Keep pressed keys on layer state change (fixes #2053, #2279) (#3905)

* Keep pressed keys on layer state change

* Add doc comment for clear_keyboard_but_mods_and_keys

* Keep pressed keys only if PREVENT_STUCK_MODIFIERS is on

* Check STRICT_LAYER_RELEASE instead of PREVENT_STUCK_MODIFIERS

.travis.yml

@@ -19,6 +19,7 @@ install:
 before_script:
   - avr-gcc --version
 script:
+- git rev-parse --short HEAD
 - make test:all AUTOGEN=false
 - bash util/travis_build.sh
 - bash util/travis_docs.sh
@@ -33,7 +34,7 @@ addons:
     - diffutils
     - dos2unix
     - doxygen
-after_success: 
+after_success:
   bash util/travis_compiled_push.sh
 notifications:
   webhooks:

common_features.mk

@@ -263,11 +263,6 @@ ifneq ($(strip $(CUSTOM_MATRIX)), yes)
 endif
 
 ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
-    SERIAL_BACKWARD_COMPAT := $(wildcard $(QUANTUM_DIR)/split_common/serial_backward_compatibility.h)
-    ifneq ($(SERIAL_BACKWARD_COMPAT),)
-      CONFIG_H += $(SERIAL_BACKWARD_COMPAT)
-      # $(info CONFIG_H=$(CONFIG_H))
-    endif
     OPT_DEFS += -DSPLIT_KEYBOARD
     QUANTUM_SRC += $(QUANTUM_DIR)/split_common/split_flags.c \
                 $(QUANTUM_DIR)/split_common/split_util.c

docs/feature_advanced_keycodes.md

@@ -21,7 +21,7 @@ Additionally, if at least one right-handed modifier is specified in a Mod Tap or
 
 # Switching and Toggling Layers
 
-These functions allow you to activate layers in various ways. Note that layers are not generally independent layouts -- multiple layers can be activated at once, and it's typical for layers to use `KC_TRNS` to allow keypresses to pass through to lower layers. For a detailed explanation of layers, see [Keymap Overview](keymap.md#keymap-and-layers)
+These functions allow you to activate layers in various ways. Note that layers are not generally independent layouts -- multiple layers can be activated at once, and it's typical for layers to use `KC_TRNS` to allow keypresses to pass through to lower layers. For a detailed explanation of layers, see [Keymap Overview](keymap.md#keymap-and-layers) When using momentary layer switching with MO(), LM(), TT(), or LT(), make sure to leave the key on the above layers transparent or it may not work as intended.
 
 * `DF(layer)` - switches the default layer. The default layer is the always-active base layer that other layers stack on top of. See below for more about the default layer. This might be used to switch from QWERTY to Dvorak layout. (Note that this is a temporary switch that only persists until the keyboard loses power. To modify the default layer in a persistent way requires deeper customization, such as calling the `set_single_persistent_default_layer` function inside of [process_record_user](custom_quantum_functions.md#programming-the-behavior-of-any-keycode).)
 * `MO(layer)` - momentarily activates *layer*. As soon as you let go of the key, the layer is deactivated. 

