Add missing virtser_init() to ChibiOS code (#15356)

Co-authored-by: fenuks <fenuks>

keyboards/0xcb/1337/config.h

@@ -37,10 +37,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     { E6, B4, B2 } \
 }
 #define TAP_CODE_DELAY 10
-#define ENCODER_DIRECTION_FLIP
 #define ENCODER_RESOLUTION 4
-#define ENCODERS_PAD_A { F5 }
-#define ENCODERS_PAD_B { F6 }
+#define ENCODERS_PAD_A { F6 }
+#define ENCODERS_PAD_B { F5 }
 
 #define BACKLIGHT_PIN B5
 #define BACKLIGHT_BREATHING

keyboards/absinthe/config.h

@@ -44,10 +44,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, D3, D0 }
 #define UNUSED_PINS
 
-#define ENCODERS_PAD_A { D5 }
-#define ENCODERS_PAD_B { B7 }
-
-#define ENCODER_DIRECTION_FLIP
+#define ENCODERS_PAD_A { B7 }
+#define ENCODERS_PAD_B { D5 }
 
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW

keyboards/aplyard/aplx6/rev2/config.h

@@ -41,9 +41,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define TAPPING_TERM 200
 
 /* Encoder */
-#define ENCODERS_PAD_A { F4 }
-#define ENCODERS_PAD_B { F5 }
+#define ENCODERS_PAD_A { F5 }
+#define ENCODERS_PAD_B { F4 }
 #define ENCODER_RESOLUTION 4
-#define ENCODER_DIRECTION_FLIP
 
 #define TAP_CODE_DELAY 50

keyboards/basketweave/config.h

@@ -50,10 +50,9 @@
  */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 
-#define ENCODERS_PAD_A { D7 }
-#define ENCODERS_PAD_B { C0 }
+#define ENCODERS_PAD_A { C0 }
+#define ENCODERS_PAD_B { D7 }
 #define ENCODER_RESOLUTION 4
-#define ENCODER_DIRECTION_FLIP
 #define TAP_CODE_DELAY 10
 
 /* Bootmagic Lite key configuration */

keyboards/bpiphany/ghost_squid/config.h

@@ -0,0 +1,42 @@
+/*
+Copyright 2016 Daniel Svensson <dsvensson@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6050
+#define DEVICE_VER      0x0104
+#define MANUFACTURER    Bathroom Epiphanies
+#define PRODUCT         ghost_squid
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 18
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+#define LED_PIN_ON_STATE 0
+#define LED_NUM_LOCK_PIN C5
+#define LED_CAPS_LOCK_PIN C6
+#define LED_SCROLL_LOCK_PIN B7
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5

keyboards/bpiphany/ghost_squid/ghost_squid.c

@@ -0,0 +1,26 @@
+/*
+Copyright 2016 Daniel Svensson <dsvensson@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "ghost_squid.h"
+
+void keyboard_pre_init_kb(void) {
+    setPinOutput(D0);
+    writePinLow(D0);
+    fn_led_off();
+    
+    keyboard_pre_init_user();
+}

keyboards/bpiphany/ghost_squid/ghost_squid.h

@@ -0,0 +1,44 @@
+/*
+Copyright 2016 Daniel Svensson <dsvensson@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "quantum.h"
+
+#define fn_led_on() writePinLow(D0)
+#define fn_led_off() writePinHigh(D0)
+
+#define  ___ KC_NO
+
+#define LAYOUT( \
+	KJ6,      KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0,   KC7, KC5, KA5,                       \
+	KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2,   KL4, KO4, KQ4,   KK1, KL1, KQ1, KQ0, \
+	KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3,   KK4, KO7, KQ7,   KK5, KL5, KQ5, KO5, \
+	KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6,      KB1,                    KK2, KL2, KQ2,      \
+	KN2, KI6, KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0,      KN3,        KO6,        KK3, KL3, KQ3, KO3, \
+	KA4, KP2, KC6,                KK6,                KC0, KM3, KD0, KA1,   KO0, KK0, KL0,   KL6,      KQ6       \
+	) { /*        00-A  01-B  02-C  03-D  04-E  05-F  06-G  07-H  08-I  09-J  10-K  11-L  12-M  13-N  14-O  15-P  16-Q  17-R */ \
+		/* 0 */  { ___ , KB0 , KC0 , KD0 , ___ , KF0 , KG0 , ___ , ___ , ___ , KK0 , KL0 , ___ , ___ , KO0 , ___ , KQ0 , KR0 }, \
+		/* 1 */  { KA1 , KB1 , ___ , KD1 , KE1 , KF1 , KG1 , KH1 , KI1 , KJ1 , KK1 , KL1 , ___ , ___ , ___ , ___ , KQ1 , ___ }, \
+		/* 2 */  { ___ , KB2 , ___ , KD2 , KE2 , KF2 , KG2 , KH2 , KI2 , KJ2 , KK2 , KL2 , ___ , KN2 , ___ , KP2 , KQ2 , KR2 }, \
+		/* 3 */  { ___ , KB3 , ___ , KD3 , KE3 , KF3 , KG3 , KH3 , KI3 , KJ3 , KK3 , KL3 , KM3 , KN3 , KO3 , ___ , KQ3 , KR3 }, \
+		/* 4 */  { KA4 , KB4 , ___ , KD4 , KE4 , KF4 , KG4 , KH4 , KI4 , KJ4 , KK4 , KL4 , ___ , ___ , KO4 , ___ , KQ4 , KR4 }, \
+		/* 5 */  { KA5 , ___ , KC5 , KD5 , KE5 , KF5 , KG5 , KH5 , KI5 , KJ5 , KK5 , KL5 , ___ , ___ , KO5 , ___ , KQ5 , KR5 }, \
+		/* 6 */  { ___ , KB6 , KC6 , ___ , KE6 , KF6 , KG6 , KH6 , KI6 , KJ6 , KK6 , KL6 , ___ , ___ , KO6 , ___ , KQ6 , KR6 }, \
+		/* 7 */  { KA7 , KB7 , KC7 , KD7 , KE7 , KF7 , KG7 , KH7 , KI7 , KJ7 , ___ , ___ , ___ , ___ , KO7 , ___ , KQ7 , KR7 }  \
+	}
+

keyboards/bpiphany/ghost_squid/keymaps/default/keymap.c

@@ -0,0 +1,77 @@
+/*
+Copyright 2016 Daniel Svensson <dsvensson@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+/* Default qwerty layout
+* ┌───┐   ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┐     ┌───────────┐
+* │ESC│   │F1 │F2 │F3 │F4 │ │F5 │F6 │F7 │F8 │ │F9 │F10│F11│F12│ │PRT│SCR│PAU│     │Ghost Squid│
+* └───┘   └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┘     └───────────┘
+* ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ ┌───┬───┬───┐ ┌───┬───┬───┬───┐
+* │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ Backsp│ │INS│HOM│PgU│ │NUM│ / │ * │ - │
+* ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ ├───┼───┼───┤ ├───┼───┼───┼───┤
+* │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │     │ │DEL│END│PgD│ │ 7 │ 8 │ 9 │   │
+* ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐  ↲ │ └───┴───┴───┘ ├───┼───┼───┤ + │
+* │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ \ │    │               │ 7 │ 8 │ 9 │   │
+* ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤     ┌───┐     ├───┼───┼───┼───┤
+* │Shif│ # │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │    Shift │     │ ↑ │     │ 1 │ 2 │ 3 │   │
+* ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ ┌───┼───┼───┐ ├───┴───┼───┤ ↲ │
+* │Ctrl│GUI │Alt │                        │ Alt│ GUI│Fn  │Ctrl│ │ ← │ ↓ │ → │ │   0   │ , │   │ 
+* └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ └───┴───┴───┘ └───────┴───┴───┘
+*/
+
+enum layer_names {
+    KM_QWERTY,
+    KM_MEDIA,
+    KM_GUI_LOCK
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	/* Layer 0: Standard ISO layer */
+	[KM_QWERTY] = LAYOUT(
+KC_ESC,          KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12,   KC_PSCR,KC_SLCK,KC_PAUS,
+KC_GRV,  KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL, KC_BSPC,  KC_INS, KC_HOME,KC_PGUP,    KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS,
+KC_TAB,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,KC_BSLS,  KC_DEL, KC_END, KC_PGDN,    KC_P7,  KC_P8,  KC_P9,  KC_PPLS,
+KC_CLCK, KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,        KC_ENT,                               KC_P4,  KC_P5,  KC_P6,
+KC_LSFT, KC_NUBS,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,        KC_RSFT,          KC_UP,              KC_P1,  KC_P2,  KC_P3,  KC_PENT,
+KC_LCTL, KC_LGUI,KC_LALT,                       KC_SPC,                          KC_RALT,KC_RGUI,MO(KM_MEDIA),KC_RCTL,   KC_LEFT,KC_DOWN,KC_RGHT,    KC_P0,          KC_PDOT),
+	/* Layer 1: Function layer */
+	[KM_MEDIA] = LAYOUT(
+_______,_______,_______,_______,_______,  KC_MEDIA_PLAY_PAUSE, KC_MEDIA_STOP, KC_MEDIA_PREV_TRACK, KC_MEDIA_NEXT_TRACK,  TG(KM_GUI_LOCK),KC_MUTE, KC_VOLD, KC_VOLU,_______,_______, RESET,
+_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,
+_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,
+_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,
+_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,  _______,_______,
+_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______),
+	[KM_GUI_LOCK] = LAYOUT(
+_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,
+_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,
+_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,
+_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,
+_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,
+_______,KC_NO,_______,_______,_______,KC_NO,_______,_______,_______,_______,_______,_______,_______)
+};
+
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+    if (IS_LAYER_ON_STATE(state, KM_GUI_LOCK)) {
+        fn_led_on();
+    } else {
+        fn_led_off();
+    }
+    return state;
+}

