Added mac variant of portuguese keymap extras (#11260)

* Added mac variant of portuguese keymap

This keymap is very similar to the existing portuguese keymap, but
some symbols are moved around.

Apply suggestions from code review

Corrected whitespace and implemented some suggested changes.

Co-authored-by: Ryan <fauxpark@gmail.com>

Converted some spaces to nbsp

Added sendstring ISO version

* Apply suggestions from code review

Added suggestions from code review

Co-authored-by: Ryan <fauxpark@gmail.com>

* Replaced space with nbsp

* Corrected 2 chars in ascii_to_shift_lut

{ and } require shift

Co-authored-by: Ryan <fauxpark@gmail.com>

docs/driver_installation_zadig.md

@@ -14,16 +14,11 @@ Some keyboards may have specific instructions for entering the bootloader. For e
 To put a device in bootloader mode with USBaspLoader, tap the `RESET` button while holding down the `BOOT` button.
 Alternatively, hold `BOOT` while inserting the USB cable.
 
-Zadig will automatically detect the bootloader device. You may sometimes need to check **Options → List All Devices**.
-
- - For keyboards with Atmel AVR MCUs, the bootloader will be named something similar to `ATm32U4DFU`, and have a Vendor ID of `03EB`.
- - USBasp bootloaders will appear as `USBasp`, with a VID/PID of `16C0:05DC`.
- - AVR keyboards flashed with the QMK-DFU bootloader will be named `<keyboard name> Bootloader` and will also have the VID `03EB`.
- - For most ARM keyboards, it will be called `STM32 BOOTLOADER`, and have a VID/PID of `0483:DF11`.
+Zadig should automatically detect the bootloader device, but you may sometimes need to check **Options → List All Devices** and select the device from the dropdown instead.
 
 !> If Zadig lists one or more devices with the `HidUsb` driver, your keyboard is probably not in bootloader mode. The arrow will be colored orange and you will be asked to confirm modifying a system driver. **Do not** proceed if this is the case!
 
-If the arrow appears green, select the driver, and click **Install Driver**. The `libusb-win32` driver will usually work for AVR, and `WinUSB` for ARM, but if you still cannot flash the board, try installing a different driver from the list. USBAspLoader devices must use the `libusbK` driver.
+If the arrow appears green, select the driver, and click **Install Driver**. See the [list of known bootloaders](#list-of-known-bootloaders) for the correct driver to install.
 
 ![Zadig with a bootloader driver correctly installed](https://i.imgur.com/b8VgXzx.png)
 
@@ -43,6 +38,40 @@ Right-click it and hit **Uninstall device**. Make sure to tick **Delete the driv
 
 ![The Device Uninstall dialog, with the "delete driver" checkbox ticked](https://i.imgur.com/aEs2RuA.png)
 
-Click **Action → Scan for hardware changes**. At this point, you should be able to type again. Double check in Zadig that the keyboard device(s) are using the `HidUsb` driver. If so, you're all done, and your board should be functional again!
+Click **Action → Scan for hardware changes**. At this point, you should be able to type again. Double check in Zadig that the keyboard device(s) are using the `HidUsb` driver. If so, you're all done, and your board should be functional again! Otherwise, repeat the process until Zadig reports the correct driver.
 
 ?> A full reboot of your computer may sometimes be necessary at this point, to get Windows to pick up the new driver.
+
+## List of Known Bootloaders
+
+This is a list of known bootloader devices and their USB vendor and product IDs, as well as the correct driver to assign for flashing with QMK. Note that the usbser and HidUsb drivers are built in to Windows, and cannot be assigned with Zadig - if your device has an incorrect driver, you must use the Device Manager to uninstall it as described in the previous section.
+
+The device name here is the name that appears in Zadig, and may not be what the Device Manager or QMK Toolbox displays.
+
+|Bootloader   |Device Name                   |VID/PID       |Driver |
+|-------------|------------------------------|--------------|-------|
+|`atmel-dfu`  |ATmega16u2 DFU                |`03EB:2FEF`   |libusb0|
+|`atmel-dfu`  |ATmega32U2 DFU                |`03EB:2FF0`   |libusb0|
+|`atmel-dfu`  |ATm16U4 DFU V1.0.2            |`03EB:2FF3`   |libusb0|
+|`atmel-dfu`  |ATm32U4DFU                    |`03EB:2FF4`   |libusb0|
+|`atmel-dfu`  |*none* (AT90USB64)            |`03EB:2FF9`   |libusb0|
+|`atmel-dfu`  |AT90USB128 DFU                |`03EB:2FFB`   |libusb0|
+|`qmk-dfu`    |(keyboard name) Bootloader    |As `atmel-dfu`|libusb0|
+|`halfkay`    |*none*                        |`16C0:0478`   |HidUsb |
+|`caterina`   |Pro Micro 3.3V                |`1B4F:9203`   |usbser |
+|`caterina`   |Pro Micro 5V                  |`1B4F:9205`   |usbser |
+|`caterina`   |LilyPadUSB                    |`1B4F:9207`   |usbser |
+|`caterina`   |Pololu A-Star 32U4 Bootloader |`1FFB:0101`   |usbser |
+|`caterina`   |Arduino Leonardo              |`2341:0036`   |usbser |
+|`caterina`   |Arduino Micro                 |`2341:0037`   |usbser |
+|`caterina`   |Adafruit Feather 32u4         |`239A:000C`   |usbser |
+|`caterina`   |Adafruit ItsyBitsy 32u4 3V    |`239A:000D`   |usbser |
+|`caterina`   |Adafruit ItsyBitsy 32u4 5V    |`239A:000E`   |usbser |
+|`caterina`   |Arduino Leonardo              |`2A03:0036`   |usbser |
+|`caterina`   |Arduino Micro                 |`2A03:0037`   |usbser |
+|`bootloadHID`|HIDBoot                       |`16C0:05DF`   |HidUsb |
+|`USBasp`     |USBasp                        |`16C0:05DC`   |libusbK|
+|`apm32-dfu`  |???                           |`314B:0106`   |WinUSB |
+|`stm32-dfu`  |STM32 BOOTLOADER              |`0483:DF11`   |WinUSB |
+|`kiibohd`    |Kiibohd DFU Bootloader        |`1C11:B007`   |WinUSB |
+|`stm32duino` |Maple 003                     |`1EAF:0003`   |WinUSB |

docs/ja/reference_keymap_extras.md

@@ -51,6 +51,7 @@ HID Keyboard/Keypad usage ページでは 256 未満の usage が定義されて
 | Norwegian                   | `keymap_norwegian.h`             |
 | Polish                      | `keymap_polish.h`                |
 | Portuguese                  | `keymap_portuguese.h`            |
+| Portuguese (macOS, ISO)     | `keymap_portuguese_osx_iso.h`    |
 | Portuguese (Brazil)         | `keymap_br_abnt2.h`              |
 | Romanian                    | `keymap_romanian.h`              |
 | Russian*                    | `keymap_russian.h`               |

docs/keycodes.md

@@ -124,17 +124,17 @@ See also: [Basic Keycodes](keycodes_basic.md)
 |`KC_F22`               |                              |F22                                            |✔            |             |✔                |
 |`KC_F23`               |                              |F23                                            |✔            |             |✔                |
 |`KC_F24`               |                              |F24                                            |✔            |             |✔                |
-|`KC_EXECUTE`           |`KC_EXEC`                     |Execute                                        |            |             |✔                |
-|`KC_HELP`              |                              |Help                                           |            |             |✔                |
-|`KC_MENU`              |                              |Menu                                           |            |             |✔                |
-|`KC_SELECT`            |`KC_SLCT`                     |Select                                         |            |             |✔                |
-|`KC_STOP`              |                              |Stop                                           |            |             |✔                |
-|`KC_AGAIN`             |`KC_AGIN`                     |Again                                          |            |             |✔                |
-|`KC_UNDO`              |                              |Undo                                           |            |             |✔                |
-|`KC_CUT`               |                              |Cut                                            |            |             |✔                |
-|`KC_COPY`              |                              |Copy                                           |            |             |✔                |
-|`KC_PASTE`             |`KC_PSTE`                     |Paste                                          |            |             |✔                |
-|`KC_FIND`              |                              |Find                                           |            |             |✔                |
+|`KC_EXECUTE`           |`KC_EXEC`                     |Execute                                        |             |             |✔                |
+|`KC_HELP`              |                              |Help                                           |             |             |✔                |
+|`KC_MENU`              |                              |Menu                                           |             |             |✔                |
+|`KC_SELECT`            |`KC_SLCT`                     |Select                                         |             |             |✔                |
+|`KC_STOP`              |                              |Stop                                           |             |             |✔                |
+|`KC_AGAIN`             |`KC_AGIN`                     |Again                                          |             |             |✔                |
+|`KC_UNDO`              |                              |Undo                                           |             |             |✔                |
+|`KC_CUT`               |                              |Cut                                            |             |             |✔                |
+|`KC_COPY`              |                              |Copy                                           |             |             |✔                |
+|`KC_PASTE`             |`KC_PSTE`                     |Paste                                          |             |             |✔                |
+|`KC_FIND`              |                              |Find                                           |             |             |✔                |
 |`KC__MUTE`             |                              |Mute                                           |             |✔            |✔                |
 |`KC__VOLUP`            |                              |Volume Up                                      |             |✔            |✔                |
 |`KC__VOLDOWN`          |                              |Volume Down                                    |             |✔            |✔                |

docs/keycodes_basic.md

@@ -144,48 +144,48 @@ The basic set of keycodes are based on the [HID Keyboard/Keypad Usage Page (0x07
 
 ## Commands
 
-|Key               |Aliases                       |Description                   |
-|------------------|------------------------------|------------------------------|
-|`KC_PSCREEN`      |`KC_PSCR`                     |Print Screen                  |
-|`KC_PAUSE`        |`KC_PAUS`, `KC_BRK`, `KC_BRMU`|Pause, Brightness Up (macOS)  |
-|`KC_INSERT`       |`KC_INS`                      |Insert                        |
-|`KC_HOME`         |                              |Home                          |
-|`KC_PGUP`         |                              |Page Up                       |
-|`KC_DELETE`       |`KC_DEL`                      |Forward Delete                |
-|`KC_END`          |                              |End                           |
-|`KC_PGDOWN`       |`KC_PGDN`                     |Page Down                     |
-|`KC_RIGHT`        |`KC_RGHT`                     |Right Arrow                   |
-|`KC_LEFT`         |                              |Left Arrow                    |
-|`KC_DOWN`         |                              |Down Arrow                    |
-|`KC_UP`           |                              |Up Arrow                      |
-|`KC_APPLICATION`  |`KC_APP`                      |Application (Windows Menu Key)|
-|`KC_POWER`        |                              |System Power (macOS/Linux)    |
-|`KC_EXECUTE`      |`KC_EXEC`                     |Execute                       |
-|`KC_HELP`         |                              |Help                          |
-|`KC_MENU`         |                              |Menu                          |
-|`KC_SELECT`       |`KC_SLCT`                     |Select                        |
-|`KC_STOP`         |                              |Stop                          |
-|`KC_AGAIN`        |`KC_AGIN`                     |Again                         |
-|`KC_UNDO`         |                              |Undo                          |
-|`KC_CUT`          |                              |Cut                           |
-|`KC_COPY`         |                              |Copy                          |
-|`KC_PASTE`        |`KC_PSTE`                     |Paste                         |
-|`KC_FIND`         |                              |Find                          |
-|`KC__MUTE`        |                              |Mute (macOS)                  |
-|`KC__VOLUP`       |                              |Volume Up (macOS)             |
-|`KC__VOLDOWN`     |                              |Volume Down (macOS)           |
-|`KC_ALT_ERASE`    |`KC_ERAS`                     |Alternate Erase               |
-|`KC_SYSREQ`       |                              |SysReq/Attention              |
-|`KC_CANCEL`       |                              |Cancel                        |
-|`KC_CLEAR`        |`KC_CLR`                      |Clear                         |
-|`KC_PRIOR`        |                              |Prior                         |
-|`KC_RETURN`       |                              |Return                        |
-|`KC_SEPARATOR`    |                              |Separator                     |
-|`KC_OUT`          |                              |Out                           |
-|`KC_OPER`         |                              |Oper                          |
-|`KC_CLEAR_AGAIN`  |                              |Clear/Again                   |
-|`KC_CRSEL`        |                              |CrSel/Props                   |
-|`KC_EXSEL`        |                              |ExSel                         |
+|Key               |Aliases                       |Description                           |
+|------------------|------------------------------|--------------------------------------|
+|`KC_PSCREEN`      |`KC_PSCR`                     |Print Screen                          |
+|`KC_PAUSE`        |`KC_PAUS`, `KC_BRK`, `KC_BRMU`|Pause, Brightness Up (macOS)          |
+|`KC_INSERT`       |`KC_INS`                      |Insert                                |
+|`KC_HOME`         |                              |Home                                  |
+|`KC_PGUP`         |                              |Page Up                               |
+|`KC_DELETE`       |`KC_DEL`                      |Forward Delete                        |
+|`KC_END`          |                              |End                                   |
+|`KC_PGDOWN`       |`KC_PGDN`                     |Page Down                             |
+|`KC_RIGHT`        |`KC_RGHT`                     |Right Arrow                           |
+|`KC_LEFT`         |                              |Left Arrow                            |
+|`KC_DOWN`         |                              |Down Arrow                            |
+|`KC_UP`           |                              |Up Arrow                              |
+|`KC_APPLICATION`  |`KC_APP`                      |Application (Windows Context Menu Key)|
+|`KC_POWER`        |                              |System Power                          |
+|`KC_EXECUTE`      |`KC_EXEC`                     |Execute                               |
+|`KC_HELP`         |                              |Help                                  |
+|`KC_MENU`         |                              |Menu                                  |
+|`KC_SELECT`       |`KC_SLCT`                     |Select                                |
+|`KC_STOP`         |                              |Stop                                  |
+|`KC_AGAIN`        |`KC_AGIN`                     |Again                                 |
+|`KC_UNDO`         |                              |Undo                                  |
+|`KC_CUT`          |                              |Cut                                   |
+|`KC_COPY`         |                              |Copy                                  |
+|`KC_PASTE`        |`KC_PSTE`                     |Paste                                 |
+|`KC_FIND`         |                              |Find                                  |
+|`KC__MUTE`        |                              |Mute                                  |
+|`KC__VOLUP`       |                              |Volume Up                             |
+|`KC__VOLDOWN`     |                              |Volume Down                           |
+|`KC_ALT_ERASE`    |`KC_ERAS`                     |Alternate Erase                       |
+|`KC_SYSREQ`       |                              |SysReq/Attention                      |
+|`KC_CANCEL`       |                              |Cancel                                |
+|`KC_CLEAR`        |`KC_CLR`                      |Clear                                 |
+|`KC_PRIOR`        |                              |Prior                                 |
+|`KC_RETURN`       |                              |Return                                |
+|`KC_SEPARATOR`    |                              |Separator                             |
+|`KC_OUT`          |                              |Out                                   |
+|`KC_OPER`         |                              |Oper                                  |
+|`KC_CLEAR_AGAIN`  |                              |Clear/Again                           |
+|`KC_CRSEL`        |                              |CrSel/Props                           |
+|`KC_EXSEL`        |                              |ExSel                                 |
 
 ## Media Keys
 
@@ -193,34 +193,34 @@ These keycodes are not part of the Keyboard/Keypad usage page. The `SYSTEM_` key
 
 ?> Some of these keycodes may behave differently depending on the OS. For example, on macOS, the keycodes `KC_MEDIA_FAST_FORWARD`, `KC_MEDIA_REWIND`, `KC_MEDIA_NEXT_TRACK` and `KC_MEDIA_PREV_TRACK` skip within the current track when held, but skip the entire track when tapped.
 