docs/feature_unicode.md

@@ -23,7 +23,7 @@ const uint32_t PROGMEM unicode_map[] = {
   [BANG]    = 0x203D,  // ‽
   [IRONY]   = 0x2E2E,  // ⸮
   [SNEK]    = 0x1F40D, // 🐍
-}:
+};
 ```
 
 Make sure that the order for both matches.

keyboards/chibios_test/boards/ST_STM32F072B_DISCOVERY/board.c

@@ -0,0 +1,111 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * This file has been automatically generated using ChibiStudio board
+ * generator plugin. Do not edit manually.
+ */
+
+#include "hal.h"
+
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+/**
+ * @brief   PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ *          This variable is used by the HAL when initializing the PAL driver.
+ */
+const PALConfig pal_default_config = {
+#if STM32_HAS_GPIOA
+  {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
+   VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH},
+#endif
+#if STM32_HAS_GPIOB
+  {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
+   VAL_GPIOB_ODR,   VAL_GPIOB_AFRL,   VAL_GPIOB_AFRH},
+#endif
+#if STM32_HAS_GPIOC
+  {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
+   VAL_GPIOC_ODR,   VAL_GPIOC_AFRL,   VAL_GPIOC_AFRH},
+#endif
+#if STM32_HAS_GPIOD
+  {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
+   VAL_GPIOD_ODR,   VAL_GPIOD_AFRL,   VAL_GPIOD_AFRH},
+#endif
+#if STM32_HAS_GPIOE
+  {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
+   VAL_GPIOE_ODR,   VAL_GPIOE_AFRL,   VAL_GPIOE_AFRH},
+#endif
+#if STM32_HAS_GPIOF
+  {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
+   VAL_GPIOF_ODR,   VAL_GPIOF_AFRL,   VAL_GPIOF_AFRH},
+#endif
+#if STM32_HAS_GPIOG
+  {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
+   VAL_GPIOG_ODR,   VAL_GPIOG_AFRL,   VAL_GPIOG_AFRH},
+#endif
+#if STM32_HAS_GPIOH
+  {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
+   VAL_GPIOH_ODR,   VAL_GPIOH_AFRL,   VAL_GPIOH_AFRH},
+#endif
+#if STM32_HAS_GPIOI
+  {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
+   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH}
+#endif
+};
+#endif
+
+void enter_bootloader_mode_if_requested(void);
+
+/**
+ * @brief   Early initialization code.
+ * @details This initialization must be performed just after stack setup
+ *          and before any other initialization.
+ */
+void __early_init(void) {
+  enter_bootloader_mode_if_requested();
+  stm32_clock_init();
+}
+
+
+
+#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
+/**
+ * @brief   MMC_SPI card detection.
+ */
+bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
+
+  (void)mmcp;
+  /* TODO: Fill the implementation.*/
+  return true;
+}
+
+/**
+ * @brief   MMC_SPI card write protection detection.
+ */
+bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
+
+  (void)mmcp;
+  /* TODO: Fill the implementation.*/
+  return false;
+}
+#endif
+
+/**
+ * @brief   Board-specific initialization code.
+ * @todo    Add your board-specific code, if any.
+ */
+void boardInit(void) {
+}

keyboards/chibios_test/boards/ST_STM32F072B_DISCOVERY/board.h

@@ -0,0 +1,923 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * This file has been automatically generated using ChibiStudio board
+ * generator plugin. Do not edit manually.
+ */
+
+#ifndef BOARD_H
+#define BOARD_H
+
+/*
+ * Setup for ST STM32F072B-Discovery board.
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_ST_STM32F072B_DISCOVERY
+#define BOARD_NAME                  "ST STM32F072B-Discovery"
+
+/*
+ * Board oscillators-related settings.
+ * NOTE: LSE not fitted.
+ * NOTE: HSE not fitted.
+ */
+#if !defined(STM32_LSECLK)
+#define STM32_LSECLK                0U
+#endif
+
+#define STM32_LSEDRV                (3U << 3U)
+
+#if !defined(STM32_HSECLK)
+#define STM32_HSECLK                0U
+#endif
+
+#define STM32_HSE_BYPASS
+
+/*
+ * MCU type as defined in the ST header.
+ */
+#define STM32F072xB
+
+/*
+ * IO pins assignments.
+ */
+#define GPIOA_BUTTON                0U
+#define GPIOA_PIN1                  1U
+#define GPIOA_PIN2                  2U
+#define GPIOA_PIN3                  3U
+#define GPIOA_PIN4                  4U
+#define GPIOA_PIN5                  5U
+#define GPIOA_PIN6                  6U
+#define GPIOA_PIN7                  7U
+#define GPIOA_PIN8                  8U
+#define GPIOA_PIN9                  9U
+#define GPIOA_PIN10                 10U
+#define GPIOA_USB_DM                11U
+#define GPIOA_USB_DP                12U
+#define GPIOA_SWDIO                 13U
+#define GPIOA_SWCLK                 14U
+#define GPIOA_PIN15                 15U
+
+#define GPIOB_PIN0                  0U
+#define GPIOB_PIN1                  1U
+#define GPIOB_PIN2                  2U
+#define GPIOB_PIN3                  3U
+#define GPIOB_PIN4                  4U
+#define GPIOB_PIN5                  5U
+#define GPIOB_PIN6                  6U
+#define GPIOB_PIN7                  7U
+#define GPIOB_PIN8                  8U
+#define GPIOB_PIN9                  9U
+#define GPIOB_PIN10                 10U
+#define GPIOB_PIN11                 11U
+#define GPIOB_PIN12                 12U
+#define GPIOB_SPI2_SCK              13U
+#define GPIOB_SPI2_MISO             14U
+#define GPIOB_SPI2_MOSI             15U
+
+#define GPIOC_MEMS_CS               0U
+#define GPIOC_PIN1                  1U
+#define GPIOC_PIN2                  2U
+#define GPIOC_PIN3                  3U
+#define GPIOC_PIN4                  4U
+#define GPIOC_PIN5                  5U
+#define GPIOC_LED_RED               6U
+#define GPIOC_LED_BLUE              7U
+#define GPIOC_LED_ORANGE            8U
+#define GPIOC_LED_GREEN             9U
+#define GPIOC_PIN10                 10U
+#define GPIOC_PIN11                 11U
+#define GPIOC_PIN12                 12U
+#define GPIOC_PIN13                 13U
+#define GPIOC_OSC32_IN              14U
+#define GPIOC_OSC32_OUT             15U
+
+#define GPIOD_PIN0                  0U
+#define GPIOD_PIN1                  1U
+#define GPIOD_PIN2                  2U
+#define GPIOD_PIN3                  3U
+#define GPIOD_PIN4                  4U
+#define GPIOD_PIN5                  5U
+#define GPIOD_PIN6                  6U
+#define GPIOD_PIN7                  7U
+#define GPIOD_PIN8                  8U
+#define GPIOD_PIN9                  9U
+#define GPIOD_PIN10                 10U
+#define GPIOD_PIN11                 11U
+#define GPIOD_PIN12                 12U
+#define GPIOD_PIN13                 13U
+#define GPIOD_PIN14                 14U
+#define GPIOD_PIN15                 15U
+
+#define GPIOE_PIN0                  0U
+#define GPIOE_PIN1                  1U
+#define GPIOE_PIN2                  2U
+#define GPIOE_PIN3                  3U
+#define GPIOE_PIN4                  4U
+#define GPIOE_PIN5                  5U
+#define GPIOE_PIN6                  6U
+#define GPIOE_PIN7                  7U
+#define GPIOE_PIN8                  8U
+#define GPIOE_PIN9                  9U
+#define GPIOE_PIN10                 10U
+#define GPIOE_PIN11                 11U
+#define GPIOE_PIN12                 12U
+#define GPIOE_PIN13                 13U
+#define GPIOE_PIN14                 14U
+#define GPIOE_PIN15                 15U
+
+#define GPIOF_OSC_IN                0U
+#define GPIOF_OSC_OUT               1U
+#define GPIOF_PIN2                  2U
+#define GPIOF_PIN3                  3U
+#define GPIOF_PIN4                  4U
+#define GPIOF_PIN5                  5U
+#define GPIOF_PIN6                  6U
+#define GPIOF_PIN7                  7U
+#define GPIOF_PIN8                  8U
+#define GPIOF_PIN9                  9U
+#define GPIOF_PIN10                 10U
+#define GPIOF_PIN11                 11U
+#define GPIOF_PIN12                 12U
+#define GPIOF_PIN13                 13U
+#define GPIOF_PIN14                 14U
+#define GPIOF_PIN15                 15U
+
+/*
+ * IO lines assignments.
+ */
+#define LINE_BUTTON                 PAL_LINE(GPIOA, 0U)
+#define LINE_USB_DM                 PAL_LINE(GPIOA, 11U)
+#define LINE_USB_DP                 PAL_LINE(GPIOA, 12U)
+#define LINE_SWDIO                  PAL_LINE(GPIOA, 13U)
+#define LINE_SWCLK                  PAL_LINE(GPIOA, 14U)
+
+#define LINE_SPI2_SCK               PAL_LINE(GPIOB, 13U)
+#define LINE_SPI2_MISO              PAL_LINE(GPIOB, 14U)
+#define LINE_SPI2_MOSI              PAL_LINE(GPIOB, 15U)
+
+#define LINE_MEMS_CS                PAL_LINE(GPIOC, 0U)
+#define LINE_LED_RED                PAL_LINE(GPIOC, 6U)
+#define LINE_LED_BLUE               PAL_LINE(GPIOC, 7U)
+#define LINE_LED_ORANGE             PAL_LINE(GPIOC, 8U)
+#define LINE_LED_GREEN              PAL_LINE(GPIOC, 9U)
+#define LINE_OSC32_IN               PAL_LINE(GPIOC, 14U)
+#define LINE_OSC32_OUT              PAL_LINE(GPIOC, 15U)
+
+
+
+#define LINE_OSC_IN                 PAL_LINE(GPIOF, 0U)
+#define LINE_OSC_OUT                PAL_LINE(GPIOF, 1U)
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+#define PIN_MODE_INPUT(n)           (0U << ((n) * 2U))
+#define PIN_MODE_OUTPUT(n)          (1U << ((n) * 2U))
+#define PIN_MODE_ALTERNATE(n)       (2U << ((n) * 2U))
+#define PIN_MODE_ANALOG(n)          (3U << ((n) * 2U))
+#define PIN_ODR_LOW(n)              (0U << (n))
+#define PIN_ODR_HIGH(n)             (1U << (n))
+#define PIN_OTYPE_PUSHPULL(n)       (0U << (n))
+#define PIN_OTYPE_OPENDRAIN(n)      (1U << (n))
+#define PIN_OSPEED_VERYLOW(n)       (0U << ((n) * 2U))
+#define PIN_OSPEED_LOW(n)           (1U << ((n) * 2U))
+#define PIN_OSPEED_MEDIUM(n)        (2U << ((n) * 2U))
+#define PIN_OSPEED_HIGH(n)          (3U << ((n) * 2U))
+#define PIN_PUPDR_FLOATING(n)       (0U << ((n) * 2U))
+#define PIN_PUPDR_PULLUP(n)         (1U << ((n) * 2U))
+#define PIN_PUPDR_PULLDOWN(n)       (2U << ((n) * 2U))
+#define PIN_AFIO_AF(n, v)           ((v) << (((n) % 8U) * 4U))
+
+/*
+ * GPIOA setup:
+ *
+ * PA0  - BUTTON                    (input floating).
+ * PA1  - PIN1                      (input pullup).
+ * PA2  - PIN2                      (input pullup).
+ * PA3  - PIN3                      (input pullup).
+ * PA4  - PIN4                      (input pullup).
+ * PA5  - PIN5                      (input pullup).
+ * PA6  - PIN6                      (input pullup).
+ * PA7  - PIN7                      (input pullup).
+ * PA8  - PIN8                      (input pullup).
+ * PA9  - PIN9                      (input pullup).
+ * PA10 - PIN10                     (input pullup).
+ * PA11 - USB_DM                    (input floating).
+ * PA12 - USB_DP                    (input floating).
+ * PA13 - SWDIO                     (alternate 0).
+ * PA14 - SWCLK                     (alternate 0).
+ * PA15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOA_MODER             (PIN_MODE_INPUT(GPIOA_BUTTON) |         \
+                                     PIN_MODE_INPUT(GPIOA_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOA_USB_DM) |         \
+                                     PIN_MODE_INPUT(GPIOA_USB_DP) |         \
+                                     PIN_MODE_ALTERNATE(GPIOA_SWDIO) |      \
+                                     PIN_MODE_ALTERNATE(GPIOA_SWCLK) |      \
+                                     PIN_MODE_INPUT(GPIOA_PIN15))
+#define VAL_GPIOA_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
+#define VAL_GPIOA_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOA_USB_DM) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOA_USB_DP) |     \
+                                     PIN_OSPEED_HIGH(GPIOA_SWDIO) |         \
+                                     PIN_OSPEED_HIGH(GPIOA_SWCLK) |         \
+                                     PIN_OSPEED_HIGH(GPIOA_PIN15))
+#define VAL_GPIOA_PUPDR             (PIN_PUPDR_FLOATING(GPIOA_BUTTON) |     \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN10) |        \
+                                     PIN_PUPDR_FLOATING(GPIOA_USB_DM) |     \
+                                     PIN_PUPDR_FLOATING(GPIOA_USB_DP) |     \
+                                     PIN_PUPDR_PULLUP(GPIOA_SWDIO) |        \
+                                     PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) |      \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN15))
+#define VAL_GPIOA_ODR               (PIN_ODR_HIGH(GPIOA_BUTTON) |           \
+                                     PIN_ODR_HIGH(GPIOA_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOA_USB_DM) |           \
+                                     PIN_ODR_HIGH(GPIOA_USB_DP) |           \
+                                     PIN_ODR_HIGH(GPIOA_SWDIO) |            \
+                                     PIN_ODR_HIGH(GPIOA_SWCLK) |            \
+                                     PIN_ODR_HIGH(GPIOA_PIN15))
+#define VAL_GPIOA_AFRL              (PIN_AFIO_AF(GPIOA_BUTTON, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN7, 0U))
+#define VAL_GPIOA_AFRH              (PIN_AFIO_AF(GPIOA_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOA_USB_DM, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_USB_DP, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_SWDIO, 0U) |         \
+                                     PIN_AFIO_AF(GPIOA_SWCLK, 0U) |         \
+                                     PIN_AFIO_AF(GPIOA_PIN15, 0U))
+
+/*
+ * GPIOB setup:
+ *
+ * PB0  - PIN0                      (input pullup).
+ * PB1  - PIN1                      (input pullup).
+ * PB2  - PIN2                      (input pullup).
+ * PB3  - PIN3                      (input pullup).
+ * PB4  - PIN4                      (input pullup).
+ * PB5  - PIN5                      (input pullup).
+ * PB6  - PIN6                      (input pullup).
+ * PB7  - PIN7                      (input pullup).
+ * PB8  - PIN8                      (input pullup).
+ * PB9  - PIN9                      (input pullup).
+ * PB10 - PIN10                     (input pullup).
+ * PB11 - PIN11                     (input pullup).
+ * PB12 - PIN12                     (input pullup).
+ * PB13 - SPI2_SCK                  (alternate 0).
+ * PB14 - SPI2_MISO                 (alternate 0).
+ * PB15 - SPI2_MOSI                 (alternate 0).
+ */
+#define VAL_GPIOB_MODER             (PIN_MODE_INPUT(GPIOB_PIN0) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOB_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOB_PIN12) |          \
+                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) |   \
+                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) |  \
+                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) |   \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) |  \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOB_PIN0) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN1) |       \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN2) |          \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN3) |          \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN4) |          \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) |   \
+                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) |  \
+                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_PUPDR             (PIN_PUPDR_PULLUP(GPIOB_PIN0) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN12) |        \
+                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) |   \
+                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) |  \
+                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_ODR               (PIN_ODR_HIGH(GPIOB_PIN0) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOB_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOB_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOB_SPI2_SCK) |         \
+                                     PIN_ODR_HIGH(GPIOB_SPI2_MISO) |        \
+                                     PIN_ODR_HIGH(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_AFRL              (PIN_AFIO_AF(GPIOB_PIN0, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN7, 0U))
+#define VAL_GPIOB_AFRH              (PIN_AFIO_AF(GPIOB_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOB_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOB_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) |      \
+                                     PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) |     \
+                                     PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U))
+
+/*
+ * GPIOC setup:
+ *
+ * PC0  - MEMS_CS                   (output pushpull maximum).
+ * PC1  - PIN1                      (input pullup).
+ * PC2  - PIN2                      (input pullup).
+ * PC3  - PIN3                      (input pullup).
+ * PC4  - PIN4                      (input pullup).
+ * PC5  - PIN5                      (input pullup).
+ * PC6  - LED_RED                   (output pushpull maximum).
+ * PC7  - LED_BLUE                  (output pushpull maximum).
+ * PC8  - LED_ORANGE                (output pushpull maximum).
+ * PC9  - LED_GREEN                 (output pushpull maximum).
+ * PC10 - PIN10                     (input pullup).
+ * PC11 - PIN11                     (input pullup).
+ * PC12 - PIN12                     (input pullup).
+ * PC13 - PIN13                     (input pullup).
+ * PC14 - OSC32_IN                  (input floating).
+ * PC15 - OSC32_OUT                 (input floating).
+ */
+#define VAL_GPIOC_MODER             (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) |       \
+                                     PIN_MODE_INPUT(GPIOC_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN5) |           \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_RED) |       \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_BLUE) |      \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) |    \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_GREEN) |     \
+                                     PIN_MODE_INPUT(GPIOC_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOC_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOC_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOC_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOC_OSC32_IN) |       \
+                                     PIN_MODE_INPUT(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) |    \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) |    \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) |   \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) |  \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) |   \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_OSPEEDR           (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN5) |       \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_RED) |       \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_BLUE) |      \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) |    \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_GREEN) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN13) |      \
+                                     PIN_OSPEED_HIGH(GPIOC_OSC32_IN) |      \
+                                     PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_PUPDR             (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) |    \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN5) |         \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_RED) |    \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) |   \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) |  \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN13) |        \
+                                     PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) |   \
+                                     PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_ODR               (PIN_ODR_HIGH(GPIOC_MEMS_CS) |          \
+                                     PIN_ODR_HIGH(GPIOC_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN5) |             \
+                                     PIN_ODR_LOW(GPIOC_LED_RED) |           \
+                                     PIN_ODR_LOW(GPIOC_LED_BLUE) |          \
+                                     PIN_ODR_LOW(GPIOC_LED_ORANGE) |        \
+                                     PIN_ODR_LOW(GPIOC_LED_GREEN) |         \
+                                     PIN_ODR_HIGH(GPIOC_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOC_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOC_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOC_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOC_OSC32_IN) |         \
+                                     PIN_ODR_HIGH(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_AFRL              (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) |       \
+                                     PIN_AFIO_AF(GPIOC_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_LED_RED, 0U) |       \
+                                     PIN_AFIO_AF(GPIOC_LED_BLUE, 0U))
+#define VAL_GPIOC_AFRH              (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) |    \
+                                     PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) |     \
+                                     PIN_AFIO_AF(GPIOC_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) |      \
+                                     PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U))
+
+/*
+ * GPIOD setup:
+ *
+ * PD0  - PIN0                      (input pullup).
+ * PD1  - PIN1                      (input pullup).
+ * PD2  - PIN2                      (input pullup).
+ * PD3  - PIN3                      (input pullup).
+ * PD4  - PIN4                      (input pullup).
+ * PD5  - PIN5                      (input pullup).
+ * PD6  - PIN6                      (input pullup).
+ * PD7  - PIN7                      (input pullup).
+ * PD8  - PIN8                      (input pullup).
+ * PD9  - PIN9                      (input pullup).
+ * PD10 - PIN10                     (input pullup).
+ * PD11 - PIN11                     (input pullup).
+ * PD12 - PIN12                     (input pullup).
+ * PD13 - PIN13                     (input pullup).
+ * PD14 - PIN14                     (input pullup).
+ * PD15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOD_MODER             (PIN_MODE_INPUT(GPIOD_PIN0) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN14) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN15))
+#define VAL_GPIOD_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN14) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
+#define VAL_GPIOD_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOD_PIN0) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN13) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN14) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN15))
+#define VAL_GPIOD_PUPDR             (PIN_PUPDR_PULLUP(GPIOD_PIN0) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN13) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN14) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN15))
+#define VAL_GPIOD_ODR               (PIN_ODR_HIGH(GPIOD_PIN0) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN14) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN15))
+#define VAL_GPIOD_AFRL              (PIN_AFIO_AF(GPIOD_PIN0, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN7, 0U))
+#define VAL_GPIOD_AFRH              (PIN_AFIO_AF(GPIOD_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN14, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN15, 0U))
+
+/*
+ * GPIOE setup:
+ *
+ * PE0  - PIN0                      (input pullup).
+ * PE1  - PIN1                      (input pullup).
+ * PE2  - PIN2                      (input pullup).
+ * PE3  - PIN3                      (input pullup).
+ * PE4  - PIN4                      (input pullup).
+ * PE5  - PIN5                      (input pullup).
+ * PE6  - PIN6                      (input pullup).
+ * PE7  - PIN7                      (input pullup).
+ * PE8  - PIN8                      (input pullup).
+ * PE9  - PIN9                      (input pullup).
+ * PE10 - PIN10                     (input pullup).
+ * PE11 - PIN11                     (input pullup).
+ * PE12 - PIN12                     (input pullup).
+ * PE13 - PIN13                     (input pullup).
+ * PE14 - PIN14                     (input pullup).
+ * PE15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOE_MODER             (PIN_MODE_INPUT(GPIOE_PIN0) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN14) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN15))
+#define VAL_GPIOE_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN14) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
+#define VAL_GPIOE_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOE_PIN0) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN13) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN14) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN15))
+#define VAL_GPIOE_PUPDR             (PIN_PUPDR_PULLUP(GPIOE_PIN0) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN13) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN14) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN15))
+#define VAL_GPIOE_ODR               (PIN_ODR_HIGH(GPIOE_PIN0) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN14) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN15))
+#define VAL_GPIOE_AFRL              (PIN_AFIO_AF(GPIOE_PIN0, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN7, 0U))
+#define VAL_GPIOE_AFRH              (PIN_AFIO_AF(GPIOE_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN14, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN15, 0U))
+
+/*
+ * GPIOF setup:
+ *
+ * PF0  - OSC_IN                    (input floating).
+ * PF1  - OSC_OUT                   (input floating).
+ * PF2  - PIN2                      (input pullup).
+ * PF3  - PIN3                      (input pullup).
+ * PF4  - PIN4                      (input pullup).
+ * PF5  - PIN5                      (input pullup).
+ * PF6  - PIN6                      (input pullup).
+ * PF7  - PIN7                      (input pullup).
+ * PF8  - PIN8                      (input pullup).
+ * PF9  - PIN9                      (input pullup).
+ * PF10 - PIN10                     (input pullup).
+ * PF11 - PIN11                     (input pullup).
+ * PF12 - PIN12                     (input pullup).
+ * PF13 - PIN13                     (input pullup).
+ * PF14 - PIN14                     (input pullup).
+ * PF15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOF_MODER             (PIN_MODE_INPUT(GPIOF_OSC_IN) |         \
+                                     PIN_MODE_INPUT(GPIOF_OSC_OUT) |        \
+                                     PIN_MODE_INPUT(GPIOF_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN14) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN15))
+#define VAL_GPIOF_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) |    \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN14) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
+#define VAL_GPIOF_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) |    \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN13) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN14) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN15))
+#define VAL_GPIOF_PUPDR             (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) |     \
+                                     PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) |    \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN13) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN14) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN15))
+#define VAL_GPIOF_ODR               (PIN_ODR_HIGH(GPIOF_OSC_IN) |           \
+                                     PIN_ODR_HIGH(GPIOF_OSC_OUT) |          \
+                                     PIN_ODR_HIGH(GPIOF_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN14) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN15))
+#define VAL_GPIOF_AFRL              (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) |        \
+                                     PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) |       \
+                                     PIN_AFIO_AF(GPIOF_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN7, 0U))
+#define VAL_GPIOF_AFRH              (PIN_AFIO_AF(GPIOF_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN14, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN15, 0U))
+
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+  void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* BOARD_H */

keyboards/chibios_test/boards/ST_STM32F072B_DISCOVERY/board.mk

@@ -0,0 +1,5 @@
+# List of all the board related files.
+BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c
+
+# Required include directories
+BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY

keyboards/dz60/dz60.h

@@ -332,6 +332,33 @@
     { k40,  k41,   KC_NO, k43,  k44,  KC_NO, k46,  KC_NO, k48,  KC_NO, k4a,  k4b,   k4c,  k4d,  k4e   }  \
 }
 
+/* LAYOUT_60_tsangan
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐
+ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │    0e │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤
+ * │10   │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │1e   │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
+ * │20    │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2d      │
+ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤
+ * │30      │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3d    │3e │
+ * ├─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬───┬─┴───┤
+ * │40   │41 │43   │46 (7u)                    │4b   │4d │4e   │
+ * └─────┴───┴─────┴───────────────────────────┴─────┴───┴─────┘
+*/
+#define LAYOUT_60_tsangan( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c,      k0e, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d,      \
+    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,      k3d, k3e, \
+    k40, k41,      k43,           k46,                     k4b,      k4d, k4e  \
+) { \
+    { k00,   k01,   k02,   k03,  k04,   k05,   k06,  k07,   k08,   k09,   k0a,   k0b,  k0c,   KC_NO,  k0e   }, \
+    { k10,   KC_NO, k12,   k13,  k14,   k15,   k16,  k17,   k18,   k19,   k1a,   k1b,  k1c,   k1d,    k1e   }, \
+    { k20,   KC_NO, k22,   k23,  k24,   k25,   k26,  k27,   k28,   k29,   k2a,   k2b,  k2c,   k2d,    KC_NO }, \
+    { k30,   KC_NO, k32,   k33,  k34,   k35,   k36,  k37,   k38,   k39,   k3a,   k3b,  KC_NO, k3d,    k3e   }, \
+    { k40,   k41,   KC_NO, k43,  KC_NO, KC_NO, k46,  KC_NO, KC_NO, KC_NO, KC_NO, k4b,  KC_NO, k4d,    k4e   }  \
+}
+
 /* LAYOUT_60_tsangan_hhkb
  * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
  * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │0e │

keyboards/dz60/info.json

@@ -53,6 +53,10 @@
       "key_count": 67,
       "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"1", "x":1, "y":0}, {"label":"2", "x":2, "y":0}, {"label":"3", "x":3, "y":0}, {"label":"4", "x":4, "y":0}, {"label":"5", "x":5, "y":0}, {"label":"6", "x":6, "y":0}, {"label":"7", "x":7, "y":0}, {"label":"8", "x":8, "y":0}, {"label":"9", "x":9, "y":0}, {"label":"0", "x":10, "y":0}, {"label":"-", "x":11, "y":0}, {"label":"=", "x":12, "y":0}, {"x":13, "y":0}, {"label":"Back Space", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"[", "x":11.5, "y":1}, {"label":"]", "x":12.5, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":";", "x":10.75, "y":2}, {"label":"'", "x":11.75, "y":2}, {"label":"#", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"\\", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":",", "x":9.25, "y":3}, {"label":".", "x":10.25, "y":3}, {"label":"Shift", "x":11.25, "y":3, "w":1.75}, {"label":"Up", "x":13, "y":3}, {"label":"Del", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"GUI", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"label":"Space", "x":3.75, "y":4, "w":2.25}, {"label":"Space", "x":6, "y":4, "w":1.25}, {"label":"Space", "x":7.25, "y":4, "w":2.75}, {"label":"AltGr", "x":10, "y":4}, {"label":"Fn", "x":11, "y":4}, {"label":"Left", "x":12, "y":4}, {"label":"Down", "x":13, "y":4}, {"label":"Right", "x":14, "y":4}]
     },
+    "LAYOUT_60_tsangan": {
+      "keycount": 61,
+      "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Win", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}]  
+    },
     "LAYOUT_60_tsangan_hhkb": {
       "key_count": 62,
       "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Backspace", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Win", "x":11, "y":4, "w":1.5}, {"label":"Menu", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}]

keyboards/dz60/keymaps/60_tsangan/keymap.c

@@ -0,0 +1,32 @@
+#include QMK_KEYBOARD_H
+
+enum keyboard_layers {
+  _BL = 0, // Base Layer
+  _FL,      // Function Layer
+  _CL      // Control Layer
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	[_BL] = LAYOUT_60_tsangan(
+		KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,           KC_BSPC,
+		KC_TAB,           KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+		KC_CAPS,          KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+		KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT, MO(_FL),
+		KC_LCTL, KC_LGUI,          KC_LALT,                   KC_SPC,                                      KC_RALT,          KC_RGUI, KC_RCTL
+	),
+	[_FL] = LAYOUT_60_tsangan(
+		KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,           KC_DEL,
+		_______,          _______, KC_UP,   _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, RESET,
+		_______,          KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, KC_INS,  KC_HOME, KC_PGUP, _______,
+		_______,          _______, _______, _______, _______, _______, _______, _______, _______, KC_END,  KC_PGDN,          _______, _______,
+		_______, _______,          _______,                   _______,                                     _______,          MO(_CL), _______
+	),
+	[_CL] = LAYOUT_60_tsangan(
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,           _______,
+		_______,          RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______,
+		_______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+		_______,          _______, _______, _______, _______, BL_DEC,  BL_TOGG, BL_INC,  BL_STEP, _______, _______,          _______, _______,
+		_______, _______,          _______,                   _______,                                     _______,          _______, _______
+	)
+};

keyboards/handwired/not_so_minidox/info.json

@@ -0,0 +1,63 @@
+{
+  "keyboard_name": "Not So MiniDox",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 12,
+  "height": 5.75,
+  "layouts": {
+    "LAYOUT": {
+      "key_count": 42,
+      "layout": [
+        {"x":0, "y":0.375},
+        {"x":1, "y":0.25},
+        {"x":2, "y":0.125},
+        {"x":3, "y":0},
+        {"x":4, "y":0.125},
+        {"x":5, "y":0.25},
+
+        {"x":8, "y":0.25},
+        {"x":9, "y":0.125},
+        {"x":10, "y":0},
+        {"x":11, "y":0.125},
+        {"x":12, "y":0.25},
+        {"x":13, "y":0.375},
+
+        {"x":0, "y":1.375},
+        {"x":1, "y":1.25},
+        {"x":2, "y":1.125},
+        {"x":3, "y":1},
+        {"x":4, "y":1.125},
+        {"x":5, "y":1.25},
+
+        {"x":8, "y":1.25},
+        {"x":9, "y":1.125},
+        {"x":10, "y":1},
+        {"x":11, "y":1.125},
+        {"x":12, "y":1.25},
+        {"x":13, "y":1.375},
+
+        {"x":0, "y":2.375},
+        {"x":1, "y":2.25},
+        {"x":2, "y":2.125},
+        {"x":3, "y":2},
+        {"x":4, "y":2.125},
+        {"x":5, "y":2.25},
+
+        {"x":8, "y":2.25},
+        {"x":9, "y":2.125},
+        {"x":10, "y":2},
+        {"x":11, "y":2.125},
+        {"x":12, "y":2.25},
+        {"x":13, "y":2.375},
+
+        {"x":3.5, "y":4.75},
+        {"x":4.5, "y":4.75},
+        {"x":5.5, "y":3.75, "h":2},
+
+        {"x":7.5, "y":3.75, "h":2},
+        {"x":8.5, "y":4.75},
+        {"x":9.5, "y":4.75}
+      ]
+    }
+  }
+}

keyboards/infinity60/infinity60.h

@@ -14,16 +14,14 @@ GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
-#ifndef KEYMAP_COMMON_H
-#define KEYMAP_COMMON_H
+#pragma once
 
 #include "quantum.h"
 
-#define LAYOUT_60_ansi_split_bs_rshift KEYMAP
-
 #ifdef INFINITY_PROTOTYPE
+
 /* Infinity prototype */
-#define KEYMAP( \
+#define LAYOUT_60_ansi_split_bs_rshift( \
     K00, K10, K20, K30, K40, K50, K60, K70, K80, K01, K11, K21, K31, K41, K86, \
     K51, K61, K71, K81, K02, K12, K22, K32, K42, K52, K62, K72, K82, K03, \
     K13, K23, K33, K43, K53, K63, K73, K83, K04, K14, K24, K34, K44, \
@@ -44,7 +42,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #else
 
 /* Infinity production */
-#define KEYMAP( \
+#define LAYOUT_60_ansi_split_bs_rshift( \
     K00, K10, K20, K30, K40, K50, K60, K70, K80, K01, K11, K21, K31, K41, K51, \
     K61, K71, K81, K02, K12, K22, K32, K42, K52, K62, K72, K82, K03, K13, \
     K23, K33, K43, K53, K63, K73, K83, K04, K14, K24, K34, K44, K54, \
@@ -64,4 +62,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #endif
 
-#endif

keyboards/infinity60/info.json

@@ -0,0 +1,78 @@
+{
+  "keyboard_name": "Infinity 60%",
+  "keyboard_folder": "infinity60",
+  "url": "https://input.club/devices/infinity-keyboard/",
+  "maintainer": "qmk",
+  "width": 15,
+  "height": 5,
+  "layouts": {
+    "LAYOUT_60_ansi_split_bs_rshift": {
+      "key_count": 63,
+      "layout": [
+        {"label":"Esc", "x":0, "y":0},
+        {"label":"1", "x":1, "y":0},
+        {"label":"2", "x":2, "y":0},
+        {"label":"3", "x":3, "y":0},
+        {"label":"4", "x":4, "y":0},
+        {"label":"5", "x":5, "y":0},
+        {"label":"6", "x":6, "y":0},
+        {"label":"7", "x":7, "y":0},
+        {"label":"8", "x":8, "y":0},
+        {"label":"9", "x":9, "y":0},
+        {"label":"0", "x":10, "y":0},
+        {"label":"-", "x":11, "y":0},
+        {"label":"=", "x":12, "y":0},
+        {"label":"\\", "x":13, "y":0},
+        {"label":"`", "x":14, "y":0},
+        {"label":"Tab", "x":0, "y":1, "w":1.5},
+        {"label":"Q", "x":1.5, "y":1},
+        {"label":"W", "x":2.5, "y":1},
+        {"label":"E", "x":3.5, "y":1},
+        {"label":"R", "x":4.5, "y":1},
+        {"label":"T", "x":5.5, "y":1},
+        {"label":"Y", "x":6.5, "y":1},
+        {"label":"U", "x":7.5, "y":1},
+        {"label":"I", "x":8.5, "y":1},
+        {"label":"O", "x":9.5, "y":1},
+        {"label":"P", "x":10.5, "y":1},
+        {"label":"[", "x":11.5, "y":1},
+        {"label":"]", "x":12.5, "y":1},
+        {"label":"Backspace", "x":13.5, "y":1, "w":1.5},
+        {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+        {"label":"A", "x":1.75, "y":2},
+        {"label":"S", "x":2.75, "y":2},
+        {"label":"D", "x":3.75, "y":2},
+        {"label":"F", "x":4.75, "y":2},
+        {"label":"G", "x":5.75, "y":2},
+        {"label":"H", "x":6.75, "y":2},
+        {"label":"J", "x":7.75, "y":2},
+        {"label":"K", "x":8.75, "y":2},
+        {"label":"L", "x":9.75, "y":2},
+        {"label":";", "x":10.75, "y":2},
+        {"label":"'", "x":11.75, "y":2},
+        {"label":"Enter", "x":12.75, "y":2, "w":2.25},
+        {"label":"Shift", "x":0, "y":3, "w":2.25},
+        {"label":"Z", "x":2.25, "y":3},
+        {"label":"X", "x":3.25, "y":3},
+        {"label":"C", "x":4.25, "y":3},
+        {"label":"V", "x":5.25, "y":3},
+        {"label":"B", "x":6.25, "y":3},
+        {"label":"N", "x":7.25, "y":3},
+        {"label":"M", "x":8.25, "y":3},
+        {"label":",", "x":9.25, "y":3},
+        {"label":".", "x":10.25, "y":3},
+        {"label":"/", "x":11.25, "y":3},
+        {"label":"Shift", "x":12.25, "y":3, "w":1.75},
+        {"label":"Fn", "x":14, "y":3},
+        {"label":"Ctrl", "x":0, "y":4, "w":1.5},
+        {"label":"GUI", "x":1.5, "y":4},
+        {"label":"Alt", "x":2.5, "y":4, "w":1.5},
+        {"label":"Space", "x":4, "y":4, "w":6},
+        {"label":"Alt", "x":10, "y":4, "w":1.5},
+        {"label":"GUI", "x":11.5, "y":4},
+        {"label":"Fn", "x":12.5, "y":4},
+        {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}
+      ]
+    }
+  }
+}

keyboards/infinity60/keymaps/default/keymap.c

@@ -1,11 +1,11 @@
-#include "infinity60.h"
+#include QMK_KEYBOARD_H
 
 const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* Layer 0: Default Layer
      * ,-----------------------------------------------------------.
-     * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  `|BSp|
+     * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  \|  `|
      * |-----------------------------------------------------------|
-     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]| Bksp|
      * |-----------------------------------------------------------|
      * |Contro|  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Enter   |
      * |-----------------------------------------------------------|
@@ -14,7 +14,7 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * |     |Gui|Alt  |         Space         |Alt  |Gui|   |     |
      * `-----------------------------------------------------------'
      */
-    [0] = KEYMAP(
+    [0] = LAYOUT_60_ansi_split_bs_rshift(
       KC_ESC, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL, KC_BSLS, KC_GRV, \
       KC_TAB, KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,KC_BSPC, \
       KC_LCTL,KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,KC_ENT,  \
@@ -34,7 +34,7 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * |     |Gui|Alt  |         Space         |Alt  |Gui|   |     |
      * `-----------------------------------------------------------'
      */ 
-    [1] = KEYMAP(
+    [1] = LAYOUT_60_ansi_split_bs_rshift(
       KC_PWR, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL,   \
       KC_CAPS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS, KC_UP, KC_TRNS, KC_BSPC,      \
       KC_TRNS,KC_VOLD,KC_VOLU,KC_MUTE,KC_TRNS,KC_TRNS,KC_PAST,KC_PSLS,KC_HOME,KC_PGUP,KC_LEFT,KC_RGHT,KC_PENT,            \

keyboards/infinity60/keymaps/depariel/keymap.c

@@ -1,4 +1,4 @@
-#include "infinity60.h"
+#include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* Layer 0: Default Layer
@@ -14,7 +14,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * |Fn2 |Gui |Alt |         Space           |RAlt|Prv|PlPs|Next|
      * `-----------------------------------------------------------'
      */
-    [0] = KEYMAP(
+    [0] = LAYOUT_60_ansi_split_bs_rshift(
         KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,            KC_BSLS,  KC_GRV, \
         KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,           KC_BSPC, \
         KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, LT(5, KC_ENT),  \
@@ -23,7 +23,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
     /* Layer 1: "Toggle" off SpaceFn for League of Legends
      */
-    [1] = KEYMAP(
+    [1] = LAYOUT_60_ansi_split_bs_rshift(
         KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS,  KC_GRV, \
         KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC, \
         KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  \
@@ -32,7 +32,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
            
     /* Layer 2: "Toggle" off SpaceFn for MapleRoyals
      */
-    [2] = KEYMAP(
+    [2] = LAYOUT_60_ansi_split_bs_rshift(
         KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS,  KC_GRV, \
         KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC, \
         KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  \
@@ -41,7 +41,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
     /* Layer 3: FN layer 1
      */ 
-    [3] = KEYMAP(
+    [3] = LAYOUT_60_ansi_split_bs_rshift(
         KC_NO,           KC_F1,   KC_F2,   KC_F3,   KC_F4,          KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NO,   KC_NO,   \
         KC_NO,           KC_BTN1, KC_MS_U, KC_BTN2, LALT(KC_F4),    KC_HOME, KC_PGUP, KC_PSCR, KC_SLCK, KC_UP,   KC_NO,   KC_LPRN, KC_RPRN, KC_DEL,      \
         MO(6),           KC_MS_L, KC_MS_D, KC_MS_R, KC_NO,          KC_END,  KC_PGDN, KC_TILD, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO,   KC_NO,           \
@@ -50,7 +50,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     
     /* Layer 4: FN layer 2
      */ 
-    [4] = KEYMAP(
+    [4] = LAYOUT_60_ansi_split_bs_rshift(
         KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_PMNS, KC_PPLS, KC_PSLS, TG(2),   \
         KC_CAPS, KC_NO,   KC_UP,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_PSCR, KC_NO,   KC_P7,   KC_P8,   KC_P9,   KC_PAST, KC_BSPC,      \
         KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_P4,   KC_P5,   KC_P6,   KC_PENT,           \
@@ -59,7 +59,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     
     /* Layer 5: FN layer 3
      */ 
-    [5] = KEYMAP(
+    [5] = LAYOUT_60_ansi_split_bs_rshift(
         KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,            KC_NO,   KC_NO,   \
         KC_TAB , KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_F13,  KC_F14,  KC_F15,  KC_F16,  KC_NO,            KC_TRNS,      \
         KC_TRNS, KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_F17,  KC_F18,  KC_F19,  KC_F20,  LT(5, KC_ENT),           \
@@ -68,7 +68,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     
     /* Layer 6: FN layer 4
      */ 
-    [6] = KEYMAP(
+    [6] = LAYOUT_60_ansi_split_bs_rshift(
         KC_NO,                 KC_NO,            KC_NO,          KC_NO,            KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   \
         LCTL(LSFT(KC_TAB)),    KC_NO,            LGUI(KC_UP),    KC_NO,            KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,      \
         MO(6),                 LGUI(KC_LEFT),    LGUI(KC_DOWN),  LGUI(KC_RGHT),    KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,       \

keyboards/infinity60/keymaps/hasu/keymap.c

@@ -1,4 +1,4 @@
-#include "infinity60.h"
+#include QMK_KEYBOARD_H
 
 const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* Layer 0: Default Layer
@@ -14,7 +14,7 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * |     |Gui|Alt  |         Space         |Alt  |Gui|   |     |
      * `-----------------------------------------------------------'
      */
-    [0] = KEYMAP(
+    [0] = LAYOUT_60_ansi_split_bs_rshift(
         KC_ESC,    KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,           KC_MINS,KC_EQL, KC_BSLS,KC_GRV, \
         KC_TAB,    KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,           KC_LBRC,KC_RBRC,KC_BSPC, \
         KC_LCTL,   KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   LT(3, KC_SCLN), KC_QUOT,MT(KC_RCTL, KC_ENT), \
@@ -34,7 +34,7 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * |     |Gui|Alt  |         Space         |Alt  |Gui|   |     |
      * `-----------------------------------------------------------'
      */ 
-    [1] = KEYMAP(
+    [1] = LAYOUT_60_ansi_split_bs_rshift(
         KC_PWR, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \
         KC_CAPS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS, KC_UP,  KC_TRNS,KC_BSPC, \
         KC_LCTL,KC_VOLD,KC_VOLU,KC_MUTE,KC_TRNS,KC_TRNS,KC_PAST,KC_PSLS,KC_HOME,KC_PGUP,KC_LEFT,KC_RGHT,KC_ENT, \
@@ -54,7 +54,7 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      *       |Gui|Alt  |          Space        |Alt  |Gui|
      *       `-------------------------------------------'
      */
-    [2] = KEYMAP(
+    [2] = LAYOUT_60_ansi_split_bs_rshift(
         KC_GRV, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10,         KC_F11, KC_F12, KC_INS, KC_DEL, \
         KC_TAB, KC_HOME,KC_PGDN,KC_UP,  KC_PGUP,KC_END, KC_HOME,KC_PGDN,KC_PGUP,KC_END, KC_NO,          KC_NO,  KC_NO,  KC_BSPC, \
         KC_LCTL,KC_NO,  KC_LEFT,KC_DOWN,KC_RGHT,KC_NO,  KC_LEFT,KC_DOWN,KC_UP,  KC_RGHT,KC_NO,          KC_NO,  KC_ENT, \
@@ -75,7 +75,7 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      *      `--------------------------------------------'
      * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
      */
-    [3] = KEYMAP(
+    [3] = LAYOUT_60_ansi_split_bs_rshift(
         KC_GRV,       KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,          KC_F9,          KC_F10,         KC_F11,         KC_F12,        KC_INS, KC_DEL, \
         LALT(KC_TAB), KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_WH_L,KC_WH_D,KC_MS_U,        KC_WH_U,        KC_WH_R,        ALT_T(KC_LEFT), ALT_T(KC_RGHT),LALT(KC_TAB), \
         KC_LCTL,      KC_ACL0,KC_ACL1,KC_ACL2,KC_ACL2,KC_NO,  KC_NO,  KC_MS_L,KC_MS_D,        KC_MS_R,        LT(3, KC_SCLN), KC_NO,          KC_ENT, \
@@ -96,7 +96,7 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      *      `--------------------------------------------'
      * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
      */
-    [4] = KEYMAP(
+    [4] = LAYOUT_60_ansi_split_bs_rshift(
         KC_GRV,       KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,         KC_F9,         KC_F10, KC_F11, KC_F12, KC_INS,       KC_DEL, \
         LALT(KC_TAB), KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_WH_L,KC_WH_D,KC_MS_U,       KC_WH_U,       KC_WH_R,KC_BTN4,KC_BTN5,LALT(KC_TAB), \
         KC_LCTL,      KC_VOLD,KC_VOLU,KC_MUTE,KC_NO,  KC_NO,  KC_NO,  KC_MS_L,KC_MS_D,       KC_MS_R,       KC_BTN1,KC_NO,  KC_ENT, \

keyboards/infinity60/keymaps/jpetermans/config.h

@@ -1,11 +1,6 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-
-#include "../../config.h"
+#pragma once
 
 //overrides
 #undef TAPPING_TOGGLE
 #define TAPPING_TOGGLE 2
 
-#endif

keyboards/infinity60/keymaps/jpetermans/keymap.c

@@ -1,9 +1,6 @@
-#include "infinity60.h"
+#include QMK_KEYBOARD_H
 #include "led_controller.h"
 
-//Helpful Defines
-#define _______ KC_TRNS
-
 //Define Layer Names
 #define _BASE 0
 #define _NUMPAD 1
@@ -54,7 +51,7 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * `-----------------------------------------------------------'
      */
     /* default */
-    [_BASE] = KEYMAP( \
+    [_BASE] = LAYOUT_60_ansi_split_bs_rshift( \
         KC_ESC,    KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL, KC_BSLS,KC_NO,\
         KC_TAB,    KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,KC_BSPC,   \
         TT(_FNAV), KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,KC_ENT,         \
@@ -63,7 +60,7 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     ),
 
     /* numpad */
-    [_NUMPAD] = KEYMAP( \
+    [_NUMPAD] = LAYOUT_60_ansi_split_bs_rshift( \
         _______,_______,_______,_______,_______,_______,_______, KC_P7, KC_P8, KC_P9, KC_PSLS, _______,_______,_______,KC_NO,\
         _______,_______,_______,_______,_______,_______,_______, KC_P4, KC_P5, KC_P6, KC_PAST, _______,_______,_______, \
         MO(_FNAV),_______,_______,_______,_______,_______,_______, KC_P1, KC_P2, KC_P3, KC_PMNS, _______,_______,      \
@@ -72,7 +69,7 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     ),
 
     /* F-, arrow, and media keys */
-    [_FNAV] = KEYMAP( \
+    [_FNAV] = LAYOUT_60_ansi_split_bs_rshift( \
         KC_GRV, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, _______,KC_NO,\
         KC_CAPS,_______,_______,_______,_______,_______,_______,KC_PGUP,KC_UP,KC_PGDN,KC_PSCR,_______,_______,KC_DEL,  \
         _______,_______,KC_BTN2,_______,_______,_______,KC_HOME,KC_LEFT,KC_DOWN,KC_RGHT,KC_INS,_______,_______,     \
@@ -81,7 +78,7 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     ),
 
     /* media */
-    [_MEDIA] = KEYMAP( \
+    [_MEDIA] = LAYOUT_60_ansi_split_bs_rshift( \
         _______,F(MODE_SINGLE),F(MODE_PAGE),F(MODE_FLASH),_______,_______,_______, _______, _______, _______,KC_MUTE, KC_VOLD, KC_VOLU,_______,KC_NO,\
         _______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,_______,_______,\
         _______,_______,_______,_______,_______,F(GAME),_______, _______, _______, _______,_______, _______,_______,     \
@@ -89,7 +86,7 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         _______,_______,_______,               KC_MPLY,             _______,_______, _______,_______      \
     ),
     /* ~ */
-    [_TILDE] = KEYMAP( \
+    [_TILDE] = LAYOUT_60_ansi_split_bs_rshift( \
         KC_GRV,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,_______,_______,KC_NO,\
         _______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,_______,_______,\
         _______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,_______,     \
@@ -97,7 +94,7 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         _______,_______,_______,               _______,             _______,_______, _______,_______      \
     ),
     /* template */
-    [5] = KEYMAP( \
+    [5] = LAYOUT_60_ansi_split_bs_rshift( \
         _______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,_______,_______,KC_NO,\
         _______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,_______,_______,\
         _______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______, _______,_______,     \

keyboards/infinity60/keymaps/jpetermans/rules.mk

@@ -1,4 +0,0 @@
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/infinity60/matrix.c

@@ -177,3 +177,22 @@ void matrix_print(void)
         xprintf("\n");
     }
 }
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+

keyboards/infinity60/readme.md

@@ -11,4 +11,5 @@ Make example for this keyboard (after setting up your build environment):
 
     make infinity60:default
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+

keyboards/jd40/keymaps/default/keymap.c

@@ -1,5 +1,4 @@
 #include QMK_KEYBOARD_H
-#include "action_layer.h"
 
 #define _BL 0
 #define _AL 1
@@ -7,189 +6,48 @@
 #define _UL 3
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [_BL] = LAYOUT_kc(
-        F12, Q, W, E, R, T, Y, U, I, O, P, BSPC,
-        TAB, A, S, D, F, G, H, J, K, L, ENT,
-        LSFT, Z, X, C, V, B, N, M, COMM, UP, DOT,
-        LCTL, LGUI, LALT, FN0, SPC, SPC, FN0, LEFT, DOWN, RIGHT),
+    [_BL] = LAYOUT(
+        KC_F12,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+        KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_ENT,
+        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_UP,   KC_DOT,
+        KC_LCTL, KC_LGUI, KC_LALT, MO(_AL), KC_SPC,  KC_SPC,  MO(_AL), KC_LEFT, KC_DOWN, KC_RGHT
