🔧 create info.json for Infinity Ergodox (#2267)

* 🔧 create info.json for Infinity Ergodox

I'm not sure if the bootloader key is set correctly.

* 🐛 fix layout name

keyboards/atom47/atom47.c

@@ -0,0 +1,31 @@
+#include "atom47.h"
+#include "led.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	matrix_init_user();
+	led_init_ports();
+};
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+	matrix_scan_user();
+};
+
+void led_init_ports(void) {
+    // * Set our LED pins as output
+    DDRB &= ~(1<<5);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // Turn capslock on
+        PORTF |= (1<<5);
+    } else {
+        // Turn capslock off
+        PORTF &= ~(1<<5);
+    }
+	led_set_user(usb_led);
+}

keyboards/atom47/atom47.h

@@ -0,0 +1,25 @@
+#ifndef ATOM47_H
+#define ATOM47_H
+
+#include "quantum.h"
+
+// readability
+#define XXX KC_NO
+
+#define KEYMAP_ANSI( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
+	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a,      k1c, \
+	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a,      k2c, \
+	k30, k31, k32, k33, k34,      k36,      k38, k39, k3a,      k3c \
+) \
+{ \
+    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c}, \
+	{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, XXX, k1c}, \
+	{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, XXX, k2c}, \
+	{k30, k31, k32, k33, k34, XXX, k36, XXX, k38, k39, k3a, XXX, k3c}  \
+}
+
+void matrix_init_user(void);
+void matrix_scan_user(void);
+
+#endif

keyboards/atom47/config.h

@@ -0,0 +1,73 @@
+/*
+Copyright 2012 Maarten Dekkers <atomkeeb@gmail.com
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0003
+#define MANUFACTURER    Vortex
+#define PRODUCT         Core
+#define DESCRIPTION     Atom47 PCB for the Vortex Core
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 13
+
+// ROWS: Top to bottom, COLS: Left to right
+
+#define MATRIX_ROW_PINS {B1,B2,B3,B7}
+#define MATRIX_COL_PINS {D7,D5,F0,F1,F4,F6,F7,D4,C7,C6,D6,B5,B4}
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN B6
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Backlight configuration
+ */
+#define BACKLIGHT_LEVELS 4
+
+#endif
+
+#define RGB_DI_PIN D0    // The pin the LED strip is connected to
+#define RGBLED_NUM 1     // Number of LEDs in your strip
+
+#define QMK_ESC_OUTPUT D7 // usually COL
+#define QMK_ESC_INPUT B1 // usually ROW
+#define QMK_LED B6

keyboards/atom47/keymaps/LEdiodes/atom47.c

@@ -0,0 +1,31 @@
+#include "atom47.h"
+#include "led.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	matrix_init_user();
+	led_init_ports();
+};
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+	matrix_scan_user();
+};
+
+void led_init_ports(void) {
+    // * Set our LED pins as output
+    DDRB &= ~(1<<5);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // Turn capslock on
+        PORTF |= (1<<5);
+    } else {
+        // Turn capslock off
+        PORTF &= ~(1<<5);
+    }
+	led_set_user(usb_led);
+}

keyboards/atom47/keymaps/LEdiodes/atom47.h

@@ -0,0 +1,25 @@
+#ifndef ATOM47_H
+#define ATOM47_H
+
+#include "quantum.h"
+
+// readability
+#define XXX KC_NO
+
+#define KEYMAP_ANSI( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
+	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a,      k1c, \
+	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a,      k2c, \
+	k30, k31, k32, k33, k34,      k36,      k38, k39, k3a,      k3c \
+) \
+{ \
+    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c}, \
+	{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, XXX, k1c}, \
+	{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, XXX, k2c}, \
+	{k30, k31, k32, k33, k34, XXX, k36, XXX, k38, k39, k3a, XXX, k3c}  \
+}
+
+void matrix_init_user(void);
+void matrix_scan_user(void);
+
+#endif

keyboards/atom47/keymaps/LEdiodes/config.h

@@ -0,0 +1,73 @@
+/*
+Copyright 2012 Maarten Dekkers <atomkeeb@gmail.com
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0003
+#define MANUFACTURER    Vortex
+#define PRODUCT         Core
+#define DESCRIPTION     Atom47 PCB for the Vortex Core
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 13
+
+// ROWS: Top to bottom, COLS: Left to right
+
+#define MATRIX_ROW_PINS {B1,B2,B3,B7}
+#define MATRIX_COL_PINS {D7,D5,F0,F1,F4,F6,F7,D4,C7,C6,D6,B5,B4}
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN B6
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Backlight configuration
+ */
+#define BACKLIGHT_LEVELS 4
+
+#endif
+
+#define RGB_DI_PIN D0    // The pin the LED strip is connected to
+#define RGBLED_NUM 1     // Number of LEDs in your strip
+
+#define QMK_ESC_OUTPUT D7 // usually COL
+#define QMK_ESC_INPUT B1 // usually ROW
+#define QMK_LED B6

keyboards/atom47/keymaps/LEdiodes/keymap.c

@@ -0,0 +1,35 @@
+#include QMK_KEYBOARD_H
+
+// These are all aliases for the  function layers.
+#define _L0 0
+#define _L1 1
+#define _L2 2
+#define _L3 3
+
+#define _______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[_L0] = KEYMAP_ANSI(
+  KC_ESC,		KC_Q,		KC_W,		KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_DEL,		KC_BSPC,	\
+  KC_TAB,		KC_A,		KC_S,		KC_D,		KC_F,		KC_G,		KC_H,		KC_J,		KC_K,		KC_L,		KC_SCLN,				KC_ENT,  	\
+  KC_LSFT,		KC_Z,		KC_X,		KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_RSFT,				MO(_L1),	\
+  KC_LCTL,		KC_LGUI,	KC_LALT,	TG(_L3),	KC_SPC, 				KC_SPC,					MO(_L2),	KC_RALT,	KC_APP,					KC_RCTRL),	\
+ 
+[_L2] = KEYMAP_ANSI(
+  _______,		KC_VOLD,	KC_VOLU,	KC_MUTE,	RESET,		_______,	KC_CALC,	KC_PGUP,	KC_UP,		KC_PGDN,	KC_PSCR,	KC_SLCK,	KC_PAUS,	\
+  KC_CAPS,		KC_MPRV,	KC_MPLY,	KC_MNXT,	_______,	_______,	KC_HOME,	KC_LEFT,	KC_DOWN,	KC_RIGHT,	KC_INS,					_______,	\
+  _______,		_______,	_______,	_______,	_______,	_______,	_______,	BL_TOGG,	BL_DEC,		BL_INC,		_______,				_______,	\
+  _______,		_______,	_______,	_______,	_______, 				_______,				_______,	_______,	_______,				_______),	\
+ 
+[_L1] = KEYMAP_ANSI(
+  KC_GRV,		KC_F1,		KC_F2,		KC_F3,		KC_F4,		KC_F5,		KC_F6,		KC_F7,		KC_F8,		KC_F9,		KC_F10,		KC_F11,		KC_F12,		\
+  KC_1,			KC_2,		KC_3,		KC_4,		KC_5,		KC_6,		KC_7,		KC_8,		KC_9,		KC_0,		KC_MINS,				KC_EQL,		\
+  _______,		_______,	_______,	_______,	_______,	KC_QUOT,	KC_SLSH,	KC_LBRC,	KC_RBRC,	KC_BSLS,	KC_RSFT,				_______,	\
+  _______,		_______,	_______,	_______,	_______, 				_______,				_______,	_______,	_______,				_______),	\
+ 
+[_L3] = KEYMAP_ANSI(
+  _______,		_______,	_______,	   KC_7,	   KC_8,	   KC_9,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	\
+  _______,		_______,	_______,	   KC_4,	   KC_5,	   KC_6,	_______,	_______,	_______,	_______,	_______,				_______,	\
+  _______,		_______,	_______,	   KC_1,	   KC_2,	   KC_3,	_______,	_______,	_______,	_______,	_______,				_______,	\
+  _______,		_______,	_______,	   _______,    KC_0,	  KC_DOT, 	        	            _______,	_______,	_______,				RESET),     \
+};

keyboards/atom47/keymaps/LEdiodes/rules.mk

@@ -0,0 +1,65 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = no   # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE = no 		# MIDI controls
+AUDIO_ENABLE = no
+UNICODE_ENABLE = no 		# Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID

keyboards/atom47/keymaps/default/keymap.c

@@ -0,0 +1,39 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+#define _MA 0 //Main layer
+#define _FN 1 //Fn
+#define _FN1 2 //Fn1
+#define _PN 3 //Pn
+
+#define _______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[_MA] = KEYMAP_ANSI(
+  KC_ESC,		KC_Q,		KC_W,		KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_DEL,		KC_BSPC,	\
+  KC_TAB,		KC_A,		KC_S,		KC_D,		KC_F,		KC_G,		KC_H,		KC_J,		KC_K,		KC_L,		KC_SCLN,				KC_ENT,  	\
+  KC_LSFT,		KC_Z,		KC_X,		KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_RSFT,				MO(_FN1),	\
+  KC_LCTL,		KC_LGUI,	KC_LALT,	MO(_PN),	KC_SPC, 				KC_SPC,					MO(_FN),	KC_RALT,	KC_APP,					KC_RCTRL),	\
+ 
+[_FN] = KEYMAP_ANSI(
+  _______,		KC_VOLD,	KC_VOLU,	KC_MUTE,	RESET,		_______,	KC_CALC,	KC_PGUP,	KC_UP,		KC_PGDN,	KC_PSCR,	KC_SLCK,	KC_PAUS,	\
+  KC_CAPS,		KC_MPRV,	KC_MPLY,	KC_MNXT,	_______,	_______,	KC_HOME,	KC_LEFT,	KC_DOWN,	KC_RIGHT,	KC_INS,					_______,	\
+  _______,		_______,	_______,	_______,	_______,	_______,	_______,	BL_TOGG,	BL_DEC,		BL_INC,		_______,				_______,	\
+  _______,		_______,	_______,	_______,	_______, 				_______,				_______,	_______,	_______,				_______),	\
+ 
+[_FN1] = KEYMAP_ANSI(
+  KC_GRV,		KC_F1,		KC_F2,		KC_F3,		KC_F4,		KC_F5,		KC_F6,		KC_F7,		KC_F8,		KC_F9,		KC_F10,		KC_F11,		KC_F12,		\
+  KC_1,			KC_2,		KC_3,		KC_4,		KC_5,		KC_6,		KC_7,		KC_8,		KC_9,		KC_0,		KC_MINS,				KC_EQL,		\
+  _______,		_______,	_______,	_______,	_______,	KC_QUOT,	KC_SLSH,	KC_LBRC,	KC_RBRC,	KC_BSLS,	KC_RSFT,				_______,	\
+  _______,		_______,	_______,	_______,	_______, 				_______,				_______,	_______,	_______,				_______),	\
+ 
+[_PN] = KEYMAP_ANSI(
+  _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	\
+  _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,				_______,	\
+  _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,				_______,	\
+  _______,		_______,	_______,	_______,	_______, 				_______,				_______,	_______,	_______,				RESET),
+};

keyboards/atom47/keymaps/default/readme.md

@@ -0,0 +1,10 @@
+To be updated...
+
+
+// This layer is just a blank template to be copied for easy layer creation. please don not edit it.
+
+ [_LX] = KEYMAP_ANSI(
+   _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	\
+   _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,				_______,	\
+   _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,				_______,	\
+   _______,		_______,	_______,	_______,	    _______, 			_______,			               	_______,	_______,	_______,	RESET),

keyboards/atom47/readme.md

@@ -0,0 +1,28 @@
+# ATOM47
+
+![ATOM47](https://i.imgur.com/rjrFTKT.png)
+
+## Support
+Keyboard Maintainer: [Matthew Kerfoot(https://github.com/mkerfoot)  
+Hardware Supported: ATOM47  
+Hardware Availability: [GeekHack.com Group Buy](https://geekhack.org/index.php?topic=93447.msg2545221)  
+
+
+## Features
+QMK Firmware
+6 Underglow RGB leds
+In-switch leds
+Through-hole micro usb connector (less likely to break off!)
+South facing leds for the QMX/Zealencio users
+Multiple layouts
+Easily reachable reset button under the spacebar
+CapsLock indicator
+
+## Build
+To build the default keymap, simply run `make atom47:default`.
+
+For an alternative, heavily modified layout you would just need to run `make atom47:LEdiodes`.
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+
+![ATOM47](https://i.imgur.com/WebeUOF.png)

keyboards/atom47/rules.mk

@@ -0,0 +1,65 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = no   # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE = no 		# MIDI controls
+AUDIO_ENABLE = no
+UNICODE_ENABLE = no 		# Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID

keyboards/bfake/bfake.c

@@ -16,7 +16,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "bfake.h"
+#ifdef BACKLIGHT_ENABLE
+#include "backlight.h"
+#endif
+#ifdef RGBLIGHT_ENABLE
 #include "rgblight.h"
+#endif
 
 #include <avr/pgmspace.h>
 
@@ -24,6 +29,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "i2c.h"
 #include "quantum.h"
 
+#ifdef RGBLIGHT_ENABLE
 extern rgblight_config_t rgblight_config;
 
 void rgblight_set(void) {
@@ -38,8 +44,23 @@ void rgblight_set(void) {
     i2c_init();
     i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
 }
+#endif
 
 __attribute__ ((weak))
 void matrix_scan_user(void) {
-    rgblight_task();
+}
+
+void backlight_init_ports(void) {
+	DDRD |= (1<<0 | 1<<1 | 1<<4 | 1<<6);
+	PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6);
+}
+
+void backlight_set(uint8_t level) {
+	if (level == 0) {
+		// Turn out the lights
+		PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6);
+	} else {
+		// Turn on the lights
+		PORTD |= (1<<0 | 1<<1 | 1<<4 | 1<<6);
+	}
 }

keyboards/bfake/config.h

@@ -37,7 +37,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCING_DELAY 5
 
-
+#define NO_BACKLIGHT_CLOCK
+#define BACKLIGHT_LEVELS 1
 #define RGBLIGHT_ANIMATIONS
 
 #define NO_UART 1

keyboards/bfake/rules.mk

@@ -37,7 +37,7 @@ EXTRAKEY_ENABLE = yes
 CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = no
-RGBLIGHT_ENABLE = yes
+RGBLIGHT_ENABLE = no
 RGBLIGHT_CUSTOM_DRIVER = yes
 
 OPT_DEFS = -DDEBUG_LEVEL=0
@@ -47,4 +47,4 @@ CUSTOM_MATRIX = yes
 SRC = matrix.c i2c.c
 
 # programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
+PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex

keyboards/dz60/keymaps/Ansi_plus_fn_arrows/keymap.c

@@ -0,0 +1,61 @@
+#include "dz60.h"
+
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	KEYMAP(
+		F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC, 
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, 
+		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, 
+		KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_NO, 
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, MO(1), KC_RALT, KC_RALT, KC_LGUI, KC_RCTL),
+
+	KEYMAP(
+		KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, 
+		KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_TOGG, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_LEFT, KC_DOWN, KC_RIGHT),
+
+	KEYMAP(
+		KC_TRNS, M(1), M(2), M(3), M(4), M(5), M(6), M(7), M(8), M(9), M(10), M(11), M(12), KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+};
+
+enum function_id {
+    SHIFT_ESC,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0]  = ACTION_FUNCTION(SHIFT_ESC),
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  static uint8_t shift_esc_shift_mask;
+  switch (id) {
+    case SHIFT_ESC:
+      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
+      if (record->event.pressed) {
+        if (shift_esc_shift_mask) {
+          add_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          add_key(KC_ESC);
+          send_keyboard_report();
+        }
+      } else {
+        if (shift_esc_shift_mask) {
+          del_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          del_key(KC_ESC);
+          send_keyboard_report();
+        }
+      }
+      break;
+  }
+}

keyboards/dz60/keymaps/LEdiodes/config.h

@@ -0,0 +1,58 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x2260
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    KBDFans
+#define PRODUCT         DZ60
+#define DESCRIPTION     DZ60 Keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3, F4 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B6
+#define BACKLIGHT_LEVELS 5
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+#define RGB_DI_PIN E2
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 16
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+
+/* sets 'Auto Shift' timeouts */
+#define AUTO_SHIFT_TIMEOUT 150
+#define NO_AUTO_SHIFT_SPECIAL
+
+#endif

keyboards/dz60/keymaps/LEdiodes/keymap.c

@@ -0,0 +1,141 @@
+#include "xd60.h"
+#include "action_layer.h"
+
+#Define _L0 0
+#Define _L1 1
+#Define _L2 2
+#Define _L3 3
+#Define _L4 4
+
+#define _______ KC_TRNS
+
+/*
+ * template
+ * [_L1] = KEYMAP( 
+ *      _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,    \
+ *      _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,        _______,        \
+ *       _______,        _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,        _______,        \
+ *      _______,        _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,   \
+ *       _______,_______,_______,        _______,_______,_______,                _______,_______,_______,_______,_______,
+ * 
+ * 
+ *\
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap _L0: (Layer 0 - Base Layer) This is the default layer
+ * This layer has a key set to MO(_L1) which means when held down Layer 1 will become active, If Layer 1 does not have anything set for tat key is will revert to uing the key set at layer 0.
+ * LT(_L1, KC_1) means that when the "1" key is long touched then it will activate the layer _L1 key(F1) but if the key is just tapped it will activate the "1" key.
+ * KC_GESC = Escape when tapped, ` when pressed with Shift or GUI
+ * KC_LSPO = Left Shift when held, ( when tapped
+ * TD(LT(_L3,KC_SPACE)) = This is a test... hoping it will tap dance if double tapped it does enter if single tap it does space if long hold down it does _L3(Layer 3).
+ * LT(_L3,KC_SPACE) = if tapped it does space, is long touch it does _L3(Layer 3)
+ * BL_TOGG = Toggles the LEDs.
+ * ,-----------------------------------------------------------------------------------------.
+ * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |Bkspc| Del |
+ * |-----------------------------------------------------------------------------------------+
+ * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |    \   |
+ * |-----------------------------------------------------------------------------------------+
+ * | _L4    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
+ * |-----------------------------------------------------------------------------------------+
+ * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  | RSh |  U  | _L1 |
+ * |-----------------------------------------------------------------------------------------+
+ * | Ctrl |  Win  |  Alt  |  _L3[Space]  |LEdiodes|      Space       |Win | _L2|  L |  D |  R |
+ * `-----------------------------------------------------------------------------------------'
+ */
+[_L0] = KEYMAP(
+      KC_GESC,              LT(_L1, KC_1),LT(_L1, KC_2),LT(_L1, KC_3),LT(_L1, KC_4),LT(_L1, KC_5),LT(_L1, KC_6),LT(_L1, KC_7),LT(_L1, KC_8),LT(_L1, KC_9),LT(_L1, KC_0),LT(_L1, KC_MINS),LT(_L1, KC_EQL),KC_BSPC,  KC_DEL,    \
+      KC_TAB,              KC_Q,    KC_W,    KC_E,     KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC,  KC_RBRC,           KC_BSLS,   \
+      KC_CAPS,             KC_A,    KC_S,    KC_D,     KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT,  KC_NO,             KC_ENT,    \
+      KC_LSPO, KC_NO,   KC_Z,    KC_X,     KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH,  KC_RSPO, KC_UP,    M0(_L1), \
+      KC_LCTL,             KC_LGUI, KC_LALT, TD(LT(_L3,KC_SPACE)),BL_TOGG,TD(TD_SPC_ENT),     KC_RGUI, M0(_L2), KC_LEFT,  KC_DOWN,  KC_RIGHT),
+
+/* Keymap _L1: (Layer 1) This is function layer 1
+ * This layer is activated while the Fn key is being held down.
+ * ,-----------------------------------------------------------------------------------------.
+ * | Reset |  F1 |  F2 |  F3 |  F4 |  F5 |  F6 |  F7 |  F8 |  F9 | F10 | F11 | F12 | F13| F14|
+ * |-----------------------------------------------------------------------------------------+
+ * |        |  WhUp|  U  | WhDn |    |    |     |     |     | PrtScr |     |    |    |       |
+ * |-----------------------------------------------------------------------------------------+
+ * |         |  L   |   D  |  R  |     |     | Home |     |     |     |     |      |         |
+ * |-----------------------------------------------------------------------------------------+
+ * |           |      |     |     |     |     |  End | VolDn|VolUp|Mute |    |   | PgUp|     |
+ * |-----------------------------------------------------------------------------------------+
+ * |      |       |      |          |       |                |      |      | Home| PgDn| End |
+ * `-----------------------------------------------------------------------------------------'
+ */
+[_L1] = KEYMAP( 
+      RESET,   KC_F1,   KC_F2,   KC_F3,    KC_F4,   KC_F5,  KC_F6,    KC_F7,    KC_F8,    KC_F9,     KC_F10,   KC_F11,   KC_F12,  KC_F13,   KC_F14,              \
+      _______, KC_WH_U, KC_UP,   KC_WH_D,  _______, _______,_______,  _______,  _______,  _______,   KC_PSCR, _______,  _______,                      _______,   \
+      _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, KC_HOME, _______,  _______,  _______,   KC_HOME, _______,  _______,                      _______,   \
+      _______,          _______, _______,  KC_APP,  BL_STEP,_______,  KC_END,   KC_VOLD,  KC_VOLU,   KC_MUTE, _______,  _______,  _______, KC_PGUP,   _______,   \
+      _______, _______, _______,                                _______,_______,_______,                _______, _______,         KC_HOME, KC_PGDOWN, KC_END),
+
+/* Keymap _L2: (Layer 2) This is function layer 2
+ * This layer is activated while the Fn2 key is being held down.
+ * LCA(KC_TAB) = Hold Left Control and Alt and press kc_tab which cycles trough open apps.
+ * MEH(KC_TAB) = Hold Left Control, Shift and Alt and press kc_TAB to cycle backwards through apps.
+ * ,-----------------------------------------------------------------------------------------.
+ * |  |   |   |   |   |   |   |   |   |   |  |  |  | | LCA(KC_TAB)|
+ * |-----------------------------------------------------------------------------------------+
+ * |        |  |    |  |    |    |     |     |     |  |     |    |    |       |MEH(KC_TAB)
+ * |-----------------------------------------------------------------------------------------+
+ * |         |     |     |    |     |     | |     |     |     |     |      |         |
+ * |-----------------------------------------------------------------------------------------+
+ * |           |      |     |     |     |     |   | || |    |   | |     |
+ * |-----------------------------------------------------------------------------------------+
+ * |      |       |      |          |       |                |      |      | | |  |
+ * `-----------------------------------------------------------------------------------------'
+ */
+[_L2] = KEYMAP( 
+      _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,LCA(KC_TAB),    \
+      _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,        MEH(KC_TAB),        \
+      _______,        _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,        _______,        \
+      _______,        _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,KC_MS_BTN1,KC_MS_UP,KC_MS_BTN2,   \
+      _______,_______,_______,        _______,_______,_______,                _______,_______,KC_MS_LEFT,KC_MS_DOWN,KC_MS_RIGHT,
+
+};
+
+// Custom Actions
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_LAYER_MOMENTARY(1),  // to Fn overlay
+};
+
+// Macros
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+
+  // MACRODOWN only works in this function
+  switch(id) {
+    case 0:
+      if (record->event.pressed) { register_code(KC_RSFT); }
+      else { unregister_code(KC_RSFT); }
+      break;
+  }
+
+  return MACRO_NONE;
+};
+
+// Loop
+void matrix_scan_user(void) {
+  // Empty
+};
+
+//Tap Dance Declarations
+enum {
+  TD_SPC_ENT = 0,
+  TD_KC_LSFT_CAPS = 0,
+  TD_KC_RSFT_CAPS = 0
+};
+
+//Tap Dance Definitions
+qk_tap_dance_action_t tap_dance_actions[] = {
+
+  //Tap once for space, tap twice for enter
+  [TD_SPC_ENT]  = ACTION_TAP_DANCE_DOUBLE(KC_SPC, KC_ENT),
+  //Tap once for Left Shift, twice for Caps Lock
+  [TD_KC_LSFT_CAPS]  = ACTION_TAP_DANCE_DOUBLE(KC_LSFT, KC_CAPS),
+  //Tap once for Right Shift, twice for Caps Lock
+  [TD_KC_RSFT_CAPS]  = ACTION_TAP_DANCE_DOUBLE(KC_RSFT, KC_CAPS)
+   
+// Other declarations would go here, separated by commas, if you have them
+    
+};

