Added rev2

rev2/3d-models/switch-dampener.scad

@@ -0,0 +1,50 @@
+$fn = 32;
+
+$space = 5;
+$width = 15.2;
+$length = $width;
+$height = 0.4;
+$holes = $height*4;
+
+$columns = 6;
+$rows = 5;
+
+module pin(){
+    cylinder(h=$holes, r=1, center=false);
+}
+
+module switch(){
+    $xCenter = $width/2;
+    $yCenter = $length/2;
+    translate([$xCenter, $yCenter, 0])
+        cylinder(h=$holes, r=2.522, center=false);
+    translate([$xCenter + 0, $yCenter + 5.9,0])
+        pin();
+    translate([$xCenter + 5, $yCenter + 3.8,0])
+        pin();
+    translate([$xCenter + -5, $yCenter + 3.8,0])
+        pin();
+    translate([$xCenter + -5, $yCenter + -5.15,0])
+        pin();
+    translate([$xCenter + 5, $yCenter+-5.15,0])
+        pin();
+ }
+
+module switches(){
+for (x=[0:$columns -1])
+   for (y=[0:$rows-1])
+      translate([x * ($width + $space/2) ,y * ($length+$space/2) ,0]) 
+        switch();
+}
+
+module body(){
+    $x = (($width + ($space/2)) * $columns) + $width;
+    $y = (($length + ($space/2)) * $rows) + $width;
+    cube([$x, $y, $height]);
+}
+
+difference(){
+body();
+translate([$space,$space,$holes/2*-1])
+switches();
+}

rev2/3d-models/top-dampener.scad

@@ -0,0 +1,80 @@
+$fn = 32;
+
+$space = 5.3;
+$width = 15.2;
+$length = $width;
+$height = 1;
+$holes = $height*4;
+$cut = $holes/2*-1;
+
+$columns = 6;
+$rows = 5;
+
+$xBase = (($width + $space) * $columns) + $space;
+$yBase = (($length + $space) * $rows) + $space;
+
+$yTop = 30.750;
+$xTop = 101.348;
+
+$xPico = 52.53;
+$yPico = 25;
+
+$xAux = 10;
+$yAux = 14.5;
+module pin(){
+    cylinder(h=$holes, r=1, center=false);
+}
+
+module switch(){
+    $xCenter = $width/2;
+    $yCenter = $length/2;
+    translate([$xCenter, $yCenter, 0])
+        cylinder(h=$holes, r=2.522, center=false);
+    translate([$xCenter + 0, $yCenter + 5.9,0])
+        pin();
+    translate([$xCenter + 5, $yCenter + 3.8,0])
+        pin();
+    translate([$xCenter + -5, $yCenter + 3.8,0])
+        pin();
+    translate([$xCenter + -5, $yCenter + -5.15,0])
+        pin();
+    translate([$xCenter + 5, $yCenter+-5.15,0])
+        pin();
+    translate([0, $length + 1.4, 0])
+    cube([$width, 3, $holes]);
+ }
+
+
+module switches(){
+for (x=[0:$columns -1])
+   for (y=[0:$rows-1])
+      translate([x * ($width + $space) ,y * ($length+$space) ,0]) 
+        switch();
+}
+
+module body(){
+    difference(){
+        cube([$xBase, $yBase + $yTop, $height]);
+        translate([$xTop,$yBase + $yTop,$holes/2*-1]){
+            rotate([0,0,-45]){
+                cube([1000, 1000, $holes]);
+            }
+        }
+    }
+}
+
+module pico(){
+    translate([0,$yTop + $yBase - $yPico,$cut]){
+        cube([$xPico, $yPico, $holes]);
+    }
+    translate([$xPico, $yBase + $yTop - $yAux, $cut]){
+        cube([$xAux, $yAux, $holes]);
+    }
+}
+
+difference(){
+    body();
+    pico();
+    translate([$space,$space,$holes/2*-1])
+        switches();
+}