keyboards/bpiphany/ghost_squid/keymaps/default/readme.md

@@ -0,0 +1 @@
+# Default layout desc TODO

keyboards/bpiphany/ghost_squid/matrix.c

@@ -0,0 +1,97 @@
+/*
+  Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
+  Copyright 2016 Daniel Svensson <dsvensson@gmail.com>
+
+  This program is free software: you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation, either version 2 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "matrix.h"
+#include "quantum.h"
+
+matrix_row_t read_rows(void) {
+    return
+        (PINB & (1 << 1) ? 0 : ((matrix_row_t)1 << 0)) |
+        (PINC & (1 << 2) ? 0 : ((matrix_row_t)1 << 1)) |
+        (PINB & (1 << 6) ? 0 : ((matrix_row_t)1 << 2)) |
+        (PINB & (1 << 4) ? 0 : ((matrix_row_t)1 << 3)) |
+        (PINB & (1 << 3) ? 0 : ((matrix_row_t)1 << 4)) |
+        (PINB & (1 << 2) ? 0 : ((matrix_row_t)1 << 5)) |
+        (PINB & (1 << 0) ? 0 : ((matrix_row_t)1 << 6)) |
+        (PINB & (1 << 5) ? 0 : ((matrix_row_t)1 << 7));
+}
+
+void select_col(uint8_t col) {
+    switch (col) {
+        case  0: PORTD = (PORTD & ~0b01111110) | 0b01100010; break;
+        case  1: PORTD = (PORTD & ~0b01111110) | 0b01101000; break;
+        case  2: PORTD = (PORTD & ~0b01111110) | 0b01101100; break;
+        case  3: PORTD = (PORTD & ~0b01111110) | 0b01110000; break;
+        case  4: PORTD = (PORTD & ~0b01111110) | 0b01111000; break;
+        case  5: PORTD = (PORTD & ~0b01111110) | 0b01100000; break;
+        case  6: PORTD = (PORTD & ~0b01111110) | 0b01110100; break;
+        case  7: PORTD = (PORTD & ~0b01111110) | 0b01100100; break;
+        case  8: PORTD = (PORTD & ~0b01111110) | 0b01111100; break;
+        case  9: PORTD = (PORTD & ~0b01111110) | 0b01101010; break;
+        case 10: PORTD = (PORTD & ~0b01111110) | 0b00110110; break;
+        case 11: PORTD = (PORTD & ~0b01111110) | 0b00010110; break;
+        case 12: PORTD = (PORTD & ~0b01111110) | 0b01001110; break;
+        case 13: PORTD = (PORTD & ~0b01111110) | 0b00111110; break;
+        case 14: PORTD = (PORTD & ~0b01111110) | 0b00011110; break;
+        case 15: PORTD = (PORTD & ~0b01111110) | 0b01000110; break;
+        case 16: PORTD = (PORTD & ~0b01111110) | 0b00100110; break;
+        case 17: PORTD = (PORTD & ~0b01111110) | 0b00101110; break;
+    }
+}
+
+void matrix_init_custom(void) {
+    /* Column output pins */
+    setPinOutput(D1);
+    setPinOutput(D2);
+    setPinOutput(D3);
+    setPinOutput(D4);
+    setPinOutput(D5);
+    setPinOutput(D6);
+
+    /* Row input pins */
+    writePinHigh(B0);
+    writePinHigh(B1);
+    writePinHigh(B2);
+    writePinHigh(B3);
+    writePinHigh(B4);
+    writePinHigh(B5);
+    writePinHigh(B6);
+    writePinHigh(C2);
+}
+
+bool matrix_scan_custom(matrix_row_t current_matrix[]) {
+    bool changed = false;
+
+    for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+        select_col(col);
+        matrix_io_delay();
+        matrix_row_t rows = read_rows();
+
+        for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+            bool prev_bit = current_matrix[row] & ((matrix_row_t)1 << col);
+            bool curr_bit = rows & (1 << row);
+
+            if (prev_bit != curr_bit) {
+                current_matrix[row] ^= (matrix_row_t)1 << col;
+                changed = true;
+            }
+        }
+    }
+
+    return changed;
+}

keyboards/bpiphany/ghost_squid/readme.md

@@ -0,0 +1,27 @@
+# Ghost Squid Controller
+
+This is the firmware for Rev. 20140518 of the Ghost Squid controller by [Bathroom Epiphanies](http://bathroomepiphanies.com/controllers/), a replacement controller for the [Cooler Master Quick Fire XT](https://www.coolermaster.com/catalog/peripheral/keyboards/quick-fire-xt/).
+
+The code was adapted from the [BathroomEpiphanies QMK Firmware](https://github.com/BathroomEpiphanies/epiphanies_qmk_keyboard/tree/master/keyboards/ghost_squid_20140518).
+
+* Keyboard Maintainer: QMK Community
+* Hardware Supported: Ghost Squid
+* Hardware Availability: [1upkeyboards](https://1upkeyboards.com/shop/controllers/qf-xt-ghost-squid-controller-2/)
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+
+Make example for this keyboard (after setting up your build environment):
+
+104 key default layout:
+
+    make bpiphany/ghost_squid:default
+
+Flashing example for this keyboard:
+
+    make bpiphany/ghost_squid:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/bpiphany/ghost_squid/rules.mk

@@ -0,0 +1,23 @@
+# MCU name
+MCU = atmega32u2
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+CUSTOM_MATRIX = lite
+SRC += matrix.c

keyboards/keebio/iris/keymaps/mnil/keymap.c

@@ -62,7 +62,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                   //├────────┼────────┼────────┼────────┼────────┼────────┤                           ├────────┼────────┼────────┼────────┼────────┼────────┤
                      KC_TRNS, SE_LCBR, SE_RCBR, SE_LPRN, SE_RPRN, KC_NO,                               SE_PLUS, S(KC_1), S(KC_2), S(KC_3), SE_AMPR, KC_TRNS,
                   //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐         ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
-                     KC_TRNS, M_TILD,  M_CIRC,  SE_LESS, SE_GRTR, KC_NO,   KC_TRNS,           KC_TRNS, SE_APOS, SE_SLSH, SE_BSLS, SE_ASTR, M_BTCK,  KC_TRNS,
+                     KC_TRNS, M_TILD,  M_CIRC,  SE_LABK, SE_RABK, KC_NO,   KC_TRNS,           KC_TRNS, SE_QUOT, SE_SLSH, SE_BSLS, SE_ASTR, M_BTCK,  KC_TRNS,
                   //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘         └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘
                                                     KC_TRNS, KC_TRNS, KC_TRNS,                    KC_TRNS, KC_TRNS, KC_TRNS ),
                   //                               └────────┴────────┴────────┘                  └────────┴────────┴────────┘

keyboards/keysofkings/twokey/config.h

@@ -35,10 +35,9 @@
 #define UNUSED_PINS
 
 
-#define ENCODERS_PAD_A { E6 }
-#define ENCODERS_PAD_B { D7 }
+#define ENCODERS_PAD_A { D7 }
+#define ENCODERS_PAD_B { E6 }
 #define ENCODER_RESOLUTION 1
-#define ENCODER_DIRECTION_FLIP
 