keyboards/dz60/keymaps/LEdiodes/readme.md

@@ -0,0 +1,9 @@
+# LEdiodes Keymap for XD60 60% PCB
+
+![LEdiodes Layer 0 Keymap for XD60](https://i.imgur.com/pDneawX.jpg)
+
+## Additional Notes
+Layer 0(default) Keymap for LEdiodes XD60.
+
+## Build
+To build the default keymap, simply run `make xd60:LEdiodes`.

keyboards/dz60/keymaps/LEdiodes/rules.mk

@@ -0,0 +1,57 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = yes
+AUTO_SHIFT_ENABLE = yes # If the time depressed is greater than or equal to the AUTO_SHIFT_TIMEOUT, then a shifted version of the key is emitted. If the time is less than the AUTO_SHIFT_TIMEOUT time, then the normal state is emitted

keyboards/ergodox_ez/keymaps/saha/keymap.c

@@ -0,0 +1,255 @@
+#include QMK_KEYBOARD_H
+
+#include "ergodox_ez.h"
+#include "debug.h"
+#include "action_layer.h"
+
+#define BASE   0  // Base layer - QWERTY
+#define SPEC   1  // Special keys favoring programming in c-like languages
+#define NUM    2  // Numeric layer with number row functional keys
+
+#define ___     KC_TRNS
+#define BSLASH  LSFT(KC_SLSH)
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    
+    [BASE] = LAYOUT_ergodox(
+
+    // Left side
+        /*=========================================================================================================*/
+        /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+        /**/  KC_VOLU, /**/   KC_1,   /**/   KC_2,   /**/   KC_3,   /**/   KC_4,   /**/   KC_5,   /**/  KC_F11,  /**/
+        /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+        /*=========================================================================================================*/
+        /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+        /**/  KC_VOLD, /**/   KC_Q,   /**/    KC_W,  /**/   KC_E,   /**/   KC_R,   /**/   KC_T,   /**/  KC_ESC,  /**/
+        /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+        /*==========================================================================================*/           /**/
+        /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+        /**/  KC_MPLY, /**/   KC_A,   /**/   KC_S,   /**/   KC_D,   /**/   KC_F,   /**/   KC_G,   /*===============*/
+        /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+        /*==========================================================================================*/           /**/
+        /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+        /**/  KC_MUTE, /**/   KC_Z,   /**/    KC_X,  /**/   KC_C,   /**/   KC_V,   /**/   KC_B,   /**/  KC_BSPC, /**/
+        /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+        /*=========================================================================================================*/
+            /**/       /**/           /**/           /**/           /**/           /**/
+            /**/  ___, /**/   ___,    /**/    ___,   /**/  KC_RALT, /**/ KC_LCTRL, /**/
+            /**/       /**/           /**/           /**/           /**/           /**/
+            /*=======================================================================*/
+
+
+                                                                                               /*==============================*/
+                                                                                               /**/           /**/           /**/
+                                                                                               /**/    ___,   /**/  KC_DEL,  /**/
+                                                                                               /**/           /**/           /**/
+                                                                                /*=============================================*/
+                                                                                /**/           /**/           /**/           /**/
+                                                                                /**/           /**/           /**/  KC_LALT, /**/
+                                                                                /**/           /**/           /**/           /**/
+                                                                                /**/           /**/           /*===============*/
+                                                                                /**/           /**/           /**/           /**/
+                                                                                /**/ KC_SPACE, /**/  KC_LGUI, /**/ KC_LCTRL, /**/
+                                                                                /**/           /**/           /**/           /**/
+                                                                                /*=============================================*/
+
+    // Right side
+        //
+                    /*=========================================================================================================*/
+                    /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+                    /**/  KC_F12,  /**/   KC_1,   /**/   KC_2,   /**/   KC_3,   /**/   KC_4,   /**/   KC_5,   /**/    ___,   /**/
+                    /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+                    /*=========================================================================================================*/
+                    /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+                    /**/    ___,   /**/   KC_Y,   /**/   KC_U,   /**/   KC_I,   /**/   KC_O,   /**/   KC_P,   /**/    ___,   /**/
+                    /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+                    /**/           /*==========================================================================================*/
+                    /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+                    /*===============*/   KC_H,   /**/   KC_J,   /**/   KC_K,   /**/   KC_L,   /**/  KC_SCLN, /**/    ___,   /**/
+                    /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+                    /**/           /*==========================================================================================*/
+                    /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+                    /**/  KC_ENT,  /**/   KC_N,   /**/   KC_M,   /**/  KC_COMM, /**/  KC_DOT,  /**/  KC_SLSH, /**/    ___,   /**/
+                    /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+                    /*=========================================================================================================*/
+                                                  /**/           /**/           /**/           /**/           /**/       /**/
+                                                  /**/  MO(NUM), /**/   ___,    /**/    ___,   /**/    ___,   /**/  ___, /**/
+                                                  /**/           /**/           /**/           /**/           /**/       /**/
+                                                  /*=======================================================================*/
+
+        /*==============================*/
+        /**/           /**/           /**/
+        /**/    ___,   /**/    ___,   /**/
+        /**/           /**/           /**/
+        /*=============================================*/
+        /**/           /**/           /**/           /**/
+        /**/    ___,   /**/           /**/           /**/
+        /**/           /**/           /**/           /**/
+        /*===============*/           /**/           /**/
+        /**/           /**/           /**/           /**/
+        /**/    ___,   /**/  KC_RSFT, /**/ MO(SPEC)  /**/
+        /**/           /**/           /**/           /**/
+        /*=============================================*/
+    ),
+
+    
+    [SPEC] = LAYOUT_ergodox(
+
+    // Left side
+        /*=========================================================================================================*/
+        /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+        /**/    ___,   /**/  KC_EXLM, /**/   KC_AT,  /**/  KC_HASH, /**/  KC_DLR,  /**/  KC_PERC, /**/    ___,   /**/
+        /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+        /*=========================================================================================================*/
+        /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+        /**/    ___,   /**/  KC_GRV,  /**/  KC_QUOT, /**/  KC_LCBR, /**/  KC_RCBR, /**/  KC_PLUS, /**/  KC_ESC,  /**/
+        /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+        /*==========================================================================================*/           /**/
+        /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+        /**/    ___,   /**/  KC_TAB,  /**/  KC_ASTR, /**/  KC_LPRN, /**/  KC_RPRN, /**/ KC_EQUAL, /*===============*/
+        /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+        /*==========================================================================================*/           /**/
+        /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+        /**/    ___,   /**/  KC_HASH, /**/  KC_PERC, /**/  KC_LBRC, /**/  KC_RBRC, /**/ KC_MINUS, /**/  KC_BSPC, /**/
+        /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+        /*=========================================================================================================*/
+            /**/       /**/           /**/           /**/           /**/           /**/
+            /**/  ___, /**/   ___,    /**/    ___,   /**/  KC_LALT, /**/ KC_LCTRL, /**/
+            /**/       /**/           /**/           /**/           /**/           /**/
+            /*=======================================================================*/
+
+
+                                                                                               /*==============================*/
+                                                                                               /**/           /**/           /**/
+                                                                                               /**/    ___,   /**/  KC_DEL,  /**/
+                                                                                               /**/           /**/           /**/
+                                                                                /*=============================================*/
+                                                                                /**/           /**/           /**/           /**/
+                                                                                /**/           /**/           /**/  KC_LALT, /**/
+                                                                                /**/           /**/           /**/           /**/
+                                                                                /**/           /**/           /*===============*/
+                                                                                /**/           /**/           /**/           /**/
+                                                                                /**/ KC_SPACE, /**/  KC_LGUI, /**/ KC_LCTRL, /**/
+                                                                                /**/           /**/           /**/           /**/
+                                                                                /*=============================================*/
+
+    // Right side
+        //
+                    /*=========================================================================================================*/
+                    /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+                    /**/    ___,   /**/  KC_CIRC, /**/  KC_AMPR, /**/  KC_ASTR, /**/  KC_LPRN, /**/  KC_RPRN, /**/    ___,   /**/
+                    /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+                    /*=========================================================================================================*/
+                    /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+                    /**/    ___,   /**/  KC_AMPR, /**/  KC_HOME, /**/   KC_UP,  /**/  KC_END,  /**/  KC_CIRC, /**/   KC_F7,  /**/
+                    /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+                    /**/           /*==========================================================================================*/
+                    /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+                    /*===============*/  KC_EXLM, /**/  KC_LEFT, /**/  KC_DOWN, /**/ KC_RIGHT, /**/  KC_COLN, /**/   KC_F8,  /**/
+                    /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+                    /**/           /*==========================================================================================*/
+                    /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+                    /**/  KC_ENT,  /**/  KC_PIPE, /**/  KC_UNDS, /**/   KC_LT,  /**/   KC_GT,  /**/  KC_BSLS, /**/   KC_F9,  /**/
+                    /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+                    /*=========================================================================================================*/
+                                                  /**/           /**/           /**/           /**/           /**/       /**/
+                                                  /**/    ___,   /**/   ___,    /**/    ___,   /**/    ___,   /**/KC_F10,/**/
+                                                  /**/           /**/           /**/           /**/           /**/       /**/
+                                                  /*=======================================================================*/
+
+        /*==============================*/
+        /**/           /**/           /**/
+        /**/    ___,   /**/    ___,   /**/
+        /**/           /**/           /**/
+        /*=============================================*/
+        /**/           /**/           /**/           /**/
+        /**/    ___,   /**/           /**/           /**/
+        /**/           /**/           /**/           /**/
+        /*===============*/           /**/           /**/
+        /**/           /**/           /**/           /**/
+        /**/    ___,   /**/  KC_RSFT, /**/    ___    /**/
+        /**/           /**/           /**/           /**/
+        /*=============================================*/
+    ),
+
+    [NUM] = LAYOUT_ergodox(
+
+    // Left side
+        /*=========================================================================================================*/
+        /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+        /**/    ___,   /**/   KC_F1,  /**/   KC_F2,  /**/   KC_F3,  /**/   KC_F4,  /**/   KC_F5,  /**/  KC_F11,  /**/
+        /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+        /*=========================================================================================================*/
+        /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+        /**/    ___,   /**/  KC_EXLM, /**/   KC_AT,  /**/  KC_HASH, /**/  KC_DLR,  /**/  KC_PERC, /**/  KC_ESC,  /**/
+        /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+        /*==========================================================================================*/           /**/
+        /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+        /**/    ___,   /**/   KC_1,   /**/   KC_2,   /**/   KC_3,   /**/   KC_4,   /**/   KC_5,   /*===============*/
+        /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+        /*==========================================================================================*/           /**/
+        /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+        /**/    ___,   /**/  KC_HASH, /**/  KC_PERC, /**/  KC_LBRC, /**/  KC_RBRC, /**/ KC_MINUS, /**/  KC_BSPC, /**/
+        /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+        /*=========================================================================================================*/
+            /**/       /**/           /**/           /**/           /**/           /**/
+            /**/  ___, /**/   ___,    /**/    ___,   /**/  KC_LALT, /**/ KC_LCTRL, /**/
+            /**/       /**/           /**/           /**/           /**/           /**/
+            /*=======================================================================*/
+
+
+                                                                                               /*==============================*/
+                                                                                               /**/           /**/           /**/
+                                                                                               /**/    ___,   /**/  KC_DEL,  /**/
+                                                                                               /**/           /**/           /**/
+                                                                                /*=============================================*/
+                                                                                /**/           /**/           /**/           /**/
+                                                                                /**/           /**/           /**/  KC_LALT, /**/
+                                                                                /**/           /**/           /**/           /**/
+                                                                                /**/           /**/           /*===============*/
+                                                                                /**/           /**/           /**/           /**/
+                                                                                /**/ KC_SPACE, /**/  KC_LGUI, /**/ KC_LCTRL, /**/
+                                                                                /**/           /**/           /**/           /**/
+                                                                                /*=============================================*/
+
+    // Right side
+        //
+                    /*=========================================================================================================*/
+                    /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+                    /**/  KC_F12,  /**/   KC_F6,  /**/   KC_F7,  /**/   KC_F8,  /**/   KC_F9,  /**/  KC_F10,  /**/    ___,   /**/
+                    /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+                    /*=========================================================================================================*/
+                    /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+                    /**/    ___,   /**/  KC_CIRC, /**/  KC_AMPR, /**/  KC_ASTR, /**/  KC_LPRN, /**/  KC_RPRN, /**/    ___,   /**/
+                    /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+                    /**/           /*==========================================================================================*/
+                    /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+                    /*===============*/   KC_6,   /**/   KC_7,   /**/   KC_8,   /**/   KC_9,   /**/   KC_0,   /**/    ___,   /**/
+                    /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+                    /**/           /*==========================================================================================*/
+                    /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+                    /**/  KC_ENT,  /**/  KC_PIPE, /**/  KC_UNDS, /**/  KC_COMM, /**/  KC_DOT,  /**/  KC_BSLS, /**/    ___,   /**/
+                    /**/           /**/           /**/           /**/           /**/           /**/           /**/           /**/
+                    /*=========================================================================================================*/
+                                                  /**/           /**/           /**/           /**/           /**/       /**/
+                                                  /**/    ___,   /**/   ___,    /**/    ___,   /**/    ___,   /**/  ___, /**/
+                                                  /**/           /**/           /**/           /**/           /**/       /**/
+                                                  /*=======================================================================*/
+
+        /*==============================*/
+        /**/           /**/           /**/
+        /**/    ___,   /**/    ___,   /**/
+        /**/           /**/           /**/
+        /*=============================================*/
+        /**/           /**/           /**/           /**/
+        /**/    ___,   /**/           /**/           /**/
+        /**/           /**/           /**/           /**/
+        /*===============*/           /**/           /**/
+        /**/           /**/           /**/           /**/
+        /**/    ___,   /**/  KC_RSFT, /**/    ___    /**/
+        /**/           /**/           /**/           /**/
+        /*=============================================*/
+    ),
+
+};

keyboards/ergodox_infinity/info.json

@@ -0,0 +1,14 @@
+{
+    "keyboard_name": "Infinity Ergodox",
+    "manufacturer": "Input Club",
+    "identifier": "FEED:6464:0001",
+    "processor": "MK20DX256VLH7",
+    "bootloader": "KIIBOHD_BOOTLOADER",
+    "width": 19.5,
+    "height": 9.375,
+    "layouts": {
+        "KEYMAP": {
+            "layout": [{"label":"#", "x":3.5, "y":0}, {"label":"*", "x":15, "y":0}, {"label":"@", "x":2.5, "y":0.125}, {"label":"$", "x":4.5, "y":0.125}, {"label":"&", "x":14, "y":0.125}, {"label":"(", "x":16, "y":0.125}, {"label":"%", "x":5.5, "y":0.25}, {"x":6.5, "y":0.25}, {"x":12, "y":0.25}, {"label":"^", "x":13, "y":0.25}, {"x":0, "y":0.375, "w":1.5}, {"label":"!", "x":1.5, "y":0.375}, {"label":")", "x":17, "y":0.375}, {"x":18, "y":0.375, "w":1.5}, {"label":"E", "x":3.5, "y":1}, {"label":"I", "x":15, "y":1}, {"label":"W", "x":2.5, "y":1.125}, {"label":"R", "x":4.5, "y":1.125}, {"label":"U", "x":14, "y":1.125}, {"label":"O", "x":16, "y":1.125}, {"label":"T", "x":5.5, "y":1.25}, {"x":6.5, "y":1.25, "h":1.5}, {"x":12, "y":1.25, "h":1.5}, {"label":"Y", "x":13, "y":1.25}, {"x":0, "y":1.375, "w":1.5}, {"label":"Q", "x":1.5, "y":1.375}, {"label":"P", "x":17, "y":1.375}, {"x":18, "y":1.375, "w":1.5}, {"label":"D", "x":3.5, "y":2}, {"label":"K", "x":15, "y":2}, {"label":"S", "x":2.5, "y":2.125}, {"label":"F", "x":4.5, "y":2.125}, {"label":"J", "x":14, "y":2.125}, {"label":"L", "x":16, "y":2.125}, {"label":"G", "x":5.5, "y":2.25}, {"label":"H", "x":13, "y":2.25}, {"x":0, "y":2.375, "w":1.5}, {"label":"A", "x":1.5, "y":2.375}, {"label":":", "x":17, "y":2.375}, {"x":18, "y":2.375, "w":1.5}, {"x":6.5, "y":2.75, "h":1.5}, {"x":12, "y":2.75, "h":1.5}, {"label":"C", "x":3.5, "y":3}, {"label":"<", "x":15, "y":3}, {"label":"X", "x":2.5, "y":3.125}, {"label":"V", "x":4.5, "y":3.125}, {"label":"M", "x":14, "y":3.125}, {"label":">", "x":16, "y":3.125}, {"label":"B", "x":5.5, "y":3.25}, {"label":"N", "x":13, "y":3.25}, {"x":0, "y":3.375, "w":1.5}, {"label":"Z", "x":1.5, "y":3.375}, {"label":"?", "x":17, "y":3.375}, {"x":18, "y":3.375, "w":1.5}, {"x":3.5, "y":4}, {"x":15, "y":4}, {"x":2.5, "y":4.125}, {"x":4.5, "y":4.125}, {"x":14, "y":4.125}, {"x":16, "y":4.125}, {"x":0.5, "y":4.375}, {"x":1.5, "y":4.375}, {"x":17, "y":4.375}, {"x":18, "y":4.375}, {"x":1, "y":4.375}, {"x":2, "y":4.375}, {"x":0, "y":5.375, "h":2}, {"x":1, "y":5.375, "h":2}, {"x":2, "y":5.375}, {"x":2, "y":6.375}, {"x":-3.0, "y":6.375}, {"x":-2, "y":6.375}, {"x":-3.0, "y":7.375}, {"x":-2, "y":7.375, "h":2}, {"x":-1.0, "y":7.375, "h":2}, {"x":-3.0, "y":8.375}]
+        }
+    }
+}

keyboards/ergodox_infinity/keymaps/halfkeyboard/keymap.c

@@ -8,7 +8,10 @@
 #define DVORAK 2 // dvorak layer 
 #define HALFDVORAK 3 // mirrored dvorak layer 
 #define SYMB 5 // symbols
-#define MDIA 6 // media keys
+#define HALFSYMB 6 // media keys
+#define PLVR 7 // steno plover layout
+#define SHORTCUTS 8 //layer with shortcut keys
+
 