rev2/5x6.kicad_dru

@@ -0,0 +1,169 @@
+(version 1)
+#PCBWay Custom DRC for Kicad 7
+
+# ----------------------------------- Minimum trace width and spacing (PICK ONE) --------------------
+
+# 2oz copper
+#(rule "Minimum Trace Width and Spacing (outer layer)"
+#(constraint track_width (min 0.1524mm))
+#(constraint clearance (min 0.1778mm))
+#(layer outer)
+#(condition "A.Type == 'track'"))
+
+#(rule "Minimum Trace Width and Spacing (innner layer)"
+#(constraint track_width (min 0.1524mm))
+#(constraint clearance (min 0.1778mm))
+#(layer inner)
+#(condition "A.Type == 'track'"))
+
+
+# 2-layer, 1oz copper
+(rule "Minimum Trace Width and Spacing (outer layer)"
+(constraint track_width (min 0.127mm))
+(constraint clearance (min 0.127mm))
+(layer outer)
+(condition "A.Type == 'track'"))
+
+(rule "Minimum Trace Width and Spacing (inner layer)"
+(constraint track_width (min 0.1mm))
+(constraint clearance (min 0.1mm))
+(layer inner)
+(condition "A.Type == 'track'"))
+
+# 4-layer , 1oz and 0.5oz copper
+#(rule "Minimum Trace Width and Spacing (outer layer)"
+#(constraint track_width (min 0.09mm))
+#(constraint clearance (min 0.09mm))
+#(layer outer)
+#(condition "A.Type == 'track'"))
+
+#(rule "Minimum Trace Width and Spacing (inner layer)"
+#(constraint track_width (min 0.1mm))
+#(constraint clearance (min 0.09mm))
+#(layer inner)
+#(condition "A.Type == 'track'"))
+
+# ------------------------------------------------------------------------------------------------------
+
+# Drill/hole size - listed here to maintain order of rule application. Must not override rule set in Via hole/diameter size below.
+(rule "drill hole size (mechanical)"
+(constraint hole_size (min 0.15mm) (max 6.3mm)))
+
+# ----------------------------------- Via hole/diameter size (PICK ONE) ------------------------------------
+
+# 2-layer standard
+(rule "Minimum Via Diameter and Hole Size"
+(constraint hole_size (min 0.3mm))
+(constraint via_diameter (min 0.5mm))
+(condition "A.Type == 'via'"))
+
+# 4-layer standard
+#(rule "Minimum Via Diameter and Hole Size"
+#(constraint hole_size (min 0.3mm))
+#(constraint via_diameter (min 0.45mm))
+#(condition "A.Type == 'via'"))
+
+# 4-layer advanced
+#(rule "Minimum Via Diameter and Hole Size"
+#(constraint hole_size (min 0.25mm))
+#(constraint via_diameter (min 0.4mm))
+#(constraint disallow buried_via)
+#(condition "A.Type == 'via'"))
+
+# 4-layer advanced
+#(rule "Minimum Via Diameter and Hole Size"
+#(constraint hole_size (min 0.2mm))
+#(constraint via_diameter (min 0.35mm))
+#(condition "A.Type == 'via'"))
+
+# 4-layer advanced
+#(rule "Minimum Via Diameter and Hole Size"
+#(constraint hole_size (min 0.15mm))
+#(constraint via_diameter (min 0.3mm))
+#(condition "A.Type == 'via'"))
+
+# ----------------------------------- Drill/hole size ------------------------------------
+
+(rule "PTH Hole Size"
+(constraint hole_size (min 0.2mm) (max 6.35mm))
+(condition "A.Type != 'Via' && A.isPlated()"))
+
+(rule "Minimum Non-plated Hole Size"
+(constraint hole_size (min 0.5mm))
+(condition "A.Type == 'pad' && !A.isPlated()"))
+
+(rule "Pad Size"
+(constraint hole_size (min 0.5mm))
+(constraint annular_width (min 0.25mm))
+(condition "A.Type == 'Pad' && A.isPlated()"))
+
+(rule "Minimum Castellated Hole Size"
+(constraint hole_size (min 0.6mm))
+(condition "A.Type == 'pad' && A.Fabrication_Property == 'Castellated pad'"))
+
+(rule "Min. Plated Slot Width"
+(constraint hole_size (min 0.5mm))
+(condition "(A.Hole_Size_X != A.Hole_Size_Y) && A.isPlated()"))
+
+(rule "Min. Non-Plated Slot Width"
+(constraint hole_size (min 0.8mm))
+(condition "(A.Hole_Size_X != A.Hole_Size_Y) && !A.isPlated()"))
+
+# ----------------------------------- Minimum clearance ----------------------------------
+(rule "hole to hole clearance (different nets)"
+(constraint hole_to_hole (min 0.5mm))
+(condition "A.Net != B.Net"))
+
+(rule "via to track clearance"
+(constraint hole_clearance (min 0.254mm))
+(condition "A.Type == 'via' && B.Type == 'track'"))
+
+(rule "via to via clearance (same nets)"
+(constraint hole_to_hole (min 0.254mm))
+(condition "A.Type == 'via' && B.Type == A.Type && A.Net == B.Net"))
+
+(rule "pad to pad clearance (with hole, different nets)"
+(constraint hole_to_hole (min 0.5mm))
+(condition "A.Type == 'pad' && B.Type == A.Type && A.Net != B.Net"))
+
+(rule "pad to pad clearance (without hole, different nets)"
+(constraint clearance (min 0.127mm))
+(condition "A.Type == 'Pad' && B.Type == 'Pad'"))
+
+(rule "NPTH to Track clearance"
+(constraint hole_clearance (min 0.254mm))
+(condition "A.Pad_Type == 'NPTH, mechanical' && B.Type == 'track'"))
+
+(rule "NPTH with copper around"
+(constraint hole_clearance (min 0.20mm))
+(condition "A.Pad_Type == 'NPTH, mechanical' && B.Type != 'track'"))
+
+(rule "PTH to Track clearance"
+(constraint hole_clearance (min 0.33mm))
+(condition "A.isPlated() && A.Type != 'Via' && B.Type == 'track'"))
+
+(rule "Pad to Track clearance"
+(constraint clearance (min 0.2mm))
+(condition "A.isPlated() && A.Type != 'Via' && B.Type == 'track'"))
+
+# ----------------------------------- Board Outlines (PICK ONE) -------------------------------------
+#Default Routed Edge Clearance
+(rule "Trace to Outline"
+(constraint edge_clearance (min 0.3mm))
+(condition "A.Type == 'track'"))
+
+#Special Clearance for V-Score Edges
+#(rule "Trace to V-Cut"
+#(constraint edge_clearance (min 0.4mm))
+#(condition "A.Type == 'track'"))
+
+# ----------------------------------- silkscreen --------------------------
+(rule "Minimum Text"
+(constraint text_thickness (min 0.15mm))
+(constraint text_height (min 0.8mm))
+(layer "?.Silkscreen"))
+
+(rule "Pad to Silkscreen"
+(constraint silk_clearance (min 0.15mm))
+(layer outer)
+(condition "A.Type == 'pad' && (B.Type == 'text' || B.Type == 'graphic')"))