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW

keyboards/ll3macorn/bongopad/bongopad.c

@@ -0,0 +1,124 @@
+// Copyright 2021 Ll3macorn (@ll3macorn)
+// SPDX-License-Identifier: GPL-2.0-or-later
+#include "bongopad.h"
+
+
+#ifdef ENCODER_ENABLE
+bool encoder_update_kb(uint8_t index, bool clockwise) {
+    if (!encoder_update_user(index, clockwise)) {
+        return false;
+    }
+    // rest fo the code
+    if (clockwise) {
+        tap_code_delay(KC_VOLU, 10);
+    } else {
+        tap_code_delay(KC_VOLD, 10);
+    }
+    return true;
+}
+#endif
+
+#ifdef OLED_ENABLE
+bool oled_task_kb(void) {
+    if (!oled_task_user()) {
+        return false;
+    }
+
+// WPM-responsive animation stuff here
+#    define IDLE_FRAMES         5
+#    define IDLE_SPEED          0  // below this wpm value your animation will idle
+
+    // #define PREP_FRAMES 1 // uncomment if >1
+
+#    define TAP_FRAMES          2
+#    define TAP_SPEED           0  // above this wpm value typing animation to triggere
+
+#    define ANIM_FRAME_DURATION 200  // how long each frame lasts in ms
+// #define SLEEP_TIMER 60000 // should sleep after this period of 0 wpm, needs fixing
+#    define ANIM_SIZE           512  // number of bytes in array, minimize for adequate firmware size, max is 1024
+
+    uint32_t anim_timer         = 0;
+    uint32_t anim_sleep         = 0;
+    uint8_t  current_idle_frame = 0;
+    // uint8_t current_prep_frame = 0; // uncomment if PREP_FRAMES >1
+    uint8_t current_tap_frame = 0;
+
+    // Images credit j-inc(/James Incandenza) and pixelbenny. Credit to obosob for initial animation approach.
+   void render_anim(void) {
+        static const char PROGMEM idle[IDLE_FRAMES][ANIM_SIZE] = {{
+                                                                      0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,   0,  0, 0, 0, 0, 0, 0, 0, 0, 128, 64, 64, 32, 32, 32, 32, 16, 16,  16, 16, 16, 8,  8,  4,  4, 4, 8, 48, 64, 128, 0, 0, 0, 0,  0,  0,  0,  0,  0,  0,  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,   0,   0,   0,   0,   0,   0,   0, 0,   0,   0,   0,   0,   0,   0,   0, 128, 128, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,   0,   0,   0,   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 24, 100, 130, 2, 2, 2, 2, 2, 1, 0, 0, 0, 0, 128, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 128, 0, 48, 48, 0, 192, 193, 193, 194, 4, 8, 16, 32, 64, 128, 0, 0, 0, 128, 128, 128, 128, 64, 64, 64, 64, 32, 32, 32, 32, 16, 16, 16, 16, 8, 8, 8, 8, 8, 196, 4, 196, 4, 196, 2, 194, 2, 194, 1, 1, 1, 1, 0, 0, 0,
+                                                                      0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 192, 56, 4, 3, 0, 0, 0, 0, 0, 0, 0,   12, 12, 12, 13, 1,  0,  64, 160, 33, 34, 18, 17, 17, 17, 9, 8, 8, 8,  8,  4,   4, 8, 8, 16, 16, 16, 16, 16, 17, 15, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 170, 170, 255, 255, 195, 191, 127, 3, 127, 191, 195, 255, 255, 170, 170, 0, 0,   0,   0,   0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 128, 128, 128, 128, 64, 64, 64, 64, 32, 32, 32, 32, 16, 16, 16, 16, 8, 8, 8, 8, 8, 4, 4, 4, 4, 4, 2, 3, 2,  2,   1,   1, 1, 1, 1, 1, 2, 2, 4, 4, 8, 8,   8,   8, 8, 7, 0, 0, 0, 0, 0, 0, 0,   0, 0,  0,  0, 0,   0,   0,   0,   0, 0, 0,  0,  0,  0,   0, 0, 0, 0,   0,   0,   0,   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 0, 2, 2, 7, 31,  7, 31,  7, 28,  7, 31,  7, 31,  7, 2, 2, 0, 0, 0, 0,
+                                                                  },
+                                                                  {
+                                                                      0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,   0,  0, 0, 0, 0, 0, 0, 0, 0, 128, 64, 64, 32, 32, 32, 32, 16, 16,  16, 16, 16, 8,  8,  4,  4, 4, 8, 48, 64, 128, 0, 0, 0, 0,  0,  0,  0,  0,  0,  0,  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,   0,   0,   0,   0,   0,   0,   0, 0,   0,   0,   0,   0,   0,   0,   0, 128, 128, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,   0,   0,   0,   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 24, 100, 130, 2, 2, 2, 2, 2, 1, 0, 0, 0, 0, 128, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 128, 0, 48, 48, 0, 192, 193, 193, 194, 4, 8, 16, 32, 64, 128, 0, 0, 0, 128, 128, 128, 128, 64, 64, 64, 64, 32, 32, 32, 32, 16, 16, 16, 16, 8, 8, 8, 8, 8, 196, 4, 196, 4, 196, 2, 194, 2, 194, 1, 1, 1, 1, 0, 0, 0,
+                                                                      0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 192, 56, 4, 3, 0, 0, 0, 0, 0, 0, 0,   12, 12, 12, 13, 1,  0,  64, 160, 33, 34, 18, 17, 17, 17, 9, 8, 8, 8,  8,  4,   4, 8, 8, 16, 16, 16, 16, 16, 17, 15, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 170, 170, 255, 255, 195, 191, 127, 3, 127, 191, 195, 255, 255, 170, 170, 0, 0,   0,   0,   0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 128, 128, 128, 128, 64, 64, 64, 64, 32, 32, 32, 32, 16, 16, 16, 16, 8, 8, 8, 8, 8, 4, 4, 4, 4, 4, 2, 3, 2,  2,   1,   1, 1, 1, 1, 1, 2, 2, 4, 4, 8, 8,   8,   8, 8, 7, 0, 0, 0, 0, 0, 0, 0,   0, 0,  0,  0, 0,   0,   0,   0,   0, 0, 0,  0,  0,  0,   0, 0, 0, 0,   0,   0,   0,   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 0, 2, 2, 7, 31,  7, 31,  7, 28,  7, 31,  7, 31,  7, 2, 2, 0, 0, 0, 0,
+                                                                  },
+                                                                  {
+                                                                      0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,   0,   0,  0, 0, 0, 0, 0, 0, 0, 0, 128, 128, 64, 64, 64, 64, 32, 32,  32, 32, 16, 8,  4,  2,  2,  4, 24, 96, 128, 0, 0, 0, 0, 0,  0,  0,  0,  0,  0,  0,  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,   0,   0,   0,   0,   0,   0,   0, 0,   0,   0,   0,   0,   0,   0,   0, 128, 128, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,   0,   0,   0,   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 60, 194, 1, 1, 2, 2, 4, 4, 2, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 96, 96, 0, 129, 130, 130, 132, 8, 16, 32, 64, 128, 0, 0, 0, 0, 128, 128, 128, 128, 64, 64, 64, 64, 32, 32, 32, 32, 16, 16, 16, 16, 8, 8, 8, 8, 8, 196, 4, 196, 4, 196, 2, 194, 2, 194, 1, 1, 1, 1, 0, 0, 0,
+                                                                      0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 128, 112, 25, 6, 0, 0, 0, 0, 0, 0, 0, 24,  24,  24, 27, 3,  0,  64, 160, 34, 36, 20, 18, 18, 18, 11, 8, 8,  8,  8,   5, 5, 9, 9, 16, 16, 16, 16, 16, 17, 15, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 170, 170, 255, 255, 195, 191, 127, 3, 127, 191, 195, 255, 255, 170, 170, 0, 0,   0,   0,   0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 128, 128, 128, 128, 64, 64, 64, 64, 32, 32, 32, 32, 16, 16, 16, 16, 8, 8, 8, 8, 8, 4, 4, 4, 4, 4, 2, 3, 2,  2,   1, 1, 1, 1, 1, 1, 2, 2, 4, 4, 8, 8, 8, 8, 8, 7, 0, 0, 0, 0, 0, 0, 0, 0, 0,  0,  0, 0,   0,   0,   0,   0, 0,  0,  0,  0,   0, 0, 0, 0, 0,   0,   0,   0,   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 0, 2, 2, 7, 31,  7, 31,  7, 28,  7, 31,  7, 31,  7, 2, 2, 0, 0, 0, 0,
+                                                                  },
+                                                                  {
+                                                                      0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,   0,   0,  128, 128, 0, 0, 0, 0, 0, 128, 64, 64, 32, 32, 32, 32, 16, 16,  16, 16, 8,  4,  2,  1,  1, 2, 12, 48, 64, 128, 0, 0, 0, 0,  0,  0,  0,  0,  0,  0,  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,   0,   0,   0,   0,   0,   0,   0, 0,   0,   0,   0,   0,   0,   0,   0, 128, 128, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,   0,   0,   0,   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 30, 225, 0, 0, 1, 1, 2, 2, 1, 0, 0, 0, 0, 128, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 128, 0, 48, 48, 0, 192, 193, 193, 194, 4, 8, 16, 32, 64, 128, 0, 0, 0, 128, 128, 128, 128, 64, 64, 64, 64, 32, 32, 32, 32, 16, 16, 16, 16, 8, 8, 8, 8, 8, 196, 4, 196, 4, 196, 2, 194, 2, 194, 1, 1, 1, 1, 0, 0, 0,
+                                                                      0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 128, 112, 12, 3,   0,   0, 0, 0, 0, 0, 0,   12, 12, 12, 13, 1,  0,  64, 160, 33, 34, 18, 17, 17, 17, 9, 8, 8,  8,  8,  4,   4, 8, 8, 16, 16, 16, 16, 16, 17, 15, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 170, 170, 255, 255, 195, 191, 127, 3, 127, 191, 195, 255, 255, 170, 170, 0, 0,   0,   0,   0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 128, 128, 128, 128, 64, 64, 64, 64, 32, 32, 32, 32, 16, 16, 16, 16, 8, 8, 8, 8, 8, 4, 4, 4, 4, 4, 2, 3, 2,  2,   1, 1, 1, 1, 1, 1, 2, 2, 4, 4, 8, 8,   8,   8, 8, 7, 0, 0, 0, 0, 0, 0, 0,   0, 0,  0,  0, 0,   0,   0,   0,   0, 0, 0,  0,  0,  0,   0, 0, 0, 0,   0,   0,   0,   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 0, 2, 2, 7, 31,  7, 31,  7, 28,  7, 31,  7, 31,  7, 2, 2, 0, 0, 0, 0,