 enum custom_keycodes {
   PLACEHOLDER = SAFE_RANGE, // can always be here
@@ -21,258 +24,346 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 /* Keymap 0: qwerty
  *
  * ,--------------------------------------------------.           ,--------------------------------------------------.
- * |  ESC   |   1  |   2  |   3  |   4  |   5  | LEFT |           | RIGHT|   6  |   7  |   8  |   9  |   0  |  BSPC  |
+ * |  ESC   |   1  |   2  |   3  |   4  |   5  | `    |           | \    |   6  |   7  |   8  |   9  |   0  |  BSPC  |
  * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * | TAB    |   Q  |   W  |   E  |   R  |   T  |  L1  |           |  L1  |   Y  |   U  |   I  |   O  |   P  |   \    |
+ * | TAB    |   Q  |   W  |   E  |   R  |   T  |  [   |           | ]    |   Y  |   U  |   I  |   O  |   P  |   '    |
  * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
  * | BkSp   |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |   ;  |ENTER   |
- * |--------+------+------+------+------+------| Hyper|           | Meh  |------+------+------+------+------+--------|
+ * |--------+------+------+------+------+------| -    |           | =    |------+------+------+------+------+--------|
  * | LShift |   Z  |   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ,  |   .  |   /  | RShift |
  * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |LCTRL|ALT  |CTL-TAB|CTLShTab| LGui|                                       |  RGui| UP   | DOWN |  ALT | RCTRL  |
+ *   |LCTRL|ALT  |CTLShTab|CTL-TAB| LGui|                                       |  RGui| UP   | DOWN |  ALT | RCTRL  |
  *   `----------------------------------'                                       `----------------------------------'
  *                                        ,-------------.       ,-------------.
- *                                        | Alt  | LGui |       | RGui |Alt   |
+ *                                        |Symbol|Dvorak|       |Plover|HalfSymb|
  *                                 ,------|------|------|       |------+--------+------.
  *                                 |      |      | Home |       | PgUp |        |      |
- *                                 | Space|Backsp|------|       |------|  Tab   |Enter |
- *                                 |mirror|ace   | End  |       | PgDn |        |mirror|
+ *                                 | Space|DELETE|------|       |------|  Tab   |Enter |
+ *                                 |mirror|      | End  |       | PgDn |        |mirror|
  *                                 `--------------------'       `----------------------'
  */
 // If it accepts an argument (i.e, is a function), it doesn't need KC_.
 // Otherwise, it needs KC_*
 [QWERTY] = LAYOUT_ergodox(  // layer 0 : default
         // left hand
-        KC_ESC,         KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   KC_LEFT,
-        KC_TAB,         KC_Q,         KC_W,   KC_E,   KC_R,   KC_T,   TG(SYMB),
+        KC_ESC,         KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   KC_GRAVE,
+        KC_TAB,         KC_Q,         KC_W,   KC_E,   KC_R,   KC_T,   KC_LBRC,
         KC_BSPC,        KC_A,         KC_S,   KC_D,   KC_F,   KC_G,
-        KC_LSFT,        KC_Z,  		  KC_X,   KC_C,   KC_V,   KC_B,   BL_ON,
-        KC_LCTRL, 		KC_LALT,	  LCTL(KC_TAB), LCTL(LSFT(KC_TAB)),  KC_LGUI,
-                                              KC_LALT,  TG(DVORAK),
+        KC_LSFT,        KC_Z,  		  KC_X,   KC_C,   KC_V,   KC_B,   KC_MINUS,
+        KC_LCTRL, 		KC_LALT,	  LCTL(LSFT(KC_TAB)),LCTL(KC_TAB),  MO(SHORTCUTS),
+                                              TG(SYMB),  TG(DVORAK),
                                                               KC_HOME,
-                                         LT(HALFQWERTY, KC_SPACE),KC_BSPC,KC_END,
+                                         LT(HALFQWERTY, KC_SPACE),KC_DEL,KC_END,
         // right hand
-             KC_RGHT,     KC_6,   KC_7,  KC_8,   KC_9,   KC_0,             KC_BSPC,
-             TG(SYMB),    KC_Y,   KC_U,  KC_I,   KC_O,   KC_P,             KC_BSLS,
+             KC_BSLS,     KC_6,   KC_7,  KC_8,   KC_9,   KC_0,             KC_BSPC,
+             KC_RBRC,    KC_Y,   KC_U,  KC_I,   KC_O,   KC_P,             KC_SLASH,
                           KC_H,   KC_J,  KC_K,   KC_L,   KC_SCLN,		   KC_ENT,
-             MEH_T(KC_NO),KC_N,   KC_M,  KC_COMM,KC_DOT, KC_SLASH,   	   KC_RSFT,
+             KC_EQL,KC_N,   KC_M,  KC_COMM,KC_DOT, KC_SLASH,   	   KC_RSFT,
                                   KC_RGUI, KC_UP,KC_DOWN,KC_RALT,           KC_RCTRL,
-             TG(DVORAK),        KC_RALT,
+             TG(PLVR),        TG(HALFSYMB),
              KC_PGUP,
              KC_PGDN,KC_TAB, LT(HALFQWERTY, KC_ENT)
     ),
 /* Keymap 1: mirrored qwerty
  *
  * ,--------------------------------------------------.           ,--------------------------------------------------.
- * |  BSPC  |   0  |   9  |   8  |   7  |   6  | LEFT |           | RIGHT|   5  |   4  |   3  |   2  |   1  |  ESC  |
+ * |  BSPC  |   0  |   9  |   8  |   7  |   6  | \    |           |   `  |   5  |   4  |   3  |   2  |   1  |  ESC  |
  * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * |  \     |   P  |   O  |   I  |   U  |   Y  |  L1  |           |  L1  |   T  |   R  |   E  |   W  |   Q  |   TAB  |
+ * |  '     |   P  |   O  |   I  |   U  |   Y  |  ]   |           |  [   |   T  |   R  |   E  |   W  |   Q  |   TAB  |
  * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
  * | ENTER  |   ;  |   L  |   K  |   J  |   H  |------|           |------|   G  |   F  |   D  |   S  |   A  | BSPC   |
- * |--------+------+------+------+------+------| Hyper|           | Meh  |------+------+------+------+------+--------|
+ * |--------+------+------+------+------+------| -    |           | =    |------+------+------+------+------+--------|
  * | LShift |   /  |   .  |   ,  |   M  |   N  |      |           |      |   B  |   V  |   C  |   X  |   Z  | RShift |
  * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |LCTRL|ALT  |CTL-TAB|CTLShTab| LGui|                                       |  RGui| UP   | DOWN |  ALT | RCTRL  |
+ *   |LCTRL|ALT  |CTLShTab|CTL-TAB| LGui|                                       |  RGui| UP   | DOWN |  ALT | RCTRL  |
  *   `----------------------------------'                                       `----------------------------------'
  *                                        ,-------------.       ,-------------.
- *                                        | Alt  | LGui |       | RGui |Alt   |
+ *                                        |      |      |       |      |      |
  *                                 ,------|------|------|       |------+--------+------.
  *                                 |      |      | Home |       | PgUp |        |      |
- *                                 | Space|Backsp|------|       |------|  Tab   |Enter |
- *                                 |mirror|ace   | End  |       | PgDn |        |mirror|
+ *                                 | Space|DELETE|------|       |------|  Tab   |Enter |
+ *                                 |mirror|      | End  |       | PgDn |        |mirror|
  *                                 `--------------------'       `----------------------'
  */
 // If it accepts an argument (i.e, is a function), it doesn't need KC_.
 // Otherwise, it needs KC_*
 [HALFQWERTY] = LAYOUT_ergodox(  // layer 0 : default
         // left hand
-        KC_BSPC,        KC_0,         KC_9,   KC_8,   KC_7,   KC_6,   KC_LEFT,
-        KC_TAB,         KC_P,         KC_O,   KC_I,   KC_U,   KC_Y,   TG(SYMB),
-        KC_BSPC,        KC_SCLN,      KC_L,   KC_K,   KC_J,   KC_H,
-        KC_LSFT,        KC_SLASH,  	  KC_DOT, KC_COMM,KC_M,   KC_N,   KC_TRANSPARENT,
-        KC_LCTRL, 		KC_LALT,	  LCTL(KC_TAB), LCTL(LSFT(KC_TAB)),  KC_LGUI,
-                                              KC_LALT,  KC_TRANSPARENT,
+        KC_BSPC,        KC_0,         KC_9,   KC_8,   KC_7,   KC_6,   KC_BSLS,
+        KC_BSLS,         KC_P,         KC_O,   KC_I,   KC_U,   KC_Y,   KC_RBRC,
+        KC_ENT,        KC_SCLN,      KC_L,   KC_K,   KC_J,   KC_H,
+        KC_LSFT,        KC_SLASH,  	  KC_DOT, KC_COMM,KC_M,   KC_N,   KC_EQL,
+        KC_LCTRL, 		KC_LALT,	   LCTL(LSFT(KC_TAB)),LCTL(KC_TAB),  KC_TRNS,
+                                              KC_TRNS,  KC_TRANSPARENT,
                                                               KC_HOME,
-                                         KC_TRANSPARENT,KC_BSPC,KC_END,
+                                         KC_TRANSPARENT,KC_DEL,KC_END,
         // right hand
-             KC_RGHT,     KC_5,   KC_4,  KC_3,   KC_2,   KC_1,             KC_BSPC,
-             TG(SYMB),    KC_T,   KC_R,  KC_E,   KC_W,   KC_Q,             KC_BSLS,
+             KC_GRAVE,     KC_5,   KC_4,  KC_3,   KC_2,   KC_1,             KC_BSPC,
+             KC_LBRC,    KC_T,   KC_R,  KC_E,   KC_W,   KC_Q,             KC_BSLS,
                           KC_G,   KC_F,  KC_D,   KC_S,   KC_A,  		   KC_ENT,
-             MEH_T(KC_NO),KC_B,   KC_V,  KC_C,   KC_X,   KC_Z,		   	   KC_RSFT,
+             KC_MINUS,KC_B,   KC_V,  KC_C,   KC_X,   KC_Z,		   	   KC_RSFT,
                                   KC_RGUI, KC_UP,KC_DOWN,KC_RALT,           KC_RCTRL,
-             KC_TRANSPARENT,        KC_RALT,
+             KC_TRANSPARENT,        KC_TRNS,
              KC_PGUP,
              KC_PGDN,KC_TAB, KC_TRANSPARENT
     ),
 /* Keymap 3: dvorak
  *
  * ,--------------------------------------------------.           ,--------------------------------------------------.
- * |  ESC   |   1  |   2  |   3  |   4  |   5  | LEFT |           | RIGHT|   6  |   7  |   8  |   9  |   0  |  BSPC  |
+ * |  ESC   |   1  |   2  |   3  |   4  |   5  | `    |           | \    |   6  |   7  |   8  |   9  |   0  |  BSPC  |
  * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * | TAB    |   '  |   ,  |   .  |   P  |   Y  |  L1  |           |  L1  |   F  |   G  |   C  |   R  |   L  |   /    |
+ * | TAB    |   '  |   ,  |   .  |   P  |   Y  |  [   |           |  ]   |   F  |   G  |   C  |   R  |   L  |   /    |
  * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * | BkSp   |   A  |   O  |   E  |   U  |   I  |------|           |------|   D  |   H  |   T  |   S  |  -   |ENTER   |
- * |--------+------+------+------+------+------| Hyper|           | Meh  |------+------+------+------+------+--------|
+ * | BkSp   |   A  |   O  |   E  |   U  |   I  |------|           |------|   D  |   H  |   T  |   N  |   S  |ENTER   |
+ * |--------+------+------+------+------+------| -    |           | =    |------+------+------+------+------+--------|
  * | LShift |   ;  |   Q  |   J  |   K  |   X  |      |           |      |   B  |   M  |   W  |   V  |  Z   | RShift |
  * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |LCTRL|ALT  |CTL-TAB|CTLShTab| LGui|                                       |  RGui| UP   | DOWN |  ALT | RCTRL  |
+ *   |LCTRL|ALT  |CTLShTab|CTL-TAB| LGui|                                       |  RGui| UP   | DOWN |  ALT | RCTRL  |
  *   `----------------------------------'                                       `----------------------------------'
  *                                        ,-------------.       ,-------------.
- *                                        | Alt  | LGui |       | RGui |Alt   |
+ *                                        | Alt  |      |       |      |Alt   |
  *                                 ,------|------|------|       |------+--------+------.
  *                                 |      |      | Home |       | PgUp |        |      |
- *                                 | Space|Backsp|------|       |------|  Tab   |Enter |
- *                                 |mirror|ace   | End  |       | PgDn |        |mirror|
+ *                                 | Space|DELETE|------|       |------|  Tab   |Enter |
+ *                                 |mirror|      | End  |       | PgDn |        |mirror|
  *                                 `--------------------'       `----------------------'
  */
 // If it accepts an argument (i.e, is a function), it doesn't need KC_.
 // Otherwise, it needs KC_*
 [DVORAK] = LAYOUT_ergodox(  // layer 0 : default
         // left hand
-        KC_ESC,         KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   KC_LEFT,
-        KC_TAB,         KC_QUOTE,	  KC_COMM,KC_DOT, KC_P,   KC_Y,   TG(SYMB),
+        KC_ESC,         KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   KC_GRAVE,
+        KC_TAB,         KC_QUOTE,	  KC_COMM,KC_DOT, KC_P,   KC_Y,   KC_LBRC,
         KC_BSPC,        KC_A,         KC_O,   KC_E,   KC_U,   KC_I,
-        KC_LSFT,        KC_SCLN,	  KC_Q,   KC_J,   KC_K,   KC_X,   ALL_T(KC_NO),
-        KC_LCTRL, 		KC_LALT,	  LCTL(KC_TAB), LCTL(LSFT(KC_TAB)),  KC_LGUI,
-                                              KC_LALT,  KC_TRANSPARENT,
+        KC_LSFT,        KC_SCLN,	  KC_Q,   KC_J,   KC_K,   KC_X,   KC_MINUS,
+        KC_LCTRL, 		KC_LALT,	  LCTL(LSFT(KC_TAB)),LCTL(KC_TAB),  KC_TRNS,
+                                              TG(SYMB),  KC_TRANSPARENT,
                                                               KC_HOME,
-                                         LT(HALFDVORAK, KC_SPACE),KC_BSPC,KC_END,
+                              LT(HALFDVORAK, KC_SPACE),KC_DEL,KC_END,
         // right hand
-             KC_RGHT,     KC_6,   KC_7,  KC_8,   KC_9,   KC_0,             KC_BSPC,
-             TG(SYMB),    KC_F,   KC_G,  KC_C,   KC_R,   KC_L,             KC_BSLS,
-                          KC_D,   KC_H,  KC_T,   KC_S,   KC_MINUS,		   KC_ENT,
-             MEH_T(KC_NO),KC_B,   KC_M,  KC_W,	 KC_V,	 KC_Z,		   	   KC_RSFT,
+             KC_BSLS,     KC_6,   KC_7,  KC_8,   KC_9,   KC_0,             KC_BSPC,
+             KC_RBRC,    KC_F,   KC_G,  KC_C,   KC_R,   KC_L,             KC_SLASH,
+                          KC_D,   KC_H,  KC_T,   KC_N,   KC_S,		   KC_ENT,
+             KC_EQL,KC_B,   KC_M,  KC_W,	 KC_V,	 KC_Z,		   	   KC_RSFT,
                                   KC_RGUI, KC_UP,KC_DOWN,KC_RALT,           KC_RCTRL,
-             KC_TRANSPARENT,        KC_RALT,
+             KC_TRANSPARENT,        TG(HALFSYMB),
              KC_PGUP,
              KC_PGDN,KC_TAB, LT(HALFDVORAK, KC_ENT)
     ),
 /* Keymap 3: mirrored dvorak
  *
  * ,--------------------------------------------------.           ,--------------------------------------------------.
- * |  BSPC  |   0  |   9  |   8  |   7  |   6  | LEFT |           | RIGHT|   5  |   4  |   3  |   2  |   1  |  ESC  |
+ * |  BSPC  |   0  |   9  |   8  |   7  |   6  | \    |           | `    |   5  |   4  |   3  |   2  |   1  |  ESC  |
  * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * | TAB    |   L  |   R  |   C  |   G  |   F  |  L1  |           |  L1  |   Y  |   P  |   .  |   ,  |   '  |   /    |
+ * |   	/   |   L  |   R  |   C  |   G  |   F  |  L1  |           |  L1  |   Y  |   P  |   .  |   ,  |   '  |   TAB  |
  * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * | BkSp   |   -  |   S  |   T  |   H  |   D  |------|           |------|   I  |   U  |   E  |   O  |   A  |ENTER   |
- * |--------+------+------+------+------+------| Hyper|           | Meh  |------+------+------+------+------+--------|
+ * | ENTER  |   S  |   N  |   T  |   H  |   D  |------|           |------|   I  |   U  |   E  |   O  |   A  |BSPC    |
+ * |--------+------+------+------+------+------| =    |           | -    |------+------+------+------+------+--------|
  * | LShift |   Z  |   V  |   W  |   M  |   B  |      |           |      |   X  |   K  |   J  |   Q  |   ;  | RShift |
  * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |LCTRL|ALT  |CTL-TAB|CTLShTab| LGui|                                       |  RGui| UP   | DOWN |  ALT | RCTRL  |
+ *   |LCTRL|ALT  |CTLShTab|CTL-TAB| LGui|                                       |  RGui| UP   | DOWN |  ALT | RCTRL  |
  *   `----------------------------------'                                       `----------------------------------'
  *                                        ,-------------.       ,-------------.
- *                                        | Alt  | LGui |       | RGui |Alt   |
+ *                                        | Alt  |      |       |      |Alt   |
  *                                 ,------|------|------|       |------+--------+------.
  *                                 |      |      | Home |       | PgUp |        |      |
- *                                 | Space|Backsp|------|       |------|  Tab   |Enter |
- *                                 |mirror|ace   | End  |       | PgDn |        |mirror|
+ *                                 | Space|DELETE|------|       |------|  Tab   |Enter |
+ *                                 |mirror|      | End  |       | PgDn |        |mirror|
  *                                 `--------------------'       `----------------------'
  */
 // If it accepts an argument (i.e, is a function), it doesn't need KC_.
 // Otherwise, it needs KC_*
 [HALFDVORAK] = LAYOUT_ergodox(  // layer 0 : default
         // left hand
-        KC_BSPC,         KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   KC_LEFT,
-        KC_SLASH,         KC_L,         KC_R,   KC_C,   KC_G,   KC_F,   TG(SYMB),
+        KC_BSPC,         KC_0,         KC_9,   KC_8,   KC_7,   KC_6,   KC_BSLS,
+        KC_SLASH,         KC_L,         KC_R,   KC_C,   KC_G,   KC_F,   KC_RBRC,
         KC_ENT,        KC_S,         KC_N,   KC_T,   KC_H,   KC_D,
-        KC_LSFT,        KC_Z,  		  KC_V,   KC_W,   KC_M,   KC_B,   ALL_T(KC_NO),
-        KC_LCTRL, 		KC_LALT,	  LCTL(KC_TAB), LCTL(LSFT(KC_TAB)),  KC_LGUI,
-                                              KC_LALT,  KC_TRANSPARENT,
+        KC_LSFT,        KC_Z,  		  KC_V,   KC_W,   KC_M,   KC_B,   KC_EQL,
+        KC_LCTRL, 		KC_LALT,	  LCTL(LSFT(KC_TAB)),LCTL(KC_TAB),  KC_TRNS,
+                                              KC_TRANSPARENT,  KC_TRANSPARENT,
                                                               KC_HOME,
-                                         KC_TRANSPARENT,KC_BSPC,KC_END,
+                                         KC_TRANSPARENT,KC_DEL,KC_END,
         // right hand
-             KC_RGHT,     KC_6,   KC_7,  KC_8,   KC_9,   KC_0,             KC_ESC,
-             TG(SYMB),    KC_Y,   KC_P,  KC_DOT, KC_COMM,KC_P,             KC_TAB,
-                          KC_I,   KC_U,  KC_E,   KC_O,   KC_A,		 	   KC_ENT,
-             MEH_T(KC_NO),KC_X,   KC_K,  KC_J,	 KC_Q,   KC_SCLN,	   	   KC_RSFT,
+             KC_GRAVE,     KC_5,   KC_4,  KC_3,   KC_2,   KC_5,             KC_ESC,
+             KC_LBRC,    KC_Y,   KC_P,  KC_DOT, KC_COMM,KC_P,             KC_TAB,
+                          KC_I,   KC_U,  KC_E,   KC_O,   KC_A,		 	   KC_BSPC,
+             KC_MINUS,KC_X,   KC_K,  KC_J,	 KC_Q,   KC_SCLN,	   	   KC_RSFT,
                                   KC_RGUI, KC_UP,KC_DOWN,KC_RALT,           KC_RCTRL,
-             KC_TRANSPARENT,        KC_RALT,
+             KC_TRANSPARENT,        KC_TRNS,
              KC_PGUP,
              KC_PGDN,KC_TAB, KC_TRANSPARENT
     ),
 /* Keymap 5: Symbol Layer
  *
  * ,---------------------------------------------------.           ,--------------------------------------------------.
- * |Version  |  F1  |  F2  |  F3  |  F4  |  F5  |      |           |      |  F6  |  F7  |  F8  |  F9  |  F10 |   F11  |
+ * |Version  |  F1  |  F2  |  F3  |  F4  |  F5  |   F6 |           |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |BkSp    |
  * |---------+------+------+------+------+------+------|           |------+------+------+------+------+------+--------|
- * |         |   !  |   @  |   {  |   }  |   |  |      |           |      |   Up |   7  |   8  |   9  |   *  |   F12  |
+ * |         |   /  |   \  |   {  |   }  |   |  |      |           |      |   Up |   7  |   8  |   9  |   *  |   /    |
  * |---------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |         |   #  |   $  |   (  |   )  |   `  |------|           |------| Down |   4  |   5  |   6  |   +  |        |
+ * |         |   '  |   ;  |   (  |   )  |   `  |------|           |------| Down |   4  |   5  |   6  |   -  | ENTER  |
  * |---------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |         |   %  |   ^  |   [  |   ]  |   ~  |      |           |      |   &  |   1  |   2  |   3  |   \  |        |
+ * |         |   -  |   =  |   [  |   ]  |   ~  |      |           |      |   &  |   1  |   2  |   3  |   +  |        |
  * `---------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
  *   | EPRM  |      |      |      |      |                                       |      |    . |   0  |   =  |      |
  *   `-----------------------------------'                                       `----------------------------------'
  *                                        ,-------------.       ,-------------.
- *                                        |Animat|      |       |Toggle|Solid |
+ *                                        |      |      |       |      |      |
  *                                 ,------|------|------|       |------+------+------.
- *                                 |Bright|Bright|      |       |      |Hue-  |Hue+  |
- *                                 |ness- |ness+ |------|       |------|      |      |
  *                                 |      |      |      |       |      |      |      |
+ *                                 |mirror|      |------|       |------|      |mirror|
+ *                                 |space |      |      |       |      |      |enter |
  *                                 `--------------------'       `--------------------'
  */
 // SYMBOLS
 [SYMB] = LAYOUT_ergodox(
        // left hand
-       VRSN,   KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_TRNS,
-       KC_TRNS,KC_EXLM,KC_AT,  KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS,
-       KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV,
-       KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS,
-          EPRM,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
-                                       RGB_MOD,KC_TRNS,
-                                               KC_TRNS,
-                               RGB_VAD,RGB_VAI,KC_TRNS,
+       VRSN,   KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,
+       KC_NO,KC_SLASH,KC_BSLS,  KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS,
+       KC_NO,KC_QUOT,KC_SCLN, KC_LPRN,KC_RPRN,KC_GRV,
+       KC_NO,KC_MINUS,KC_EQL,KC_LBRC,KC_RBRC,KC_TILD,KC_NO,
+          EPRM,KC_NO,KC_NO,KC_NO,KC_TRNS,
+                                         KC_TRNS,KC_NO,
+                                               KC_NO,
+                          LT(HALFSYMB, KC_SPACE),KC_NO,KC_NO,
        // right hand
-       KC_TRNS, KC_F6,   KC_F7,  KC_F8,   KC_F9,   KC_F10,  KC_F11,
-       KC_TRNS, KC_UP,   KC_7,   KC_8,    KC_9,    KC_ASTR, KC_F12,
-                KC_DOWN, KC_4,   KC_5,    KC_6,    KC_PLUS, KC_TRNS,
-       KC_TRNS, KC_AMPR, KC_1,   KC_2,    KC_3,    KC_BSLS, KC_TRNS,
-                         KC_TRNS,KC_DOT,  KC_0,    KC_EQL,  KC_TRNS,
-       RGB_TOG, RGB_SLD,
-       KC_TRNS,
-       KC_TRNS, RGB_HUD, RGB_HUI
+       KC_F7, KC_F8,   KC_F9,  KC_F10,   KC_F11,   KC_F12,  KC_BSPC,
+       KC_NO, KC_UP, KC_KP_7, KC_KP_8,  KC_KP_9,KC_KP_ASTERISK, KC_KP_SLASH,
+            KC_DOWN, KC_KP_4, KC_KP_5,  KC_KP_6,  KC_KP_MINUS, KC_KP_ENTER,
+       KC_NO,KC_AMPR,KC_KP_1, KC_KP_2,  KC_KP_3,   KC_KP_PLUS, KC_NO,
+                         KC_NO,KC_DOT,  KC_0,    KC_KP_EQUAL,  KC_NO,
+       KC_NO, KC_TRNS,
+       KC_NO,
+       KC_NO, KC_NO, LT(HALFSYMB, KC_ENT)
 ),
-/* Keymap 6: Media and mouse keys
+/* Keymap 6: Mirrored Symbol Layer
+ *
+ * ,---------------------------------------------------.           ,--------------------------------------------------.
+ * |delete   |  F12 |  F11 |  F10 |  F9  |  F8  |   F7 |           |  F6  |  F5  |  F4  |  F3  |  F2  |  F1  |BkSp    |
+ * |---------+------+------+------+------+------+------|           |------+------+------+------+------+------+--------|
+ * |         |      |   7  |   8  |   9  |   *  |   /  |           |      |   |  |   {  |   }  |   /  |   \  |        |
+ * |---------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |         |      |   4  |   5  |   6  |   -  |------|           |------|   `  |   (  |   )  |   ;  |   '  |        |
+ * |---------+------+------+------+------+------|enter |           |      |------+------+------+------+------+--------|
+ * |         |      |   1  |   2  |   3  |   +  |      |           |      |   ~  |   [  |   ]  |   =  |   -  |        |
+ * `---------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   | EPRM  |      |   0  |  .   |  =   |                                       |      |      |      |      |      |
+ *   `-----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |      |      |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// SYMBOLS
+[HALFSYMB] = LAYOUT_ergodox(
+       // left hand
+       KC_BSPC,     KC_F12,  KC_F11,  KC_F10,  KC_F9,  KC_F8,  KC_F7,
+       KC_NO,KC_NO,KC_KP_7, KC_KP_8, KC_KP_9,KC_KP_ASTERISK,KC_KP_SLASH,
+       KC_ENTER,KC_NO,KC_KP_4, KC_KP_5, KC_KP_6,KC_KP_MINUS,
+       KC_NO,KC_NO,KC_KP_1, KC_KP_2, KC_KP_3,KC_KP_PLUS,KC_KP_ENTER,
+          EPRM,KC_NO,KC_KP_0,KC_KP_DOT,KC_KP_EQUAL,
+                                         KC_TRNS,KC_NO,
+                                               KC_NO,
+                          KC_TRANSPARENT,KC_NO,KC_NO,
+       // right hand
+       KC_F6, KC_F5,   KC_F4,  KC_F3,   KC_F2,   KC_F1,  KC_BSPC,
+       KC_NO,KC_PIPE,KC_LCBR,KC_RCBR, KC_SLASH, KC_BSLS, KC_NO,
+             KC_GRV,KC_LPRN,KC_RPRN,  KC_SCLN, KC_QUOT, KC_NO,
+       KC_NO, KC_TILD,KC_LBRC,KC_RBRC, KC_EQL,  KC_MINUS, KC_NO,
+                         KC_NO,KC_NO,  KC_NO,    KC_NO,  KC_NO,
+       KC_NO, KC_TRNS,
+       KC_NO,
+       KC_NO, KC_NO, KC_TRANSPARENT
+),
+
+/* Keymap 7: Steno for Plover from https://github.com/shayneholmes/tmk_keyboard/commit/11290f8489013018f778627db725160c745e75bd
  *
  * ,--------------------------------------------------.           ,--------------------------------------------------.
  * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
  * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- * |        |      |      | MsUp |      |      |      |           |      |      |      |      |      |      |        |
+ * |        |   1  |   2  |   3  |   4  |   5  |      |           |      |  6   |  7   |   8  |   9  |  0   |        |
  * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |      |MsLeft|MsDown|MsRght|      |------|           |------|      |      |      |      |      |  Play  |
+ * |        |   q  |   w  |   e  |   r  |   t  |------|           |------|  y   |  u   |   i  |   o  |  p   |   [    |
  * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |        |      |      |      |      |      |      |           |      |      |      | Prev | Next |      |        |
+ * |        |   a  |   s  |   d  |   f  |   g  |      |           |      |  h   |  j   |   k  |   l  |  ;   |   '    |
  * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |      |      |      | Lclk | Rclk |                                       |VolUp |VolDn | Mute |      |      |
+ *   |      |      |      |      |      |                                       |      |      |      |      |      |
  *   `----------------------------------'                                       `----------------------------------'
  *                                        ,-------------.       ,-------------.
  *                                        |      |      |       |      |      |
  *                                 ,------|------|------|       |------+------+------.
- *                                 |      |      |      |       |      |      |Brwser|
- *                                 |      |      |------|       |------|      |Back  |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |   c  |   v  |------|       |------|  n   |  m   |
  *                                 |      |      |      |       |      |      |      |
  *                                 `--------------------'       `--------------------'
  */
-// MEDIA AND MOUSE
-[MDIA] = LAYOUT_ergodox(
-       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-       KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS,
-       KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS,
-       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-       KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2,
-                                           KC_TRNS, KC_TRNS,
-                                                    KC_TRNS,
-                                  KC_TRNS, KC_TRNS, KC_TRNS,
-    // right hand
-       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-                 KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY,
-       KC_TRNS,  KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS,
-                          KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS,
-       KC_TRNS, KC_TRNS,
-       KC_TRNS,
-       KC_TRNS, KC_TRNS, KC_WBAK
+
+[PLVR] = LAYOUT_ergodox(  // layout: layer 4: Steno for Plover
+        // left hand
+        KC_NO, KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,
+        KC_NO,  KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_TRNS,
+        KC_NO,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,
+        KC_NO,  KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_NO,
+        KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,
+                                      KC_FN4, KC_NO,
+                                           KC_NO,
+                                 KC_C,   KC_V,   KC_NO,
+        // right hand
+             KC_TRNS,  KC_NO,   KC_NO,   KC_NO,  KC_NO,   KC_NO,   KC_TRNS,
+             KC_TRNS,   KC_6,    KC_7,    KC_8,   KC_9,    KC_0,   KC_TRNS,
+                        KC_Y,   KC_U,    KC_I,    KC_O,   KC_P,    KC_LBRC,
+               KC_NO,   KC_H,    KC_J,    KC_K,   KC_L, KC_SCLN,   KC_QUOT,
+                              KC_TRNS, KC_TRNS,  KC_NO,   KC_NO,     KC_NO,
+        KC_TRNS, KC_TRNS,
+        KC_TRNS,
+        KC_NO,  KC_N,   KC_M
 ),
+/* Keymap 8: shortcuts
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |  ESC   |   1  |   2  |   3  |   4  |   5  | LEFT |           | RIGHT|   6  |   7  |   8  |   9  |   0  |  BSPC  |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | TAB    |   Q  |   W  |   E  |   R  |   T  |  L1  |           |  L1  |   Y  |   U  |   I  |   O  |   P  |   \    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | BkSp   |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |   ;  |ENTER   |
+ * |--------+------+------+------+------+------| -    |           | =    |------+------+------+------+------+--------|
+ * | LShift |   Z  |   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ,  |   .  |   /  | RShift |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |LCTRL|ALT  |CTLShTab|CTL-TAB|     |                                       |  RGui| UP   | DOWN |  ALT | RCTRL  |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        | Alt  |Dvorak|       |Plover|Alt   |
+ *                                 ,------|------|------|       |------+--------+------.
+ *                                 |      |      | Home |       | PgUp |        |      |
+ *                                 | Space|DELETE|------|       |------|  Tab   |Enter |
+ *                                 |mirror|      | End  |       | PgDn |        |mirror|
+ *                                 `--------------------'       `----------------------'
+ */
+// If it accepts an argument (i.e, is a function), it doesn't need KC_.
+// Otherwise, it needs KC_*
+[SHORTCUTS] = LAYOUT_ergodox(  // layer 0 : default
+        // left hand
+        KC_ESC,         KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   KC_NO,
+        KC_TAB,   LCTL(KC_Q),   LCTL(KC_W),LCTL(KC_E),LCTL(KC_R),LCTL(KC_T),   KC_NO,
+        KC_BSPC,  LCTL(KC_A),   LCTL(KC_S),LCTL(KC_D),LCTL(KC_F),LCTL(KC_G),
+        KC_LSFT,  LCTL(KC_Z),  	LCTL(KC_X),LCTL(KC_C),LCTL(KC_V),LCTL(KC_B),   KC_MINUS,
+        KC_LCTRL, 		KC_LALT,	  LCTL(LSFT(KC_TAB)),LCTL(KC_TAB),  KC_TRANSPARENT,
+                                              KC_NO,  KC_NO,
+
+                                                              KC_NO,
+                                         KC_NO,KC_NO,KC_NO,
+        // right hand
+             KC_RGHT,     KC_6,   KC_7,  KC_8,   KC_9,   KC_0,             KC_BSPC,
+             TG(SYMB),    KC_Y,   KC_U,  KC_I,   KC_O,   KC_P,             KC_BSLS,
+                          KC_H,   KC_J,  KC_K,   KC_L,   KC_SCLN,		   KC_ENT,
+             KC_EQL,KC_N,   KC_M,  KC_COMM,KC_DOT, KC_SLASH,   	   KC_RSFT,
+                                  KC_RGUI, KC_UP,KC_DOWN,KC_RALT,           KC_RCTRL,
+             KC_NO,        KC_NO,
+             KC_NO,
+             KC_NO,KC_NO, KC_NO
+    ),
 };
 