-|Key                    |Aliases  |Description                  |
-|-----------------------|---------|-----------------------------|
-|`KC_SYSTEM_POWER`      |`KC_PWR` |System Power Down            |
-|`KC_SYSTEM_SLEEP`      |`KC_SLEP`|System Sleep                 |
-|`KC_SYSTEM_WAKE`       |`KC_WAKE`|System Wake                  |
-|`KC_AUDIO_MUTE`        |`KC_MUTE`|Mute                         |
-|`KC_AUDIO_VOL_UP`      |`KC_VOLU`|Volume Up                    |
-|`KC_AUDIO_VOL_DOWN`    |`KC_VOLD`|Volume Down                  |
-|`KC_MEDIA_NEXT_TRACK`  |`KC_MNXT`|Next Track                   |
-|`KC_MEDIA_PREV_TRACK`  |`KC_MPRV`|Previous Track               |
-|`KC_MEDIA_STOP`        |`KC_MSTP`|Stop Track (Windows)         |
-|`KC_MEDIA_PLAY_PAUSE`  |`KC_MPLY`|Play/Pause Track             |
-|`KC_MEDIA_SELECT`      |`KC_MSEL`|Launch Media Player (Windows)|
-|`KC_MEDIA_EJECT`       |`KC_EJCT`|Eject (macOS)                |
-|`KC_MAIL`              |         |Launch Mail (Windows)        |
-|`KC_CALCULATOR`        |`KC_CALC`|Launch Calculator (Windows)  |
-|`KC_MY_COMPUTER`       |`KC_MYCM`|Launch My Computer (Windows) |
-|`KC_WWW_SEARCH`        |`KC_WSCH`|Browser Search (Windows)     |
-|`KC_WWW_HOME`          |`KC_WHOM`|Browser Home (Windows)       |
-|`KC_WWW_BACK`          |`KC_WBAK`|Browser Back (Windows)       |
-|`KC_WWW_FORWARD`       |`KC_WFWD`|Browser Forward (Windows)    |
-|`KC_WWW_STOP`          |`KC_WSTP`|Browser Stop (Windows)       |
-|`KC_WWW_REFRESH`       |`KC_WREF`|Browser Refresh (Windows)    |
-|`KC_WWW_FAVORITES`     |`KC_WFAV`|Browser Favorites (Windows)  |
-|`KC_MEDIA_FAST_FORWARD`|`KC_MFFD`|Next Track (macOS)           |
-|`KC_MEDIA_REWIND`      |`KC_MRWD`|Previous Track (macOS)       |
-|`KC_BRIGHTNESS_UP`     |`KC_BRIU`|Brightness Up                |
-|`KC_BRIGHTNESS_DOWN`   |`KC_BRID`|Brightness Down              |
+|Key                    |Aliases  |Description        |
+|-----------------------|---------|-------------------|
+|`KC_SYSTEM_POWER`      |`KC_PWR` |System Power Down  |
+|`KC_SYSTEM_SLEEP`      |`KC_SLEP`|System Sleep       |
+|`KC_SYSTEM_WAKE`       |`KC_WAKE`|System Wake        |
+|`KC_AUDIO_MUTE`        |`KC_MUTE`|Mute               |
+|`KC_AUDIO_VOL_UP`      |`KC_VOLU`|Volume Up          |
+|`KC_AUDIO_VOL_DOWN`    |`KC_VOLD`|Volume Down        |
+|`KC_MEDIA_NEXT_TRACK`  |`KC_MNXT`|Next Track         |
+|`KC_MEDIA_PREV_TRACK`  |`KC_MPRV`|Previous Track     |
+|`KC_MEDIA_STOP`        |`KC_MSTP`|Stop Track         |
+|`KC_MEDIA_PLAY_PAUSE`  |`KC_MPLY`|Play/Pause Track   |
+|`KC_MEDIA_SELECT`      |`KC_MSEL`|Launch Media Player|
+|`KC_MEDIA_EJECT`       |`KC_EJCT`|Eject              |
+|`KC_MAIL`              |         |Launch Mail        |
+|`KC_CALCULATOR`        |`KC_CALC`|Launch Calculator  |
+|`KC_MY_COMPUTER`       |`KC_MYCM`|Launch My Computer |
+|`KC_WWW_SEARCH`        |`KC_WSCH`|Browser Search     |
+|`KC_WWW_HOME`          |`KC_WHOM`|Browser Home       |
+|`KC_WWW_BACK`          |`KC_WBAK`|Browser Back       |
+|`KC_WWW_FORWARD`       |`KC_WFWD`|Browser Forward    |
+|`KC_WWW_STOP`          |`KC_WSTP`|Browser Stop       |
+|`KC_WWW_REFRESH`       |`KC_WREF`|Browser Refresh    |
+|`KC_WWW_FAVORITES`     |`KC_WFAV`|Browser Favorites  |
+|`KC_MEDIA_FAST_FORWARD`|`KC_MFFD`|Next Track         |
+|`KC_MEDIA_REWIND`      |`KC_MRWD`|Previous Track     |
+|`KC_BRIGHTNESS_UP`     |`KC_BRIU`|Brightness Up      |
+|`KC_BRIGHTNESS_DOWN`   |`KC_BRID`|Brightness Down    |
 
 ## Number Pad
 
@@ -248,7 +248,7 @@ These keycodes are not part of the Keyboard/Keypad usage page. The `SYSTEM_` key
 
 ## Special Keys
 
-In addition to these, keycodes in the range of `0xA5-DF` are reserved for internal use by TMK.
+In addition to these, keycodes in the range of `0xA5-DF` are reserved for internal use.
 
 |Key             |Aliases             |Description                            |
 |----------------|--------------------|---------------------------------------|

docs/reference_keymap_extras.md

@@ -46,6 +46,7 @@ To use these, simply `#include` the corresponding [header file](https://github.c
 |Norwegian                  |`keymap_norwegian.h`            |
 |Polish                     |`keymap_polish.h`               |
 |Portuguese                 |`keymap_portuguese.h`           |
+|Portuguese (macOS, ISO)    |`keymap_portuguese_osx_iso.h`   |
 |Portuguese (Brazil)        |`keymap_br_abnt2.h`             |
 |Romanian                   |`keymap_romanian.h`             |
 |Russian*                   |`keymap_russian.h`              |

keyboards/40percentclub/sixpack/config.h

@@ -0,0 +1,122 @@
+/*
+Copyright 2020
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x3430 // "40"
+#define PRODUCT_ID      0x5350 // "SP"
+#define DEVICE_VER      0x1001
+#define MANUFACTURER    di0ib
+#define PRODUCT         Six Pack
+
+/* key matrix size */
+#define MATRIX_ROWS 2
+#define MATRIX_COLS 3
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+// #define MATRIX_ROW_PINS { B0 } // B0 equivalents the ground pin
+// #define MATRIX_COL_PINS { E6, D7, C6, D4 }
+#define DIRECT_PINS { \
+    { D4, C6, D7 }, \
+    { E6, B4, B5 }  \
+}
+#define UNUSED_PINS { D1, D0, C4, C5, B1, B2, B3 } // TX, RX, SDA, SCL, PB1, PB2, PB3 on expansion connector
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/* Backlight */
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 6
+#define BACKLIGHT_PINS { F4, F5 } // Top Row, Bottom Row
+
+// #define RGB_DI_PIN B1 // PB1 on expansion connector
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+//   /*==== use exp() and sin() ====*/
+//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/40percentclub/sixpack/info.json

@@ -0,0 +1,15 @@
+{
+    "keyboard_name": "sixpack",
+    "url": "https://www.40percent.club/2017/05/six-pack-11.html",
+    "maintainer": "qmk",
+    "width": 3,
+    "height": 2,
+    "layouts": {
+        "LAYOUT_ortho_2x3": {
+          "layout": [
+                {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0},
+                {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}
+          ]
+        }
+    }
+}

keyboards/40percentclub/sixpack/keymaps/default/keymap.c

@@ -0,0 +1,31 @@
+/* Copyright 2020
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    /* Default 2x3 layout
+     * .--------------------------.
+     * |  MUTE  |   UP   |  PLAY  |
+     * |--------+--------+--------+
+     * |  LEFT  |  DOWN  |  RIGHT |
+     * '--------------------------'
+     */
+
+    [0] = LAYOUT_ortho_2x3(/* Default */
+                 KC_MUTE, KC_UP,   KC_MPLY,
+                 KC_LEFT, KC_DOWN, KC_RGHT),
+};

keyboards/40percentclub/sixpack/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for Six Pack

keyboards/40percentclub/sixpack/keymaps/fkeys/keymap.c

@@ -0,0 +1,50 @@
+/* Copyright 2020
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Tap Dance declarations
+enum {
+    F13F19,
+    F14F20,
+    F15F21,
+    F16F22,
+    F17F23,
+    F18F24,
+};
+
+// Tap Dance definitions
+qk_tap_dance_action_t tap_dance_actions[] = {
+    // Tap once for F13 to F18, twice for F19 to F24
+    [F13F19] = ACTION_TAP_DANCE_DOUBLE(KC_F13, KC_F19), [F14F20] = ACTION_TAP_DANCE_DOUBLE(KC_F14, KC_F20), [F15F21] = ACTION_TAP_DANCE_DOUBLE(KC_F15, KC_F21),
+    [F16F22] = ACTION_TAP_DANCE_DOUBLE(KC_F16, KC_F22), [F17F23] = ACTION_TAP_DANCE_DOUBLE(KC_F17, KC_F23), [F18F24] = ACTION_TAP_DANCE_DOUBLE(KC_F18, KC_F24)
+};
+
+// Add tap dance item in place of a key code
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    /* 2x3 layout
+     * .-----------------------------.
+     * | F13/F19 | D14/F20 | F15/F21 |
+     * |---------+---------+---------+
+     * | F16/F22 | D17/F23 | F18/F24 |
+     * '-----------------------------'
+     */
+
+    [0] = LAYOUT_ortho_2x3(/* F13 to F24 */
+                 TD(F13F19), TD(F14F20), TD(F15F21),
+		 TD(F16F22), TD(F17F23), TD(F18F24)
+		),
+};

keyboards/40percentclub/sixpack/keymaps/fkeys/readme.md

@@ -0,0 +1 @@
+# F13 to F24 keymap with Tap Dance for Six Pack

keyboards/40percentclub/sixpack/keymaps/fkeys/rules.mk

@@ -0,0 +1 @@
+TAP_DANCE_ENABLE = yes

keyboards/40percentclub/sixpack/keymaps/via/keymap.c

@@ -0,0 +1,41 @@
+/* Copyright 2020
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    /* Default 2x3 layout with 6 Layers
+     * .--------------------------.
+     * |  MUTE  |   UP   |  PLAY  |
+     * |--------+--------+--------+
+     * |  LEFT  |  DOWN  |  RIGHT |
+     * '--------------------------'
+     */
+
+    [0] = LAYOUT_ortho_2x3(KC_MUTE, KC_UP  , KC_MPLY,
+		 KC_LEFT, KC_DOWN, KC_RGHT),
+    [1] = LAYOUT_ortho_2x3(KC_TRNS, KC_TRNS, KC_TRNS,
+		 KC_TRNS, KC_TRNS, KC_TRNS),
+    [2] = LAYOUT_ortho_2x3(KC_TRNS, KC_TRNS, KC_TRNS,
+		 KC_TRNS, KC_TRNS, KC_TRNS),
+    [3] = LAYOUT_ortho_2x3(KC_TRNS, KC_TRNS, KC_TRNS,
+		 KC_TRNS, KC_TRNS, KC_TRNS),
+    [4] = LAYOUT_ortho_2x3(KC_TRNS, KC_TRNS, KC_TRNS,
+		 KC_TRNS, KC_TRNS, KC_TRNS),
+    [5] = LAYOUT_ortho_2x3(KC_TRNS, KC_TRNS, KC_TRNS,
+		 KC_TRNS, KC_TRNS, KC_TRNS),
+
+};

keyboards/40percentclub/sixpack/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/40percentclub/sixpack/readme.md

@@ -0,0 +1,21 @@
+# Six Pack
+
+![sixpack](https://4.bp.blogspot.com/-sCUGxPAmcu4/WQj4cd9ZlAI/AAAAAAACBhs/174XLIHIfzISucFFEgo53H73HdVJfn3ZwCLcB/s640/IMG_0265.JPG)
+
+A 6-key macropad PCB with its switch and LED pins wired directly to microcontroller IO pins.
+
+You can find the main blog post about this macropad [here](http://www.40percent.club/2017/05/six-pack-11.html), also the Gerber files and other documentation is located [here](https://git.40percent.club/di0ib/Misc/src/branch/master/Six%20Pack).
+
+* Keyboard Maintainer: [The QMK Community](https://github.com/qmk)
+* Hardware Supported: Six Pack PCB, Pro Micro
+* Hardware Availability: [40percent.club](https://git.40percent.club/di0ib/Misc/src/branch/master/Six%20Pack)
+
+Make example for this macropad (after setting up your build environment):
+
+    make 40percentclub/sixpack:default
+
+Flashing example for this keyboard:
+
+    make 40percentclub/sixpack:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/40percentclub/sixpack/rules.mk

@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output

keyboards/40percentclub/sixpack/sixpack.c

@@ -0,0 +1,24 @@
+/* Copyright 2020
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "sixpack.h"
+
+void matrix_init_kb(void) {
+    setPinOutput(B6);  // Backlight cathodes Col.3
+    setPinOutput(F6);  // Backlight cathodes Col.2
+    setPinOutput(F7);  // Backlight cathodes Col.1
+
+    matrix_init_user();
+}

keyboards/40percentclub/sixpack/sixpack.h

@@ -0,0 +1,34 @@
+/* Copyright 2020
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_ortho_2x3( \
+    k00, k01, k02, \
+    k10, k11, k12  \
+) { \
+    { k00, k01, k02 }, \
+    { k10, k11, k12 }  \
+}

keyboards/aleth42/info.json

@@ -0,0 +1,54 @@
+{
+    "keyboard_name": "aleth42", 
+    "url": "http://www.sho-k.co.uk/tech/aleth42", 
+    "maintainer": "monksoffunk", 
+    "width": 12, 
+    "height": 4, 
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+                {"x":4, "y":0},
+                {"x":5, "y":0},
+                {"x":6, "y":0},
+                {"x":7, "y":0},
+                {"x":8, "y":0},
+                {"x":9, "y":0},
+                {"x":10, "y":0},
+                {"x":11, "y":0},
+                {"x":0, "y":1, "w":1.25},
+                {"x":1.25, "y":1},
+                {"x":2.25, "y":1},
+                {"x":3.25, "y":1},
+                {"x":4.25, "y":1},
+                {"x":5.25, "y":1},
+                {"x":6.25, "y":1},
+                {"x":7.25, "y":1},
+                {"x":8.25, "y":1},
+                {"x":9.25, "y":1},
+                {"x":10.25, "y":1, "w":1.75},
+                {"x":0, "y":2, "w":1.75},
+                {"x":1.75, "y":2},
+                {"x":2.75, "y":2},
+                {"x":3.75, "y":2},
+                {"x":4.75, "y":2},
+                {"x":5.75, "y":2},
+                {"x":6.75, "y":2},
+                {"x":7.75, "y":2},
+                {"x":8.75, "y":2},
+                {"x":9.75, "y":2},
+                {"x":10.75, "y":2, "w":1.25},
+                {"x":0, "y":3, "w":1.25},
+                {"x":1.25, "y":3},
+                {"x":2.25, "y":3, "w":1.25},
+                {"x":3.5, "y":3, "w":2.75},
+                {"x":6.25, "y":3, "w":2.25},
+                {"x":8.5, "y":3, "w":1.25},
+                {"x":9.75, "y":3},
+                {"x":10.75, "y":3, "w":1.25}]
+        }
+    }
+}