+                                                                  },
+                                                                  {
+                                                                      0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,   0,   0,  0, 0, 0, 0, 0, 0, 0, 128, 64, 64, 32, 32, 32, 32, 16, 16,  16, 16, 8,  8,  4,  2,  2, 2, 4, 56, 64, 128, 0, 0, 0, 0,  0,  0,  0,  0,  0,  0,  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,   0,   0,   0,   0,   0,   0,   0, 0,   0,   0,   0,   0,   0,   0,   0, 128, 128, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,   0,   0,   0,   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 28, 226, 1, 1, 2, 2, 2, 2, 1, 0, 0, 0, 0, 128, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 128, 0, 48, 48, 0, 192, 193, 193, 194, 4, 8, 16, 32, 64, 128, 0, 0, 0, 128, 128, 128, 128, 64, 64, 64, 64, 32, 32, 32, 32, 16, 16, 16, 16, 8, 8, 8, 8, 8, 196, 4, 196, 4, 196, 2, 194, 2, 194, 1, 1, 1, 1, 0, 0, 0,
+                                                                      0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 128, 112, 12, 3, 0, 0, 0, 0, 0, 0, 0,   12, 12, 12, 13, 1,  0,  64, 160, 33, 34, 18, 17, 17, 17, 9, 8, 8, 8,  8,  4,   4, 8, 8, 16, 16, 16, 16, 16, 17, 15, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 170, 170, 255, 255, 195, 191, 127, 3, 127, 191, 195, 255, 255, 170, 170, 0, 0,   0,   0,   0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 128, 128, 128, 128, 64, 64, 64, 64, 32, 32, 32, 32, 16, 16, 16, 16, 8, 8, 8, 8, 8, 4, 4, 4, 4, 4, 2, 3, 2,  2,   1, 1, 1, 1, 1, 1, 2, 2, 4, 4, 8, 8,   8,   8, 8, 7, 0, 0, 0, 0, 0, 0, 0,   0, 0,  0,  0, 0,   0,   0,   0,   0, 0, 0,  0,  0,  0,   0, 0, 0, 0,   0,   0,   0,   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 0, 2, 2, 7, 31,  7, 31,  7, 28,  7, 31,  7, 31,  7, 2, 2, 0, 0, 0, 0,
+                                                                  }};
+        static const char PROGMEM prep[][ANIM_SIZE]            = {{
+            0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,   0,   0,  128, 128, 0, 0,  0, 0, 0,   128, 64,  64,  32,  32, 32, 32, 16, 16, 16, 16, 8,  4,  2,  1,  1, 2, 12, 48, 64, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,   0,   0,   0,   0,   0,   0,   0, 0,   0,   0,   0,   0,   0,   0,   0, 128, 128, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,   0,   0,   0,   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 30, 225, 0, 0, 1, 1, 2, 2, 129, 128, 128, 0, 0, 128, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 128, 0, 48, 48, 0, 0, 1, 225, 26, 6, 9, 49, 53, 1, 138, 124, 0, 0, 128, 128, 128, 128, 64, 64, 64, 64, 32, 32, 32, 32, 16, 16, 16, 16, 8, 8, 8, 8, 8, 196, 4, 196, 4, 196, 2, 194, 2, 194, 1, 1, 1, 1, 0, 0, 0,
+            0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 128, 112, 12, 3,   0,   0, 24, 6, 5, 152, 153, 132, 195, 124, 65, 65, 64, 64, 32, 33, 34, 18, 17, 17, 17, 9, 8, 8,  8,  8,  4,   4, 4, 4, 4, 4, 2, 2, 2, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 170, 170, 255, 255, 195, 191, 127, 3, 127, 191, 195, 255, 255, 170, 170, 0, 0,   0,   0,   0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 128, 128, 128, 128, 64, 64, 64, 64, 32, 32, 32, 32, 16, 16, 16, 16, 8, 8, 8, 8, 8, 4, 4, 4, 4, 4, 2, 3, 2,  2,   1, 1, 1, 1, 1, 1, 0,   0,   0,   0, 0, 0,   0,   0, 0, 0, 0, 0, 0, 0, 0, 0, 0,   0, 0,  0,  0, 0, 0, 0,   0,  0, 0, 0,  0,  0, 0,   0,   0, 0, 0,   0,   0,   0,   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 0, 2, 2, 7, 31,  7, 31,  7, 28,  7, 31,  7, 31,  7, 2, 2, 0, 0, 0, 0,
+        }};
+        static const char PROGMEM tap[TAP_FRAMES][ANIM_SIZE]   = {
+            {
+                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,   0,   0,  128, 128, 0, 0,  0, 0, 0,   128, 64,  64, 32,  32, 32, 32, 16, 16, 16, 16, 8,  4,  2,  1,  1, 2, 12, 48, 64, 128, 0, 0, 0, 0,  0,  0,  0,  248, 248, 248, 248, 0,  0,   0,   0,   0,   128, 128, 0,  0,  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,   0,   0,   0,   0,   0,   0,   0, 0,   0,   0,   0,   0,   0,   0,   0, 128, 128, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,   0,   0,   0,   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 30, 225, 0, 0, 1, 1, 2, 2, 129, 128, 128, 0, 0, 128, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 128, 0, 48, 48, 0, 0, 1, 1, 2, 4, 8, 16, 32, 67, 135, 7, 1, 0, 184, 188, 190, 159, 95, 95, 79, 76, 32, 32, 32, 32, 16, 16, 16, 16, 8, 8, 8, 8, 8, 196, 4, 196, 4, 196, 2, 194, 2, 194, 1, 1, 1, 1, 0, 0, 0,
+                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 128, 112, 12, 3,   0,   0, 24, 6, 5, 152, 153, 132, 67, 124, 65, 65, 64, 64, 32, 33, 34, 18, 17, 17, 17, 9, 8, 8,  8,  8,  4,   4, 8, 8, 16, 16, 16, 16, 16,  17,  15,  1,   61, 124, 252, 252, 252, 252, 252, 60, 12, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 170, 170, 255, 255, 195, 191, 127, 3, 127, 191, 195, 255, 255, 170, 170, 0, 0,   0,   0,   0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 128, 128, 128, 128, 64, 64, 64, 64, 32, 32, 32, 32, 16, 16, 16, 16, 8, 8, 8, 8, 8, 4, 4, 4, 4, 4, 2, 3, 2,  2,   1, 1, 1, 1, 1, 1, 0,   0,   0,   0, 0, 0,   0,   0, 0, 0, 0, 0, 0, 0, 0, 0, 0,   0, 0,  0,  0, 0, 0, 0, 0, 0, 0, 0,  0,  0,  0,   0, 0, 0, 0,   0,   1,   3,   3,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 0, 2, 2, 7, 31,  7, 31,  7, 28,  7, 31,  7, 31,  7, 2, 2, 0, 0, 0, 0,
+            },
+            {
+                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,   0,   0,  128, 128, 0, 0, 0, 0, 0, 128, 64, 64, 32, 32, 32, 32, 16, 16,  16, 16, 8,  4,  2,  1,  1, 2, 12, 48, 64, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,   0,   0,   0,   0,   0,   0,   0, 0,   0,   0,   0,   0,   0,   0,   0, 128, 128, 128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,   0,   0,   0,   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 30,  225, 0,   0,   1,   1,   2,  2,  1, 0, 0, 0, 0, 128, 128, 0, 0, 0, 0, 0, 0, 0,  0,  0,   128, 0,   48,  48,  0,   0, 1, 225, 26, 6, 9, 49, 53, 1, 138, 124, 0, 0, 128, 128, 128, 128, 64, 64, 64, 64, 32, 32, 32, 32, 16, 16, 16, 16, 8, 8, 8, 8, 8, 196, 4, 196, 4, 196, 2, 194, 2, 194, 1, 1, 1, 1, 0, 0, 0,
+                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 128, 112, 12, 3,   0,   0, 0, 0, 0, 0, 0,   0,  0,  0,  1,  1,  0,  64, 160, 33, 34, 18, 17, 17, 17, 9, 8, 8,  8,  8,  4,   4, 4, 4, 4, 4, 2, 2, 2, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 170, 170, 255, 255, 195, 191, 127, 3, 127, 191, 195, 255, 255, 170, 170, 0, 0,   0,   0,   0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 128, 128, 128, 128, 64, 64, 64, 64, 32, 32, 32, 32, 16, 16, 16, 16, 8, 8, 8, 8, 8, 4, 4, 4, 4, 4, 2, 3, 122, 122, 121, 121, 121, 121, 57, 49, 2, 2, 4, 4, 8, 8,   8,   8, 8, 7, 0, 0, 0, 48, 60, 124, 124, 126, 126, 126, 126, 0, 0, 0,   0,  0, 0, 0,  0,  0, 0,   0,   0, 0, 0,   0,   0,   0,   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 0, 2, 2, 7, 31,  7, 31,  7, 28,  7, 31,  7, 31,  7, 2, 2, 0, 0, 0, 0,
+            },
+        };
+
+        // assumes 1 frame prep stage
+        void animation_phase(void) {
+            if (get_current_wpm() <= IDLE_SPEED) {
+                current_idle_frame = (current_idle_frame + 1) % IDLE_FRAMES;
+                oled_write_raw_P(idle[abs((IDLE_FRAMES - 1) - current_idle_frame)], ANIM_SIZE);
+            }
+            if (get_current_wpm() > IDLE_SPEED && get_current_wpm() < TAP_SPEED) {
+                // oled_write_raw_P(prep[abs((PREP_FRAMES-1)-current_prep_frame)], ANIM_SIZE); // uncomment if IDLE_FRAMES >1
+                oled_write_raw_P(prep[0], ANIM_SIZE);  // remove if IDLE_FRAMES >1
+            }
+            if (get_current_wpm() >= TAP_SPEED) {
+                current_tap_frame = (current_tap_frame + 1) % TAP_FRAMES;
+                oled_write_raw_P(tap[abs((TAP_FRAMES - 1) - current_tap_frame)], ANIM_SIZE);
+            }
+        }
+        if (get_current_wpm() != 000) {
+            oled_on();  // not essential but turns on animation OLED with any alpha keypress
+            if (timer_elapsed32(anim_timer) > ANIM_FRAME_DURATION) {
+                anim_timer = timer_read32();
+                animation_phase();
+            }
+            anim_sleep = timer_read32();
+        } else {
+            if (timer_elapsed32(anim_sleep) > OLED_TIMEOUT) {
+                oled_off();
+            } else {
+                if (timer_elapsed32(anim_timer) > ANIM_FRAME_DURATION) {
+                    anim_timer = timer_read32();
+                    animation_phase();
+                }
+            }
+        }
+    }
+
+    render_anim();
+    oled_set_cursor(0, 0);
+    oled_write(get_u8_str(get_current_wpm(), '0'), false);
+    return true;
+}
+
+oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_180; };
+#endif