rev2/5x6.kicad_prl

@@ -0,0 +1,130 @@
+{
+  "board": {
+    "active_layer": 2,
+    "active_layer_preset": "All Layers",
+    "auto_track_width": true,
+    "hidden_netclasses": [],
+    "hidden_nets": [],
+    "high_contrast_mode": 0,
+    "net_color_mode": 1,
+    "opacity": {
+      "images": 0.6,
+      "pads": 1.0,
+      "shapes": 1.0,
+      "tracks": 1.0,
+      "vias": 1.0,
+      "zones": 0.6
+    },
+    "selection_filter": {
+      "dimensions": true,
+      "footprints": true,
+      "graphics": true,
+      "keepouts": true,
+      "lockedItems": false,
+      "otherItems": true,
+      "pads": true,
+      "text": true,
+      "tracks": true,
+      "vias": true,
+      "zones": true
+    },
+    "visible_items": [
+      "vias",
+      "footprint_text",
+      "footprint_anchors",
+      "ratsnest",
+      "grid",
+      "footprints_front",
+      "footprints_back",
+      "footprint_values",
+      "footprint_references",
+      "tracks",
+      "drc_errors",
+      "drawing_sheet",
+      "bitmaps",
+      "pads",
+      "zones",
+      "drc_warnings",
+      "locked_item_shadows",
+      "conflict_shadows",
+      "shapes"
+    ],
+    "visible_layers": "ffffffff_ffffffff_ffffffff_ffffffff",
+    "zone_display_mode": 1
+  },
+  "git": {
+    "repo_type": "",
+    "repo_username": "",
+    "ssh_key": ""
+  },
+  "meta": {
+    "filename": "5x6.kicad_prl",
+    "version": 5
+  },
+  "net_inspector_panel": {
+    "col_hidden": [
+      false,
+      false,
+      false,
+      false,
+      false,
+      false,
+      false,
+      false,
+      false,
+      false
+    ],
+    "col_order": [
+      0,
+      1,
+      2,
+      3,
+      4,
+      5,
+      6,
+      7,
+      8,
+      9
+    ],
+    "col_widths": [
+      0,
+      0,
+      0,
+      0,
+      0,
+      0,
+      0,
+      0,
+      0,
+      0
+    ],
+    "custom_group_rules": [],
+    "expanded_rows": [],
+    "filter_by_net_name": true,
+    "filter_by_netclass": true,
+    "filter_text": "",
+    "group_by_constraint": false,
+    "group_by_netclass": false,
+    "show_unconnected_nets": false,
+    "show_zero_pad_nets": false,
+    "sort_ascending": true,
+    "sorting_column": 0
+  },
+  "open_jobsets": [],
+  "project": {
+    "files": []
+  },
+  "schematic": {
+    "selection_filter": {
+      "graphics": true,
+      "images": true,
+      "labels": true,
+      "lockedItems": false,
+      "otherItems": true,
+      "pins": true,
+      "symbols": true,
+      "text": true,
+      "wires": true
+    }
+  }
+}