+    ),
 
-    [_AL] = LAYOUT_kc(
-        GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, DEL,
-        CAPS, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0,
-        TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, SCLN, PGUP, QUOT,
-        TRNS, TRNS, TRNS, TRNS, FN3, FN3, TRNS, HOME, PGDN, END),
+    [_AL] = LAYOUT(
+        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_DEL,
+        KC_CAPS, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,
+        _______, _______, _______, _______, _______, _______, _______, _______, KC_SCLN, KC_PGUP, KC_QUOT,
+        _______, _______, _______, _______, TG(_UL), TG(_UL), _______, KC_HOME, KC_PGDN, KC_END
+    ),
 
-    [_FL] = LAYOUT_kc(
-        TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
-        TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
-        TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
-        TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS),
+    [_FL] = LAYOUT(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+    ),
 
-    [_UL] = LAYOUT_kc(
-        TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
-        TRNS, FN4, FN5, FN11, FN10, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
-        TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
-        TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS),
+    [_UL] = LAYOUT(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, RGB_TOG, RGB_MOD, RGB_VAD, RGB_VAI, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+    ),
 };
 
-enum function_id
-{
-    RGBLED_TOGGLE,
-    RGBLED_STEP_MODE,
-    RGBLED_INCREASE_HUE,
-    RGBLED_DECREASE_HUE,
-    RGBLED_INCREASE_SAT,
-    RGBLED_DECREASE_SAT,
-    RGBLED_INCREASE_VAL,
-    RGBLED_DECREASE_VAL,
-    SHIFT_ESC,
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-    [0] = ACTION_LAYER_MOMENTARY(1),         // Momentary Fn overlay
-    [1] = ACTION_LAYER_TOGGLE(2),            // Toggle Arrow Layer overlay
-    [2] = ACTION_LAYER_TAP_KEY(2, KC_CAPS),  // Tap to toggle caps lock and hold to activate function layer
-    [3] = ACTION_LAYER_TOGGLE(3),            // Toggle Underglow Layer overlay
-    [4] = ACTION_FUNCTION(RGBLED_TOGGLE),    //Turn on/off underglow
-    [5] = ACTION_FUNCTION(RGBLED_STEP_MODE), // Change underglow mode
-    [6] = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
-    [7] = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
-    [8] = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
-    [9] = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
-    [10] = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
-    [11] = ACTION_FUNCTION(RGBLED_DECREASE_VAL),
-    [12] = ACTION_FUNCTION(SHIFT_ESC),
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-    // MACRODOWN only works in this function
-    switch (id)
-    {
-    case 0:
-        if (record->event.pressed)
-        {
-            register_code(KC_RSFT);
-        }
-        else
-        {
-            unregister_code(KC_RSFT);
-        }
-        break;
-    }
-    return MACRO_NONE;
-};
-
-void matrix_scan_user(void)
-{
-
-    // Layer LED indicators
-    // ESC led on when in function layer, WASD cluster leds enabled when on arrow cluster
-    uint32_t layer = layer_state;
-    if (layer & (1 << 1))
-    {
-        //gh60_wasd_leds_on();
-    }
-    else
-    {
-        //gh60_wasd_leds_off();
-    }
-
-    if (layer & (1 << 2))
-    {
-        //gh60_esc_led_on();
-    }
-    else
-    {
-        //gh60_esc_led_off();
-    }
-};
-
-#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-    switch (id)
-    {
-    case RGBLED_TOGGLE:
-        //led operations
-        if (record->event.pressed)
-        {
-            rgblight_toggle();
-        }
-        break;
-    case RGBLED_INCREASE_HUE:
-        if (record->event.pressed)
-        {
-            rgblight_increase_hue();
-        }
-        break;
-    case RGBLED_DECREASE_HUE:
-        if (record->event.pressed)
-        {
-            rgblight_decrease_hue();
-        }
-        break;
-    case RGBLED_INCREASE_SAT:
-        if (record->event.pressed)
-        {
-            rgblight_increase_sat();
-        }
-        break;
-    case RGBLED_DECREASE_SAT:
-        if (record->event.pressed)
-        {
-            rgblight_decrease_sat();
-        }
-        break;
-    case RGBLED_INCREASE_VAL:
-        if (record->event.pressed)
-        {
-            rgblight_increase_val();
-        }
-        break;
-    case RGBLED_DECREASE_VAL:
-        if (record->event.pressed)
-        {
-            rgblight_decrease_val();
-        }
-        break;
-    case RGBLED_STEP_MODE:
-        if (record->event.pressed)
-        {
-            rgblight_step();
-        }
-        break;
-        static uint8_t shift_esc_shift_mask;
-    // Shift + ESC = ~
-    case SHIFT_ESC:
-        shift_esc_shift_mask = get_mods() & MODS_CTRL_MASK;
-        if (record->event.pressed)
-        {
-            if (shift_esc_shift_mask)
-            {
-                add_key(KC_GRV);
-                send_keyboard_report();
-            }
-            else
-            {
-                add_key(KC_ESC);
-                send_keyboard_report();
-            }
-        }
-        else
-        {
-            if (shift_esc_shift_mask)
-            {
-                del_key(KC_GRV);
-                send_keyboard_report();
-            }
-            else
-            {
-                del_key(KC_ESC);
-                send_keyboard_report();
-            }
-        }
-        break;
-    }
+void matrix_scan_user(void) {
+  // Layer LED indicators
+  // ESC led on when in function layer, WASD cluster leds enabled when on arrow cluster
+  uint32_t layer = layer_state;
+  if (layer & (1 << 1)) {
+      //gh60_wasd_leds_on();
+  } else {
+      //gh60_wasd_leds_off();
+  }
+
+  if (layer & (1 << 2)) {
+      //gh60_esc_led_on();
+  } else {
+      //gh60_esc_led_off();
+  }
 };

keyboards/jd40/readme.md

@@ -5,10 +5,10 @@ A compact 40% keyboard.
 
 Keyboard Maintainer: QMK Community  
 Hardware Supported: JD40 PCB  
-Hardware Availability: [1up](https://1upkeyboards.com/jd40-mkii-1up-keyboards-logo-pcb.html) [mechanicalkeyboards.com](https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=2452) [originative](https://www.originativeco.com/products/jd40-pcb)
+Hardware Availability: [1upkeyboards](https://www.1upkeyboards.com/shop/controllers/jd40-mkii-1up-keyboards-logo-pcb/), [mechanicalkeyboards.com](https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=2452), [originative](https://www.originativeco.com/products/jd40-pcb)
 
 Make example for this keyboard (after setting up your build environment):
 
     make jd40:default
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/kbd6x/keymaps/othi/config.h

@@ -0,0 +1,10 @@
+#pragma once
+#define ONESHOT_TAP_TOOGLE 2
+#define ONESHOT_TIMEOUT 2000
+// tap dance configurations
+#define TAPPING_TERM 200
+#define TAPPING_TOGGLE 2
+#define PERMISSIVE_HOLD
+// Fix KC_GESC conflict with Cmd+Alt+Esc on macros
+#define GRAVE_ESC_GUI_OVERRIDE
+

keyboards/kbd6x/keymaps/othi/keymap.c

@@ -0,0 +1,190 @@
+/* Copyright 2018 Othi
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// read README.md for rundown of what does what
+
+// #define BL 0
+#define CL 0
+#define NM_MODE 2
+#define VI_MODE 3
+#define FN3 4
+#define ACCENT 5
+#define ACCENT_CAP 6
+
+//Unicode keymaps
+void eeconfig_init_user(void) {
+  set_unicode_input_mode(UC_LNX);
+}
+#define DE_AE     UC(0x00E4)
+#define DE_SS     UC(0x00DF)
+#define DE_OE     UC(0x00F6)
+#define DE_UE     UC(0x00FC)
+#define DE_AE_CAP UC(0x00C4)
+#define DE_OE_CAP UC(0x00D6)
+#define DE_UE_CAP UC(0x00DC)
+
+uint32_t layer_state_set_user(uint32_t state) {
+    switch (biton32(state)) {
+    case NM_MODE:
+        rgblight_setrgb (0x00,  0x66, 0x00);
+        break;
+    case VI_MODE:
+        rgblight_setrgb (0x66,  0x66, 0x00);
+        break;
+    case ACCENT:
+        rgblight_setrgb (0x7A,  0x00, 0xFF);
+        break;
+    case ACCENT_CAP:
+        rgblight_setrgb (0x7A,  0xFF, 0xFF);
+        break;
+    default: //  for any other layers, or the default layer
+        rgblight_setrgb (0xFF,  0x00, 0x00);
+        break;
+    }
+  return state;
+}
+
+//Tap Dance Declarations
+enum {
+  CTL_NM = 0,
+  ALT_NM = 1,
+  SFT_NM = 2,
+  GUI_NM = 3
+};
+
+void dance_CTL_NM_finished (qk_tap_dance_state_t *state, void *user_data) {
+  if (state->count == 1) {
+	set_oneshot_mods(MOD_LCTL);
+  } else {
+    register_code (KC_LCTL);
+	layer_on(NM_MODE);
+  }
+}
+
+void dance_CTL_NM_reset (qk_tap_dance_state_t *state, void *user_data) {
+  if (state->count == 1) {
+    unregister_code (KC_LCTL);
+  } else {
+    unregister_code (KC_LCTL);
+	layer_off(NM_MODE);
+  }
+}
+
+void dance_GUI_NM_finished (qk_tap_dance_state_t *state, void *user_data) {
+  if (state->count == 1) {
+	register_code (KC_LGUI);
+  } else {
+    register_code (KC_LGUI);
+	layer_on(NM_MODE);
+  }
+}
+
+void dance_GUI_NM_reset (qk_tap_dance_state_t *state, void *user_data) {
+  if (state->count == 1) {
+    unregister_code (KC_LGUI);
+  } else {
+    unregister_code (KC_LGUI);
+	layer_off(NM_MODE);
+  }
+}
+
+void dance_ALT_NM_finished (qk_tap_dance_state_t *state, void *user_data) {
+  if (state->count == 1) {
+	register_code (KC_LALT);
+  } else {
+    register_code (KC_LALT);
+	layer_on(NM_MODE);
+  }
+}
+
+void dance_ALT_NM_reset (qk_tap_dance_state_t *state, void *user_data) {
+  if (state->count == 1) {
+    unregister_code (KC_LALT);
+  } else {
+    unregister_code (KC_LALT);
+	layer_off(NM_MODE);
+  }
+}
+
+void dance_SFT_NM_finished (qk_tap_dance_state_t *state, void *user_data) {
+  if (state->count == 1) {
+	register_code (KC_LSFT);
+	set_oneshot_mods(MOD_LSFT);
+  } else {
+    register_code (KC_LSFT);
+	layer_on(NM_MODE);
+  }
+}
+
+void dance_SFT_NM_reset (qk_tap_dance_state_t *state, void *user_data) {
+  if (state->count == 1) {
+    unregister_code (KC_LSFT);
+  } else {
+    unregister_code (KC_LSFT);
+	layer_off(NM_MODE);
+  }
+}
+
+
+qk_tap_dance_action_t tap_dance_actions[] = {
+ [CTL_NM] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, dance_CTL_NM_finished, dance_CTL_NM_reset),
+ [GUI_NM] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, dance_GUI_NM_finished, dance_GUI_NM_reset),
+ [ALT_NM] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, dance_ALT_NM_finished, dance_ALT_NM_reset),
+ [SFT_NM] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, dance_SFT_NM_finished, dance_SFT_NM_reset)
+};
+
+// backup
+// old R3 capslock, LT(NM_MODE,KC_BSPC),
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [CL] = LAYOUT(
+      KC_GESC, 					 KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS,        KC_EQL,     KC_BSLS,    KC_DEL,
+      MT(MOD_LGUI,KC_TAB),       LT(NM_MODE,KC_Q),    KC_W,    LT(ACCENT,KC_F),    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN,     KC_LBRC, KC_RBRC, KC_BSPC,
+      MT(MOD_LCTL,KC_BSPC),      KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,           KC_QUOT, KC_ENT,
+      TD(SFT_NM),                KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    MT(MOD_LCTL,KC_COMM), MT(MOD_LSFT,KC_DOT),  MT(MOD_LALT,KC_SLSH),        LM(CL,MOD_LGUI|MOD_LSFT), TT(NM_MODE),
+      _______, TD(CTL_NM),                     TD(ALT_NM),              		KC_SPC,    LM(CL,MOD_LGUI|MOD_LALT), OSL(ACCENT)    , _______
+      ),
+  [NM_MODE] = LAYOUT(
+      KC_GRV,            KC_MPRV,    KC_MNXT,    KC_MPLY,    KC_END,      _______,     _______,     _______,     _______,     _______,     KC_HOME,    _______,  _______,  RESET, KC_INS,
+      LGUI(KC_TAB),       _______,    LCTL(KC_RGHT),  _______,    _______,    _______,    _______,    KC_UP,    KC_PGUP,    _______,    _______,     _______, TG(CL), KC_DEL,
+      _______,            KC_LEFT,    _______,    KC_RGHT,      _______,    KC_PGDN,    KC_LEFT,   KC_DOWN,   KC_RGHT,     _______,    KC_ENT,  KC_QUOT, KC_LGUI,
+      KC_LSFT,     			_______,    _______,    _______,      _______,    LCTL(KC_LEFT),    _______,    _______,    _______,    _______,    _______,    TG(VI_MODE), TO(CL),
+      _______, TD(CTL_NM),                     TD(ALT_NM),              		KC_SPC,    LM(CL,MOD_LGUI|MOD_LALT), OSL(ACCENT), _______
+      ),
+
+  [VI_MODE] = LAYOUT(
+      KC_GRV,         KC_MPRV,  KC_MNXT, KC_MPLY,    LSFT(KC_END),          KC_F5,     KC_F6,     KC_F7,     KC_F8,     KC_F9,     LSFT(KC_HOME),    KC_F11,  KC_F12,  RESET, KC_INS,
+      LGUI(KC_TAB),     _______,    LSFT(LCTL(KC_RGHT)),  _______,    _______,    _______,    _______,    LSFT(KC_UP),    _______,    _______,    _______,     _______, TG(CL), KC_BSPC,
+      _______,            _______,    _______,    _______,      _______,    _______,    LSFT(LCTL(KC_LEFT)),   LSFT(KC_DOWN),   LSFT(KC_RGHT),     _______,    KC_SCLN,  KC_QUOT, KC_LGUI,
+      KC_LSFT,      	    _______,  _______, _______,      _______,    LSFT(LCTL(KC_LEFT)),    _______,    _______,    _______,    _______,    KC_SLSH,    OSM(MOD_LSFT), TO(CL),
+      _______, TD(CTL_NM),                     TD(ALT_NM),              		KC_SPC,    LM(CL,MOD_LGUI|MOD_LALT), OSL(ACCENT), _______
+      ),
+  [ACCENT] = LAYOUT(
+      _______,       KC_F1,  KC_F2, KC_F3,    KC_F4,     KC_F5,     KC_F6,     KC_F7,     KC_F8,     KC_F9,     KC_F10,    KC_F11,  KC_F12,  _______, _______,
+      _______,         RGB_TOG,    RGB_MODE_PLAIN,  _______,    _______,    _______,    _______,    _______,    DE_UE,    _______,    _______,     _______, _______, _______,
+      _______,            DE_AE,    UC_Z,    DE_SS,      _______,    _______,    _______,   _______,   _______,     _______,    DE_OE,  _______, _______,
+      OSL(ACCENT_CAP),     _______,  _______, _______,      _______,    _______,    _______,    _______,    _______,    _______,        _______, _______, TO(CL),
+      _______,             _______,         _______,            _______,         _______, _______,  _______
+      ),
+  [ACCENT_CAP] = LAYOUT(
+      _______,   _______,  _______, _______,    _______,          _______,     _______,     _______,     _______,     _______,     _______,    _______,  _______,  _______, _______,
+      _______,      _______,    _______,  _______,    _______,    _______,    _______,    _______,    DE_UE_CAP,    _______,    _______,     _______, _______, _______,
+      _______,        DE_AE_CAP,    _______,    DE_SS,      _______,    _______,    _______,   _______,   _______,     _______,    DE_OE_CAP,  _______, TO(CL),
+      _______, 	       _______, _______,      _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______, _______, _______,
+      _______,   _______,         _______,         _______,         _______,   _______,      _______
+      ),
+};
+

keyboards/kbd6x/keymaps/othi/readme.md

@@ -0,0 +1,56 @@
+## Othi's Universal HHKB keymap
+
+### Goals
+- Colemak layout. If you don't use Colemak then you'll need to also change the arrow key bindigns in other layers
+
+- Vim-like navigation layer so you can use vim binding arrowkeys in non-vim environment
+
+- Good modifier support so you don't have to hold 14 modifier keys at the same time
+
+- RGB indicating layer change(only work with plain colors so far, don't put your rgb to pulsing or any non static animation)
+
+### Layers
+- **CL:**
+
+	The base layer, default is Colemak
+
+- **NM_MODE:**
+
+	Vim-like arrowkeys in the home row, it's `LHNE` for *JENK Colemak* and `HJKL` for *QWERTY*
+
+	Also `HOME`, `END` and next/prev word (`Ctrl + Left/Right`) in `0, 4, w, b` like in vim
+
+- **VI_MODE:**
+
+	The same as `NM_MODE` but with `KC_LSFT` held down for mostly highlighting
+
+- **ACCENT + ACCENT_CAP:**
+
+	Function row and Unicode characters
+
+### Modifiers and Tap Dance keys
+**LHS:**
+
+- Any Tap Dance key with the format of `TD(XXX_NM)` act as normal XXX modifier upon hold, but will hold **and** put you to `NM_MODE` when double click hold(a tap before the hold)(eg you can produce `Alt + PgUp` by pressing `Alt + Alt + U`)
+
+- `KC_TAB` acts as both `KC_TAB` on tap and `KC_LGUI` on hold
+
+- R3 CapsLock acts as both `KC_BSPC` on tap and `KC_LCTL` on hold
+
+- Holding `KC_Q` also puts you into `NM_MODE`
+
+- Holding `KC_F` puts you into `VI_MODE` for fast function keys
+
+**RHS:**
+
+- 3 keys `KC_SCLN`, `KC_DOT` and `KC_SLSH` in `CL` layer can also be held down for respectively `KC_LCTL`, `KC_LSFT`, `KC_LALT` for easier 2-hand modifier holding
+
+- Right modifiers hold the selected modifier with `KC_LGUI` at the same time, mainly for i3wm, you can change this to whatever combination you want
+
+### Misc. functionalities
+
+**Unicode:**
+
+- In case the keyboard output the 4-digit codepoint instead of the actual unicode, you need to change the rewrite input mode of the keyboard into the EEPROM(you only have to do this if the EEPROM was cleared or your current machine use another unicode compose method other than IBus/Linux's `Ctrl + Shift + U`). Change the corresponding Input `void eeconfig_init_user(void)`. See [this](https://docs.qmk.fm/#/feature_unicode) for availble input modes.
+
+- **NOTE:** make sure to keep your qmk env up to date with upstream

keyboards/kbd6x/keymaps/othi/rules.mk

@@ -0,0 +1,19 @@
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = yes         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+TAP_DANCE_ENABLE=yes
+

keyboards/miniaxe/matrix.c

@@ -32,9 +32,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "timer.h"
 #include "split_flags.h"
 
-#ifdef RGBLIGHT_ENABLE
-#   include "rgblight.h"
-#endif
 #ifdef BACKLIGHT_ENABLE
 #   include "backlight.h"
     extern backlight_config_t backlight_config;
@@ -55,6 +52,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     static bool debouncing = false;
 #endif
 
+#if defined(USE_I2C) || defined(EH)
+
 #if (MATRIX_COLS <= 8)
 #    define print_matrix_header()  print("\nr/c 01234567\n")
 #    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
@@ -62,6 +61,27 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define ROW_SHIFTER ((uint8_t)1)
 #else
 #    error "Currently only supports 8 COLS"
+#endif
+
+#else // USE_SERIAL
+
+#if (MATRIX_COLS <= 8)
+#    define print_matrix_header()  print("\nr/c 01234567\n")
+#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop(matrix[i])
+#    define ROW_SHIFTER ((uint8_t)1)
+#elif (MATRIX_COLS <= 16)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse16(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop16(matrix[i])
+#    define ROW_SHIFTER ((uint16_t)1)
+#elif (MATRIX_COLS <= 32)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse32(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop32(matrix[i])
+#    define ROW_SHIFTER  ((uint32_t)1)
+#endif
+
 #endif
 static matrix_row_t matrix_debouncing[MATRIX_ROWS];
 
@@ -315,15 +335,39 @@ i2c_error: // the cable is disconnceted, or something else went wrong
 
 #else // USE_SERIAL
 
+
+typedef struct _Serial_s2m_buffer_t {
+    // TODO: if MATRIX_COLS > 8 change to uint8_t packed_matrix[] for pack/unpack
+    matrix_row_t smatrix[ROWS_PER_HAND];
+} Serial_s2m_buffer_t;
+
+volatile Serial_s2m_buffer_t serial_s2m_buffer = {};
+volatile Serial_m2s_buffer_t serial_m2s_buffer = {};
+uint8_t volatile status0 = 0;
+
+SSTD_t transactions[] = {
+    { (uint8_t *)&status0,
+      sizeof(serial_m2s_buffer), (uint8_t *)&serial_m2s_buffer,
+      sizeof(serial_s2m_buffer), (uint8_t *)&serial_s2m_buffer
+  }
+};
+
+void serial_master_init(void)
+{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); }
+
+void serial_slave_init(void)
+{ soft_serial_target_init(transactions, TID_LIMIT(transactions)); }
+
 int serial_transaction(void) {
     int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
 
-    if (serial_update_buffers()) {
+    if (soft_serial_transaction()) {
         return 1;
     }
 
+    // TODO:  if MATRIX_COLS > 8 change to unpack()
     for (int i = 0; i < ROWS_PER_HAND; ++i) {
-        matrix[slaveOffset+i] = serial_slave_buffer[i];
+        matrix[slaveOffset+i] = serial_s2m_buffer.smatrix[i];
     }
     
     #ifdef RGBLIGHT_ENABLE
@@ -332,7 +376,7 @@ int serial_transaction(void) {
     
     #ifdef BACKLIGHT_ENABLE
         // Write backlight level for slave to read
-        serial_master_buffer[SERIAL_BACKLIT_START] = backlight_config.enable ? backlight_config.level : 0;
+        serial_m2s_buffer.backlight_level = backlight_config.enable ? backlight_config.level : 0;
     #endif
 
     return 0;
@@ -375,8 +419,9 @@ void matrix_slave_scan(void) {
         i2c_slave_buffer[I2C_KEYMAP_START+i] = matrix[offset+i];
     }   
 #else // USE_SERIAL
+    // TODO: if MATRIX_COLS > 8 change to pack()
     for (int i = 0; i < ROWS_PER_HAND; ++i) {
-        serial_slave_buffer[i] = matrix[offset+i];
+        serial_s2m_buffer.smatrix[i] = matrix[offset+i];
     }
 #endif
     matrix_slave_scan_user();

keyboards/miuni32/config.h

@@ -161,7 +161,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 
 #define RGB_DI_PIN D0     // The pin your RGB strip is wired to
-#define RGBLED_NUM 7     // Number of LEDs
+#define RGBLED_NUM 17     // Number of LEDs
 #define RGBLIGHT_ANIMATIONS
 #define RGBLIGHT_HUE_STEP 10
 #define RGBLIGHT_SAT_STEP 17

keyboards/miuni32/readme.md

@@ -5,7 +5,7 @@ A compact 30% keyboard.
 
 Keyboard Maintainer: QMK Community  
 Hardware Supported: miuni32 PCB  
-Hardware Availability: https://zealpc.net/products/miuni32
+Hardware Availability: https://bigtuna.io
 
 Make example for this keyboard (after setting up your build environment):
 

keyboards/noxary/x268/info.json

@@ -5,8 +5,82 @@
   "width": 16,
   "height": 5,
   "layouts": {
-      "LAYOUT": {
-          "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
-      }
+    "LAYOUT": {
+      "key_count": 71,
+      "layout": [
+        {"label":"ESC", "x":0, "y":0},
+        {"label":"1", "x":1, "y":0},
+        {"label":"2", "x":2, "y":0},
+        {"label":"3", "x":3, "y":0},
+        {"label":"4", "x":4, "y":0},
+        {"label":"5", "x":5, "y":0},
+        {"label":"6", "x":6, "y":0},
+        {"label":"7", "x":7, "y":0},
+        {"label":"8", "x":8, "y":0},
+        {"label":"9", "x":9, "y":0},
+        {"label":"0", "x":10, "y":0},
+        {"label":"MINUS", "x":11, "y":0},
+        {"label":"EQUAL", "x":12, "y":0},
+        {"label":"BACKSLASH", "x":13, "y":0},
+        {"label":"BACKSPACE", "x":14, "y":0},
+        {"label":"GRAVE", "x":15, "y":0},
+        {"label":"TAB", "x":0, "y":1, "w":1.5},
+        {"label":"Q", "x":1.5, "y":1},
+        {"label":"W", "x":2.5, "y":1},
+        {"label":"E", "x":3.5, "y":1},
+        {"label":"R", "x":4.5, "y":1},
+        {"label":"T", "x":5.5, "y":1},
+        {"label":"Y", "x":6.5, "y":1},
+        {"label":"U", "x":7.5, "y":1},
+        {"label":"I", "x":8.5, "y":1},
+        {"label":"O", "x":9.5, "y":1},
+        {"label":"P", "x":10.5, "y":1},
+        {"label":"LBRACKET", "x":11.5, "y":1},
+        {"label":"RBRACKET", "x":12.5, "y":1},
+        {"label":"BACKSLASH", "x":13.5, "y":1, "w":1.5},
+        {"label":"DELETE", "x":15, "y":1},
+        {"label":"CAPS LOCK", "x":0, "y":2, "w":1.75},
+        {"label":"A", "x":1.75, "y":2},
+        {"label":"S", "x":2.75, "y":2},
+        {"label":"D", "x":3.75, "y":2},
+        {"label":"F", "x":4.75, "y":2},
+        {"label":"G", "x":5.75, "y":2},
+        {"label":"H", "x":6.75, "y":2},
+        {"label":"J", "x":7.75, "y":2},
+        {"label":"K", "x":8.75, "y":2},
+        {"label":"L", "x":9.75, "y":2},
+        {"label":"SEMICOLON", "x":10.75, "y":2},
+        {"label":"QUOTE", "x":11.75, "y":2},
+        {"label":"ISO HASH", "x":12.75, "y":2},
+        {"label":"ENTER", "x":13.75, "y":2, "w":1.25},
+        {"label":"PAGE UP", "x":15, "y":2},
+        {"label":"LSHIFT", "x":0, "y":3, "w":1.25},
+        {"label":"ISO BACKSLASH", "x":1.25, "y":3},
+        {"label":"Z", "x":2.25, "y":3},
+        {"label":"X", "x":3.25, "y":3},
+        {"label":"C", "x":4.25, "y":3},
+        {"label":"V", "x":5.25, "y":3},
+        {"label":"B", "x":6.25, "y":3},
+        {"label":"N", "x":7.25, "y":3},
+        {"label":"M", "x":8.25, "y":3},
+        {"label":"COMMA", "x":9.25, "y":3},
+        {"label":"PERIOD", "x":10.25, "y":3},
+        {"label":"SLASH", "x":11.25, "y":3},
+        {"label":"RSHIFT", "x":12.25, "y":3, "w":1.75},
+        {"label":"UP", "x":14, "y":3},
+        {"label":"PAGE DOWN", "x":15, "y":3},
+        {"label":"LCTRL", "x":0, "y":4, "w":1.25},
+        {"label":"LGUI", "x":1.25, "y":4, "w":1.25},
+        {"label":"LALT", "x":2.5, "y":4, "w":1.25},
+        {"label":"SPACE", "x":3.75, "y":4, "w":6.25},
+        {"label":"LALT", "x":10, "y":4},
+        {"label":"FN", "x":11, "y":4},
+        {"label":"RCTRL", "x":12, "y":4},
+        {"label":"LEFT", "x":13, "y":4},
+        {"label":"DOWN", "x":14, "y":4},
+        {"label":"RIGHT", "x":15, "y":4}
+      ]
+    }
   }
 }
+

keyboards/noxary/x268/keymaps/default/keymap.c

@@ -22,7 +22,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     * |Ctrl|Win |Alt |        Space        |Alt|Mo(1)|Ctrl|Lef|Dow|Rght|
     * `----------------------------------------------------------------'
     */
-    [_BL] = LAYOUT_65_ansi(
+    [_BL] = LAYOUT(
         KC_ESC,  KC_1,    KC_2,    KC_3,   KC_4,    KC_5,  KC_6,    KC_7,    KC_8,    KC_9,    KC_0,     KC_MINS, KC_EQL,  KC_BSLS, KC_BSPC, KC_GRV,
         KC_TAB,  KC_Q,    KC_W,    KC_E,   KC_R,    KC_T,  KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,     KC_LBRC, KC_RBRC,          KC_BSLS, KC_DEL,
         KC_CAPS, KC_A,    KC_S,    KC_D,   KC_F,    KC_G,  KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN,  KC_QUOT, KC_NUHS,          KC_ENT,  KC_PGUP,
@@ -41,7 +41,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     * |    |    |    |      BL_Toggle       |   |   |   |    |Vol-|    |
     * `----------------------------------------------------------------'
     */
-    [_FL1] = LAYOUT_65_ansi(
+    [_FL1] = LAYOUT(
         KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, KC_PSCR, _______,
         RGB_TOG, RGB_VAI, RGB_SAI, RGB_HUI, RESET,   _______, _______, _______, _______, _______, _______, _______, _______,          _______, KC_INS,
         _______, RGB_VAD, RGB_SAD, RGB_HUD, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, KC_HOME,
@@ -60,7 +60,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     * |    |    |    |                      |   |   |   |    |    |    |
     * `----------------------------------------------------------------'
     */
-    [_FL2] = LAYOUT_65_ansi(
+    [_FL2] = LAYOUT(
         _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
         _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
         _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,

keyboards/noxary/x268/x268.h

@@ -18,7 +18,7 @@
 
 #include "quantum.h"
 
-#define LAYOUT_65_ansi( \
+#define LAYOUT( \
 	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \
 	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112,       K114, K115, \
 	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       K214, K215, \

keyboards/planck/keymaps/ishtob/keymap.c

@@ -24,7 +24,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * | Esc  | Caps | Alt  | GUI  |Lower |    Space    |Raise |NumLay| RAlt | Men  | Del  |
  * `-----------------------------------------------------------------------------------'
  */
-[_QWERTY] = LAYOUT_planck_grid(
+[_QWERTY] = LAYOUT_ortho_4x12_wrapper(
   LT_FN(KC_TAB), _________________QWERTY_L1_________________, _________________QWERTY_R1_________________, KC_BSPC,
   KC_LCTL,       _________________QWERTY_L2_________________, _________________QWERTY_R2_________________, CTL_ENT,
   KC_LSFT,       _________________QWERTY_L3_________________, _________________QWERTY_R3_________________, LT_RAI(KC_MINS),
@@ -42,7 +42,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
  * `-----------------------------------------------------------------------------------'
  */
-[_COLEMAK] = LAYOUT_planck_grid(
+[_COLEMAK] = LAYOUT_ortho_4x12_wrapper(
   LT_FN(KC_TAB), _________________COLEMAK_L1________________, _________________COLEMAK_R1________________, KC_BSPC,
   KC_LCTL,       _________________COLEMAK_L2________________, _________________COLEMAK_R2________________, KC_ENT,
   KC_LSFT,       _________________COLEMAK_L3________________, _________________COLEMAK_R3________________, LT_RAI(KC_MINS),
@@ -60,7 +60,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
  * `-----------------------------------------------------------------------------------'
  */
-[_DVORAK] = LAYOUT_planck_grid(
+[_DVORAK] = LAYOUT_ortho_4x12_wrapper(
   LT_FN(KC_TAB), _________________DVORAK_L1_________________, _________________DVORAK_R1_________________, KC_BSPC,
   KC_LCTL,       _________________DVORAK_L2_________________, _________________DVORAK_R2_________________, KC_ENT,
   KC_LSFT,       _________________DVORAK_L3_________________, _________________DVORAK_R3_________________, LT_RAI(KC_MINS),
@@ -78,7 +78,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
  * `-----------------------------------------------------------------------------------'
  */
-[_LOWER] = LAYOUT_planck_grid(
+[_LOWER] = LAYOUT_ortho_4x12_wrapper(
   ________________NUMBER_LEFT________________, ________________NUMBER_RIGHT_______________,    KC_GRV,  KC_BSLS,
   _______, __________________LONG_FUNC_LEFT___________________,   KC_UNDS, KC_EQL,  KC_LBRC, KC_RBRC, KC_PIPE,
   _______, __________________LONG_FUNC_RIGHT__________________,S(KC_NUHS),S(KC_NUBS),KC_LCBR, KC_RCBR, _______,
@@ -96,7 +96,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |      |   0  |      | Left | Down | Right| NumLk|
  * `-----------------------------------------------------------------------------------'
  */
-[_RAISE] = LAYOUT_planck_grid(
+[_RAISE] = LAYOUT_ortho_4x12_wrapper(
   ________________NUMBER_LEFT________________, ________________NUMBER_RIGHT_______________,    KC_PLUS,  KC_BSLS,
   _______, KC_A,    KC_UP,   KC_D,    KC_PSCR,  KC_VOLU, KC_4,    KC_5,    KC_6,    KC_PAST, KC_COLN, KC_QUOT,
   _______, KC_LEFT, KC_DOWN, KC_RIGHT,KC__MUTE, KC_VOLD, KC_1,    KC_2,    KC_3,    KC_UP, KC_SLSH,   _______,
@@ -115,7 +115,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * `-----------------------------------------------------------------------------------'
  */
  
-[_PLOVER] = LAYOUT_planck_grid(
+[_PLOVER] = LAYOUT_ortho_4x12_wrapper(
   KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1   ,
   XXXXXXX, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC,
   XXXXXXX, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
@@ -133,7 +133,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
  * `-----------------------------------------------------------------------------------'
  */
-[_FNLAYER] = LAYOUT_planck_grid(
+[_FNLAYER] = LAYOUT_ortho_4x12_wrapper(
   _______, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PLUS,
   _______, __________________LONG_FUNC_LEFT___________________,   KC_UNDS, KC_EQL,  KC_LBRC, KC_RBRC, KC_QUOT,
   _______, __________________LONG_FUNC_RIGHT__________________,S(KC_NUHS),S(KC_NUBS),KC_LCBR, KC_RCBR, _______,
@@ -151,7 +151,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |      |   0  |   .  | Exit | Vol- | Vol+ | Play |
  * `-----------------------------------------------------------------------------------'
  */
-[_NUMLAY] = LAYOUT_planck_grid(
+[_NUMLAY] = LAYOUT_ortho_4x12_wrapper(
   _______, KC_Q,    KC_UP,   KC_H,     XXXXXXX, XXXXXXX,  KC_P7,   KC_P8,  KC_P9,   KC_MINS,   KC_PLUS,  KC_BSPC,
   _______, KC_LEFT, KC_DOWN, KC_RIGHT, XXXXXXX, XXXXXXX,  KC_P4,  KC_P5,  KC_P6,   KC_PAST, KC_COLN,  KC_ENT,
   _______, KC_Z,    KC_X,    KC_C,     KC_V,    XXXXXXX,  KC_P1,  KC_P2,  KC_P3,   KC_PDOT, KC_PSLS,  _______,
@@ -170,7 +170,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * `-----------------------------------------------------------------------------------'
  */
  
-[_MOUSECURSOR] = LAYOUT_planck_grid(
+[_MOUSECURSOR] = LAYOUT_ortho_4x12_wrapper(
   KC_ACL0, KC_ACL1, KC_ACL2, M_EMAIL,M_EMAIL2, KC_HOME, KC_PGUP, KC_WH_L, KC_MS_U, KC_WH_R, P_MPASS, P_META,
   _______, XXXXXXX, XXXXXXX, XXXXXXX, O_RTQ6H, KC_END , KC_PGDN, KC_MS_L, KC_MS_D, KC_MS_R, _______, O_DAYRN,
   _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, KC_BTN2, KC_BTN3, KC_BTN4, KC_BTN5, _______, _______,
@@ -188,7 +188,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |             |      |      |      |      |      |
  * `-----------------------------------------------------------------------------------'
  */
-[_ADJUST] = LAYOUT_planck_grid(
+[_ADJUST] = LAYOUT_ortho_4x12_wrapper(
   DFU, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, KC_DEL,
   _______, MAGIC_TOGGLE_NKRO, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  PLOVER,  _______,
   _______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  _______, BL_DEC, BL_INC, BL_STEP, BL_TOGG,

keyboards/planck/keymaps/sascha/keymap.c

@@ -26,13 +26,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
          * ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤
          * │ SINS │   ♥  │   ≈  │   ✓  │   ✗  │   ←  │   →  │   €  │   ß  │   Ü  │   Ö  │   Ä  │
          * ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤
-         * │ Powr │ Rset │ BLSt │ Home │ End  │ PgUp │ PgDn │ Left │ Down │  Up  │ Rght │      │
+         * │ Rset │ BLSt │  F1  │ Home │ End  │ PgUp │ PgDn │ Left │ Down │  Up  │ Rght │      │
          * └──────┴──────┴──────┴──────┴──────┴──────┴──────┴──────┴──────┴──────┴──────┴──────┘
          */
         KC_TILD   , KC_1     , KC_2     , KC_3     , KC_4     , KC_5      , KC_6     , KC_7     , KC_8     , KC_9     , KC_0     , KC_DEL,
         KC_GRV    , KC_EXLM  , KC_AT    , KC_HASH  , KC_DLR   , KC_PERC   , KC_CIRC  , KC_AMPR  , KC_ASTR  , UC(L'ü') , UC(L'ö') , UC(L'ä'),
         S(KC_INS) , UC(L'♥') , UC(L'≈') , UC(L'✓') , UC(L'✗') , UC(L'←')  , UC(L'→') , UC(L'€') , UC(L'ß') , UC(L'Ü') , UC(L'Ö') , UC(L'Ä'),
-        KC_PWR    , RESET    , BL_STEP  , KC_HOME  , KC_END   , KC_PGUP   , KC_PGDN  , KC_LEFT  , KC_DOWN  , KC_UP    , KC_RGHT  , KC_TRNS
+        RESET     , BL_STEP  , KC_F1    , KC_HOME  , KC_END   , KC_PGUP   , KC_PGDN  , KC_LEFT  , KC_DOWN  , KC_UP    , KC_RGHT  , KC_TRNS
     )
 };
 

keyboards/planck/keymaps/sascha/rules.mk

@@ -1,5 +1,14 @@
 AUTO_SHIFT_ENABLE = yes
 AUTO_SHIFT_MODIFIERS = yes
-BACKLIGHT_ENABLE = yes
 UNICODE_ENABLE = yes
-DEFAULT_FOLDER = planck/rev5
+
+ifeq ($(strip $(KEYBOARD)), planck/rev5)
+BACKLIGHT_ENABLE = yes
+CONSOLE_ENABLE = no
+endif
+ifeq ($(strip $(KEYBOARD)), planck/rev6)
+BACKLIGHT_ENABLE = no
+CONSOLE_ENABLE = yes
+EXTRALDFLAGS = -Wl,--build-id=none
+UNICODE_ENABLE = yes
+endif

keyboards/redox/info.json

@@ -6,7 +6,92 @@
   "height": 6.25,
   "layouts": {
     "LAYOUT": {
-      "layout": [{"label":"[L2] `", "x":0, "y":0.375, "w":1.25}, {"label":"!", "x":1.25, "y":0.375}, {"label":"@", "x":2.25, "y":0.125}, {"label":"#", "x":3.25, "y":0}, {"label":"$", "x":4.25, "y":0.125}, {"label":"%", "x":5.25, "y":0.25}, {"label":"[L1]", "x":6.25, "y":0.75}, {"label":"[L1]", "x":11.25, "y":0.75}, {"label":"^", "x":12.25, "y":0.25}, {"label":"&", "x":13.25, "y":0.125}, {"label":"*", "x":14.25, "y":0}, {"label":"(", "x":15.25, "y":0.125}, {"label":")", "x":16.25, "y":0.375}, {"label":"[L2] -", "x":17.25, "y":0.375, "w":1.25}, {"label":"Tab", "x":0, "y":1.375, "w":1.25}, {"label":"Q", "x":1.25, "y":1.375}, {"label":"W", "x":2.25, "y":1.125}, {"label":"E", "x":3.25, "y":1}, {"label":"R", "x":4.25, "y":1.125}, {"label":"T", "x":5.25, "y":1.25}, {"label":"[", "x":6.25, "y":1.75, "h":1.5}, {"label":"]", "x":11.25, "y":1.75, "h":1.5}, {"label":"Y", "x":12.25, "y":1.25}, {"label":"U", "x":13.25, "y":1.125}, {"label":"I", "x":14.25, "y":1}, {"label":"O", "x":15.25, "y":1.125}, {"label":"P", "x":16.25, "y":1.375}, {"label":"=", "x":17.25, "y":1.375, "w":1.25}, {"label":"Esc", "x":0, "y":2.375, "w":1.25}, {"label":"A", "x":1.25, "y":2.375}, {"label":"S", "x":2.25, "y":2.125}, {"label":"D", "x":3.25, "y":2}, {"label":"F", "x":4.25, "y":2.125}, {"label":"G", "x":5.25, "y":2.25}, {"label":"PgUp", "x":6.75, "y":3.75}, {"label":"End", "x":10.75, "y":3.75}, {"label":"H", "x":12.25, "y":2.25}, {"label":"J", "x":13.25, "y":2.125}, {"label":"K", "x":14.25, "y":2}, {"label":"L", "x":15.25, "y":2.125}, {"label":":", "x":16.25, "y":2.375}, {"label":"'", "x":17.25, "y":2.375, "w":1.25}, {"label":"Shift", "x":0, "y":3.375, "w":1.25}, {"label":"Z", "x":1.25, "y":3.375}, {"label":"X", "x":2.25, "y":3.125}, {"label":"C", "x":3.25, "y":3}, {"label":"V", "x":4.25, "y":3.125}, {"label":"B", "x":5.25, "y":3.25}, {"label":"PgDn", "x":7.75, "y":3.75}, {"label":"Home", "x":9.75, "y":3.75}, {"label":"N", "x":12.25, "y":3.25}, {"label":"M", "x":13.25, "y":3.125}, {"label":"<", "x":14.25, "y":3}, {"label":">", "x":15.25, "y":3.125}, {"label":"?", "x":16.25, "y":3.375}, {"label":"Shift", "x":17.25, "y":3.375, "w":1.25}, {"label":"GUI", "x":0.25, "y":4.375}, {"label":"+", "x":1.25, "y":4.375}, {"label":"-", "x":2.25, "y":4.125}, {"label":"[Alt] *", "x":3.25, "y":4}, {"label":"[Ctrl] /", "x":5.5, "y":5.25, "w":1.25}, {"label":"Backspace", "x":6.75, "y":4.75, "h":1.5}, {"label":"Del", "x":7.75, "y":4.75, "h":1.5}, {"label":"Enter", "x":9.75, "y":4.75, "h":1.5}, {"label":"Space", "x":10.75, "y":4.75, "h":1.5}, {"label":"Alt", "x":11.75, "y":5.25, "w":1.25}, {"label":"Left", "x":14.25, "y":4}, {"label":"Down", "x":15.25, "y":4.125}, {"label":"Up", "x":16.25, "y":4.375}, {"label":"Right", "x":17.25, "y":4.375}]
+      "layout": [
+        {"label":"_Nav || `", "x":0, "y":0.375, "w":1.25},
+        {"label":"1", "x":1.25, "y":0.375},
+        {"label":"2", "x":2.25, "y":0.125},
+        {"label":"3", "x":3.25, "y":0},
+        {"label":"4", "x":4.25, "y":0.125},
+        {"label":"5", "x":5.25, "y":0.25},
+
+        {"label":"6", "x":12.25, "y":0.25},
+        {"label":"7", "x":13.25, "y":0.125},
+        {"label":"8", "x":14.25, "y":0},
+        {"label":"9", "x":15.25, "y":0.125},
+        {"label":"0", "x":16.25, "y":0.375},
+        {"label":"_Nav || -", "x":17.25, "y":0.375, "w":1.25},
+
+        {"label":"Tab", "x":0, "y":1.375, "w":1.25},
+        {"label":"Q", "x":1.25, "y":1.375},
+        {"label":"W", "x":2.25, "y":1.125},
+        {"label":"E", "x":3.25, "y":1},
+        {"label":"R", "x":4.25, "y":1.125},
+        {"label":"T", "x":5.25, "y":1.25},
+        {"label":"MO(_SYMB)", "x":6.25, "y":0.75},
+
+        {"label":"MO(_SYMB)", "x":11.25, "y":0.75},
+        {"label":"Y", "x":12.25, "y":1.25},
+        {"label":"U", "x":13.25, "y":1.125},
+        {"label":"I", "x":14.25, "y":1},
+        {"label":"O", "x":15.25, "y":1.125},
+        {"label":"P", "x":16.25, "y":1.375},
+        {"label":"=", "x":17.25, "y":1.375, "w":1.25},
+
+        {"label":"Esc", "x":0, "y":2.375, "w":1.25},
+        {"label":"A", "x":1.25, "y":2.375},
+        {"label":"S", "x":2.25, "y":2.125},
+        {"label":"D", "x":3.25, "y":2},
+        {"label":"F", "x":4.25, "y":2.125},
+        {"label":"G", "x":5.25, "y":2.25},
+        {"label":"[", "x":6.25, "y":1.75, "h":1.5},
+
+        {"label":"]", "x":11.25, "y":1.75, "h":1.5},
+        {"label":"H", "x":12.25, "y":2.25},
+        {"label":"J", "x":13.25, "y":2.125},
+        {"label":"K", "x":14.25, "y":2},
+        {"label":"L", "x":15.25, "y":2.125},
+        {"label":";", "x":16.25, "y":2.375},
+        {"label":"'", "x":17.25, "y":2.375, "w":1.25},
+
+        {"label":"Shift", "x":0, "y":3.375, "w":1.25},
+        {"label":"Z", "x":1.25, "y":3.375},
+        {"label":"X", "x":2.25, "y":3.125},
+        {"label":"C", "x":3.25, "y":3},
+        {"label":"V", "x":4.25, "y":3.125},
+        {"label":"B", "x":5.25, "y":3.25},
+
+        {"label":"_Adjust/Page Up", "x":6.75, "y":3.75},
+        {"label":"Page Down", "x":7.75, "y":3.75},
+
+        {"label":"Home", "x":9.75, "y":3.75},
+        {"label":"_Adjust/End", "x":10.75, "y":3.75},
+
+        {"label":"N", "x":12.25, "y":3.25},
+        {"label":"M", "x":13.25, "y":3.125},
+        {"label":",", "x":14.25, "y":3},
+        {"label":",", "x":15.25, "y":3.125},
+        {"label":"\\", "x":16.25, "y":3.375},
+        {"label":"Shift", "x":17.25, "y":3.375, "w":1.25},
+
+        {"label":"LGUI", "x":0.25, "y":4.375},
+        {"label":"P+", "x":1.25, "y":4.375},
+        {"label":"P-", "x":2.25, "y":4.125},
+        {"label":"LAlt || P*", "x":3.25, "y":4},
+
+        {"label":"LCtrl || P/", "x":5.5, "y":5.25, "w":1.25},
+        {"label":"Backspace", "x":6.75, "y":4.75, "h":1.5},
+        {"label":"Delete", "x":7.75, "y":4.75, "h":1.5},
+
+        {"label":"Enter", "x":9.75, "y":4.75, "h":1.5},
+        {"label":"Space", "x":10.75, "y":4.75, "h":1.5},
+        {"label":"RAlt", "x":11.75, "y":5.25, "w":1.25},
+
+        {"label":"Left", "x":14.25, "y":4},
+        {"label":"Down", "x":15.25, "y":4.125},
+        {"label":"Up", "x":16.25, "y":4.375},
+        {"label":"Right", "x":17.25, "y":4.375}
+      ]
     }
   }
 }
+

keyboards/redox/keymaps/jeherve/keymap.c

@@ -25,14 +25,11 @@ enum custom_keycodes {
 	WAVE,
 	YOSHI,
 	THUMB_UP,
-	NBSP
+	NBSP,
+  INV_1P,
+  ALFRED
 };
 
-// Make macros a bit simpler with this shortcut.
-#define TAP_ONCE(code)  \
-  register_code (code); \
-  unregister_code (code)
-
 // Is shift being held? Let's store this in a bool.
 static bool shift_held = false;
 
@@ -40,16 +37,22 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 	switch(keycode) {
 		case SHRUG:
 			if (record->event.pressed) {
-				unicode_input_start(); register_hex(0xaf); unicode_input_finish();
-				TAP_ONCE (KC_BSLS);
-				register_code (KC_RSFT); TAP_ONCE (KC_MINS); TAP_ONCE (KC_9); unregister_code (KC_RSFT);
-				unicode_input_start (); register_hex(0x30c4); unicode_input_finish();
-				register_code (KC_RSFT); TAP_ONCE (KC_0); TAP_ONCE (KC_MINS); unregister_code (KC_RSFT);
-				TAP_ONCE (KC_SLSH);
-				unicode_input_start (); register_hex(0xaf); unicode_input_finish();
+				send_unicode_hex_string("00AF 005C 005F 0028 30C4 0029 005F 002F 00AF");
 			}
 			return false;
 			break;
+    case INV_1P:
+      if (record->event.pressed) {
+        SEND_STRING(SS_DOWN(X_LGUI)SS_DOWN(X_LALT)SS_TAP(X_BSLASH)SS_UP(X_LGUI)SS_UP(X_LALT));
+      }
+      return false;
+      break;
+    case ALFRED:
+      if (record->event.pressed) {
+        SEND_STRING(SS_DOWN(X_LALT)SS_TAP(X_SPACE)SS_UP(X_LALT));
+      }
+      return false;
+      break;
 		case YOSHI:
 			if (record->event.pressed) {
 				SEND_STRING(":yellow_yoshi:");
@@ -125,7 +128,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 };
 
 // Shortcut to make keymap more readable
-#define KC_CTDN  LCTL(KC_DOWN)
 #define KC_SYQT  LT(_SYMB,KC_QUOT)
 #define SYM_L    MO(_SYMB)
 #define MO_INTR  MO(_INTER)
@@ -152,13 +154,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   //┌────────┬────────┬────────┬────────┬────────┬────────┐                                           ┌────────┬────────┬────────┬────────┬────────┬────────┐
      KC_GRV  ,KC_1    ,KC_2    ,KC_3    ,KC_4    ,KC_5    ,                                            KC_6    ,KC_7    ,KC_8    ,KC_9    ,KC_0    ,KC_EQL  ,
   //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐                         ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
-     KC_TAB  ,KC_Q    ,KC_W    ,KC_F    ,KC_P    ,KC_G    ,KC_ESC  ,                          KC_CTDN ,KC_J    ,KC_L    ,KC_U    ,KC_Y    ,KC_SCLN ,KC_BSLS ,
+     KC_TAB  ,KC_Q    ,KC_W    ,KC_F    ,KC_P    ,KC_G    ,KC_ESC  ,                           INV_1P ,KC_J    ,KC_L    ,KC_U    ,KC_Y    ,KC_SCLN ,KC_BSLS ,
   //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
      SYM_L   ,KC_A    ,KC_R    ,KC_S    ,KC_T    ,KC_D    ,M_BRACKET_LEFT,            M_BRACKET_RIGHT ,KC_H    ,KC_N    ,KC_E    ,KC_I    ,KC_O    ,KC_SYQT ,
   //├────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┐       ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┤
      KC_LSFT ,KC_Z    ,KC_X    ,KC_C    ,KC_V    ,KC_B    ,TT(_NAV),TT(_SYMB),      TT(_SYMB),TT(_NAV),KC_K    ,KC_M    ,KC_COMM ,KC_DOT  ,KC_SLSH ,KC_RSFT ,
   //├────────┼────────┼────────┼────────┼────┬───┴────┬───┼────────┼────────┤       ├────────┼────────┼───┬────┴───┬────┼────────┼────────┼────────┼────────┤
-     MO_INTR ,KC_LCTL ,KC_HYPR ,KC_LALT ,     KC_LCMD ,    KC_BSPC ,KC_LCTL ,        KC_ENT  ,KC_SPC  ,    KC_RCMD ,     TT_ADJ  ,KC_HYPR ,KC_RCTL ,MO_INTR
+     MO_INTR ,KC_LCTL ,KC_HYPR ,KC_LALT ,     KC_LCMD ,    KC_BSPC ,KC_LCTL ,        KC_ENT  ,KC_SPC  ,    ALFRED  ,     TT_ADJ  ,KC_HYPR ,KC_RCTL ,MO_INTR
   //└────────┴────────┴────────┴────────┘    └────────┘   └────────┴────────┘       └────────┴────────┘   └────────┘    └────────┴────────┴────────┴────────┘
   ),
 
@@ -170,7 +172,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
      _______ ,KC_EXLM ,KC_AT   ,KC_HASH ,KC_DLR  ,KC_PERC ,KC_LCBR ,                          KC_RCBR ,KC_CIRC ,KC_AMPR ,KC_ASTR ,KC_MINS ,KC_UNDS ,_______ ,
   //├────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┐       ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┤
-     _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,_______ ,_______ ,        _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,_______ ,_______ ,
+     _______ ,_______ ,_______ ,KC_TILD ,KC_GRV , _______ ,_______ ,_______ ,        _______ ,_______ ,_______ ,KC_EQL  ,KC_PLUS ,_______ ,_______ ,_______ ,
   //├────────┼────────┼────────┼────────┼────┬───┴────┬───┼────────┼────────┤       ├────────┼────────┼───┬────┴───┬────┼────────┼────────┼────────┼────────┤
      _______ ,_______ ,_______ ,_______ ,     _______ ,    _______ ,_______ ,        _______ ,_______ ,    _______ ,     _______ ,_______ ,_______ ,_______
   //└────────┴────────┴────────┴────────┘    └────────┘   └────────┴────────┘       └────────┴────────┘   └────────┘    └────────┴────────┴────────┴────────┘
@@ -184,7 +186,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
      XXXXXXX ,XXXXXXX ,KC_VOLD ,KC_VOLU ,KC_MUTE ,XXXXXXX ,_______ ,                          _______ ,XXXXXXX ,KC_LEFT ,KC_DOWN ,KC_UP   ,KC_RIGHT,XXXXXXX ,
   //├────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┐       ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┤
-     XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,_______ ,        _______ ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,
+     XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,_______ ,_______ ,        _______ ,_______ ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,
   //├────────┼────────┼────────┼────────┼────┬───┴────┬───┼────────┼────────┤       ├────────┼────────┼───┬────┴───┬────┼────────┼────────┼────────┼────────┤
      _______ ,XXXXXXX ,XXXXXXX ,XXXXXXX ,     XXXXXXX ,    XXXXXXX ,_______ ,        _______ ,XXXXXXX ,    XXXXXXX ,     _______ ,XXXXXXX ,XXXXXXX ,_______
   //└────────┴────────┴────────┴────────┘    └────────┘   └────────┴────────┘       └────────┴────────┘   └────────┘    └────────┴────────┴────────┴────────┘
@@ -230,8 +232,8 @@ void persistent_default_layer_set(uint16_t default_layer) {
 }
 
 // Set unicode in Mac OS.
-void matrix_init_user(void) {
-	set_unicode_input_mode(UC_OSX);
+void eeconfig_init_user(void) {
+  set_unicode_input_mode(UC_OSX);
 };
 
 // Change LED colors depending on the layer.

keyboards/redox/keymaps/jeherve/readme.md

@@ -1,7 +1,7 @@
 # A Colemak keymap for the Redox keyboard
 
 ----
-![jeherve-redox-layout-3](https://user-images.githubusercontent.com/426388/45171716-69888200-b203-11e8-822d-7bc91f9f6c07.jpg)
+![jeherve-redox-layout-4](https://user-images.githubusercontent.com/426388/50276398-2664be80-0442-11e9-86b9-fbd0f4275354.png)
 
 ----
 
@@ -25,6 +25,11 @@ My keymap uses 5 layers:
 
 ## Changelog
 
+- 2018.12.20
+	- 2 new Macro keys, to invoke [Alfred](https://www.alfredapp.com/) and [1Password](https://1password.com/).
+	- No more Right Command key or Expose key, I didn't use those much.
+	- Updates to use newer QMK function to call ¯\_(ツ)_/¯
+	- Fix: you can now move back to the base layer when double tapping the thumb keys to switch to the Nav layer. 👍
 - 2018.09.06
 	- Initial submission to QMK. It's alive! ⌨️
 

keyboards/s65_plus/info.json

@@ -0,0 +1,92 @@
+{
+  "keyboard_name": "S65-Plus",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 18,
+  "height": 5,
+  "layouts": {
+    "LAYOUT_ansi": {
+      "layout": [
+        {"label":"F1", "x":0, "y":0},
+        {"label":"F2", "x":1, "y":0},
+        {"label":"ESC", "x":2, "y":0},
+        {"label":"1", "x":3, "y":0},
+        {"label":"2", "x":4, "y":0},
+        {"label":"3", "x":5, "y":0},
+        {"label":"4", "x":6, "y":0},
+        {"label":"5", "x":7, "y":0},
+        {"label":"6", "x":8, "y":0},
+        {"label":"7", "x":9, "y":0},
+        {"label":"8", "x":10, "y":0},
+        {"label":"9", "x":11, "y":0},
+        {"label":"0", "x":12, "y":0},
+        {"label":"MINUS", "x":13, "y":0},
+        {"label":"EQUAL", "x":14, "y":0},
+        {"label":"BACKSPACE", "x":15, "y":0, "w":2},
+        {"label":"DELETE", "x":17, "y":0},
+        {"label":"F3", "x":0, "y":1},
+        {"label":"F4", "x":1, "y":1},
+        {"label":"TAB", "x":2, "y":1, "w":1.5},
+        {"label":"Q", "x":3.5, "y":1},
+        {"label":"W", "x":4.5, "y":1},
+        {"label":"E", "x":5.5, "y":1},
+        {"label":"R", "x":6.5, "y":1},
+        {"label":"T", "x":7.5, "y":1},
+        {"label":"Y", "x":8.5, "y":1},
+        {"label":"U", "x":9.5, "y":1},
+        {"label":"I", "x":10.5, "y":1},
+        {"label":"O", "x":11.5, "y":1},
+        {"label":"P", "x":12.5, "y":1},
+        {"label":"LBRACKET", "x":13.5, "y":1},
+        {"label":"RBRACKET", "x":14.5, "y":1},
+        {"label":"BACKSLASH", "x":15.5, "y":1, "w":1.5},
+        {"label":"PAGEUP", "x":17, "y":1},
+        {"label":"F5", "x":0, "y":2},
+        {"label":"F6", "x":1, "y":2},
+        {"label":"CAPSLOCK", "x":2, "y":2, "w":1.75},
+        {"label":"A", "x":3.75, "y":2},
+        {"label":"S", "x":4.75, "y":2},
+        {"label":"D", "x":5.75, "y":2},
+        {"label":"F", "x":6.75, "y":2},
+        {"label":"G", "x":7.75, "y":2},
+        {"label":"H", "x":8.75, "y":2},
+        {"label":"J", "x":9.75, "y":2},
+        {"label":"K", "x":10.75, "y":2},
+        {"label":"L", "x":11.75, "y":2},
+        {"label":"SEMICOLON", "x":12.75, "y":2},
+        {"label":"QUOTE", "x":13.75, "y":2},
+        {"label":"ENTER", "x":14.75, "y":2, "w":2.25},
+        {"label":"PAGEDOWN", "x":17, "y":2},
+        {"label":"F7", "x":0, "y":3},
+        {"label":"F8", "x":1, "y":3},
+        {"label":"LSHIFT", "x":2, "y":3, "w":2.25},
+        {"label":"Z", "x":4.25, "y":3},
+        {"label":"X", "x":5.25, "y":3},
+        {"label":"C", "x":6.25, "y":3},
+        {"label":"V", "x":7.25, "y":3},
+        {"label":"B", "x":8.25, "y":3},
+        {"label":"N", "x":9.25, "y":3},
+        {"label":"M", "x":10.25, "y":3},
+        {"label":"COMMA", "x":11.25, "y":3},
+        {"label":"PERIOD", "x":12.25, "y":3},
+        {"label":"SLASH", "x":13.25, "y":3},
+        {"label":"RSHIFT", "x":14.25, "y":3, "w":1.75},
+        {"label":"UP", "x":16, "y":3},
+        {"label":"END", "x":17, "y":3},
+        {"label":"F9", "x":0, "y":4},
+        {"label":"F10", "x":1, "y":4},
+        {"label":"LCTRL", "x":2, "y":4, "w":1.25},
+        {"label":"LGUI", "x":3.25, "y":4, "w":1.25},
+        {"label":"LALT", "x":4.5, "y":4, "w":1.25},
+        {"label":"SPACE", "x":5.75, "y":4, "w":6.25},
+        {"label":"RALT", "x":12, "y":4},
+        {"label":"FN", "x":13, "y":4},
+        {"label":"RCTRL", "x":14, "y":4},
+        {"label":"LEFT", "x":15, "y":4},
+        {"label":"DOWN", "x":16, "y":4},
+        {"label":"RIGHT", "x":17, "y":4}
+      ]
+    }
+  }
+}
+

keyboards/s65_plus/s65_plus.h

@@ -1,5 +1,4 @@
-#ifndef S60PLUS_H
-#define S60PLUS_H
+#pragma once
 
 #include "quantum.h"
 
@@ -20,4 +19,3 @@
 void matrix_init_user(void);
 void matrix_scan_user(void);
 
-#endif

keyboards/skog/README.md

@@ -0,0 +1,61 @@
+Skog TKL by Percent
+==========================
+
+Keyboard Maintainer: QMK Community  
+Hardware Supported: Skog PCB  
+Hardware Availability: https://geekhack.org/index.php?topic=87953.0
+
+Make example for this keyboard (after setting up your build environment):
+
+    make skog:default
+
+## Setting the board to bootloader mode
+
+If you're lucky, the programming script does this automagically for you. If
+however this doesn't work for you, you need to enter the bootloader mode manually
+by plugging the keyboard in while holding the bootloader key. If you did this
+correctly the LEDs will blink and you'll be able to flash your firmware.
+
+The bootloader key is in the top-right (Pause).
+
+## Flashing
+
+ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. 
+
+Windows: 
+1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
+2. Place your keyboard into reset. 
+3. Press the `Find Device` button and ensure that your keyboard is found.
+4. Press the `Open .hex File` button and locate the `.hex` file you created.
+5. Press the `Flash Device` button and wait for the process to complete. 
+
+macOS:
+1. Install homebrew by typing the following:   
+    ```
+    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
+    ```
+2. Install `crosspack-avr`.  
+    ```
+    brew cask install crosspack-avr
+    ```
+3. Install the following packages:
+    ```
+    brew install python
+    brew install pyusb
+    brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
+
+4. Place your keyboard into reset. 
+5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. 
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Troubleshooting
+
+From my experience, it's really hard to brick these boards. But these
+tricks have been useful when it got stuck in a weird scenario.
+
+1. Try plugging the board in while holding the bootloader key. This will force 
+   it to boot only the bootloader without loading the firmware. Once this is
+   done, just reflash the board with the original firmware.
+2. Sometimes USB hubs can act weird, so try connecting the board directly
+   to your computer or plugging/unplugging the USB hub.