 const uint16_t PROGMEM fn_actions[] = {

keyboards/ergodox_infinity/keymaps/halfkeyboard/visualizer.c

@@ -0,0 +1,72 @@
+/*
+Copyright 2017 Fred Sundvik
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "simple_visualizer.h"
+
+#define RED 0
+#define ORANGE 21
+#define YELLOW 42
+#define SPRING_GREEN 64
+#define GREEN 85
+#define TURQUOISE 107
+#define CYAN 127
+#define OCEAN 149
+#define BLUE 170
+#define VIOLET 192
+#define MAGENTA 212
+#define RASPBERRY 234
+
+// This function should be implemented by the keymap visualizer
+// Don't change anything else than state->target_lcd_color and state->layer_text as that's the only thing
+// that the simple_visualizer assumes that you are updating
+// Also make sure that the buffer passed to state->layer_text remains valid until the previous animation is
+// stopped. This can be done by either double buffering it or by using constant strings
+static void get_visualizer_layer_and_color(visualizer_state_t* state) {
+    uint8_t saturation = 255;
+    /* if (state->status.leds & (1u << USB_LED_CAPS_LOCK)) {
+        saturation = 255;
+    } */
+    if (state->status.layer & 0x100) {
+        state->target_lcd_color = LCD_COLOR(MAGENTA, saturation, 0xFF);
+        state->layer_text = "Shortcuts Layer";
+    }
+    else    if (state->status.layer & 0x80) {
+        state->target_lcd_color = LCD_COLOR(VIOLET, saturation, 0xFF);
+        state->layer_text = "Plover";
+    }
+    else if (state->status.layer & 0x40) {
+        state->target_lcd_color = LCD_COLOR(RASPBERRY, saturation, 0xFF);
+        state->layer_text = "Mirrored Symbols";
+    }
+    else if (state->status.layer & 0x20) {
+        state->target_lcd_color = LCD_COLOR(RED, saturation, 0xFF);
+        state->layer_text = "Symbols";
+    }
+    else if (state->status.layer & 0x8) {
+        state->target_lcd_color = LCD_COLOR(OCEAN, saturation, 0xFF);
+        state->layer_text = "Mirrored Dvorak";
+    }
+    else if (state->status.layer & 0x4) {
+        state->target_lcd_color = LCD_COLOR(BLUE, saturation, 0xFF);
+        state->layer_text = "Dvorak";
+    }
+    else if (state->status.layer & 0x2) {
+        state->target_lcd_color = LCD_COLOR(ORANGE, saturation, 0xFF);
+        state->layer_text = "Mirrored Qwerty";
+    }
+    else {
+        state->target_lcd_color = LCD_COLOR(YELLOW, saturation, 0xFF);
+        state->layer_text = "Qwerty";
+    }
+}

keyboards/kbd75/keymaps/smt/keymap.c

@@ -0,0 +1,180 @@
+#include "kbd75.h"
+
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _FL 3
+#define _CL 4
+
+enum planck_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK
+};
+
+// Helpful defines
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+// Custom macros
+#define CTL_ESC     CTL_T(KC_ESC)               // Tap for Esc, hold for Ctrl
+#define HPR_TAB     ALL_T(KC_TAB)               // Tap for Tab, hold for Hyper (Super+Ctrl+Shift+Alt)
+#define SFT_ENT     SFT_T(KC_ENT)               // Tap for Enter, hold for Shift
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* 0: Qwerty layer
+   * ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+   * │ ESC │ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │PRSCR│PAUSE│ DEL │
+   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+   * │  `  │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │  \  │ INS │HOME │
+   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+   * │H_TAB│  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │BKSPC│█████│PG_UP│
+   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+   * │C_ESC│  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │  ;  │  '  │▒▒▒▒▒│ENTER│█████│PG_DN│
+   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+   * │LSHFT│▒▒▒▒▒│  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │  /  │▒▒▒▒▒│RSHFT│ UP  │ END │
+   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+   * │LCTRL│L_GUI│L_GUI│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ _FL │R_GUI│LEFT │DOWN │RIGHT│
+   * └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+   */
+
+  /* 0: ANSI qwerty */
+  [_QWERTY] = KEYMAP(
+    KC_ESC,   KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   KC_PSCR,  KC_PAUS,  KC_DEL, \
+    KC_GRV,   KC_1,     KC_2,     KC_3,     KC_4,     KC_5,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     KC_MINS,  KC_EQL,   KC_BSLS,  KC_INS,   KC_HOME,  \
+    HPR_TAB,  KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,     KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,     KC_LBRC,  KC_RBRC,  KC_BSPC,            KC_PGUP,  \
+    CTL_ESC,  KC_A,     KC_S,     KC_D,     KC_F,     KC_G,     KC_H,     KC_J,     KC_K,     KC_L,     KC_SCLN,  KC_QUOT,            KC_ENT,             KC_PGDN, \
+    KC_LSFT,  _______,  KC_Z,     KC_X,     KC_C,     KC_V,     KC_B,     KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,            SFT_ENT,  KC_UP,    KC_END, \
+    KC_LCTL,  KC_LGUI,  KC_LALT,                      KC_SPC,   KC_SPC,   KC_SPC,                       KC_RALT,  MO(_FL),  KC_RGUI,  KC_LEFT,  KC_DOWN,  KC_RGHT),
+
+  /* 1: Colemak layer
+   * ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+   * │ ESC │ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │PRSCR│PAUSE│ DEL │
+   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+   * │  `  │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │  \  │ INS │HOME │
+   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+   * │H_TAB│  Q  │  W  │  F  │  P  │  G  │  J  │  L  │  U  │  Y  │  ;  │  [  │  ]  │BKSPC│█████│PG_UP│
+   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+   * │C_ESC│  A  │  R  │  S  │  T  │  D  │  H  │  N  │  E  │  I  │  O  │  '  │▒▒▒▒▒│ENTER│█████│PG_DN│
+   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+   * │LSHFT│▒▒▒▒▒│  Z  │  X  │  C  │  V  │  B  │  K  │  M  │  ,  │  .  │  /  │▒▒▒▒▒│RSHFT│ UP  │ END │
+   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+   * │LCTRL│L_GUI│L_GUI│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ _FL │R_GUI│LEFT │DOWN │RIGHT│
+   * └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+   */
+
+  /* 1: ANSI colemak */
+  [_COLEMAK] = KEYMAP(
+    KC_ESC,   KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   KC_PSCR,  KC_PAUS,  KC_DEL, \
+    KC_GRV,   KC_1,     KC_2,     KC_3,     KC_4,     KC_5,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     KC_MINS,  KC_EQL,   KC_BSLS,  KC_INS,   KC_HOME,  \
+    HPR_TAB,  KC_Q,     KC_W,     KC_F,     KC_P,     KC_G,     KC_J,     KC_L,     KC_U,     KC_Y,     KC_SCLN,  KC_LBRC,  KC_RBRC,  KC_BSPC,            KC_PGUP,  \
+    CTL_ESC,  KC_A,     KC_R,     KC_S,     KC_T,     KC_D,     KC_H,     KC_N,     KC_E,     KC_I,     KC_O,     KC_QUOT,            KC_ENT,             KC_PGDN, \
+    KC_LSFT,  _______,  KC_Z,     KC_X,     KC_C,     KC_V,     KC_B,     KC_K,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,            SFT_ENT,  KC_UP,    KC_END, \
+    KC_LCTL,  KC_LGUI,  KC_LALT,                      KC_SPC,   KC_SPC,   KC_SPC,                       KC_RALT,  MO(_FL),  KC_RGUI,  KC_LEFT,  KC_DOWN,  KC_RGHT),
+
+  /* 2: Dvorak layer
+   * ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+   * │ ESC │ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │PRSCR│PAUSE│ DEL │
+   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+   * │  `  │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │  \  │ INS │HOME │
+   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+   * │H_TAB│  '  │  ,  │  .  │  P  │  Y  │  F  │  G  │  C  │  R  │  L  │  /  │  =  │BKSPC│█████│PG_UP│
+   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+   * │C_ESC│  A  │  O  │  E  │  U  │  I  │  D  │  H  │  T  │  N  │  S  │  -  │▒▒▒▒▒│ENTER│█████│PG_DN│
+   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+   * │LSHFT│▒▒▒▒▒│  ;  │  Q  │  J  │  K  │  X  │  B  │  M  │  W  │  V  │  Z  │▒▒▒▒▒│RSHFT│ UP  │ END │
+   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+   * │LCTRL│L_GUI│L_GUI│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ _FL │R_GUI│LEFT │DOWN │RIGHT│
+   * └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+   */
+
+  /* 2: ANSI dvorak */
+  [_DVORAK] = KEYMAP(
+    KC_ESC,   KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   KC_PSCR,  KC_PAUS,  KC_DEL, \
+    KC_GRV,   KC_1,     KC_2,     KC_3,     KC_4,     KC_5,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     KC_LBRC,  KC_RBRC,  KC_BSLS,  KC_INS,   KC_HOME, \
+    HPR_TAB,  KC_QUOT,  KC_COMM,  KC_DOT,   KC_P,     KC_Y,     KC_F,     KC_G,     KC_C,     KC_R,     KC_L,     KC_SLSH,  KC_EQL,   KC_BSPC,            KC_PGUP,  \
+    CTL_ESC,  KC_A,     KC_O,     KC_E,     KC_U,     KC_I,     KC_D,     KC_H,     KC_T,     KC_N,     KC_S,     KC_MINS,            KC_ENT,             KC_PGDN, \
+    KC_LSFT,  _______,  KC_SCLN,  KC_Q,     KC_J,     KC_K,     KC_X,     KC_B,     KC_M,     KC_W,     KC_V,     KC_Z,               SFT_ENT,  KC_UP,    KC_END, \
+    KC_LCTL,  KC_LGUI,  KC_LALT,                      KC_SPC,   KC_SPC,   KC_SPC,                       KC_RALT,  MO(_FL),  KC_RGUI,  KC_LEFT,  KC_DOWN,  KC_RGHT),
+
+  /* 3: Function layer
+   * ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+   * │     │     │     │     │     │     │     │     │     │     │     │     │     │     │     │     │
+   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+   * │     │     │     │     │     │     │     │     │     │     │     │     │     │     │     │     │
+   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+   * │     │     │     │     │     │     │     │     │     │     │     │     │     │     │█████│     │
+   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+   * │     │     │ _CL │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │█████│     │
+   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+   * │     │▒▒▒▒▒│     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │PG_UP│     │
+   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+   * │     │     │     │█████│█████│█████│     │█████│█████│█████│     │ _FL │     │HOME │PG_DN│ END │
+   * └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+   */
+
+  /* 3: ANSI Fn layer */
+  [_FL] = KEYMAP(
+    _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______, \
+    _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______, \
+    _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,            _______, \
+    _______,  _______,  MO(_CL),  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,            _______,            _______, \
+    _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,            KC_PGUP,  _______, \
+    _______,  _______,  _______,                      _______,  _______,  _______,                      _______,  MO(_FL),  _______,  KC_HOME,  KC_PGDN,  KC_END),
+
+  /* 4: Control layer
+   * ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+   * │     │     │     │     │     │     │     │     │     │     │     │     │     │     │     │     │
+   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+   * │     │     │     │     │     │     │     │     │     │     │     │     │     │     │     │ RGB │
+   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+   * │     │     │     │     │RESET│     │     │QWRTY│COLMK│DVORK│     │     │     │     │█████│RGBV+│
+   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+   * │     │     │ _CL │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │█████│RGBV-│
+   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+   * │ _FL │▒▒▒▒▒│     │     │     │     │     │     │     │     │     │     │▒▒▒▒▒│     │RGBS+│     │
+   * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+   * │     │     │     │█████│█████│█████│RGB_M│█████│█████│█████│     │ _FL │     │RGBH-│RGBS-│RGBH+│
+   * └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+   */
+
+  /* 4: ANSI control layer */
+  [_CL] = KEYMAP(
+    _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______, \
+    _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  RGB_TOG, \
+    _______,  _______,  _______,  _______,  RESET,    _______,  _______,  QWERTY,   COLEMAK,  DVORAK,   _______,  _______,  _______,  _______,            RGB_VAI, \
+    _______,  _______,  MO(_CL),  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,            _______,            RGB_VAD, \
+    MO(_FL),  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,            RGB_SAI,  _______, \
+    _______,  _______,  _______,                      _______,  RGB_MOD,  _______,                      _______,  MO(_FL),  _______,  RGB_HUD,  RGB_SAD,  RGB_HUI),
+};
+
+
+void persistent_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        persistent_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        persistent_default_layer_set(1UL<<_COLEMAK);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        persistent_default_layer_set(1UL<<_DVORAK);
+      }
+      return false;
+      break;
+  }
+  return true;
+}

