) + $space;
+
+$yTop = 30.750;
+$xTop = 101.348;
+
+$xPico = 52.53;
+$yPico = 25;
+
+$xAux = 10;
+$yAux = 14.5;
 module pin(){
     cylinder(h=$holes, r=1, center=false);
 }
@@ -28,23 +40,41 @@ module switch(){
         pin();
     translate([$xCenter + 5, $yCenter+-5.15,0])
         pin();
+    translate([0, $length, 0])
+    cube([$width, $space-1, $holes]);
  }
 
+
 module switches(){
 for (x=[0:$columns -1])
    for (y=[0:$rows-1])
-      translate([x * ($width + $space/2) ,y * ($length+$space/2) ,0]) 
+      translate([x * ($width + $space) ,y * ($length+$space) ,0]) 
         switch();
 }
 
 module body(){
-    $x = (($width + ($space/2)) * $columns) + $width;
-    $y = (($length + ($space/2)) * $rows) + $width;
-    cube([$x, $y, $height]);
+    difference(){
+        cube([$xBase, $yBase + $yTop, $height]);
+        translate([$xTop,$yBase + $yTop,$holes/2*-1]){
+            rotate([0,0,-45]){
+                cube([1000, 1000, $holes]);
+            }
+        }
+    }
+}
+
+module pico(){
+    translate([0,$yTop + $yBase - $yPico,$cut]){
+        cube([$xPico, $yPico, $holes]);
+    }
+    translate([$xPico, $yBase + $yTop - $yAux, $cut]){
+        cube([$xAux, $yAux, $holes]);
+    }
 }
 
 difference(){
     body();
+    pico();
     translate([$space,$space,$holes/2*-1])
         switches();
 }