keyboards/skog/backlight.c

@@ -0,0 +1,211 @@
+/**
+ * Backlighting code for PS2AVRGB boards (ATMEGA32A)
+ * Kenneth A. (github.com/krusli | krusli.me)
+ */
+
+#include "backlight.h"
+#include "quantum.h"
+
+#include <avr/pgmspace.h>
+#include <avr/interrupt.h>
+
+#include "backlight_custom.h"
+#include "breathing_custom.h"
+
+// DEBUG
+#include <stdlib.h>
+#include <stdio.h>
+
+// Port D: digital pins of the AVR chipset
+#define NUMLOCK_PORT    (1 << 0)  // D0
+#define CAPSLOCK_PORT   (1 << 1)  // D1
+#define BACKLIGHT_PORT  (1 << 4)  // D4
+#define SCROLLLOCK_PORT (1 << 6)  // D6
+
+#define TIMER_CLK_DIV64			  0x03	///< Timer clocked at F_CPU/64
+#define TIMER1PRESCALE	TIMER_CLK_DIV64 ///< timer 1 prescaler default
+
+#define TIMER_PRESCALE_MASK		0x07	///< Timer Prescaler Bit-Mask
+
+#define PWM_MAX 0xFF
+#define TIMER_TOP 255 // 8 bit PWM
+
+extern backlight_config_t backlight_config;
+
+/**
+ * References
+ * Port Registers: https://www.arduino.cc/en/Reference/PortManipulation
+ * TCCR1A: https://electronics.stackexchange.com/questions/92350/what-is-the-difference-between-tccr1a-and-tccr1b
+ * Timers: http://www.avrbeginners.net/architecture/timers/timers.html
+ * 16-bit timer setup: http://sculland.com/ATmega168/Interrupts-And-Timers/16-Bit-Timer-Setup/
+ * PS2AVRGB firmware: https://github.com/showjean/ps2avrU/tree/master/firmware
+ */
+
+// @Override
+// turn LEDs on and off depending on USB caps/num/scroll lock states.
+__attribute__ ((weak))
+void led_set_user(uint8_t usb_led) {
+    if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+      // turn on
+      DDRD  |= NUMLOCK_PORT;
+      PORTD |= NUMLOCK_PORT;
+    } else {
+      // turn off
+      DDRD  &= ~NUMLOCK_PORT;
+      PORTD &= ~NUMLOCK_PORT;
+    }
+
+    if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+      DDRD  |= CAPSLOCK_PORT;
+      PORTD |= CAPSLOCK_PORT;
+    } else {
+      DDRD  &= ~CAPSLOCK_PORT;
+      PORTD &= ~CAPSLOCK_PORT;
+    }
+
+    if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+      DDRD  |= SCROLLLOCK_PORT;
+      PORTD |= SCROLLLOCK_PORT;
+    } else {
+      DDRD  &= ~SCROLLLOCK_PORT;
+      PORTD &= ~SCROLLLOCK_PORT;
+    }
+}
+
+#ifdef BACKLIGHT_ENABLE
+
+// sets up Timer 1 for 8-bit PWM
+void timer1PWMSetup(void) { // NOTE ONLY CALL THIS ONCE
+  // default 8 bit mode
+  TCCR1A &= ~(1 << 1); // cbi(TCCR1A,PWM11); <- set PWM11 bit to HIGH
+  TCCR1A |= (1 << 0);  // sbi(TCCR1A,PWM10); <- set PWM10 bit to LOW
+
+  // clear output compare value A
+  // outb(OCR1AH, 0);
+  // outb(OCR1AL, 0);
+
+  // clear output comparator registers for B
+	OCR1BH = 0; // outb(OCR1BH, 0);
+	OCR1BL = 0; // outb(OCR1BL, 0);
+}
+
+bool is_init = false;
+void timer1Init(void) {
+  // timer1SetPrescaler(TIMER1PRESCALE)
+  // set to DIV/64
+  (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | TIMER1PRESCALE;
+
+  // reset TCNT1
+  TCNT1H = 0;  // outb(TCNT1H, 0);
+	TCNT1L = 0;  // outb(TCNT1L, 0);
+
+  // TOIE1: Timer Overflow Interrupt Enable (Timer 1);
+	TIMSK |= _BV(TOIE1); // sbi(TIMSK, TOIE1);
+
+  is_init = true;
+}
+
+void timer1UnInit(void) {
+  // set prescaler back to NONE
+  (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | 0x00;  // TIMERRTC_CLK_STOP
+
+  // disable timer overflow interrupt
+  TIMSK &= ~_BV(TOIE1); // overflow bit?
+
+  setPWM(0);
+
+  is_init = false;
+}
+
+
+// handle TCNT1 overflow
+//! Interrupt handler for tcnt1 overflow interrupt
+ISR(TIMER1_OVF_vect, ISR_NOBLOCK)
+{
+	// sei();
+  // handle breathing here
+  #ifdef BACKLIGHT_BREATHING
+  if (is_breathing()) {
+    custom_breathing_handler();
+  }
+  #endif
+}
+
+// enable timer 1 PWM
+// timer1PWMBOn()
+void timer1PWMBEnable(void) {
+  // turn on channel B (OC1B) PWM output
+  // set OC1B as non-inverted PWM
+  TCCR1A |= _BV(COM1B1);
+  TCCR1A &= ~_BV(COM1B0);
+}
+
+// disable timer 1 PWM
+// timer1PWMBOff()
+void timer1PWMBDisable(void) {
+  TCCR1A &= ~_BV(COM1B1);
+  TCCR1A &= ~_BV(COM1B0);
+}
+
+void enableBacklight(void) {
+  DDRD  |= BACKLIGHT_PORT;  // set digital pin 4 as output
+  PORTD |= BACKLIGHT_PORT;  // set digital pin 4 to high
+}
+
+void disableBacklight(void) {
+  // DDRD  &= ~BACKLIGHT_PORT;  // set digital pin 4 as input
+  PORTD &= ~BACKLIGHT_PORT;  // set digital pin 4 to low
+}
+
+void startPWM(void) {
+  timer1Init();
+  timer1PWMBEnable();
+  enableBacklight();
+}
+
+void stopPWM(void) {
+  timer1UnInit();
+  disableBacklight();
+  timer1PWMBDisable();
+}
+
+void b_led_init_ports(void) {
+  /* turn backlight on/off depending on user preference */
+  #if BACKLIGHT_ON_STATE == 0
+    // DDRx register: sets the direction of Port D
+    // DDRD  &= ~BACKLIGHT_PORT;  // set digital pin 4 as input
+    PORTD &= ~BACKLIGHT_PORT;  // set digital pin 4 to low
+  #else
+    DDRD  |= BACKLIGHT_PORT;  // set digital pin 4 as output
+    PORTD |= BACKLIGHT_PORT;  // set digital pin 4 to high
+  #endif
+
+  timer1PWMSetup();
+  startPWM();
+
+  #ifdef BACKLIGHT_BREATHING
+  breathing_enable();
+  #endif
+}
+
+void b_led_set(uint8_t level) {
+  if (level > BACKLIGHT_LEVELS) {
+    level = BACKLIGHT_LEVELS;
+  }
+
+  setPWM((int)(TIMER_TOP * (float) level / BACKLIGHT_LEVELS));
+}
+
+// called every matrix scan
+void b_led_task(void) {
+  // do nothing for now
+}
+
+void setPWM(uint16_t xValue) {
+  if (xValue > TIMER_TOP) {
+    xValue = TIMER_TOP;
+  }
+  OCR1B = xValue; // timer1PWMBSet(xValue);
+}
+
+#endif  // BACKLIGHT_ENABLE

keyboards/skog/backlight_custom.h

@@ -0,0 +1,13 @@
+/**
+ * Backlighting code for PS2AVRGB boards (ATMEGA32A)
+ * Kenneth A. (github.com/krusli | krusli.me)
+ */
+
+#pragma once
+
+#include <avr/pgmspace.h>
+void b_led_init_ports(void);
+void b_led_set(uint8_t level);
+void b_led_task(void);
+void setPWM(uint16_t xValue);
+

keyboards/skog/breathing_custom.h

@@ -0,0 +1,140 @@
+/**
+ * Breathing effect code for PS2AVRGB boards (ATMEGA32A)
+ * Works in conjunction with `backlight.c`.
+ *
+ * Code adapted from `quantum.c` to register with the existing TIMER1 overflow
+ * handler in `backlight.c` instead of setting up its own timer.
+ * Kenneth A. (github.com/krusli | krusli.me)
+ */
+
+#ifdef BACKLIGHT_ENABLE
+#ifdef BACKLIGHT_BREATHING
+
+#include "backlight_custom.h"
+
+#ifndef BREATHING_PERIOD
+#define BREATHING_PERIOD 6
+#endif
+
+#define breathing_min() do {breathing_counter = 0;} while (0)
+#define breathing_max() do {breathing_counter = breathing_period * 244 / 2;} while (0)
+
+// TODO make this share code with quantum.c
+
+#define BREATHING_NO_HALT  0
+#define BREATHING_HALT_OFF 1
+#define BREATHING_HALT_ON  2
+#define BREATHING_STEPS 128
+
+static uint8_t breathing_period = BREATHING_PERIOD;
+static uint8_t breathing_halt = BREATHING_NO_HALT;
+static uint16_t breathing_counter = 0;
+
+static bool breathing = false;
+
+bool is_breathing(void) {
+  return breathing;
+}
+
+// See http://jared.geek.nz/2013/feb/linear-led-pwm
+static uint16_t cie_lightness(uint16_t v) {
+  if (v <= 5243) // if below 8% of max
+    return v / 9; // same as dividing by 900%
+  else {
+    uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare
+    // to get a useful result with integer division, we shift left in the expression above
+    // and revert what we've done again after squaring.
+    y = y * y * y >> 8;
+    if (y > 0xFFFFUL) // prevent overflow
+      return 0xFFFFU;
+    else
+      return (uint16_t) y;
+  }
+}
+
+void breathing_enable(void) {
+  breathing = true;
+  breathing_counter = 0;
+  breathing_halt = BREATHING_NO_HALT;
+  // interrupt already registered
+}
+
+void breathing_pulse(void) {
+  if (get_backlight_level() == 0)
+    breathing_min();
+  else
+    breathing_max();
+  breathing_halt = BREATHING_HALT_ON;
+  // breathing_interrupt_enable();
+  breathing = true;
+}
+
+void breathing_disable(void) {
+  breathing = false;
+  // backlight_set(get_backlight_level());
+  b_led_set(get_backlight_level()); // custom implementation of backlight_set()
+}
+
+void breathing_self_disable(void)
+{
+  if (get_backlight_level() == 0)
+    breathing_halt = BREATHING_HALT_OFF;
+  else
+    breathing_halt = BREATHING_HALT_ON;
+}
+
+void breathing_toggle(void) {
+  if (is_breathing())
+    breathing_disable();
+  else
+    breathing_enable();
+}
+
+void breathing_period_set(uint8_t value)
+{
+  if (!value)
+    value = 1;
+  breathing_period = value;
+}
+
+void breathing_period_default(void) {
+  breathing_period_set(BREATHING_PERIOD);
+}
+
+void breathing_period_inc(void)
+{
+  breathing_period_set(breathing_period+1);
+}
+
+void breathing_period_dec(void)
+{
+  breathing_period_set(breathing_period-1);
+}
+
+/* To generate breathing curve in python:
+ * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)]
+ */
+static const uint8_t breathing_table[BREATHING_STEPS] PROGMEM = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+
+// Use this before the cie_lightness function.
+static inline uint16_t scale_backlight(uint16_t v) {
+  return v / BACKLIGHT_LEVELS * get_backlight_level();
+}
+
+void custom_breathing_handler(void) {
+  uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS;
+  // resetting after one period to prevent ugly reset at overflow.
+  breathing_counter = (breathing_counter + 1) % (breathing_period * 244);
+  uint8_t index = breathing_counter / interval % BREATHING_STEPS;
+
+  if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) ||
+      ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1)))
+  {
+      // breathing_interrupt_disable();
+  }
+
+  setPWM(cie_lightness(scale_backlight((uint16_t) pgm_read_byte(&breathing_table[index]) * 0x0101U)));
+}
+
+#endif // BACKLIGHT_BREATHING
+#endif  // BACKLIGHT_ENABLE

keyboards/skog/config.h

@@ -0,0 +1,42 @@
+/*
+Copyright 2018 Jumail Mundekkat / MxBlue
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#define VENDOR_ID       0x20A0
+#define PRODUCT_ID      0x422D
+
+#define MANUFACTURER    Percent
+#define PRODUCT         Skog TKL
+
+/* matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 14
+
+#define RGBLED_NUM 2
+#define RGBLIGHT_ANIMATIONS
+
+#define BACKLIGHT_LEVELS 5
+
+#define NO_UART 1
+#define BOOTLOADHID_BOOTLOADER 1
+
+/* key combination for command */
+#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+#endif

keyboards/skog/i2c.c

@@ -0,0 +1,106 @@
+/*
+Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+// Please do not modify this file 
+
+#include <avr/io.h>
+#include <util/twi.h>
+
+#include "i2c.h"
+
+void i2c_set_bitrate(uint16_t bitrate_khz) {
+    uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
+    if (bitrate_div >= 16) {
+        bitrate_div = (bitrate_div - 16) / 2;
+    }
+    TWBR = bitrate_div;
+}
+
+void i2c_init(void) {
+    // set pull-up resistors on I2C bus pins
+    PORTC |= 0b11;
+
+    i2c_set_bitrate(400);
+
+    // enable TWI (two-wire interface)
+    TWCR |= (1 << TWEN);
+
+    // enable TWI interrupt and slave address ACK
+    TWCR |= (1 << TWIE);
+    TWCR |= (1 << TWEA);
+}
+
+uint8_t i2c_start(uint8_t address) {
+    // reset TWI control register
+    TWCR = 0;
+
+    // begin transmission and wait for it to end
+    TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
+    while (!(TWCR & (1<<TWINT)));
+
+    // check if the start condition was successfully transmitted
+    if ((TWSR & 0xF8) != TW_START) {
+        return 1;
+    }
+
+    // transmit address and wait
+    TWDR = address;
+    TWCR = (1<<TWINT) | (1<<TWEN);
+    while (!(TWCR & (1<<TWINT)));
+
+    // check if the device has acknowledged the READ / WRITE mode
+    uint8_t twst = TW_STATUS & 0xF8;
+    if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
+        return 1;
+    }
+
+    return 0;
+}
+
+void i2c_stop(void) {
+    TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+}
+
+uint8_t i2c_write(uint8_t data) {
+    TWDR = data;
+
+    // transmit data and wait
+    TWCR = (1<<TWINT) | (1<<TWEN);
+    while (!(TWCR & (1<<TWINT)));
+
+    if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
+        return 1;
+    }
+
+    return 0;
+}
+
+uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
+    if (i2c_start(address)) {
+        return 1;
+    }
+
+    for (uint16_t i = 0; i < length; i++) {
+        if (i2c_write(data[i])) {
+            return 1;
+        }
+    }
+
+    i2c_stop();
+
+    return 0;
+}

keyboards/skog/i2c.h

@@ -0,0 +1,25 @@
+/*
+Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+// Please do not modify this file 
+
+#pragma once
+
+void i2c_init(void);
+void i2c_set_bitrate(uint16_t bitrate_khz);
+uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
+