rev2/5x6.kicad_pro

@@ -0,0 +1,643 @@
+{
+  "board": {
+    "3dviewports": [],
+    "design_settings": {
+      "defaults": {
+        "apply_defaults_to_fp_fields": false,
+        "apply_defaults_to_fp_shapes": false,
+        "apply_defaults_to_fp_text": false,
+        "board_outline_line_width": 0.05,
+        "copper_line_width": 0.2,
+        "copper_text_italic": false,
+        "copper_text_size_h": 1.5,
+        "copper_text_size_v": 1.5,
+        "copper_text_thickness": 0.3,
+        "copper_text_upright": false,
+        "courtyard_line_width": 0.05,
+        "dimension_precision": 4,
+        "dimension_units": 3,
+        "dimensions": {
+          "arrow_length": 1270000,
+          "extension_offset": 500000,
+          "keep_text_aligned": true,
+          "suppress_zeroes": true,
+          "text_position": 0,
+          "units_format": 0
+        },
+        "fab_line_width": 0.1,
+        "fab_text_italic": false,
+        "fab_text_size_h": 1.0,
+        "fab_text_size_v": 1.0,
+        "fab_text_thickness": 0.15,
+        "fab_text_upright": false,
+        "other_line_width": 0.1,
+        "other_text_italic": false,
+        "other_text_size_h": 1.0,
+        "other_text_size_v": 1.0,
+        "other_text_thickness": 0.15,
+        "other_text_upright": false,
+        "pads": {
+          "drill": 0.8,
+          "height": 1.27,
+          "width": 2.54
+        },
+        "silk_line_width": 0.1,
+        "silk_text_italic": false,
+        "silk_text_size_h": 1.0,
+        "silk_text_size_v": 1.0,
+        "silk_text_thickness": 0.1,
+        "silk_text_upright": false,
+        "zones": {
+          "min_clearance": 0.5
+        }
+      },
+      "diff_pair_dimensions": [
+        {
+          "gap": 0.0,
+          "via_gap": 0.0,
+          "width": 0.0
+        }
+      ],
+      "drc_exclusions": [],
+      "meta": {
+        "version": 2
+      },
+      "rule_severities": {
+        "annular_width": "error",
+        "clearance": "error",
+        "connection_width": "warning",
+        "copper_edge_clearance": "error",
+        "copper_sliver": "warning",
+        "courtyards_overlap": "error",
+        "creepage": "error",
+        "diff_pair_gap_out_of_range": "error",
+        "diff_pair_uncoupled_length_too_long": "error",
+        "drill_out_of_range": "error",
+        "duplicate_footprints": "warning",
+        "extra_footprint": "warning",
+        "footprint": "error",
+        "footprint_filters_mismatch": "ignore",
+        "footprint_symbol_mismatch": "warning",
+        "footprint_type_mismatch": "ignore",
+        "hole_clearance": "error",
+        "hole_to_hole": "warning",
+        "holes_co_located": "warning",
+        "invalid_outline": "error",
+        "isolated_copper": "warning",
+        "item_on_disabled_layer": "error",
+        "items_not_allowed": "error",
+        "length_out_of_range": "error",
+        "lib_footprint_issues": "warning",
+        "lib_footprint_mismatch": "warning",
+        "malformed_courtyard": "error",
+        "microvia_drill_out_of_range": "error",
+        "mirrored_text_on_front_layer": "warning",
+        "missing_courtyard": "ignore",
+        "missing_footprint": "warning",
+        "net_conflict": "warning",
+        "nonmirrored_text_on_back_layer": "warning",
+        "npth_inside_courtyard": "ignore",
+        "padstack": "warning",
+        "pth_inside_courtyard": "ignore",
+        "shorting_items": "error",
+        "silk_edge_clearance": "warning",
+        "silk_over_copper": "warning",
+        "silk_overlap": "warning",
+        "skew_out_of_range": "error",
+        "solder_mask_bridge": "error",
+        "starved_thermal": "error",
+        "text_height": "warning",
+        "text_on_edge_cuts": "error",
+        "text_thickness": "warning",
+        "through_hole_pad_without_hole": "error",
+        "too_many_vias": "error",
+        "track_angle": "error",
+        "track_dangling": "warning",
+        "track_segment_length": "error",
+        "track_width": "error",
+        "tracks_crossing": "error",
+        "unconnected_items": "error",
+        "unresolved_variable": "error",
+        "via_dangling": "warning",
+        "zones_intersect": "error"
+      },
+      "rules": {
+        "max_error": 0.005,
+        "min_clearance": 0.0,
+        "min_connection": 0.0,
+        "min_copper_edge_clearance": 0.5,
+        "min_groove_width": 0.0,
+        "min_hole_clearance": 0.25,
+        "min_hole_to_hole": 0.25,
+        "min_microvia_diameter": 0.2,
+        "min_microvia_drill": 0.1,
+        "min_resolved_spokes": 2,
+        "min_silk_clearance": 0.0,
+        "min_text_height": 0.8,
+        "min_text_thickness": 0.08,
+        "min_through_hole_diameter": 0.3,
+        "min_track_width": 0.0,
+        "min_via_annular_width": 0.1,
+        "min_via_diameter": 0.5,
+        "solder_mask_to_copper_clearance": 0.005,
+        "use_height_for_length_calcs": true
+      },
+      "teardrop_options": [
+        {
+          "td_onpthpad": true,
+          "td_onroundshapesonly": false,
+          "td_onsmdpad": true,
+          "td_ontrackend": false,
+          "td_onvia": true
+        }
+      ],
+      "teardrop_parameters": [
+        {
+          "td_allow_use_two_tracks": true,
+          "td_curve_segcount": 0,
+          "td_height_ratio": 1.0,
+          "td_length_ratio": 0.5,
+          "td_maxheight": 2.0,
+          "td_maxlen": 1.0,
+          "td_on_pad_in_zone": false,
+          "td_target_name": "td_round_shape",
+          "td_width_to_size_filter_ratio": 0.9
+        },
+        {
+          "td_allow_use_two_tracks": true,
+          "td_curve_segcount": 0,
+          "td_height_ratio": 1.0,
+          "td_length_ratio": 0.5,
+          "td_maxheight": 2.0,
+          "td_maxlen": 1.0,
+          "td_on_pad_in_zone": false,
+          "td_target_name": "td_rect_shape",
+          "td_width_to_size_filter_ratio": 0.9
+        },
+        {
+          "td_allow_use_two_tracks": true,
+          "td_curve_segcount": 0,
+          "td_height_ratio": 1.0,
+          "td_length_ratio": 0.5,
+          "td_maxheight": 2.0,
+          "td_maxlen": 1.0,
+          "td_on_pad_in_zone": false,
+          "td_target_name": "td_track_end",
+          "td_width_to_size_filter_ratio": 0.9
+        }
+      ],
+      "track_widths": [
+        0.0
+      ],
+      "tuning_pattern_settings": {
+        "diff_pair_defaults": {
+          "corner_radius_percentage": 80,
+          "corner_style": 1,
+          "max_amplitude": 1.0,
+          "min_amplitude": 0.2,
+          "single_sided": false,
+          "spacing": 1.0
+        },
+        "diff_pair_skew_defaults": {
+          "corner_radius_percentage": 80,
+          "corner_style": 1,
+          "max_amplitude": 1.0,
+          "min_amplitude": 0.2,
+          "single_sided": false,
+          "spacing": 0.6
+        },
+        "single_track_defaults": {
+          "corner_radius_percentage": 80,
+          "corner_style": 1,
+          "max_amplitude": 1.0,
+          "min_amplitude": 0.2,
+          "single_sided": false,
+          "spacing": 0.6
+        }
+      },
+      "via_dimensions": [
+        {
+          "diameter": 0.0,
+          "drill": 0.0
+        }
+      ],
+      "zones_allow_external_fillets": false
+    },
+    "ipc2581": {
+      "dist": "",
+      "distpn": "",
+      "internal_id": "",
+      "mfg": "",
+      "mpn": ""
+    },
+    "layer_pairs": [],
+    "layer_presets": [],
+    "viewports": []
+  },
+  "boards": [],
+  "cvpcb": {
+    "equivalence_files": []
+  },
+  "erc": {
+    "erc_exclusions": [],
+    "meta": {
+      "version": 0
+    },
+    "pin_map": [
+      [
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        1,
+        0,
+        0,
+        0,
+        0,
+        2
+      ],
+      [
+        0,
+        2,
+        0,
+        1,
+        0,