keyboards/ll3macorn/bongopad/bongopad.h

@@ -0,0 +1,18 @@
+// Copyright 2021 Ll3macorn (@ll3macorn)
+// SPDX-License-Identifier: GPL-2.0-or-later
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_default( \
+	K00,           \
+	K10, K11, K12, \
+	K20, K21, K22, \
+	K30, K31, K32  \
+) { \
+	{ K00,   KC_NO, KC_NO }, \
+	{ K10,   K11,   K12 }, \
+	{ K20,   K21,   K22 }, \
+	{ K30,   K31,   K32 }  \
+}
+

keyboards/ll3macorn/bongopad/config.h

@@ -0,0 +1,40 @@
+// Copyright 2021 Ll3macorn (@ll3macorn)
+// SPDX-License-Identifier: GPL-2.0-or-later
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x3728
+#define PRODUCT_ID      0x2949
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Ll3macorn
+#define PRODUCT         BongoPad
+
+/* bootmagic */
+#define BOOTMAGIC_LITE_ROW 1
+#define BOOTMAGIC_LITE_COLUMN 0
+
+/* rgb underglow */
+#define RGB_DI_PIN E6
+#define RGBLED_NUM 6
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 3
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { F7, D7, C6, D4 }
+#define MATRIX_COL_PINS { F4, F5, F6 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* encoders */
+#define ENCODERS_PAD_A { B1 }
+#define ENCODERS_PAD_B { B3 }
+
+/* misc */
+#define LAYER_STATE_8BIT
+#define NO_ACTION_TAPPING

keyboards/ll3macorn/bongopad/keymaps/default/keymap.c

@@ -0,0 +1,41 @@
+// Copyright 2021 Ll3macorn (@ll3macorn)
+// SPDX-License-Identifier: GPL-2.0-or-later
+#include QMK_KEYBOARD_H
+
+enum layers {
+    Layer1,
+    Layer2,
+    Layer3,
+    Layer4
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[Layer1] = LAYOUT_default(
+		KC__MUTE, 
+		KC_7, KC_8, KC_9, 
+		KC_4, KC_5, KC_6, 
+		KC_1, KC_2, KC_3),
+
+    [Layer2] = LAYOUT_default(
+		KC_SPC, 
+		KC_SPC, KC_SPC, KC_SPC, 
+		KC_SPC, KC_SPC, KC_SPC, 
+		KC_SPC, KC_SPC, KC_SPC),
+
+    [Layer3] = LAYOUT_default(
+		KC_SPC, 
+		KC_SPC, KC_SPC, KC_SPC, 
+		KC_SPC, KC_SPC, KC_SPC, 
+		KC_SPC, KC_SPC, KC_SPC),
+
+    [Layer4] = LAYOUT_default(
+		KC_SPC, 
+		KC_SPC, KC_SPC, KC_SPC, 
+		KC_SPC, KC_SPC, KC_SPC, 
+		KC_SPC, KC_SPC, KC_SPC)
+
+};
+
+// clang-format on
+

keyboards/ll3macorn/bongopad/keymaps/default/rules.mk

@@ -0,0 +1,3 @@
+LTO_ENABLE = yes
+COMBO_ENABLE = no
+

keyboards/ll3macorn/bongopad/readme.md

@@ -0,0 +1,10 @@
+# BongoPad
+
+* Keyboard Maintainer: [Ll3macorn](https://github.com/Ll3macorn)
+* Hardware Supported: Pro micro
+
+Make example for this keyboard (after setting up your build environment):
+
+    make ll3macorn/bongopad:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/ll3macorn/bongopad/rules.mk

@@ -0,0 +1,25 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+ENCODER_ENABLE = yes
+OLED_ENABLE = yes
+OLED_DRIVER = SSD1306
+WPM_ENABLE = yes

keyboards/makrosu/config.h

@@ -34,9 +34,8 @@
 #define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5}
 #define UNUSED_PINS
 
-#define ENCODERS_PAD_A { D1 }
-#define ENCODERS_PAD_B { E6 }
-#define ENCODER_DIRECTION_FLIP
+#define ENCODERS_PAD_A { E6 }
+#define ENCODERS_PAD_B { D1 }
 #define TAP_CODE_DELAY 10 
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW

keyboards/planck/keymaps/mnil/keymap.c

@@ -29,8 +29,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 ),
 
 [_QWERTY] = LAYOUT_planck_2x2u(
-    KC_TRNS, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    SE_AA,
-    KC_TRNS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    SE_OSLH, SE_AE,
+    KC_TRNS, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    SE_ARNG,
+    KC_TRNS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    SE_ODIA, SE_ADIA,
     KC_TRNS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_TRNS,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS,          KC_TRNS,       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
 ),
@@ -38,7 +38,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [_SYMBOLS] = LAYOUT_planck_2x2u(
     KC_TRNS, KC_NO,   SE_PIPE, SE_LBRC, SE_RBRC, KC_NO,   S(KC_5), SE_QUES, SE_AT,   SE_EQL,  SE_DLR,  KC_BSPC,
     KC_TRNS, SE_LCBR, SE_RCBR, SE_LPRN, SE_RPRN, KC_NO,   SE_PLUS, S(KC_1), S(KC_2), S(KC_3), SE_AMPR, KC_QUOT,
-    KC_TRNS, M_TILD,  M_CIRC,  SE_LESS, SE_GRTR, KC_NO,   SE_APOS, SE_SLSH, SE_BSLS, SE_ASTR, M_BTCK,  KC_ENT,
+    KC_TRNS, M_TILD,  M_CIRC,  SE_LABK, SE_RABK, KC_NO,   SE_QUOT, SE_SLSH, SE_BSLS, SE_ASTR, M_BTCK,  KC_ENT,
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS,          KC_TRNS,       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
 ),
 

keyboards/ploopyco/mouse/mouse.c

@@ -66,7 +66,24 @@ uint8_t  OptLowPin         = OPT_ENC1;
 bool     debug_encoder     = false;
 bool     is_drag_scroll    = false;
 
-void process_wheel(report_mouse_t* mouse_report) {
+__attribute__((weak)) bool encoder_update_user(uint8_t index, bool clockwise) { return true; }
+
+bool encoder_update_kb(uint8_t index, bool clockwise) {
+    if (!encoder_update_user(index, clockwise)) {
+        return false;
+    }
+#ifdef MOUSEKEY_ENABLE
+    tap_code(clockwise ? KC_WH_U : KC_WH_D);
+#else
+    mouse_report_t mouse_report = pointing_device_get_report();
+    mouse_report.v = clockwise ? 1 : -1;
+    pointing_device_set_report(mouse_report);
+    pointing_device_send();
+#endif
+    return true;
+}
+
+void process_wheel(void) {
     // Lovingly ripped from the Ploopy Source
 
     // If the mouse wheel was just released, do not scroll.
@@ -94,11 +111,11 @@ void process_wheel(report_mouse_t* mouse_report) {
     int dir = opt_encoder_handler(p1, p2);
 
     if (dir == 0) return;
-    mouse_report->v = (int8_t)(dir * OPT_SCALE);
+    encoder_update_kb(0, dir == 1);
 }
 
-__attribute__((weak)) report_mouse_t pointing_device_task_kb(report_mouse_t mouse_report) {
-    process_wheel(&mouse_report);
+report_mouse_t pointing_device_task_kb(report_mouse_t mouse_report) {
+    process_wheel();
 
     if (is_drag_scroll) {
         mouse_report.h = mouse_report.x;

keyboards/ploopyco/mouse/mouse.h

@@ -28,16 +28,16 @@
 #define OPT_ENC1_MUX 0
 #define OPT_ENC2_MUX 4
 
-void process_wheel(report_mouse_t* mouse_report);
+void process_wheel(void);
 