keyboards/skog/info.json

@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "skog",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 18.25,
+    "height": 6.5,
+    "layouts": {
+      "LAYOUT": {
+        "layout": [{"x":0, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":17.25, "y":0}, {"x":0, "y":1.5}, {"x":1, "y":1.5}, {"x":2, "y":1.5}, {"x":3, "y":1.5}, {"x":4, "y":1.5}, {"x":5, "y":1.5}, {"x":6, "y":1.5}, {"x":7, "y":1.5}, {"x":8, "y":1.5}, {"x":9, "y":1.5}, {"x":10, "y":1.5}, {"x":11, "y":1.5}, {"x":12, "y":1.5}, {"x":13, "y":1.5, "w":2}, {"x":15.25, "y":1.5}, {"x":16.25, "y":1.5}, {"x":17.25, "y":1.5}, {"x":0, "y":2.5, "w":1.5}, {"x":1.5, "y":2.5}, {"x":2.5, "y":2.5}, {"x":3.5, "y":2.5}, {"x":4.5, "y":2.5}, {"x":5.5, "y":2.5}, {"x":6.5, "y":2.5}, {"x":7.5, "y":2.5}, {"x":8.5, "y":2.5}, {"x":9.5, "y":2.5}, {"x":10.5, "y":2.5}, {"x":11.5, "y":2.5}, {"x":12.5, "y":2.5}, {"x":13.5, "y":2.5, "w":1.5}, {"x":15.25, "y":2.5}, {"x":16.25, "y":2.5}, {"x":17.25, "y":2.5}, {"x":0, "y":3.5, "w":1.75}, {"x":1.75, "y":3.5}, {"x":2.75, "y":3.5}, {"x":3.75, "y":3.5}, {"x":4.75, "y":3.5}, {"x":5.75, "y":3.5}, {"x":6.75, "y":3.5}, {"x":7.75, "y":3.5}, {"x":8.75, "y":3.5}, {"x":9.75, "y":3.5}, {"x":10.75, "y":3.5}, {"x":11.75, "y":3.5}, {"x":12.75, "y":3.5, "w":2.25}, {"x":0, "y":4.5, "w":2.25}, {"x":2.25, "y":4.5}, {"x":3.25, "y":4.5}, {"x":4.25, "y":4.5}, {"x":5.25, "y":4.5}, {"x":6.25, "y":4.5}, {"x":7.25, "y":4.5}, {"x":8.25, "y":4.5}, {"x":9.25, "y":4.5}, {"x":10.25, "y":4.5}, {"x":11.25, "y":4.5}, {"x":12.25, "y":4.5, "w":1.75}, {"x":14, "y":4.5}, {"x":16.25, "y":4.5}, {"x":0, "y":5.5, "w":1.25}, {"x":1.25, "y":5.5, "w":1.25}, {"x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"x":10, "y":5.5, "w":1.25}, {"x":11.25, "y":5.5, "w":1.25}, {"x":12.5, "y":5.5, "w":1.25}, {"x":13.75, "y":5.5, "w":1.25}, {"x":15.25, "y":5.5}, {"x":16.25, "y":5.5}, {"x":17.25, "y":5.5}]
+      }
+    }
+}

keyboards/skog/keymaps/default/keymap.c

@@ -0,0 +1,37 @@
+/*
+Copyright 2018 Jumail Mundekkat / MxBlue
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+      KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,    KC_F10,     KC_F11,     KC_F12,                  KC_PSCR, KC_SLCK, KC_PAUS,
+      KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,     KC_MINS,    KC_EQL,     KC_BSPC,                 KC_INS,  KC_HOME, KC_PGUP,
+      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,     KC_LBRC,    KC_RBRC,    KC_BSLS,                 KC_DEL,  KC_END,  KC_PGDN,
+      KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN,  KC_QUOT,            KC_ENT,
+           KC_LSFT    , KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,   KC_SLSH,    KC_LSFT,    KC_TRNS,                          KC_UP,
+      KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                                      KC_RALT,  KC_RGUI,    KC_MENU,    KC_RCTL,                 KC_LEFT, KC_DOWN, KC_RGHT
+    )
+};
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}

keyboards/skog/matrix.c

@@ -0,0 +1,112 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/io.h>
+#include <util/delay.h>
+
+#include "matrix.h"
+
+#ifndef DEBOUNCE
+#   define DEBOUNCE	5
+#endif
+
+static uint8_t debouncing = DEBOUNCE;
+
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+void matrix_set_row_status(uint8_t row);
+uint8_t bit_reverse(uint8_t x);
+
+void matrix_init(void) {
+    // all outputs for rows high
+    DDRB = 0xFF;
+    PORTB = 0xFF;
+    // all inputs for columns
+    DDRA = 0x00;
+    DDRC &= ~(0x111111<<2);
+    DDRD &= ~(1<<PIND7);
+    // all columns are pulled-up
+    PORTA = 0xFF;
+    PORTC |= (0b111111<<2);
+    PORTD |= (1<<PIND7);
+
+    // initialize matrix state: all keys off
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        matrix[row] = 0x00;
+        matrix_debouncing[row] = 0x00;
+    }
+
+    matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void) {
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        matrix_set_row_status(row);
+        _delay_us(5);
+
+        matrix_row_t cols = (
+            // cols 0..7, PORTA 0 -> 7
+            (~PINA) & 0xFF
+        ) | (
+            // cols 8..13, PORTC 7 -> 0
+            bit_reverse((~PINC) & 0xFF) << 8
+        ) | (
+            // col 14, PORTD 7
+            ((~PIND) & (1 << PIND7)) << 7
+        );
+
+        if (matrix_debouncing[row] != cols) {
+            matrix_debouncing[row] = cols;
+            debouncing = DEBOUNCE;
+        }
+    }
+
+    if (debouncing) {
+        if (--debouncing) {
+            _delay_ms(1);
+        } else {
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+                matrix[i] = matrix_debouncing[i];
+            }
+        }
+    }
+
+    matrix_scan_quantum();
+
+    return 1;
+}
+
+// declarations
+void matrix_set_row_status(uint8_t row) {
+    DDRB = (1 << row);
+    PORTB = ~(1 << row);
+}
+
+uint8_t bit_reverse(uint8_t x) {
+    x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa);
+    x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc);
+    x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0);
+    return x;
+}
+
+inline matrix_row_t matrix_get_row(uint8_t row) {
+    return matrix[row];
+}
+
+void matrix_print(void) {
+}

keyboards/skog/rules.mk

@@ -0,0 +1,55 @@
+# Copyright 2018 Jumail Mundekkat / MxBlue
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# MCU name
+MCU = atmega32a
+PROTOCOL = VUSB
+
+# unsupported features for now
+NO_UART = yes
+NO_SUSPEND_POWER_DOWN = yes
+
+# processor frequency
+F_CPU = 12000000
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = bootloadHID
+
+# build options
+BOOTMAGIC_ENABLE = full
+MOUSEKEY_ENABLE = no
+EXTRAKEY_ENABLE = yes
+CONSOLE_ENABLE = yes
+COMMAND_ENABLE = yes
+BACKLIGHT_ENABLE = yes
+RGBLIGHT_ENABLE = yes
+
+BACKLIGHT_CUSTOM_DRIVER = yes
+RGBLIGHT_CUSTOM_DRIVER = yes
+
+OPT_DEFS = -DDEBUG_LEVEL=0
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+# custom matrix setup
+CUSTOM_MATRIX = yes
+SRC = matrix.c i2c.c backlight.c
+
+# programming options
+PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex

keyboards/skog/skog.c

@@ -0,0 +1,98 @@
+/*
+Copyright 2018 Jumail Mundekkat / MxBlue
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+ps2avrGB support code by Kenneth A. (bminiex/.[ch])
+*/
+
+#include "skog.h"
+
+#include "rgblight.h"
+
+#include <avr/pgmspace.h>
+
+#include "action_layer.h"
+#include "i2c.h"
+#include "quantum.h"
+
+#include "backlight.h"
+#include "backlight_custom.h"
+
+// for keyboard subdirectory level init functions
+// @Override
+void matrix_init_kb(void) {
+  // call user level keymaps, if any
+  matrix_init_user();
+}
+
+#ifdef BACKLIGHT_ENABLE
+/// Overrides functions in `quantum.c`
+void backlight_init_ports(void) {
+  b_led_init_ports();
+}
+
+void backlight_task(void) {
+  b_led_task();
+}
+
+void backlight_set(uint8_t level) {
+  b_led_set(level);
+}
+#endif
+
+#ifdef RGBLIGHT_ENABLE
+extern rgblight_config_t rgblight_config;
+
+// custom RGB driver
+void rgblight_set(void) {
+  if (!rgblight_config.enable) {
+    for (uint8_t i=0; i<RGBLED_NUM; i++) {
+      led[i].r = 0;
+      led[i].g = 0;
+      led[i].b = 0;
+    }
+  }
+
+  i2c_init();
+  i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
+}
+
+bool rgb_init = false;
+
+void matrix_scan_kb(void) {
+  // if LEDs were previously on before poweroff, turn them back on
+  if (rgb_init == false && rgblight_config.enable) {
+    i2c_init();
+    i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
+    rgb_init = true;
+  }
+
+  rgblight_task();
+#else
+void matrix_scan_kb(void) {
+#endif
+  matrix_scan_user();
+  /* Nothing else for now. */
+}
+
+__attribute__((weak)) // overridable
+void matrix_init_user(void) {
+
+}
+
+__attribute__((weak)) // overridable
+void matrix_scan_user(void) {
+
+}

keyboards/skog/skog.h

@@ -0,0 +1,39 @@
+/*
+Copyright 2018 Jumail Mundekkat / MxBlue
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+  K11,      K31, K41, K51, K61,      K81, K91, KA1, KB1,      KC1, K01, KD1, K21,      K20, K30, K00, \
+                                                                                                      \
+  K12, K22, K32, K42, K52, K62,  K72,  K82,  K92,  KA2,  KB2, KC2, K02,   KD2   ,      K70, K60, K50, \
+   K13  , K23, K33, K43, K53, K63,  K73,  K83,  K93,  KA3,  KB3, KC3, K03,  KD3 ,      KD0, K90, K80, \
+     K15  , K25, K35, K45, K55, K65,  K75,  K85,  K95,  KA5,  KB5, KC5,   K05   ,                     \
+      K16  , K26, K36, K46, K56, K66,  K76,  K86,  K96,  KA6,  KB6,   KC6  , K06,           KD6,      \
+  K17 , K27 , K37 ,                K57                  , K97 , KA7 , KB7 , KC7 ,      K07, KD7, K87  \
+){ \
+  { K00,   KC_NO, K20,   K30,   KC_NO, K50,   K60,   K70,   K80,   K90,   KC_NO, KC_NO, KC_NO, KD0   }, \
+  { K01,   K11,   K21,   K31,   K41,   K51,   K61,   KC_NO, K81,   K91,   KA1,   KB1,   KC1,   KD1   }, \
+  { K02,   K12,   K22,   K32,   K42,   K52,   K62,   K72,   K82,   K92,   KA2,   KB2,   KC2,   KD2   }, \
+  { K03,   K13,   K23,   K33,   K43,   K53,   K63,   K73,   K83,   K93,   KA3,   KB3,   KC3,   KD3   }, \
+  { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+  { K05,   K15,   K25,   K35,   K45,   K55,   K65,   K75,   K85,   K95,   KA5,   KB5,   KC5,   KC_NO }, \
+  { K06,   K16,   K26,   K36,   K46,   K56,   K66,   K76,   K86,   K96,   KA6,   KB6,   KC6,   KD6   }, \
+  { K07,   K17,   K27,   K37,   KC_NO, K57,   KC_NO, KC_NO, K87,   K97,   KA7,   KB7,   KC7,   KD7   }  \
+}

keyboards/skog/usbconfig.h

@@ -0,0 +1,396 @@
+/* Name: usbconfig.h
+ * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
+ * Author: Christian Starkjohann
+ * Creation Date: 2005-04-01
+ * Tabsize: 4
+ * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
+ * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
+ * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
+ */
+
+#ifndef __usbconfig_h_included__
+#define __usbconfig_h_included__
+
+#include "config.h"
+
+/*
+General Description:
+This file is an example configuration (with inline documentation) for the USB
+driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
+also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
+wire the lines to any other port, as long as D+ is also wired to INT0 (or any
+other hardware interrupt, as long as it is the highest level interrupt, see
+section at the end of this file).
+*/
+
+/* ---------------------------- Hardware Config ---------------------------- */
+
+#define USB_CFG_IOPORTNAME      D
+/* This is the port where the USB bus is connected. When you configure it to
+ * "B", the registers PORTB, PINB and DDRB will be used.
+ */
+#define USB_CFG_DMINUS_BIT      3
+/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
+ * This may be any bit in the port.
+ */
+#define USB_CFG_DPLUS_BIT       2
+/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
+ * This may be any bit in the port. Please note that D+ must also be connected
+ * to interrupt pin INT0! [You can also use other interrupts, see section
+ * "Optional MCU Description" below, or you can connect D- to the interrupt, as
+ * it is required if you use the USB_COUNT_SOF feature. If you use D- for the
+ * interrupt, the USB interrupt will also be triggered at Start-Of-Frame
+ * markers every millisecond.]
+ */
+#define USB_CFG_CLOCK_KHZ       (F_CPU/1000)
+/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
+ * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
+ * require no crystal, they tolerate +/- 1% deviation from the nominal
+ * frequency. All other rates require a precision of 2000 ppm and thus a
+ * crystal!
+ * Since F_CPU should be defined to your actual clock rate anyway, you should
+ * not need to modify this setting.
+ */
+#define USB_CFG_CHECK_CRC       0
+/* Define this to 1 if you want that the driver checks integrity of incoming
+ * data packets (CRC checks). CRC checks cost quite a bit of code size and are
+ * currently only available for 18 MHz crystal clock. You must choose
+ * USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
+ */
+
+/* ----------------------- Optional Hardware Config ------------------------ */
+
+/* #define USB_CFG_PULLUP_IOPORTNAME   D */
+/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
+ * V+, you can connect and disconnect the device from firmware by calling
+ * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
+ * This constant defines the port on which the pullup resistor is connected.
+ */
+/* #define USB_CFG_PULLUP_BIT          4 */
+/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
+ * above) where the 1.5k pullup resistor is connected. See description
+ * above for details.
+ */
+
+/* --------------------------- Functional Range ---------------------------- */
+
+#define USB_CFG_HAVE_INTRIN_ENDPOINT    1
+/* Define this to 1 if you want to compile a version with two endpoints: The
+ * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
+ * number).
+ */
+#define USB_CFG_HAVE_INTRIN_ENDPOINT3   1
+/* Define this to 1 if you want to compile a version with three endpoints: The
+ * default control endpoint 0, an interrupt-in endpoint 3 (or the number
+ * configured below) and a catch-all default interrupt-in endpoint as above.
+ * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
+ */
+#define USB_CFG_EP3_NUMBER              3
+/* If the so-called endpoint 3 is used, it can now be configured to any other
+ * endpoint number (except 0) with this macro. Default if undefined is 3.
+ */
+/* #define USB_INITIAL_DATATOKEN           USBPID_DATA1 */
+/* The above macro defines the startup condition for data toggling on the
+ * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
+ * Since the token is toggled BEFORE sending any data, the first packet is
+ * sent with the oposite value of this configuration!
+ */
+#define USB_CFG_IMPLEMENT_HALT          0
+/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
+ * for endpoint 1 (interrupt endpoint). Although you may not need this feature,
+ * it is required by the standard. We have made it a config option because it
+ * bloats the code considerably.
+ */
+#define USB_CFG_SUPPRESS_INTR_CODE      0
+/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
+ * want to send any data over them. If this macro is defined to 1, functions
+ * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
+ * you need the interrupt-in endpoints in order to comply to an interface
+ * (e.g. HID), but never want to send any data. This option saves a couple
+ * of bytes in flash memory and the transmit buffers in RAM.
+ */
+#define USB_CFG_INTR_POLL_INTERVAL      1
+/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
+ * interval. The value is in milliseconds and must not be less than 10 ms for
+ * low speed devices.
+ */
+#define USB_CFG_IS_SELF_POWERED         0
+/* Define this to 1 if the device has its own power supply. Set it to 0 if the
+ * device is powered from the USB bus.
+ */
+#define USB_CFG_MAX_BUS_POWER           500
+/* Set this variable to the maximum USB bus power consumption of your device.
+ * The value is in milliamperes. [It will be divided by two since USB
+ * communicates power requirements in units of 2 mA.]
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITE      1
+/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
+ * transfers. Set it to 0 if you don't need it and want to save a couple of
+ * bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_READ       0
+/* Set this to 1 if you need to send control replies which are generated
+ * "on the fly" when usbFunctionRead() is called. If you only want to send
+ * data from a static buffer, set it to 0 and return the data from
+ * usbFunctionSetup(). This saves a couple of bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITEOUT   0
+/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
+ * You must implement the function usbFunctionWriteOut() which receives all
+ * interrupt/bulk data sent to any endpoint other than 0. The endpoint number
+ * can be found in 'usbRxToken'.
+ */
+#define USB_CFG_HAVE_FLOWCONTROL        0
+/* Define this to 1 if you want flowcontrol over USB data. See the definition
+ * of the macros usbDisableAllRequests() and usbEnableAllRequests() in
+ * usbdrv.h.
+ */
+#define USB_CFG_DRIVER_FLASH_PAGE       0
+/* If the device has more than 64 kBytes of flash, define this to the 64 k page
+ * where the driver's constants (descriptors) are located. Or in other words:
+ * Define this to 1 for boot loaders on the ATMega128.
+ */
+#define USB_CFG_LONG_TRANSFERS          0
+/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
+ * in a single control-in or control-out transfer. Note that the capability
+ * for long transfers increases the driver size.
+ */
+/* #define USB_RX_USER_HOOK(data, len)     if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
+/* This macro is a hook if you want to do unconventional things. If it is
+ * defined, it's inserted at the beginning of received message processing.
+ * If you eat the received message and don't want default processing to
+ * proceed, do a return after doing your things. One possible application
+ * (besides debugging) is to flash a status LED on each packet.
+ */
+/* #define USB_RESET_HOOK(resetStarts)     if(!resetStarts){hadUsbReset();} */
+/* This macro is a hook if you need to know when an USB RESET occurs. It has
+ * one parameter which distinguishes between the start of RESET state and its
+ * end.
+ */
+/* #define USB_SET_ADDRESS_HOOK()              hadAddressAssigned(); */
+/* This macro (if defined) is executed when a USB SET_ADDRESS request was
+ * received.
+ */
+#define USB_COUNT_SOF                   1
+/* define this macro to 1 if you need the global variable "usbSofCount" which
+ * counts SOF packets. This feature requires that the hardware interrupt is
+ * connected to D- instead of D+.
+ */
+/* #ifdef __ASSEMBLER__
+ * macro myAssemblerMacro
+ *     in      YL, TCNT0
+ *     sts     timer0Snapshot, YL
+ *     endm
+ * #endif
+ * #define USB_SOF_HOOK                    myAssemblerMacro
+ * This macro (if defined) is executed in the assembler module when a
+ * Start Of Frame condition is detected. It is recommended to define it to
+ * the name of an assembler macro which is defined here as well so that more
+ * than one assembler instruction can be used. The macro may use the register
+ * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
+ * immediately after an SOF pulse may be lost and must be retried by the host.
+ * What can you do with this hook? Since the SOF signal occurs exactly every
+ * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
+ * designs running on the internal RC oscillator.
+ * Please note that Start Of Frame detection works only if D- is wired to the
+ * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
+ */
+#define USB_CFG_CHECK_DATA_TOGGLING     0
+/* define this macro to 1 if you want to filter out duplicate data packets
+ * sent by the host. Duplicates occur only as a consequence of communication
+ * errors, when the host does not receive an ACK. Please note that you need to
+ * implement the filtering yourself in usbFunctionWriteOut() and
+ * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
+ * for each control- and out-endpoint to check for duplicate packets.
+ */
+#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH   0
+/* define this macro to 1 if you want the function usbMeasureFrameLength()
+ * compiled in. This function can be used to calibrate the AVR's RC oscillator.
+ */
+#define USB_USE_FAST_CRC                0
+/* The assembler module has two implementations for the CRC algorithm. One is
+ * faster, the other is smaller. This CRC routine is only used for transmitted
+ * messages where timing is not critical. The faster routine needs 31 cycles
+ * per byte while the smaller one needs 61 to 69 cycles. The faster routine
+ * may be worth the 32 bytes bigger code size if you transmit lots of data and
+ * run the AVR close to its limit.
+ */
+
+/* -------------------------- Device Description --------------------------- */
+
+#define USB_CFG_VENDOR_ID       (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
+/* USB vendor ID for the device, low byte first. If you have registered your
+ * own Vendor ID, define it here. Otherwise you may use one of obdev's free
+ * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_ID       (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
+/* This is the ID of the product, low byte first. It is interpreted in the
+ * scope of the vendor ID. If you have registered your own VID with usb.org
+ * or if you have licensed a PID from somebody else, define it here. Otherwise
+ * you may use one of obdev's free shared VID/PID pairs. See the file
+ * USB-IDs-for-free.txt for details!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_VERSION  0x00, 0x02
+/* Version number of the device: Minor number first, then major number.
+ */
+#define USB_CFG_VENDOR_NAME     'P','e','r','c','e','n','t'
+#define USB_CFG_VENDOR_NAME_LEN 7
+/* These two values define the vendor name returned by the USB device. The name
+ * must be given as a list of characters under single quotes. The characters
+ * are interpreted as Unicode (UTF-16) entities.
+ * If you don't want a vendor name string, undefine these macros.
+ * ALWAYS define a vendor name containing your Internet domain name if you use
+ * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
+ * details.
+ */
+#define USB_CFG_DEVICE_NAME     'S','k','o','g',' ','T','K','L'
+#define USB_CFG_DEVICE_NAME_LEN 8
+/* Same as above for the device name. If you don't want a device name, undefine
+ * the macros. See the file USB-IDs-for-free.txt before you assign a name if
+ * you use a shared VID/PID.
+ */
+/*#define USB_CFG_SERIAL_NUMBER   'N', 'o', 'n', 'e' */
+/*#define USB_CFG_SERIAL_NUMBER_LEN   0 */
+/* Same as above for the serial number. If you don't want a serial number,
+ * undefine the macros.
+ * It may be useful to provide the serial number through other means than at
+ * compile time. See the section about descriptor properties below for how
+ * to fine tune control over USB descriptors such as the string descriptor
+ * for the serial number.
+ */
+#define USB_CFG_DEVICE_CLASS        0
+#define USB_CFG_DEVICE_SUBCLASS     0
+/* See USB specification if you want to conform to an existing device class.
+ * Class 0xff is "vendor specific".
+ */
+#define USB_CFG_INTERFACE_CLASS     3   /* HID */
+#define USB_CFG_INTERFACE_SUBCLASS  1   /* Boot */
+#define USB_CFG_INTERFACE_PROTOCOL  1   /* Keyboard */
+/* See USB specification if you want to conform to an existing device class or
+ * protocol. The following classes must be set at interface level:
+ * HID class is 3, no subclass and protocol required (but may be useful!)
+ * CDC class is 2, use subclass 2 and protocol 1 for ACM
+ */
+#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH    0
+/* Define this to the length of the HID report descriptor, if you implement
+ * an HID device. Otherwise don't define it or define it to 0.
+ * If you use this define, you must add a PROGMEM character array named
+ * "usbHidReportDescriptor" to your code which contains the report descriptor.
+ * Don't forget to keep the array and this define in sync!
+ */
+
+/* #define USB_PUBLIC static */
+/* Use the define above if you #include usbdrv.c instead of linking against it.
+ * This technique saves a couple of bytes in flash memory.
+ */
+
+/* ------------------- Fine Control over USB Descriptors ------------------- */
+/* If you don't want to use the driver's default USB descriptors, you can
+ * provide our own. These can be provided as (1) fixed length static data in
+ * flash memory, (2) fixed length static data in RAM or (3) dynamically at
+ * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
+ * information about this function.
+ * Descriptor handling is configured through the descriptor's properties. If
+ * no properties are defined or if they are 0, the default descriptor is used.
+ * Possible properties are:
+ *   + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
+ *     at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
+ *     used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
+ *     you want RAM pointers.
+ *   + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
+ *     in static memory is in RAM, not in flash memory.
+ *   + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
+ *     the driver must know the descriptor's length. The descriptor itself is
+ *     found at the address of a well known identifier (see below).
+ * List of static descriptor names (must be declared PROGMEM if in flash):
+ *   char usbDescriptorDevice[];
+ *   char usbDescriptorConfiguration[];
+ *   char usbDescriptorHidReport[];
+ *   char usbDescriptorString0[];
+ *   int usbDescriptorStringVendor[];
+ *   int usbDescriptorStringDevice[];
+ *   int usbDescriptorStringSerialNumber[];
+ * Other descriptors can't be provided statically, they must be provided
+ * dynamically at runtime.
+ *
+ * Descriptor properties are or-ed or added together, e.g.:
+ * #define USB_CFG_DESCR_PROPS_DEVICE   (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
+ *
+ * The following descriptors are defined:
+ *   USB_CFG_DESCR_PROPS_DEVICE
+ *   USB_CFG_DESCR_PROPS_CONFIGURATION
+ *   USB_CFG_DESCR_PROPS_STRINGS
+ *   USB_CFG_DESCR_PROPS_STRING_0
+ *   USB_CFG_DESCR_PROPS_STRING_VENDOR
+ *   USB_CFG_DESCR_PROPS_STRING_PRODUCT
+ *   USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
+ *   USB_CFG_DESCR_PROPS_HID
+ *   USB_CFG_DESCR_PROPS_HID_REPORT
+ *   USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
+ *
+ * Note about string descriptors: String descriptors are not just strings, they
+ * are Unicode strings prefixed with a 2 byte header. Example:
+ * int  serialNumberDescriptor[] = {
+ *     USB_STRING_DESCRIPTOR_HEADER(6),
+ *     'S', 'e', 'r', 'i', 'a', 'l'
+ * };
+ */
+
+#define USB_CFG_DESCR_PROPS_DEVICE                  0
+#define USB_CFG_DESCR_PROPS_CONFIGURATION           USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_CONFIGURATION           0
+#define USB_CFG_DESCR_PROPS_STRINGS                 0
+#define USB_CFG_DESCR_PROPS_STRING_0                0
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR           0
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT          0
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER    0
+#define USB_CFG_DESCR_PROPS_HID                     USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID                     0
+#define USB_CFG_DESCR_PROPS_HID_REPORT              USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID_REPORT              0
+#define USB_CFG_DESCR_PROPS_UNKNOWN                 0
+
+#define usbMsgPtr_t unsigned short
+/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to
+ * a scalar type here because gcc generates slightly shorter code for scalar
+ * arithmetics than for pointer arithmetics. Remove this define for backward
+ * type compatibility or define it to an 8 bit type if you use data in RAM only
+ * and all RAM is below 256 bytes (tiny memory model in IAR CC).
+ */
+
+/* ----------------------- Optional MCU Description ------------------------ */
+
+/* The following configurations have working defaults in usbdrv.h. You
+ * usually don't need to set them explicitly. Only if you want to run
+ * the driver on a device which is not yet supported or with a compiler
+ * which is not fully supported (such as IAR C) or if you use a differnt
+ * interrupt than INT0, you may have to define some of these.
+ */
+/* #define USB_INTR_CFG            MCUCR */
+/* #define USB_INTR_CFG_SET        ((1 << ISC00) | (1 << ISC01)) */
+/* #define USB_INTR_CFG_CLR        0 */
+/* #define USB_INTR_ENABLE         GIMSK */
+/* #define USB_INTR_ENABLE_BIT     INT0 */
+/* #define USB_INTR_PENDING        GIFR */
+/* #define USB_INTR_PENDING_BIT    INTF0 */
+/* #define USB_INTR_VECTOR         INT0_vect */
+
+/* Set INT1 for D- falling edge to count SOF */
+/* #define USB_INTR_CFG            EICRA */
+#define USB_INTR_CFG_SET        ((1 << ISC11) | (0 << ISC10))
+/* #define USB_INTR_CFG_CLR        0 */
+/* #define USB_INTR_ENABLE         EIMSK */
+#define USB_INTR_ENABLE_BIT     INT1
+/* #define USB_INTR_PENDING        EIFR */
+#define USB_INTR_PENDING_BIT    INTF1
+#define USB_INTR_VECTOR         INT1_vect
+
+#endif /* __usbconfig_h_included__ */