keyboards/aleth42/keymaps/default/keymap.c

@@ -0,0 +1,149 @@
+/* Copyright 2020 monksoffunk
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _QWERTY,
+    _LOWER,
+    _RAISE,
+    _ADJUST,
+};
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+    QWERTY = SAFE_RANGE,
+    LOWER,
+    RAISE,
+    ADJUST,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Default Layer
+     * ,-----------------------------------------------------------.
+     * | Esc|  Q |  W |  E |  R |  T |  Y |  U |  I |  O |  P | BS |
+     * |-----------------------------------------------------------|
+     * | Tab |  A |  S |  D |  F |  G |  H |  J |  K |  L | Ent    |
+     * |-----------------------------------------------------------|
+     * | LSft   |  Z |  X |  C |  V |  B |  N |  M |  , |  . |fn(/)|
+     * |-----------------------------------------------------------|
+     * | LCtl | LAlt| LGui|  spc fn0  |  spc fn1    |RGui|RAlt|RCtl|
+     * `-----------------------------------------------------------'
+ */
+    [_QWERTY] = LAYOUT(
+        KC_ESC,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,    KC_O,    KC_P,   KC_BSPC,
+        KC_TAB,  KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,    KC_L,    KC_ENT,
+        KC_LSFT, KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  LT(_ADJUST, KC_SLSH),
+        KC_LCTL, KC_LALT   , KC_LGUI, LT(_LOWER, KC_SPC),   LT(_RAISE, KC_SPC), KC_RGUI, KC_RALT, KC_RCTL
+        ),
+
+ /* Lower Layer
+     * ,-----------------------------------------------------------.
+     * |  ~ |  ! |  @ |  # |  $ |  % |  ^ |  & |  * |  ( |  ) | Del|
+     * |-----------------------------------------------------------|
+     * |        |    |    |    |    |     | _ | + | { | } |  Pipe  |
+     * |-----------------------------------------------------------|
+     * |          |    |    |    |    |    |   | ;  | '  | Up |    |
+     * |-----------------------------------------------------------|
+     * |     |    |     |           |             |Left|Down|Right |
+     * `-----------------------------------------------------------'
+     */
+    [_LOWER] = LAYOUT(
+        KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,
+		_______, _______, _______, _______, _______, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
+		_______, _______, _______, _______, _______, _______, _______, KC_SCLN, KC_QUOT, KC_UP,   _______,
+		_______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT
+		),
+
+	/* Raise Layer
+     * ,-----------------------------------------------------------.
+     * |  ` |  1 |  2 |  3 |  4 |  5 |  6 |  7 |  8 |  9 |  0 | Del|
+     * |-----------------------------------------------------------|
+     * |  F1   | F2  | F3 | F4 | F5 |  F6 | - | = | [ | ] |  Pipe  |
+     * |-----------------------------------------------------------|
+     * |    F7    | F8 | F9 | F10| F11| F12|  \ |  \ |   |    |    |
+     * |-----------------------------------------------------------|
+     * |     |    |     |           |             |     |    |     |
+     * `-----------------------------------------------------------'
+     */
+    [_RAISE] = LAYOUT(
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,
+		KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+		KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______,
+		_______, _______, _______, _______, _______, _______, _______, _______
+		),
+
+	/* Adjust Layer
+     * ,-----------------------------------------------------------.
+     * |Mute| F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10|F11 |
+     * |-----------------------------------------------------------|
+     * |       |BTOG |BSTP|BINC| MAC|RGBTOG|HUI|WIN|SAI|VAI|  F12  |
+     * |-----------------------------------------------------------|
+     * |   Caps   |Reset|BBRE|BDEC|    |RMOD|HUD |   |SAD|VAD |    |
+     * |-----------------------------------------------------------|
+     * |SLEEP|    |     |           |             |     |    |     |
+     * `-----------------------------------------------------------'
+      */
+    [_ADJUST] = LAYOUT(
+        KC_MUTE, KC_F1,   KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,
+		_______, BL_TOGG, BL_STEP, BL_INC,  AG_NORM,  RGB_TOG, RGB_HUI, AG_SWAP, RGB_SAI, RGB_VAI,  KC_F12,
+		KC_CAPS, RESET,   BL_BRTG, BL_DEC,  _______,  RGB_MOD, RGB_HUD, _______, RGB_SAD, RGB_VAD,  _______,
+		KC_SLEP, _______, _______, _______, _______, _______, _______, _______
+		),
+};
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) { /* Left encoder */
+        switch (get_highest_layer(layer_state)) {
+            case _QWERTY:
+                if (clockwise) {
+                    tap_code(KC_TAB);
+                } else {
+                    tap_code16(S(KC_TAB));
+                }
+                break;
+            case _RAISE:
+                if (clockwise) {
+                //    tap_code(KC_VOLU);
+                    if(keymap_config.swap_lalt_lgui==false){
+                        tap_code(KC_LANG2);
+                    }else {
+                        tap_code16(A(KC_GRV));
+                    }
+                } else {
+                    if(keymap_config.swap_lalt_lgui==false){
+                    tap_code(KC_LANG1);
+                    } else {
+                        tap_code16(A(KC_GRV));
+                    }
+                }
+                break;
+            case _ADJUST:
+                if (clockwise) {
+                    tap_code(KC_VOLU);
+                } else {
+                    tap_code(KC_VOLD);
+            }
+        }
+
+    } else if (index == 1) { /* Right encoder */
+        if (clockwise) {
+            tap_code(KC_PGDN);
+        } else {
+            tap_code(KC_PGUP);
+        }
+    }
+}

keyboards/aleth42/keymaps/default/readme.md

@@ -0,0 +1,50 @@
+# The default keymap for aleth42
+
+Default Layer
+
+    ,-----------------------------------------------------------.
+    | Esc|  Q |  W |  E |  R |  T |  Y |  U |  I |  O |  P | BS |
+    |-----------------------------------------------------------|
+    | Tab |  A |  S |  D |  F |  G |  H |  J |  K |  L | Ent    |
+    |-----------------------------------------------------------|
+    | LSft   |  Z |  X |  C |  V |  B |  N |  M |  , |  . |fn(/)|
+    |-----------------------------------------------------------|
+    | Lctl | LAlt| LGui|  spc fn0  |  spc fn1    |RGui|RAlt|RCtl|
+    `-----------------------------------------------------------'
+
+Lower Layer = fn0
+
+    ,-----------------------------------------------------------.
+    |  ~ |  ! |  @ |  # |  $ |  % |  ^ |  & |  * |  ( |  ) | Del|
+    |-----------------------------------------------------------|
+    |        |    |    |    |    |     | _ | + | { | } |  Pipe  |
+    |-----------------------------------------------------------|
+    |          |    |    |    |    |    |   | ;  | '  | Up |    |
+    |-----------------------------------------------------------|
+    |     |    |     |           |             |Left|Down|Right |
+    `-----------------------------------------------------------'
+
+Raise Layer = fn1
+
+    ,-----------------------------------------------------------.
+    |  ` |  1 |  2 |  3 |  4 |  5 |  6 |  7 |  8 |  9 |  0 | Del|
+    |-----------------------------------------------------------|
+    |  F1   | F2  | F3 | F4 | F5 |  F6 | - | = | [ | ] |  Pipe  |
+    |-----------------------------------------------------------|
+    |    F7    | F8 | F9 | F10| F11| F12|  \ |  \ |   |    |    |
+    |-----------------------------------------------------------|
+    |     |    |     |           |             |     |    |     |
+    `-----------------------------------------------------------'
+
+Adjust Layer = fn
+
+    ,-----------------------------------------------------------.
+    |Mute| F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10|F11 |
+    |-----------------------------------------------------------|
+    |       |BTOG |BSTP|BINC| MAC|RGBTOG|HUI|WIN|SAI|VAI|  F12  |
+    |-----------------------------------------------------------|
+    |   Caps   |Reset|BBRE|BDEC|    |RMOD|HUD |   |SAD|VAD |    |
+    |-----------------------------------------------------------|
+    |SLEEP|    |     |           |             |     |    |     |
+    `-----------------------------------------------------------'
+ 

keyboards/aleth42/keymaps/via/config.h

@@ -0,0 +1,22 @@
+/* Copyright 2020 monksoffunk
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here
+// #define TAPPING_TERM 200
+#define PERMISSIVE_HOLD
+#define ENCODER_RESOLUTION 2

keyboards/aleth42/keymaps/via/keymap.c

@@ -0,0 +1,149 @@
+/* Copyright 2020 monksoffunk
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _QWERTY,
+    _LOWER,
+    _RAISE,
+    _ADJUST,
+};
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+    QWERTY = SAFE_RANGE,
+    LOWER,
+    RAISE,
+    ADJUST,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Default Layer
+     * ,-----------------------------------------------------------.
+     * | Esc|  Q |  W |  E |  R |  T |  Y |  U |  I |  O |  P | BS |
+     * |-----------------------------------------------------------|
+     * | Tab |  A |  S |  D |  F |  G |  H |  J |  K |  L | Ent    |
+     * |-----------------------------------------------------------|
+     * | LSft   |  Z |  X |  C |  V |  B |  N |  M |  , |  . |fn(/)|
+     * |-----------------------------------------------------------|
+     * | Esc  | LAlt| LGui|  spc fn0  |  spc fn1    |RGui|RAlt|RCtl|
+     * `-----------------------------------------------------------'
+ */
+    [_QWERTY] = LAYOUT(
+        KC_ESC,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,    KC_O,    KC_P,   KC_BSPC,
+        MT(MOD_LCTL, KC_TAB),  KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,    KC_L,    KC_ENT,
+        KC_LSFT, KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  LT(_ADJUST, KC_SLSH),
+        MT(MOD_LCTL, KC_ESC), KC_LALT   , KC_LGUI, LT(_LOWER, KC_SPC),   LT(_RAISE, KC_SPC), KC_RGUI, KC_RALT, KC_RCTL
+        ),
+
+ /* Lower Layer
+     * ,-----------------------------------------------------------.
+     * |  ~ |  ! |  @ |  # |  $ |  % |  ^ |  & |  * |  ( |  ) | Del|
+     * |-----------------------------------------------------------|
+     * |        |    |    |    |    |     | _ | + | { | } |  Pipe  |
+     * |-----------------------------------------------------------|
+     * |          |    |    |    |    |    |   | ;  | '  | Up |    |
+     * |-----------------------------------------------------------|
+     * |     |    |     |           |             |Left|Down|Right |
+     * `-----------------------------------------------------------'
+     */
+    [_LOWER] = LAYOUT(
+        KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,
+		_______, _______, _______, _______, _______, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
+		_______, _______, _______, _______, _______, _______, _______, KC_SCLN, KC_QUOT, KC_UP,   _______,
+		_______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT
+		),
+
+	/* Raise Layer
+     * ,-----------------------------------------------------------.
+     * |  ` |  1 |  2 |  3 |  4 |  5 |  6 |  7 |  8 |  9 |  0 | Del|
+     * |-----------------------------------------------------------|
+     * |  F1   | F2  | F3 | F4 | F5 |  F6 | - | = | [ | ] |  Pipe  |
+     * |-----------------------------------------------------------|
+     * |    F7    | F8 | F9 | F10| F11| F12|  \ |  \ |   |    |    |
+     * |-----------------------------------------------------------|
+     * |     |    |     |           |             |     |    |     |
+     * `-----------------------------------------------------------'
+     */
+    [_RAISE] = LAYOUT(
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,
+		KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+		KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______,
+		_______, _______, _______, _______, _______, _______, _______, _______
+		),
+
+	/* Adjust Layer
+     * ,-----------------------------------------------------------.
+     * |Mute| F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10|F11 |
+     * |-----------------------------------------------------------|
+     * |       |BTOG |BSTP|BINC| MAC|RGBTOG|HUI|WIN|SAI|VAI|  F12  |
+     * |-----------------------------------------------------------|
+     * |   Caps   |Reset|BBRE|BDEC|    |RMOD|HUD |   |SAD|VAD |    |
+     * |-----------------------------------------------------------|
+     * |SLEEP|    |     |           |             |     |    |     |
+     * `-----------------------------------------------------------'
+      */
+    [_ADJUST] = LAYOUT(
+        KC_MUTE, KC_F1,   KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,
+		_______, BL_TOGG, BL_STEP, BL_INC,  AG_NORM,  RGB_TOG, RGB_HUI, AG_SWAP, RGB_SAI, RGB_VAI,  KC_F12,
+		KC_CAPS, RESET,   BL_BRTG, BL_DEC,  _______,  RGB_MOD, RGB_HUD, _______, RGB_SAD, RGB_VAD,  _______,
+		KC_SLEP, _______, _______, _______, _______, _______, _______, _______
+		),
+};
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) { /* Left encoder */
+        switch (get_highest_layer(layer_state)) {
+            case _QWERTY:
+                if (clockwise) {
+                    tap_code(KC_TAB);
+                } else {
+                    tap_code16(S(KC_TAB));
+                }
+                break;
+            case _RAISE:
+                if (clockwise) {
+                //    tap_code(KC_VOLU);
+                    if(keymap_config.swap_lalt_lgui==false){
+                        tap_code(KC_LANG2);
+                    }else {
+                        tap_code16(A(KC_GRV));
+                    }
+                } else {
+                    if(keymap_config.swap_lalt_lgui==false){
+                    tap_code(KC_LANG1);
+                    } else {
+                        tap_code16(A(KC_GRV));
+                    }
+                }
+                    break;
+            case _ADJUST:
+                if (clockwise) {
+                    tap_code(KC_VOLU);
+                } else {
+                    tap_code(KC_VOLD);
+            }
+        }
+
+    } else if (index == 1) { /* Right encoder */
+        if (clockwise) {
+            tap_code(KC_PGDN);
+        } else {
+            tap_code(KC_PGUP);
+        }
+    }
+}

keyboards/aleth42/keymaps/via/readme.md

@@ -0,0 +1,56 @@
+# The VIA keymap for aleth42
+
+Default Layer
+
+    ,-----------------------------------------------------------.
+    | Esc|  Q |  W |  E |  R |  T |  Y |  U |  I |  O |  P | BS |
+    |-----------------------------------------------------------|
+    | Tab*|  A |  S |  D |  F |  G |  H |  J |  K |  L | Ent    |
+    |-----------------------------------------------------------|
+    | LSft   |  Z |  X |  C |  V |  B |  N |  M |  , |  . |fn(/)|
+    |-----------------------------------------------------------|
+    | Esc* | LAlt| LGui|  spc fn0  |  spc fn1    |RGui|RAlt|RCtl|
+    `-----------------------------------------------------------'
+
+Tab* would activate Left Control when held, and send Tab when tapped.
+
+Esc* would activate Left Control when held, and send Escape when tapped.
+
+Esc* is useful with a rotary encoder @ upper-left Esc location.
+
+Lower Layer = fn0
+
+    ,-----------------------------------------------------------.
+    |  ~ |  ! |  @ |  # |  $ |  % |  ^ |  & |  * |  ( |  ) | Del|
+    |-----------------------------------------------------------|
+    |        |    |    |    |    |     | _ | + | { | } |  Pipe  |
+    |-----------------------------------------------------------|
+    |          |    |    |    |    |    |   | ;  | '  | Up |    |
+    |-----------------------------------------------------------|
+    |     |    |     |           |             |Left|Down|Right |
+    `-----------------------------------------------------------'
+
+Raise Layer = fn1
+
+    ,-----------------------------------------------------------.
+    |  ` |  1 |  2 |  3 |  4 |  5 |  6 |  7 |  8 |  9 |  0 | Del|
+    |-----------------------------------------------------------|
+    |  F1   | F2  | F3 | F4 | F5 |  F6 | - | = | [ | ] |  Pipe  |
+    |-----------------------------------------------------------|
+    |    F7    | F8 | F9 | F10| F11| F12|  \ |  \ |   |    |    |
+    |-----------------------------------------------------------|
+    |     |    |     |           |             |     |    |     |
+    `-----------------------------------------------------------'
+
+Adjust Layer = fn
+
+    ,-----------------------------------------------------------.
+    |Mute| F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10|F11 |
+    |-----------------------------------------------------------|
+    |       |BTOG |BSTP|BINC| MAC|RGBTOG|HUI|WIN|SAI|VAI|  F12  |
+    |-----------------------------------------------------------|
+    |   Caps   |Reset|BBRE|BDEC|    |RMOD|HUD |   |SAD|VAD |    |
+    |-----------------------------------------------------------|
+    |SLEEP|    |     |           |             |     |    |     |
+    `-----------------------------------------------------------'
+ 

keyboards/aleth42/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+CONSOLE_ENABLE = no

keyboards/aleth42/readme.md

@@ -0,0 +1,15 @@
+# ALETH42
+
+![ALETH42](https://i.imgur.com/6hJVBQl.png)
+
+40% keyboard with rotary encoder (optional)
+
+* Keyboard Maintainer: [monksoffunk](https://github.com/monksoffunk/) [@monksoffunkJP](https://twitter.com/monksoffunkJP)
+* Hardware Supported: ALETH42 PCB
+* Hardware Availability: [twitter](https://twitter.com/monksoffunkJP), [Booth](https://25keys.booth.pm/items/2420095)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make aleth42:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/aleth42/rev0/config.h