keyboards/planck/keymaps/dshields/config.h

@@ -5,6 +5,7 @@
 
 #define _______ KC_TRNS
 #define XXXXXXX KC_NO
+#define PREVENT_STUCK_MODIFIERS
 
 #define USB_MAX_POWER_CONSUMPTION 100
 #define ONESHOT_TAP_TOGGLE        2
@@ -31,24 +32,8 @@
 #define OSM_ALT OSM(MOD_LALT)
 #define OSM_SFT OSM(MOD_LSFT)
 
-// tap dance keys
-#define TD_SCLN TD(TDK_SCLN)
-#define TD_COMM TD(TDK_COMM)
-#define TD_DOT  TD(TDK_DOT)
-#define TD_SLSH TD(TDK_SLSH)
-
-// macros
-#define ACTION_TAP_DANCE_FN_KEYCODE(user_fn, kc) {  \
-    .fn = { NULL, user_fn, NULL }, \
-    .user_data = (void *)&((qk_tap_dance_pair_t) { kc, 0 }) \
-}
-
-#define ACTION_TAP_DANCE_FN_KEYCODE2(user_fn, kc1, kc2) {  \
-    .fn = { NULL, user_fn, NULL }, \
-    .user_data = (void *)&((qk_tap_dance_pair_t) { kc1, kc2 }) \
-}
-
-#define TAP(keycode) register_code16(keycode); unregister_code16(keycode)
+// mod-tap keys
+#define MT_SPC  SFT_T(KC_SPC)
 
 #endif
 

keyboards/planck/keymaps/dshields/keymap.c

@@ -6,7 +6,6 @@ extern keymap_config_t keymap_config;
 
 enum planck_layers { DEF, LWR, RSE, FUN };
 enum planck_keycodes { DYNAMIC_MACRO_RANGE = SAFE_RANGE };
-enum tap_dance_keys { TDK_SCLN, TDK_COMM, TDK_DOT, TDK_SLSH };
 
 #include "dynamic_macro.h"
 
@@ -24,9 +23,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      */
     [DEF] = {
         {KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_ESC,  KC_BSPC, KC_Y,    KC_U,    KC_I,    KC_O,    KC_P   },
-        {KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_TAB,  KC_ENT,  KC_H,    KC_J,    KC_K,    KC_L,    TD_SCLN},
-        {KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    OSM_SFT, DM_PLAY, KC_N,    KC_M,    TD_COMM, TD_DOT,  TD_SLSH},
-        {OSM_CTL, KC_LGUI, OSM_ALT, OSL_FUN, OSL_LWR, KC_SPC,  KC_SPC,  OSL_RSE, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+        {KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_TAB,  KC_ENT,  KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN},
+        {KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    OSM_SFT, DM_PLAY, KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH},
+        {OSM_CTL, KC_LGUI, OSM_ALT, OSL_FUN, OSL_LWR, MT_SPC,  MT_SPC,  OSL_RSE, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
     },
     /* Lower
      * ,-----------------------------------------------------------------------------------.
@@ -81,33 +80,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     },
 };
 
-void tap_dance_triple(qk_tap_dance_state_t *state, void *user_data) {
-    qk_tap_dance_pair_t *pair = (qk_tap_dance_pair_t *)user_data;
-    uint16_t keycode = pair->kc1;
-
-    switch(state->count) {
-        case 2:
-            register_code(KC_LSFT);
-            TAP(keycode);
-            unregister_code(KC_LSFT);
-            break;
-        case 3: // fall through
-            if (pair->kc2) {
-                keycode = pair->kc2;
-            }
-            TAP(keycode);
-        default:
-            TAP(keycode);
-    }
-}
-
-qk_tap_dance_action_t tap_dance_actions[] = {
-    [TDK_SCLN]  = ACTION_TAP_DANCE_FN_KEYCODE2(tap_dance_triple, KC_SCLN, KC_COLN),
-    [TDK_COMM]  = ACTION_TAP_DANCE_FN_KEYCODE2(tap_dance_triple, KC_COMM, KC_LABK),
-    [TDK_DOT]   = ACTION_TAP_DANCE_FN_KEYCODE (tap_dance_triple, KC_DOT),
-    [TDK_SLSH]  = ACTION_TAP_DANCE_FN_KEYCODE (tap_dance_triple, KC_SLSH)
-};
-
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
     if (!process_record_dynamic_macro(keycode, record)) {
         return false;

keyboards/planck/keymaps/dshields/rules.mk

@@ -4,10 +4,9 @@ endif
 
 MOUSEKEY_ENABLE  = yes # Mouse keys(+4700)
 COMMAND_ENABLE   = yes # Commands for debug and configuration
-CONSOLE_ENABLE   = yes # Console for debug(+400)
+CONSOLE_ENABLE   = no  # Console for debug(+400)
 BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
-TAP_DANCE_ENABLE = yes 
 AUDIO_ENABLE     = no
 API_SYSEX_ENABLE = no

keyboards/readme.md

@@ -44,6 +44,7 @@ These keyboards are part of the QMK repository, but their manufacturers are not
 * [Happy Hacking Keyboard](/keyboards/hhkb) — The Happy Hacking keyboard can be hacked with a custom controller to run QMK.
 * [Infinity 60%](/keyboards/infinity60) - — Compact community keyboard by Input Club.
 * [JD45](/keyboards/jd45) — Another Geekhack community project, designed by jdcarpe.
+* [JJ40](/keyboards/jj40) — ps2avrGB based ortholinear sold by KPrepublic
 * [KBD75](/keyboards/kbd75) — A 75% keyboard made by made by KBDFans.
 * [KC60](/keyboards/kc60) — A programmable Chinese-made keyboard, lost in the mists of time.
 * [Kinesis Advantage](/keyboards/kinesis) — Contoured ergonomic keyboard by Kinesis Computer Ergonomics.
@@ -59,3 +60,4 @@ These keyboards are part of the QMK repository, but their manufacturers are not
 * [WhiteFox](/keyboards/whitefox) — A 65% keyboard designed as a partnership by matt3o, Massdrop and Input Club
 * [Vision Division](/keyboards/vision_division) — Full Size / Split Linear Keyboard by IBNobody.
 * [XD75](/keyboards/xd75) — 15x5 ortholinear keyboard by XIUDI.
+* [YMDK NP21](/keyboards/ymdk_np21) — ps2avrGB based number pad (numpad) sold by YMDK on Aliexpress. 

keyboards/satan/keymaps/chaser/keymap.c

@@ -0,0 +1,89 @@
+#include "satan.h"
+
+
+// Used for SHIFT_ESC
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+
+#define _______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap _BL: (Base Layer) Default Layer
+   * ,-----------------------------------------------------------.
+   * |Esc~| 1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
+   * |-----------------------------------------------------------|
+   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  |
+   * |-----------------------------------------------------------|
+   * |CAPS   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return |
+   * |-----------------------------------------------------------|
+   * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|  Up  |FN |
+   * |-----------------------------------------------------------|
+   * |Ctrl|Gui |Alt |      Space           |Alt |Left |Down|Right|
+   * `-----------------------------------------------------------'
+   */
+[_BL] = KEYMAP(
+    F(0)        ,KC_1   ,KC_2   ,KC_3   ,KC_4   ,KC_5   ,KC_6   ,KC_7   ,KC_8   ,KC_9   ,KC_0   ,KC_MINS,KC_EQL ,KC_BSPC    , _______,  \
+    KC_TAB      ,KC_Q   ,KC_W   ,KC_E   ,KC_R   ,KC_T   ,KC_Y   ,KC_U   ,KC_I   ,KC_O   ,KC_P   ,KC_LBRC,KC_RBRC,KC_BSLS    ,           \
+    KC_CAPS     ,KC_A   ,KC_S   ,KC_D   ,KC_F   ,KC_G   ,KC_H   ,KC_J   ,KC_K   ,KC_L   ,KC_SCLN,KC_QUOT,_______,KC_ENT     ,           \
+    KC_LSHIFT   ,_______,KC_Z   ,KC_X   ,KC_C   ,KC_V   ,KC_B   ,KC_N   ,KC_M   ,KC_COMM,KC_DOT ,KC_SLSH,KC_UP  ,MO(_FL)    ,           \
+    KC_LCTL     ,KC_LGUI,KC_LALT,                        KC_SPC                 ,KC_RALT,KC_LEFT,KC_DOWN,KC_RIGHT),
+  /* Keymap _FL: Function Layer
+   * ,-----------------------------------------------------------.
+   * |GRV|F1 |F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|   DEL |
+   * |-----------------------------------------------------------|
+   * |  MB3|MB2|MUP|MB1|MWU|   |   |   |INS|   |RST|   |   |Print|
+   * |-----------------------------------------------------------|
+   * |      | ML|MDN|MR |MWD|   |   |       |   |   |   |        |
+   * |-----------------------------------------------------------|
+   * |        |   |   |   |   |   |   |   |   |   |   |PGUP|     |
+   * |-----------------------------------------------------------|
+   * |    |    |    |                        |Ctrl|HOME|PGD |END |
+   * `-----------------------------------------------------------'
+   */
+[_FL] = KEYMAP(
+    KC_GRV      , KC_F1     ,KC_F2      ,KC_F3      ,KC_F4        ,KC_F5  ,KC_F6  ,KC_F7  ,KC_F8  ,KC_F9  ,KC_F10 ,KC_F11 ,KC_F12     ,KC_DEL     ,_______,  \
+    KC_MS_BTN3  ,KC_MS_BTN2 ,KC_MS_UP   ,KC_MS_BTN1 ,KC_MS_WH_UP  ,_______,_______,_______,KC_INS ,_______,RESET  ,_______,_______    ,KC_PSCREEN ,          \
+    _______     ,KC_MS_LEFT ,KC_MS_DOWN ,KC_MS_RIGHT,KC_MS_WH_DOWN,_______,_______,_______,_______,_______,_______,_______,_______    ,_______    ,          \
+    _______     ,_______    ,_______    ,_______    ,_______      ,_______,_______,_______,_______,_______,_______,_______,KC_PGUP    ,_______    ,          \
+    KC_LCTL     ,_______    ,KC_LALT    ,                                  _______,                        KC_RCTL,KC_HOME,KC_PGDOWN  ,KC_END ),
+};
+
+enum function_id {
+    SHIFT_ESC,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0]  = ACTION_FUNCTION(SHIFT_ESC),
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  static uint8_t shift_esc_shift_mask;
+  switch (id) {
+    case SHIFT_ESC:
+      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
+      if (record->event.pressed) {
+        if (shift_esc_shift_mask) {
+          add_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          add_key(KC_ESC);
+          send_keyboard_report();
+        }
+      } else {
+        if (shift_esc_shift_mask) {
+          del_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          del_key(KC_ESC);
+          send_keyboard_report();
+        }
+      }
+      break;
+  }
+}

keyboards/satan/keymaps/chaser/readme.md

@@ -0,0 +1,38 @@
+# [dragonchasers](https://github.com/dragonchaser) Satan GH60 layout
+
+Layout derived from the default Satan GH60 keymap.
+
+![Photo of the keyboard](https://pbs.twimg.com/media/DQzlD0yX0AA8spX.jpg)
+
+## Layers
+
+### Base
+```
+,-----------------------------------------------------------.
+|Esc~| 1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
+|-----------------------------------------------------------|
+|Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  |
+|-----------------------------------------------------------|
+|CAPS   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return |
+|-----------------------------------------------------------|
+|Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|  Up  |FN |
+|-----------------------------------------------------------|
+|Ctrl|Gui |Alt |      Space           |Alt |Left |Down|Right|
+`-----------------------------------------------------------'
+```
+
+### Function Layer
+
+```
+,-----------------------------------------------------------.
+|GRV|F1 |F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|   DEL |
+|-----------------------------------------------------------|
+|  MB3|MB2|MUP|MB1|MWU|   |   |   |INS|   |RST|   |   |Print|
+|-----------------------------------------------------------|
+|      | ML|MDN|MR |MWD|   |   |       |   |   |   |        |
+|-----------------------------------------------------------|
+|        |   |   |   |   |   |   |   |   |   |   |PGUP|     |
+|-----------------------------------------------------------|
+|    |    |    |                        |Ctrl|HOME|PGD |END |
+`-----------------------------------------------------------'
+```

keyboards/satan/keymaps/chaser/rules.mk

@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/xd75/keymaps/c4software_bepo/README.md