 #define LAYOUT(BLL, BL, BM, BR, BRR, BF, BB, BDPI) \
     { {BL, BM, BR, BF, BB, BRR, BLL, BDPI}, }
 
 typedef union {
-  uint32_t raw;
-  struct {
-    uint8_t    dpi_config;
-  };
+    uint32_t raw;
+    struct {
+        uint8_t dpi_config;
+    };
 } keyboard_config_t;
 
 extern keyboard_config_t keyboard_config;
@@ -56,3 +56,6 @@ enum ploopy_keycodes {
     PLOOPY_SAFE_RANGE,
 #endif
 };
+
+bool encoder_update_user(uint8_t index, bool clockwise);
+bool encoder_update_kb(uint8_t index, bool clockwise);

keyboards/ploopyco/mouse/rules.mk

@@ -25,5 +25,8 @@ POINTING_DEVICE_ENABLE = yes
 POINTING_DEVICE_DRIVER = pmw3360
 MOUSEKEY_ENABLE = yes       # Mouse keys
 
+ENCODER_ENABLE := no
+OPTS_DEF += -DENCODER_ENABLE
+
 QUANTUM_LIB_SRC += analog.c
 SRC += opt_encoder.c

keyboards/ploopyco/trackball/rules.mk

@@ -22,6 +22,9 @@ POINTING_DEVICE_ENABLE = yes
 POINTING_DEVICE_DRIVER = pmw3360
 MOUSEKEY_ENABLE = yes       # Mouse keys
 
+ENCODER_ENABLE := no
+OPTS_DEF += -DENCODER_ENABLE
+
 QUANTUM_LIB_SRC += analog.c
 SRC += opt_encoder.c
 

keyboards/ploopyco/trackball/trackball.c

@@ -31,7 +31,8 @@
 #    define OPT_SCALE 1  // Multiplier for wheel
 #endif
 #ifndef PLOOPY_DPI_OPTIONS
-#    define PLOOPY_DPI_OPTIONS { 1200, 1600, 2400 }
+#    define PLOOPY_DPI_OPTIONS \
+        { 1200, 1600, 2400 }
 #    ifndef PLOOPY_DPI_DEFAULT
 #        define PLOOPY_DPI_DEFAULT 1
 #    endif
@@ -40,10 +41,10 @@
 #    define PLOOPY_DPI_DEFAULT 0
 #endif
 #ifndef PLOOPY_DRAGSCROLL_DPI
-#    define PLOOPY_DRAGSCROLL_DPI 100 // Fixed-DPI Drag Scroll
+#    define PLOOPY_DRAGSCROLL_DPI 100  // Fixed-DPI Drag Scroll
 #endif
 #ifndef PLOOPY_DRAGSCROLL_MULTIPLIER
-#    define PLOOPY_DRAGSCROLL_MULTIPLIER 0.75 // Variable-DPI Drag Scroll
+#    define PLOOPY_DRAGSCROLL_MULTIPLIER 0.75  // Variable-DPI Drag Scroll
 #endif
 
 keyboard_config_t keyboard_config;
@@ -65,7 +66,24 @@ uint8_t  OptLowPin         = OPT_ENC1;
 bool     debug_encoder     = false;
 bool     is_drag_scroll    = false;
 
-void process_wheel(report_mouse_t* mouse_report) {
+__attribute__((weak)) bool encoder_update_user(uint8_t index, bool clockwise) { return true; }
+
+bool encoder_update_kb(uint8_t index, bool clockwise) {
+    if (!encoder_update_user(index, clockwise)) {
+        return false;
+    }
+#ifdef MOUSEKEY_ENABLE
+    tap_code(clockwise ? KC_WH_U : KC_WH_D);
+#else
+    mouse_report_t mouse_report = pointing_device_get_report();
+    mouse_report.v = clockwise ? 1 : -1;
+    pointing_device_set_report(mouse_report);
+    pointing_device_send();
+#endif
+    return true;
+}
+
+void process_wheel(void) {
     // TODO: Replace this with interrupt driven code,  polling is S L O W
     // Lovingly ripped from the Ploopy Source
 
@@ -94,11 +112,11 @@ void process_wheel(report_mouse_t* mouse_report) {
     int dir = opt_encoder_handler(p1, p2);
 
     if (dir == 0) return;
-    mouse_report->v = (int8_t)(dir * OPT_SCALE);
+    encoder_update_kb(0, dir == 1);
 }
 
 report_mouse_t pointing_device_task_kb(report_mouse_t mouse_report) {
-    process_wheel(&mouse_report);
+    process_wheel();
 
     if (is_drag_scroll) {
         mouse_report.h = mouse_report.x;

keyboards/ploopyco/trackball/trackball.h

@@ -61,3 +61,6 @@ enum ploopy_keycodes {
     PLOOPY_SAFE_RANGE,
 #endif
 };
+
+bool encoder_update_user(uint8_t index, bool clockwise);
+bool encoder_update_kb(uint8_t index, bool clockwise);

keyboards/ploopyco/trackball_mini/rules.mk

@@ -20,7 +20,10 @@ RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output
 POINTING_DEVICE_ENABLE = yes
 POINTING_DEVICE_DRIVER = adns5050
-MOUSEKEY_ENABLE = no        # Mouse keys
+MOUSEKEY_ENABLE = yes        # Mouse keys
+
+ENCODER_ENABLE := no
+OPTS_DEF += -DENCODER_ENABLE
 
 QUANTUM_LIB_SRC += analog.c
 SRC += opt_encoder.c

keyboards/ploopyco/trackball_mini/trackball_mini.c

@@ -45,11 +45,11 @@
 #    define PLOOPY_DRAGSCROLL_DPI 375  // Fixed-DPI Drag Scroll
 #endif
 #ifndef PLOOPY_DRAGSCROLL_MULTIPLIER
-#    define PLOOPY_DRAGSCROLL_MULTIPLIER 0.75 // Variable-DPI Drag Scroll
+#    define PLOOPY_DRAGSCROLL_MULTIPLIER 0.75  // Variable-DPI Drag Scroll
 #endif
 
 keyboard_config_t keyboard_config;
-uint16_t dpi_array[] = PLOOPY_DPI_OPTIONS;
+uint16_t          dpi_array[] = PLOOPY_DPI_OPTIONS;
 #define DPI_OPTION_SIZE (sizeof(dpi_array) / sizeof(uint16_t))
 
 // TODO: Implement libinput profiles
@@ -58,23 +58,38 @@ uint16_t dpi_array[] = PLOOPY_DPI_OPTIONS;
 // Valid options are ACC_NONE, ACC_LINEAR, ACC_CUSTOM, ACC_QUADRATIC
 
 // Trackball State
-bool is_scroll_clicked = false;
-bool BurstState = false;  // init burst state for Trackball module
-uint16_t MotionStart = 0;  // Timer for accel, 0 is resting state
-uint16_t lastScroll = 0;  // Previous confirmed wheel event
-uint16_t lastMidClick = 0;  // Stops scrollwheel from being read if it was pressed
-uint8_t OptLowPin = OPT_ENC1;
-bool debug_encoder = false;
+bool     is_scroll_clicked = false;
+bool     BurstState        = false;  // init burst state for Trackball module
+uint16_t MotionStart       = 0;      // Timer for accel, 0 is resting state
+uint16_t lastScroll        = 0;      // Previous confirmed wheel event
+uint16_t lastMidClick      = 0;      // Stops scrollwheel from being read if it was pressed
+uint8_t  OptLowPin         = OPT_ENC1;
+bool     debug_encoder     = false;
 bool     is_drag_scroll    = false;
 
-void process_wheel(report_mouse_t* mouse_report) {
+__attribute__((weak)) bool encoder_update_user(uint8_t index, bool clockwise) { return true; }
+
+bool encoder_update_kb(uint8_t index, bool clockwise) {
+    if (!encoder_update_user(index, clockwise)) {
+        return false;
+    }
+#ifdef MOUSEKEY_ENABLE
+    tap_code(clockwise ? KC_WH_U : KC_WH_D);
+#else
+    mouse_report_t mouse_report = pointing_device_get_report();
+    mouse_report.v = clockwise ? 1 : -1;
+    pointing_device_set_report(mouse_report);
+    pointing_device_send();
+#endif
+    return true;
+}
+
+void process_wheel(void) {
     // If the mouse wheel was just released, do not scroll.
-    if (timer_elapsed(lastMidClick) < SCROLL_BUTT_DEBOUNCE)
-        return;
+    if (timer_elapsed(lastMidClick) < SCROLL_BUTT_DEBOUNCE) return;
 
     // Limit the number of scrolls per unit time.
-    if (timer_elapsed(lastScroll) < OPT_DEBOUNCE)
-        return;
+    if (timer_elapsed(lastScroll) < OPT_DEBOUNCE) return;
 
     // Don't scroll if the middle button is depressed.
     if (is_scroll_clicked) {
@@ -87,15 +102,12 @@ void process_wheel(report_mouse_t* mouse_report) {
     uint16_t p1 = adc_read(OPT_ENC1_MUX);
     uint16_t p2 = adc_read(OPT_ENC2_MUX);
 
-    if (debug_encoder)
-        dprintf("OPT1: %d, OPT2: %d\n", p1, p2);
+    if (debug_encoder) dprintf("OPT1: %d, OPT2: %d\n", p1, p2);
 
     uint8_t dir = opt_encoder_handler(p1, p2);
 