@@ -0,0 +1,82 @@
+/*
+Copyright 2020 monksoffunk
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x04D8
+#define PRODUCT_ID 0xEAC8
+#define DEVICE_VER 0x0000
+#define MANUFACTURER 25KEYS
+#define PRODUCT ALETH42
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 11
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B0, B1, B2, B3 }
+#define MATRIX_COL_PINS { D0, D1, D2, D3, D4, D5, D6, C2, C4, C5, C6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+#define ENCODERS_PAD_A { B6, B5 }  // located @ upper left
+#define ENCODERS_PAD_B { B7, B4 }  // located @ bottom left
+
+#define RGB_DI_PIN C7
+#ifdef RGB_DI_PIN
+   #define RGBLED_NUM 6
+   #define RGBLIGHT_HUE_STEP 8
+   #define RGBLIGHT_SAT_STEP 8
+   #define RGBLIGHT_VAL_STEP 8
+   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+ /*== all animations enable ==*/
+   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+//   /*==== use exp() and sin() ====*/
+//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION

keyboards/aleth42/rev0/readme.md

@@ -0,0 +1,15 @@
+# ALETH42
+
+![ALETH42](https://i.imgur.com/6hJVBQl.png)
+
+40% keyboard with rotary encoder (optional)
+
+* Keyboard Maintainer: [monksoffunk](https://github.com/monksoffunk/) [@monksoffunkJP](https://twitter.com/monksoffunkJP)
+* Hardware Supported: ALETH42 PCB
+* Hardware Availability: [twitter](https://twitter.com/monksoffunkJP)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make aleth42:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/aleth42/rev0/rev0.c

@@ -0,0 +1,17 @@
+/* Copyright 2020 monksoffunk
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "rev0.h"

keyboards/aleth42/rev0/rev0.h

@@ -0,0 +1,54 @@
+/* Copyright 2020 monksoffunk
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+// for readability
+#define XXX KC_NO
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+/* ALETH42 layout
+ * ,-----------------------------------------------------------.
+ * | 00 | 01 | 02 | 03 | 04 | 05 | 06 | 07 | 08 | 09 | 0A | 38 |
+ * |-----------------------------------------------------------|
+ * | 10   | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 1A    |
+ * |-----------------------------------------------------------|
+ * | 20     | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 2A  |
+ * |-----------------------------------------------------------|
+ * | 30 | 31  | 32  |    33     |      34     | 35  | 36 | 37  |
+ * `-----------------------------------------------------------'
+ */
+#define LAYOUT( \
+  k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k38,\
+  k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A,\
+  k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A,\
+  k30, k31, k32, k33, k34, k35, k36, k37\
+) \
+{ \
+  { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A },\
+  { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A },\
+  { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A },\
+  { k30, k31, k32, k33, k34, k35, k36, k37, XXX, XXX, k38 }\
+}

keyboards/aleth42/rev0/rules.mk

@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u2
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+ENCODER_ENABLE = yes
+TAP_DANCE_ENABLE = no

keyboards/aleth42/rev1/config.h

@@ -0,0 +1,82 @@
+/*
+Copyright 2020 monksoffunk
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x04D8
+#define PRODUCT_ID 0xEAC8
+#define DEVICE_VER 0x0001
+#define MANUFACTURER 25KEYS
+#define PRODUCT ALETH42
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 11
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B4, B0, B2, B1 }
+#define MATRIX_COL_PINS { D5, D3, D2, D1, D0, D6, D4, F7, F0, F1, F4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+#define ENCODERS_PAD_A { B5, F5 }
+#define ENCODERS_PAD_B { B6, F6 }
+
+#define BACKLIGHT_PIN C6
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 8
+
+#define RGB_DI_PIN B3
+#ifdef RGB_DI_PIN
+   #define RGBLED_NUM 8
+   #define RGBLIGHT_HUE_STEP 8
+   #define RGBLIGHT_SAT_STEP 8
+   #define RGBLIGHT_VAL_STEP 8
+   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+ /*== all animations enable ==*/
+   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+//   /*==== use exp() and sin() ====*/
+//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE

keyboards/aleth42/rev1/readme.md

@@ -0,0 +1,15 @@
+# ALETH42
+
+![ALETH42](https://i.imgur.com/6hJVBQl.png)
+
+40% keyboard with rotary encoder (optional)
+
+* Keyboard Maintainer: [monksoffunk](https://github.com/monksoffunk/) [@monksoffunkJP](https://twitter.com/monksoffunkJP)
+* Hardware Supported: ALETH42 PCB
+* Hardware Availability: [twitter](https://twitter.com/monksoffunkJP), [Booth](https://25keys.booth.pm/items/2420095)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make aleth42:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/aleth42/rev1/rev1.c

@@ -0,0 +1,17 @@
+/* Copyright 2020 monksoffunk
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "rev1.h"

keyboards/aleth42/rev1/rev1.h

@@ -0,0 +1,54 @@
+/* Copyright 2020 monksoffunk
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+// for readability
+#define XXX KC_NO
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+/* ALETH42 layout
+ * ,-----------------------------------------------------------.
+ * | 00 | 01 | 02 | 03 | 04 | 05 | 06 | 07 | 08 | 09 | 0A | 38 |
+ * |-----------------------------------------------------------|
+ * | 10   | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 1A    |
+ * |-----------------------------------------------------------|
+ * | 20     | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 2A  |
+ * |-----------------------------------------------------------|
+ * | 30 | 31  | 32  |    33     |      34     | 35  | 36 | 37  |
+ * `-----------------------------------------------------------'
+ */
+#define LAYOUT( \
+  k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k38,\
+  k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A,\
+  k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A,\
+  k30, k31, k32, k33, k34, k35, k36, k37\
+) \
+{ \
+  { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A },\
+  { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A },\
+  { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A },\
+  { k30, k31, k32, k33, k34, k35, k36, k37, XXX, XXX, k38 }\
+}

keyboards/aleth42/rev1/rules.mk

@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+ENCODER_ENABLE = yes
+TAP_DANCE_ENABLE = no

keyboards/aleth42/rules.mk

@@ -0,0 +1 @@
+DEFAULT_FOLDER = aleth42/rev1

keyboards/axolstudio/helpo/config.h

@@ -0,0 +1,42 @@
+/*
+Copyright 2020 kb-elmo
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0x525C
+#define PRODUCT_ID   0xC89F
+#define DEVICE_VER   0x0001
+#define MANUFACTURER Axolstudio
+#define PRODUCT      Helpo
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 5
+
+/* Keyboard Matrix Assignments */
+
+#define MATRIX_ROW_PINS { A2, A3, A4, A5 }
+#define MATRIX_COL_PINS { A1, B4, B3, B2, B1 }
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5

keyboards/axolstudio/helpo/helpo.c

@@ -0,0 +1,17 @@
+/* Copyright 2020 kb-elmo
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "helpo.h"

keyboards/axolstudio/helpo/helpo.h

@@ -0,0 +1,39 @@
+/* Copyright 2020 kb-elmo
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    k04, k03, k02, k01, k00, \
+    k09, k08, k07, k06, k05, \
+    k14, k13, k12, k11, k10, \
+    k19, k18, k17, k16, k15  \
+) { \
+    { k00, k01, k02, k03, k04, }, \
+    { k05, k06, k07, k08, k09, }, \
+    { k10, k11, k12, k13, k14, }, \
+    { k15, k16, k17, k18, k19, }  \
+}

keyboards/axolstudio/helpo/info.json

@@ -0,0 +1,33 @@
+{
+    "keyboard_name": "helpo", 
+    "url": "", 
+    "maintainer": "kb-elmo", 
+    "width": 5, 
+    "height": 4, 
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+                {"x":4, "y":0},
+                {"x":0, "y":1},
+                {"x":1, "y":1},
+                {"x":2, "y":1},
+                {"x":3, "y":1},
+                {"x":4, "y":1},
+                {"x":0, "y":2},
+                {"x":1, "y":2},
+                {"x":2, "y":2},
+                {"x":3, "y":2},
+                {"x":4, "y":2},
+                {"x":0, "y":3},
+                {"x":1, "y":3},
+                {"x":2, "y":3},
+                {"x":3, "y":3},
+                {"x":4, "y":3}
+            ]
+        }
+    }
+}

keyboards/axolstudio/helpo/keymaps/default/keymap.c

@@ -0,0 +1,32 @@
+/* Copyright 2020 kb-elmo
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Base */
+    [0] = LAYOUT(
+        KC_1,    KC_2,    KC_3,    KC_4,    KC_5,
+        KC_6,    KC_7,    KC_8,    KC_9,    KC_0,
+        KC_A,    KC_B,    KC_C,    KC_D,    KC_E,
+        KC_F,    KC_G,    KC_H,    KC_I,    MO(1)
+    ),
+    [1] = LAYOUT(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    )
+};

keyboards/axolstudio/helpo/keymaps/via/keymap.c

@@ -0,0 +1,44 @@
+/* Copyright 2020 kb-elmo
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Base */
+    [0] = LAYOUT(
+        KC_1,    KC_2,    KC_3,    KC_4,    KC_5,
+        KC_6,    KC_7,    KC_8,    KC_9,    KC_0,
+        KC_A,    KC_B,    KC_C,    KC_D,    KC_E,
+        KC_F,    KC_G,    KC_H,    KC_I,    MO(1)
+    ),
+    [1] = LAYOUT(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+    [2] = LAYOUT(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+    [3] = LAYOUT(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    )
+};

keyboards/axolstudio/helpo/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/axolstudio/helpo/readme.md

@@ -0,0 +1,17 @@
+# Helpo
+
+ATmega32A powered 20 key THT macropad
+
+* Keyboard Maintainer: [kb-elmo](https://github.com/kb-elmo)
+* Hardware Supported: Helpo PCB
+* Hardware Availability: will be added later
+
+Make example for this keyboard (after setting up your build environment):
+
+    make axolstudio/helpo:default
+
+Flashing example for this keyboard:
+
+    make axolstudio/helpo:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/axolstudio/helpo/rules.mk

@@ -0,0 +1,25 @@
+# MCU name
+MCU = atmega32a
+
+# Processor frequency
+F_CPU = 16000000
+
+# Bootloader selection
+BOOTLOADER = USBasp
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output

keyboards/boardsource/the_mark/config.h

@@ -0,0 +1,152 @@
+/*
+Copyright 2020 Boardsource
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0x4273 // "Bs" - Boardsource
+#define PRODUCT_ID   0x0001
+#define DEVICE_VER   0x0001
+#define MANUFACTURER Boardsource
+#define PRODUCT      The Mark65
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+
+#define MATRIX_ROW_PINS {B0, B1, B2, B3, B4,}
+#define MATRIX_COL_PINS { B5, B6, B7, F5, C7, D0, D1, D2, D3, D4, D5, D6, D7,F0, F1, F4}
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+#define RGBLIGHT_ANIMATIONS
+#define RGB_DI_PIN C6
+#ifdef RGBLIGHT_ENABLE
+#define RGBLED_NUM 24    // Number of LEDs
+#endif
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+//#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
+
+//#define BACKLIGHT_PIN B7
+//#define BACKLIGHT_LEVELS 3
+//#define BACKLIGHT_BREATHING
+
+//#define RGB_DI_PIN E2
+//#ifdef RGB_DI_PIN
+//#    define RGBLED_NUM 16
+//#    define RGBLIGHT_HUE_STEP 8
+//#    define RGBLIGHT_SAT_STEP 8
+//#    define RGBLIGHT_VAL_STEP 8
+//#    define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+//#    define RGBLIGHT_ANIMATIONS
+/*== or choose animations ==*/
+//#    define RGBLIGHT_EFFECT_BREATHING
+//#    define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//#    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//#    define RGBLIGHT_EFFECT_SNAKE
+//#    define RGBLIGHT_EFFECT_KNIGHT
+//#    define RGBLIGHT_EFFECT_CHRISTMAS
+//#    define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//#    define RGBLIGHT_EFFECT_RGB_TEST
+//#    define RGBLIGHT_EFFECT_ALTERNATING
+/*== customize breathing effect ==*/
+/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+/*==== use exp() and sin() ====*/
+//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+//#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0