keyboards/toad/info.json

@@ -0,0 +1,409 @@
+{
+  "keyboard_name": "Toad",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 15,
+  "height": 6.5,
+  "layouts": {
+    "LAYOUT_all": {
+      "key_count": 78,
+      "layout": [
+        {"label":"K000", "x":0, "y":0},
+        {"label":"K001", "x":2, "y":0},
+        {"label":"K002", "x":3, "y":0},
+        {"label":"K003", "x":4, "y":0},
+        {"label":"K004", "x":5, "y":0},
+        {"label":"K005", "x":6.5, "y":0},
+        {"label":"K006", "x":7.5, "y":0},
+        {"label":"K007", "x":8.5, "y":0},
+        {"label":"K008", "x":9.5, "y":0},
+        {"label":"K009", "x":11, "y":0},
+        {"label":"K010", "x":12, "y":0},
+        {"label":"K011", "x":13, "y":0},
+        {"label":"K012", "x":14, "y":0},
+        {"label":"K100", "x":0, "y":1.5},
+        {"label":"K101", "x":1, "y":1.5},
+        {"label":"K102", "x":2, "y":1.5},
+        {"label":"K103", "x":3, "y":1.5},
+        {"label":"K104", "x":4, "y":1.5},
+        {"label":"K105", "x":5, "y":1.5},
+        {"label":"K106", "x":6, "y":1.5},
+        {"label":"K107", "x":7, "y":1.5},
+        {"label":"K108", "x":8, "y":1.5},
+        {"label":"K109", "x":9, "y":1.5},
+        {"label":"K110", "x":10, "y":1.5},
+        {"label":"K111", "x":11, "y":1.5},
+        {"label":"K112", "x":12, "y":1.5},
+        {"label":"K113", "x":13, "y":1.5},
+        {"label":"K013", "x":14, "y":1.5},
+        {"label":"K200", "x":0, "y":2.5, "w":1.5},
+        {"label":"K201", "x":1.5, "y":2.5},
+        {"label":"K202", "x":2.5, "y":2.5},
+        {"label":"K203", "x":3.5, "y":2.5},
+        {"label":"K204", "x":4.5, "y":2.5},
+        {"label":"K205", "x":5.5, "y":2.5},
+        {"label":"K206", "x":6.5, "y":2.5},
+        {"label":"K207", "x":7.5, "y":2.5},
+        {"label":"K208", "x":8.5, "y":2.5},
+        {"label":"K209", "x":9.5, "y":2.5},
+        {"label":"K210", "x":10.5, "y":2.5},
+        {"label":"K211", "x":11.5, "y":2.5},
+        {"label":"K212", "x":12.5, "y":2.5},
+        {"label":"K213", "x":13.5, "y":2.5, "w":1.5},
+        {"label":"K300", "x":0, "y":3.5, "w":1.75},
+        {"label":"K301", "x":1.75, "y":3.5},
+        {"label":"K302", "x":2.75, "y":3.5},
+        {"label":"K303", "x":3.75, "y":3.5},
+        {"label":"K304", "x":4.75, "y":3.5},
+        {"label":"K305", "x":5.75, "y":3.5},
+        {"label":"K306", "x":6.75, "y":3.5},
+        {"label":"K307", "x":7.75, "y":3.5},
+        {"label":"K308", "x":8.75, "y":3.5},
+        {"label":"K309", "x":9.75, "y":3.5},
+        {"label":"K310", "x":10.75, "y":3.5},
+        {"label":"K311", "x":11.75, "y":3.5},
+        {"label":"K312", "x":12.75, "y":3.5},
+        {"label":"K313", "x":13.75, "y":3.5, "w":1.25},
+        {"label":"K400", "x":0, "y":4.5, "w":1.25},
+        {"label":"K401", "x":1.25, "y":4.5},
+        {"label":"K402", "x":2.25, "y":4.5},
+        {"label":"K403", "x":3.25, "y":4.5},
+        {"label":"K404", "x":4.25, "y":4.5},
+        {"label":"K405", "x":5.25, "y":4.5},
+        {"label":"K406", "x":6.25, "y":4.5},
+        {"label":"K407", "x":7.25, "y":4.5},
+        {"label":"K408", "x":8.25, "y":4.5},
+        {"label":"K409", "x":9.25, "y":4.5},
+        {"label":"K410", "x":10.25, "y":4.5},
+        {"label":"K411", "x":11.25, "y":4.5},
+        {"label":"K412", "x":12.25, "y":4.5, "w":1.75},
+        {"label":"K413", "x":14, "y":4.5},
+        {"label":"K500", "x":0, "y":5.5, "w":1.25},
+        {"label":"K501", "x":1.25, "y":5.5, "w":1.25},
+        {"label":"K502", "x":2.5, "y":5.5, "w":1.25},
+        {"label":"K507", "x":3.75, "y":5.5, "w":6.25},
+        {"label":"K510", "x":10, "y":5.5, "w":1.25},
+        {"label":"K511", "x":11.25, "y":5.5, "w":1.25},
+        {"label":"K512", "x":12.5, "y":5.5, "w":1.25},
+        {"label":"K513", "x":13.75, "y":5.5, "w":1.25}
+      ]
+    },
+
+    "LAYOUT_ansi_wk": {
+      "key_count": 74,
+      "layout": [
+        {"label":"K000", "x":0, "y":0}, 
+        {"label":"K001", "x":2, "y":0}, 
+        {"label":"K002", "x":3, "y":0}, 
+        {"label":"K003", "x":4, "y":0}, 
+        {"label":"K004", "x":5, "y":0}, 
+        {"label":"K005", "x":6.5, "y":0}, 
+        {"label":"K006", "x":7.5, "y":0}, 
+        {"label":"K007", "x":8.5, "y":0}, 
+        {"label":"K008", "x":9.5, "y":0}, 
+        {"label":"K009", "x":11, "y":0}, 
+        {"label":"K010", "x":12, "y":0}, 
+        {"label":"K011", "x":13, "y":0}, 
+        {"label":"K012", "x":14, "y":0}, 
+        {"label":"K100", "x":0, "y":1.5}, 
+        {"label":"K101", "x":1, "y":1.5}, 
+        {"label":"K102", "x":2, "y":1.5}, 
+        {"label":"K103", "x":3, "y":1.5}, 
+        {"label":"K104", "x":4, "y":1.5}, 
+        {"label":"K105", "x":5, "y":1.5}, 
+        {"label":"K106", "x":6, "y":1.5}, 
+        {"label":"K107", "x":7, "y":1.5}, 
+        {"label":"K108", "x":8, "y":1.5}, 
+        {"label":"K109", "x":9, "y":1.5}, 
+        {"label":"K110", "x":10, "y":1.5}, 
+        {"label":"K111", "x":11, "y":1.5}, 
+        {"label":"K112", "x":12, "y":1.5}, 
+        {"label":"K013", "x":13, "y":1.5, "w":2}, 
+        {"label":"K200", "x":0, "y":2.5, "w":1.5}, 
+        {"label":"K201", "x":1.5, "y":2.5}, 
+        {"label":"K202", "x":2.5, "y":2.5}, 
+        {"label":"K203", "x":3.5, "y":2.5}, 
+        {"label":"K204", "x":4.5, "y":2.5}, 
+        {"label":"K205", "x":5.5, "y":2.5}, 
+        {"label":"K206", "x":6.5, "y":2.5}, 
+        {"label":"K207", "x":7.5, "y":2.5}, 
+        {"label":"K208", "x":8.5, "y":2.5}, 
+        {"label":"K209", "x":9.5, "y":2.5}, 
+        {"label":"K210", "x":10.5, "y":2.5}, 
+        {"label":"K211", "x":11.5, "y":2.5}, 
+        {"label":"K212", "x":12.5, "y":2.5}, 
+        {"label":"K213", "x":13.5, "y":2.5, "w":1.5}, 
+        {"label":"K300", "x":0, "y":3.5, "w":1.75}, 
+        {"label":"K301", "x":1.75, "y":3.5}, 
+        {"label":"K302", "x":2.75, "y":3.5}, 
+        {"label":"K303", "x":3.75, "y":3.5}, 
+        {"label":"K304", "x":4.75, "y":3.5}, 
+        {"label":"K305", "x":5.75, "y":3.5}, 
+        {"label":"K306", "x":6.75, "y":3.5}, 
+        {"label":"K307", "x":7.75, "y":3.5}, 
+        {"label":"K308", "x":8.75, "y":3.5}, 
+        {"label":"K309", "x":9.75, "y":3.5}, 
+        {"label":"K310", "x":10.75, "y":3.5}, 
+        {"label":"K311", "x":11.75, "y":3.5}, 
+        {"label":"K313", "x":12.75, "y":3.5, "w":2.25}, 
+        {"label":"K400", "x":0, "y":4.5, "w":2.25}, 
+        {"label":"K402", "x":2.25, "y":4.5}, 
+        {"label":"K403", "x":3.25, "y":4.5}, 
+        {"label":"K404", "x":4.25, "y":4.5}, 
+        {"label":"K405", "x":5.25, "y":4.5}, 
+        {"label":"K406", "x":6.25, "y":4.5}, 
+        {"label":"K407", "x":7.25, "y":4.5}, 
+        {"label":"K408", "x":8.25, "y":4.5}, 
+        {"label":"K409", "x":9.25, "y":4.5}, 
+        {"label":"K410", "x":10.25, "y":4.5}, 
+        {"label":"K411", "x":11.25, "y":4.5}, 
+        {"label":"K412", "x":12.25, "y":4.5, "w":2.75}, 
+        {"label":"K500", "x":0, "y":5.5, "w":1.25}, 
+        {"label":"K501", "x":1.25, "y":5.5, "w":1.25}, 
+        {"label":"K502", "x":2.5, "y":5.5, "w":1.25}, 
+        {"label":"K507", "x":3.75, "y":5.5, "w":6.25}, 
+        {"label":"K510", "x":10, "y":5.5, "w":1.25}, 
+        {"label":"K511", "x":11.25, "y":5.5, "w":1.25}, 
+        {"label":"K512", "x":12.5, "y":5.5, "w":1.25}, 
+        {"label":"K513", "x":13.75, "y":5.5, "w":1.25}
+      ]
+    },
+ 
+    "LAYOUT_ansi_wkl": {
+      "key_count": 71,
+      "layout": [
+        {"label":"K000", "x":0, "y":0}, 
+        {"label":"K001", "x":2, "y":0}, 
+        {"label":"K002", "x":3, "y":0}, 
+        {"label":"K003", "x":4, "y":0}, 
+        {"label":"K004", "x":5, "y":0}, 
+        {"label":"K005", "x":6.5, "y":0}, 
+        {"label":"K006", "x":7.5, "y":0}, 
+        {"label":"K007", "x":8.5, "y":0}, 
+        {"label":"K008", "x":9.5, "y":0}, 
+        {"label":"K009", "x":11, "y":0}, 
+        {"label":"K010", "x":12, "y":0}, 
+        {"label":"K011", "x":13, "y":0}, 
+        {"label":"K012", "x":14, "y":0}, 
+        {"label":"K100", "x":0, "y":1.5}, 
+        {"label":"K101", "x":1, "y":1.5}, 
+        {"label":"K102", "x":2, "y":1.5}, 
+        {"label":"K103", "x":3, "y":1.5}, 
+        {"label":"K104", "x":4, "y":1.5}, 
+        {"label":"K105", "x":5, "y":1.5}, 
+        {"label":"K106", "x":6, "y":1.5}, 
+        {"label":"K107", "x":7, "y":1.5}, 
+        {"label":"K108", "x":8, "y":1.5}, 
+        {"label":"K109", "x":9, "y":1.5}, 
+        {"label":"K110", "x":10, "y":1.5}, 
+        {"label":"K111", "x":11, "y":1.5}, 
+        {"label":"K112", "x":12, "y":1.5}, 
+        {"label":"K013", "x":13, "y":1.5, "w":2}, 
+        {"label":"K200", "x":0, "y":2.5, "w":1.5}, 
+        {"label":"K201", "x":1.5, "y":2.5}, 
+        {"label":"K202", "x":2.5, "y":2.5}, 
+        {"label":"K203", "x":3.5, "y":2.5}, 
+        {"label":"K204", "x":4.5, "y":2.5}, 
+        {"label":"K205", "x":5.5, "y":2.5}, 
+        {"label":"K206", "x":6.5, "y":2.5}, 
+        {"label":"K207", "x":7.5, "y":2.5}, 
+        {"label":"K208", "x":8.5, "y":2.5}, 
+        {"label":"K209", "x":9.5, "y":2.5}, 
+        {"label":"K210", "x":10.5, "y":2.5}, 
+        {"label":"K211", "x":11.5, "y":2.5}, 
+        {"label":"K212", "x":12.5, "y":2.5}, 
+        {"label":"K213", "x":13.5, "y":2.5, "w":1.5}, 
+        {"label":"K300", "x":0, "y":3.5, "w":1.75}, 
+        {"label":"K301", "x":1.75, "y":3.5}, 
+        {"label":"K302", "x":2.75, "y":3.5}, 
+        {"label":"K303", "x":3.75, "y":3.5}, 
+        {"label":"K304", "x":4.75, "y":3.5}, 
+        {"label":"K305", "x":5.75, "y":3.5}, 
+        {"label":"K306", "x":6.75, "y":3.5}, 
+        {"label":"K307", "x":7.75, "y":3.5}, 
+        {"label":"K308", "x":8.75, "y":3.5}, 
+        {"label":"K309", "x":9.75, "y":3.5}, 
+        {"label":"K310", "x":10.75, "y":3.5}, 
+        {"label":"K311", "x":11.75, "y":3.5}, 
+        {"label":"K313", "x":12.75, "y":3.5, "w":2.25}, 
+        {"label":"K400", "x":0, "y":4.5, "w":2.25}, 
+        {"label":"K402", "x":2.25, "y":4.5}, 
+        {"label":"K403", "x":3.25, "y":4.5}, 
+        {"label":"K404", "x":4.25, "y":4.5}, 
+        {"label":"K405", "x":5.25, "y":4.5}, 
+        {"label":"K406", "x":6.25, "y":4.5}, 
+        {"label":"K407", "x":7.25, "y":4.5}, 
+        {"label":"K408", "x":8.25, "y":4.5}, 
+        {"label":"K409", "x":9.25, "y":4.5}, 
+        {"label":"K410", "x":10.25, "y":4.5}, 
+        {"label":"K411", "x":11.25, "y":4.5}, 
+        {"label":"K412", "x":12.25, "y":4.5, "w":2.75}, 
+        {"label":"K500", "x":0, "y":5.5, "w":1.5}, 
+        {"label":"K502", "x":2.5, "y":5.5, "w":1.5}, 
+        {"label":"K507", "x":4, "y":5.5, "w":7}, 
+        {"label":"K511", "x":11, "y":5.5, "w":1.5}, 
+        {"label":"K513", "x":13.5, "y":5.5, "w":1.5}
+      ]
+    },
+
+    "LAYOUT_iso_wk": {
+      "key_count": 75,
+      "layout": [
+        {"label":"K000", "x":0, "y":0}, 
+        {"label":"K001", "x":2, "y":0}, 
+        {"label":"K002", "x":3, "y":0}, 
+        {"label":"K003", "x":4, "y":0}, 
+        {"label":"K004", "x":5, "y":0}, 
+        {"label":"K005", "x":6.5, "y":0}, 
+        {"label":"K006", "x":7.5, "y":0}, 
+        {"label":"K007", "x":8.5, "y":0}, 
+        {"label":"K008", "x":9.5, "y":0}, 
+        {"label":"K009", "x":11, "y":0}, 
+        {"label":"K010", "x":12, "y":0}, 
+        {"label":"K011", "x":13, "y":0}, 
+        {"label":"K012", "x":14, "y":0}, 
+        {"label":"K100", "x":0, "y":1.5}, 
+        {"label":"K101", "x":1, "y":1.5}, 
+        {"label":"K102", "x":2, "y":1.5}, 
+        {"label":"K103", "x":3, "y":1.5}, 
+        {"label":"K104", "x":4, "y":1.5}, 
+        {"label":"K105", "x":5, "y":1.5}, 
+        {"label":"K106", "x":6, "y":1.5}, 
+        {"label":"K107", "x":7, "y":1.5}, 
+        {"label":"K108", "x":8, "y":1.5}, 
+        {"label":"K109", "x":9, "y":1.5}, 
+        {"label":"K110", "x":10, "y":1.5}, 
+        {"label":"K111", "x":11, "y":1.5}, 
+        {"label":"K112", "x":12, "y":1.5}, 
+        {"label":"K013", "x":13, "y":1.5, "w":2}, 
+        {"label":"K200", "x":0, "y":2.5, "w":1.5}, 
+        {"label":"K201", "x":1.5, "y":2.5}, 
+        {"label":"K202", "x":2.5, "y":2.5}, 
+        {"label":"K203", "x":3.5, "y":2.5}, 
+        {"label":"K204", "x":4.5, "y":2.5}, 
+        {"label":"K205", "x":5.5, "y":2.5}, 
+        {"label":"K206", "x":6.5, "y":2.5}, 
+        {"label":"K207", "x":7.5, "y":2.5}, 
+        {"label":"K208", "x":8.5, "y":2.5}, 
+        {"label":"K209", "x":9.5, "y":2.5}, 
+        {"label":"K210", "x":10.5, "y":2.5}, 
+        {"label":"K211", "x":11.5, "y":2.5}, 
+        {"label":"K212", "x":12.5, "y":2.5}, 
+        {"label":"K300", "x":0, "y":3.5, "w":1.75}, 
+        {"label":"K301", "x":1.75, "y":3.5}, 
+        {"label":"K302", "x":2.75, "y":3.5}, 
+        {"label":"K303", "x":3.75, "y":3.5}, 
+        {"label":"K304", "x":4.75, "y":3.5}, 
+        {"label":"K305", "x":5.75, "y":3.5}, 
+        {"label":"K306", "x":6.75, "y":3.5}, 
+        {"label":"K307", "x":7.75, "y":3.5}, 
+        {"label":"K308", "x":8.75, "y":3.5}, 
+        {"label":"K309", "x":9.75, "y":3.5}, 
+        {"label":"K310", "x":10.75, "y":3.5}, 
+        {"label":"K311", "x":11.75, "y":3.5}, 
+        {"label":"K312", "x":12.75, "y":3.5}, 
+        {"label":"K313", "x":13.75, "y":2.5, "w":1.25, "h":2}, 
+        {"label":"K400", "x":0, "y":4.5, "w":1.25}, 
+        {"label":"K401", "x":1.25, "y":4.5}, 
+        {"label":"K402", "x":2.25, "y":4.5}, 
+        {"label":"K403", "x":3.25, "y":4.5}, 
+        {"label":"K404", "x":4.25, "y":4.5}, 
+        {"label":"K405", "x":5.25, "y":4.5}, 
+        {"label":"K406", "x":6.25, "y":4.5}, 
+        {"label":"K407", "x":7.25, "y":4.5}, 
+        {"label":"K408", "x":8.25, "y":4.5}, 
+        {"label":"K409", "x":9.25, "y":4.5}, 
+        {"label":"K410", "x":10.25, "y":4.5}, 
+        {"label":"K411", "x":11.25, "y":4.5}, 
+        {"label":"K412", "x":12.25, "y":4.5, "w":2.75}, 
+        {"label":"K500", "x":0, "y":5.5, "w":1.25}, 
+        {"label":"K501", "x":1.25, "y":5.5, "w":1.25}, 
+        {"label":"K502", "x":2.5, "y":5.5, "w":1.25}, 
+        {"label":"K507", "x":3.75, "y":5.5, "w":6.25}, 
+        {"label":"K510", "x":10, "y":5.5, "w":1.25}, 
+        {"label":"K511", "x":11.25, "y":5.5, "w":1.25}, 
+        {"label":"K512", "x":12.5, "y":5.5, "w":1.25}, 
+        {"label":"K513", "x":13.75, "y":5.5, "w":1.25}
+      ]
+    },
+ 
+    "LAYOUT_iso_wkl": {
+      "key_count": 72,
+      "layout": [
+        {"label":"K000", "x":0, "y":0}, 
+        {"label":"K001", "x":2, "y":0}, 
+        {"label":"K002", "x":3, "y":0}, 
+        {"label":"K003", "x":4, "y":0}, 
+        {"label":"K004", "x":5, "y":0}, 
+        {"label":"K005", "x":6.5, "y":0}, 
+        {"label":"K006", "x":7.5, "y":0}, 
+        {"label":"K007", "x":8.5, "y":0}, 
+        {"label":"K008", "x":9.5, "y":0}, 
+        {"label":"K009", "x":11, "y":0}, 
+        {"label":"K010", "x":12, "y":0}, 
+        {"label":"K011", "x":13, "y":0}, 
+        {"label":"K012", "x":14, "y":0}, 
+        {"label":"K100", "x":0, "y":1.5}, 
+        {"label":"K101", "x":1, "y":1.5}, 
+        {"label":"K102", "x":2, "y":1.5}, 
+        {"label":"K103", "x":3, "y":1.5}, 
+        {"label":"K104", "x":4, "y":1.5}, 
+        {"label":"K105", "x":5, "y":1.5}, 
+        {"label":"K106", "x":6, "y":1.5}, 
+        {"label":"K107", "x":7, "y":1.5}, 
+        {"label":"K108", "x":8, "y":1.5}, 
+        {"label":"K109", "x":9, "y":1.5}, 
+        {"label":"K110", "x":10, "y":1.5}, 
+        {"label":"K111", "x":11, "y":1.5}, 
+        {"label":"K112", "x":12, "y":1.5}, 
+        {"label":"K013", "x":13, "y":1.5, "w":2}, 
+        {"label":"K200", "x":0, "y":2.5, "w":1.5}, 
+        {"label":"K201", "x":1.5, "y":2.5}, 
+        {"label":"K202", "x":2.5, "y":2.5}, 
+        {"label":"K203", "x":3.5, "y":2.5}, 
+        {"label":"K204", "x":4.5, "y":2.5}, 
+        {"label":"K205", "x":5.5, "y":2.5}, 
+        {"label":"K206", "x":6.5, "y":2.5}, 
+        {"label":"K207", "x":7.5, "y":2.5}, 
+        {"label":"K208", "x":8.5, "y":2.5}, 
+        {"label":"K209", "x":9.5, "y":2.5}, 
+        {"label":"K210", "x":10.5, "y":2.5}, 
+        {"label":"K211", "x":11.5, "y":2.5}, 
+        {"label":"K212", "x":12.5, "y":2.5}, 
+        {"label":"K300", "x":0, "y":3.5, "w":1.75}, 
+        {"label":"K301", "x":1.75, "y":3.5}, 
+        {"label":"K302", "x":2.75, "y":3.5}, 
+        {"label":"K303", "x":3.75, "y":3.5}, 
+        {"label":"K304", "x":4.75, "y":3.5}, 
+        {"label":"K305", "x":5.75, "y":3.5}, 
+        {"label":"K306", "x":6.75, "y":3.5}, 
+        {"label":"K307", "x":7.75, "y":3.5}, 
+        {"label":"K308", "x":8.75, "y":3.5}, 
+        {"label":"K309", "x":9.75, "y":3.5}, 
+        {"label":"K310", "x":10.75, "y":3.5}, 
+        {"label":"K311", "x":11.75, "y":3.5}, 
+        {"label":"K312", "x":12.75, "y":3.5}, 
+        {"label":"K313", "x":13.75, "y":2.5, "w":1.25, "h":2}, 
+        {"label":"K400", "x":0, "y":4.5, "w":1.25}, 
+        {"label":"K401", "x":1.25, "y":4.5}, 
+        {"label":"K402", "x":2.25, "y":4.5}, 
+        {"label":"K403", "x":3.25, "y":4.5}, 
+        {"label":"K404", "x":4.25, "y":4.5}, 
+        {"label":"K405", "x":5.25, "y":4.5}, 
+        {"label":"K406", "x":6.25, "y":4.5}, 
+        {"label":"K407", "x":7.25, "y":4.5}, 
+        {"label":"K408", "x":8.25, "y":4.5}, 
+        {"label":"K409", "x":9.25, "y":4.5}, 
+        {"label":"K410", "x":10.25, "y":4.5}, 
+        {"label":"K411", "x":11.25, "y":4.5}, 
+        {"label":"K412", "x":12.25, "y":4.5, "w":2.75}, 
+        {"label":"K500", "x":0, "y":5.5, "w":1.5}, 
+        {"label":"K502", "x":2.5, "y":5.5, "w":1.5}, 
+        {"label":"K507", "x":4, "y":5.5, "w":7}, 
+        {"label":"K511", "x":11, "y":5.5, "w":1.5}, 
+        {"label":"K513", "x":13.5, "y":5.5, "w":1.5}
+      ]
+    }
+  }
+}
+

keyboards/toad/readme.md

@@ -10,5 +10,5 @@ Make examples for these keyboards (after setting up your build environment):
 
     make toad:default
 
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/vinta/info.json

@@ -0,0 +1,18 @@
+{
+  "keyboard_name": "vinta",
+  "url": "",
+  "maintainer": "Peioris",
+  "width": 16,
+  "height": 5,
+  "layouts": {
+    "LAYOUT_69_ansi": {
+        "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"~", "x":13, "y":0}, {"label":"|", "x":14, "y":0}, {"label":"Del", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"PgUp", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"PgDn", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"End", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4}, {"label":"Reset", "x":11, "y":4}, {"label":"Ctrl", "x":12, "y":4}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}]
+    },
+    "LAYOUT_68_tada": {
+        "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"~", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Del", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"PgUp", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"PgDn", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4}, {"label":"Menu", "x":11, "y":4}, {"label":"Ctrl", "x":12, "y":4}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}]
+    },
+    "LAYOUT_67_ansi": {
+        "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"~", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Del", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"PgUp", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"PgDn", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Ctrl", "x":11.25, "y":4, "w":1.25}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}]
+    }
+  }
+}

keyboards/vinta/keymaps/default/keymap.c

@@ -33,8 +33,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [0] = LAYOUT_69_ansi(
   KC_ESC,  KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,   KC_DEL,\
   KC_TAB,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC, KC_RBRC,          KC_BSPC, KC_PGUP,\
-  KC_CAPS, KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT,                   KC_ENT,  KC_PGUP,\
-  KC_LSFT, KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT, KC_SLSH,          KC_RSFT,          KC_UP,   KC_PGDN,\
+  KC_CAPS, KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT,                   KC_ENT,  KC_PGDN,\
+  KC_LSFT, KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT, KC_SLSH,          KC_RSFT,          KC_UP,   KC_END, \
   KC_LCTL, KC_LGUI,KC_LALT,                KC_SPC,                         KC_RALT, RESET,            KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
 };
 
@@ -48,4 +48,4 @@ void matrix_scan_user(void) {
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   return true;
-}
+}

keyboards/vinta/vinta.h

@@ -22,4 +22,34 @@
     { K40, K41, K42, XXX, XXX, K45, XXX, XXX, XXX, K49, K4A, XXX, K4C, K4D, K4E, K4F }  \
 }
 
-#endif
+#define LAYOUT_68_tada( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D,      K0F, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,      K1E, K1F, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,           K2E, K2F, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A,      K3C,      K3E, K3F, \
+    K40, K41, K42,           K45,                K49, K4A,      K4C, K4D, K4E, K4F  \
+) \
+{ \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, XXX, K0F }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, XXX, K1E, K1F }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, XXX, XXX, K2E, K2F }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, XXX, K3C, XXX, K3E, K3F }, \
+    { K40, K41, K42, XXX, XXX, K45, XXX, XXX, XXX, K49, K4A, XXX, XXX, K4D, K4E, K4F }  \
+}
+
+#define LAYOUT_67_ansi( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D,      K0F, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,      K1E, K1F, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,           K2E, K2F, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A,      K3C,      K3E, K3F, \
+    K40, K41, K42,           K45,                K49, K4A,           K4D, K4E, K4F  \
+) \
+{ \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, XXX, K0F }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, XXX, K1E, K1F }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, XXX, XXX, K2E, K2F }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, XXX, K3C, XXX, K3E, K3F }, \
+    { K40, K41, K42, XXX, XXX, K45, XXX, XXX, XXX, K49, K4A, XXX, XXX, K4D, K4E, K4F }  \
+}
+
+#endif

keyboards/xd60/keymaps/crd_ansi/README.md

@@ -0,0 +1,52 @@
+# ANSI Layout
+
+This is the standard ANSI keymap that I use on all of my 60% boards. This keymap
+includes a single function layer available by holding the designated key on the
+bottom row.
+
+I don't ever use Caps Lock, so that keycode is not mapped anywhere. In place of
+the usual Caps Lock key, I have the following bnehaviour encoded: Escape when tapped
+and Control when held.
+
+I also have the bottom right mod cluster mapped to navigational direction keys when tapped.
+Shift = Up, Alt = Down, Ctrl = Right, Fn = Left. When held, these keys send the usual modifier
+signals.
+
+```
+/* Base layer
+ * ,-----------------------------------------------------------------------------------------.
+ * |  `  |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  | Backspace |
+ * |-----------------------------------------------------------------------------------------+
+ * |  Tab   |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |    \   |
+ * |-----------------------------------------------------------------------------------------+
+ * | Esc/Ctrl|  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
+ * |-----------------------------------------------------------------------------------------+
+ * |   Shift   |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  ?  |  Shift          |
+ * |-----------------------------------------------------------------------------------------+
+ * | Ctrl |  Alt  |  Cmd  |               Space               |  Cmd  |  Fn  |  Alt  |  Ctrl |
+ * `-----------------------------------------------------------------------------------------'
+ */
+```
+
+While holding the function key, you have access to the following layout. Any key
+not indicated is considered "transparent" and sends the signal indicated in the
+layer below. This function later gets you dedicated access to Escape and Delete
+keys, function keys on numbers, WASD directions, other navigation, multimedia
+controls, RGB (underglow) controls, and firmware reset (DFU mode).
+
+```
+/* Fn layer
+ * ,-----------------------------------------------------------------------------------------.
+ * | Esc | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 |  Del      |
+ * |-----------------------------------------------------------------------------------------+
+ * |        | Home|  Up | End |     |     |     |     | Mute|     |     | Pg+ | Pg- | Reset  |
+ * |-----------------------------------------------------------------------------------------+
+ * |         | Left| Down|Right|     |     |     |Brt- |Vol- |Vol+ |Brt+ |     |  RGB Toggle |
+ * |-----------------------------------------------------------------------------------------+
+ * |           |     |     |     |     |     |     |     |R(Bt-)|R(Bt+)|R(Rot)|              |
+ * |-----------------------------------------------------------------------------------------+
+ * |      |       |       |                                   |       |      |       |       |
+ * `-----------------------------------------------------------------------------------------'
+ */
+
+```

keyboards/xd60/keymaps/crd_ansi/keymap.c

@@ -0,0 +1,30 @@
+#include QMK_KEYBOARD_H
+
+enum keyboard_layers {
+  _BL = 0, // Base Layer
+  _FL     // Function Layer
+};
+
+// Custom #defined keycodes (shorter macros for readability)
+#define KC_CTES CTL_T(KC_ESC)
+#define KC_RSUP RSFT_T(KC_UP)
+#define KC_FNLT LT(_FL, KC_LEFT)
+#define KC_RADN RALT_T(KC_DOWN)
+#define KC_RCRT RCTL_T(KC_RIGHT)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	[_BL] = LAYOUT_60_ansi(
+		KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
+		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+		KC_CTES, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+		KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSUP,
+		KC_LCTL, KC_LALT, KC_LGUI,                            KC_SPC,                             KC_RGUI, KC_FNLT, KC_RADN, KC_RCRT
+	),
+	[_FL] = LAYOUT_60_ansi(
+		KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+		_______, KC_HOME, KC_UP,   KC_END,  _______, _______, _______, _______, KC_MUTE, _______, _______, KC_PGDN, KC_PGUP, RESET,
+		_______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, KC_SLCK, KC_VOLD, KC_VOLU, KC_PAUS, _______, _______, RGB_TOG,
+		_______, _______, _______, _______, _______, _______, _______, _______, RGB_VAD, RGB_VAI, RGB_MOD, _______,
+		_______, _______,          _______,                   _______,                            _______, _______, _______, _______
+	)
+};