@@ -0,0 +1,37 @@
+# c4software Custom Keyboard
+
+Layout for Bépo Dev
+
+```
+/* Native BepoDev for compatible computer
+ * .--------------------------------------------------------------------------------------------------------------------------------------.
+ * | ESC    | "      | <      | >      | (      | )      | %      | VOL-   | VOL+   | @      | +      | -      | /      | *      | =      |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+ * | TAB    | B      | E_ACUT | P      | O      | $      | E_GRAV | DEL    | E_CIRC | V      | D      | L      | J      | Z      | C_CEDIL|
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+ * | RALT   | A      | U      | I      | E      | ,      |        |        | C      | T      | S      | R      | N      | M      | W      |
+ * |--------+--------+--------+--------+--------+--------+ BACKSP + ENTER  +--------+--------+--------+--------------------------+--------|
+ * | LSHIFT | A_GRAV | Y      | X      | .      | K      |        |        | ’      | Q      | G      | H      | F      | UP     | RSHIFT |
+ * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+--------+-----------------+--------+--------|
+ * | LALT   | LCTRL  | FN     | LGUI   |        SPACE    |       RALT      |      SPACE      | RGUI   | FN     | LEFT   | DOWN   | RIGHT  |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */
+ ```
+
+ The FN layer :
+
+ ```
+/* FUNCTION
+ * .--------------------------------------------------------------------------------------------------------------------------------------.
+ * |        | F1     | F2     | F3     | F4     | F5     | F6     | F7     | F8     | P/     | P*     | F9     | F10    | F11    | F12    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        |        |        |        |        |        |        |        | P7     | P8     | P9     | -      | RGB_TOG| RGB_MOD| RGB_HUI|
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        | PREV   | PLAY   | NEXT   | STOP   |        |        |        | P4     | P5     | P6     | +      | RGB_SAI| RGB_SAD| RGB_VAI|
+ * |--------+--------+--------+--------+--------+--------+        +        +--------+--------+--------+--------+--------+--------+--------|
+ * |        | VOL-   | MUTE   | VOL+   |        |        |        |        | P1     | P2     | P3     | ENT    | RGB_VAD| Home   | RGB_HUD|
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | RESET  |        | FN     |        |                 |                 | P0              | .      | FN     |        | End    |        |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */
+ ```

keyboards/xd75/keymaps/c4software_bepo/config.h

@@ -0,0 +1,24 @@
+/* Copyright 2017 Benjamin Kesselring
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif

keyboards/xd75/keymaps/c4software_bepo/keymap.c

@@ -0,0 +1,90 @@
+/* Copyright 2017 Valentin Brosseau
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "xd75.h"
+#include "keymap_bepo.h"
+
+// Layer shorthand
+#define _BP 0
+#define _FN 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Native BepoDev for compatible computer
+ * .--------------------------------------------------------------------------------------------------------------------------------------.
+ * | ESC    | "      | <      | >      | (      | )      | %      | VOL-   | VOL+   | @      | +      | -      | /      | *      | =      |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+ * | TAB    | B      | E_ACUT | P      | O      | $      | E_GRAV | DEL    | E_CIRC | V      | D      | L      | J      | Z      | C_CEDIL|
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+ * | RALT   | A      | U      | I      | E      | ,      |        |        | C      | T      | S      | R      | N      | M      | W      |
+ * |--------+--------+--------+--------+--------+--------+ BACKSP + ENTER  +--------+--------+--------+--------------------------+--------|
+ * | LSHIFT | A_GRAV | Y      | X      | .      | K      |        |        | ’      | Q      | G      | H      | F      | UP     | RSHIFT |
+ * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+--------+-----------------+--------+--------|
+ * | LALT   | LCTRL  | FN     | LGUI   |        SPACE    |       RALT      |      SPACE      | RGUI   | FN     | LEFT   | DOWN   | RIGHT  |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
+ [_BP] = { /* BepoDev */
+  { KC_ESC,  BP_DQOT,    BP_LGIL,    BP_RGIL, BP_LPRN, BP_RPRN,    BP_PERCENT, KC_VOLD, KC_VOLU, BP_AT,   BP_PLUS, BP_MINUS, BP_SLASH, BP_ASTR, BP_EQUAL },
+  { KC_TAB,  BP_B,       BP_E_ACUTE, BP_P,    BP_O,    BP_DOLLAR,  BP_E_GRAVE, KC_DEL,  BP_DCRC, BP_V,    BP_D,    BP_L,     BP_J,     BP_Z,    BP_CCED  },
+  { KC_RALT, BP_A,       BP_U,       BP_I,    BP_E,    BP_COMMA,   KC_BSPC,    KC_ENT,  BP_C,    BP_T,    BP_S,    BP_R,     BP_N,     BP_M,    BP_W     },
+  { KC_LSFT, BP_A_GRAVE, BP_Y,       BP_X,    BP_DOT,  BP_K,       KC_TRNS,    KC_TRNS, BP_APOS, BP_Q,    BP_G,    BP_H,     BP_F,     KC_UP,   KC_RSFT  },
+  { KC_LALT, KC_LCTL,    MO(_FN),    KC_LGUI, KC_TRNS, KC_SPC,     KC_TRNS,    KC_RALT, KC_SPC,  KC_TRNS, KC_RGUI, MO(_FN),  KC_LEFT,  KC_DOWN, KC_RGHT  },
+ },
+
+/* FUNCTION
+ * .--------------------------------------------------------------------------------------------------------------------------------------.
+ * |        | F1     | F2     | F3     | F4     | F5     | F6     | F7     | F8     | P/     | P*     | F9     | F10    | F11    | F12    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        |        |        |        |        |        |        |        | P7     | P8     | P9     | -      | RGB_TOG| RGB_MOD| RGB_HUI|
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        | PREV   | PLAY   | NEXT   | STOP   |        |        |        | P4     | P5     | P6     | +      | RGB_SAI| RGB_SAD| RGB_VAI|
+ * |--------+--------+--------+--------+--------+--------+        +        +--------+--------+--------+--------+--------+--------+--------|
+ * |        | VOL-   | MUTE   | VOL+   |        |        |        |        | P1     | P2     | P3     | ENT    | RGB_VAD| Home   | RGB_HUD|
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | RESET  |        | FN     |        |                 |                 | P0              | .      | FN     |        | End    |        |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */
+ 
+ [_FN] = { /* FUNCTION */
+  { KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_SLSH, KC_ASTR, KC_F9,   KC_F10,  KC_F11,  KC_F12  },
+  { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P7,   KC_P8,   KC_P9,   KC_MINS, RGB_TOG, RGB_MOD, RGB_HUI },
+  { KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_MSTP, KC_TRNS, KC_TRNS, KC_TRNS, KC_P4,   KC_P5,   KC_P6,   KC_PLUS, RGB_SAI, RGB_SAD, RGB_VAI },
+  { KC_TRNS, KC_VOLD, KC_MUTE, KC_VOLU, KC_APP,  KC_TRNS, KC_TRNS, KC_TRNS, KC_P1,   KC_P2,   KC_P3,   KC_ENT,  RGB_VAD, KC_HOME, RGB_HUD },
+  { RESET,   KC_TRNS, MO(_FN), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_KP_0, KC_TRNS, KC_PDOT, MO(_FN), KC_TRNS, KC_END,  KC_TRNS },
+ }
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+            #ifdef BACKLIGHT_ENABLE
+              backlight_step();
+            #endif
+          } else {
+            unregister_code(KC_RSFT);
+          }
+        break;
+      }
+    return MACRO_NONE;
+};

keyboards/xd75/keymaps/c4software_bepo/rules.mk

@@ -0,0 +1,18 @@
+# Copyright 2013 Jun Wako <wakojun@gmail.com>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/xd75/keymaps/kloki/keymap.c

@@ -20,14 +20,15 @@
 #define _QW 1
 #define _NUM 2
 #define _SYM 3
+#define _FUN 4
 
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 
  [_WO] = { /* WORKMAN */
-  { KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,   KC_5,   KC_LSFT, TG(_NUM),TG(_QW),KC_6,    KC_7,   KC_8,    KC_9,    KC_0,    KC_BSPC },
-  { KC_TAB,  KC_Q,    KC_D,    KC_R,    KC_W,   KC_B,   KC_GRV,  KC_LGUI, KC_QUOT, KC_J,   KC_F,   KC_U,    KC_P,    KC_SCLN, KC_QUOT },
+  { KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,   KC_5,   MO(_FUN),TG(_NUM),TG(_QW),KC_6,    KC_7,   KC_8,    KC_9,    KC_0,    KC_BSPC },
+  { KC_TAB,  KC_Q,    KC_D,    KC_R,    KC_W,   KC_B,   KC_GRV,  KC_LGUI, KC_QUOT, KC_J,   KC_F,   KC_U,    KC_P,    KC_SCLN, KC_BSLS },
   { CTL_T(KC_ESC),KC_A,KC_S,   KC_H,    KC_T,   KC_G,   KC_EQL,  KC_UP,   KC_MINS, KC_Y,   KC_N,   KC_E,    KC_O,    KC_I,    KC_ENT  },
   { KC_LSFT, KC_Z,    KC_X,    KC_M,    KC_C,   KC_V,   KC_LEFT, KC_DOWN, KC_RGHT, KC_K,   KC_L,   KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT },
   { KC_MEH,KC_LGUI,KC_LALT,KC_LEFT,KC_RGHT,LT(_SYM,KC_SPC),LGUI_T(KC_ENT),KC_SPC,LT(_SYM,KC_TAB),KC_BSPC,KC_DOWN,KC_UP,KC_LBRC,KC_RBRC,MO(_SYM)},
@@ -49,11 +50,18 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   { _______,  _______, _______, _______, _______,_______,_______, KC_0, _______, _______,_______,_______, _______, _______, _______ },
  },
  [_SYM] = { /* SYM */
-  { _______,  KC_F1,   KC_F2,   KC_F3,   KC_F4,  KC_F5,  _______, KC_F11,  KC_F12,  KC_F6,  KC_F7,  KC_F8,   KC_F9,   KC_F10,  KC_DEL, },
-  { _______,  KC_EXLM, KC_AT,   KC_LCBR, KC_RCBR,KC_ASTR,_______, _______, _______, KC_LABK,KC_HOME,KC_UP,   KC_PGUP, KC_ASTR, _______ },
+  { _______,  KC_F1,   KC_F2,   KC_F3,   KC_F4,  KC_F5,  _______, _______, _______, KC_F6,  KC_F7,  KC_F8,   KC_F9,   KC_F10,  KC_DEL, },
+  { _______,  KC_EXLM, KC_AT,   KC_LCBR, KC_RCBR,KC_ASTR,_______, KC_F11,  KC_F12,  KC_LABK,KC_HOME,KC_UP,   KC_PGUP, KC_ASTR, _______ },
   { _______,  KC_HASH, KC_DLR,  KC_LPRN, KC_RPRN,KC_GRV, _______, _______, _______, KC_RABK,KC_LEFT,KC_DOWN, KC_RIGHT,KC_PLUS, _______ },
   { _______,  KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC,KC_TILD,_______, _______, _______, KC_AMPR,KC_END, KC_DOWN, KC_PGDN, KC_BSLS, _______ },
   { _______,  _______, _______, _______, _______,_______,_______, _______, _______, _______,_______,_______, _______, _______, _______ },
+ },
+ [_FUN] = { /* FUN */
+  { _______,  RGB_RMOD,RGB_MOD, RGB_TOG, _______,_______,_______, _______, _______, _______,_______,_______, _______, _______, RESET   },
+  { _______,  RGB_HUD, RGB_HUI, RGB_MODE_PLAIN, _______,_______,_______, _______, _______, _______,_______,_______, _______, _______, _______ },
+  { _______,  RGB_SAD, RGB_SAI, _______, _______,_______,_______, _______, _______, _______,_______,_______, _______, _______, _______ },
+  { _______,  RGB_VAD, RGB_VAI, _______, _______,_______,_______, _______, _______, _______,_______,_______, _______, _______, _______ },
+  { _______,  _______, _______, _______, _______,_______,_______, _______, _______, _______,_______,_______, _______, _______, _______ },
  }
 };
 const uint16_t PROGMEM fn_actions[] = {
@@ -77,3 +85,85 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
       }
     return MACRO_NONE;
 };
+
+bool CTRLDOWN = false;
+bool WINDOWN = false;
+bool SHIFTDOWN = false;
+void matrix_scan_user(void) {
+
+    uint8_t layer = biton32(layer_state);
+
+    switch (layer) {
+        case 0:
+            rgblight_setrgb(0,240, 255);
+            break;
+        case 1:
+            rgblight_setrgb(0,255, 100);
+            break;
+        case 2:
+            rgblight_setrgb(10,255, 0);
+            break;
+        case 3:
+            rgblight_setrgb(255,0, 85);
+            break;
+        case 4:
+            rgblight_setrgb(240,255, 0);
+            break;
+        default:
+            // none
+            break;
+    }
+    if ( SHIFTDOWN) {
+        rgblight_setrgb(255,255, 255);
+        }
+    if ( CTRLDOWN) {
+        rgblight_setrgb(240,255, 0);
+        }
+    if ( WINDOWN) {
+        rgblight_setrgb(255,255, 255);
+        }
+
+
+
+};
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case KC_LGUI:
+      if (record->event.pressed) {
+        WINDOWN = true;
+        } else {
+        WINDOWN = false;
+      }
+      return true;
+    case LGUI_T(KC_ENT):
+      if (record->event.pressed) {
+        WINDOWN = true;
+        } else {
+        WINDOWN = false;
+      }
+      return true;
+    case CTL_T(KC_ESC):
+      if (record->event.pressed) {
+        CTRLDOWN = true;
+        } else {
+        CTRLDOWN = false;
+      }
+      return true;
+    case KC_LSFT:
+      if (record->event.pressed) {
+        SHIFTDOWN = true;
+        } else {
+        SHIFTDOWN = false;
+      }
+      return true;
+    case KC_RSFT:
+      if (record->event.pressed) {
+        SHIFTDOWN = true;
+        } else {
+        SHIFTDOWN = false;
+      }
+      return true;
+    default:
+      return true; // Process all other keycodes normally
+  }
+};

keyboards/ymdk_np21/README.md

@@ -0,0 +1,17 @@
+# YMDK NP21
+
+![kp21 — full grid layout](https://ae01.alicdn.com/kf/HTB1d.txfHsTMeJjSszhq6AGCFXaF.jpg?size=35021&height=662&width=1000&hash=62b3a453686e2154dc51a7af67495e28)
+
+ps2avrGB based number-pad sold fully assembled by YMDK on Aliexpress.
+
+Keyboard Maintainer: [QMK Community](https://github.com/qmk)  
+Hardware Supported: Atmega32A
+Hardware Availability: [AliExpress](https://www.aliexpress.com/item/21-Key-NPKC-Programmable-Cherry-MX-Kailh-Gateron-Switches-Mechanical-Keyboard-Numpad-Free-shipping/32812732361.html)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make ymdk_np21:default:program
+
+Plugging the board in while pressing 'Top Left Key' (USB on top) will force it to boot bootloader without loading the firmware.
+
+The code for NP21 is a minor edit of jj40.

keyboards/ymdk_np21/backlight.c

@@ -0,0 +1,212 @@
+/**
+ * Backlighting code for PS2AVRGB boards (ATMEGA32A)
+ * Kenneth A. (github.com/krusli | krusli.me)
+ */
+
+#include "backlight.h"
+#include "quantum.h"
+
+#include <avr/pgmspace.h>
+#include <avr/interrupt.h>
+
+#include "backlight_custom.h"
+#include "breathing_custom.h"
+
+// DEBUG
+#include <stdlib.h>
+#include <stdio.h>
+
+// Port D: digital pins of the AVR chipset
+#define NUMLOCK_PORT    (1 << 1)  // 1st pin of Port D (digital)
+#define CAPSLOCK_PORT   (1 << 2)  // 2nd pin
+#define BACKLIGHT_PORT  (1 << 4)  // 4th pin
+#define SCROLLLOCK_PORT (1 << 6)  // 6th pin
+
+#define TIMER_CLK_DIV64			  0x03	///< Timer clocked at F_CPU/64
+#define TIMER1PRESCALE	TIMER_CLK_DIV64 ///< timer 1 prescaler default
+
+#define TIMER_PRESCALE_MASK		0x07	///< Timer Prescaler Bit-Mask
+
+#define PWM_MAX 0xFF
+#define TIMER_TOP 255 // 8 bit PWM
+
+extern backlight_config_t backlight_config;
+
+/**
+ * References
+ * Port Registers: https://www.arduino.cc/en/Reference/PortManipulation
+ * TCCR1A: https://electronics.stackexchange.com/questions/92350/what-is-the-difference-between-tccr1a-and-tccr1b
+ * Timers: http://www.avrbeginners.net/architecture/timers/timers.html
+ * 16-bit timer setup: http://sculland.com/ATmega168/Interrupts-And-Timers/16-Bit-Timer-Setup/
+ * PS2AVRGB firmware: https://github.com/showjean/ps2avrU/tree/master/firmware
+ */
+
+// @Override
+// turn LEDs on and off depending on USB caps/num/scroll lock states.
+void led_set_user(uint8_t usb_led) {
+    if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+      // turn on
+      DDRD  |= NUMLOCK_PORT;
+      PORTD |= NUMLOCK_PORT;
+    } else {
+      // turn off
+      DDRD  &= ~NUMLOCK_PORT;
+      PORTD &= ~NUMLOCK_PORT;
+    }
+
+    if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+      DDRD  |= CAPSLOCK_PORT;
+      PORTD |= CAPSLOCK_PORT;
+    } else {
+      DDRD  &= ~CAPSLOCK_PORT;
+      PORTD &= ~CAPSLOCK_PORT;
+    }
+
+    if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+      DDRD  |= SCROLLLOCK_PORT;
+      PORTD |= SCROLLLOCK_PORT;
+    } else {
+      DDRD  &= ~SCROLLLOCK_PORT;
+      PORTD &= ~SCROLLLOCK_PORT;
+    }
+}
+
+#ifdef BACKLIGHT_ENABLE
+
+// sets up Timer 1 for 8-bit PWM
+void timer1PWMSetup(void) { // NOTE ONLY CALL THIS ONCE
+  // default 8 bit mode
+  TCCR1A &= ~(1 << 1); // cbi(TCCR1A,PWM11); <- set PWM11 bit to HIGH
+  TCCR1A |= (1 << 0);  // sbi(TCCR1A,PWM10); <- set PWM10 bit to LOW
+
+  // clear output compare value A
+  // outb(OCR1AH, 0);
+  // outb(OCR1AL, 0);
+
+  // clear output comparator registers for B
+	OCR1BH = 0; // outb(OCR1BH, 0);
+	OCR1BL = 0; // outb(OCR1BL, 0);
+}
+
+bool is_init = false;
+void timer1Init(void) {
+  // timer1SetPrescaler(TIMER1PRESCALE)
+  // set to DIV/64
+  (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | TIMER1PRESCALE;
+
+  // reset TCNT1
+  TCNT1H = 0;  // outb(TCNT1H, 0);
+	TCNT1L = 0;  // outb(TCNT1L, 0);
+
+  // TOIE1: Timer Overflow Interrupt Enable (Timer 1);
+	TIMSK |= _BV(TOIE1); // sbi(TIMSK, TOIE1);
+
+  is_init = true;
+}
+
+void timer1UnInit(void) {
+  // set prescaler back to NONE
+  (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | 0x00;  // TIMERRTC_CLK_STOP
+
+  // disable timer overflow interrupt
+  TIMSK &= ~_BV(TOIE1); // overflow bit?
+
+  setPWM(0);
+
+  is_init = false;
+}
+
+
+// handle TCNT1 overflow
+//! Interrupt handler for tcnt1 overflow interrupt
+ISR(TIMER1_OVF_vect, ISR_NOBLOCK)
+{
+	// sei();
+  // handle breathing here
+  #ifdef BACKLIGHT_BREATHING
+  if (is_breathing()) {
+    custom_breathing_handler();
+  }
+  #endif
+
+  // TODO call user defined function
+}
+
+// enable timer 1 PWM
+// timer1PWMBOn()
+void timer1PWMBEnable(void) {
+  // turn on channel B (OC1B) PWM output
+  // set OC1B as non-inverted PWM
+  TCCR1A |= _BV(COM1B1);
+  TCCR1A &= ~_BV(COM1B0);
+}
+
+// disable timer 1 PWM
+// timer1PWMBOff()
+void timer1PWMBDisable(void) {
+  TCCR1A &= ~_BV(COM1B1);
+  TCCR1A &= ~_BV(COM1B0);
+}
+
+void enableBacklight(void) {
+  DDRD  |= BACKLIGHT_PORT;  // set digital pin 4 as output
+  PORTD |= BACKLIGHT_PORT;  // set digital pin 4 to high
+}
+
+void disableBacklight(void) {
+  // DDRD  &= ~BACKLIGHT_PORT;  // set digital pin 4 as input
+  PORTD &= ~BACKLIGHT_PORT;  // set digital pin 4 to low
+}
+
+void startPWM(void) {
+  timer1Init();
+  timer1PWMBEnable();
+  enableBacklight();
+}
+
+void stopPWM(void) {
+  timer1UnInit();
+  disableBacklight();
+  timer1PWMBDisable();
+}
+
+void b_led_init_ports(void) {
+  /* turn backlight on/off depending on user preference */
+  #if BACKLIGHT_ON_STATE == 0
+    // DDRx register: sets the direction of Port D
+    // DDRD  &= ~BACKLIGHT_PORT;  // set digital pin 4 as input
+    PORTD &= ~BACKLIGHT_PORT;  // set digital pin 4 to low
+  #else
+    DDRD  |= BACKLIGHT_PORT;  // set digital pin 4 as output
+    PORTD |= BACKLIGHT_PORT;  // set digital pin 4 to high
+  #endif
+
+  timer1PWMSetup();
+  startPWM();
+
+  #ifdef BACKLIGHT_BREATHING
+  breathing_enable();
+  #endif
+}
+
+void b_led_set(uint8_t level) {
+  if (level > BACKLIGHT_LEVELS) {
+    level = BACKLIGHT_LEVELS;
+  }
+
+  setPWM((int)(TIMER_TOP * (float) level / BACKLIGHT_LEVELS));
+}
+
+// called every matrix scan
+void b_led_task(void) {
+  // do nothing for now
+}
+
+void setPWM(uint16_t xValue) {
+  if (xValue > TIMER_TOP) {
+    xValue = TIMER_TOP;
+  }
+  OCR1B = xValue; // timer1PWMBSet(xValue);
+}
+
+#endif  // BACKLIGHT_ENABLE

keyboards/ymdk_np21/backlight_custom.h

@@ -0,0 +1,15 @@
+/**
+ * Backlighting code for PS2AVRGB boards (ATMEGA32A)
+ * Kenneth A. (github.com/krusli | krusli.me)
+ */
+
+#ifndef BACKLIGHT_CUSTOM_H
+#define BACKLIGHT_CUSTOM_H
+
+#include <avr/pgmspace.h>
+void b_led_init_ports(void);
+void b_led_set(uint8_t level);
+void b_led_task(void);
+void setPWM(uint16_t xValue);
+
+#endif  // BACKLIGHT_CUSTOM_H

keyboards/ymdk_np21/breathing_custom.h

@@ -0,0 +1,140 @@
+/**
+ * Breathing effect code for PS2AVRGB boards (ATMEGA32A)
+ * Works in conjunction with `backlight.c`.
+ *
+ * Code adapted from `quantum.c` to register with the existing TIMER1 overflow
+ * handler in `backlight.c` instead of setting up its own timer.
+ * Kenneth A. (github.com/krusli | krusli.me)
+ */
+
+#ifdef BACKLIGHT_ENABLE
+#ifdef BACKLIGHT_BREATHING
+
+#include "backlight_custom.h"
+
+#ifndef BREATHING_PERIOD
+#define BREATHING_PERIOD 6
+#endif
+
+#define breathing_min() do {breathing_counter = 0;} while (0)
+#define breathing_max() do {breathing_counter = breathing_period * 244 / 2;} while (0)
+
+// TODO make this share code with quantum.c
+
+#define BREATHING_NO_HALT  0
+#define BREATHING_HALT_OFF 1
+#define BREATHING_HALT_ON  2
+#define BREATHING_STEPS 128
+
+static uint8_t breathing_period = BREATHING_PERIOD;
+static uint8_t breathing_halt = BREATHING_NO_HALT;
+static uint16_t breathing_counter = 0;
+
+static bool breathing = false;
+
+bool is_breathing(void) {
+  return breathing;
+}
+
+// See http://jared.geek.nz/2013/feb/linear-led-pwm
+static uint16_t cie_lightness(uint16_t v) {
+  if (v <= 5243) // if below 8% of max
+    return v / 9; // same as dividing by 900%
+  else {
+    uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare
+    // to get a useful result with integer division, we shift left in the expression above
+    // and revert what we've done again after squaring.
+    y = y * y * y >> 8;
+    if (y > 0xFFFFUL) // prevent overflow
+      return 0xFFFFU;
+    else
+      return (uint16_t) y;
+  }
+}
+
+void breathing_enable(void) {
+  breathing = true;
+  breathing_counter = 0;
+  breathing_halt = BREATHING_NO_HALT;
+  // interrupt already registered
+}
+
+void breathing_pulse(void) {