keyboards/boardsource/the_mark/info.json

@@ -0,0 +1,232 @@
+{
+    "keyboard_name": "The Mark: 65",
+    "url": "",
+    "maintainer": "Boardsource",
+    "width": 16,
+    "height": 5,
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [
+                { "x": 0, "y": 0, "w": 1 },
+                { "x": 1, "y": 0, "w": 1 },
+                { "x": 2, "y": 0, "w": 1 },
+                { "x": 3, "y": 0, "w": 1 },
+                { "x": 4, "y": 0, "w": 1 },
+                { "x": 5, "y": 0, "w": 1 },
+                { "x": 6, "y": 0, "w": 1 },
+                { "x": 7, "y": 0, "w": 1 },
+                { "x": 8, "y": 0, "w": 1 },
+                { "x": 9, "y": 0, "w": 1 },
+                { "x": 10, "y": 0, "w": 1 },
+                { "x": 11, "y": 0, "w": 1 },
+                { "x": 12, "y": 0, "w": 1 },
+                { "x": 13, "y": 0, "w": 1 },
+                { "x": 14, "y": 0, "w": 1 },
+                { "x": 15.25, "y": 0, "w": 1 },
+                { "x": 0, "y": 1, "w": 1.5 },
+                { "x": 1.5, "y": 1, "w": 1 },
+                { "x": 2.5, "y": 1, "w": 1 },
+                { "x": 3.5, "y": 1, "w": 1 },
+                { "x": 4.5, "y": 1, "w": 1 },
+                { "x": 5.5, "y": 1, "w": 1 },
+                { "x": 6.5, "y": 1, "w": 1 },
+                { "x": 7.5, "y": 1, "w": 1 },
+                { "x": 8.5, "y": 1, "w": 1 },
+                { "x": 9.5, "y": 1, "w": 1 },
+                { "x": 10.5, "y": 1, "w": 1 },
+                { "x": 11.5, "y": 1, "w": 1 },
+                { "x": 12.5, "y": 1, "w": 1 },
+                { "x": 13.5, "y": 1, "w": 1.5 },
+                { "x": 15.25, "y": 1, "w": 1 },
+                { "x": 0, "y": 2, "w": 1.75 },
+                { "x": 1.75, "y": 2, "w": 1 },
+                { "x": 2.75, "y": 2, "w": 1 },
+                { "x": 3.75, "y": 2, "w": 1 },
+                { "x": 4.75, "y": 2, "w": 1 },
+                { "x": 5.75, "y": 2, "w": 1 },
+                { "x": 6.75, "y": 2, "w": 1 },
+                { "x": 7.75, "y": 2, "w": 1 },
+                { "x": 8.75, "y": 2, "w": 1 },
+                { "x": 9.75, "y": 2, "w": 1 },
+                { "x": 10.75, "y": 2, "w": 1 },
+                { "x": 11.75, "y": 2, "w": 1 },
+                { "x": 12.75, "y": 2, "w": 2.25 },
+                { "x": 15.25, "y": 2, "w": 1 },
+                { "x": 0, "y": 3, "w": 1.25 },
+                { "x": 1.25, "y": 3, "w": 1 },
+                { "x": 2.25, "y": 3, "w": 1 },
+                { "x": 3.25, "y": 3, "w": 1 },
+                { "x": 4.25, "y": 3, "w": 1 },
+                { "x": 5.25, "y": 3, "w": 1 },
+                { "x": 6.25, "y": 3, "w": 1 },
+                { "x": 7.25, "y": 3, "w": 1 },
+                { "x": 8.25, "y": 3, "w": 1 },
+                { "x": 9.25, "y": 3, "w": 1 },
+                { "x": 10.25, "y": 3, "w": 1 },
+                { "x": 11.25, "y": 3, "w": 1 },
+                { "x": 12.25, "y": 3, "w": 1.75 },
+                { "x": 14.25, "y": 3.25, "w": 1 },
+                { "x": 0, "y": 4, "w": 1.25 },
+                { "x": 1.25, "y": 4, "w": 1.25 },
+                { "x": 2.5, "y": 4, "w": 1.25 },
+                { "x": 3.75, "y": 4, "w": 2.25 },
+                { "x": 6, "y": 4, "w": 1.25 },
+                { "x": 7.25, "y": 4, "w": 2.75 },
+                { "x": 10, "y": 4, "w": 1 },
+                { "x": 11, "y": 4, "w": 1 },
+                { "x": 12, "y": 4, "w": 1 },
+                { "x": 13.25, "y": 4.25, "w": 1 },
+                { "x": 14.25, "y": 4.25, "w": 1 },
+                { "x": 15.25, "y": 4.25, "w": 1 }
+            ]
+        },
+        "LAYOUT_ansi": {
+            "layout": [
+                { "x": 0, "y": 0, "w": 1 },
+                { "x": 1, "y": 0, "w": 1 },
+                { "x": 2, "y": 0, "w": 1 },
+                { "x": 3, "y": 0, "w": 1 },
+                { "x": 4, "y": 0, "w": 1 },
+                { "x": 5, "y": 0, "w": 1 },
+                { "x": 6, "y": 0, "w": 1 },
+                { "x": 7, "y": 0, "w": 1 },
+                { "x": 8, "y": 0, "w": 1 },
+                { "x": 9, "y": 0, "w": 1 },
+                { "x": 10, "y": 0, "w": 1 },
+                { "x": 11, "y": 0, "w": 1 },
+                { "x": 12, "y": 0, "w": 1 },
+                { "x": 13, "y": 0, "w": 2 },
+                { "x": 15.25, "y": 0, "w": 1 },
+                { "x": 0, "y": 1, "w": 1.5 },
+                { "x": 1.5, "y": 1, "w": 1 },
+                { "x": 2.5, "y": 1, "w": 1 },
+                { "x": 3.5, "y": 1, "w": 1 },
+                { "x": 4.5, "y": 1, "w": 1 },
+                { "x": 5.5, "y": 1, "w": 1 },
+                { "x": 6.5, "y": 1, "w": 1 },
+                { "x": 7.5, "y": 1, "w": 1 },
+                { "x": 8.5, "y": 1, "w": 1 },
+                { "x": 9.5, "y": 1, "w": 1 },
+                { "x": 10.5, "y": 1, "w": 1 },
+                { "x": 11.5, "y": 1, "w": 1 },
+                { "x": 12.5, "y": 1, "w": 1 },
+                { "x": 13.5, "y": 1, "w": 1.5 },
+                { "x": 15.25, "y": 1, "w": 1 },
+                { "x": 0, "y": 2, "w": 1.75 },
+                { "x": 1.75, "y": 2, "w": 1 },
+                { "x": 2.75, "y": 2, "w": 1 },
+                { "x": 3.75, "y": 2, "w": 1 },
+                { "x": 4.75, "y": 2, "w": 1 },
+                { "x": 5.75, "y": 2, "w": 1 },
+                { "x": 6.75, "y": 2, "w": 1 },
+                { "x": 7.75, "y": 2, "w": 1 },
+                { "x": 8.75, "y": 2, "w": 1 },
+                { "x": 9.75, "y": 2, "w": 1 },
+                { "x": 10.75, "y": 2, "w": 1 },
+                { "x": 11.75, "y": 2, "w": 1 },
+                { "x": 12.75, "y": 2, "w": 2.25 },
+                { "x": 15.25, "y": 2, "w": 1 },
+                { "x": 0, "y": 3, "w": 2.25 },
+                { "x": 2.25, "y": 3, "w": 1 },
+                { "x": 3.25, "y": 3, "w": 1 },
+                { "x": 4.25, "y": 3, "w": 1 },
+                { "x": 5.25, "y": 3, "w": 1 },
+                { "x": 6.25, "y": 3, "w": 1 },
+                { "x": 7.25, "y": 3, "w": 1 },
+                { "x": 8.25, "y": 3, "w": 1 },
+                { "x": 9.25, "y": 3, "w": 1 },
+                { "x": 10.25, "y": 3, "w": 1 },
+                { "x": 11.25, "y": 3, "w": 1 },
+                { "x": 12.25, "y": 3, "w": 1.75 },
+                { "x": 14.25, "y": 3.25, "w": 1 },
+                { "x": 0, "y": 4, "w": 1.25 },
+                { "x": 1.25, "y": 4, "w": 1.25 },
+                { "x": 2.5, "y": 4, "w": 1.25 },
+                { "x": 3.75, "y": 4, "w": 6.25 },
+                { "x": 10, "y": 4, "w": 1 },
+                { "x": 11, "y": 4, "w": 1 },
+                { "x": 12, "y": 4, "w": 1 },
+                { "x": 13.25, "y": 4.25, "w": 1 },
+                { "x": 14.25, "y": 4.25, "w": 1 },
+                { "x": 15.25, "y": 4.25, "w": 1 }
+            ]
+        },
+        "LAYOUT_iso": {
+            "layout": [
+                { "x": 0, "y": 0, "w": 1 },
+                { "x": 1, "y": 0, "w": 1 },
+                { "x": 2, "y": 0, "w": 1 },
+                { "x": 3, "y": 0, "w": 1 },
+                { "x": 4, "y": 0, "w": 1 },
+                { "x": 5, "y": 0, "w": 1 },
+                { "x": 6, "y": 0, "w": 1 },
+                { "x": 7, "y": 0, "w": 1 },
+                { "x": 8, "y": 0, "w": 1 },
+                { "x": 9, "y": 0, "w": 1 },
+                { "x": 10, "y": 0, "w": 1 },
+                { "x": 11, "y": 0, "w": 1 },
+                { "x": 12, "y": 0, "w": 1 },
+                { "x": 13, "y": 0, "w": 2 },
+                { "x": 15.25, "y": 0, "w": 1 },
+                { "x": 0, "y": 1, "w": 1.5 },
+                { "x": 1.5, "y": 1, "w": 1 },
+                { "x": 2.5, "y": 1, "w": 1 },
+                { "x": 3.5, "y": 1, "w": 1 },
+                { "x": 4.5, "y": 1, "w": 1 },
+                { "x": 5.5, "y": 1, "w": 1 },
+                { "x": 6.5, "y": 1, "w": 1 },
+                { "x": 7.5, "y": 1, "w": 1 },
+                { "x": 8.5, "y": 1, "w": 1 },
+                { "x": 9.5, "y": 1, "w": 1 },
+                { "x": 10.5, "y": 1, "w": 1 },
+                { "x": 11.5, "y": 1, "w": 1 },
+                { "x": 12.5, "y": 1, "w": 1 },
+                { "x": 15.25, "y": 1, "w": 1 },
+                { "x": 0, "y": 2, "w": 1.75 },
+                { "x": 1.75, "y": 2, "w": 1 },
+                { "x": 2.75, "y": 2, "w": 1 },
+                { "x": 3.75, "y": 2, "w": 1 },
+                { "x": 4.75, "y": 2, "w": 1 },
+                { "x": 5.75, "y": 2, "w": 1 },
+                { "x": 6.75, "y": 2, "w": 1 },
+                { "x": 7.75, "y": 2, "w": 1 },
+                { "x": 8.75, "y": 2, "w": 1 },
+                { "x": 9.75, "y": 2, "w": 1 },
+                { "x": 10.75, "y": 2, "w": 1 },
+                { "x": 11.75, "y": 2, "w": 1 },
+                { "x": 12.75, "y": 2, "w": 1 },
+                {
+                    "x": 13.75,
+                    "y": 1,
+                    "w": 1.25,
+                    "h": 2
+                },
+                { "x": 15.25, "y": 2, "w": 1 },
+                { "x": 0, "y": 3, "w": 1.25 },
+                { "x": 1.25, "y": 3, "w": 1 },
+                { "x": 2.25, "y": 3, "w": 1 },
+                { "x": 3.25, "y": 3, "w": 1 },
+                { "x": 4.25, "y": 3, "w": 1 },
+                { "x": 5.25, "y": 3, "w": 1 },
+                { "x": 6.25, "y": 3, "w": 1 },
+                { "x": 7.25, "y": 3, "w": 1 },
+                { "x": 8.25, "y": 3, "w": 1 },
+                { "x": 9.25, "y": 3, "w": 1 },
+                { "x": 10.25, "y": 3, "w": 1 },
+                { "x": 11.25, "y": 3, "w": 1 },
+                { "x": 12.25, "y": 3, "w": 1.75 },
+                { "x": 14.25, "y": 3.25, "w": 1 },
+                { "x": 0, "y": 4, "w": 1.25 },
+                { "x": 1.25, "y": 4, "w": 1.25 },
+                { "x": 2.5, "y": 4, "w": 1.25 },
+                { "x": 3.75, "y": 4, "w": 6.25 },
+                { "x": 10, "y": 4, "w": 1 },
+                { "x": 11, "y": 4, "w": 1 },
+                { "x": 12, "y": 4, "w": 1 },
+                { "x": 13.25, "y": 4.25, "w": 1 },
+                { "x": 14.25, "y": 4.25, "w": 1 },
+                { "x": 15.25, "y": 4.25, "w": 1 }
+            ]
+        }
+    }
+}

keyboards/boardsource/the_mark/keymaps/default/keymap.c

@@ -0,0 +1,44 @@
+/* Copyright 2020 Boardsource
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _FN
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Base */
+    [_BASE] = LAYOUT_all(
+		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC, RGB_TOG, 
+		KC_TAB,           KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, RGB_MOD, 
+		KC_LCTL,          KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  MO(_FN), 
+		KC_LSFT, KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_LSFT,          KC_UP,   
+		KC_LCTL, KC_LGUI, KC_LALT,          KC_SPC,           KC_SPC,           KC_SPC,           KC_LALT, KC_LCTL, KC_GRV,  KC_LEFT, KC_DOWN, KC_RGHT
+	),
+[_FN] = LAYOUT_all(
+  KC_GRV,      KC_F1,     KC_F2,      KC_F3,      KC_F4,      KC_F5,      KC_F6,      KC_F7,      KC_F8,      KC_F9,      KC_F10,     KC_F11,     KC_F12,     _______,    _______,    KC_HOME,
+  _______,                _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    KC_MPLY,    KC_VOLD,    KC_VOLU,    KC_MUTE,    KC_END,
+  RESET,                  _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,                _______,    _______,
+  _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,                _______,    
+  _______,    _______,    _______,                _______,                _______,                _______,                _______,    _______,    _______,    _______,    _______,    _______
+)
+
+
+};
+

keyboards/boardsource/the_mark/keymaps/default_ansi/keymap.c

@@ -0,0 +1,44 @@
+/* Copyright 2020 Boardsource
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _FN
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Base */
+    [_BASE] = LAYOUT_ansi(
+		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,          RGB_TOG, 
+		KC_TAB,           KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, RGB_MOD, 
+		KC_LCTL,          KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,           MO(_FN), 
+		         KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_LSFT,          KC_UP,   
+		KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_LALT, KC_LCTL, KC_GRV,  KC_LEFT, KC_DOWN, KC_RGHT
+	),
+[_FN] = LAYOUT_ansi(
+  KC_GRV,      KC_F1,     KC_F2,      KC_F3,      KC_F4,      KC_F5,      KC_F6,      KC_F7,      KC_F8,      KC_F9,      KC_F10,     KC_F11,     KC_F12,   _______,                  KC_HOME,
+  _______,                _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    KC_MPLY,    KC_VOLD,  KC_VOLU,  _______,        KC_END,
+  RESET,                  _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,  KC_MUTE,                  _______,
+              _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,            _______,    
+  _______,    _______,    _______,                                        _______,                                        _______,    _______,    _______,  _______,  _______,    _______
+)
+
+
+};
+

keyboards/boardsource/the_mark/keymaps/default_iso/keymap.c

@@ -0,0 +1,44 @@
+/* Copyright 2020 Boardsource
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _FN
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Base */
+    [_BASE] = LAYOUT_iso(
+		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,          RGB_TOG, 
+		KC_TAB,           KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,          RGB_MOD, 
+		KC_LCTL,          KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,  MO(_FN), 
+		KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_LSFT,          KC_UP,   
+		KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_LALT, KC_LCTL, KC_GRV,  KC_LEFT, KC_DOWN, KC_RGHT
+	),
+[_FN] = LAYOUT_iso(
+  KC_GRV,      KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   _______,           KC_HOME,
+  _______,                _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    KC_MPLY,  KC_VOLD,  KC_VOLU,                  KC_END,
+  RESET,                  _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,KC_MUTE,     _______,    _______,
+  _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,             _______,    
+  _______,    _______,    _______,                                        _______,                                        _______,    _______,    _______,    _______,  _______,    _______
+)
+
+
+};
+

keyboards/boardsource/the_mark/keymaps/via/keymap.c

@@ -0,0 +1,54 @@
+/* Copyright 2020 Boardsource
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Base */
+    LAYOUT_all(
+		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC, RGB_TOG, 
+		KC_TAB,           KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, 
+		KC_LCTL,          KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  KC_PGUP, 
+		KC_LSFT, KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_LSFT,          KC_UP,   
+		KC_LCTL, KC_LGUI, KC_LALT,          KC_SPC,           KC_SPC,           KC_SPC,           KC_LALT, KC_LCTL, KC_GRV,  KC_LEFT, KC_DOWN, KC_RGHT
+	),
+LAYOUT_all(
+  KC_GRV,      KC_F1,     KC_F2,      KC_F3,      KC_F4,      KC_F5,      KC_F6,      KC_F7,      KC_F8,      KC_F9,      KC_F10,     KC_F11,     KC_F12,     _______,    _______,    KC_HOME,
+  _______,                _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    KC_MPLY,    KC_VOLD,    KC_VOLU,    KC_MUTE,    KC_END,
+  RESET,                  _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,                _______,    _______,
+  _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,                _______,    
+  _______,    _______,    _______,                _______,                _______,                _______,                _______,    _______,    _______,    _______,    _______,    _______
+),
+LAYOUT_all(
+  _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,
+  _______,                _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,
+  _______,                _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,                _______,    _______,
+  _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,                _______,    
+  _______,    _______,    _______,                _______,                _______,                _______,                _______,    _______,    _______,    _______,    _______,    _______
+),
+LAYOUT_all(
+  _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,
+  _______,                _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,
+  _______,                _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,                _______,    _______,
+  _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,                _______,    
+  _______,    _______,    _______,                _______,                _______,                _______,                _______,    _______,    _______,    _______,    _______,    _______
+)
+
+
+
+};
+

keyboards/boardsource/the_mark/keymaps/via/readme.md

@@ -0,0 +1,3 @@
+# The via keymap for The Mark: 65
+
+This folder contains the VIA configuration for the boardsource's The Mark: 65 

keyboards/boardsource/the_mark/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/boardsource/the_mark/readme.md

@@ -0,0 +1,19 @@
+# the_mark
+
+![The Mark: 65](https://i.imgur.com/3zC4PKkl.jpg)
+
+The Mark: 65 is a no compromise 65% keyboard designed and produced by Boardsource. 
+
+* Keyboard Maintainer: [Boardsource](https://github.com/boardsource)
+* Hardware Supported: The Mark:65 v1
+* Hardware Availability: [Boardsource](https://boardsource.xyz/store/5fc2eb0b86b9341522d8f7a3)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make boardsource/the_mark:default
+
+Flashing example for this keyboard:
+
+    make boardsource/the_mark:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/boardsource/the_mark/rules.mk