+        0,
+        1,
+        0,
+        2,
+        2,
+        2,
+        2
+      ],
+      [
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        1,
+        0,
+        1,
+        0,
+        1,
+        2
+      ],
+      [
+        0,
+        1,
+        0,
+        0,
+        0,
+        0,
+        1,
+        1,
+        2,
+        1,
+        1,
+        2
+      ],
+      [
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        1,
+        0,
+        0,
+        0,
+        0,
+        2
+      ],
+      [
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        2
+      ],
+      [
+        1,
+        1,
+        1,
+        1,
+        1,
+        0,
+        1,
+        1,
+        1,
+        1,
+        1,
+        2
+      ],
+      [
+        0,
+        0,
+        0,
+        1,
+        0,
+        0,
+        1,
+        0,
+        0,
+        0,
+        0,
+        2
+      ],
+      [
+        0,
+        2,
+        1,
+        2,
+        0,
+        0,
+        1,
+        0,
+        2,
+        2,
+        2,
+        2
+      ],
+      [
+        0,
+        2,
+        0,
+        1,
+        0,
+        0,
+        1,
+        0,
+        2,
+        0,
+        0,
+        2
+      ],
+      [
+        0,
+        2,
+        1,
+        1,
+        0,
+        0,
+        1,
+        0,
+        2,
+        0,
+        0,
+        2
+      ],
+      [
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2
+      ]
+    ],
+    "rule_severities": {
+      "bus_definition_conflict": "error",
+      "bus_entry_needed": "error",
+      "bus_to_bus_conflict": "error",
+      "bus_to_net_conflict": "error",
+      "different_unit_footprint": "error",
+      "different_unit_net": "error",
+      "duplicate_reference": "error",
+      "duplicate_sheet_names": "error",
+      "endpoint_off_grid": "warning",
+      "extra_units": "error",
+      "footprint_filter": "ignore",
+      "footprint_link_issues": "warning",
+      "four_way_junction": "ignore",
+      "global_label_dangling": "warning",
+      "hier_label_mismatch": "error",
+      "label_dangling": "error",
+      "label_multiple_wires": "warning",
+      "lib_symbol_issues": "warning",
+      "lib_symbol_mismatch": "warning",
+      "missing_bidi_pin": "warning",
+      "missing_input_pin": "warning",
+      "missing_power_pin": "error",
+      "missing_unit": "warning",
+      "multiple_net_names": "warning",
+      "net_not_bus_member": "warning",
+      "no_connect_connected": "warning",
+      "no_connect_dangling": "warning",
+      "pin_not_connected": "error",
+      "pin_not_driven": "error",
+      "pin_to_pin": "warning",
+      "power_pin_not_driven": "error",
+      "same_local_global_label": "warning",
+      "similar_label_and_power": "warning",
+      "similar_labels": "warning",
+      "similar_power": "warning",
+      "simulation_model_issue": "ignore",
+      "single_global_label": "ignore",
+      "unannotated": "error",
+      "unconnected_wire_endpoint": "warning",
+      "unit_value_mismatch": "error",
+      "unresolved_variable": "error",
+      "wire_dangling": "error"
+    }
+  },
+  "libraries": {
+    "pinned_footprint_libs": [],
+    "pinned_symbol_libs": []
+  },
+  "meta": {
+    "filename": "5x6.kicad_pro",
+    "version": 3
+  },
+  "net_settings": {
+    "classes": [
+      {
+        "bus_width": 12,
+        "clearance": 0.2,
+        "diff_pair_gap": 0.25,
+        "diff_pair_via_gap": 0.25,
+        "diff_pair_width": 0.2,
+        "line_style": 0,
+        "microvia_diameter": 0.3,
+        "microvia_drill": 0.1,
+        "name": "Default",
+        "pcb_color": "rgba(0, 0, 0, 0.000)",
+        "priority": 2147483647,
+        "schematic_color": "rgba(0, 0, 0, 0.000)",
+        "track_width": 0.2,
+        "via_diameter": 0.6,
+        "via_drill": 0.3,
+        "wire_width": 6
+      }
+    ],
+    "meta": {
+      "version": 4
+    },
+    "net_colors": null,
+    "netclass_assignments": null,
+    "netclass_patterns": []
+  },
+  "pcbnew": {
+    "last_paths": {
+      "gencad": "",
+      "idf": "",
+      "netlist": "",
+      "plot": "gerbers/",
+      "pos_files": "",
+      "specctra_dsn": "",
+      "step": "",
+      "svg": "",
+      "vrml": ""
+    },
+    "page_layout_descr_file": ""
+  },
+  "schematic": {
+    "annotate_start_num": 0,
+    "bom_export_filename": "${PROJECTNAME}.csv",
+    "bom_fmt_presets": [],
+    "bom_fmt_settings": {
+      "field_delimiter": ",",
+      "keep_line_breaks": false,
+      "keep_tabs": false,
+      "name": "CSV",
+      "ref_delimiter": ",",
+      "ref_range_delimiter": "",
+      "string_delimiter": "\""
+    },
+    "bom_presets": [],
+    "bom_settings": {
+      "exclude_dnp": false,
+      "fields_ordered": [
+        {
+          "group_by": false,
+          "label": "Reference",
+          "name": "Reference",
+          "show": true
+        },
+        {
+          "group_by": true,
+          "label": "Value",
+          "name": "Value",
+          "show": true
+        },
+        {
+          "group_by": true,
+          "label": "Footprint",
+          "name": "Footprint",
+          "show": true
+        },
+        {
+          "group_by": false,
+          "label": "Datasheet",
+          "name": "Datasheet",
+          "show": true
+        },
+        {
+          "group_by": false,
+          "label": "Description",
+          "name": "Description",
+          "show": false
+        },
+        {
+          "group_by": false,
+          "label": "Qty",
+          "name": "${QUANTITY}",
+          "show": true
+        },
+        {
+          "group_by": false,
+          "label": "#",
+          "name": "${ITEM_NUMBER}",
+          "show": false
+        },
+        {
+          "group_by": true,
+          "label": "DNP",
+          "name": "${DNP}",
+          "show": true
+        },
+        {
+          "group_by": true,
+          "label": "Exclude from BOM",
+          "name": "${EXCLUDE_FROM_BOM}",
+          "show": true
+        },
+        {
+          "group_by": true,
+          "label": "Exclude from Board",
+          "name": "${EXCLUDE_FROM_BOARD}",
+          "show": true
+        }
+      ],
+      "filter_string": "",
+      "group_symbols": true,
+      "include_excluded_from_bom": true,
+      "name": "",
+      "sort_asc": true,
+      "sort_field": "Reference"
+    },
+    "connection_grid_size": 50.0,
+    "drawing": {
+      "dashed_lines_dash_length_ratio": 12.0,
+      "dashed_lines_gap_length_ratio": 3.0,
+      "default_line_thickness": 6.0,
+      "default_text_size": 50.0,
+      "field_names": [],
+      "intersheets_ref_own_page": false,
+      "intersheets_ref_prefix": "",
+      "intersheets_ref_short": false,
+      "intersheets_ref_show": false,
+      "intersheets_ref_suffix": "",
+      "junction_size_choice": 3,
+      "label_size_ratio": 0.375,
+      "operating_point_overlay_i_precision": 3,
+      "operating_point_overlay_i_range": "~A",
+      "operating_point_overlay_v_precision": 3,
+      "operating_point_overlay_v_range": "~V",
+      "overbar_offset_ratio": 1.23,
+      "pin_symbol_size": 25.0,
+      "text_offset_ratio": 0.15
+    },
+    "legacy_lib_dir": "",
+    "legacy_lib_list": [],
+    "meta": {
+      "version": 1
+    },
+    "net_format_name": "",
+    "page_layout_descr_file": "",
+    "plot_directory": "",
+    "space_save_all_events": true,
+    "spice_current_sheet_as_root": false,
+    "spice_external_command": "spice \"%I\"",
+    "spice_model_current_sheet_as_root": true,
+    "spice_save_all_currents": false,
+    "spice_save_all_dissipations": false,
+    "spice_save_all_voltages": false,
+    "subpart_first_id": 65,
+    "subpart_id_separator": 0
+  },
+  "sheets": [
+    [
+      "4dfe5325-5a71-454a-9f6c-c1dfa20e8cd5",
+      "Root"
+    ]
+  ],
+  "text_variables": {}
+}