+  if (get_backlight_level() == 0)
+    breathing_min();
+  else
+    breathing_max();
+  breathing_halt = BREATHING_HALT_ON;
+  // breathing_interrupt_enable();
+  breathing = true;
+}
+
+void breathing_disable(void) {
+  breathing = false;
+  // backlight_set(get_backlight_level());
+  b_led_set(get_backlight_level()); // custom implementation of backlight_set()
+}
+
+void breathing_self_disable(void)
+{
+  if (get_backlight_level() == 0)
+    breathing_halt = BREATHING_HALT_OFF;
+  else
+    breathing_halt = BREATHING_HALT_ON;
+}
+
+void breathing_toggle(void) {
+  if (is_breathing())
+    breathing_disable();
+  else
+    breathing_enable();
+}
+
+void breathing_period_set(uint8_t value)
+{
+  if (!value)
+    value = 1;
+  breathing_period = value;
+}
+
+void breathing_period_default(void) {
+  breathing_period_set(BREATHING_PERIOD);
+}
+
+void breathing_period_inc(void)
+{
+  breathing_period_set(breathing_period+1);
+}
+
+void breathing_period_dec(void)
+{
+  breathing_period_set(breathing_period-1);
+}
+
+/* To generate breathing curve in python:
+ * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)]
+ */
+static const uint8_t breathing_table[BREATHING_STEPS] PROGMEM = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+
+// Use this before the cie_lightness function.
+static inline uint16_t scale_backlight(uint16_t v) {
+  return v / BACKLIGHT_LEVELS * get_backlight_level();
+}
+
+void custom_breathing_handler(void) {
+  uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS;
+  // resetting after one period to prevent ugly reset at overflow.
+  breathing_counter = (breathing_counter + 1) % (breathing_period * 244);
+  uint8_t index = breathing_counter / interval % BREATHING_STEPS;
+
+  if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) ||
+      ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1)))
+  {
+      // breathing_interrupt_disable();
+  }
+
+  setPWM(cie_lightness(scale_backlight((uint16_t) pgm_read_byte(&breathing_table[index]) * 0x0101U)));
+}
+
+#endif // BACKLIGHT_BREATHING
+#endif  // BACKLIGHT_ENABLE

keyboards/ymdk_np21/config.h

@@ -0,0 +1,54 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config_common.h"
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#define VENDOR_ID       0x20A0
+#define PRODUCT_ID      0x422D
+// TODO: share these strings with usbconfig.h
+// Edit usbconfig.h to change these.
+#define MANUFACTURER    ymdk
+#define PRODUCT         np21
+
+/* matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 15
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_LEVELS 12
+// #define BACKLIGHT_BREATHING  // works, but BL_TOGG might not work
+
+#define TAPPING_TOGGLE 3
+
+#define NO_UART 1
+
+/* RGB underglow */
+// The RGB_DI_PIN value seems to be shared between all PS2AVRGB boards.
+// The same pin is used on the JJ40, at least.
+#define RGBLED_NUM 5
+#define RGB_DI_PIN E2 // NOTE: for PS2AVRGB boards, underglow commands are sent via I2C to 0xB0.
+#define RGBLIGHT_ANIMATIONS
+
+/* key combination for command */
+#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+#endif

keyboards/ymdk_np21/i2c.c

@@ -0,0 +1,104 @@
+/*
+Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/io.h>
+#include <util/twi.h>
+
+#include "i2c.h"
+
+void i2c_set_bitrate(uint16_t bitrate_khz) {
+    uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
+    if (bitrate_div >= 16) {
+        bitrate_div = (bitrate_div - 16) / 2;
+    }
+    TWBR = bitrate_div;
+}
+
+void i2c_init(void) {
+    // set pull-up resistors on I2C bus pins
+    PORTC |= 0b11;
+
+    i2c_set_bitrate(400);
+
+    // enable TWI (two-wire interface)
+    TWCR |= (1 << TWEN);
+
+    // enable TWI interrupt and slave address ACK
+    TWCR |= (1 << TWIE);
+    TWCR |= (1 << TWEA);
+}
+
+uint8_t i2c_start(uint8_t address) {
+    // reset TWI control register
+    TWCR = 0;
+
+    // begin transmission and wait for it to end
+    TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
+    while (!(TWCR & (1<<TWINT)));
+
+    // check if the start condition was successfully transmitted
+    if ((TWSR & 0xF8) != TW_START) {
+        return 1;
+    }
+
+    // transmit address and wait
+    TWDR = address;
+    TWCR = (1<<TWINT) | (1<<TWEN);
+    while (!(TWCR & (1<<TWINT)));
+
+    // check if the device has acknowledged the READ / WRITE mode
+    uint8_t twst = TW_STATUS & 0xF8;
+    if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
+        return 1;
+    }
+
+    return 0;
+}
+
+void i2c_stop(void) {
+    TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+}
+
+uint8_t i2c_write(uint8_t data) {
+    TWDR = data;
+
+    // transmit data and wait
+    TWCR = (1<<TWINT) | (1<<TWEN);
+    while (!(TWCR & (1<<TWINT)));
+
+    if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
+        return 1;
+    }
+
+    return 0;
+}
+
+uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
+    if (i2c_start(address)) {
+        return 1;
+    }
+
+    for (uint16_t i = 0; i < length; i++) {
+        if (i2c_write(data[i])) {
+            return 1;
+        }
+    }
+
+    i2c_stop();
+
+    return 0;
+}

keyboards/ymdk_np21/i2c.h

@@ -0,0 +1,25 @@
+/*
+Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef __I2C_H__
+#define __I2C_H__
+
+void i2c_init(void);
+void i2c_set_bitrate(uint16_t bitrate_khz);
+uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
+
+#endif

keyboards/ymdk_np21/keymaps/default/keymap.c

@@ -0,0 +1,47 @@
+#include "ymdk_np21.h"
+#include "action_layer.h"
+
+#define _NP 0
+#define _BL  1
+
+enum custom_keycodes {
+  NP = SAFE_RANGE,
+  BL
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Qwerty
+ * ,-----------------------------------------.
+ * |   0  |   1  |   4  |   7  | NUM  | ESC  |
+ * |------+------+------+------+------+------|
+ * |   .  |   2  |   5  |   8  |   /  | TAB  |---,
+ * |------+------+------+------+------+------|USB|
+ * |  DOT |   3  |   6  |   9  |   *  | BS   |---'
+ * |------+------+------+------+------+------|
+ * | Enter| Enter|   +  |   +  |   -  | FN   |
+ * `-----------------------------------------'
+ */
+[_NP] = KEYMAP( \
+  KC_KP_0,     KC_KP_1,     KC_KP_4,    KC_KP_7,    KC_NUMLOCK,     KC_ESC,    \
+  KC_DOT,      KC_KP_2,     KC_KP_5,    KC_KP_8,    KC_KP_SLASH,    KC_TAB,    \
+  KC_KP_DOT,   KC_KP_3,     KC_KP_6,    KC_KP_9,    KC_KP_ASTERISK, KC_BSPACE, \
+  KC_KP_ENTER, KC_KP_ENTER, KC_KP_PLUS, KC_KP_PLUS, KC_KP_MINUS,    MO(_BL)     \
+),
+/* Qwerty
+ * ,---------------------------------------------.
+ * | BL_BRTG |        |         |        |   |   |
+ * |---------+--------+---------+--------+---+---|
+ * |         | BL_OFF | BL_TOGG | BL_ON  |   |   |---,
+ * |---------+--------+---------+--------+---+---|USB|
+ * |         |        |         |        |   |   |---'
+ * |---------+--------+---------+--------+---+---|
+ * | BL_DEC  | BL_DEC | BL_INC  | BL_INC |   |   |
+ * `---------------------------------------------'
+ */
+[_BL] = KEYMAP( \
+  BL_BRTG, _______, _______, _______, _______, _______, \
+  _______, BL_OFF,  BL_TOGG, BL_ON,   _______, _______, \
+  _______, _______, _______, _______, _______, _______, \
+  BL_DEC,  BL_DEC,  BL_INC,  BL_INC,  _______, _______  \
+)
+};

keyboards/ymdk_np21/matrix.c

@@ -0,0 +1,118 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/io.h>
+#include <util/delay.h>
+
+#include "matrix.h"
+
+#ifndef DEBOUNCE
+#   define DEBOUNCE	5
+#endif
+
+static uint8_t debouncing = DEBOUNCE;
+
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+void matrix_set_row_status(uint8_t row);
+uint8_t bit_reverse(uint8_t x);
+
+void matrix_init(void) {
+    // all outputs for rows high
+    DDRB = 0xFF;
+    PORTB = 0xFF;
+    // all inputs for columns
+    DDRA = 0x00;
+    DDRC &= ~(0x111111<<2);
+    DDRD &= ~(1<<PIND7);
+    // all columns are pulled-up
+    PORTA = 0xFF;
+    PORTC |= (0b111111<<2);
+    PORTD |= (1<<PIND7);
+
+    // initialize matrix state: all keys off
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        matrix[row] = 0x00;
+        matrix_debouncing[row] = 0x00;
+    }
+
+    matrix_init_quantum();  // missing from original port by Luiz
+}
+
+uint8_t matrix_scan(void) {
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        matrix_set_row_status(row);
+        _delay_us(5);
+
+        matrix_row_t cols = (
+            // cols 0..7, PORTA 0 -> 7
+            (~PINA) & 0xFF
+        ) | (
+            // cols 8..13, PORTC 7 -> 0
+            bit_reverse((~PINC) & 0xFF) << 8
+        ) | (
+            // col 14, PORTD 7
+            ((~PIND) & (1 << PIND7)) << 7
+        );
+
+        if (matrix_debouncing[row] != cols) {
+            matrix_debouncing[row] = cols;
+            debouncing = DEBOUNCE;
+        }
+    }
+
+    if (debouncing) {
+        if (--debouncing) {
+            _delay_ms(1);
+        } else {
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+                matrix[i] = matrix_debouncing[i];
+            }
+        }
+    }
+
+    matrix_scan_quantum();  // also missing in original PS2AVRGB implementation
+
+    return 1;
+}
+
+void matrix_scan_kb(void) {
+  // Looping keyboard code goes here
+  // This runs every cycle (a lot)
+  matrix_scan_user();
+};
+
+// declarations
+void matrix_set_row_status(uint8_t row) {
+    DDRB = (1 << row);
+    PORTB = ~(1 << row);
+}
+
+uint8_t bit_reverse(uint8_t x) {
+    x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa);
+    x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc);
+    x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0);
+    return x;
+}
+
+inline matrix_row_t matrix_get_row(uint8_t row) {
+    return matrix[row];
+}
+
+void matrix_print(void) {
+}

keyboards/ymdk_np21/rules.mk

@@ -0,0 +1,59 @@
+# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# MCU name
+MCU = atmega32a
+PROTOCOL = VUSB
+
+# unsupported features for now
+NO_UART = yes
+NO_SUSPEND_POWER_DOWN = yes
+
+# processor frequency
+F_CPU = 12000000
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = bootloadHID
+
+# build options
+BOOTMAGIC_ENABLE = no
+MOUSEKEY_ENABLE = no
+EXTRAKEY_ENABLE = yes
+CONSOLE_ENABLE = no
+COMMAND_ENABLE = yes
+
+BACKLIGHT_ENABLE = yes
+BACKLIGHT_CUSTOM_DRIVER = yes
+
+RGBLIGHT_ENABLE = yes
+RGBLIGHT_CUSTOM_DRIVER = yes
+# DISABLE_WS2812 = no
+
+KEY_LOCK_ENABLE = yes
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+OPT_DEFS = -DDEBUG_LEVEL=0
+
+# custom matrix setup
+CUSTOM_MATRIX = yes
+SRC = matrix.c i2c.c backlight.c
+
+# programming options
+PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex

keyboards/ymdk_np21/usbconfig.h

@@ -0,0 +1,397 @@
+/* Name: usbconfig.h
+ * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
+ * Author: Christian Starkjohann
+ * Creation Date: 2005-04-01
+ * Tabsize: 4
+ * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
+ * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
+ * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
+ */
+
+#ifndef __usbconfig_h_included__
+#define __usbconfig_h_included__
+
+#include "config.h"
+
+/*
+General Description:
+This file is an example configuration (with inline documentation) for the USB
+driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
+also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
+wire the lines to any other port, as long as D+ is also wired to INT0 (or any
+other hardware interrupt, as long as it is the highest level interrupt, see
+section at the end of this file).
+*/
+
+/* ---------------------------- Hardware Config ---------------------------- */
+
+#define USB_CFG_IOPORTNAME      D
+/* This is the port where the USB bus is connected. When you configure it to
+ * "B", the registers PORTB, PINB and DDRB will be used.
+ */
+#define USB_CFG_DMINUS_BIT      3
+/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
+ * This may be any bit in the port.
+ */
+#define USB_CFG_DPLUS_BIT       2
+/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
+ * This may be any bit in the port. Please note that D+ must also be connected
+ * to interrupt pin INT0! [You can also use other interrupts, see section
+ * "Optional MCU Description" below, or you can connect D- to the interrupt, as
+ * it is required if you use the USB_COUNT_SOF feature. If you use D- for the
+ * interrupt, the USB interrupt will also be triggered at Start-Of-Frame
+ * markers every millisecond.]
+ */
+#define USB_CFG_CLOCK_KHZ       (F_CPU/1000)
+/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
+ * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
+ * require no crystal, they tolerate +/- 1% deviation from the nominal
+ * frequency. All other rates require a precision of 2000 ppm and thus a
+ * crystal!
+ * Since F_CPU should be defined to your actual clock rate anyway, you should
+ * not need to modify this setting.
+ */
+#define USB_CFG_CHECK_CRC       0
+/* Define this to 1 if you want that the driver checks integrity of incoming
+ * data packets (CRC checks). CRC checks cost quite a bit of code size and are
+ * currently only available for 18 MHz crystal clock. You must choose
+ * USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
+ */
+
+/* ----------------------- Optional Hardware Config ------------------------ */
+
+/* #define USB_CFG_PULLUP_IOPORTNAME   D */
+/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
+ * V+, you can connect and disconnect the device from firmware by calling
+ * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
+ * This constant defines the port on which the pullup resistor is connected.
+ */
+/* #define USB_CFG_PULLUP_BIT          4 */
+/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
+ * above) where the 1.5k pullup resistor is connected. See description
+ * above for details.
+ */
+
+/* --------------------------- Functional Range ---------------------------- */
+
+#define USB_CFG_HAVE_INTRIN_ENDPOINT    1
+/* Define this to 1 if you want to compile a version with two endpoints: The
+ * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
+ * number).
+ */
+#define USB_CFG_HAVE_INTRIN_ENDPOINT3   1
+/* Define this to 1 if you want to compile a version with three endpoints: The
+ * default control endpoint 0, an interrupt-in endpoint 3 (or the number
+ * configured below) and a catch-all default interrupt-in endpoint as above.
+ * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
+ */
+#define USB_CFG_EP3_NUMBER              3
+/* If the so-called endpoint 3 is used, it can now be configured to any other
+ * endpoint number (except 0) with this macro. Default if undefined is 3.
+ */
+/* #define USB_INITIAL_DATATOKEN           USBPID_DATA1 */
+/* The above macro defines the startup condition for data toggling on the
+ * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
+ * Since the token is toggled BEFORE sending any data, the first packet is
+ * sent with the oposite value of this configuration!
+ */
+#define USB_CFG_IMPLEMENT_HALT          0
+/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
+ * for endpoint 1 (interrupt endpoint). Although you may not need this feature,
+ * it is required by the standard. We have made it a config option because it
+ * bloats the code considerably.
+ */
+#define USB_CFG_SUPPRESS_INTR_CODE      0
+/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
+ * want to send any data over them. If this macro is defined to 1, functions
+ * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
+ * you need the interrupt-in endpoints in order to comply to an interface
+ * (e.g. HID), but never want to send any data. This option saves a couple
+ * of bytes in flash memory and the transmit buffers in RAM.
+ */
+#define USB_CFG_INTR_POLL_INTERVAL      1
+/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
+ * interval. The value is in milliseconds and must not be less than 10 ms for
+ * low speed devices.
+ */
+#define USB_CFG_IS_SELF_POWERED         0
+/* Define this to 1 if the device has its own power supply. Set it to 0 if the
+ * device is powered from the USB bus.
+ */
+// max power draw with maxed white underglow measured at 120 mA (peaks)
+#define USB_CFG_MAX_BUS_POWER           100
+/* Set this variable to the maximum USB bus power consumption of your device.
+ * The value is in milliamperes. [It will be divided by two since USB
+ * communicates power requirements in units of 2 mA.]
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITE      1
+/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
+ * transfers. Set it to 0 if you don't need it and want to save a couple of
+ * bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_READ       0
+/* Set this to 1 if you need to send control replies which are generated
+ * "on the fly" when usbFunctionRead() is called. If you only want to send
+ * data from a static buffer, set it to 0 and return the data from
+ * usbFunctionSetup(). This saves a couple of bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITEOUT   0
+/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
+ * You must implement the function usbFunctionWriteOut() which receives all
+ * interrupt/bulk data sent to any endpoint other than 0. The endpoint number
+ * can be found in 'usbRxToken'.
+ */
+#define USB_CFG_HAVE_FLOWCONTROL        0
+/* Define this to 1 if you want flowcontrol over USB data. See the definition
+ * of the macros usbDisableAllRequests() and usbEnableAllRequests() in
+ * usbdrv.h.
+ */
+#define USB_CFG_DRIVER_FLASH_PAGE       0
+/* If the device has more than 64 kBytes of flash, define this to the 64 k page
+ * where the driver's constants (descriptors) are located. Or in other words:
+ * Define this to 1 for boot loaders on the ATMega128.
+ */
+#define USB_CFG_LONG_TRANSFERS          0
+/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
+ * in a single control-in or control-out transfer. Note that the capability
+ * for long transfers increases the driver size.
+ */
+/* #define USB_RX_USER_HOOK(data, len)     if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
+/* This macro is a hook if you want to do unconventional things. If it is
+ * defined, it's inserted at the beginning of received message processing.
+ * If you eat the received message and don't want default processing to
+ * proceed, do a return after doing your things. One possible application
+ * (besides debugging) is to flash a status LED on each packet.
+ */
+/* #define USB_RESET_HOOK(resetStarts)     if(!resetStarts){hadUsbReset();} */
+/* This macro is a hook if you need to know when an USB RESET occurs. It has
+ * one parameter which distinguishes between the start of RESET state and its
+ * end.
+ */
+/* #define USB_SET_ADDRESS_HOOK()              hadAddressAssigned(); */
+/* This macro (if defined) is executed when a USB SET_ADDRESS request was
+ * received.
+ */
+#define USB_COUNT_SOF                   1
+/* define this macro to 1 if you need the global variable "usbSofCount" which
+ * counts SOF packets. This feature requires that the hardware interrupt is
+ * connected to D- instead of D+.
+ */
+/* #ifdef __ASSEMBLER__
+ * macro myAssemblerMacro
+ *     in      YL, TCNT0
+ *     sts     timer0Snapshot, YL
+ *     endm
+ * #endif
+ * #define USB_SOF_HOOK                    myAssemblerMacro
+ * This macro (if defined) is executed in the assembler module when a
+ * Start Of Frame condition is detected. It is recommended to define it to
+ * the name of an assembler macro which is defined here as well so that more
+ * than one assembler instruction can be used. The macro may use the register
+ * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
+ * immediately after an SOF pulse may be lost and must be retried by the host.
+ * What can you do with this hook? Since the SOF signal occurs exactly every
+ * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
+ * designs running on the internal RC oscillator.
+ * Please note that Start Of Frame detection works only if D- is wired to the
+ * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
+ */
+#define USB_CFG_CHECK_DATA_TOGGLING     0
+/* define this macro to 1 if you want to filter out duplicate data packets
+ * sent by the host. Duplicates occur only as a consequence of communication
+ * errors, when the host does not receive an ACK. Please note that you need to
+ * implement the filtering yourself in usbFunctionWriteOut() and
+ * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
+ * for each control- and out-endpoint to check for duplicate packets.
+ */
+#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH   0
+/* define this macro to 1 if you want the function usbMeasureFrameLength()
+ * compiled in. This function can be used to calibrate the AVR's RC oscillator.
+ */
+#define USB_USE_FAST_CRC                0
+/* The assembler module has two implementations for the CRC algorithm. One is
+ * faster, the other is smaller. This CRC routine is only used for transmitted
+ * messages where timing is not critical. The faster routine needs 31 cycles
+ * per byte while the smaller one needs 61 to 69 cycles. The faster routine
+ * may be worth the 32 bytes bigger code size if you transmit lots of data and
+ * run the AVR close to its limit.
+ */
+
+/* -------------------------- Device Description --------------------------- */