keyboards/xmmx/info.json

@@ -0,0 +1,475 @@
+{
+    "keyboard_name": "XMMX",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 18.25,
+    "height": 6.5,
+    "layouts": {
+        "LAYOUT_all": {
+            "key_count": 96,
+            "layout": [
+                {"label":"Esc", "x":0, "y":0}, 
+                {"label":"F1", "x":2, "y":0}, 
+                {"label":"F2", "x":3, "y":0}, 
+                {"label":"F3", "x":4, "y":0}, 
+                {"label":"F4", "x":5, "y":0}, 
+                {"label":"F5", "x":6.5, "y":0}, 
+                {"label":"F6", "x":7.5, "y":0}, 
+                {"label":"F7", "x":8.5, "y":0}, 
+                {"label":"F8", "x":9.5, "y":0}, 
+                {"label":"F9", "x":11, "y":0}, 
+                {"label":"F10", "x":12, "y":0}, 
+                {"label":"F11", "x":13, "y":0}, 
+                {"label":"F12", "x":14, "y":0}, 
+                {"label":"PrtSc", "x":15.25, "y":0}, 
+                {"label":"Scroll Lock", "x":16.25, "y":0}, 
+                {"label":"Pause", "x":17.25, "y":0}, 
+                {"label":"~", "x":0, "y":1.5}, 
+                {"label":"!", "x":1, "y":1.5}, 
+                {"label":"@", "x":2, "y":1.5}, 
+                {"label":"#", "x":3, "y":1.5}, 
+                {"label":"$", "x":4, "y":1.5}, 
+                {"label":"%", "x":5, "y":1.5}, 
+                {"label":"^", "x":6, "y":1.5}, 
+                {"label":"&", "x":7, "y":1.5}, 
+                {"label":"*", "x":8, "y":1.5}, 
+                {"label":"(", "x":9, "y":1.5}, 
+                {"label":")", "x":10, "y":1.5}, 
+                {"label":"_", "x":11, "y":1.5}, 
+                {"label":"+", "x":12, "y":1.5}, 
+                {"label":"Back Space", "x":13, "y":1.5}, 
+                {"label":"Back Space", "x":14, "y":1.5}, 
+                {"label":"Insert", "x":15.25, "y":1.5}, 
+                {"label":"Home", "x":16.25, "y":1.5}, 
+                {"label":"PgUp", "x":17.25, "y":1.5}, 
+                {"label":"Tab", "x":0, "y":2.5, "w":1.5}, 
+                {"label":"Q", "x":1.5, "y":2.5}, 
+                {"label":"W", "x":2.5, "y":2.5}, 
+                {"label":"E", "x":3.5, "y":2.5}, 
+                {"label":"R", "x":4.5, "y":2.5}, 
+                {"label":"T", "x":5.5, "y":2.5}, 
+                {"label":"Y", "x":6.5, "y":2.5}, 
+                {"label":"U", "x":7.5, "y":2.5}, 
+                {"label":"I", "x":8.5, "y":2.5}, 
+                {"label":"O", "x":9.5, "y":2.5}, 
+                {"label":"P", "x":10.5, "y":2.5}, 
+                {"label":"{", "x":11.5, "y":2.5}, 
+                {"label":"}", "x":12.5, "y":2.5}, 
+                {"label":"|", "x":13.5, "y":2.5, "w":1.5}, 
+                {"label":"Delete", "x":15.25, "y":2.5}, 
+                {"label":"End", "x":16.25, "y":2.5}, 
+                {"label":"PgDn", "x":17.25, "y":2.5}, 
+                {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, 
+                {"label":"A", "x":1.75, "y":3.5}, 
+                {"label":"S", "x":2.75, "y":3.5}, 
+                {"label":"D", "x":3.75, "y":3.5}, 
+                {"label":"F", "x":4.75, "y":3.5}, 
+                {"label":"G", "x":5.75, "y":3.5}, 
+                {"label":"H", "x":6.75, "y":3.5}, 
+                {"label":"J", "x":7.75, "y":3.5}, 
+                {"label":"K", "x":8.75, "y":3.5}, 
+                {"label":"L", "x":9.75, "y":3.5}, 
+                {"label":":", "x":10.75, "y":3.5}, 
+                {"label":"\"", "x":11.75, "y":3.5}, 
+                {"label":"~", "x":12.75, "y":3.5}, 
+                {"label":"Enter", "x":13.75, "y":3.5, "w":1.25}, 
+                {"x":15.25, "y":3.5}, 
+                {"x":16.25, "y":3.5}, 
+                {"x":17.25, "y":3.5}, 
+                {"label":"Shift", "x":0, "y":4.5, "w":1.25}, 
+                {"label":"|", "x":1.25, "y":4.5}, 
+                {"label":"Z", "x":2.25, "y":4.5}, 
+                {"label":"X", "x":3.25, "y":4.5}, 
+                {"label":"C", "x":4.25, "y":4.5}, 
+                {"label":"V", "x":5.25, "y":4.5}, 
+                {"label":"B", "x":6.25, "y":4.5}, 
+                {"label":"N", "x":7.25, "y":4.5}, 
+                {"label":"M", "x":8.25, "y":4.5}, 
+                {"label":"<", "x":9.25, "y":4.5}, 
+                {"label":">", "x":10.25, "y":4.5}, 
+                {"label":"?", "x":11.25, "y":4.5}, 
+                {"label":"Shift", "x":12.25, "y":4.5, "w":1.75}, 
+                {"label":"Fn", "x":14, "y":4.5}, 
+                {"x":15.25, "y":4.5}, 
+                {"label":"Up", "x":16.25, "y":4.5}, 
+                {"x":17.25, "y":4.5}, 
+                {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, 
+                {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, 
+                {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, 
+                {"label":"Space", "x":3.75, "y":5.5, "w":6.25}, 
+                {"label":"Alt", "x":10, "y":5.5, "w":1.25}, 
+                {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, 
+                {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, 
+                {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, 
+                {"label":"Left", "x":15.25, "y":5.5}, 
+                {"label":"Down", "x":16.25, "y":5.5}, 
+                {"label":"Right", "x":17.25, "y":5.5}
+            ]
+        },
+        "LAYOUT_tkl_ansi": {
+            "key_count": 87,
+            "layout": [
+                {"label":"Esc", "x":0, "y":0}, 
+                {"label":"F1", "x":2, "y":0}, 
+                {"label":"F2", "x":3, "y":0}, 
+                {"label":"F3", "x":4, "y":0}, 
+                {"label":"F4", "x":5, "y":0}, 
+                {"label":"F5", "x":6.5, "y":0}, 
+                {"label":"F6", "x":7.5, "y":0}, 
+                {"label":"F7", "x":8.5, "y":0}, 
+                {"label":"F8", "x":9.5, "y":0}, 
+                {"label":"F9", "x":11, "y":0}, 
+                {"label":"F10", "x":12, "y":0}, 
+                {"label":"F11", "x":13, "y":0}, 
+                {"label":"F12", "x":14, "y":0}, 
+                {"label":"PrtSc", "x":15.25, "y":0}, 
+                {"label":"Scroll Lock", "x":16.25, "y":0}, 
+                {"label":"Pause", "x":17.25, "y":0}, 
+                {"label":"~", "x":0, "y":1.5}, 
+                {"label":"!", "x":1, "y":1.5}, 
+                {"label":"@", "x":2, "y":1.5}, 
+                {"label":"#", "x":3, "y":1.5}, 
+                {"label":"$", "x":4, "y":1.5}, 
+                {"label":"%", "x":5, "y":1.5}, 
+                {"label":"^", "x":6, "y":1.5}, 
+                {"label":"&", "x":7, "y":1.5}, 
+                {"label":"*", "x":8, "y":1.5}, 
+                {"label":"(", "x":9, "y":1.5}, 
+                {"label":")", "x":10, "y":1.5}, 
+                {"label":"_", "x":11, "y":1.5}, 
+                {"label":"+", "x":12, "y":1.5}, 
+                {"label":"Backspace", "x":13, "y":1.5, "w":2}, 
+                {"label":"Insert", "x":15.25, "y":1.5}, 
+                {"label":"Home", "x":16.25, "y":1.5}, 
+                {"label":"PgUp", "x":17.25, "y":1.5}, 
+                {"label":"Tab", "x":0, "y":2.5, "w":1.5}, 
+                {"label":"Q", "x":1.5, "y":2.5}, 
+                {"label":"W", "x":2.5, "y":2.5}, 
+                {"label":"E", "x":3.5, "y":2.5}, 
+                {"label":"R", "x":4.5, "y":2.5}, 
+                {"label":"T", "x":5.5, "y":2.5}, 
+                {"label":"Y", "x":6.5, "y":2.5}, 
+                {"label":"U", "x":7.5, "y":2.5}, 
+                {"label":"I", "x":8.5, "y":2.5}, 
+                {"label":"O", "x":9.5, "y":2.5}, 
+                {"label":"P", "x":10.5, "y":2.5}, 
+                {"label":"{", "x":11.5, "y":2.5}, 
+                {"label":"}", "x":12.5, "y":2.5}, 
+                {"label":"|", "x":13.5, "y":2.5, "w":1.5}, 
+                {"label":"Delete", "x":15.25, "y":2.5}, 
+                {"label":"End", "x":16.25, "y":2.5}, 
+                {"label":"PgDn", "x":17.25, "y":2.5}, 
+                {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, 
+                {"label":"A", "x":1.75, "y":3.5}, 
+                {"label":"S", "x":2.75, "y":3.5}, 
+                {"label":"D", "x":3.75, "y":3.5}, 
+                {"label":"F", "x":4.75, "y":3.5}, 
+                {"label":"G", "x":5.75, "y":3.5}, 
+                {"label":"H", "x":6.75, "y":3.5}, 
+                {"label":"J", "x":7.75, "y":3.5}, 
+                {"label":"K", "x":8.75, "y":3.5}, 
+                {"label":"L", "x":9.75, "y":3.5}, 
+                {"label":":", "x":10.75, "y":3.5}, 
+                {"label":"\"", "x":11.75, "y":3.5}, 
+                {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, 
+                {"label":"Shift", "x":0, "y":4.5, "w":2.25}, 
+                {"label":"Z", "x":2.25, "y":4.5}, 
+                {"label":"X", "x":3.25, "y":4.5}, 
+                {"label":"C", "x":4.25, "y":4.5}, 
+                {"label":"V", "x":5.25, "y":4.5}, 
+                {"label":"B", "x":6.25, "y":4.5}, 
+                {"label":"N", "x":7.25, "y":4.5}, 
+                {"label":"M", "x":8.25, "y":4.5}, 
+                {"label":"<", "x":9.25, "y":4.5}, 
+                {"label":">", "x":10.25, "y":4.5}, 
+                {"label":"?", "x":11.25, "y":4.5}, 
+                {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, 
+                {"label":"Up", "x":16.25, "y":4.5}, 
+                {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, 
+                {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, 
+                {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, 
+                {"label":"Space", "x":3.75, "y":5.5, "w":6.25}, 
+                {"label":"Alt", "x":10, "y":5.5, "w":1.25}, 
+                {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, 
+                {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, 
+                {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, 
+                {"label":"Left", "x":15.25, "y":5.5}, 
+                {"label":"Down", "x":16.25, "y":5.5}, 
+                {"label":"Right", "x":17.25, "y":5.5}
+            ]
+        },
+        "LAYOUT_tkl_ansi_wkl": {
+            "key_count": 84,
+            "layout": [
+                {"label":"Esc", "x":0, "y":0}, 
+                {"label":"F1", "x":2, "y":0}, 
+                {"label":"F2", "x":3, "y":0}, 
+                {"label":"F3", "x":4, "y":0}, 
+                {"label":"F4", "x":5, "y":0}, 
+                {"label":"F5", "x":6.5, "y":0}, 
+                {"label":"F6", "x":7.5, "y":0}, 
+                {"label":"F7", "x":8.5, "y":0}, 
+                {"label":"F8", "x":9.5, "y":0}, 
+                {"label":"F9", "x":11, "y":0}, 
+                {"label":"F10", "x":12, "y":0}, 
+                {"label":"F11", "x":13, "y":0}, 
+                {"label":"F12", "x":14, "y":0}, 
+                {"label":"PrtSc", "x":15.25, "y":0}, 
+                {"label":"Scroll Lock", "x":16.25, "y":0}, 
+                {"label":"Pause", "x":17.25, "y":0}, 
+                {"label":"~", "x":0, "y":1.5}, 
+                {"label":"!", "x":1, "y":1.5}, 
+                {"label":"@", "x":2, "y":1.5}, 
+                {"label":"#", "x":3, "y":1.5}, 
+                {"label":"$", "x":4, "y":1.5}, 
+                {"label":"%", "x":5, "y":1.5}, 
+                {"label":"^", "x":6, "y":1.5}, 
+                {"label":"&", "x":7, "y":1.5}, 
+                {"label":"*", "x":8, "y":1.5}, 
+                {"label":"(", "x":9, "y":1.5}, 
+                {"label":")", "x":10, "y":1.5}, 
+                {"label":"_", "x":11, "y":1.5}, 
+                {"label":"+", "x":12, "y":1.5}, 
+                {"label":"Backspace", "x":13, "y":1.5, "w":2}, 
+                {"label":"Insert", "x":15.25, "y":1.5}, 
+                {"label":"Home", "x":16.25, "y":1.5}, 
+                {"label":"PgUp", "x":17.25, "y":1.5}, 
+                {"label":"Tab", "x":0, "y":2.5, "w":1.5}, 
+                {"label":"Q", "x":1.5, "y":2.5}, 
+                {"label":"W", "x":2.5, "y":2.5}, 
+                {"label":"E", "x":3.5, "y":2.5}, 
+                {"label":"R", "x":4.5, "y":2.5}, 
+                {"label":"T", "x":5.5, "y":2.5}, 
+                {"label":"Y", "x":6.5, "y":2.5}, 
+                {"label":"U", "x":7.5, "y":2.5}, 
+                {"label":"I", "x":8.5, "y":2.5}, 
+                {"label":"O", "x":9.5, "y":2.5}, 
+                {"label":"P", "x":10.5, "y":2.5}, 
+                {"label":"{", "x":11.5, "y":2.5}, 
+                {"label":"}", "x":12.5, "y":2.5}, 
+                {"label":"|", "x":13.5, "y":2.5, "w":1.5}, 
+                {"label":"Delete", "x":15.25, "y":2.5}, 
+                {"label":"End", "x":16.25, "y":2.5}, 
+                {"label":"PgDn", "x":17.25, "y":2.5}, 
+                {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, 
+                {"label":"A", "x":1.75, "y":3.5}, 
+                {"label":"S", "x":2.75, "y":3.5}, 
+                {"label":"D", "x":3.75, "y":3.5}, 
+                {"label":"F", "x":4.75, "y":3.5}, 
+                {"label":"G", "x":5.75, "y":3.5}, 
+                {"label":"H", "x":6.75, "y":3.5}, 
+                {"label":"J", "x":7.75, "y":3.5}, 
+                {"label":"K", "x":8.75, "y":3.5}, 
+                {"label":"L", "x":9.75, "y":3.5}, 
+                {"label":":", "x":10.75, "y":3.5}, 
+                {"label":"\"", "x":11.75, "y":3.5}, 
+                {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, 
+                {"label":"Shift", "x":0, "y":4.5, "w":2.25}, 
+                {"label":"Z", "x":2.25, "y":4.5}, 
+                {"label":"X", "x":3.25, "y":4.5}, 
+                {"label":"C", "x":4.25, "y":4.5}, 
+                {"label":"V", "x":5.25, "y":4.5}, 
+                {"label":"B", "x":6.25, "y":4.5}, 
+                {"label":"N", "x":7.25, "y":4.5}, 
+                {"label":"M", "x":8.25, "y":4.5}, 
+                {"label":"<", "x":9.25, "y":4.5}, 
+                {"label":">", "x":10.25, "y":4.5}, 
+                {"label":"?", "x":11.25, "y":4.5}, 
+                {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, 
+                {"label":"Up", "x":16.25, "y":4.5}, 
+                {"label":"Ctrl", "x":0, "y":5.5, "w":1.5}, 
+                {"label":"Alt", "x":2.5, "y":5.5, "w":1.5}, 
+                {"label":"Space", "x":4, "y":5.5, "w":7}, 
+                {"label":"Alt", "x":11, "y":5.5, "w":1.5}, 
+                {"label":"Ctrl", "x":13.5, "y":5.5, "w":1.5}, 
+                {"label":"Left", "x":15.25, "y":5.5}, 
+                {"label":"Down", "x":16.25, "y":5.5}, 
+                {"label":"Right", "x":17.25, "y":5.5}
+            ]
+        },
+        "LAYOUT_tkl_iso": {
+            "key_count": 88,
+            "layout": [
+                {"label":"Esc", "x":0, "y":0}, 
+                {"label":"F1", "x":2, "y":0}, 
+                {"label":"F2", "x":3, "y":0}, 
+                {"label":"F3", "x":4, "y":0}, 
+                {"label":"F4", "x":5, "y":0}, 
+                {"label":"F5", "x":6.5, "y":0}, 
+                {"label":"F6", "x":7.5, "y":0}, 
+                {"label":"F7", "x":8.5, "y":0}, 
+                {"label":"F8", "x":9.5, "y":0}, 
+                {"label":"F9", "x":11, "y":0}, 
+                {"label":"F10", "x":12, "y":0}, 
+                {"label":"F11", "x":13, "y":0}, 
+                {"label":"F12", "x":14, "y":0}, 
+                {"label":"PrtSc", "x":15.25, "y":0}, 
+                {"label":"Scroll Lock", "x":16.25, "y":0}, 
+                {"label":"Pause", "x":17.25, "y":0}, 
+                {"label":"\u00ac", "x":0, "y":1.5}, 
+                {"label":"!", "x":1, "y":1.5}, 
+                {"label":"\"", "x":2, "y":1.5}, 
+                {"label":"\u00a3", "x":3, "y":1.5}, 
+                {"label":"$", "x":4, "y":1.5}, 
+                {"label":"%", "x":5, "y":1.5}, 
+                {"label":"^", "x":6, "y":1.5}, 
+                {"label":"&", "x":7, "y":1.5}, 
+                {"label":"*", "x":8, "y":1.5}, 
+                {"label":"(", "x":9, "y":1.5}, 
+                {"label":")", "x":10, "y":1.5}, 
+                {"label":"_", "x":11, "y":1.5}, 
+                {"label":"+", "x":12, "y":1.5}, 
+                {"label":"Backspace", "x":13, "y":1.5, "w":2}, 
+                {"label":"Insert", "x":15.25, "y":1.5}, 
+                {"label":"Home", "x":16.25, "y":1.5}, 
+                {"label":"PgUp", "x":17.25, "y":1.5}, 
+                {"label":"Tab", "x":0, "y":2.5, "w":1.5}, 
+                {"label":"Q", "x":1.5, "y":2.5}, 
+                {"label":"W", "x":2.5, "y":2.5}, 
+                {"label":"E", "x":3.5, "y":2.5}, 
+                {"label":"R", "x":4.5, "y":2.5}, 
+                {"label":"T", "x":5.5, "y":2.5}, 
+                {"label":"Y", "x":6.5, "y":2.5}, 
+                {"label":"U", "x":7.5, "y":2.5}, 
+                {"label":"I", "x":8.5, "y":2.5}, 
+                {"label":"O", "x":9.5, "y":2.5}, 
+                {"label":"P", "x":10.5, "y":2.5}, 
+                {"label":"{", "x":11.5, "y":2.5}, 
+                {"label":"}", "x":12.5, "y":2.5}, 
+                {"label":"Delete", "x":15.25, "y":2.5}, 
+                {"label":"End", "x":16.25, "y":2.5}, 
+                {"label":"PgDn", "x":17.25, "y":2.5}, 
+                {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, 
+                {"label":"A", "x":1.75, "y":3.5}, 
+                {"label":"S", "x":2.75, "y":3.5}, 
+                {"label":"D", "x":3.75, "y":3.5}, 
+                {"label":"F", "x":4.75, "y":3.5}, 
+                {"label":"G", "x":5.75, "y":3.5}, 
+                {"label":"H", "x":6.75, "y":3.5}, 
+                {"label":"J", "x":7.75, "y":3.5}, 
+                {"label":"K", "x":8.75, "y":3.5}, 
+                {"label":"L", "x":9.75, "y":3.5}, 
+                {"label":":", "x":10.75, "y":3.5}, 
+                {"label":"@", "x":11.75, "y":3.5}, 
+                {"label":"~", "x":12.75, "y":3.5}, 
+                {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2}, 
+                {"label":"Shift", "x":0, "y":4.5, "w":1.25}, 
+                {"label":"|", "x":1.25, "y":4.5}, 
+                {"label":"Z", "x":2.25, "y":4.5}, 
+                {"label":"X", "x":3.25, "y":4.5}, 
+                {"label":"C", "x":4.25, "y":4.5}, 
+                {"label":"V", "x":5.25, "y":4.5}, 
+                {"label":"B", "x":6.25, "y":4.5}, 
+                {"label":"N", "x":7.25, "y":4.5}, 
+                {"label":"M", "x":8.25, "y":4.5}, 
+                {"label":"<", "x":9.25, "y":4.5}, 
+                {"label":">", "x":10.25, "y":4.5}, 
+                {"label":"?", "x":11.25, "y":4.5}, 
+                {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, 
+                {"label":"Up", "x":16.25, "y":4.5}, 
+                {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, 
+                {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, 
+                {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, 
+                {"label":"Space", "x":3.75, "y":5.5, "w":6.25}, 
+                {"label":"AltGr", "x":10, "y":5.5, "w":1.25}, 
+                {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, 
+                {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, 
+                {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, 
+                {"label":"Left", "x":15.25, "y":5.5}, 
+                {"label":"Down", "x":16.25, "y":5.5}, 
+                {"label":"Right", "x":17.25, "y":5.5}
+            ]
+        },
+        "LAYOUT_tkl_iso_wkl": {
+            "key_count": 85,
+            "layout": [
+                {"label":"Esc", "x":0, "y":0}, 
+                {"label":"F1", "x":2, "y":0}, 
+                {"label":"F2", "x":3, "y":0}, 
+                {"label":"F3", "x":4, "y":0}, 
+                {"label":"F4", "x":5, "y":0}, 
+                {"label":"F5", "x":6.5, "y":0}, 
+                {"label":"F6", "x":7.5, "y":0}, 
+                {"label":"F7", "x":8.5, "y":0}, 
+                {"label":"F8", "x":9.5, "y":0}, 
+                {"label":"F9", "x":11, "y":0}, 
+                {"label":"F10", "x":12, "y":0}, 
+                {"label":"F11", "x":13, "y":0}, 
+                {"label":"F12", "x":14, "y":0}, 
+                {"label":"PrtSc", "x":15.25, "y":0}, 
+                {"label":"Scroll Lock", "x":16.25, "y":0}, 
+                {"label":"Pause", "x":17.25, "y":0}, 
+                {"label":"\u00ac", "x":0, "y":1.5}, 
+                {"label":"!", "x":1, "y":1.5}, 
+                {"label":"\"", "x":2, "y":1.5}, 
+                {"label":"\u00a3", "x":3, "y":1.5}, 
+                {"label":"$", "x":4, "y":1.5}, 
+                {"label":"%", "x":5, "y":1.5}, 
+                {"label":"^", "x":6, "y":1.5}, 
+                {"label":"&", "x":7, "y":1.5}, 
+                {"label":"*", "x":8, "y":1.5}, 
+                {"label":"(", "x":9, "y":1.5}, 
+                {"label":")", "x":10, "y":1.5}, 
+                {"label":"_", "x":11, "y":1.5}, 
+                {"label":"+", "x":12, "y":1.5}, 
+                {"label":"Backspace", "x":13, "y":1.5, "w":2}, 
+                {"label":"Insert", "x":15.25, "y":1.5}, 
+                {"label":"Home", "x":16.25, "y":1.5}, 
+                {"label":"PgUp", "x":17.25, "y":1.5}, 
+                {"label":"Tab", "x":0, "y":2.5, "w":1.5}, 
+                {"label":"Q", "x":1.5, "y":2.5}, 
+                {"label":"W", "x":2.5, "y":2.5}, 
+                {"label":"E", "x":3.5, "y":2.5}, 
+                {"label":"R", "x":4.5, "y":2.5}, 
+                {"label":"T", "x":5.5, "y":2.5}, 
+                {"label":"Y", "x":6.5, "y":2.5}, 
+                {"label":"U", "x":7.5, "y":2.5}, 
+                {"label":"I", "x":8.5, "y":2.5}, 
+                {"label":"O", "x":9.5, "y":2.5}, 
+                {"label":"P", "x":10.5, "y":2.5}, 
+                {"label":"{", "x":11.5, "y":2.5}, 
+                {"label":"}", "x":12.5, "y":2.5}, 
+                {"label":"Delete", "x":15.25, "y":2.5}, 
+                {"label":"End", "x":16.25, "y":2.5}, 
+                {"label":"PgDn", "x":17.25, "y":2.5}, 
+                {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, 
+                {"label":"A", "x":1.75, "y":3.5}, 
+                {"label":"S", "x":2.75, "y":3.5}, 
+                {"label":"D", "x":3.75, "y":3.5}, 
+                {"label":"F", "x":4.75, "y":3.5}, 
+                {"label":"G", "x":5.75, "y":3.5}, 
+                {"label":"H", "x":6.75, "y":3.5}, 
+                {"label":"J", "x":7.75, "y":3.5}, 
+                {"label":"K", "x":8.75, "y":3.5}, 
+                {"label":"L", "x":9.75, "y":3.5}, 
+                {"label":":", "x":10.75, "y":3.5}, 
+                {"label":"@", "x":11.75, "y":3.5}, 
+                {"label":"~", "x":12.75, "y":3.5}, 
+                {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2}, 
+                {"label":"Shift", "x":0, "y":4.5, "w":1.25}, 
+                {"label":"|", "x":1.25, "y":4.5}, 
+                {"label":"Z", "x":2.25, "y":4.5}, 
+                {"label":"X", "x":3.25, "y":4.5}, 
+                {"label":"C", "x":4.25, "y":4.5}, 
+                {"label":"V", "x":5.25, "y":4.5}, 
+                {"label":"B", "x":6.25, "y":4.5}, 
+                {"label":"N", "x":7.25, "y":4.5}, 
+                {"label":"M", "x":8.25, "y":4.5}, 
+                {"label":"<", "x":9.25, "y":4.5}, 
+                {"label":">", "x":10.25, "y":4.5}, 
+                {"label":"?", "x":11.25, "y":4.5}, 
+                {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, 
+                {"label":"Up", "x":16.25, "y":4.5}, 
+                {"label":"Ctrl", "x":0, "y":5.5, "w":1.5}, 
+                {"label":"Alt", "x":2.5, "y":5.5, "w":1.5}, 
+                {"label":"Space", "x":4, "y":5.5, "w":7}, 
+                {"label":"AltGr", "x":11, "y":5.5, "w":1.5}, 
+                {"label":"Ctrl", "x":13.5, "y":5.5, "w":1.5}, 
+                {"label":"Left", "x":15.25, "y":5.5}, 
+                {"label":"Down", "x":16.25, "y":5.5}, 
+                {"label":"Right", "x":17.25, "y":5.5}
+            ]
+        }
+    }
+}
+

keyboards/xmmx/keymaps/ansi_wk/keymap.c

@@ -2,12 +2,13 @@
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-	LAYOUT_ansi_wk(
-	KC_ESC,   KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,                            KC_PSCR, KC_SLCK, KC_PAUS, \
+  LAYOUT_tkl_ansi(
+    KC_ESC,           KC_F1, KC_F2, KC_F3, KC_F4,     KC_F5, KC_F6, KC_F7, KC_F8,     KC_F9, KC_F10, KC_F11, KC_F12,            KC_PSCR, KC_SLCK, KC_PAUS, \
     KC_GRV,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,KC_MINS, KC_EQL,  KC_BSPC,           KC_INS,KC_HOME, KC_PGUP,   \
     KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,KC_LBRC, KC_RBRC, KC_BSLS,           KC_DEL, KC_END, KC_PGDN,   \
     KC_CAPS,  KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,          KC_ENT,                                    \
     KC_LSFT,          KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH, KC_RSFT,                         KC_UP,             \
     KC_LCTL,KC_LGUI,KC_LALT,                                  KC_SPC,                 KC_RALT,KC_RGUI, KC_APP,KC_RCTL,          KC_LEFT,KC_DOWN,KC_RGHT
-	)
+  )
 };
+

keyboards/xmmx/keymaps/ansi_wkl/keymap.c

@@ -2,12 +2,13 @@
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-	LAYOUT_ansi_wkl(
-	KC_ESC,   KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,                            KC_PSCR, KC_SLCK, KC_PAUS, \
+  LAYOUT_tkl_ansi_wkl(
+    KC_ESC,           KC_F1, KC_F2, KC_F3, KC_F4,     KC_F5, KC_F6, KC_F7, KC_F8,     KC_F9, KC_F10, KC_F11, KC_F12,            KC_PSCR, KC_SLCK, KC_PAUS, \
     KC_GRV,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,KC_MINS, KC_EQL,  KC_BSPC,           KC_INS,KC_HOME, KC_PGUP,   \
     KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,KC_LBRC, KC_RBRC, KC_BSLS,           KC_DEL, KC_END, KC_PGDN,   \
     KC_CAPS,  KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,          KC_ENT,                                    \
     KC_LSFT,          KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH, KC_RSFT,                          KC_UP,            \
     KC_LCTL,        KC_LALT,                                  KC_SPC,                 KC_RALT,      KC_RCTL,                    KC_LEFT,KC_DOWN,KC_RGHT
-	)
+  )
 };
+

keyboards/xmmx/keymaps/default/keymap.c

@@ -2,12 +2,13 @@
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-	LAYOUT_all(
-	KC_ESC,   KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,                            KC_PSCR, KC_SLCK, KC_PAUS, \
+  LAYOUT_all(
+    KC_ESC,           KC_F1, KC_F2, KC_F3, KC_F4,     KC_F5, KC_F6, KC_F7, KC_F8,     KC_F9, KC_F10, KC_F11, KC_F12,            KC_PSCR, KC_SLCK, KC_PAUS, \
     KC_GRV,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC,  KC_INS,KC_HOME, KC_PGUP,   \
     KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,KC_LBRC, KC_RBRC, KC_BSLS,           KC_DEL, KC_END, KC_PGDN,   \
     KC_CAPS,  KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT, KC_NUHS, KC_ENT,         KC_NO,  KC_NO, KC_NO,      \
     KC_LSFT,KC_NUBS,  KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT,        KC_NO,  KC_UP, KC_NO,      \
     KC_LCTL,KC_LGUI,KC_LALT,                                  KC_SPC,                 KC_RALT,KC_RGUI, KC_APP,KC_RCTL,          KC_LEFT,KC_DOWN,KC_RGHT
-	)
+  )
 };
+

keyboards/xmmx/keymaps/iso_wk/keymap.c

@@ -2,12 +2,13 @@
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-	LAYOUT_iso_wk(
-	KC_ESC,   KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,                            KC_PSCR, KC_SLCK, KC_PAUS, \
+  LAYOUT_tkl_iso(
+    KC_ESC,           KC_F1, KC_F2, KC_F3, KC_F4,     KC_F5, KC_F6, KC_F7, KC_F8,     KC_F9, KC_F10, KC_F11, KC_F12,            KC_PSCR, KC_SLCK, KC_PAUS, \
     KC_GRV,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,KC_MINS, KC_EQL,  KC_BSPC,           KC_INS,KC_HOME, KC_PGUP,   \
     KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,KC_LBRC, KC_RBRC,                    KC_DEL, KC_END, KC_PGDN,   \
     KC_CAPS,  KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT, KC_NUHS, KC_ENT,                                    \
     KC_LSFT,  KC_NUBS,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH, KC_RSFT,                         KC_UP,             \
     KC_LCTL,KC_LGUI,KC_LALT,                                  KC_SPC,                 KC_RALT,KC_RGUI, KC_APP,KC_RCTL,          KC_LEFT,KC_DOWN,KC_RGHT
-	)
+  )
 };
+

keyboards/xmmx/keymaps/iso_wkl/keymap.c

@@ -2,12 +2,13 @@
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-	LAYOUT_iso_wkl(
-	KC_ESC,   KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,                            KC_PSCR, KC_SLCK, KC_PAUS, \
+  LAYOUT_tkl_iso_wkl(
+    KC_ESC,           KC_F1, KC_F2, KC_F3, KC_F4,     KC_F5, KC_F6, KC_F7, KC_F8,     KC_F9, KC_F10, KC_F11, KC_F12,            KC_PSCR, KC_SLCK, KC_PAUS, \
     KC_GRV,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,KC_MINS, KC_EQL,  KC_BSPC,           KC_INS,KC_HOME, KC_PGUP,   \
     KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,KC_LBRC, KC_RBRC,                    KC_DEL, KC_END, KC_PGDN,   \
     KC_CAPS,  KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT, KC_NUHS, KC_ENT,                                    \
     KC_LSFT,  KC_NUBS,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH, KC_RSFT,                         KC_UP,             \
     KC_LCTL,        KC_LALT,                                  KC_SPC,                 KC_RALT,                KC_RCTL,          KC_LEFT,KC_DOWN,KC_RGHT
-	)
+  )
 };
+

keyboards/xmmx/readme.md

@@ -1,14 +1,14 @@
 # XMMX
 
-XMMX: Tenkeyless Mechanical Keyboard PCB designed to fit Filco Majestouch TKL and Cooler Master Quickfire Rapid cases
+XMMX is a Tenkeyless Mechanical Keyboard PCB designed to fit Filco Majestouch TKL and Cooler Master Quickfire Rapid cases. 
 
-XMMX schematic and PCB are available opensource under Creative Commons BY-SA 3.0 license on EasyEDA at [this link](https://easyeda.com/farmakon/XMMX-0447d28c1e4644b88fd04905d983684d)
+XMMX schematic and PCB are available opensource under Creative Commons BY-SA 3.0 license on EasyEDA at [this link](https://easyeda.com/farmakon/XMMX-0447d28c1e4644b88fd04905d983684d).
 
-For more informations on the XMMX please visit this [geekhack.org thread](https://geekhack.org/index.php?topic=93422.0)
+For more informations on the XMMX please visit [this geekhack.org thread](https://geekhack.org/index.php?topic=93422.0).
 
-Make examples for these keyboards (after setting up your build environment):
+Make example for this keyboard (after setting up your build environment):
 
     make xmmx:default
 
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/xmmx/xmmx.h

@@ -1,5 +1,4 @@
-#ifndef XMMX
-#define XMMX
+#pragma once
 
 #include "quantum.h"
 
@@ -21,7 +20,7 @@
 }
 
 // 80% keyboard: ANSI Winkey
-#define LAYOUT_ansi_wk( \
+#define LAYOUT_tkl_ansi( \
 	K000,       K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K015, K016, \
 	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, \
 	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, \
@@ -38,7 +37,7 @@
 }
 
 // 80% keyboard: ANSI Winkeyless
-#define LAYOUT_ansi_wkl( \
+#define LAYOUT_tkl_ansi_wkl( \
 	K000,       K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K015, K016, \
 	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, \
 	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, \
@@ -55,7 +54,7 @@
 }
 
 // 80% keyboard: ISO Winkey
-#define LAYOUT_iso_wk( \
+#define LAYOUT_tkl_iso( \
 	K000,       K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K015, K016, \
 	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, \
 	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       K214, K215, K216, \
@@ -72,7 +71,7 @@
 }
 
 // 80% keyboard: ISO Winkeyless
-#define LAYOUT_iso_wkl( \
+#define LAYOUT_tkl_iso_wkl( \
 	K000,       K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K015, K016, \
 	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, \
 	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       K214, K215, K216, \
@@ -88,4 +87,3 @@
 	{ K500, KC_NO,K502, KC_NO,KC_NO,KC_NO,KC_NO,K507, KC_NO,KC_NO,KC_NO,K511, KC_NO,K513, K514, K515, K516 }  \
 }
 
-#endif

quantum/split_common/matrix.c

@@ -32,9 +32,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "timer.h"
 #include "split_flags.h"
 
-#ifdef RGBLIGHT_ENABLE
-#   include "rgblight.h"
-#endif
 #ifdef BACKLIGHT_ENABLE
 #   include "backlight.h"
     extern backlight_config_t backlight_config;
@@ -55,6 +52,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     static bool debouncing = false;
 #endif
 
+#if defined(USE_I2C) || defined(EH)
+
 #if (MATRIX_COLS <= 8)
 #    define print_matrix_header()  print("\nr/c 01234567\n")
 #    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
@@ -62,6 +61,27 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define ROW_SHIFTER ((uint8_t)1)
 #else
 #    error "Currently only supports 8 COLS"
+#endif
+
+#else // USE_SERIAL
+
+#if (MATRIX_COLS <= 8)
+#    define print_matrix_header()  print("\nr/c 01234567\n")
+#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop(matrix[i])
+#    define ROW_SHIFTER ((uint8_t)1)
+#elif (MATRIX_COLS <= 16)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse16(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop16(matrix[i])
+#    define ROW_SHIFTER ((uint16_t)1)
+#elif (MATRIX_COLS <= 32)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse32(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop32(matrix[i])
+#    define ROW_SHIFTER  ((uint32_t)1)
+#endif
+
 #endif
 static matrix_row_t matrix_debouncing[MATRIX_ROWS];
 
@@ -286,24 +306,48 @@ i2c_error: // the cable is disconnceted, or something else went wrong
 
 #else // USE_SERIAL
 
+
+typedef struct _Serial_s2m_buffer_t {
+    // TODO: if MATRIX_COLS > 8 change to uint8_t packed_matrix[] for pack/unpack
+    matrix_row_t smatrix[ROWS_PER_HAND];
+} Serial_s2m_buffer_t;
+
+volatile Serial_s2m_buffer_t serial_s2m_buffer = {};
+volatile Serial_m2s_buffer_t serial_m2s_buffer = {};
+uint8_t volatile status0 = 0;
+
+SSTD_t transactions[] = {
+    { (uint8_t *)&status0,
+      sizeof(serial_m2s_buffer), (uint8_t *)&serial_m2s_buffer,
+      sizeof(serial_s2m_buffer), (uint8_t *)&serial_s2m_buffer
+  }
+};
+
+void serial_master_init(void)
+{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); }
+
+void serial_slave_init(void)
+{ soft_serial_target_init(transactions, TID_LIMIT(transactions)); }
+
 int serial_transaction(void) {
     int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
 
-    if (serial_update_buffers()) {
+    if (soft_serial_transaction()) {
         return 1;
     }
 
+    // TODO:  if MATRIX_COLS > 8 change to unpack()
     for (int i = 0; i < ROWS_PER_HAND; ++i) {
-        matrix[slaveOffset+i] = serial_slave_buffer[i];
+        matrix[slaveOffset+i] = serial_s2m_buffer.smatrix[i];
     }
     
-    #ifdef RGBLIGHT_ENABLE
+    #if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
         // Code to send RGB over serial goes here (not implemented yet)
     #endif
     
     #ifdef BACKLIGHT_ENABLE
         // Write backlight level for slave to read
-        serial_master_buffer[SERIAL_BACKLIT_START] = backlight_config.enable ? backlight_config.level : 0;
+        serial_m2s_buffer.backlight_level = backlight_config.enable ? backlight_config.level : 0;
     #endif
 
     return 0;
@@ -346,8 +390,9 @@ void matrix_slave_scan(void) {
         i2c_slave_buffer[I2C_KEYMAP_START+i] = matrix[offset+i];
     }   
 #else // USE_SERIAL
+    // TODO: if MATRIX_COLS > 8 change to pack()
     for (int i = 0; i < ROWS_PER_HAND; ++i) {
-        serial_slave_buffer[i] = matrix[offset+i];
+        serial_s2m_buffer.smatrix[i] = matrix[offset+i];
     }
 #endif
     matrix_slave_scan_user();

quantum/split_common/matrix.h

@@ -0,0 +1,31 @@
+#ifndef SPLIT_COMMON_MATRIX_H
+#define SPLIT_COMMON_MATRIX_H
+
+#include <common/matrix.h>
+
+#ifdef RGBLIGHT_ENABLE
+#   include "rgblight.h"
+#endif
+
+typedef struct _Serial_m2s_buffer_t {
+#ifdef BACKLIGHT_ENABLE
+    uint8_t backlight_level;
+#endif
+#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
+    rgblight_config_t rgblight_config; //not yet use
+    //
+    // When MCUs on both sides drive their respective RGB LED chains,
+    // it is necessary to synchronize, so it is necessary to communicate RGB information.
+    // In that case, define the RGBLIGHT_SPLIT macro.
+    //
+    // Otherwise, if the master side MCU drives both sides RGB LED chains,
+    // there is no need to communicate.
+#endif
+} Serial_m2s_buffer_t;
+
+extern volatile Serial_m2s_buffer_t serial_m2s_buffer;
+
+void serial_master_init(void);
+void serial_slave_init(void);
+
+#endif

quantum/split_common/serial.c

@@ -1,5 +1,10 @@
 /*
  * WARNING: be careful changing this code, it is very timing dependent
+ *
+ * 2018-10-28 checked
+ *  avr-gcc 4.9.2
+ *  avr-gcc 5.4.0
+ *  avr-gcc 7.3.0
  */
 