rev2/README.md

@@ -0,0 +1,25 @@
+# 5x6 split keyboard
+
+I have been using the planck keyboard for 10 years and i find that i usually have to do awkward finger gymnastics to do shortcutr including numbers. This is an attempt at making a keyboard that is easier to use in those situations.
+
+I choose to not have a thumb cluster since i don't find that very ergonomic to me.
+
+## PCB
+
+### Front
+
+![images/front-pcb.png](images/front-pcb.png)
+
+### Back
+
+![images/back-pcb.png](images/back-pcb.png)
+
+## 3D models
+
+### Front dampener
+
+This piece sits between the PCB and the switches to dampen the sound of the switches.
+
+`3d-models/front-dampener.stl`
+
+![images/front-dampener.png](images/front-dampener.png)

rev2/electrokit.bak

@@ -0,0 +1,128 @@
+(kicad_symbol_lib
+	(version 20241209)
+	(generator "kicad_symbol_editor")
+	(generator_version "9.0")
+	(symbol "4ucon_trrs_3.5_smd"
+		(exclude_from_sim no)
+		(in_bom yes)
+		(on_board yes)
+		(property "Reference" "U"
+			(at 0 0 0)
+			(effects
+				(font
+					(size 1.27 1.27)
+				)
+			)
+		)
+		(property "Value" ""
+			(at 0 0 0)
+			(effects
+				(font
+					(size 1.27 1.27)
+				)
+			)
+		)
+		(property "Footprint" ""
+			(at 0 0 0)
+			(effects
+				(font
+					(size 1.27 1.27)
+				)
+				(hide yes)
+			)
+		)
+		(property "Datasheet" ""
+			(at 0 0 0)
+			(effects
+				(font
+					(size 1.27 1.27)
+				)
+				(hide yes)
+			)
+		)
+		(property "Description" ""
+			(at 0 0 0)
+			(effects
+				(font
+					(size 1.27 1.27)
+				)
+				(hide yes)
+			)
+		)
+		(symbol "4ucon_trrs_3.5_smd_1_1"
+			(pin bidirectional line
+				(at 0 11.43 270)
+				(length 2.54)
+				(name "Ring_2"
+					(effects
+						(font
+							(size 1.27 1.27)
+						)
+					)
+				)
+				(number "4"
+					(effects
+						(font
+							(size 1.27 1.27)
+						)
+					)
+				)
+			)
+			(pin bidirectional line
+				(at 2.54 11.43 270)
+				(length 2.54)
+				(name "Ring_1"
+					(effects
+						(font
+							(size 1.27 1.27)
+						)
+					)
+				)
+				(number "3"
+					(effects
+						(font
+							(size 1.27 1.27)
+						)
+					)
+				)
+			)
+			(pin bidirectional line
+				(at 5.08 11.43 270)
+				(length 2.54)
+				(name "Tip"
+					(effects
+						(font
+							(size 1.27 1.27)
+						)
+					)
+				)
+				(number "2"
+					(effects
+						(font
+							(size 1.27 1.27)
+						)
+					)
+				)
+			)
+			(pin bidirectional line
+				(at 5.08 -11.43 90)
+				(length 2.54)
+				(name "Sleeve"
+					(effects
+						(font
+							(size 1.27 1.27)
+						)
+					)
+				)
+				(number "1"
+					(effects
+						(font
+							(size 1.27 1.27)
+						)
+					)
+				)
+			)
+		)
+		(embedded_fonts no)
+	)
+)

rev2/electrokit.kicad_sym

@@ -0,0 +1,142 @@
+(kicad_symbol_lib
+	(version 20241209)
+	(generator "kicad_symbol_editor")
+	(generator_version "9.0")
+	(symbol "4ucon_trrs_3.5_smd"
+		(exclude_from_sim no)
+		(in_bom yes)
+		(on_board yes)
+		(property "Reference" "U"
+			(at 0 0 0)
+			(effects
+				(font
+					(size 1.27 1.27)
+				)
+			)
+		)
+		(property "Value" ""
+			(at 0 0 0)
+			(effects
+				(font
+					(size 1.27 1.27)
+				)
+			)
+		)
+		(property "Footprint" ""
+			(at 0 0 0)
+			(effects
+				(font
+					(size 1.27 1.27)
+				)
+				(hide yes)
+			)
+		)
+		(property "Datasheet" ""
+			(at 0 0 0)
+			(effects
+				(font
+					(size 1.27 1.27)
+				)
+				(hide yes)
+			)
+		)
+		(property "Description" ""
+			(at 0 0 0)
+			(effects
+				(font
+					(size 1.27 1.27)
+				)
+				(hide yes)
+			)
+		)
+		(symbol "4ucon_trrs_3.5_smd_0_1"
+			(polyline
+				(pts
+					(xy -5.08 8.89) (xy 10.16 8.89) (xy 10.16 -8.89) (xy -5.08 -8.89) (xy -5.08 8.89)
+				)
+				(stroke
+					(width 0)
+					(type default)
+				)
+				(fill
+					(type none)
+				)
+			)
+		)
+		(symbol "4ucon_trrs_3.5_smd_1_1"
+			(pin bidirectional line
+				(at 0 11.43 270)
+				(length 2.54)
+				(name "Ring_2"
+					(effects
+						(font
+							(size 1.27 1.27)
+						)
+					)
+				)
+				(number "4"
+					(effects
+						(font
+							(size 1.27 1.27)
+						)
+					)
+				)
+			)
+			(pin bidirectional line
+				(at 2.54 11.43 270)
+				(length 2.54)
+				(name "Ring_1"
+					(effects
+						(font
+							(size 1.27 1.27)
+						)
+					)
+				)
+				(number "3"
+					(effects
+						(font
+							(size 1.27 1.27)
+						)
+					)
+				)
+			)
+			(pin bidirectional line
+				(at 5.08 11.43 270)
+				(length 2.54)
+				(name "Tip"
+					(effects
+						(font
+							(size 1.27 1.27)
+						)
+					)
+				)
+				(number "2"
+					(effects
+						(font
+							(size 1.27 1.27)
+						)
+					)
+				)
+			)
+			(pin bidirectional line
+				(at 5.08 -11.43 90)
+				(length 2.54)
+				(name "Sleeve"
+					(effects
+						(font
+							(size 1.27 1.27)
+						)
+					)
+				)
+				(number "1"
+					(effects
+						(font
+							(size 1.27 1.27)
+						)
+					)
+				)
+			)
+		)
+		(embedded_fonts no)
+	)
+)