+
+#define USB_CFG_VENDOR_ID       (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
+/* USB vendor ID for the device, low byte first. If you have registered your
+ * own Vendor ID, define it here. Otherwise you may use one of obdev's free
+ * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_ID       (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
+/* This is the ID of the product, low byte first. It is interpreted in the
+ * scope of the vendor ID. If you have registered your own VID with usb.org
+ * or if you have licensed a PID from somebody else, define it here. Otherwise
+ * you may use one of obdev's free shared VID/PID pairs. See the file
+ * USB-IDs-for-free.txt for details!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_VERSION  0x00, 0x02
+/* Version number of the device: Minor number first, then major number.
+ */
+#define USB_CFG_VENDOR_NAME     'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
+#define USB_CFG_VENDOR_NAME_LEN 13
+/* These two values define the vendor name returned by the USB device. The name
+ * must be given as a list of characters under single quotes. The characters
+ * are interpreted as Unicode (UTF-16) entities.
+ * If you don't want a vendor name string, undefine these macros.
+ * ALWAYS define a vendor name containing your Internet domain name if you use
+ * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
+ * details.
+ */
+#define USB_CFG_DEVICE_NAME     'j', 'j', '4', '0'
+#define USB_CFG_DEVICE_NAME_LEN 4
+/* Same as above for the device name. If you don't want a device name, undefine
+ * the macros. See the file USB-IDs-for-free.txt before you assign a name if
+ * you use a shared VID/PID.
+ */
+/*#define USB_CFG_SERIAL_NUMBER   'N', 'o', 'n', 'e' */
+/*#define USB_CFG_SERIAL_NUMBER_LEN   0 */
+/* Same as above for the serial number. If you don't want a serial number,
+ * undefine the macros.
+ * It may be useful to provide the serial number through other means than at
+ * compile time. See the section about descriptor properties below for how
+ * to fine tune control over USB descriptors such as the string descriptor
+ * for the serial number.
+ */
+#define USB_CFG_DEVICE_CLASS        0
+#define USB_CFG_DEVICE_SUBCLASS     0
+/* See USB specification if you want to conform to an existing device class.
+ * Class 0xff is "vendor specific".
+ */
+#define USB_CFG_INTERFACE_CLASS     3   /* HID */
+#define USB_CFG_INTERFACE_SUBCLASS  1   /* Boot */
+#define USB_CFG_INTERFACE_PROTOCOL  1   /* Keyboard */
+/* See USB specification if you want to conform to an existing device class or
+ * protocol. The following classes must be set at interface level:
+ * HID class is 3, no subclass and protocol required (but may be useful!)
+ * CDC class is 2, use subclass 2 and protocol 1 for ACM
+ */
+#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH    0
+/* Define this to the length of the HID report descriptor, if you implement
+ * an HID device. Otherwise don't define it or define it to 0.
+ * If you use this define, you must add a PROGMEM character array named
+ * "usbHidReportDescriptor" to your code which contains the report descriptor.
+ * Don't forget to keep the array and this define in sync!
+ */
+
+/* #define USB_PUBLIC static */
+/* Use the define above if you #include usbdrv.c instead of linking against it.
+ * This technique saves a couple of bytes in flash memory.
+ */
+
+/* ------------------- Fine Control over USB Descriptors ------------------- */
+/* If you don't want to use the driver's default USB descriptors, you can
+ * provide our own. These can be provided as (1) fixed length static data in
+ * flash memory, (2) fixed length static data in RAM or (3) dynamically at
+ * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
+ * information about this function.
+ * Descriptor handling is configured through the descriptor's properties. If
+ * no properties are defined or if they are 0, the default descriptor is used.
+ * Possible properties are:
+ *   + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
+ *     at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
+ *     used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
+ *     you want RAM pointers.
+ *   + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
+ *     in static memory is in RAM, not in flash memory.
+ *   + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
+ *     the driver must know the descriptor's length. The descriptor itself is
+ *     found at the address of a well known identifier (see below).
+ * List of static descriptor names (must be declared PROGMEM if in flash):
+ *   char usbDescriptorDevice[];
+ *   char usbDescriptorConfiguration[];
+ *   char usbDescriptorHidReport[];
+ *   char usbDescriptorString0[];
+ *   int usbDescriptorStringVendor[];
+ *   int usbDescriptorStringDevice[];
+ *   int usbDescriptorStringSerialNumber[];
+ * Other descriptors can't be provided statically, they must be provided
+ * dynamically at runtime.
+ *
+ * Descriptor properties are or-ed or added together, e.g.:
+ * #define USB_CFG_DESCR_PROPS_DEVICE   (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
+ *
+ * The following descriptors are defined:
+ *   USB_CFG_DESCR_PROPS_DEVICE
+ *   USB_CFG_DESCR_PROPS_CONFIGURATION
+ *   USB_CFG_DESCR_PROPS_STRINGS
+ *   USB_CFG_DESCR_PROPS_STRING_0
+ *   USB_CFG_DESCR_PROPS_STRING_VENDOR
+ *   USB_CFG_DESCR_PROPS_STRING_PRODUCT
+ *   USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
+ *   USB_CFG_DESCR_PROPS_HID
+ *   USB_CFG_DESCR_PROPS_HID_REPORT
+ *   USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
+ *
+ * Note about string descriptors: String descriptors are not just strings, they
+ * are Unicode strings prefixed with a 2 byte header. Example:
+ * int  serialNumberDescriptor[] = {
+ *     USB_STRING_DESCRIPTOR_HEADER(6),
+ *     'S', 'e', 'r', 'i', 'a', 'l'
+ * };
+ */
+
+#define USB_CFG_DESCR_PROPS_DEVICE                  0
+#define USB_CFG_DESCR_PROPS_CONFIGURATION           USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_CONFIGURATION           0
+#define USB_CFG_DESCR_PROPS_STRINGS                 0
+#define USB_CFG_DESCR_PROPS_STRING_0                0
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR           0
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT          0
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER    0
+#define USB_CFG_DESCR_PROPS_HID                     USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID                     0
+#define USB_CFG_DESCR_PROPS_HID_REPORT              USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID_REPORT              0
+#define USB_CFG_DESCR_PROPS_UNKNOWN                 0
+
+#define usbMsgPtr_t unsigned short
+/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to
+ * a scalar type here because gcc generates slightly shorter code for scalar
+ * arithmetics than for pointer arithmetics. Remove this define for backward
+ * type compatibility or define it to an 8 bit type if you use data in RAM only
+ * and all RAM is below 256 bytes (tiny memory model in IAR CC).
+ */
+
+/* ----------------------- Optional MCU Description ------------------------ */
+
+/* The following configurations have working defaults in usbdrv.h. You
+ * usually don't need to set them explicitly. Only if you want to run
+ * the driver on a device which is not yet supported or with a compiler
+ * which is not fully supported (such as IAR C) or if you use a differnt
+ * interrupt than INT0, you may have to define some of these.
+ */
+/* #define USB_INTR_CFG            MCUCR */
+/* #define USB_INTR_CFG_SET        ((1 << ISC00) | (1 << ISC01)) */
+/* #define USB_INTR_CFG_CLR        0 */
+/* #define USB_INTR_ENABLE         GIMSK */
+/* #define USB_INTR_ENABLE_BIT     INT0 */
+/* #define USB_INTR_PENDING        GIFR */
+/* #define USB_INTR_PENDING_BIT    INTF0 */
+/* #define USB_INTR_VECTOR         INT0_vect */
+
+/* Set INT1 for D- falling edge to count SOF */
+/* #define USB_INTR_CFG            EICRA */
+#define USB_INTR_CFG_SET        ((1 << ISC11) | (0 << ISC10))
+/* #define USB_INTR_CFG_CLR        0 */
+/* #define USB_INTR_ENABLE         EIMSK */
+#define USB_INTR_ENABLE_BIT     INT1
+/* #define USB_INTR_PENDING        EIFR */
+#define USB_INTR_PENDING_BIT    INTF1
+#define USB_INTR_VECTOR         INT1_vect
+
+#endif /* __usbconfig_h_included__ */

keyboards/ymdk_np21/ymdk_np21.c

@@ -0,0 +1,80 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+Modified 2018 Kenneth A. <github.com/krusli>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "ymdk_np21.h"
+
+#include <avr/pgmspace.h>
+
+#include "action_layer.h"
+#include "quantum.h"
+
+#include "i2c.h"
+
+#include "backlight.h"
+#include "backlight_custom.h"
+
+extern rgblight_config_t rgblight_config;
+
+// for keyboard subdirectory level init functions
+// @Override
+void matrix_init_kb(void) {
+  // call user level keymaps, if any
+  // matrix_init_user();
+}
+
+#ifdef BACKLIGHT_ENABLE
+/// Overrides functions in `quantum.c`
+void backlight_init_ports(void) {
+  b_led_init_ports();
+}
+
+void backlight_task(void) {
+  b_led_task();
+}
+
+void backlight_set(uint8_t level) {
+  b_led_set(level);
+}
+#endif
+
+// custom RGB driver
+void rgblight_set(void) {
+  if (!rgblight_config.enable) {
+    for (uint8_t i=0; i<RGBLED_NUM; i++) {
+      led[i].r = 0;
+      led[i].g = 0;
+      led[i].b = 0;
+    }
+  }
+
+  i2c_init();
+  i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
+}
+
+bool rgb_init = false;
+void matrix_scan_user(void) {
+  // if LEDs were previously on before poweroff, turn them back on
+  if (rgb_init == false && rgblight_config.enable) {
+    i2c_init();
+    i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
+    rgb_init = true;
+  }
+
+  rgblight_task();
+  /* Nothing else for now. */
+}

keyboards/ymdk_np21/ymdk_np21.h

@@ -0,0 +1,43 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef KEYMAP_COMMON_H
+#define KEYMAP_COMMON_H
+
+#include "quantum.h"
+#include "quantum_keycodes.h"
+#include "keycode.h"
+#include "action.h"
+
+void matrix_init_user(void);  // TODO port this to other PS2AVRGB boards
+
+#define KEYMAP_GRID( \
+    K01, K02, K03, K04, K05, K06, \
+    K11, K12, K13, K14, K15, K16, \
+    K21, K22, K23, K24, K25, K26, \
+    K31, K32, K33, K34, K35, K36 \
+) \
+{ \
+  { K06, K05, K04, K03, K02, K01 }, \
+  { K16, K15, K14, K13, K12, K11 }, \
+  { K26, K25, K24, K23, K22, K21 }, \
+  { K36, K35, K34, K33, K32, K31 }  \
+}
+
+#define KEYMAP KEYMAP_GRID
+
+#endif

layouts/community/ergodox/zweihander-macos/keymap.c

@@ -16,9 +16,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
  * |   ⌦    |   Q  |   W  |   E  |   R  |   T  | ~L1  |           | ~L1  |   Y  |   U  |   I  |   O  |   P  |   \    |
  * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
- * |   ⌫    |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |; / L2| ' / L⌘ |
+ * |   ⌫    |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |; / L2| ' / R⌘ |
  * |--------+------+------+------+------+------|  L⌘  |           |  R⌘  |------+------+------+------+------+--------|
- * |  L⇧    |   Z  |   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ,  |   .  | / / ⌃|  R⇧    |
+ * |  L⇧    |   Z  |   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ,  |   .  | / /R⌥|  R⇧    |
  * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
  *   |  L⌃  |  L⌥  |  L⌘  |   ←  |   →  |                                       |   ↑  |   ↓  |   [  |   ]  |      |
  *   `----------------------------------'                                       `----------------------------------'
@@ -45,8 +45,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         // right hand
              TG(SYMB),  KC_6,   KC_7,   KC_8,   KC_9,   KC_0,             KC_MINS,
              MO(SYMB),  KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,             KC_BSLS,
-                        KC_H,   KC_J,   KC_K,   KC_L,   LT(MDIA, KC_SCLN),GUI_T(KC_QUOT),
-             KC_RGUI,   KC_N,   KC_M,   KC_COMM,KC_DOT, CTL_T(KC_SLSH),   KC_RSFT,
+                        KC_H,   KC_J,   KC_K,   KC_L,   LT(MDIA, KC_SCLN),RGUI_T(KC_QUOT),
+             KC_RGUI,   KC_N,   KC_M,   KC_COMM,KC_DOT, RALT_T(KC_SLSH),  KC_RSFT,
                                 KC_UP,  KC_DOWN,KC_LBRC,KC_RBRC,          KC_SPC ,
              KC_ESC,            KC_BSPC,
              KC_PGDN,

layouts/community/ergodox/zweihander-macos/readme.markdown

@@ -0,0 +1,73 @@
+# The Zweihander Layout
+
+NB: the backtick (\`) is special in Markdown. If I write ⌘\` in this readme, I mean “Command-backtick”, not “Command-backslash-backtick”.
+
+This README refers to two secondary layers: the Media Layer and the Symbol Layer. The Media Layer is accessed by holding ; (the semicolon) and has cursor-movement, window-management, and volume-adjustment keys on it. The Symbol Layer is accessed by holding either of the two tall keys between T and Y, or by tapping one of the small keys between 5 and 6. It has a 10-key keypad, parentheses and similar grouping punctuation, and F1–F12.
+
+This layout is tuned for people who…
+
+
+## use macOS
+
+While this layout works fine in Windows, it’s not tuned for it. No sane person who primarily uses Windows would put this many Windows keys on a keyboard layout. That said, Print Screen, Scroll Lock, and Pause are available in their usual order on the Media Layer if you need them.
+
+
+## mouse left-handed while doing other things with the right hand
+
+I tend to have my mouse in my left hand, but I like to use my other hand to make things go faster. I’ve added a bunch of buttons to the Media Layer (hold ;) to speed up browsing in applications like Safari and Finder:
+
+- ⌘[ — Back
+- ⌘] — Forward
+- ⌥⌘↓ — Open Selection and Close Parent Folder
+- ⌥⌘↑ — Go Up and Close Just-Left Folder
+
+I also have a few keys dedicated to window management:
+
+- ⌘W — Close Window
+- ⌘\` — Move Focus to Next Window
+- ⌘⇧\` — Move Focus to Previous Window
+
+Cut, Copy, and Paste (⌘X, ⌘C, and ⌘V) are also available on the three bottommost right-thumb buttons if you hold ;.
+
+
+## use lots of modifier keys in OS X menu-item shortcuts
+
+I wanted to preserve the feel of a number of shortcuts that involve pressing lots of modifier keys at once. This is why the bottom left of the keyboard has Shift, Control, Option, and Command in the usual spots. Further I’ve added affordances so some key combinations are easier to press with just the right hand.
+
+I also put a second Backspace (⌫) key on the right half of the keyboard to make some particularly commonly-used keyboard shortcuts faster and more convenient for right-handed use:
+
+- ⌘⌫ — Move to Trash / Delete
+- ⇧⌥⌘⌫ — Empty Trash Without Asking for Confirmation
+
+⇧⌥⌘⌫ is much more satisfying to press when you do it like on a normal keyboard: one left-hand finger on each of ⇧, ⌥, and ⌘, and the right index finger on ⌫.
+
+Pressing and holding / will give you Option. This makes a number of keyboard shortcuts easy to press with just the right hand:
+
+- ⌥↑ — Move Line Up
+- ⌥↓ — Move Line Down
+- ⌥⇧↑ — Copy Line Up / Go To Previous Channel With Unread Messages
+- ⌥⇧↓ — Copy Line Down / Go To Next Channel With Unread Messages
+
+
+## use Emacs-style shortcuts
+
+I press C-a, C-e, and C-k all the time. It’s difficult to press these key combinations with the Control key on the far left, so the leftmost thumb button on the right side is another Control key.
+
+Having trouble remembering which innermost thumb key is Alt and which is Control? The two’re like on the lower right of a normal keyboard — leftmost is Alt, rightmost is Control.
+
+
+## use spreadsheets
+
+All the common spreadsheet operations (+-*/=) are on the right side of the Symbol Layer. Make-numbers-bigger (+, \*) operations on the right; make-numbers-smaller (-, /) on the left. There’s also a colon there for entering times and maybe IPv6 addresses.
+
+
+## know the ↑↓←→ fn-key shortcuts for MacBooks
+
+Have you looked at the Page Up, Page Down, Home, and End keys on the EDSF keys and wondered why they’re arranged that way? They’re arranged the same way as the fn-key shortcuts on an Apple laptop’s arrow keys. On Apple keyboards with an\* fn key, if you press fn-↑, you’ll get Page Up; if you press fn-← you’ll get Home. Similarly, on Zweihander, ;-E is Page Up and ;-S is Home.
+
+
+## use Siri
+
+F16, accessed by holding ; and pressing the ' key next to it, is intended for Siri.
+
+\* I pronounce “fn” as “effin’”. Your mileage may vary.

layouts/community/ergodox/zweihander-macos/rules.mk

@@ -0,0 +1,3 @@
+# Don’t do a tricolor flashing-light wave when the computer is shut down in Windows,
+# or when the machine is sleeping in macOS
+SLEEP_LED_ENABLE = no

layouts/community/ergodox/zweihander-osx/readme.markdown

@@ -1,45 +0,0 @@
-# The Zweihander Layout
-
-NB: the backtick (\`) is special in Markdown. If I write ⌘\` in this readme, I mean “command-backtick”, not “command-backslash-backtick”.
-
-This layout is tuned for people who…
-
-
-## use OS X
-
-While this layout should work fine in Windows, it’s not tuned for it. No sane person who primarily uses Windows would put this many Windows keys on a keyboard layout.
-
-
-## mouse left-handed while doing other things with the right hand
-
-I tend to have my mouse in my left hand, but I like to use my other hand to make things go faster. I’ve added a bunch of buttons to the media layer to speed up browsing in Safari and Finder:
-
-- Close Window (⌘W)
-- Back (⌘[)
-- Forward (⌘])
-- Open and Close Parent Folder (⌥⌘↓)
-- Go Up and Close Just-Left Folder (⌥⌘↑)
-- Cycle through open windows in current application (⌘\` and ⌘⇧\`)
-
-Because moving letter-by-letter is way slower than moving word-by-word, I added Option (⌥) to the bottommost button on the left side. This key can be held easily while holding ; (activate media layer) and pressing J and L to move left and right by word.
-
-
-## use lots of modifier keys in OS X menu-item shortcuts
-
-I wanted to preserve the feel of a number of shortcuts that involve pressing lots of modifier keys at once; this is why the bottom left of the keyboard has shift, control, option, and command in the usual spaces. Further, some common shortcuts I press have a key on the right side of the keyboard. These shortcuts include:
-
-- Empty Trash Without Asking for Confirmation (⇧⌥⌘⌫)
-
-⇧⌥⌘⌫, when you press the backspace on the right half of the keyboard, is much more satisfying than if you curl your left hand into a claw to press all the keys on the left. Try both; you’ll agree.
-
-
-## use Emacs-style shortcuts
-
-I press C-a, C-e, and C-k all the time. It’s difficult to press these key combinations with the control key on the bottom left and I’m too quick on the draw for the control function on the / key to work reliably, so the bottommost thumb button on the right side is another control key.
-
-Having trouble remembering which thumb key is alt and which is ctrl? It’s like on the lower right of a normal keyboard — leftmost is alt, rightmost is ctrl.
-
-
-## use spreadsheets
-
-All the common spreadsheet operations (+-*/=) are now on the right side of the symbol layer. There’s also a colon there for entering times and maybe IPv6 addresses. Not that I expect people to type IPv6 addresses into a spreadsheet, but, y’know.

layouts/community/ergodox/zweihander-osx/rules.mk

@@ -1,2 +0,0 @@
-# Don’t do a tricolor wave when the computer is shut down in Windows
-SLEEP_LED_ENABLE = no

quantum/audio/song_list.h

@@ -53,6 +53,12 @@
     E__NOTE(_CS4), E__NOTE(_B4),  QD_NOTE(_AS4), \
     E__NOTE(_AS4), E__NOTE(_AS4), QD_NOTE(_B4),
 
+#define IMPERIAL_MARCH \
+  HD_NOTE(_A4), HD_NOTE(_A4), HD_NOTE(_A4), QD_NOTE(_F4), QD_NOTE(_C5), \
+  HD_NOTE(_A4), QD_NOTE(_F4),  QD_NOTE(_C5), WD_NOTE(_A4), \
+  HD_NOTE(_E5), HD_NOTE(_E5), HD_NOTE(_E5), QD_NOTE(_F5), QD_NOTE(_C5), \
+  HD_NOTE(_A4), QD_NOTE(_F4),  QD_NOTE(_C5), WD_NOTE(_A4)
+
 #define CLUEBOARD_SOUND \
     HD_NOTE(_C3), HD_NOTE(_D3), HD_NOTE(_E3), HD_NOTE(_F3), HD_NOTE(_G3), HD_NOTE(_A4), HD_NOTE(_B4), HD_NOTE(_C4)
 /*

quantum/quantum.c

@@ -904,7 +904,7 @@ void backlight_task(void) {
       _SFR_IO8((backlight_pin >> 4) + 2) &= ~_BV(backlight_pin & 0xF);
     #endif
   }
-  backlight_tick = backlight_tick + 1 % 16;
+  backlight_tick = (backlight_tick + 1) % 16;
 }
 #endif
 

tmk_core/rules.mk

@@ -371,7 +371,7 @@ show_path:
 	@echo OBJ=$(OBJ)
 
 check-size:
-	$(eval MAX_SIZE=$(shell n=`avr-gcc -E -mmcu=$(MCU) $(CFLAGS) $(OPT_DEFS) tmk_core/common/avr/bootloader_size.c 2> /dev/null | grep -oP "(?<=AVR_SIZE: ).+"`; echo $$(($$n)) || echo 0))
+	$(eval MAX_SIZE=$(shell n=`avr-gcc -E -mmcu=$(MCU) $(CFLAGS) $(OPT_DEFS) tmk_core/common/avr/bootloader_size.c 2> /dev/null | perl -ne 'print "$&\n" if /(?<=AVR_SIZE: ).+/'`; echo $$(($$n)) || echo 0))
 	$(eval CURRENT_SIZE=$(shell if [ -f $(BUILD_DIR)/$(TARGET).hex ]; then $(SIZE) --target=$(FORMAT) $(BUILD_DIR)/$(TARGET).hex | $(AWK) 'NR==2 {print $$4}'; else printf 0; fi))
 	if [ $(MAX_SIZE) -gt 0 ] && [ $(CURRENT_SIZE) -gt 0 ]; then \
 		$(SILENT) || printf "$(MSG_CHECK_FILESIZE)" | $(AWK_CMD); \