 #ifndef F_CPU
@@ -9,17 +14,19 @@
 #include <avr/io.h>
 #include <avr/interrupt.h>
 #include <util/delay.h>
+#include <stddef.h>
 #include <stdbool.h>
 #include "serial.h"
+//#include <pro_micro.h>
 
 #ifdef SOFT_SERIAL_PIN
 
 #ifdef __AVR_ATmega32U4__
   // if using ATmega32U4 I2C, can not use PD0 and PD1 in soft serial.
   #ifdef USE_AVR_I2C
-     #if SOFT_SERIAL_PIN == D0 || SOFT_SERIAL_PIN == D1
-       #error Using ATmega32U4 I2C, so can not use PD0, PD1
-     #endif
+    #if SOFT_SERIAL_PIN == D0 || SOFT_SERIAL_PIN == D1
+      #error Using ATmega32U4 I2C, so can not use PD0, PD1
+    #endif
   #endif
 
   #if SOFT_SERIAL_PIN >= D0 && SOFT_SERIAL_PIN <= D3
@@ -63,215 +70,477 @@
  #error serial.c now support ATmega32U4 only
 #endif
 
-// Serial pulse period in microseconds. Its probably a bad idea to lower this
-// value.
-#define SERIAL_DELAY 24
+#define ALWAYS_INLINE __attribute__((always_inline))
+#define NO_INLINE __attribute__((noinline))
+#define _delay_sub_us(x)    __builtin_avr_delay_cycles(x)
 
-uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
-uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
+// parity check
+#define ODD_PARITY 1
+#define EVEN_PARITY 0
+#define PARITY EVEN_PARITY
 
-#define SLAVE_DATA_CORRUPT (1<<0)
-volatile uint8_t status = 0;
+#ifdef SERIAL_DELAY
+  // custom setup in config.h
+  // #define TID_SEND_ADJUST 2
+  // #define SERIAL_DELAY 6             // micro sec
+  // #define READ_WRITE_START_ADJUST 30 // cycles
+  // #define READ_WRITE_WIDTH_ADJUST 8 // cycles
+#else
+// ============ Standard setups ============
 
+#ifndef SELECT_SOFT_SERIAL_SPEED
+#define SELECT_SOFT_SERIAL_SPEED 1
+//  0: about 189kbps (Experiment only)
+//  1: about 137kbps (default)
+//  2: about 75kbps
+//  3: about 39kbps
+//  4: about 26kbps
+//  5: about 20kbps
+#endif
+
+#if __GNUC__ < 6
+  #define TID_SEND_ADJUST 14
+#else
+  #define TID_SEND_ADJUST 2
+#endif
+
+#if SELECT_SOFT_SERIAL_SPEED == 0
+  // Very High speed
+  #define SERIAL_DELAY 4             // micro sec
+  #if __GNUC__ < 6
+    #define READ_WRITE_START_ADJUST 33 // cycles
+    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
+  #else
+    #define READ_WRITE_START_ADJUST 34 // cycles
+    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
+  #endif
+#elif SELECT_SOFT_SERIAL_SPEED == 1
+  // High speed
+  #define SERIAL_DELAY 6             // micro sec
+  #if __GNUC__ < 6
+    #define READ_WRITE_START_ADJUST 30 // cycles
+    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
+  #else
+    #define READ_WRITE_START_ADJUST 33 // cycles
+    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
+  #endif
+#elif SELECT_SOFT_SERIAL_SPEED == 2
+  // Middle speed
+  #define SERIAL_DELAY 12            // micro sec
+  #define READ_WRITE_START_ADJUST 30 // cycles
+  #if __GNUC__ < 6
+    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
+  #else
+    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
+  #endif
+#elif SELECT_SOFT_SERIAL_SPEED == 3
+  // Low speed
+  #define SERIAL_DELAY 24            // micro sec
+  #define READ_WRITE_START_ADJUST 30 // cycles
+  #if __GNUC__ < 6
+    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
+  #else
+    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
+  #endif
+#elif SELECT_SOFT_SERIAL_SPEED == 4
+  // Very Low speed
+  #define SERIAL_DELAY 36            // micro sec
+  #define READ_WRITE_START_ADJUST 30 // cycles
+  #if __GNUC__ < 6
+    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
+  #else
+    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
+  #endif
+#elif SELECT_SOFT_SERIAL_SPEED == 5
+  // Ultra Low speed
+  #define SERIAL_DELAY 48            // micro sec
+  #define READ_WRITE_START_ADJUST 30 // cycles
+  #if __GNUC__ < 6
+    #define READ_WRITE_WIDTH_ADJUST 3 // cycles
+  #else
+    #define READ_WRITE_WIDTH_ADJUST 7 // cycles
+  #endif
+#else
+#error invalid SELECT_SOFT_SERIAL_SPEED value
+#endif /* SELECT_SOFT_SERIAL_SPEED */
+#endif /* SERIAL_DELAY */
+
+#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2)
+#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2)
+
+#define SLAVE_INT_WIDTH_US 1
+#ifndef SERIAL_USE_MULTI_TRANSACTION
+  #define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY
+#else
+  #define SLAVE_INT_ACK_WIDTH_UNIT 2
+  #define SLAVE_INT_ACK_WIDTH 4
+#endif
+
+static SSTD_t *Transaction_table = NULL;
+static uint8_t Transaction_table_size = 0;
+
+inline static void serial_delay(void) ALWAYS_INLINE;
 inline static
 void serial_delay(void) {
   _delay_us(SERIAL_DELAY);
 }
 
+inline static void serial_delay_half1(void) ALWAYS_INLINE;
+inline static
+void serial_delay_half1(void) {
+  _delay_us(SERIAL_DELAY_HALF1);
+}
+
+inline static void serial_delay_half2(void) ALWAYS_INLINE;
+inline static
+void serial_delay_half2(void) {
+  _delay_us(SERIAL_DELAY_HALF2);
+}
+
+inline static void serial_output(void) ALWAYS_INLINE;
 inline static
 void serial_output(void) {
   SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
 }
 
 // make the serial pin an input with pull-up resistor
+inline static void serial_input_with_pullup(void) ALWAYS_INLINE;
 inline static
-void serial_input(void) {
+void serial_input_with_pullup(void) {
   SERIAL_PIN_DDR  &= ~SERIAL_PIN_MASK;
   SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
 }
 
+inline static uint8_t serial_read_pin(void) ALWAYS_INLINE;
 inline static
 uint8_t serial_read_pin(void) {
   return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
 }
 
+inline static void serial_low(void) ALWAYS_INLINE;
 inline static
 void serial_low(void) {
   SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
 }
 
+inline static void serial_high(void) ALWAYS_INLINE;
 inline static
 void serial_high(void) {
   SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
 }
 
-void serial_master_init(void) {
-  serial_output();
-  serial_high();
+void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size)
+{
+    Transaction_table = sstd_table;
+    Transaction_table_size = (uint8_t)sstd_table_size;
+    serial_output();
+    serial_high();
 }
 
-void serial_slave_init(void) {
-  serial_input();
+void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size)
+{
+    Transaction_table = sstd_table;
+    Transaction_table_size = (uint8_t)sstd_table_size;
+    serial_input_with_pullup();
 
-  // Enable INT0
-  EIMSK |= _BV(INT0);
-  // Trigger on falling edge of INT0
-  EICRA &= ~(_BV(ISC00) | _BV(ISC01));
+    // Enable INT0-INT3,INT6
+    EIMSK |= EIMSK_BIT;
+#if SERIAL_PIN_MASK == _BV(PE6)
+    // Trigger on falling edge of INT6
+    EICRB &= EICRx_BIT;
+#else
+    // Trigger on falling edge of INT0-INT3
+    EICRA &= EICRx_BIT;
+#endif
 }
 
-// Used by the master to synchronize timing with the slave.
+// Used by the sender to synchronize timing with the reciver.
+static void sync_recv(void) NO_INLINE;
 static
 void sync_recv(void) {
-  serial_input();
-  // This shouldn't hang if the slave disconnects because the
-  // serial line will float to high if the slave does disconnect.
+  for (uint8_t i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) {
+  }
+  // This shouldn't hang if the target disconnects because the
+  // serial line will float to high if the target does disconnect.
   while (!serial_read_pin());
-  serial_delay();
 }
 
-// Used by the slave to send a synchronization signal to the master.
+// Used by the reciver to send a synchronization signal to the sender.
+static void sync_send(void) NO_INLINE;
 static
 void sync_send(void) {
-  serial_output();
-
   serial_low();
   serial_delay();
-
   serial_high();
 }
 
 // Reads a byte from the serial line
-static
-uint8_t serial_read_byte(void) {
-  uint8_t byte = 0;
-  serial_input();
-  for ( uint8_t i = 0; i < 8; ++i) {
-    byte = (byte << 1) | serial_read_pin();
-    serial_delay();
-    _delay_us(1);
+static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) NO_INLINE;
+static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) {
+    uint8_t byte, i, p, pb;
+
+  _delay_sub_us(READ_WRITE_START_ADJUST);
+  for( i = 0, byte = 0, p = PARITY; i < bit; i++ ) {
+      serial_delay_half1();   // read the middle of pulses
+      if( serial_read_pin() ) {
+          byte = (byte << 1) | 1; p ^= 1;
+      } else {
+          byte = (byte << 1) | 0; p ^= 0;
+      }
+      _delay_sub_us(READ_WRITE_WIDTH_ADJUST);
+      serial_delay_half2();
   }
+  /* recive parity bit */
+  serial_delay_half1();   // read the middle of pulses
+  pb = serial_read_pin();
+  _delay_sub_us(READ_WRITE_WIDTH_ADJUST);
+  serial_delay_half2();
+
+  *pterrcount += (p != pb)? 1 : 0;
 
   return byte;
 }
 
 // Sends a byte with MSB ordering
-static
-void serial_write_byte(uint8_t data) {
-  uint8_t b = 8;
-  serial_output();
-  while( b-- ) {
-    if(data & (1 << b)) {
-      serial_high();
-    } else {
-      serial_low();
+void serial_write_chunk(uint8_t data, uint8_t bit) NO_INLINE;
+void serial_write_chunk(uint8_t data, uint8_t bit) {
+    uint8_t b, p;
+    for( p = PARITY, b = 1<<(bit-1); b ; b >>= 1) {
+        if(data & b) {
+            serial_high(); p ^= 1;
+        } else {
+            serial_low();  p ^= 0;
+        }
+        serial_delay();
     }
+    /* send parity bit */
+    if(p & 1) { serial_high(); }
+    else      { serial_low(); }
     serial_delay();
+
+    serial_low(); // sync_send() / senc_recv() need raise edge
+}
+
+static void serial_send_packet(uint8_t *buffer, uint8_t size) NO_INLINE;
+static
+void serial_send_packet(uint8_t *buffer, uint8_t size) {
+  for (uint8_t i = 0; i < size; ++i) {
+    uint8_t data;
+    data = buffer[i];
+    sync_send();
+    serial_write_chunk(data,8);
   }
 }
 
-// interrupt handle to be used by the slave device
+static uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) NO_INLINE;
+static
+uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) {
+  uint8_t pecount = 0;
+  for (uint8_t i = 0; i < size; ++i) {
+    uint8_t data;
+    sync_recv();
+    data = serial_read_chunk(&pecount, 8);
+    buffer[i] = data;
+  }
+  return pecount == 0;
+}
+
+inline static
+void change_sender2reciver(void) {
+    sync_send();          //0
+    serial_delay_half1(); //1
+    serial_low();         //2
+    serial_input_with_pullup(); //2
+    serial_delay_half1(); //3
+}
+
+inline static
+void change_reciver2sender(void) {
+    sync_recv();     //0
+    serial_delay();  //1
+    serial_low();    //3
+    serial_output(); //3
+    serial_delay_half1(); //4
+}
+
+static inline uint8_t nibble_bits_count(uint8_t bits)
+{
+    bits = (bits & 0x5) + (bits >> 1 & 0x5);
+    bits = (bits & 0x3) + (bits >> 2 & 0x3);
+    return bits;
+}
+
+// interrupt handle to be used by the target device
 ISR(SERIAL_PIN_INTERRUPT) {
-  sync_send();
 
-  uint8_t checksum = 0;
-  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
-    serial_write_byte(serial_slave_buffer[i]);
-    sync_send();
-    checksum += serial_slave_buffer[i];
+#ifndef SERIAL_USE_MULTI_TRANSACTION
+  serial_low();
+  serial_output();
+  SSTD_t *trans = Transaction_table;
+#else
+  // recive transaction table index
+  uint8_t tid, bits;
+  uint8_t pecount = 0;
+  sync_recv();
+  bits = serial_read_chunk(&pecount,7);
+  tid = bits>>3;
+  bits = (bits&7) != nibble_bits_count(tid);
+  if( bits || pecount> 0 || tid > Transaction_table_size ) {
+      return;
   }
-  serial_write_byte(checksum);
-  sync_send();
+  serial_delay_half1();
 
-  // wait for the sync to finish sending
-  serial_delay();
+  serial_high(); // response step1 low->high
+  serial_output();
+  _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT*SLAVE_INT_ACK_WIDTH);
+  SSTD_t *trans = &Transaction_table[tid];
+  serial_low(); // response step2 ack high->low
+#endif
 
-  // read the middle of pulses
-  _delay_us(SERIAL_DELAY/2);
+  // target send phase
+  if( trans->target2initiator_buffer_size > 0 )
+      serial_send_packet((uint8_t *)trans->target2initiator_buffer,
+                         trans->target2initiator_buffer_size);
+  // target switch to input
+  change_sender2reciver();
 
-  uint8_t checksum_computed = 0;
-  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
-    serial_master_buffer[i] = serial_read_byte();
-    sync_send();
-    checksum_computed += serial_master_buffer[i];
-  }
-  uint8_t checksum_received = serial_read_byte();
-  sync_send();
-
-  serial_input(); // end transaction
-
-  if ( checksum_computed != checksum_received ) {
-    status |= SLAVE_DATA_CORRUPT;
+  // target recive phase
+  if( trans->initiator2target_buffer_size > 0 ) {
+      if (serial_recive_packet((uint8_t *)trans->initiator2target_buffer,
+                               trans->initiator2target_buffer_size) ) {
+          *trans->status = TRANSACTION_ACCEPTED;
+      } else {
+          *trans->status = TRANSACTION_DATA_ERROR;
+      }
   } else {
-    status &= ~SLAVE_DATA_CORRUPT;
+      *trans->status = TRANSACTION_ACCEPTED;
   }
+
+  sync_recv(); //weit initiator output to high
 }
 
-inline
-bool serial_slave_DATA_CORRUPT(void) {
-  return status & SLAVE_DATA_CORRUPT;
-}
-
-// Copies the serial_slave_buffer to the master and sends the
-// serial_master_buffer to the slave.
+/////////
+//  start transaction by initiator
+//
+// int  soft_serial_transaction(int sstd_index)
 //
 // Returns:
-// 0 => no error
-// 1 => slave did not respond
-int serial_update_buffers(void) {
-  // this code is very time dependent, so we need to disable interrupts
+//    TRANSACTION_END
+//    TRANSACTION_NO_RESPONSE
+//    TRANSACTION_DATA_ERROR
+// this code is very time dependent, so we need to disable interrupts
+#ifndef SERIAL_USE_MULTI_TRANSACTION
+int  soft_serial_transaction(void) {
+  SSTD_t *trans = Transaction_table;
+#else
+int  soft_serial_transaction(int sstd_index) {
+  if( sstd_index > Transaction_table_size )
+      return TRANSACTION_TYPE_ERROR;
+  SSTD_t *trans = &Transaction_table[sstd_index];
+#endif
   cli();
 
-  // signal to the slave that we want to start a transaction
+  // signal to the target that we want to start a transaction
   serial_output();
   serial_low();
-  _delay_us(1);
+  _delay_us(SLAVE_INT_WIDTH_US);
 
-  // wait for the slaves response
-  serial_input();
-  serial_high();
-  _delay_us(SERIAL_DELAY);
+#ifndef SERIAL_USE_MULTI_TRANSACTION
+  // wait for the target response
+  serial_input_with_pullup();
+  _delay_us(SLAVE_INT_RESPONSE_TIME);
 
-  // check if the slave is present
+  // check if the target is present
   if (serial_read_pin()) {
-    // slave failed to pull the line low, assume not present
+    // target failed to pull the line low, assume not present
+    serial_output();
+    serial_high();
+    *trans->status = TRANSACTION_NO_RESPONSE;
     sei();
-    return 1;
+    return TRANSACTION_NO_RESPONSE;
   }
 
-  // if the slave is present syncronize with it
-  sync_recv();
+#else
+  // send transaction table index
+  int tid = (sstd_index<<3) | (7 & nibble_bits_count(sstd_index));
+  sync_send();
+  _delay_sub_us(TID_SEND_ADJUST);
+  serial_write_chunk(tid, 7);
+  serial_delay_half1();
 
-  uint8_t checksum_computed = 0;
-  // receive data from the slave
-  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
-    serial_slave_buffer[i] = serial_read_byte();
-    sync_recv();
-    checksum_computed += serial_slave_buffer[i];
-  }
-  uint8_t checksum_received = serial_read_byte();
-  sync_recv();
-
-  if (checksum_computed != checksum_received) {
-    sei();
-    return 1;
+  // wait for the target response (step1 low->high)
+  serial_input_with_pullup();
+  while( !serial_read_pin() ) {
+      _delay_sub_us(2);
   }
 
-  uint8_t checksum = 0;
-  // send data to the slave
-  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
-    serial_write_byte(serial_master_buffer[i]);
-    sync_recv();
-    checksum += serial_master_buffer[i];
+  // check if the target is present (step2 high->low)
+  for( int i = 0; serial_read_pin(); i++ ) {
+      if (i > SLAVE_INT_ACK_WIDTH + 1) {
+          // slave failed to pull the line low, assume not present
+          serial_output();
+          serial_high();
+          *trans->status = TRANSACTION_NO_RESPONSE;
+          sei();
+          return TRANSACTION_NO_RESPONSE;
+      }
+      _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT);
+  }
+#endif
+
+  // initiator recive phase
+  // if the target is present syncronize with it
+  if( trans->target2initiator_buffer_size > 0 ) {
+      if (!serial_recive_packet((uint8_t *)trans->target2initiator_buffer,
+                                trans->target2initiator_buffer_size) ) {
+          serial_output();
+          serial_high();
+          *trans->status = TRANSACTION_DATA_ERROR;
+          sei();
+          return TRANSACTION_DATA_ERROR;
+      }
+   }
+
+  // initiator switch to output
+  change_reciver2sender();
+
+  // initiator send phase
+  if( trans->initiator2target_buffer_size > 0 ) {
+      serial_send_packet((uint8_t *)trans->initiator2target_buffer,
+                         trans->initiator2target_buffer_size);
   }
-  serial_write_byte(checksum);
-  sync_recv();
 
   // always, release the line when not in use
-  serial_output();
-  serial_high();
+  sync_send();
 
+  *trans->status = TRANSACTION_END;
   sei();
-  return 0;
+  return TRANSACTION_END;
 }
 
-#endif /* SOFT_SERIAL_PIN */
+#ifdef SERIAL_USE_MULTI_TRANSACTION
+int soft_serial_get_and_clean_status(int sstd_index) {
+    SSTD_t *trans = &Transaction_table[sstd_index];
+    cli();
+    int retval = *trans->status;
+    *trans->status = 0;;
+    sei();
+    return retval;
+}
+#endif
+
+#endif
+
+// Helix serial.c history
+//   2018-1-29 fork from let's split and add PD2, modify sync_recv() (#2308, bceffdefc)
+//   2018-6-28 bug fix master to slave comm and speed up (#3255, 1038bbef4)
+//             (adjusted with avr-gcc 4.9.2)
+//   2018-7-13 remove USE_SERIAL_PD2 macro (#3374, f30d6dd78)
+//             (adjusted with avr-gcc 4.9.2)
+//   2018-8-11 add support multi-type transaction (#3608, feb5e4aae)
+//             (adjusted with avr-gcc 4.9.2)
+//   2018-10-21 fix serial and RGB animation conflict (#4191, 4665e4fff)
+//             (adjusted with avr-gcc 7.3.0)
+//   2018-10-28 re-adjust compiler depend value of delay (#4269, 8517f8a66)
+//             (adjusted with avr-gcc 5.4.0, 7.3.0)
+//   2018-12-17 copy to TOP/quantum/split_common/ and remove backward compatibility code (#4669)

quantum/split_common/serial.h

@@ -1,5 +1,5 @@
-#ifndef MY_SERIAL_H
-#define MY_SERIAL_H
+#ifndef SOFT_SERIAL_H
+#define SOFT_SERIAL_H
 
 #include <stdbool.h>
 
@@ -7,20 +7,59 @@
 // Need Soft Serial defines in config.h
 // /////////////////////////////////////////////////////////////////
 // ex.
-//  /* Configuration of lower interface with the lower layer(hardware) of serial.c */
 //  #define SOFT_SERIAL_PIN ??   // ?? = D0,D1,D2,D3,E6
+//  OPTIONAL: #define SELECT_SOFT_SERIAL_SPEED ? // ? = 1,2,3,4,5
+//                                               //  1: about 137kbps (default)
+//                                               //  2: about 75kbps
+//                                               //  3: about 39kbps
+//                                               //  4: about 26kbps
+//                                               //  5: about 20kbps
 //
-//  /* Configuration of upper interface with the upper layer of serial.c */
-//  #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
-//  #define SERIAL_MASTER_BUFFER_LENGTH 1
+// //// USE simple API (using signle-type transaction function)
+//   /* nothing */
+// //// USE flexible API (using multi-type transaction function)
+//   #define SERIAL_USE_MULTI_TRANSACTION
+//
+// /////////////////////////////////////////////////////////////////
 
-// Buffers for master - slave communication
-extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
-extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
+// Soft Serial Transaction Descriptor
+typedef struct _SSTD_t  {
+    uint8_t *status;
+    uint8_t initiator2target_buffer_size;
+    uint8_t *initiator2target_buffer;
+    uint8_t target2initiator_buffer_size;
+    uint8_t *target2initiator_buffer;
+} SSTD_t;
+#define TID_LIMIT( table ) (sizeof(table) / sizeof(SSTD_t))
 
-void serial_master_init(void);
-void serial_slave_init(void);
-int serial_update_buffers(void);
-bool serial_slave_data_corrupt(void);
+// initiator is transaction start side
+void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size);
+// target is interrupt accept side
+void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size);
 
+// initiator resullt
+#define TRANSACTION_END 0
+#define TRANSACTION_NO_RESPONSE 0x1
+#define TRANSACTION_DATA_ERROR  0x2
+#define TRANSACTION_TYPE_ERROR  0x4
+#ifndef SERIAL_USE_MULTI_TRANSACTION
+int  soft_serial_transaction(void);
+#else
+int  soft_serial_transaction(int sstd_index);
 #endif
+
+// target status
+// *SSTD_t.status has
+//   initiator:
+//       TRANSACTION_END
+//    or TRANSACTION_NO_RESPONSE
+//    or TRANSACTION_DATA_ERROR
+//   target:
+//       TRANSACTION_DATA_ERROR
+//    or TRANSACTION_ACCEPTED
+#define TRANSACTION_ACCEPTED 0x8
+#ifdef SERIAL_USE_MULTI_TRANSACTION
+int  soft_serial_get_and_clean_status(int sstd_index);
+#endif
+
+#endif /* SOFT_SERIAL_H */

quantum/split_common/serial_backward_compatibility.h

@@ -1,11 +0,0 @@
-/* serial.h backward compatibility */
-
-// #ifndef SOFT_SERIAL_PIN
-//  #define SOFT_SERIAL_PIN D0
-// #endif
-
-#ifndef SERIAL_SLAVE_BUFFER_LENGTH
- #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
- #define SERIAL_MASTER_BUFFER_LENGTH 1
-#endif
-

quantum/split_common/split_util.c

@@ -11,9 +11,6 @@
 #include "timer.h"
 #include "split_flags.h"
 
-#ifdef RGBLIGHT_ENABLE
-#   include "rgblight.h"
-#endif
 #ifdef BACKLIGHT_ENABLE
 #   include "backlight.h"
 #endif
@@ -24,8 +21,6 @@
 
 #if defined(USE_I2C) || defined(EH)
 #  include "i2c.h"
-#else
-#  include "serial.h"
 #endif
 
 volatile bool isLeftHand = true;
@@ -112,7 +107,7 @@ void keyboard_slave_loop(void) {
                 BACKLIT_DIRTY = false;
             }
         #else // USE_SERIAL
-            backlight_set(serial_master_buffer[SERIAL_BACKLIT_START]);
+            backlight_set(serial_m2s_buffer.backlight_level);
         #endif
     #endif
     // Read RGB Info
@@ -137,7 +132,9 @@ void keyboard_slave_loop(void) {
                 sei();
             }
         #else // USE_SERIAL
+          #ifdef RGBLIGHT_SPLIT
             // Add serial implementation for RGB here
+          #endif
         #endif
     #endif
    }

quantum/split_common/split_util.h

@@ -7,9 +7,6 @@
 #include <stdlib.h>
 #include "eeconfig.h"
 
-// backlight level store index in serial_master_buffer[] for slave to read
-#define SERIAL_BACKLIT_START   0x00
-
 #define SLAVE_I2C_ADDRESS           0x32
 
 extern volatile bool isLeftHand;

shell.nix

@@ -4,6 +4,10 @@
 
 with pkgs;
 let
+  avrbinutils = pkgsCross.avr.buildPackages.binutils;
+  avrlibc = pkgsCross.avr.libcCross;
+  gcc-arm-embedded = pkgsCross.arm-embedded.buildPackages.gcc;
+
   avr_incflags = [
     "-isystem ${avrlibc}/avr/include"
     "-B${avrlibc}/avr/lib/avr5"
@@ -13,7 +17,7 @@ let
     "-B${avrlibc}/avr/lib/avr51"
     "-L${avrlibc}/avr/lib/avr51"
   ];
-  avrgcc = pkgs.avrgcc.overrideAttrs (oldAttrs: rec {
+  avrgcc = pkgsCross.avr.buildPackages.gcc.overrideAttrs (oldAttrs: rec {
     name = "avr-gcc-8.1.0";
     src = fetchurl {
       url = "mirror://gcc/releases/gcc-8.1.0/gcc-8.1.0.tar.xz";

tmk_core/common/action.c

@@ -898,10 +898,19 @@ void clear_keyboard(void)
  * FIXME: Needs documentation.
  */
 void clear_keyboard_but_mods(void)
+{
+    clear_keys();
+    clear_keyboard_but_mods_and_keys();
+}
+
+/** \brief Utilities for actions. (FIXME: Needs better description)
+ *
+ * FIXME: Needs documentation.
+ */
+void clear_keyboard_but_mods_and_keys()
 {
     clear_weak_mods();
     clear_macro_mods();
-    clear_keys();
     send_keyboard_report();
 #ifdef MOUSEKEY_ENABLE
     mousekey_clear();

tmk_core/common/action.h

@@ -94,6 +94,7 @@ void unregister_mods(uint8_t mods);
 //void set_mods(uint8_t mods);
 void clear_keyboard(void);
 void clear_keyboard_but_mods(void);
+void clear_keyboard_but_mods_and_keys(void);
 void layer_switch(uint8_t new_layer);
 bool is_tap_key(keypos_t key);
 

tmk_core/common/action_layer.c

@@ -44,7 +44,11 @@ static void default_layer_state_set(uint32_t state)
     default_layer_debug(); debug(" to ");
     default_layer_state = state;
     default_layer_debug(); debug("\n");
+#ifdef STRICT_LAYER_RELEASE
     clear_keyboard_but_mods(); // To avoid stuck keys
+#else
+    clear_keyboard_but_mods_and_keys(); // Don't reset held keys
+#endif
 }
 
 /** \brief Default Layer Print
@@ -127,7 +131,11 @@ void layer_state_set(uint32_t state)
     layer_debug(); dprint(" to ");
     layer_state = state;
     layer_debug(); dprintln();
+#ifdef STRICT_LAYER_RELEASE
     clear_keyboard_but_mods(); // To avoid stuck keys
+#else
+    clear_keyboard_but_mods_and_keys(); // Don't reset held keys
+#endif
 }
 
 /** \brief Layer clear

users/ishtob/ishtob.h

@@ -85,7 +85,6 @@ expanded before being used as arguments to the LAYOUT_xxx macro.
 #define KEYMAP_wrapper(...)                  LAYOUT(__VA_ARGS__)
 #define LAYOUT_wrapper(...)                  LAYOUT(__VA_ARGS__)
 #define LAYOUT_ortho_4x12_wrapper(...)       LAYOUT_ortho_4x12(__VA_ARGS__)
-#define LAYOUT_planck_grid(...)              LAYOUT_planck_grid(__VA_ARGS__)
 
 /*
 Blocks for each of the four major keyboard layouts

util/linux_install.sh

@@ -32,7 +32,7 @@ if grep ID /etc/os-release | grep -qE "fedora"; then
 elif grep ID /etc/os-release | grep -qE 'debian|ubuntu'; then
 	DEBIAN_FRONTEND=noninteractive
 	DEBCONF_NONINTERACTIVE_SEEN=true
-        export DEBIAN_FRONTEND DEBCONF_NONINTERACTIVE_SEEN
+	export DEBIAN_FRONTEND DEBCONF_NONINTERACTIVE_SEEN
 	sudo apt-get update
 	sudo apt-get install \
 		build-essential \
@@ -70,20 +70,18 @@ elif grep ID /etc/os-release | grep -q 'arch\|manjaro'; then
 		wget \
 		zip
 	git clone https://aur.archlinux.org/dfu-programmer.git /tmp/dfu-programmer
-	cd /tmp/dfu-programmer
+	cd /tmp/dfu-programmer || exit 1
 	makepkg -sic
 	rm -rf /tmp/dfu-programmer/
 
 elif grep ID /etc/os-release | grep -q gentoo; then
-	echo GENTOO_WARNING | fmt
-	echo -n "Proceed (y/N)? "
-	old_stty_cfg=$(stty -g)
-	stty raw -echo
-	answer=$( while ! head -c 1 | grep -i '[ny]' ;do true ;done )
-	stty $old_stty_cfg
-	if echo "$answer" | grep -iq "^y" ;then
+	echo "$GENTOO_WARNING" | fmt
+	printf "\nProceed (y/N)? "
+	read -r answer
+	if echo "$answer" | grep -iq "^y"; then
 		sudo touch /etc/portage/package.use/qmkfirmware
-		echo "sys-devel/gcc multilib" | sudo tee --append /etc/portage/package.use/qmkfirmware > /dev/null
+		# tee is used here since sudo doesn't apply to >>
+		echo "sys-devel/gcc multilib" | sudo tee --append /etc/portage/package.use/qmkfirmware >/dev/null
 		sudo emerge -auN \
 			app-arch/unzip \
 			app-arch/zip \

util/travis_compiled_push.sh

@@ -8,6 +8,7 @@ TRAVIS_COMMIT_RANGE="${TRAVIS_COMMIT_RANGE:-HEAD~1..HEAD}"
 set -o errexit -o nounset
 
 rev=$(git rev-parse --short HEAD)
+echo "Using git hash ${rev}"
 
 if [[ "$TRAVIS_BRANCH" == "master" && "$TRAVIS_PULL_REQUEST" == "false" ]] ; then
 
@@ -34,7 +35,7 @@ increment_version ()
   part[2]=$((part[2] + 1))
   new="${part[*]}"
   echo -e "${new// /.}"
-} 
+}
 
 git diff --name-only -n 1 ${TRAVIS_COMMIT_RANGE}
 
@@ -63,7 +64,7 @@ if [[ "$TRAVIS_COMMIT_MESSAGE" != *"[skip build]"* ]] ; then
 	ssh-add -D
 	eval `ssh-agent -s`
 	ssh-add id_rsa_qmk.fm
-	
+
 	# don't delete files in case not all keyboards are built
 	# rm -f compiled/*.hex
 
@@ -74,7 +75,7 @@ if [[ "$TRAVIS_COMMIT_MESSAGE" != *"[skip build]"* ]] ; then
 	for file in ../qmk_firmware/keyboards/*/*/*/*/keymaps/*/*_default.hex; do mv -v "$file" "compiled/${file##*/}" || true; done
 	bash _util/generate_keyboard_page.sh
 	git add -A
-	git commit -m "generated from qmk/qmk_firmware@${rev}" 
+	git commit -m "generated from qmk/qmk_firmware@${rev}"
 	git push git@github.com:qmk/qmk.fm.git
 
 fi