@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output

keyboards/boardsource/the_mark/the_mark.c

@@ -0,0 +1,17 @@
+/* Copyright 2020 Boardsource
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "the_mark.h"

keyboards/boardsource/the_mark/the_mark.h

@@ -0,0 +1,71 @@
+/* Copyright 2020 Boardsource
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_all( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \
+	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \
+	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       K215, \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314,       \
+	K400, K401,       K403, K404,       K406,       K408,       K410, K411, K412, K413, K414, K415  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014,  K015 }, \
+	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114,  K115 }, \
+	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO, K215 }, \
+	{ K301,  K300,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO, K313,  K314,  KC_NO}, \
+	{ K400,  K401,  KC_NO, K403,  K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  K412,  K413,  K414,  K415 }  \
+}
+
+#define LAYOUT_ansi( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013,       K015, \
+	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \
+	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       K215, \
+	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314,       \
+	K400, K401,       K403,             K406,                   K410, K411, K412, K413, K414, K415  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  KC_NO, K015 }, \
+	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114,  K115 }, \
+	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO, K215 }, \
+	{ KC_NO, K300,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO, K313,  K314,  KC_NO}, \
+	{ K400,  K401,  KC_NO, K403,  KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, K410,  K411,  K412,  K413,  K414,  K415 }  \
+}
+
+
+#define LAYOUT_iso( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013,       K015, \
+	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113,       K115, \
+	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K114, K213, K215, \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314,       \
+	K400, K401,       K403,             K406,                   K410, K411, K412, K413, K414, K415  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  KC_NO, K015 }, \
+	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114,  K115 }, \
+	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO, K215 }, \
+	{ K301,  K300,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO, K313,  K314,  KC_NO}, \
+	{ K400,  K401,  KC_NO, K403,  KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, K410,  K411,  K412,  K413,  K414,  K415 }  \
+}
+

keyboards/cannonkeys/tsukuyomi/chconf.h

@@ -0,0 +1,714 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    rt/templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+#define _CHIBIOS_RT_CONF_VER_6_0_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_ST_RESOLUTION)
+#define CH_CFG_ST_RESOLUTION                32
+#endif
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#if !defined(CH_CFG_ST_FREQUENCY)
+#define CH_CFG_ST_FREQUENCY                 10000
+#endif
+
+/**
+ * @brief   Time intervals data size.
+ * @note    Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE               32
+#endif
+
+/**
+ * @brief   Time types data size.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE              32
+#endif
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#if !defined(CH_CFG_ST_TIMEDELTA)
+#define CH_CFG_ST_TIMEDELTA                 2
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM                 0
+#endif
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#if !defined(CH_CFG_MEMCORE_SIZE)
+#define CH_CFG_MEMCORE_SIZE                 0
+#endif
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#if !defined(CH_CFG_NO_IDLE_THREAD)
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
+#define CH_CFG_OPTIMIZE_SPEED               FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_TM)
+#define CH_CFG_USE_TM                       FALSE
+#endif
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_REGISTRY)
+#define CH_CFG_USE_REGISTRY                 TRUE
+#endif
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_WAITEXIT)
+#define CH_CFG_USE_WAITEXIT                 TRUE
+#endif
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES)
+#define CH_CFG_USE_SEMAPHORES               TRUE
+#endif
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+#endif
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MUTEXES)
+#define CH_CFG_USE_MUTEXES                  TRUE
+#endif
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+#endif
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_CONDVARS)
+#define CH_CFG_USE_CONDVARS                 TRUE
+#endif
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
+#define CH_CFG_USE_CONDVARS_TIMEOUT         FALSE
+#endif
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_EVENTS)
+#define CH_CFG_USE_EVENTS                   TRUE
+#endif
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+#endif
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MESSAGES)
+#define CH_CFG_USE_MESSAGES                 TRUE
+#endif
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+#endif
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_MAILBOXES)
+#define CH_CFG_USE_MAILBOXES                TRUE
+#endif
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMCORE)
+#define CH_CFG_USE_MEMCORE                  TRUE
+#endif
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#if !defined(CH_CFG_USE_HEAP)
+#define CH_CFG_USE_HEAP                     FALSE
+#endif
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMPOOLS)
+#define CH_CFG_USE_MEMPOOLS                 FALSE
+#endif
+
+/**
+ * @brief   Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS                FALSE
+#endif
+
+/**
+ * @brief   Pipes APIs.
+ * @details If enabled then the pipes APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_PIPES)
+#define CH_CFG_USE_PIPES                    FALSE
+#endif
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#if !defined(CH_CFG_USE_DYNAMIC)
+#define CH_CFG_USE_DYNAMIC                  FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ *          kernel.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY                  FALSE
+#endif
+
+/**
+ * @brief   Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ *          pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH     8
+#endif
+
+/**
+ * @brief   Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY     FALSE
+#endif
+
+/**
+ * @brief   Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS      FALSE
+#endif
+
+/**
+ * @brief   Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES           FALSE
+#endif
+
+/**
+ * @brief   Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES            FALSE
+#endif
+
+/**
+ * @brief   Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS            FALSE
+#endif
+
+/**
+ * @brief   Enables factory for Pipes.
+ */
+#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
+#define CH_CFG_FACTORY_PIPES                FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_STATISTICS)
+#define CH_DBG_STATISTICS                   FALSE
+#endif
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+#endif
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_CHECKS)
+#define CH_DBG_ENABLE_CHECKS                FALSE
+#endif
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_ASSERTS)
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+#endif
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+#endif
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+#endif
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+#endif
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#if !defined(CH_DBG_FILL_THREADS)
+#define CH_DBG_FILL_THREADS                 FALSE
+#endif
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#if !defined(CH_DBG_THREADS_PROFILING)
+#define CH_DBG_THREADS_PROFILING            FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ *          just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() {                                         \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p _thread_init() function.
+ *
+ * @note    It is invoked from within @p _thread_init() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */

keyboards/cannonkeys/tsukuyomi/config.h

@@ -0,0 +1,77 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xCA04
+#define PRODUCT_ID      0x0002
+#define DEVICE_VER      0x0001
+#define MANUFACTURER CannonKeys
+#define PRODUCT Tsukuyomi
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 17
+
+#define MATRIX_COL_PINS { A7, A5, B10, A3, A2, B0, A9, C13, B9, B8, B7, B6, B5, B4, B3, A15, A14 }
+#define MATRIX_ROW_PINS { B12, B11, B14, A8, A1 }
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN           A6
+#define BACKLIGHT_PWM_DRIVER    PWMD3
+#define BACKLIGHT_PWM_CHANNEL   1
+#define BACKLIGHT_PAL_MODE      1
+#define BACKLIGHT_LEVELS 6
+#define BACKLIGHT_BREATHING
+#define BREATHING_PERIOD 6
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define RGBLIGHT_ANIMATIONS
+#define RGB_DI_PIN B15
+#define RGBLED_NUM 20
+#define WS2812_SPI SPID2
+#define WS2812_SPI_MOSI_PAL_MODE 0
+
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION

keyboards/cannonkeys/tsukuyomi/halconf.h

@@ -0,0 +1,525 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef HALCONF_H
+#define HALCONF_H
+
+#define _CHIBIOS_HAL_CONF_
+#define _CHIBIOS_HAL_CONF_VER_7_0_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                         TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                         FALSE
+#endif
+
+/**
+ * @brief   Enables the cryptographic subsystem.
+ */
+#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
+#define HAL_USE_CRY                         FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                         FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                         FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                         FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                         FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI                     FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                         TRUE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                         FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL                      FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB                  FALSE
+#endif
+
+/**
+ * @brief   Enables the SIO subsystem.
+ */
+#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
+#define HAL_USE_SIO                         FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                         TRUE
+#endif
+
+/**
+ * @brief   Enables the TRNG subsystem.
+ */
+#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
+#define HAL_USE_TRNG                        FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                        FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                         TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                         FALSE
+#endif
+
+/**
+ * @brief   Enables the WSPI subsystem.
+ */
+#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
+#define HAL_USE_WSPI                        FALSE
+#endif
+
+/*===========================================================================*/
+/* PAL driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define PAL_USE_CALLBACKS                   FALSE
+#endif
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
+#define PAL_USE_WAIT                        FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                        TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE                  TRUE
+#endif
+
+/**
+ * @brief   Enforces the driver to use direct callbacks rather than OSAL events.
+ */
+#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
+#define CAN_ENFORCE_USE_CALLBACKS           FALSE
+#endif
+
+/*===========================================================================*/
+/* CRY driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the SW fall-back of the cryptographic driver.
+ * @details When enabled, this option, activates a fall-back software
+ *          implementation for algorithms not supported by the underlying
+ *          hardware.
+ * @note    Fall-back implementations may not be present for all algorithms.
+ */
+#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_USE_FALLBACK                FALSE
+#endif
+
+/**
+ * @brief   Makes the driver forcibly use the fall-back implementations.
+ */
+#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_ENFORCE_FALLBACK            FALSE
+#endif
+
+/*===========================================================================*/
+/* DAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
+#define DAC_USE_WAIT                        TRUE
+#endif
+
+/**
+ * @brief   Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define DAC_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the zero-copy API.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY                   FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS                      TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING                    TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY                      100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT                     FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING                    TRUE
+#endif
+
+/**
+ * @brief   OCR initialization constant for V20 cards.
+ */
+#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
+#define SDC_INIT_OCR_V20                    0x50FF8000U
+#endif
+
+/**
+ * @brief   OCR initialization constant for non-V20 cards.
+ */
+#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
+#define SDC_INIT_OCR                        0x80100000U
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE              38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE                 16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE             1
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER           2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                        TRUE
+#endif
+
+/**
+ * @brief   Enables circular transfers APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
+#define SPI_USE_CIRCULAR                    FALSE
+#endif
+
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION            TRUE
+#endif
+
+/**
+ * @brief   Handling method for SPI CS line.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
+#define SPI_SELECT_MODE                     SPI_SELECT_MODE_PAD
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT                       FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION           FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                        TRUE
+#endif
+
+/*===========================================================================*/
+/* WSPI driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
+#define WSPI_USE_WAIT                       TRUE
+#endif
+
+/**
+ * @brief   Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define WSPI_USE_MUTUAL_EXCLUSION           TRUE
+#endif
+
+#endif /* HALCONF_H */
+
+/** @} */

keyboards/cannonkeys/tsukuyomi/info.json

@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "Tsukuyomi",
+    "url": "https://cannonkeys.com",
+    "maintainer": "awkannan",
+    "width": 17.25,
+    "height": 5,
+    "layouts": {
+        "LAYOUT_default": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"~", "x":1.25, "y":0}, {"label":"!", "x":2.25, "y":0}, {"label":"@", "x":3.25, "y":0}, {"label":"#", "x":4.25, "y":0}, {"label":"$", "x":5.25, "y":0}, {"label":"%", "x":6.25, "y":0}, {"label":"^", "x":7.25, "y":0}, {"label":"&", "x":8.25, "y":0}, {"label":"*", "x":9.25, "y":0}, {"label":"(", "x":10.25, "y":0}, {"label":")", "x":11.25, "y":0}, {"label":"_", "x":12.25, "y":0}, {"label":"+", "x":13.25, "y":0}, {"x":14.25, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":0, "y":1}, {"label":"Tab", "x":1.25, "y":1, "w":1.5}, {"label":"Q", "x":2.75, "y":1}, {"label":"W", "x":3.75, "y":1}, {"label":"E", "x":4.75, "y":1}, {"label":"R", "x":5.75, "y":1}, {"label":"T", "x":6.75, "y":1}, {"label":"Y", "x":7.75, "y":1}, {"label":"U", "x":8.75, "y":1}, {"label":"I", "x":9.75, "y":1}, {"label":"O", "x":10.75, "y":1}, {"label":"P", "x":11.75, "y":1}, {"label":"{", "x":12.75, "y":1}, {"label":"}", "x":13.75, "y":1}, {"label":"|", "x":14.75, "y":1, "w":1.5}, {"x":16.25, "y":1}, {"x":0, "y":2}, {"label":"Caps Lock", "x":1.25, "y":2, "w":1.75}, {"label":"A", "x":3, "y":2}, {"label":"S", "x":4, "y":2}, {"label":"D", "x":5, "y":2}, {"label":"F", "x":6, "y":2}, {"label":"G", "x":7, "y":2}, {"label":"H", "x":8, "y":2}, {"label":"J", "x":9, "y":2}, {"label":"K", "x":10, "y":2}, {"label":"L", "x":11, "y":2}, {"label":":", "x":12, "y":2}, {"label":"\"", "x":13, "y":2}, {"x":14, "y":2}, {"label":"Enter", "x":15, "y":2, "w":1.25}, {"x":16.25, "y":2}, {"x":0, "y":3}, {"x":1.25, "y":3, "w":1.25}, {"x":2.5, "y":3}, {"label":"Z", "x":3.5, "y":3}, {"label":"X", "x":4.5, "y":3}, {"label":"C", "x":5.5, "y":3}, {"label":"V", "x":6.5, "y":3}, {"label":"B", "x":7.5, "y":3}, {"label":"N", "x":8.5, "y":3}, {"label":"M", "x":9.5, "y":3}, {"label":"<", "x":10.5, "y":3}, {"label":">", "x":11.5, "y":3}, {"label":"?", "x":12.5, "y":3}, {"label":"Shift", "x":13.5, "y":3, "w":1.75}, {"x":15.25, "y":3}, {"x":16.25, "y":3}, {"x":0, "y":4}, {"label":"Ctrl", "x":1.25, "y":4, "w":1.25}, {"label":"Win", "x":2.5, "y":4, "w":1.25}, {"label":"Alt", "x":3.75, "y":4, "w":1.25}, {"x":5, "y":4, "w":6.25}, {"label":"Alt", "x":11.25, "y":4, "w":1.25}, {"label":"Ctrl", "x":12.5, "y":4, "w":1.25}, {"x":14.25, "y":4}, {"x":15.25, "y":4}, {"x":16.25, "y":4}]
+        }
+    }
+}

keyboards/cannonkeys/tsukuyomi/keymaps/default/keymap.c

@@ -0,0 +1,46 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum layer_names {
+    _BASE,
+    _FN1,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[_BASE] = LAYOUT_default(
+		KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_INS,
+		KC_F1,  KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
+		KC_F2,  KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUBS, KC_ENT, KC_PGUP,
+		KC_F3,  KC_LSFT, KC_NUHS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
+		KC_F4,  KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_FN1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    [_FN1] = LAYOUT_default(
+		KC_ESC, KC_GESC, KC_F1,   KC_F2, KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL, KC_TRNS, RGB_TOG,
+		KC_F5,  KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD,
+		KC_F6,  BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_F7,  BL_INC,  BL_DEC,  BL_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_F8,  KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS
+    )
+};

keyboards/cannonkeys/tsukuyomi/keymaps/via/keymap.c

@@ -0,0 +1,65 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum layer_names {
+    _BASE,
+    _FN1,
+    _FN2,
+    _FN3
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[_BASE] = LAYOUT_default(
+		KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_INS,
+		KC_F1,  KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
+		KC_F2,  KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUBS, KC_ENT, KC_PGUP,
+		KC_F3,  KC_LSFT, KC_NUHS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
+		KC_F4,  KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_FN1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    [_FN1] = LAYOUT_default(
+		KC_ESC, KC_GESC, KC_F1,   KC_F2, KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL, KC_TRNS, RGB_TOG,
+		KC_F5,  KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD,
+		KC_F6,  BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_F7,  BL_INC,  BL_DEC,  BL_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_F8,  KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS
+    ),
+
+    [_FN2] = LAYOUT_default(
+		KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS, KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+
+    [_FN3] = LAYOUT_default(
+		KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS, KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    )
+};

keyboards/cannonkeys/tsukuyomi/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/cannonkeys/tsukuyomi/mcuconf.h