-    if (dir == 0)
-        return;
-
-    mouse_report->v = (int8_t)(dir * OPT_SCALE);
+    if (dir == 0) return;
+    encoder_update_kb(0, dir == 1);
 }
 
 void pointing_device_init_kb(void) {
@@ -106,6 +118,7 @@ void pointing_device_init_kb(void) {
 }
 
 report_mouse_t pointing_device_task_kb(report_mouse_t mouse_report) {
+    process_wheel();
 
     if (is_drag_scroll) {
         mouse_report.h = mouse_report.x;
@@ -127,12 +140,11 @@ bool process_record_kb(uint16_t keycode, keyrecord_t* record) {
 
     // Update Timer to prevent accidental scrolls
     if ((record->event.key.col == 1) && (record->event.key.row == 0)) {
-        lastMidClick = timer_read();
+        lastMidClick      = timer_read();
         is_scroll_clicked = record->event.pressed;
     }
 
-    if (!process_record_user(keycode, record))
-        return false;
+    if (!process_record_user(keycode, record)) return false;
 
     if (keycode == DPI_CONFIG && record->event.pressed) {
         keyboard_config.dpi_config = (keyboard_config.dpi_config + 1) % DPI_OPTION_SIZE;

keyboards/ploopyco/trackball_mini/trackball_mini.h

@@ -29,16 +29,16 @@
 #define OPT_ENC1_MUX 0
 #define OPT_ENC2_MUX 4
 
-void process_wheel(report_mouse_t* mouse_report);
+void process_wheel(void);
 
 #define LAYOUT(BL, BM, BR, BF, BB) \
     { {BL, BM, BR, BF, BB}, }
 
 typedef union {
-  uint32_t raw;
-  struct {
-    uint8_t dpi_config;
-  };
+    uint32_t raw;
+    struct {
+        uint8_t dpi_config;
+    };
 } keyboard_config_t;
 
 extern keyboard_config_t keyboard_config;
@@ -56,3 +56,6 @@ enum ploopy_keycodes {
     PLOOPY_SAFE_RANGE,
 #endif
 };
+
+bool encoder_update_user(uint8_t index, bool clockwise);
+bool encoder_update_kb(uint8_t index, bool clockwise);

keyboards/ramonimbao/herringbone/pro/config.h

@@ -48,10 +48,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 
 /* Encoder pin assignment */
-#define ENCODERS_PAD_A { C3 }
-#define ENCODERS_PAD_B { C2 }
-
-#define ENCODER_DIRECTION_FLIP
+#define ENCODERS_PAD_A { C2 }
+#define ENCODERS_PAD_B { C3 }
 
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5

keyboards/skippys_custom_pcs/roopad/config.h

@@ -0,0 +1,71 @@
+/*
+Copyright 2020 <contact@vwolf.be>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0x36B6 // skippys_custom_pcs
+#define PRODUCT_ID   0x0001 // RooPad
+#define DEVICE_VER   0x0001 // Version 1
+#define MANUFACTURER    ToastyStoemp
+#define PRODUCT         RooPad
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 5
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+
+// Checked with Eagle Schematic
+#define MATRIX_ROW_PINS { B5, F6, F5, F4, F1 }
+#define MATRIX_COL_PINS { F0, B4, D7, D6, D4 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+#define RGB_DI_PIN B6
+#define RGBLED_NUM 21
+#define RGBLIGHT_SLEEP
+
+#define RGBLIGHT_EFFECT_ALTERNATING
+#define RGBLIGHT_EFFECT_BREATHING
+#define RGBLIGHT_EFFECT_CHRISTMAS
+#define RGBLIGHT_EFFECT_KNIGHT
+#define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#define RGBLIGHT_EFFECT_RGB_TEST
+#define RGBLIGHT_EFFECT_SNAKE
+#define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#define RGBLIGHT_EFFECT_TWINKLE
+
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION

keyboards/skippys_custom_pcs/roopad/info.json

@@ -0,0 +1,10 @@
+{
+    "keyboard_name": "RooPad", 
+    "url": "", 
+    "maintainer": "ToastyStoemp", 
+    "layouts": {
+        "LAYOUT": {
+            "layout": [{"label":"Num Lock", "x":1.5, "y":0}, {"label":"/", "x":2.5, "y":0}, {"label":"*", "x":3.5, "y":0}, {"label":"-", "x":4.5, "y":0}, {"x":0, "y":1}, {"label":"7", "x":1.5, "y":1}, {"label":"8", "x":2.5, "y":1}, {"label":"9", "x":3.5, "y":1}, {"label":"+", "x":4.5, "y":1, "h":2}, {"x":0, "y":2}, {"label":"4", "x":1.5, "y":2}, {"label":"5", "x":2.5, "y":2}, {"label":"6", "x":3.5, "y":2}, {"x":0, "y":3}, {"label":"1", "x":1.5, "y":3}, {"label":"2", "x":2.5, "y":3}, {"label":"3", "x":3.5, "y":3}, {"label":"Enter", "x":4.5, "y":3, "h":2}, {"x":0, "y":4}, {"label":"0", "x":1.5, "y":4, "w":2}, {"label":".", "x":3.5, "y":4}]
+        }
+    }
+}

keyboards/skippys_custom_pcs/roopad/keymaps/default/keymap.c

@@ -0,0 +1,67 @@
+/*
+Copyright 2020 <contact@vwolf.be>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+enum layers {
+    _LAYER0,
+    _LAYER1,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    /*
+    *       ┌───┬───┬───┬───┐
+    *       │Num│ / │ * │ - │
+    * ┌───┬─┼───┼───┼───┼───┤
+    * │Cal│ │ 7 │ 8 │ 9 │   │
+    * ├───┼─┼───┼───┼───┤ + │
+    * │WWW│ │ 4 │ 5 │ 6 │   │
+    * ├───┼─┼───┼───┼───┼───┤
+    * │Mai│ │ 1 │ 2 │ 3 │ E │
+    * ├───┼─┼───┴───┼───┤ N │
+    * │FN │ │   0   │ . │ T │
+    * └───┴─┴───────┴───┴───┘
+    */
+
+    [_LAYER0] = LAYOUT(
+                 KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_CALC, KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
+        KC_WSCH, KC_P4,   KC_P5,   KC_P6,
+        KC_MAIL, KC_P1,   KC_P2,   KC_P3,   KC_PENT,
+        MO(1),   KC_P0,            KC_PDOT     
+    ),
+
+    /*
+    *       ┌───┬───┬───┬───┐
+    *       │Num│ / │ * │-BR│
+    * ┌───┬─┼───┼───┼───┼───┤
+    * │   │ │F7 │F8 │F9 │   │
+    * ├───┼─┼───┼───┼───┤+BR│
+    * │   │ │F4 │F5 │F6 │   │
+    * ├───┼─┼───┼───┼───┼───┤
+    * │   │ │F1 │F2 │F3 │RGB│
+    * ├───┼─┼───┴───┼───┤   │
+    * │FN │ │       │TOG│MOD│
+    * └───┴─┴───────┴───┴───┘
+    */
+
+    [_LAYER1] = LAYOUT(
+                 KC_NLCK, KC_PSLS, KC_PAST, RGB_VAD,
+        KC_TRNS, KC_F7,   KC_F8,   KC_F9,   RGB_VAI,
+        KC_TRNS, KC_F4,   KC_F5,   KC_F6,
+        KC_TRNS, KC_F1,   KC_F2,   KC_F3,   RGB_MOD,
+        KC_TRNS, KC_TRNS,          RGB_TOG     
+    )
+};

keyboards/skippys_custom_pcs/roopad/keymaps/via/keymap.c

@@ -0,0 +1,85 @@
+/*
+Copyright 2020 <contact@vwolf.be>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+enum layers {
+    _LAYER0,
+    _LAYER1,
+    _LAYER2,
+    _LAYER3,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    /*
+    *       ┌───┬───┬───┬───┐
+    *       │Num│ / │ * │ - │
+    * ┌───┬─┼───┼───┼───┼───┤
+    * │Cal│ │ 7 │ 8 │ 9 │   │
+    * ├───┼─┼───┼───┼───┤ + │
+    * │WWW│ │ 4 │ 5 │ 6 │   │
+    * ├───┼─┼───┼───┼───┼───┤
+    * │Mai│ │ 1 │ 2 │ 3 │ E │
+    * ├───┼─┼───┴───┼───┤ N │
+    * │FN │ │   0   │ . │ T │
+    * └───┴─┴───────┴───┴───┘
+    */
+
+    [_LAYER0] = LAYOUT(
+                 KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_CALC, KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
+        KC_WSCH, KC_P4,   KC_P5,   KC_P6,
+        KC_MAIL, KC_P1,   KC_P2,   KC_P3,   KC_PENT,
+        MO(1),   KC_P0,            KC_PDOT     
+    ),
+
+    /*
+    *       ┌───┬───┬───┬───┐
+    *       │Num│ / │ * │-BR│
+    * ┌───┬─┼───┼───┼───┼───┤
+    * │   │ │F7 │F8 │F9 │   │
+    * ├───┼─┼───┼───┼───┤+BR│
+    * │   │ │F4 │F5 │F6 │   │
+    * ├───┼─┼───┼───┼───┼───┤
+    * │   │ │F1 │F2 │F3 │RGB│
+    * ├───┼─┼───┴───┼───┤   │
+    * │FN │ │       │TOG│MOD│
+    * └───┴─┴───────┴───┴───┘
+    */
+
+    [_LAYER1] = LAYOUT(
+                 KC_NLCK, KC_PSLS, KC_PAST, RGB_VAD,
+        KC_TRNS, KC_F7,   KC_F8,   KC_F9,   RGB_VAI,
+        KC_TRNS, KC_F4,   KC_F5,   KC_F6,
+        KC_TRNS, KC_F1,   KC_F2,   KC_F3,   RGB_MOD,
+        KC_TRNS, KC_TRNS,          RGB_TOG     
+    ),
+
+    [_LAYER2] = LAYOUT(
+                 KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS,          KC_TRNS     
+    ),
+
+    [_LAYER3] = LAYOUT(
+                 KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS,          KC_TRNS     
+    )
+};

keyboards/skippys_custom_pcs/roopad/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/skippys_custom_pcs/roopad/readme.md