rev2/electrokit.pretty/4ucon trrs 3.5 smd back.kicad_mod

@@ -0,0 +1,175 @@
+(footprint "4ucon trrs 3.5 smd back"
+	(version 20241229)
+	(generator "pcbnew")
+	(generator_version "9.0")
+	(layer "F.Cu")
+	(property "Reference" "REF**"
+		(at 13.25 0 270)
+		(unlocked yes)
+		(layer "B.SilkS")
+		(uuid "9a3c8985-848b-4546-8179-2df3a6bee361")
+		(effects
+			(font
+				(size 1 1)
+				(thickness 0.15)
+			)
+		)
+	)
+	(property "Value" "4ucon trrs 3.5 smd back"
+		(at 5.75 4.5 0)
+		(unlocked yes)
+		(layer "B.Fab")
+		(uuid "ddf1ff6a-f151-44f0-b084-fbbaf8c57f3c")
+		(effects
+			(font
+				(size 1 1)
+				(thickness 0.15)
+			)
+			(justify mirror)
+		)
+	)
+	(property "Datasheet" ""
+		(at 0 0 0)
+		(unlocked yes)
+		(layer "B.Fab")
+		(hide yes)
+		(uuid "06dee8a1-2bdb-4b44-91db-35ee996c6881")
+		(effects
+			(font
+				(size 1 1)
+				(thickness 0.15)
+			)
+			(justify mirror)
+		)
+	)
+	(property "Description" ""
+		(at 0 0 0)
+		(unlocked yes)
+		(layer "B.Fab")
+		(hide yes)
+		(uuid "4412d3d3-7459-40b2-87e1-4f56661dd9cd")
+		(effects
+			(font
+				(size 1 1)
+				(thickness 0.15)
+			)
+			(justify mirror)
+		)
+	)
+	(attr smd)
+	(fp_line
+		(start -1.5 -1.5)
+		(end -1.5 1.5)
+		(stroke
+			(width 0.1)
+			(type default)
+		)
+		(layer "Dwgs.User")
+		(uuid "858d1008-120f-43d7-b4e8-4eee1e3497aa")
+	)
+	(fp_line
+		(start -1.5 1.5)
+		(end 0 1.5)
+		(stroke
+			(width 0.1)
+			(type default)
+		)
+		(layer "Dwgs.User")
+		(uuid "e55a4c39-b659-4e88-92a8-1a8c420ca38d")
+	)
+	(fp_line
+		(start 0 -2.75)
+		(end 0 2.75)
+		(stroke
+			(width 0.1)
+			(type default)
+		)
+		(layer "Dwgs.User")
+		(uuid "80036ca4-f861-475d-b8d9-da6ef060fe64")
+	)
+	(fp_line
+		(start 0 -2.75)
+		(end 12 -2.75)
+		(stroke
+			(width 0.1)
+			(type default)
+		)
+		(layer "Dwgs.User")
+		(uuid "ce938213-07db-4acd-80a8-bcccff18a3db")
+	)
+	(fp_line
+		(start 0 -1.5)
+		(end -1.5 -1.5)
+		(stroke
+			(width 0.1)
+			(type default)
+		)
+		(layer "Dwgs.User")
+		(uuid "cb8e1139-8ce8-4ef8-b8da-bbed93331d4e")
+	)
+	(fp_line
+		(start 0 2.75)
+		(end 12 2.75)
+		(stroke
+			(width 0.1)
+			(type default)
+		)
+		(layer "Dwgs.User")
+		(uuid "8bfe34e1-66b2-426a-b5fb-5e049a74ff8c")
+	)
+	(fp_line
+		(start 12 -2.75)
+		(end 12 2.75)
+		(stroke
+			(width 0.1)
+			(type default)
+		)
+		(layer "Dwgs.User")
+		(uuid "72e6a457-ee04-4ca1-bf86-bda4328410ad")
+	)
+	(fp_text user "${REFERENCE}"
+		(at 6 -1 0)
+		(unlocked yes)
+		(layer "F.Fab")
+		(uuid "b7f086e3-a63d-4bad-9e0f-d7d9f0823edc")
+		(effects
+			(font
+				(size 1 1)
+				(thickness 0.15)
+			)
+		)
+	)
+	(pad "1" smd roundrect
+		(at 11.3 -3 90)
+		(size 2 1.3)
+		(layers "B.Cu" "B.Mask" "B.Paste")
+		(roundrect_rratio 0.15)
+		(thermal_bridge_angle 45)
+		(uuid "5debc1ec-5f7b-4e21-80ea-66c6aadedb09")
+	)
+	(pad "2" smd roundrect
+		(at 10.2 3 90)
+		(size 2 1.3)
+		(layers "B.Cu" "B.Mask" "B.Paste")
+		(roundrect_rratio 0.15)
+		(thermal_bridge_angle 45)
+		(uuid "cf0211a7-5d1c-4e22-bc65-4528502bd690")
+	)
+	(pad "3" smd roundrect
+		(at 6.2 3 90)
+		(size 2 1.3)
+		(layers "B.Cu" "B.Mask" "B.Paste")
+		(roundrect_rratio 0.15)
+		(thermal_bridge_angle 45)
+		(uuid "c9b84353-b2d1-4c00-b361-90766c754df2")
+	)
+	(pad "4" smd roundrect
+		(at 3.2 3 90)
+		(size 2 1.3)
+		(layers "B.Cu" "B.Mask" "B.Paste")
+		(roundrect_rratio 0.15)
+		(thermal_bridge_angle 45)
+		(uuid "ebc06903-a71d-4357-8ac1-58adf5e9d45d")
+	)
+	(embedded_fonts no)
+)

