diff --git a/rev2/3d-models/bot-dampener-left.stl b/rev2/3d-models/bot-dampener-left.stl
new file mode 100644
index 0000000..02fe913
Binary files /dev/null and b/rev2/3d-models/bot-dampener-left.stl differ
diff --git a/rev2/3d-models/bot-dampener-right.stl b/rev2/3d-models/bot-dampener-right.stl
new file mode 100644
index 0000000..d7f7ab5
Binary files /dev/null and b/rev2/3d-models/bot-dampener-right.stl differ
diff --git a/rev2/3d-models/case-left.stl b/rev2/3d-models/case-left.stl
new file mode 100644
index 0000000..115545b
Binary files /dev/null and b/rev2/3d-models/case-left.stl differ
diff --git a/rev2/3d-models/frame-left.stl b/rev2/3d-models/frame-left.stl
new file mode 100644
index 0000000..06b856b
Binary files /dev/null and b/rev2/3d-models/frame-left.stl differ
diff --git a/rev2/3d-models/right-and-left-top-dampeners.stl b/rev2/3d-models/right-and-left-top-dampeners.stl
deleted file mode 100644
index c25816d..0000000
Binary files a/rev2/3d-models/right-and-left-top-dampeners.stl and /dev/null differ
diff --git a/rev2/3d-models/top-dampener-left.stl b/rev2/3d-models/top-dampener-left.stl
new file mode 100644
index 0000000..53c7d5b
Binary files /dev/null and b/rev2/3d-models/top-dampener-left.stl differ
diff --git a/rev2/3d-models/top-dampener-right.stl b/rev2/3d-models/top-dampener-right.stl
new file mode 100644
index 0000000..9512161
Binary files /dev/null and b/rev2/3d-models/top-dampener-right.stl differ
diff --git a/rev2/3d-models/top-dampener.scad b/rev2/3d-models/top-dampener.scad
index 9c61661..c6b4928 100644
--- a/rev2/3d-models/top-dampener.scad
+++ b/rev2/3d-models/top-dampener.scad
@@ -146,12 +146,7 @@ rightTopDampener();
                 cylinder(h=$magnetHeight, r=$magnetRadius);
         }
     }
-module case(){
-    // Then adjust the shim, aux and pico.
-    // Last add magnets, don't forget the clearance.
-    $baseHeight = 7.6;
-        
-
+        $baseHeight = 7.6;
     module aux(){
         $topLeftOfPcbToCenterOfAux = 15.4;
         $measurementPcbPlaneToCenterOfAux = 2.8;
@@ -210,6 +205,13 @@ module case(){
                 ]);
         }
     }
+module case(){
+    // Then adjust the shim, aux and pico.
+    // Last add magnets, don't forget the clearance.
+
+        
+
+
     module shim(){
         $shimPoints = [
             [0 - $shellWidth / 2, - $baseHeight],
@@ -327,8 +329,19 @@ module lid(){
         magnets();
 }
 }
+module botDampener(){
+    difference(){
+        topDampeners();
+        aux();
+        translate([0,0,2])
+            pico();
+    }
+}
 
+mirror([1,0,0]){
     *%pcb();
-    %topDampeners();
-    case();
+    *topDampeners();
+    *botDampener();
+    *case();
     lid();
+}
\ No newline at end of file