@@ -0,0 +1,22 @@
+# kuku65
+
+The following is the QMK Firmware for the kuku65 Hotswap PCB.
+
+The PCB features:
+* QMK & VIA compatibility
+* Hotswap
+
+---
+
+* Keyboard Maintainer: [ToastyStoemp](https://github.com/ToastyStoemp)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make wolf/kuku65:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader Enter the bootloader in 3 ways: 
+* **Bootmagic reset**: Hold down the key ESC key and plug in the keyboard (Top Left most switch)
+* **Physical reset button**: Briefly press the button on the back of the PCB
+* **Keycode in layout**: Press the B key on layer 1 which is mapped to `RESET`

keyboards/skippys_custom_pcs/roopad/roopad.c

@@ -0,0 +1,14 @@
+/*
+Copyright 2020 <contact@vwolf.be>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "roopad.h"

keyboards/skippys_custom_pcs/roopad/roopad.h

@@ -0,0 +1,32 @@
+/*
+Copyright 2020 <contact@vwolf.be>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "quantum.h"
+
+/* RooPad Keymap Definitions */
+#define LAYOUT( \
+         K01, K02, K03, K04, \
+    K10, K11, K12, K13, K14, \
+    K20, K21, K22, K23,      \
+    K30, K31, K32, K33, K34, \
+    K40, K41,      K43       \
+) { \
+    { KC_NO, K01, K02,   K03, K04    }, \
+    { K10,   K11, K12,   K13, K14    }, \
+    { K20,   K21, K22,   K23, KC_NO  }, \
+    { K30,   K31, K32,   K33, K34    }, \
+    { K40,   K41, KC_NO, K43, KC_NO  }  \
+}

keyboards/skippys_custom_pcs/roopad/rules.mk

@@ -0,0 +1,24 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency
+F_CPU = 8000000
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes     # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = no       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output

keyboards/space_space/rev2/config.h

@@ -41,12 +41,11 @@
 
 /* ROTARY ENCODERS */
 #define ENCODERS_PAD_A \
-    { D7, F7 }
-#define ENCODERS_PAD_B \
     { B4, C7 }
+#define ENCODERS_PAD_B \
+    { D7, F7 }
 
 #define ENCODER_RESOLUTION 3
-#define ENCODER_DIRECTION_FLIP
 
 #define DEBOUNCE 5
 

keyboards/synapse/config.h

@@ -41,12 +41,11 @@
 
 /* ROTARY ENCODERS */
 #define ENCODERS_PAD_A \
-    { D6, C6 }
-#define ENCODERS_PAD_B \
     { D7, C7 }
+#define ENCODERS_PAD_B \
+    { D6, C6 }
 
 #define ENCODER_RESOLUTION 4
-#define ENCODER_DIRECTION_FLIP
 
 #define DEBOUNCE 5
 

keyboards/xiudi/xd60/keymaps/finnish/keymap.c

@@ -0,0 +1,25 @@
+// Copyright 2021 Minna Pallari (@pallarim)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+#include "keymap_finnish.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  // 0: Base Layer
+  LAYOUT_all(
+      KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    FI_PLUS,  FI_ACUT,  MO(1), KC_BSPC,
+      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    FI_ARNG,  FI_DIAE,           KC_NO,
+      KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    FI_ODIA, FI_ADIA, FI_QUOT,             KC_ENT,
+      KC_LSFT, FI_LABK,   KC_Z,    KC_X,    KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH,  KC_RSFT, KC_UP,    FI_MINS,
+      KC_LCTL, KC_LGUI, KC_LALT,                          KC_SPC,                          KC_RALT, KC_RCTL,    KC_LEFT, KC_DOWN,  KC_RIGHT),
+
+  // 1: Function Layer
+  LAYOUT_all(
+      RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,   KC_F10,  KC_F11,   KC_F12,  KC_F13,   KC_F14,
+      KC_NO,   KC_WH_U, KC_UP,   KC_WH_D, KC_BSPC,KC_HOME,KC_CALC,KC_NO,  KC_INS, KC_NO,   KC_PSCR, KC_SLCK,  KC_PAUS,           KC_DEL,
+      KC_NO,   KC_LEFT, KC_DOWN, KC_RIGHT,KC_DEL, KC_END, KC_PGDN,KC_NO,  KC_NO,  KC_NO,   KC_HOME, KC_PGUP,  KC_NO,             KC_ENT,
+      KC_LSFT, KC_NO,   KC_NO,   KC_APP,  BL_STEP,KC_NO,  KC_NO,  KC_VOLD,KC_VOLU,KC_MUTE, KC_END,  KC_PGDN,  KC_RSFT, KC_PGUP,  KC_INS,
+      KC_LCTL, KC_LGUI, KC_LALT,                          KC_SPC,                          KC_RGUI, MO(1),    KC_HOME, KC_PGDOWN,KC_END),
+
+};

keyboards/xiudi/xd60/keymaps/finnish/readme.md

@@ -0,0 +1,20 @@
+# Finnish/Swedish iso Keymap for XIUDI's XD60 PCB
+
+FI/SV iso Keymap for XD60.
+
+## Keymap
+
+### Base Layer
+
+![Base layer](https://i.imgur.com/TrChS0N.png)
+
+### Function Layer
+
+![Default Keymap layer 2](https://img.alicdn.com/imgextra/i1/1713761720/TB2K0gTalPxQeBjy1XcXXXHzVXa_!!1713761720.png)
+
+## Build
+
+To build the default keymap, simply run:
+
+    make xiudi/xd60/rev2:finnish  # XD60 rev2
+    make xiudi/xd60/rev3:finnish  # XD60 rev3

keyboards/z12/config.h

@@ -25,9 +25,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MANUFACTURER    zigotica
 #define PRODUCT         z12
 
-#define ENCODERS_PAD_A { B4, B2 }
-#define ENCODERS_PAD_B { B5, B6 }
-#define ENCODER_DIRECTION_FLIP
+#define ENCODERS_PAD_A { B5, B6 }
+#define ENCODERS_PAD_B { B4, B2 }
 
 /* key matrix size */
 #define MATRIX_ROWS 4

lib/python/qmk/cli/format/c.py

@@ -74,7 +74,7 @@ def filter_files(files, core_only=False):
             # The following statement checks each file to see if the file path is
             # - in the core directories
             # - not in the ignored directories
-            if not any(i in str(file) for i in core_dirs) or any(i in str(file) for i in ignored):
+            if not any(str(file).startswith(i) for i in core_dirs) or any(str(file).startswith(i) for i in ignored):
                 files[index] = None
                 cli.log.debug("Skipping non-core file %s, as '--core-only' is used.", file)
 

tmk_core/protocol/chibios/usb_main.c

@@ -1099,6 +1099,8 @@ void midi_ep_task(void) {
 
 #ifdef VIRTSER_ENABLE
 
+void virtser_init(void) {}
+
 void virtser_send(const uint8_t byte) { chnWrite(&drivers.serial_driver.driver, &byte, 1); }
 
 __attribute__((weak)) void virtser_recv(uint8_t c) {

users/mnil/mnil.c

@@ -86,7 +86,7 @@ void ae_finished(qk_tap_dance_state_t *state, void *user_data) {
             register_code(KC_A);
             break;
         case SINGLE_HOLD:
-            tap_code(SE_AE);
+            tap_code(SE_ADIA);
             break;
         case DOUBLE_SINGLE_TAP:
             tap_code(KC_A);
@@ -113,15 +113,15 @@ void aa_finished(qk_tap_dance_state_t *state, void *user_data) {
     aa_tap_state.state = cur_dance(state);
     switch (aa_tap_state.state) {
         case SINGLE_TAP:
-            register_code(SE_OSLH);
+            register_code(SE_ODIA);
             break;
         case SINGLE_HOLD:
-            register_code(SE_AA);
-            unregister_code(SE_AA);
+            register_code(SE_ARNG);
+            unregister_code(SE_ARNG);
             break;
         case DOUBLE_SINGLE_TAP:
-            tap_code(SE_OSLH);
-            register_code(SE_OSLH);
+            tap_code(SE_ODIA);
+            register_code(SE_ODIA);
             break;
     }
 }
@@ -129,10 +129,10 @@ void aa_finished(qk_tap_dance_state_t *state, void *user_data) {
 void aa_reset(qk_tap_dance_state_t *state, void *user_data) {
     switch (aa_tap_state.state) {
         case SINGLE_TAP:
-            unregister_code(SE_OSLH);
+            unregister_code(SE_ODIA);
             break;
         case DOUBLE_SINGLE_TAP:
-            unregister_code(SE_OSLH);
+            unregister_code(SE_ODIA);
             break;
     }
     aa_tap_state.state = 0;