@@ -0,0 +1,176 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+// #define STM32F070xB
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_HSI14_ENABLED                 TRUE
+#define STM32_HSI48_ENABLED                 FALSE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  12
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE                          STM32_PPRE_DIV1
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_ADCSW                         STM32_ADCSW_HSI14
+#define STM32_USBSW                         STM32_USBSW_HSI48
+#define STM32_CECSW                         STM32_CECSW_HSI
+#define STM32_I2C1SW                        STM32_I2C1SW_HSI
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_IRQ_PRIORITY              2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY     3
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       3
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       3
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         2
+#define STM32_GPT_TIM2_IRQ_PRIORITY         2
+#define STM32_GPT_TIM3_IRQ_PRIORITY         2
+#define STM32_GPT_TIM14_IRQ_PRIORITY        2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         3
+#define STM32_I2C_I2C2_IRQ_PRIORITY         3
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         3
+#define STM32_ICU_TIM2_IRQ_PRIORITY         3
+#define STM32_ICU_TIM3_IRQ_PRIORITY         3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  TRUE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         3
+#define STM32_PWM_TIM2_IRQ_PRIORITY         3
+#define STM32_PWM_TIM3_IRQ_PRIORITY         3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        3
+#define STM32_SERIAL_USART2_PRIORITY        3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  TRUE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               2
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      3
+#define STM32_UART_USART2_IRQ_PRIORITY      3
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      3
+
+#endif /* _MCUCONF_H_ */

keyboards/cannonkeys/tsukuyomi/readme.md

@@ -0,0 +1,12 @@
+# Tsukuyomi
+
+Tsukuyomi Keyboard by persocom
+
+* Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan)
+* Hardware Supported: STM32F072CBT6 / APM32F072CBT6
+
+Make example for this keyboard (after setting up your build environment):
+
+    make cannonkeys/tsukuyomi:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/cannonkeys/tsukuyomi/rules.mk

@@ -0,0 +1,26 @@
+# MCU name
+MCU = STM32F072
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = yes      # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+WS2812_DRIVER = spi
+
+# Wildcard to allow APM32 MCU 
+DFU_SUFFIX_ARGS = -p FFFF -v FFFF
+
+# Enter lower-power sleep mode when on the ChibiOS idle thread
+OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

keyboards/cannonkeys/tsukuyomi/tsukuyomi.c

@@ -0,0 +1,17 @@
+ /* Copyright 2020 Andrew Kannan
+  *
+  * This program is free software: you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+  * the Free Software Foundation, either version 2 of the License, or
+  * (at your option) any later version.
+  *
+  * This program is distributed in the hope that it will be useful,
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  * GNU General Public License for more details.
+  *
+  * You should have received a copy of the GNU General Public License
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+  */
+
+#include "tsukuyomi.h"

keyboards/cannonkeys/tsukuyomi/tsukuyomi.h

@@ -0,0 +1,33 @@
+ /* Copyright 2020 Andrew Kannan
+  *
+  * This program is free software: you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+  * the Free Software Foundation, either version 2 of the License, or
+  * (at your option) any later version.
+  *
+  * This program is distributed in the hope that it will be useful,
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  * GNU General Public License for more details.
+  *
+  * You should have received a copy of the GNU General Public License
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+  */
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_default( \
+	K00M, K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \
+	K10M, K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113,       K115, \
+	K20M, K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       K215, \
+	K30M, K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313,       K315, \
+	K40M, K400, K401, K402,                   K406,                   K410, K411, K412, K413,       K415  \
+) { \
+	{ K00M,  K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014,  K015 }, \
+	{ K10M,  K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  KC_NO, K115 }, \
+	{ K20M,  K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO, K215 }, \
+	{ K30M,  K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313,  KC_NO, K315 }, \
+	{ K40M,  K400,  K401,  K402,  KC_NO, KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO,  K410,  K411,  K412,  K413,  KC_NO, K415 }  \
+}

keyboards/choco60/choco60.c

@@ -13,39 +13,5 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
+
 #include "choco60.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-/*
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}
-
-*/

keyboards/choco60/config.h

@@ -20,36 +20,16 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xC0C0
-#define PRODUCT_ID      0x6000
+#define VENDOR_ID       0x524B // recompile keys
+#define PRODUCT_ID      0x4362 // Choco60
 #define DEVICE_VER      0x0001
-#define MANUFACTURER    Naoto Takai
-#define PRODUCT         choco60
-#define DESCRIPTION     A 60% split keyboard for programmers.
+#define MANUFACTURER    recompile keys
+#define PRODUCT         Choco60
 
 /* key matrix size */
 #define MATRIX_ROWS 10
 #define MATRIX_COLS 9
 
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, D1 }
-#define UNUSED_PINS
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-#define SOFT_SERIAL_PIN D3 // or D1, D2, D3, E6
-#define SPLIT_HAND_PIN D0
+/* Bootmagic Lite key configuration */
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 0

keyboards/choco60/keymaps/via/keymap.c

@@ -0,0 +1,48 @@
+/* Copyright 2019 Naoto Takai
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT(
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,     KC_7,    KC_8,    KC_9,   KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,     KC_U,    KC_I,    KC_O,   KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
+    KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,     KC_J,    KC_K,    KC_L,   KC_SCLN, KC_QUOT, KC_ENT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,     KC_M,    KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1),
+    KC_LALT, KC_LGUI, KC_SPC,  KC_SPC,  KC_SPC,  KC_RGUI, KC_RALT
+  ),
+  [1] = LAYOUT(
+    _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_INS,  KC_DEL,
+    KC_CAPS, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP,   _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, KC_END,  KC_PGDN, KC_DOWN, _______, _______,
+    _______, _______, _______, _______, _______, KC_STOP, RESET
+  ),
+  [2] = LAYOUT(
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______
+  ),
+  [3] = LAYOUT(
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______
+  )
+};

keyboards/choco60/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/choco60/readme.md

@@ -1,15 +1,17 @@
-# choco60
-
-![choco60](https://keys.recompile.net/images/choco60-main@600w.jpg)
+# Choco60
 
 A 60% split keyboard for programmers.
 
-Keyboard Maintainer: [Naoto Takai](https://github.com/takai)  
-Hardware Supported: The Choco60 PCBs, Pro Micro supported  
-Hardware Availability: https://keys.recompile.net/projects/choco60/
+1. [Rev.1](rev2/): Pro Micro supported.
+2. [Rev.2](rev2/): Atmega32u2, USB-C supported.
+
+* Keyboard Maintainer: [Naoto Takai](https://github.com/takai)
+* Hardware Supported: Choco60 PCB Rev1, Rev.2
+* Hardware Availability: https://keys.recompile.net/projects/choco60/
 
 Make example for this keyboard (after setting up your build environment):
 
-    make choco60:default
+    make choco60/rev1:default
+    make choco60/rev2:default
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/choco60/rev1/config.h

@@ -0,0 +1,41 @@
+/*
+Copyright 2019 Naoto Takai
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, D1 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D3 // or D1, D2, D3, E6
+#define SPLIT_HAND_PIN D0

keyboards/choco60/rev1/readme.md

@@ -0,0 +1,15 @@
+# Choco60
+
+![choco60](https://keys.recompile.net/images/choco60-main@600w.jpg)
+
+A 60% split keyboard for programmers.
+
+* Keyboard Maintainer: [Naoto Takai](https://github.com/takai)
+* Hardware Supported: Choco60 PCB, Pro Micro supported
+* Hardware Availability: https://keys.recompile.net/projects/choco60/
+
+Make example for this keyboard (after setting up your build environment):
+
+    make choco60/rev1:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/choco60/rev1/rev1.c

@@ -0,0 +1,17 @@
+/* Copyright 2019 Naoto Takai
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "rev1.h"

keyboards/choco60/rev1/rev1.h

@@ -0,0 +1,19 @@
+/* Copyright 2020 Naoto Takai
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"

keyboards/choco60/rev1/rules.mk

@@ -0,0 +1,24 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no        # Console for debug
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+
+SPLIT_KEYBOARD = yes        # Enable split keyboard

keyboards/choco60/rev2/config.h

@@ -0,0 +1,45 @@
+/*
+Copyright 2020 Naoto Takai
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { C5, C4, B6, B7, C7 }
+#define MATRIX_ROW_PINS_RIGHT { D3, D2, D5, D6, B0 }
+#define MATRIX_COL_PINS { C6, B4, B3, B2, B1, B0 }
+#define MATRIX_COL_PINS_RIGHT { C7, B7, B6, B5, B4, B3, B2, C6, D4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0
+#define SPLIT_HAND_PIN D1
+
+#define SPLIT_USB_DETECT

keyboards/choco60/rev2/readme.md

@@ -0,0 +1,15 @@
+# Choco60 Rev.2
+
+![choco60](https://keys.recompile.net/images/choco60-main@600w.jpg)
+
+A 60% split keyboard for programmers.
+
+* Keyboard Maintainer: [Naoto Takai](https://github.com/takai)
+* Hardware Supported: Choco60 PCB Rev.2
+* Hardware Availability: https://keys.recompile.net/projects/choco60/
+
+Make example for this keyboard (after setting up your build environment):
+
+    make choco60/rev2:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/choco60/rev2/rev2.c

@@ -0,0 +1,17 @@
+/* Copyright 2020 Naoto Takai
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "rev2.h"

keyboards/choco60/rev2/rev2.h

@@ -0,0 +1,19 @@
+/* Copyright 2020 Naoto Takai
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"

keyboards/choco60/rev2/rules.mk

@@ -0,0 +1,24 @@
+# MCU name
+MCU = atmega32u2
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+
+SPLIT_KEYBOARD = yes

keyboards/choco60/rules.mk

@@ -1,34 +1 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
-BOOTLOADER = caterina
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = no       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no        # Console for debug
-COMMAND_ENABLE = no        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-
-SPLIT_KEYBOARD = yes        # Enable split keyboard
+DEFAULT_FOLDER = choco60/rev1

keyboards/crbn/config.h

@@ -0,0 +1,54 @@
+/* Copyright 2020 Harry Herring
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x726F
+#define PRODUCT_ID      0x0002
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Polarity Works
+#define PRODUCT         CRBN
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B3, B1, F7, F6 }
+#define MATRIX_COL_PINS { D3, D2, D1, D0, D4, C6, D7, E6, B4, B5, B6, B2 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/*Rotary Encoder Pins*/
+#define ENCODERS_PAD_A { F5 }
+#define ENCODERS_PAD_B { F4 }
+
+/*Sets the number of pulses per increment*/
+#define ENCODER_RESOLUTION 2
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE

keyboards/crbn/crbn.c

@@ -0,0 +1,24 @@
+/* Copyright 2020 Harry Herring
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "crbn.h"
+/* Encoder setting. only one encoder despite 4 possible spots */
+__attribute__((weak)) void encoder_update_user(uint8_t index, bool clockwise) {
+    if (clockwise) {
+        tap_code(KC_VOLU);
+    } else {
+        tap_code(KC_VOLD);
+    }
+}

keyboards/crbn/crbn.h

@@ -0,0 +1,42 @@
+/* Copyright 2020 Harry Herring
+	*
+	* This program is free software: you can redistribute it and/or modify
+	* it under the terms of the GNU General Public License as published by
+	* the Free Software Foundation, either version 2 of the License, or
+	* (at your option) any later version.
+	*
+	* This program is distributed in the hope that it will be useful,
+	* but WITHOUT ANY WARRANTY; without even the implied warranty of
+	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	* GNU General Public License for more details.
+	*
+	* You should have received a copy of the GNU General Public License
+	* along with this program.  If not, see <http://www.gnu.org/licenses/>.
+	*/
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_crbn_1x2u( \
+		K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \
+		K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, \
+		K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, \
+		K300, K301, K302, K303, K304,    K305,    K307, K308, K309, K310, K311  \
+) { \
+		{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011 }, \
+		{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111 }, \
+		{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211 }, \
+		{ K300,  K301,  K302,  K303,  K304,  K305, KC_NO,  K307,  K308,  K309,  K310,  K311 }  \
+}
+
+#define LAYOUT_crbn_2x2u( \
+		K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \
+		K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, \
+		K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, \
+		K300, K301, K302, K303,    K304,       K307,    K308, K309, K310, K311  \
+) { \
+		{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011 }, \
+		{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111 }, \
+		{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211 }, \
+		{ K300,  K301,  K302,  K303,  K304, KC_NO, KC_NO,  K307,  K308,  K309,  K310,  K311 }  \
+}

keyboards/crbn/info.json

@@ -0,0 +1,109 @@
+{
+  "keyboard_name": "CRBN",
+  "keyboard_folder": "crbn",
+  "url": "polarityworks.com",
+  "maintainer": "qmk",
+  "width": 12,
+  "height": 4,
+  "layouts": {
+    "LAYOUT_crbn_1x2u": {
+      "layout": [
+        { "w": 1, "x": 0, "y": 0 },
+        { "w": 1, "x": 1, "y": 0 },
+        { "w": 1, "x": 2, "y": 0 },
+        { "w": 1, "x": 3, "y": 0 },
+        { "w": 1, "x": 4, "y": 0 },
+        { "w": 1, "x": 5, "y": 0 },
+        { "w": 1, "x": 6, "y": 0 },
+        { "w": 1, "x": 7, "y": 0 },
+        { "w": 1, "x": 8, "y": 0 },
+        { "w": 1, "x": 9, "y": 0 },
+        { "w": 1, "x": 10, "y": 0 },
+        { "w": 1, "x": 11, "y": 0 },
+        { "w": 1, "x": 0, "y": 1 },
+        { "w": 1, "x": 1, "y": 1 },
+        { "w": 1, "x": 2, "y": 1 },
+        { "w": 1, "x": 3, "y": 1 },
+        { "w": 1, "x": 4, "y": 1 },
+        { "w": 1, "x": 5, "y": 1 },
+        { "w": 1, "x": 6, "y": 1 },
+        { "w": 1, "x": 7, "y": 1 },
+        { "w": 1, "x": 8, "y": 1 },
+        { "w": 1, "x": 9, "y": 1 },
+        { "w": 1, "x": 10, "y": 1 },
+        { "w": 1, "x": 11, "y": 1 },
+        { "w": 1, "x": 0, "y": 2 },
+        { "w": 1, "x": 1, "y": 2 },
+        { "w": 1, "x": 2, "y": 2 },
+        { "w": 1, "x": 3, "y": 2 },
+        { "w": 1, "x": 4, "y": 2 },
+        { "w": 1, "x": 5, "y": 2 },
+        { "w": 1, "x": 6, "y": 2 },
+        { "w": 1, "x": 7, "y": 2 },
+        { "w": 1, "x": 8, "y": 2 },
+        { "w": 1, "x": 9, "y": 2 },
+        { "w": 1, "x": 10, "y": 2 },
+        { "w": 1, "x": 11, "y": 2 },
+        { "w": 1, "x": 0, "y": 3 },
+        { "w": 1, "x": 1, "y": 3 },
+        { "w": 1, "x": 2, "y": 3 },
+        { "w": 1, "x": 3, "y": 3 },
+        { "w": 1, "x": 4, "y": 3 },
+        { "w": 2, "x": 5, "y": 3 },
+        { "w": 1, "x": 7, "y": 3 },
+        { "w": 1, "x": 8, "y": 3 },
+        { "w": 1, "x": 9, "y": 3 },
+        { "w": 1, "x": 10, "y": 3 },
+        { "w": 1, "x": 11, "y": 3 } ]
+    },
+    "LAYOUT_crbn_2x2u": {
+      "layout": [
+        { "w": 1, "x": 0, "y": 0 },
+        { "w": 1, "x": 1, "y": 0 },
+        { "w": 1, "x": 2, "y": 0 },
+        { "w": 1, "x": 3, "y": 0 },
+        { "w": 1, "x": 4, "y": 0 },
+        { "w": 1, "x": 5, "y": 0 },
+        { "w": 1, "x": 6, "y": 0 },
+        { "w": 1, "x": 7, "y": 0 },
+        { "w": 1, "x": 8, "y": 0 },
+        { "w": 1, "x": 9, "y": 0 },
+        { "w": 1, "x": 10, "y": 0 },
+        { "w": 1, "x": 11, "y": 0 },
+        { "w": 1, "x": 0, "y": 1 },
+        { "w": 1, "x": 1, "y": 1 },
+        { "w": 1, "x": 2, "y": 1 },
+        { "w": 1, "x": 3, "y": 1 },
+        { "w": 1, "x": 4, "y": 1 },
+        { "w": 1, "x": 5, "y": 1 },
+        { "w": 1, "x": 6, "y": 1 },
+        { "w": 1, "x": 7, "y": 1 },
+        { "w": 1, "x": 8, "y": 1 },
+        { "w": 1, "x": 9, "y": 1 },
+        { "w": 1, "x": 10, "y": 1 },
+        { "w": 1, "x": 11, "y": 1 },
+        { "w": 1, "x": 0, "y": 2 },
+        { "w": 1, "x": 1, "y": 2 },
+        { "w": 1, "x": 2, "y": 2 },
+        { "w": 1, "x": 3, "y": 2 },
+        { "w": 1, "x": 4, "y": 2 },
+        { "w": 1, "x": 5, "y": 2 },
+        { "w": 1, "x": 6, "y": 2 },
+        { "w": 1, "x": 7, "y": 2 },
+        { "w": 1, "x": 8, "y": 2 },
+        { "w": 1, "x": 9, "y": 2 },
+        { "w": 1, "x": 10, "y": 2 },
+        { "w": 1, "x": 11, "y": 2 },
+        { "w": 1, "x": 0, "y": 3 },
+        { "w": 1, "x": 1, "y": 3 },
+        { "w": 1, "x": 2, "y": 3 },
+        { "w": 1, "x": 3, "y": 3 },
+        { "w": 2, "x": 4, "y": 3 },
+        { "w": 2, "x": 6, "y": 3 },
+        { "w": 1, "x": 8, "y": 3 },
+        { "w": 1, "x": 9, "y": 3 },
+        { "w": 1, "x": 10, "y": 3 },
+        { "w": 1, "x": 11, "y": 3 } ]
+    }
+  }
+}