rev2/electrokit.pretty/4ucon trrs 3.5 smd.kicad_mod

@@ -0,0 +1,172 @@
+(footprint "4ucon trrs 3.5 smd"
+	(version 20241229)
+	(generator "pcbnew")
+	(generator_version "9.0")
+	(layer "F.Cu")
+	(property "Reference" "REF**"
+		(at 13.25 0 270)
+		(unlocked yes)
+		(layer "F.SilkS")
+		(uuid "9a3c8985-848b-4546-8179-2df3a6bee361")
+		(effects
+			(font
+				(size 1 1)
+				(thickness 0.1)
+			)
+		)
+	)
+	(property "Value" "4ucon trrs 3.5 smd"
+		(at 5.75 4.5 0)
+		(unlocked yes)
+		(layer "F.Fab")
+		(uuid "ddf1ff6a-f151-44f0-b084-fbbaf8c57f3c")
+		(effects
+			(font
+				(size 1 1)
+				(thickness 0.15)
+			)
+		)
+	)
+	(property "Datasheet" ""
+		(at 0 0 0)
+		(unlocked yes)
+		(layer "F.Fab")
+		(hide yes)
+		(uuid "06dee8a1-2bdb-4b44-91db-35ee996c6881")
+		(effects
+			(font
+				(size 1 1)
+				(thickness 0.15)
+			)
+		)
+	)
+	(property "Description" ""
+		(at 0 0 0)
+		(unlocked yes)
+		(layer "F.Fab")
+		(hide yes)
+		(uuid "4412d3d3-7459-40b2-87e1-4f56661dd9cd")
+		(effects
+			(font
+				(size 1 1)
+				(thickness 0.15)
+			)
+		)
+	)
+	(attr smd)
+	(fp_line
+		(start -1.5 -1.5)
+		(end -1.5 1.5)
+		(stroke
+			(width 0.1)
+			(type default)
+		)
+		(layer "Dwgs.User")
+		(uuid "858d1008-120f-43d7-b4e8-4eee1e3497aa")
+	)
+	(fp_line
+		(start -1.5 1.5)
+		(end 0 1.5)
+		(stroke
+			(width 0.1)
+			(type default)
+		)
+		(layer "Dwgs.User")
+		(uuid "e55a4c39-b659-4e88-92a8-1a8c420ca38d")
+	)
+	(fp_line
+		(start 0 -2.75)
+		(end 0 2.75)
+		(stroke
+			(width 0.1)
+			(type default)
+		)
+		(layer "Dwgs.User")
+		(uuid "80036ca4-f861-475d-b8d9-da6ef060fe64")
+	)
+	(fp_line
+		(start 0 -2.75)
+		(end 12 -2.75)
+		(stroke
+			(width 0.1)
+			(type default)
+		)
+		(layer "Dwgs.User")
+		(uuid "ce938213-07db-4acd-80a8-bcccff18a3db")
+	)
+	(fp_line
+		(start 0 -1.5)
+		(end -1.5 -1.5)
+		(stroke
+			(width 0.1)
+			(type default)
+		)
+		(layer "Dwgs.User")
+		(uuid "cb8e1139-8ce8-4ef8-b8da-bbed93331d4e")
+	)
+	(fp_line
+		(start 0 2.75)
+		(end 12 2.75)
+		(stroke
+			(width 0.1)
+			(type default)
+		)
+		(layer "Dwgs.User")
+		(uuid "8bfe34e1-66b2-426a-b5fb-5e049a74ff8c")
+	)
+	(fp_line
+		(start 12 -2.75)
+		(end 12 2.75)
+		(stroke
+			(width 0.1)
+			(type default)
+		)
+		(layer "Dwgs.User")
+		(uuid "72e6a457-ee04-4ca1-bf86-bda4328410ad")
+	)
+	(fp_text user "${REFERENCE}"
+		(at 6 -1 0)
+		(unlocked yes)
+		(layer "F.Fab")
+		(uuid "b7f086e3-a63d-4bad-9e0f-d7d9f0823edc")
+		(effects
+			(font
+				(size 1 1)
+				(thickness 0.15)
+			)
+		)
+	)
+	(pad "1" smd roundrect
+		(at 11.3 3 90)
+		(size 2 1.3)
+		(layers "F.Cu" "F.Mask" "F.Paste")
+		(roundrect_rratio 0.15)
+		(thermal_bridge_angle 45)
+		(uuid "4554f5c4-78da-428e-ae08-7d93cf3e2b11")
+	)
+	(pad "2" smd roundrect
+		(at 10.2 -3 90)
+		(size 2 1.3)
+		(layers "F.Cu" "F.Mask" "F.Paste")
+		(roundrect_rratio 0.15)
+		(thermal_bridge_angle 45)
+		(uuid "5473c321-c275-4781-a646-bf483402c9a3")
+	)
+	(pad "3" smd roundrect
+		(at 6.2 -3 90)
+		(size 2 1.3)
+		(layers "F.Cu" "F.Mask" "F.Paste")
+		(roundrect_rratio 0.15)
+		(thermal_bridge_angle 45)
+		(uuid "8d01b7fa-137f-483f-85e9-deba4ac2960d")
+	)
+	(pad "4" smd roundrect
+		(at 3.2 -3 90)
+		(size 2 1.3)
+		(layers "F.Cu" "F.Mask" "F.Paste")
+		(roundrect_rratio 0.15)
+		(thermal_bridge_angle 45)
+		(uuid "5debc1ec-5f7b-4e21-80ea-66c6aadedb09")
+	)
+	(embedded_fonts no)
+)

rev2/fabrication-toolkit-options.json

@@ -0,0 +1 @@
+{"EXTRA_LAYERS": "", "ALL_ACTIVE_LAYERS": false, "EXTEND_EDGE_CUT": false, "ALTERNATIVE_EDGE_CUT": false, "AUTO TRANSLATE": true, "AUTO FILL": true, "EXCLUDE DNP": false}

rev2/fp-lib-table

@@ -0,0 +1,4 @@
+(fp_lib_table
+  (version 7)
+  (lib (name "electrokit")(type "KiCad")(uri "${KIPRJMOD}/electrokit.pretty")(options "")(descr ""))
+)

rev2/sym-lib-table

@@ -0,0 +1,4 @@
+(sym_lib_table
+  (version 7)
+  (lib (name "electrokit")(type "KiCad")(uri "${KIPRJMOD}/electrokit.kicad_sym")(options "")(descr ""))
+)