keyboards/crbn/keymaps/default/keymap.c

@@ -0,0 +1,45 @@
+/* Copyright 2020 Harry Herring
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+		LAYOUT_crbn_1x2u(
+				KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
+				KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
+				KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT,
+				MO(3), KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT),
+
+		LAYOUT_crbn_1x2u(
+				KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_TRNS,
+				KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
+				KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, LSFT(KC_NUHS), LSFT(KC_NUBS), KC_HOME, KC_END, KC_TRNS,
+				KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY),
+
+		LAYOUT_crbn_1x2u(
+				KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS,
+				KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS,
+				KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, KC_TRNS,
+				KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY),
+
+		LAYOUT_crbn_1x2u(
+				RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+				KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+				KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+				KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+};

keyboards/crbn/readme.md

@@ -0,0 +1,19 @@
+# CRBN
+
+A compact 40% (12x4) ortholinear keyboard kit made by Polarity Works and sold by keygem
+
+* Keyboard Maintainer: [ReFil](https://github.com/ReFil)
+* Hardware Supported: CRBN kit with a pro micro
+* Hardware Availability: [Keygem](https://keygem.store/collections/group-buys/products/group-buy-featherlight-40-kit)
+
+Support for this keyboard is available in the Polarity Works [discord](https://discord.gg/NysAH3Gser)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make crbn:default
+
+Flashing example for this keyboard:
+
+    make crbn:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/crbn/rules.mk

@@ -0,0 +1,23 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = full     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+ENCODER_ENABLE = yes

keyboards/dmqdesign/spin/keymaps/spidey3_pad/config.h

@@ -0,0 +1,42 @@
+/* Copyright 2019-2020 DMQ Design
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define RGBLIGHT_HUE_STEP 8
+
+// place overrides here
+
+#define NO_ACTION_ONESHOT
+#undef LOCKING_SUPPORT_ENABLE
+
+#define LAYER_STATE_8BIT
+#define MAX_LAYER 4
+
+#undef RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_EFFECT_BREATHING
+#define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#define RGBLIGHT_EFFECT_SNAKE
+#define RGBLIGHT_EFFECT_KNIGHT
+#define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#define RGBLIGHT_EFFECT_ALTERNATING
+#define RGBLIGHT_EFFECT_TWINKLE
+
+#define RGBLIGHT_SLEEP
+#define RGBLIGHT_LAYERS
+#define RGBLIGHT_LAYER_BLINK
+#define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF

keyboards/dmqdesign/spin/keymaps/spidey3_pad/keymap.c

@@ -0,0 +1,237 @@
+/* Copyright 2020 Joshua Moses Diamond
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#include "version.h"
+#include <stdlib.h>
+
+#define RGB_LAYER_ACK_DURATION 500
+
+enum layers { _MACRO, _NUMPAD, _RGB, _FN };
+
+enum layer_base {
+    LAYER_BASE     = _MACRO,
+    LAYER_BASE_END = _FN + 1,
+};
+
+enum custom_keycodes {
+    HELLO = SAFE_RANGE,
+    CH_CPNL,  // AL Control Panel
+    CH_ASST,  // AL Context-aware Desktop Assistant
+    CH_SUSP,  // Suspend
+};
+
+// clang-format off
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_MACRO] = LAYOUT(
+        A(S(KC_N)),    HELLO,         CH_SUSP,       TO(_MACRO), 
+        KC_MPRV,       KC_MPLY,       KC_MNXT,       TO(_NUMPAD), 
+        C(A(KC_COMM)), KC_F5,         C(A(KC_DOT)),  TO(_RGB),
+        MO(_FN),       CH_ASST,       CH_CPNL),
+
+    [_NUMPAD] = LAYOUT(
+        KC_KP_7,   KC_KP_8,   KC_KP_9,   KC_TRNS,
+        KC_KP_4,   KC_KP_5,   KC_KP_6,   KC_TRNS,
+        KC_KP_1,   KC_KP_2,   KC_KP_3,   KC_TRNS,
+        KC_KP_0,   KC_PDOT,   KC_PENT),
+
+    [_RGB] = LAYOUT(
+        RGB_HUI,   RGB_SAI,   RGB_VAI,   KC_TRNS,
+        RGB_HUD,   RGB_SAD,   RGB_VAD,   KC_TRNS,
+        RGB_SPD,   RGB_SPI,   KC_NO,     KC_TRNS,
+        RGB_RMOD,  RGB_TOG,   RGB_MOD),
+
+    [_FN] = LAYOUT(
+        KC_TRNS,   DEBUG,     RESET,     KC_TRNS,
+        KC_NO,     KC_NO,     EEP_RST,   KC_TRNS,
+        KC_NO,     KC_NO,     KC_NO,     KC_TRNS,
+        KC_NO,     KC_NO,     KC_NO),
+};
+// clang-format on 
+
+typedef enum layer_ack {
+    ACK_NO = 0,
+    ACK_YES,
+    ACK_MEH,
+} layer_ack_t;
+
+#define LAYER_OFFSET 0
+const rgblight_segment_t PROGMEM _macro_layer[]  = RGBLIGHT_LAYER_SEGMENTS({0, 1, HSV_TEAL});
+const rgblight_segment_t PROGMEM _numpad_layer[] = RGBLIGHT_LAYER_SEGMENTS({1, 1, HSV_TEAL});
+const rgblight_segment_t PROGMEM _rgb_layer[]    = RGBLIGHT_LAYER_SEGMENTS({2, 1, HSV_TEAL});
+const rgblight_segment_t PROGMEM _fn_layer[]     = RGBLIGHT_LAYER_SEGMENTS({0, 3, HSV_PURPLE});
+
+#define ACK_OFFSET 4
+const rgblight_segment_t PROGMEM _no_layer[]  = RGBLIGHT_LAYER_SEGMENTS({0, 3, HSV_RED});
+const rgblight_segment_t PROGMEM _yes_layer[] = RGBLIGHT_LAYER_SEGMENTS({0, 3, HSV_GREEN});
+const rgblight_segment_t PROGMEM _meh_layer[] = RGBLIGHT_LAYER_SEGMENTS({0, 3, HSV_YELLOW});
+
+// clang-format on 
+const rgblight_segment_t *const PROGMEM _rgb_layers[] = {
+    [LAYER_OFFSET + 0] = _macro_layer,
+    [LAYER_OFFSET + 1] = _numpad_layer,
+    [LAYER_OFFSET + 2] = _rgb_layer,
+    [LAYER_OFFSET + 3] = _fn_layer,
+   
+    [ACK_OFFSET + ACK_NO] = _no_layer,
+    [ACK_OFFSET + ACK_YES] = _yes_layer,
+    [ACK_OFFSET + ACK_MEH] = _meh_layer,
+
+    [ACK_OFFSET + ACK_MEH + 1] = NULL
+};
+// clang-format off 
+
+const uint8_t PROGMEM _n_rgb_layers = sizeof(_rgb_layers) / sizeof(_rgb_layers[0]) - 1;
+
+void clear_rgb_layers(void) {
+    dprint("clear_rgb_layers()\n");
+    for (uint8_t i = 0; i < _n_rgb_layers; i++) {
+        rgblight_set_layer_state(i, false);
+    }
+}
+
+void do_rgb_layers(layer_state_t state, uint8_t start, uint8_t end) {
+    dprintf("start=%u, end=%u, LAYER_OFFSET=%u\n", start, end, LAYER_OFFSET);
+    for (uint8_t i = start; i < end; i++) {
+        bool    is_on = layer_state_cmp(state, i);
+        uint8_t rl    = LAYER_OFFSET + i;
+        dprintf("layer[%u]=%u, rl=%u\n", i, is_on, rl);
+        rgblight_set_layer_state(rl, is_on);
+    }
+}
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+    do_rgb_layers(state, LAYER_BASE, LAYER_BASE_END);
+    return state;
+}
+
+void rgb_layer_ack(layer_ack_t n) {
+    uint8_t layer = ACK_OFFSET + n;
+    dprintf("rgb_layer_ack(%u) ==> %u\n", n, layer);
+    rgblight_blink_layer(layer, RGB_LAYER_ACK_DURATION);
+}
+
+void rgb_layer_ack_yn(bool yn) { rgb_layer_ack(yn ? ACK_YES : ACK_NO); }
+
+void keyboard_post_init_user(void) {
+    // Enable the LED layers
+    rgblight_layers = _rgb_layers;
+    do_rgb_layers(layer_state, LAYER_BASE, LAYER_BASE_END);
+}
+
+void shutdown_user() {
+    clear_rgb_layers();
+    rgblight_enable();
+    rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT);
+    rgblight_sethsv_noeeprom(HSV_RED);
+}
+
+void spidey_glow(void) {
+    rgblight_enable();
+    rgblight_mode(RGBLIGHT_MODE_RAINBOW_MOOD);
+    rgblight_sethsv(255, 230, 128);
+}
+
+void eeconfig_init_user(void) { spidey_glow(); }
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    if (record->event.pressed) {
+        switch (keycode) {
+            // Re-implement this here, but fix the persistence!
+            case DEBUG:
+                if (!debug_enable) {
+                    debug_enable = 1;
+                } else if (!debug_keyboard) {
+                    debug_keyboard = 1;
+                } else if (!debug_matrix) {
+                    debug_matrix = 1;
+                } else {
+                    debug_enable   = 0;
+                    debug_keyboard = 0;
+                    debug_matrix   = 0;
+                }
+                uprintf("DEBUG: enable=%u, keyboard=%u, matrix=%u\n", debug_enable, debug_keyboard, debug_matrix);
+                uprintln(QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION ", Built on: " QMK_BUILDDATE);
+                eeconfig_update_debug(debug_config.raw);
+                return false;
+
+                // clang-format off
+            case CH_CPNL: host_consumer_send(AL_CONTROL_PANEL); return false;
+            case CH_ASST: host_consumer_send(AL_ASSISTANT); return false;
+            case CH_SUSP: tap_code16(LGUI(LSFT(KC_L))); return true;
+            case HELLO:   SEND_STRING("Hello, world!"); return true;
+                // clang-format on
+        }
+    } else {
+        switch (keycode) {
+            case CH_CPNL:
+            case CH_ASST:
+                host_consumer_send(0);
+                return false;
+        }
+    }
+
+    return true;
+};
+
+
+void post_process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        // Acks follow...
+        case DEBUG:
+            rgb_layer_ack_yn(debug_enable);
+            break;
+        case RGB_TOG:
+            rgb_layer_ack_yn(rgblight_is_enabled());
+            break;
+    }
+}
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+    switch (get_highest_layer(layer_state)) {
+        case _RGB:
+            if (index == 0) {
+                if (clockwise) {
+                    rgblight_increase_hue();
+                } else {
+                    rgblight_decrease_hue();
+                }
+            } else if (index == 1) {
+                if (clockwise) {
+                    rgblight_increase_sat();
+                } else {
+                    rgblight_decrease_sat();
+                }
+            } else if (index == 2) {
+                if (clockwise) {
+                    rgblight_increase_val();
+                } else {
+                    rgblight_decrease_val();
+                }
+            }
+            break;
+
+        default:
+            if (index == 0) {
+                tap_code16(C(S(clockwise ? KC_EQL : KC_MINS)));
+            } else if (index == 1) {
+                tap_code16(C(clockwise ? KC_EQL : KC_MINS));
+            } else if (index == 2) {
+                tap_code(clockwise ? KC_VOLU : KC_VOLD);
+            }
+            break;
+    }
+}

keyboards/dmqdesign/spin/keymaps/spidey3_pad/readme.md

@@ -0,0 +1 @@
+spidey3 keymap for spin keypad

keyboards/dmqdesign/spin/keymaps/spidey3_pad/rules.mk

@@ -0,0 +1,7 @@
+MOUSEKEY_ENABLE    = no
+MIDI_ENABLE        = no
+BOOTMAGIC_ENABLE   = lite
+LTO_ENABLE         = yes
+CONSOLE_ENABLE     = yes    # Console for debug
+GRAVE_ESC_ENABLE   = no
+

keyboards/handwired/6key/6key.c

@@ -0,0 +1,16 @@
+ /* Copyright 2020 Bratzworth 
+  * 
+  * This program is free software: you can redistribute it and/or modify 
+  * it under the terms of the GNU General Public License as published by 
+  * the Free Software Foundation, either version 2 of the License, or 
+  * (at your option) any later version. 
+  * 
+  * This program is distributed in the hope that it will be useful, 
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of 
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
+  * GNU General Public License for more details. 
+  * 
+  * You should have received a copy of the GNU General Public License 
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
+  */ 
+#include "6key.h"

keyboards/handwired/6key/6key.h

@@ -0,0 +1,27 @@
+ /* Copyright 2020 Bratzworth 
+  * 
+  * This program is free software: you can redistribute it and/or modify 
+  * it under the terms of the GNU General Public License as published by 
+  * the Free Software Foundation, either version 2 of the License, or 
+  * (at your option) any later version. 
+  * 
+  * This program is distributed in the hope that it will be useful, 
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of 
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
+  * GNU General Public License for more details. 
+  * 
+  * You should have received a copy of the GNU General Public License 
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
+  */
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+      k00, k01, k02,    \
+      k03, k04, k05     \
+) \
+{ \
+    { k00, k01, k02 },  \
+    { k03, k04, k05 }   \
+} 

keyboards/handwired/6key/config.h

@@ -0,0 +1,41 @@
+ /* Copyright 2020 Bratzworth 
+  * 
+  * This program is free software: you can redistribute it and/or modify 
+  * it under the terms of the GNU General Public License as published by 
+  * the Free Software Foundation, either version 2 of the License, or 
+  * (at your option) any later version. 
+  * 
+  * This program is distributed in the hope that it will be useful, 
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of 
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
+  * GNU General Public License for more details. 
+  * 
+  * You should have received a copy of the GNU General Public License 
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
+  */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xBEEF
+#define PRODUCT_ID      0x0007
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Bratzworth
+#define PRODUCT         6key
+
+/* key matrix size */
+#define MATRIX_ROWS 2
+#define MATRIX_COLS 3
+
+/* pin-out */
+#define MATRIX_ROW_PINS { B4, D0 }
+#define MATRIX_COL_PINS { D3, D2, D1 }
+#define UNUSED_PINS
+
+/* dip switch */
+#define DIP_SWITCH_PINS { C6 }
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW