Update build instructions and Dockerfile to download submodules

* Initial commit of RAMA KOYU

* Changed default layout

* removed IS_COMMAND()

Dockerfile

@@ -26,4 +26,4 @@ VOLUME /qmk_firmware
 WORKDIR /qmk_firmware
 COPY . .
 
-CMD make $KEYBOARD:$KEYMAP
+CMD make clean ; make git-submodule ; make $KEYBOARD:$KEYMAP

docs/faq_build.md

@@ -36,6 +36,12 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff0", MODE:="066
 # tmk keyboard products     https://github.com/tmk/tmk_keyboard
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666"
 ```
+**/etc/udev/rules.d/54-input-club-keyboard.rules:**
+
+```
+# Input Club keyboard bootloader
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1c11", MODE:="0666"
+```
 
 ### Serial device is not detected in bootloader mode on Linux
 Make sure your kernel has appropriate support for your device. If your device uses USB ACM, such as

docs/feature_rgblight.md

@@ -125,6 +125,8 @@ The following options can be used to tweak the various animations:
 
 You can also modify the speeds that the different modes animate at:
 
+Here is a quick demo on Youtube (with NPKC KC60) (https://www.youtube.com/watch?v=VKrpPAHlisY).
+
 ```c
 // How long (in milliseconds) to wait between animation steps for each of the "Solid color breathing" animations
 const uint8_t RGBLED_BREATHING_INTERVALS[] PROGMEM = {30, 20, 10, 5};

docs/getting_started_build_tools.md

@@ -2,6 +2,8 @@
 
 This page describes setting up the build environment for QMK. These instructions cover AVR processors (such as the atmega32u4).
 
+After cloning the repo of QMK run `make git-submodule` once to download 3rd party libraries like ChibiOS.
+
 <!-- FIXME: We should have ARM instructions somewhere. -->
 
 Note: If it is your first time here, Check out the "Complete Newbs guide" instead

keyboards/atomic/readme.md

@@ -3,7 +3,7 @@ Atomic
 
 ![Atomic](http://i.imgur.com/3gNDJAh.jpg)
 
-A compact 60% (15x5) ortholinear keyboard kit made and sold by OLKB. [More info on qmk.fm](http://qmk.fm/atomic/)
+A compact 60% (15x5) ortholinear keyboard kit made and sold by OLKB.
 
 Keyboard Maintainer: [Jack Humbert](https://github.com/jackhumbert)  
 Hardware Supported: Atomic PCB rev1, Teensy 2.0  

keyboards/c39/c39.c

@@ -0,0 +1 @@
+#include "c39.h"

keyboards/c39/c39.h

@@ -0,0 +1,17 @@
+#pragma once
+
+#include "quantum.h"
+
+#define ___ KC_NO
+
+#define LAYOUT( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C  \
+  ) { \
+  { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C }, \
+  { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C }, \
+  { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C }  \
+}
+
+#define LAYOUT_ortho_3x13 LAYOUT

keyboards/c39/config.h

@@ -0,0 +1,89 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xCA17
+#define PRODUCT_ID      0xCA39
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Maple Computing
+#define PRODUCT         C39
+#define DESCRIPTION     A compact 39 key keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 3
+#define MATRIX_COLS 13
+
+#define MATRIX_ROW_PINS { D1, B4, B5 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, D7, E6, C6, D2, D3 }
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION

keyboards/c39/info.json

@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "C39", 
+    "url": "", 
+    "maintainer": "Space Cat", 
+    "width": 13.25, 
+    "height": 3, 
+    "layouts": {
+        "LAYOUT": {
+            "layout": [{"label":"Q", "x":0, "y":0}, {"label":"W", "x":1, "y":0}, {"label":"E", "x":2, "y":0}, {"label":"R", "x":3, "y":0}, {"label":"T", "x":4, "y":0}, {"label":"Back", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"M1", "x":11.25, "y":0}, {"label":"M2", "x":12.25, "y":0}, {"label":"A", "x":0, "y":1}, {"label":"S", "x":1, "y":1}, {"label":"D", "x":2, "y":1}, {"label":"F", "x":3, "y":1}, {"label":"G", "x":4, "y":1}, {"label":"Enter", "x":5, "y":1}, {"label":"H", "x":6, "y":1}, {"label":"J", "x":7, "y":1}, {"label":"K", "x":8, "y":1}, {"label":"L", "x":9, "y":1}, {"label":";", "x":10, "y":1}, {"label":"M3", "x":11.25, "y":1}, {"label":"M4", "x":12.25, "y":1}, {"label":"Z", "x":0, "y":2}, {"label":"X", "x":1, "y":2}, {"label":"C", "x":2, "y":2}, {"label":"V", "x":3, "y":2}, {"label":"B", "x":4, "y":2}, {"label":"Fn", "x":5, "y":2}, {"label":"N", "x":6, "y":2}, {"label":"M", "x":7, "y":2}, {"label":"<", "x":8, "y":2}, {"label":">", "x":9, "y":2}, {"label":"?", "x":10, "y":2}, {"label":"M5", "x":11.25, "y":2}, {"label":"M6", "x":12.25, "y":2}]
+        }
+    }
+}

keyboards/c39/keymaps/default/config.h

@@ -0,0 +1,3 @@
+#pragma once
+
+// place overrides here

keyboards/c39/keymaps/default/keymap.c

@@ -0,0 +1,45 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _FN1 1
+
+// Defines for task manager and such
+#define CALTDEL LCTL(LALT(KC_DEL))
+#define TSKMGR LCTL(LSFT(KC_ESC))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,----------------------------------------------------------------------------.  ,-------------.
+ * |   Q  |   W  |   E  |   R  |   T  | Bksp |   Y  |   U  |   I  |   O  |   P  |  |  M1  |  M2  |
+ * |------+------+------+------+------+------+------+------+------+------+------+  |------+------|
+ * |   A  |   S  |   D  |   F  |   G  | Enter|   H  |   J  |   K  |   L  |   ;  |  |  M3  |  M4  |
+ * |------+------+------+------+------+------+------+------+------+------+------+  |------+------|
+ * |   Z  |   X  |   C  |   V  |   B  |  FN1 |   N  |   M  |   ,  |   .  |   /  |  |  M5  |  M6  |
+ * `----------------------------------------------------------------------------'  `-------------'
+ */
+[_QWERTY] = LAYOUT(
+    KC_Q, KC_W, KC_E, KC_R, KC_T, KC_BSPC,                KC_Y, KC_U, KC_I,    KC_O,   KC_P,      KC_1, KC_2,
+    KC_A, KC_S, KC_D, KC_F, KC_G, MT(MOD_LSFT, KC_ENT),   KC_H, KC_J, KC_K,    KC_L,   KC_SCLN,   KC_3, KC_4,
+    KC_Z, KC_X, KC_C, KC_V, KC_B, LT(_FN1, KC_SPC),       KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,   KC_5, KC_6
+),
+
+/* FN1
+ * ,----------------------------------------------------------------------------.  ,-------------.
+ * |   1  |   2  |   3  |   4  |   5  | Bksp |   6  |   7  |   8  |   9  |   0  |  |  M1  |  M2  |
+ * |------+------+------+------+------+------+------+------+------+------+------+  |------+------|
+ * |   4  |   5  |   6  |   +  |      | Enter|      |      |      |      |      |  |  M3  |  M4  |
+ * |------+------+------+------+------+------+------+------+------+------+------+  |------+------|
+ * |   7  |   8  |   9  |   0  |      |  FN1 |      |      |      |      |      |  |  M5  |  M6  |
+ * `----------------------------------------------------------------------------'  `-------------'
+ */
+[_FN1] = LAYOUT(
+    KC_1, KC_2, KC_3, KC_4,    KC_5,    KC_BSPC, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,      KC_1, KC_2,
+    KC_4, KC_5, KC_6, KC_PLUS, _______, KC_ENT,  _______, _______, _______, _______, _______,   KC_3, KC_4,
+    KC_7, KC_8, KC_9, KC_0,    _______, _______, _______, _______, _______, _______, _______,   KC_5, KC_6
+),
+};

keyboards/c39/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for the C39

keyboards/c39/readme.md

@@ -0,0 +1,16 @@
+# C39
+=======
+
+![C39](https://i.imgur.com/KuWIIuW.png)
+
+A compact 39 key keyboard.
+
+Keyboard Maintainer: [Maple Computing]()  
+Hardware Supported: C39 PCB  
+Hardware Availability: [SpaceCat.design](https://spacecat.design)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make c39:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/c39/rules.mk

@@ -0,0 +1,66 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+RGBLIGHT_ENABLE = no        # RGB Enable / Disable

keyboards/contra/keymaps/msiu/config.h

@@ -0,0 +1,37 @@
+#pragma once
+
+#ifdef AUDIO_ENABLE
+    #define STARTUP_SONG SONG(PLANCK_SOUND)
+    // #define STARTUP_SONG SONG(NO_SOUND)
+
+    #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \
+                                  SONG(COLEMAK_SOUND), \
+                                  SONG(DVORAK_SOUND) \
+                                }
+#endif
+
+#define MUSIC_MASK (keycode != KC_NO)
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+                                
+#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 2

keyboards/contra/keymaps/msiu/keymap.c

@@ -0,0 +1,175 @@
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+enum planck_layers {
+  _QWERTY,
+  _DVORAK,
+  _LOWER,
+  _RAISE,
+  _NUMB,
+  _FUNC,
+  _ADJUST
+};
+
+enum planck_keycodes {
+  QWERTY = SAFE_RANGE,
+  DVORAK,
+  LOWER,
+  RAISE
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  /* Qwerty
+   * ,------------------------------------------------------------------------------------------.
+   * | Tab / Numb  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+   * |-------------+------+------+------+------+-------------+------+------+------+------+------|
+   * | Esc / Ctrl  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  '   |
+   * |-------------+------+------+------+------+------|------+------+------+------+------+------|
+   * | Shift       |   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+   * |-------------+------+------+------+------+------+------+------+------+------+------+------|
+   * | Ctrl        |Hyper | Alt  | GUI  |Lower | Func |Space |Raise | Left | Down |  Up  |Right |
+   * `------------------------------------------------------------------------------------------'
+   */
+  [_QWERTY] = LAYOUT_ortho_4x12(
+    LT(_NUMB, KC_TAB),   KC_Q,    KC_W,    KC_E,    KC_R,  KC_T,      KC_Y,   KC_U,  KC_I,    KC_O,    KC_P,    KC_BSPC,
+    LCTL_T(KC_ESC),      KC_A,    KC_S,    KC_D,    KC_F,  KC_G,      KC_H,   KC_J,  KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+    KC_LSFT,             KC_Z,    KC_X,    KC_C,    KC_V,  KC_B,      KC_N,   KC_M,  KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,
+    KC_LCTL,             KC_HYPR, KC_LALT, KC_LGUI, LOWER, MO(_FUNC), KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+  ),
+
+  /* Dvorak
+   * ,-----------------------------------------------------------------------------------.
+   * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
+   * |------+------+------+------+------+-------------+------+------+------+------+------|
+   * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
+   * |------+------+------+------+------+------|------+------+------+------+------+------|
+   * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
+   * |------+------+------+------+------+------+------+------+------+------+------+------|
+   * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+   * `-----------------------------------------------------------------------------------'
+   */
+  [_DVORAK] = LAYOUT_ortho_4x12(
+    _______, KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,     KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    _______,
+    _______, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,     KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH,
+    _______, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,     KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    _______,
+    _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+  ),
+
+  /* Lower
+   * ,-----------------------------------------------------------------------------------.
+   * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+   * |------+------+------+------+------+-------------+------+------+------+------+------|
+   * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
+   * |------+------+------+------+------+------|------+------+------+------+------+------|
+   * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | | Home | End  |      |
+   * |------+------+------+------+------+------+------+------+------+------+------+------|
+   * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+   * `-----------------------------------------------------------------------------------'
+   */
+  [_LOWER] = LAYOUT_ortho_4x12(
+    KC_TILD, KC_EXLM,  KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,
+    _______, KC_F1,    KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
+    _______, KC_F7,    KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PGDN, KC_PGUP, KC_HOME, KC_END , KC_MUTE,
+    _______, _______,  _______, _______, _______, _______, KC_MPLY, _______, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT
+  ),
+
+  /* Raise
+   * ,-----------------------------------------------------------------------------------.
+   * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+   * |------+------+------+------+------+-------------+------+------+------+------+------|
+   * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+   * |------+------+------+------+------+------|------+------+------+------+------+------|
+   * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |Pg Up |Pg Dn |      |
+   * |------+------+------+------+------+------+------+------+------+------+------+------|
+   * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+   * `-----------------------------------------------------------------------------------'
+   */
+  [_RAISE] = LAYOUT_ortho_4x12(
+    KC_GRV,  KC_1,    KC_2,    KC_3,   KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+    _______, KC_4,    KC_5,    KC_6,   KC_PLUS, KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+    _______, KC_7,    KC_8,    KC_9,   KC_MINS, KC_F11,  KC_F12,  KC_PGDN, KC_PGUP, KC_HOME, KC_END , KC_MUTE,
+    _______, _______, _______, _______, _______, _______, KC_MPLY, _______, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT
+  ),
+
+  /* Adjust (Lower + Raise)
+   * ,-----------------------------------------------------------------------------------.
+   * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+   * |------+------+------+------+------+-------------+------+------+------+------+------|
+   * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover|      |
+   * |------+------+------+------+------+------|------+------+------+------+------+------|
+   * |      |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|      |      |      |      |      |
+   * |------+------+------+------+------+------+------+------+------+------+------+------|
+   * |      |      |      |      |      |             |      |      |      |      |      |
+   * `-----------------------------------------------------------------------------------'
+   */
+  [_ADJUST] = LAYOUT_ortho_4x12(
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, QWERTY,  DVORAK,  _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET
+  ),
+
+  [_FUNC] = LAYOUT_ortho_4x12(
+    _______, _______, _______, _______, _______, _______, _______, _______, KC_UP,   _______, KC_PSCR, _______,
+    _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+  ),
+
+  [_NUMB] = LAYOUT_ortho_4x12(
+    _______, _______, _______, _______, _______, _______, _______, KC_7,    KC_8,    KC_9,    _______, KC_BSPC,
+    _______, _______, _______, _______, _______, _______, _______, KC_4,    KC_5,    KC_6,    _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, KC_1,    KC_2,    KC_3,    _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, KC_0,    KC_0,    _______, _______, _______
+  )
+
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        // print("mode just switched to qwerty and this is a huge string\n");
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_DVORAK);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}

keyboards/contra/keymaps/msiu/readme.md

@@ -0,0 +1,2 @@
+# The Default Contra Layout
+

keyboards/ergotaco/config.h

@@ -0,0 +1,61 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+// Copy and worked on with love from the EZ team
+
+#pragma once
+#include "config_common.h"
+
+#define VERBOSE
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x1337
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    g Heavy Industries 
+#define PRODUCT         ErgoTaco
+#define DESCRIPTION     QMK keyboard firmware for ErgoTaco
+
+/* key matrix size */
+#define MATRIX_ROWS 12
+#define MATRIX_ROWS_PER_SIDE (MATRIX_ROWS / 2)
+#define MATRIX_COLS 1
+
+#define MOUSEKEY_INTERVAL       20
+#define MOUSEKEY_DELAY          0
+#define MOUSEKEY_TIME_TO_MAX    60
+#define MOUSEKEY_MAX_SPEED      7
+#define MOUSEKEY_WHEEL_DELAY 0
+#define TAPPING_TOGGLE  1
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+#define TAPPING_TERM    200
+#define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.)
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() (get_mods() == MOD_MASK_CTRL || get_mods() == MOD_MASK_SHIFT)
+
+#define DEBOUNCE    5
+#define USB_MAX_POWER_CONSUMPTION 500

keyboards/ergotaco/ergotaco.c

@@ -0,0 +1,72 @@
+#include QMK_KEYBOARD_H
+
+bool i2c_initialized = 0;
+i2c_status_t mcp23018_status = 0x20;
+
+void matrix_init_kb(void) {
+    // (tied to Vcc for hardware convenience)
+    //DDRB  &= ~(1<<4);  // set B(4) as input
+    //PORTB &= ~(1<<4);  // set B(4) internal pull-up disabled
+
+    // unused pins
+    // set as input with internal pull-up enabled
+    DDRB  &= ~(1<<4 | 1<<5 | 1<<6 | 1<<7);
+    PORTB |=  (1<<4 | 1<<5 | 1<<6 | 1<<7);
+
+    DDRC  &= ~(1<<7 | 1<<6);
+    PORTC |=  (1<<7 | 1<<6);
+
+    DDRD  &= ~(1<<4 | 1<<5 | 1<<6 | 1<<7);
+    PORTD |=  (1<<4 | 1<<5 | 1<<6 | 1<<7);
+
+    DDRE  &= ~(1<<6);
+    PORTE |=  (1<<6);
+
+    DDRF  &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6 | 1<<7);
+    PORTF |=  (1<<0 | 1<<1 | 1<<4 | 1<<6 | 1<<7);
+
+    matrix_init_user();
+}
+
+
+uint8_t init_mcp23018(void) {
+    print("starting init");
+    mcp23018_status = 0x20;
+
+    // I2C subsystem
+
+    // uint8_t sreg_prev;
+    // sreg_prev=SREG;
+    // cli();
+
+    if (i2c_initialized == 0) {
+        i2c_init();  // on pins D(1,0)
+        i2c_initialized = true;
+        _delay_ms(1000);
+    }
+
+    // set pin direction
+    // - unused  : input  : 1
+    // - input   : input  : 1
+    // - driving : output : 0
+    mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT);    if (mcp23018_status) goto out;
+    mcp23018_status = i2c_write(IODIRA, ERGODOX_EZ_I2C_TIMEOUT);            if (mcp23018_status) goto out;
+    mcp23018_status = i2c_write(0b00000000, ERGODOX_EZ_I2C_TIMEOUT);        if (mcp23018_status) goto out;
+    mcp23018_status = i2c_write(0b11111111, ERGODOX_EZ_I2C_TIMEOUT);        if (mcp23018_status) goto out;
+    i2c_stop();
+
+    // set pull-up
+    // - unused  : on  : 1
+    // - input   : on  : 1
+    // - driving : off : 0
+    mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT);    if (mcp23018_status) goto out;
+    mcp23018_status = i2c_write(GPPUA, ERGODOX_EZ_I2C_TIMEOUT);             if (mcp23018_status) goto out;
+    mcp23018_status = i2c_write(0b00000000, ERGODOX_EZ_I2C_TIMEOUT);        if (mcp23018_status) goto out;
+    mcp23018_status = i2c_write(0b11111111, ERGODOX_EZ_I2C_TIMEOUT);        if (mcp23018_status) goto out;
+
+out:
+    i2c_stop();
+    // SREG=sreg_prev;
+    //uprintf("Init %x\n", mcp23018_status);
+    return mcp23018_status;
+}

keyboards/ergotaco/ergotaco.h

@@ -0,0 +1,50 @@
+#pragma once
+#include <util/delay.h>
+#include <stdint.h>
+#include <stdbool.h>
+#include "quantum.h"
+#include "i2c_master.h"
+#include "matrix.h"
+
+
+extern i2c_status_t mcp23018_status;
+#define ERGODOX_EZ_I2C_TIMEOUT 1000
+#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
+#define CPU_16MHz       0x00
+
+// I2C aliases and register addresses (see "mcp23018.md")
+//#define I2C_ADDR        0b0100000
+#define I2C_ADDR        0x20
+#define I2C_ADDR_WRITE  ( (I2C_ADDR<<1) | I2C_WRITE )
+#define I2C_ADDR_READ   ( (I2C_ADDR<<1) | I2C_READ  )
+#define IODIRA          0x00            // i/o direction register
+#define IODIRB          0x01
+#define GPPUA           0x0C            // GPIO pull-up resistor register
+#define GPPUB           0x0D
+#define GPIOA           0x12            // general purpose i/o port register (write modifies OLAT)
+#define GPIOB           0x13
+#define OLATA           0x14            // output latch register
+#define OLATB           0x15
+
+void init_ergodox(void);
+uint8_t init_mcp23018(void);
+
+/*  ---------- LEFT HAND -----------   ---------- RIGHT HAND ---------- */
+#define LAYOUT(                                                          \
+    L00,L01,L02,L03,L04,L05,                   R00,R01,R02,R03,R04,R05)  \
+                                                                         \
+   /* matrix positions */                                                \
+    {			\
+    {R00},     \
+    {R01},     \
+    {R02},     \
+    {R03},     \
+    {R04},     \
+    {R05},     \
+    {L05},     \
+    {L04},     \
+    {L03},     \
+    {L02},     \
+    {L01},     \
+    {L00},     \
+}

keyboards/ergotaco/info.json

@@ -0,0 +1,61 @@
+{
+    "keyboard_name": "ErgoTaco",
+    "url": "http://gboards.ca",
+    "maintainer": "germ",
+    "width": 13,
+    "height": 2.75,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {
+                    "x": 0,
+                    "y": 1.25
+                },
+                {
+                    "x": 1,
+                    "y": 0.75
+                },
+                {
+                    "x": 2,
+                    "y": 0.5
+                },
+                {
+                    "x": 3,
+                    "y": 0.25
+                },
+                {
+                    "x": 4,
+                    "y": 1
+                },
+                {
+                    "x": 5,
+                    "y": 1.75
+                },
+                {
+                    "x": 7,
+                    "y": 1.75
+                },
+                {
+                    "x": 8,
+                    "y": 1
+                },
+                {
+                    "x": 9,
+                    "y": 0.25
+                },
+                {
+                    "x": 10,
+                    "y": 0.5
+                },
+                {
+                    "x": 11,
+                    "y": 0.75
+                },
+                {
+                    "x": 12,
+                    "y": 1.25
+                }
+            ]
+        }
+    }
+}

keyboards/ergotaco/keymaps/default/keymap.c

@@ -0,0 +1,42 @@
+/* Good on you for modifying your layout! if you don't have 
+ * time to read the QMK docs, a list of keycodes can be found at
+ *
+ * https://github.com/qmk/qmk_firmware/blob/master/docs/keycodes.md
+ *
+ * There's also a template for adding new layers at the bottom of this file!
+ */
+
+#include QMK_KEYBOARD_H
+
+#define FIESTA   0 // default layer
+#define TACOTIME 1 // symbols
+
+// Blank template at the bottom
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap template 
+ *
+ * ,-------------------------------------------------.           ,--------------------------------------------.
+ * |       |      |      |      |      |      |      |           |       |      |      |      |      |        |
+ * `-------+------+------+------+------+-------------'           `-------+------+------+------+------+--------' */
+[FIESTA] = LAYOUT(  
+   KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y,        KC_A, KC_S, KC_D, KC_F, KC_G, KC_H
+),
+};
+
+/* Keymap template 
+ *
+ * ,-------------------------------------------------.           ,--------------------------------------------.
+ * |       |      |      |      |      |      |      |           |       |      |      |      |      |        |
+ * `-------+------+------+------+------+-------------'           `-------+------+------+------+------+--------'
+[FIESTA] = LAYOUT(  
+   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+),
+ */
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+};
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+};

keyboards/ergotaco/keymaps/default/readme.md

@@ -0,0 +1,6 @@
+This is the default keymap for the ErgoTaco, Make it your own!
+
+## Settings
+To edit various settings, enable the 1u trackball and whatnot please modify /keyboards/ergotaco/keymaps/default/rules.mk
+
+Ideally you should copy this directory and make your changes there. If you come up with a good layout submit a PR!

keyboards/ergotaco/keymaps/default/rules.mk

@@ -0,0 +1,10 @@
+#----------------------------------------------------------------------------
+# make ergotaco:default:dfu
+# Make sure you have dfu-programmer installed!
+#----------------------------------------------------------------------------
+# Firmware options
+
+#Debug options
+VERBOSE 		 		= yes
+DEBUG_MATRIX_SCAN_RATE  = no
+DEBUG_MATRIX		 	= yes

keyboards/ergotaco/matrix.c

@@ -0,0 +1,366 @@
+/*
+Note for ErgoDox EZ customizers: Here be dragons!
+This is not a file you want to be messing with.
+All of the interesting stuff for you is under keymaps/ :)
+Love, Erez
+
+Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "matrix.h"
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include "wait.h"
+#include "action_layer.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include QMK_KEYBOARD_H
+#ifdef DEBUG_MATRIX_SCAN_RATE
+#include  "timer.h"
+#endif
+
+#ifndef DEBOUNCE
+#   define DEBOUNCE	5
+#endif
+
+// ATmega pin defs
+#define ROW1  (1<<5)
+#define COL6  (1<<0)
+#define COL7  (1<<1)
+#define COL8  (1<<2)
+#define COL9  (1<<3)
+#define COL10 (1<<2)
+#define COL11 (1<<3)
+
+
+// bit masks
+#define BMASK     (COL7 | COL8 | COL9 | COL6)
+#define DMASK     (COL10 | COL11)
+#define FMASK     (ROW1)
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+/*
+ * matrix state(1:on, 0:off)
+ * contains the raw values without debounce filtering of the last read cycle.
+ */
+static matrix_row_t raw_matrix[MATRIX_ROWS];
+
+// Debouncing: store for each key the number of scans until it's eligible to
+// change.  When scanning the matrix, ignore any changes in keys that have
+// already changed in the last DEBOUNCE scans.
+static uint8_t debounce_matrix[MATRIX_ROWS * MATRIX_COLS];
+
+static matrix_row_t read_cols(uint8_t row);
+static void init_cols(void);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+
+static uint8_t mcp23018_reset_loop;
+// static uint16_t mcp23018_reset_loop;
+
+#ifdef DEBUG_MATRIX_SCAN_RATE
+uint32_t matrix_timer;
+uint32_t matrix_scan_count;
+#endif
+
+
+__attribute__ ((weak))
+void matrix_init_user(void) {}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+  matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+  matrix_scan_user();
+}
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+
+void matrix_init(void)
+{
+    // initialize row and col
+    mcp23018_status = init_mcp23018();
+    unselect_rows();
+    init_cols();
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        raw_matrix[i] = 0;
+        for (uint8_t j=0; j < MATRIX_COLS; ++j) {
+            debounce_matrix[i * MATRIX_COLS + j] = 0;
+        }
+    }
+
+#ifdef DEBUG_MATRIX_SCAN_RATE
+    matrix_timer = timer_read32();
+    matrix_scan_count = 0;
+#endif
+    matrix_init_quantum();
+}
+
+void matrix_power_up(void) {
+    mcp23018_status = init_mcp23018();
+
+    unselect_rows();
+    init_cols();
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+    }
+
+#ifdef DEBUG_MATRIX_SCAN_RATE
+    matrix_timer = timer_read32();
+    matrix_scan_count = 0;
+#endif
+
+}
+
+// Returns a matrix_row_t whose bits are set if the corresponding key should be
+// eligible to change in this scan.
+matrix_row_t debounce_mask(matrix_row_t rawcols, uint8_t row) {
+  matrix_row_t result = 0;
+  matrix_row_t change = rawcols ^ raw_matrix[row];
+  raw_matrix[row] = rawcols;
+  for (uint8_t i = 0; i < MATRIX_COLS; ++i) {
+    if (debounce_matrix[row * MATRIX_COLS + i]) {
+      --debounce_matrix[row * MATRIX_COLS + i];
+    } else {
+      result |= (1 << i);
+    }
+    if (change & (1 << i)) {
+      debounce_matrix[row * MATRIX_COLS + i] = DEBOUNCE;
+    }
+  }
+  return result;
+}
+
+matrix_row_t debounce_read_cols(uint8_t row) {
+  // Read the row without debouncing filtering and store it for later usage.
+  matrix_row_t cols = read_cols(row);
+  // Get the Debounce mask.
+  matrix_row_t mask = debounce_mask(cols, row);
+  // debounce the row and return the result.
+  return (cols & mask) | (matrix[row] & ~mask);;
+}
+
+uint8_t matrix_scan(void)
+{
+  // Then the keyboard
+  if (mcp23018_status) { // if there was an error
+      if (++mcp23018_reset_loop == 0) {
+      // if (++mcp23018_reset_loop >= 1300) {
+          // since mcp23018_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans
+          // this will be approx bit more frequent than once per second
+          print("trying to reset mcp23018\n");
+          mcp23018_status = init_mcp23018();
+          if (mcp23018_status) {
+              print("left side not responding\n");
+          } else {
+              print("left side attached\n");
+          }
+      }
+  }
+
+#ifdef DEBUG_MATRIX_SCAN_RATE
+    matrix_scan_count++;
+    uint32_t timer_now = timer_read32();
+    if (TIMER_DIFF_32(timer_now, matrix_timer)>1000) {
+        print("matrix scan frequency: ");
+        pdec(matrix_scan_count);
+        print("\n");
+
+        matrix_timer = timer_now;
+        matrix_scan_count = 0;
+    }
+#endif
+    for (uint8_t i = 0; i < MATRIX_ROWS_PER_SIDE; i++) {
+        select_row(i);
+        // and select on left hand
+        select_row(i + MATRIX_ROWS_PER_SIDE);
+        // we don't need a 30us delay anymore, because selecting a
+        // left-hand row requires more than 30us for i2c.
+
+        // grab cols from left hand
+        matrix[i] = debounce_read_cols(i);
+        // grab cols from right hand
+        matrix[i + MATRIX_ROWS_PER_SIDE] = debounce_read_cols(i + MATRIX_ROWS_PER_SIDE);
+
+        unselect_rows();
+    }
+
+    matrix_scan_quantum();
+
+#ifdef DEBUG_MATRIX
+    for (uint8_t c = 0; c < MATRIX_COLS; c++) 
+		for (uint8_t r = 0; r < MATRIX_ROWS; r++) 
+		  if (matrix_is_on(r, c)) xprintf("r:%d c:%d \n", r, c);
+#endif
+
+    return 1;
+}
+
+bool matrix_is_modified(void) // deprecated and evidently not called.
+{
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 0123456789ABCDEF\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        pbin_reverse16(matrix_get_row(row));
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += bitpop16(matrix[i]);
+    }
+    return count;
+}
+
+// Remember this means ROWS
+static void  init_cols(void)
+{
+    // init on mcp23018
+    // not needed, already done as part of init_mcp23018()
+
+    // Input with pull-up(DDR:0, PORT:1)
+    DDRF  &= ~FMASK;
+    PORTF |=  FMASK;
+}
+
+static matrix_row_t read_cols(uint8_t row)
+{
+    if (row < 6) {
+        if (mcp23018_status) { // if there was an error
+            return 0;
+        } else {
+            uint8_t data = 0;
+            mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT);    if (mcp23018_status) goto out;
+            mcp23018_status = i2c_write(GPIOB, ERGODOX_EZ_I2C_TIMEOUT);             if (mcp23018_status) goto out;
+            mcp23018_status = i2c_start(I2C_ADDR_READ, ERGODOX_EZ_I2C_TIMEOUT);     if (mcp23018_status) goto out;
+            mcp23018_status = i2c_read_nack(ERGODOX_EZ_I2C_TIMEOUT);                if (mcp23018_status < 0) goto out;
+            data = (~((uint8_t)mcp23018_status) >> 2) & 0x01 ;
+            mcp23018_status = I2C_STATUS_SUCCESS;
+        out:
+            i2c_stop();
+
+#ifdef DEBUG_MATRIX
+            if (data != 0x00) xprintf("I2C: %d\n", data);
+#endif
+            return data;
+        }
+    } else {
+		// Read using bitmask
+        return ~((((PINF & ROW1) >> 5)) & 0x1);
+    }
+}
+
+// Row pin configuration
+static void unselect_rows(void)
+{
+    // no need to unselect on mcp23018, because the select step sets all
+    // the other row bits high, and it's not changing to a different
+    // direction
+    // Hi-Z(DDR:0, PORT:0) to unselect
+    DDRB  &= ~BMASK;
+    PORTB &= ~BMASK;
+    DDRD  &= ~DMASK;
+    PORTD &= ~DMASK;
+}
+
+static void select_row(uint8_t row)
+{
+    if (row < 6) {
+        // select on mcp23018 
+        if (mcp23018_status) { // do nothing on error
+			// Read using bitmask
+        } else { // set active row low  : 0 // set other rows hi-Z : 1 
+            mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT);        if (mcp23018_status) goto out;
+            mcp23018_status = i2c_write(GPIOA, ERGODOX_EZ_I2C_TIMEOUT);                 if (mcp23018_status) goto out;
+            mcp23018_status = i2c_write(~(1<<row), ERGODOX_EZ_I2C_TIMEOUT);      		if (mcp23018_status) goto out;
+        out:
+            i2c_stop();
+        }
+    } else {
+        // Output low(DDR:1, PORT:0) to select
+        switch (row) {
+            case 6:
+                DDRB  |= COL6;
+                PORTB &= ~COL6;
+                break;
+            case 7:
+                DDRB  |= COL7;
+                PORTB &= ~COL7;
+                break;
+            case 8:
+                DDRB  |= COL8;
+                PORTB &= ~COL8;
+                break;
+            case 9:
+                DDRB  |= COL9;
+                PORTB &= ~COL9;
+                break;
+            case 10:
+                DDRD  |= COL10;
+                PORTD &= ~COL10;
+                break;
+            case 11:
+                DDRD  |= COL11;
+                PORTD &= ~COL11;
+                break;
+        }
+    }
+}

keyboards/ergotaco/readme.md

@@ -0,0 +1,24 @@
+# Gergo
+
+![ErgoTaco](https://i.redd.it/dbcu5i21m3i21.jpg)
+
+It's a Taco with a side of HASL. A 12 key fiesta of a board.
+
+Keyboard Maintainer: [Jeremy Bernhardt](https://github.com/germ)  
+Hardware Supported: ErgoTaco  
+Hardware Availability: [gboards.ca](http://gboards.ca)  
+
+## Firmware building
+Clone the QMK Repo and install dfu-programmer, flash with:
+
+    make ergotaco:default:dfu
+
+And reset your keyboard!
+
+To just test if your build system is sane, try compiling the default keymap using:
+   
+    make ergotaco:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Have an idea? [Reach out to me!](mailto:bernhardtjeremy@gmail.com)

keyboards/ergotaco/rules.mk

@@ -0,0 +1,26 @@
+#----------------------------------------------------------------------------
+# make ergotaco:default:dfu
+# Make sure you have dfu-programmer installed!
+# Do not edit this file! Make a copy of keymaps/default and modify that!
+#----------------------------------------------------------------------------
+
+# Hardware info
+MCU = atmega32u4
+F_CPU = 16000000
+ARCH = AVR8
+BOOTLOADER = atmel-dfu
+F_USB = $(F_CPU)
+
+CUSTOM_MATRIX 		= yes
+EXTRAKEY_ENABLE		= yes
+CONSOLE_ENABLE  	= yes
+COMMAND_ENABLE		= yes
+
+# A bunch of stuff that you shouldn't touch unless you
+# know what you're doing.
+#
+# No touchy, capiche?
+SRC += matrix.c i2c_master.c
+ifeq ($(strip $(DEBUG_MATRIX)), yes)
+    OPT_DEFS += -DDEBUG_MATRIX
+endif

keyboards/exclusive/e6v2/bmc/bmc.c

@@ -0,0 +1,96 @@
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "bmc.h"
+#include "rgblight.h"
+#include "i2c.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}
+
+#ifdef RGBLIGHT_ENABLE
+extern rgblight_config_t rgblight_config;
+
+void rgblight_set(void) {
+    if (!rgblight_config.enable) {
+        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
+            led[i].r = 0;
+            led[i].g = 0;
+            led[i].b = 0;
+        }
+    }
+
+    i2c_init();
+    i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
+}
+#endif
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+void backlight_init_ports(void) {
+    // initialize pins D0, D1, D4 and D6 as output
+    setPinOutput(D0);
+    setPinOutput(D1);
+    setPinOutput(D4);
+    setPinOutput(D6);
+
+    // turn RGB LEDs on
+    writePinHigh(D0);
+    writePinHigh(D1);
+    writePinHigh(D4);
+    writePinHigh(D6);
+}
+
+void backlight_set(uint8_t level) {
+	if (level == 0) {
+        // turn RGB LEDs off
+        writePinLow(D0);
+        writePinLow(D1);
+        writePinLow(D4);
+        writePinLow(D6);
+	} else {
+        // turn RGB LEDs on
+        writePinHigh(D0);
+        writePinHigh(D1);
+        writePinHigh(D4);
+        writePinHigh(D6);
+	}
+}

keyboards/exclusive/e6v2/bmc/bmc.h

@@ -0,0 +1,101 @@
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+
+// LAYOUT_all ignores the key often coded as ~# to the left of Enter on ISO layouts. 
+// This is done as it shares the same row AND col as the pipe key. 
+#define LAYOUT_all( \
+    k50, k41, k42, k43, k44, k45, k61, k68, k78, k71, k49, k48, k47, k52, k4A, \
+    k30, k31, k32, k33, k34, k35, k62, k67, k77, k72, k39, k38, k37, k36,      \
+    k20, k21, k22, k23, k24, k25, k63, k66, k76, k73, k29, k28, k26,           \
+    k10, k53, k11, k12, k13, k14, k15, k64, k6A, k7A, k74, k19, k18, k54,      \
+    k00, k01, k02, k75, k04, k08, k09, k05                                     \
+) \
+{ \
+    { k00,   k01,   k02,   KC_NO, k04, k05,   KC_NO, KC_NO, k08,   k09,   KC_NO }, \
+    { k10,   k11,   k12,   k13,   k14, k15,   KC_NO, KC_NO, k18,   k19,   KC_NO }, \
+    { k20,   k21,   k22,   k23,   k24, k25,   k26,   KC_NO, k28,   k29,   KC_NO }, \
+    { k30,   k31,   k32,   k33,   k34, k35,   k36,   k37,   k38,   k39,   KC_NO }, \
+    { KC_NO, k41,   k42,   k43,   k44, k45,   KC_NO, k47,   k48,   k49,   k4A   }, \
+    { k50,   KC_NO, k52,   k53,   k54, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+    { KC_NO, k61,   k62,   k63,   k64, KC_NO, k66,   k67,   k68,   KC_NO, k6A   }, \
+    { KC_NO, k71,   k72,   k73,   k74, k75,   k76,   k77,   k78,   KC_NO, k7A   }, \
+}
+
+#define LAYOUT_60_ansi( \
+    k50, k41, k42, k43, k44, k45, k61, k68, k78, k71, k49, k48, k47, k4A, \
+    k30, k31, k32, k33, k34, k35, k62, k67, k77, k72, k39, k38, k37, k36, \
+    k20, k21, k22, k23, k24, k25, k63, k66, k76, k73, k29, k28, k26,      \
+    k10, k11, k12, k13, k14, k15, k64, k6A, k7A, k74, k19, k18,           \
+    k00, k01, k02, k75, k04, k08, k09, k05                                \
+) \
+{ \
+    { k00,   k01,   k02,   KC_NO, k04,   k05,   KC_NO, KC_NO, k08,   k09,   KC_NO }, \
+    { k10,   k11,   k12,   k13,   k14,   k15,   KC_NO, KC_NO, k18,   k19,   KC_NO }, \
+    { k20,   k21,   k22,   k23,   k24,   k25,   k26,   KC_NO, k28,   k29,   KC_NO }, \
+    { k30,   k31,   k32,   k33,   k34,   k35,   k36,   k37,   k38,   k39,   KC_NO }, \
+    { KC_NO, k41,   k42,   k43,   k44,   k45,   KC_NO, k47,   k48,   k49,   k4A   }, \
+    { k50,   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+    { KC_NO, k61,   k62,   k63,   k64,   KC_NO, k66,   k67,   k68,   KC_NO, k6A   }, \
+    { KC_NO, k71,   k72,   k73,   k74,   k75,   k76,   k77,   k78,   KC_NO, k7A   }, \
+}
+
+#define LAYOUT_60_hhkb( \
+    k50, k41, k42, k43, k44, k45, k61, k68, k78, k71, k49, k48, k47, k52, k4A, \
+    k30, k31, k32, k33, k34, k35, k62, k67, k77, k72, k39, k38, k37, k36,      \
+    k20, k21, k22, k23, k24, k25, k63, k66, k76, k73, k29, k28, k26,           \
+    k10, k11, k12, k13, k14, k15, k64, k6A, k7A, k74, k19, k18, k54,           \
+    k01, k02, k75, k08, k09                                                    \
+) \
+{ \
+    { KC_NO, k01,   k02,   KC_NO, KC_NO, k05,   KC_NO, KC_NO, k08,   k09,   KC_NO }, \
+    { k10,   k11,   k12,   k13,   k14,   k15,   KC_NO, KC_NO, k18,   k19,   KC_NO }, \
+    { k20,   k21,   k22,   k23,   k24,   k25,   k26,   KC_NO, k28,   k29,   KC_NO }, \
+    { k30,   k31,   k32,   k33,   k34,   k35,   k36,   k37,   k38,   k39,   KC_NO }, \
+    { KC_NO, k41,   k42,   k43,   k44,   k45,   KC_NO, k47,   k48,   k49,   k4A   }, \
+    { k50,   KC_NO, k52,   KC_NO, k54,   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+    { KC_NO, k61,   k62,   k63,   k64,   KC_NO, k66,   k67,   k68,   KC_NO, k6A   }, \
+    { KC_NO, k71,   k72,   k73,   k74,   k75,   k76,   k77,   k78,   KC_NO, k7A   }, \
+}
+
+#define LAYOUT_60_tsangan( \
+    k50, k41, k42, k43, k44, k45, k61, k68, k78, k71, k49, k48, k47, k52, k4A, \
+    k30, k31, k32, k33, k34, k35, k62, k67, k77, k72, k39, k38, k37, k36,      \
+    k20, k21, k22, k23, k24, k25, k63, k66, k76, k73, k29, k28, k26,           \
+    k10, k11, k12, k13, k14, k15, k64, k6A, k7A, k74, k19, k18, k54,           \
+    k00, k01, k02, k75, k08, k09, k05                                          \
+) \
+{ \
+    { k00,   k01,   k02,   KC_NO, KC_NO, k05,   KC_NO, KC_NO, k08,   k09,   KC_NO }, \
+    { k10,   k11,   k12,   k13,   k14,   k15,   KC_NO, KC_NO, k18,   k19,   KC_NO }, \
+    { k20,   k21,   k22,   k23,   k24,   k25,   k26,   KC_NO, k28,   k29,   KC_NO }, \
+    { k30,   k31,   k32,   k33,   k34,   k35,   k36,   k37,   k38,   k39,   KC_NO }, \
+    { KC_NO, k41,   k42,   k43,   k44,   k45,   KC_NO, k47,   k48,   k49,   k4A   }, \
+    { k50,   KC_NO, k52,   KC_NO, k54,   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+    { KC_NO, k61,   k62,   k63,   k64,   KC_NO, k66,   k67,   k68,   KC_NO, k6A   }, \
+    { KC_NO, k71,   k72,   k73,   k74,   k75,   k76,   k77,   k78,   KC_NO, k7A   }, \
+}

keyboards/exclusive/e6v2/bmc/config.h

@@ -0,0 +1,57 @@
+/*
+Copyright 2019 MechMerlin
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    exclusive
+#define PRODUCT         e6v2 bmc
+#define DESCRIPTION     A custom 60% keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 11
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+
+//                        0   1   2   3   4   5   6   7   8   9   A
+#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 }
+#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, C2, C3, C4, C5, D7 }
+#define DIODE_DIRECTION COL2ROW
+
+
+#define RGBLED_NUM 6
+#define RGBLIGHT_ANIMATIONS
+
+#define NO_UART 1
+#define BOOTLOADHID_BOOTLOADER 1
+
+// Set bootmagic lite key to the key commonly programmed as Esc. 
+#define BOOTMAGIC_LITE_ROW 5
+#define BOOTMAGIC_LITE_COLUMN 0

keyboards/exclusive/e6v2/bmc/i2c.c

@@ -0,0 +1,106 @@
+/*
+Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+// Please do not modify this file 
+
+#include <avr/io.h>
+#include <util/twi.h>
+
+#include "i2c.h"
+
+void i2c_set_bitrate(uint16_t bitrate_khz) {
+    uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
+    if (bitrate_div >= 16) {
+        bitrate_div = (bitrate_div - 16) / 2;
+    }
+    TWBR = bitrate_div;
+}
+
+void i2c_init(void) {
+    // set pull-up resistors on I2C bus pins
+    PORTC |= 0b11;
+
+    i2c_set_bitrate(400);
+
+    // enable TWI (two-wire interface)
+    TWCR |= (1 << TWEN);
+
+    // enable TWI interrupt and slave address ACK
+    TWCR |= (1 << TWIE);
+    TWCR |= (1 << TWEA);
+}
+
+uint8_t i2c_start(uint8_t address) {
+    // reset TWI control register
+    TWCR = 0;
+
+    // begin transmission and wait for it to end
+    TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
+    while (!(TWCR & (1<<TWINT)));
+
+    // check if the start condition was successfully transmitted
+    if ((TWSR & 0xF8) != TW_START) {
+        return 1;
+    }
+
+    // transmit address and wait
+    TWDR = address;
+    TWCR = (1<<TWINT) | (1<<TWEN);
+    while (!(TWCR & (1<<TWINT)));
+
+    // check if the device has acknowledged the READ / WRITE mode
+    uint8_t twst = TW_STATUS & 0xF8;
+    if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
+        return 1;
+    }
+
+    return 0;
+}
+
+void i2c_stop(void) {
+    TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+}
+
+uint8_t i2c_write(uint8_t data) {
+    TWDR = data;
+
+    // transmit data and wait
+    TWCR = (1<<TWINT) | (1<<TWEN);
+    while (!(TWCR & (1<<TWINT)));
+
+    if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
+        return 1;
+    }
+
+    return 0;
+}
+
+uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
+    if (i2c_start(address)) {
+        return 1;
+    }
+
+    for (uint16_t i = 0; i < length; i++) {
+        if (i2c_write(data[i])) {
+            return 1;
+        }
+    }
+
+    i2c_stop();
+
+    return 0;
+}

keyboards/exclusive/e6v2/bmc/i2c.h

@@ -0,0 +1,24 @@
+/*
+Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+// Please do not modify this file 
+
+#pragma once
+
+void i2c_init(void);
+void i2c_set_bitrate(uint16_t bitrate_khz);
+uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);

keyboards/exclusive/e6v2/bmc/info.json

@@ -0,0 +1,24 @@
+{
+    "keyboard_name": "", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "width": 15, 
+    "height": 5, 
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.26}, {"x":10.0, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":12.5, "y":4, "w":1.25}, {"x":13.75, "y":4, "w":1.25}]
+        },
+
+        "LAYOUT_60_ansi": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":2.75}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":12.5, "y":4, "w":1.25}, {"x":13.75, "y":4, "w":1.25}]
+        },
+
+        "LAYOUT_60_hhkb": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Delete", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Os", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Os", "x":12.5, "y":4}]
+        },
+
+        "LAYOUT_60_tsangan": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.5}, {"x":1.5, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"x":11, "y":4, "w":1.5}, {"x":12.5, "y":4}, {"x":13.5, "y":4, "w":1.5}]
+        }
+    }
+}

keyboards/exclusive/e6v2/bmc/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/exclusive/e6v2/bmc/keymaps/default/keymap.c

@@ -0,0 +1,74 @@
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+  QMKBEST = SAFE_RANGE,
+  QMKURL
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT_60_ansi(
+        KC_GESC, KC_1,    KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
+        KC_TAB,  KC_Q,    KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+        KC_CAPS, KC_A,    KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+        KC_LSFT, KC_Z,    KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+        KC_LCTL, KC_LGUI, KC_LALT,                KC_SPC,                          KC_RALT, KC_RGUI, KC_RCTL, MO(1)
+    ),
+
+[1] = LAYOUT_60_ansi(
+       KC_GRV,  KC_F1,    KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  \
+	     BL_TOGG, BL_INC,   BL_DEC,  BL_STEP, RESET,   EEP_RST, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+       RGB_TOG, RGB_MOD,  RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          \
+       KC_TRNS, RGB_RMOD, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS,                   \
+       KC_TRNS, KC_TRNS,  KC_TRNS,       KC_TRNS,                               KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QMKBEST:
+      if (record->event.pressed) {
+        // when keycode QMKBEST is pressed
+        SEND_STRING("QMK is the best thing ever!");
+      } else {
+        // when keycode QMKBEST is released
+      }
+      break;
+    case QMKURL:
+      if (record->event.pressed) {
+        // when keycode QMKURL is pressed
+        SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER));
+      } else {
+        // when keycode QMKURL is released
+      }
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/exclusive/e6v2/bmc/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for bmc

keyboards/exclusive/e6v2/bmc/readme.md

@@ -0,0 +1,44 @@
+# E6-V2 Bootmapper Client (ps2avrgb)
+
+These docs are for the BMC version of the E6-V2 PCB which has an atmega32a microcontroller. Please do not flash this `.hex` file on your atmega32u4 equipped E6-V2. 
+
+Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)  
+Hardware Supported: ps2avrgb E6-V2 with atmega32a microcontroller  
+Hardware Availability: [geekhack.org/index.php?topic=90787.0](https://geekhack.org/index.php?topic=90787.0)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make exclusive/e6v2/bmc:default
+
+Flashing
+
+ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. 
+
+**Reset Key:**  Hold down the key located at `K00`, commonly programmed as left control while plugging in the keyboard. You may also hold down the key located at `K50`, commonly programmed as the escape key. 
+
+Windows: 
+1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
+2. Place your keyboard into reset. 
+3. Press the `Find Device` button and ensure that your keyboard is found.
+4. Press the `Open .hex File` button and locate the `.hex` file you created.
+5. Press the `Flash Device` button and wait for the process to complete. 
+
+macOS:
+1. Install homebrew by typing the following:   
+    ```
+    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
+    ```
+2. Install `crosspack-avr`.  
+    ```
+    brew cask install crosspack-avr
+    ```
+3. Install the following packages:
+    ```
+    brew install python
+    pip3 install pyusb
+    brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
+
+4. Place your keyboard into reset. 
+5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. 
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/exclusive/e6v2/bmc/rules.mk

@@ -0,0 +1,90 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32a
+PROTOCOL = VUSB
+
+NO_UART = yes
+NO_SUSPEND_POWER_DOWN = yes
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 12000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+# ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+# F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS = -DDEBUG_LEVEL=0
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = bootloadHID
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_CUSTOM_DRIVER = yes
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+
+SRC += i2c.c
+
+PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex

keyboards/exclusive/e6v2/bmc/usbconfig.h

@@ -0,0 +1,393 @@
+/* Name: usbconfig.h
+ * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
+ * Author: Christian Starkjohann
+ * Creation Date: 2005-04-01
+ * Tabsize: 4
+ * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
+ * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
+ * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
+ */
+
+#pragma once
+
+#include "config.h"
+
+/*
+General Description:
+This file is an example configuration (with inline documentation) for the USB
+driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
+also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
+wire the lines to any other port, as long as D+ is also wired to INT0 (or any
+other hardware interrupt, as long as it is the highest level interrupt, see
+section at the end of this file).
+*/
+
+/* ---------------------------- Hardware Config ---------------------------- */
+
+#define USB_CFG_IOPORTNAME      D
+/* This is the port where the USB bus is connected. When you configure it to
+ * "B", the registers PORTB, PINB and DDRB will be used.
+ */
+#define USB_CFG_DMINUS_BIT      3
+/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
+ * This may be any bit in the port.
+ */
+#define USB_CFG_DPLUS_BIT       2
+/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
+ * This may be any bit in the port. Please note that D+ must also be connected
+ * to interrupt pin INT0! [You can also use other interrupts, see section
+ * "Optional MCU Description" below, or you can connect D- to the interrupt, as
+ * it is required if you use the USB_COUNT_SOF feature. If you use D- for the
+ * interrupt, the USB interrupt will also be triggered at Start-Of-Frame
+ * markers every millisecond.]
+ */
+#define USB_CFG_CLOCK_KHZ       (F_CPU/1000)
+/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
+ * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
+ * require no crystal, they tolerate +/- 1% deviation from the nominal
+ * frequency. All other rates require a precision of 2000 ppm and thus a
+ * crystal!
+ * Since F_CPU should be defined to your actual clock rate anyway, you should
+ * not need to modify this setting.
+ */
+#define USB_CFG_CHECK_CRC       0
+/* Define this to 1 if you want that the driver checks integrity of incoming
+ * data packets (CRC checks). CRC checks cost quite a bit of code size and are
+ * currently only available for 18 MHz crystal clock. You must choose
+ * USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
+ */
+
+/* ----------------------- Optional Hardware Config ------------------------ */
+
+/* #define USB_CFG_PULLUP_IOPORTNAME   D */
+/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
+ * V+, you can connect and disconnect the device from firmware by calling
+ * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
+ * This constant defines the port on which the pullup resistor is connected.
+ */
+/* #define USB_CFG_PULLUP_BIT          4 */
+/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
+ * above) where the 1.5k pullup resistor is connected. See description
+ * above for details.
+ */
+
+/* --------------------------- Functional Range ---------------------------- */
+
+#define USB_CFG_HAVE_INTRIN_ENDPOINT    1
+/* Define this to 1 if you want to compile a version with two endpoints: The
+ * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
+ * number).
+ */
+#define USB_CFG_HAVE_INTRIN_ENDPOINT3   1
+/* Define this to 1 if you want to compile a version with three endpoints: The
+ * default control endpoint 0, an interrupt-in endpoint 3 (or the number
+ * configured below) and a catch-all default interrupt-in endpoint as above.
+ * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
+ */
+#define USB_CFG_EP3_NUMBER              3
+/* If the so-called endpoint 3 is used, it can now be configured to any other
+ * endpoint number (except 0) with this macro. Default if undefined is 3.
+ */
+/* #define USB_INITIAL_DATATOKEN           USBPID_DATA1 */
+/* The above macro defines the startup condition for data toggling on the
+ * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
+ * Since the token is toggled BEFORE sending any data, the first packet is
+ * sent with the oposite value of this configuration!
+ */
+#define USB_CFG_IMPLEMENT_HALT          0
+/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
+ * for endpoint 1 (interrupt endpoint). Although you may not need this feature,
+ * it is required by the standard. We have made it a config option because it
+ * bloats the code considerably.
+ */
+#define USB_CFG_SUPPRESS_INTR_CODE      0
+/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
+ * want to send any data over them. If this macro is defined to 1, functions
+ * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
+ * you need the interrupt-in endpoints in order to comply to an interface
+ * (e.g. HID), but never want to send any data. This option saves a couple
+ * of bytes in flash memory and the transmit buffers in RAM.
+ */
+#define USB_CFG_INTR_POLL_INTERVAL      1
+/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
+ * interval. The value is in milliseconds and must not be less than 10 ms for
+ * low speed devices.
+ */
+#define USB_CFG_IS_SELF_POWERED         0
+/* Define this to 1 if the device has its own power supply. Set it to 0 if the
+ * device is powered from the USB bus.
+ */
+#define USB_CFG_MAX_BUS_POWER           500
+/* Set this variable to the maximum USB bus power consumption of your device.
+ * The value is in milliamperes. [It will be divided by two since USB
+ * communicates power requirements in units of 2 mA.]
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITE      1
+/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
+ * transfers. Set it to 0 if you don't need it and want to save a couple of
+ * bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_READ       0
+/* Set this to 1 if you need to send control replies which are generated
+ * "on the fly" when usbFunctionRead() is called. If you only want to send
+ * data from a static buffer, set it to 0 and return the data from
+ * usbFunctionSetup(). This saves a couple of bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITEOUT   0
+/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
+ * You must implement the function usbFunctionWriteOut() which receives all
+ * interrupt/bulk data sent to any endpoint other than 0. The endpoint number
+ * can be found in 'usbRxToken'.
+ */
+#define USB_CFG_HAVE_FLOWCONTROL        0
+/* Define this to 1 if you want flowcontrol over USB data. See the definition
+ * of the macros usbDisableAllRequests() and usbEnableAllRequests() in
+ * usbdrv.h.
+ */
+#define USB_CFG_DRIVER_FLASH_PAGE       0
+/* If the device has more than 64 kBytes of flash, define this to the 64 k page
+ * where the driver's constants (descriptors) are located. Or in other words:
+ * Define this to 1 for boot loaders on the ATMega128.
+ */
+#define USB_CFG_LONG_TRANSFERS          0
+/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
+ * in a single control-in or control-out transfer. Note that the capability
+ * for long transfers increases the driver size.
+ */
+/* #define USB_RX_USER_HOOK(data, len)     if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
+/* This macro is a hook if you want to do unconventional things. If it is
+ * defined, it's inserted at the beginning of received message processing.
+ * If you eat the received message and don't want default processing to
+ * proceed, do a return after doing your things. One possible application
+ * (besides debugging) is to flash a status LED on each packet.
+ */
+/* #define USB_RESET_HOOK(resetStarts)     if(!resetStarts){hadUsbReset();} */
+/* This macro is a hook if you need to know when an USB RESET occurs. It has
+ * one parameter which distinguishes between the start of RESET state and its
+ * end.
+ */
+/* #define USB_SET_ADDRESS_HOOK()              hadAddressAssigned(); */
+/* This macro (if defined) is executed when a USB SET_ADDRESS request was
+ * received.
+ */
+#define USB_COUNT_SOF                   1
+/* define this macro to 1 if you need the global variable "usbSofCount" which
+ * counts SOF packets. This feature requires that the hardware interrupt is
+ * connected to D- instead of D+.
+ */
+/* #ifdef __ASSEMBLER__
+ * macro myAssemblerMacro
+ *     in      YL, TCNT0
+ *     sts     timer0Snapshot, YL
+ *     endm
+ * #endif
+ * #define USB_SOF_HOOK                    myAssemblerMacro
+ * This macro (if defined) is executed in the assembler module when a
+ * Start Of Frame condition is detected. It is recommended to define it to
+ * the name of an assembler macro which is defined here as well so that more
+ * than one assembler instruction can be used. The macro may use the register
+ * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
+ * immediately after an SOF pulse may be lost and must be retried by the host.
+ * What can you do with this hook? Since the SOF signal occurs exactly every
+ * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
+ * designs running on the internal RC oscillator.
+ * Please note that Start Of Frame detection works only if D- is wired to the
+ * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
+ */
+#define USB_CFG_CHECK_DATA_TOGGLING     0
+/* define this macro to 1 if you want to filter out duplicate data packets
+ * sent by the host. Duplicates occur only as a consequence of communication
+ * errors, when the host does not receive an ACK. Please note that you need to
+ * implement the filtering yourself in usbFunctionWriteOut() and
+ * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
+ * for each control- and out-endpoint to check for duplicate packets.
+ */
+#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH   0
+/* define this macro to 1 if you want the function usbMeasureFrameLength()
+ * compiled in. This function can be used to calibrate the AVR's RC oscillator.
+ */
+#define USB_USE_FAST_CRC                0
+/* The assembler module has two implementations for the CRC algorithm. One is
+ * faster, the other is smaller. This CRC routine is only used for transmitted
+ * messages where timing is not critical. The faster routine needs 31 cycles
+ * per byte while the smaller one needs 61 to 69 cycles. The faster routine
+ * may be worth the 32 bytes bigger code size if you transmit lots of data and
+ * run the AVR close to its limit.
+ */
+
+/* -------------------------- Device Description --------------------------- */
+
+#define USB_CFG_VENDOR_ID       (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
+/* USB vendor ID for the device, low byte first. If you have registered your
+ * own Vendor ID, define it here. Otherwise you may use one of obdev's free
+ * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_ID       (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
+/* This is the ID of the product, low byte first. It is interpreted in the
+ * scope of the vendor ID. If you have registered your own VID with usb.org
+ * or if you have licensed a PID from somebody else, define it here. Otherwise
+ * you may use one of obdev's free shared VID/PID pairs. See the file
+ * USB-IDs-for-free.txt for details!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_VERSION  0x00, 0x02
+/* Version number of the device: Minor number first, then major number.
+ */
+#define USB_CFG_VENDOR_NAME     'G', 'r', 'a', 'y', ' ', 'S', 't', 'u', 'd', 'i', 'o'
+#define USB_CFG_VENDOR_NAME_LEN 11
+/* These two values define the vendor name returned by the USB device. The name
+ * must be given as a list of characters under single quotes. The characters
+ * are interpreted as Unicode (UTF-16) entities.
+ * If you don't want a vendor name string, undefine these macros.
+ * ALWAYS define a vendor name containing your Internet domain name if you use
+ * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
+ * details.
+ */
+#define USB_CFG_DEVICE_NAME     'H', 'B', '8', '5'
+#define USB_CFG_DEVICE_NAME_LEN 4
+/* Same as above for the device name. If you don't want a device name, undefine
+ * the macros. See the file USB-IDs-for-free.txt before you assign a name if
+ * you use a shared VID/PID.
+ */
+/*#define USB_CFG_SERIAL_NUMBER   'N', 'o', 'n', 'e' */
+/*#define USB_CFG_SERIAL_NUMBER_LEN   0 */
+/* Same as above for the serial number. If you don't want a serial number,
+ * undefine the macros.
+ * It may be useful to provide the serial number through other means than at
+ * compile time. See the section about descriptor properties below for how
+ * to fine tune control over USB descriptors such as the string descriptor
+ * for the serial number.
+ */
+#define USB_CFG_DEVICE_CLASS        0
+#define USB_CFG_DEVICE_SUBCLASS     0
+/* See USB specification if you want to conform to an existing device class.
+ * Class 0xff is "vendor specific".
+ */
+#define USB_CFG_INTERFACE_CLASS     3   /* HID */
+#define USB_CFG_INTERFACE_SUBCLASS  1   /* Boot */
+#define USB_CFG_INTERFACE_PROTOCOL  1   /* Keyboard */
+/* See USB specification if you want to conform to an existing device class or
+ * protocol. The following classes must be set at interface level:
+ * HID class is 3, no subclass and protocol required (but may be useful!)
+ * CDC class is 2, use subclass 2 and protocol 1 for ACM
+ */
+#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH    0
+/* Define this to the length of the HID report descriptor, if you implement
+ * an HID device. Otherwise don't define it or define it to 0.
+ * If you use this define, you must add a PROGMEM character array named
+ * "usbHidReportDescriptor" to your code which contains the report descriptor.
+ * Don't forget to keep the array and this define in sync!
+ */
+
+/* #define USB_PUBLIC static */
+/* Use the define above if you #include usbdrv.c instead of linking against it.
+ * This technique saves a couple of bytes in flash memory.
+ */
+
+/* ------------------- Fine Control over USB Descriptors ------------------- */
+/* If you don't want to use the driver's default USB descriptors, you can
+ * provide our own. These can be provided as (1) fixed length static data in
+ * flash memory, (2) fixed length static data in RAM or (3) dynamically at
+ * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
+ * information about this function.
+ * Descriptor handling is configured through the descriptor's properties. If
+ * no properties are defined or if they are 0, the default descriptor is used.
+ * Possible properties are:
+ *   + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
+ *     at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
+ *     used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
+ *     you want RAM pointers.
+ *   + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
+ *     in static memory is in RAM, not in flash memory.
+ *   + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
+ *     the driver must know the descriptor's length. The descriptor itself is
+ *     found at the address of a well known identifier (see below).
+ * List of static descriptor names (must be declared PROGMEM if in flash):
+ *   char usbDescriptorDevice[];
+ *   char usbDescriptorConfiguration[];
+ *   char usbDescriptorHidReport[];
+ *   char usbDescriptorString0[];
+ *   int usbDescriptorStringVendor[];
+ *   int usbDescriptorStringDevice[];
+ *   int usbDescriptorStringSerialNumber[];
+ * Other descriptors can't be provided statically, they must be provided
+ * dynamically at runtime.
+ *
+ * Descriptor properties are or-ed or added together, e.g.:
+ * #define USB_CFG_DESCR_PROPS_DEVICE   (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
+ *
+ * The following descriptors are defined:
+ *   USB_CFG_DESCR_PROPS_DEVICE
+ *   USB_CFG_DESCR_PROPS_CONFIGURATION
+ *   USB_CFG_DESCR_PROPS_STRINGS
+ *   USB_CFG_DESCR_PROPS_STRING_0
+ *   USB_CFG_DESCR_PROPS_STRING_VENDOR
+ *   USB_CFG_DESCR_PROPS_STRING_PRODUCT
+ *   USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
+ *   USB_CFG_DESCR_PROPS_HID
+ *   USB_CFG_DESCR_PROPS_HID_REPORT
+ *   USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
+ *
+ * Note about string descriptors: String descriptors are not just strings, they
+ * are Unicode strings prefixed with a 2 byte header. Example:
+ * int  serialNumberDescriptor[] = {
+ *     USB_STRING_DESCRIPTOR_HEADER(6),
+ *     'S', 'e', 'r', 'i', 'a', 'l'
+ * };
+ */
+
+#define USB_CFG_DESCR_PROPS_DEVICE                  0
+#define USB_CFG_DESCR_PROPS_CONFIGURATION           USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_CONFIGURATION           0
+#define USB_CFG_DESCR_PROPS_STRINGS                 0
+#define USB_CFG_DESCR_PROPS_STRING_0                0
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR           0
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT          0
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER    0
+#define USB_CFG_DESCR_PROPS_HID                     USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID                     0
+#define USB_CFG_DESCR_PROPS_HID_REPORT              USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID_REPORT              0
+#define USB_CFG_DESCR_PROPS_UNKNOWN                 0
+
+#define usbMsgPtr_t unsigned short
+/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to
+ * a scalar type here because gcc generates slightly shorter code for scalar
+ * arithmetics than for pointer arithmetics. Remove this define for backward
+ * type compatibility or define it to an 8 bit type if you use data in RAM only
+ * and all RAM is below 256 bytes (tiny memory model in IAR CC).
+ */
+
+/* ----------------------- Optional MCU Description ------------------------ */
+
+/* The following configurations have working defaults in usbdrv.h. You
+ * usually don't need to set them explicitly. Only if you want to run
+ * the driver on a device which is not yet supported or with a compiler
+ * which is not fully supported (such as IAR C) or if you use a differnt
+ * interrupt than INT0, you may have to define some of these.
+ */
+/* #define USB_INTR_CFG            MCUCR */
+/* #define USB_INTR_CFG_SET        ((1 << ISC00) | (1 << ISC01)) */
+/* #define USB_INTR_CFG_CLR        0 */
+/* #define USB_INTR_ENABLE         GIMSK */
+/* #define USB_INTR_ENABLE_BIT     INT0 */
+/* #define USB_INTR_PENDING        GIFR */
+/* #define USB_INTR_PENDING_BIT    INTF0 */
+/* #define USB_INTR_VECTOR         INT0_vect */
+
+/* Set INT1 for D- falling edge to count SOF */
+/* #define USB_INTR_CFG            EICRA */
+#define USB_INTR_CFG_SET        ((1 << ISC11) | (0 << ISC10))
+/* #define USB_INTR_CFG_CLR        0 */
+/* #define USB_INTR_ENABLE         EIMSK */
+#define USB_INTR_ENABLE_BIT     INT1
+/* #define USB_INTR_PENDING        EIFR */
+#define USB_INTR_PENDING_BIT    INTF1
+#define USB_INTR_VECTOR         INT1_vect

keyboards/fc980c/README.md

@@ -155,7 +155,7 @@ Datasheets
 - AD5258: http://www.analog.com/media/en/technical-documentation/data-sheets/AD5258.pdf
 - JST S5B-PH-SM4: http://www.jst-mfg.com/product/pdf/eng/ePH.pdf
 - Hirose UX60SC-MB-5S8: https://www.hirose.com/product/en/products/UX/UX60SC-MB-5S8%2880%29/
-- Tr(E42) for LED?: http://cj-elec.com/txUpfile/2013614923661845.pdf
+- Tr(E42) for LED?: http://www.bklighting.com/cimages/specs-758.pdf
 - TYU TU1252WNR-05S: http://php2.twinner.com.tw/files/goodjob/TY1252series.pdf
 
 

keyboards/handwired/frenchdev/readme.md

@@ -19,7 +19,6 @@ with the added possibility to connect up to 6 external switches like pedals,
 ## Laser-cuttable file
 There is intentionnaly no hole for the TRRS connector, you are supposed to use a drill for it. 
 This way if you don't want to use the pedals you don't have a useless hole. Plus it's cleaner.
-http://qmk.fm/frenchdev/frenchdev_v1_lasercut_template.svg
 
 ## Side stickers
 You can find my original file here : http://qmk.fm/frenchdev/example_printable_stickers.svg

keyboards/handwired/jot50/readme.md

@@ -1,6 +1,4 @@
-# Jotanck
-
-![Jotanck]
+# Jot50
 
 A compact 50% (12x5) ortholinear keyboard kit inspired in the Preonic made by jotix.
 

keyboards/hs60/v2/keymaps/stanrc85/keymap.c

@@ -35,7 +35,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		KC_TILD, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
 		_______, _______, CA_QUOT, KC_VOLU, CA_SCLN, _______, _______, KC_HOME, KC_UP,   KC_END,  _______, _______, _______, KC_INS,
 		KC_CAPS, _______, KC_MUTE, KC_VOLD, KC_MPLY, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______,
-		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+		_______, KC_RDP,  _______, _______, _______, _______, _______, _______, KC_WBAK, KC_WFWD, _______, _______,
 		_______, _______, _______,                   _______,                   _______, _______, _______, _______),
 
 	[3] = LAYOUT_60_ansi(

keyboards/katana60/keymaps/msiu/config.h

@@ -0,0 +1,21 @@
+/* Copyright 2017 Baris Tosun
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+
+// place overrides here
+

keyboards/katana60/keymaps/msiu/keymap.c

@@ -0,0 +1,70 @@
+#include QMK_KEYBOARD_H
+
+// Mod-Tap keys for cleaner code
+#define ESC_CTL LCTL_T(KC_ESC)
+#define SPC_LW LT(2, KC_SPC)
+#define ENT_FN LT(4, KC_ENT)
+
+#define _QW 0
+#define _DV 1
+#define _LW 2
+#define _RS 3
+#define _FN 4
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[_QW] = LAYOUT( /* Base */
+  KC_ESC,  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    TG(1),   KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_PLUS,
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_LBRC,          KC_RBRC, KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+  ESC_CTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_HOME,          KC_PGUP, KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_END,  KC_DEL,  KC_PGDN, KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,
+  KC_LCTL, KC_HYPR, KC_LALT, KC_LGUI,                   SPC_LW,  ENT_FN,  KC_SPC,           MO(3),   KC_LEFT, KC_DOWN, KC_UP,   KC_RIGHT
+    ),
+[_DV] = LAYOUT(
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    _______,          _______, KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    _______,
+  _______, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    _______,          _______, KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH,
+  _______, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    _______, _______, _______, KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    _______,
+  _______, _______, _______, _______,                   _______, _______, _______,          _______, _______, _______, _______, _______
+    ),
+[_LW] = LAYOUT(
+  _______, _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   _______, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,
+  _______, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, _______,          _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,
+  _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,            _______, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______, _______, KC_PGDN, KC_PGUP, KC_HOME, KC_END , KC_MUTE,
+  _______, _______, _______, _______,                   _______, _______, _______,          _______, _______, _______, _______, _______
+    ),
+[_RS] = LAYOUT(
+  _______, _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   _______, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,
+  _______, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    _______,          _______, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______,
+  _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,            _______, _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______, _______, KC_PGDN, KC_PGUP, KC_HOME, KC_END , KC_MUTE,
+  _______, _______, _______, _______,                   _______, _______, _______,          _______, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT
+    ),
+[_FN] = LAYOUT(
+  _______, _______, _______, _______, _______, _______, _______, RESET,   _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, KC_UP,   _______, KC_PSCR, _______,
+  _______, _______, _______, _______, _______, _______, _______,          _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______,                   _______, _______, _______,          _______, _______, _______, _______, _______
+    )
+};
+
+
+
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/katana60/keymaps/msiu/readme.md

@@ -0,0 +1,3 @@
+# msiu's keymap for katana: standard QWERTY layout with planck like layers
+
+This layout take a standard QWERTY default layer, with raise and lower layers similar to planck. It is for me to easily transition between keyboards. I put a few nav keys in the 'tree' middle, but I have come to realise I rarely use them as I am used to the planck layering. Top of the tree is a toggle for Dvorak layer. 

keyboards/kbdfans/kbd67/readme.md

@@ -1,7 +1,9 @@
 # KBD67
 
-A 65% keyboard sold in two variants. Rev1 was a typical keyboard that had to be soldered together, supporting multiple layouts. 
-Months later, a new version with hotswap was sold. **Firmware files from one, will not work on the other.** Please use the `.hex` appropriate for your board. 
+A 65% keyboard sold in two variants. Rev1 was a typical keyboard that had to be soldered together, supporting multiple layouts.
+Months later, a new version with hotswap was sold. **Firmware files from one, will not work on the other.** Please use the `.hex` appropriate for your board.
+
+The rev1 PCB for the KBD67 is sold under the name "KBD65."
 
 Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)  
 Hardware Supported: KBD67  

keyboards/kbdfans/kbd67/rev1/readme.md

@@ -3,8 +3,8 @@
 65% keyboard with blocker.  
 
 Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)  
-Hardware Supported: KBD67 PCB  
-Hardware Availability: [KBDFans](https://kbdfans.cn/products/coming-soon-kbd67-mechanical-keyboard-diy-kit)
+Hardware Supported: KBD67 PCB (Sometimes sold under the name "KBD65")  
+Hardware Availability: KBDFans [Keyboard Kit](https://kbdfans.cn/products/coming-soon-kbd67-mechanical-keyboard-diy-kit), [PCB](https://kbdfans.cn/collections/65/products/kbd65-65-custom-mechanical-keyboard-pcb)
 
 Make example for this keyboard (after setting up your build environment):
 

keyboards/kc60/keymaps/stanleylai/readme.md

@@ -1,8 +1,6 @@
 Stanley Lai's Split Right Shift with Dedicated Arrow Keys
 ======================
 
-![Image of KC60 with RGB Underglow](../ws2812/ws2812_example.jpg)
-
 ## Quantum MK Firmware
 For the full Quantum feature list, see [the parent readme.md](/readme.md).
 
@@ -20,7 +18,7 @@ For the full Quantum feature list, see [the parent readme.md](/readme.md).
 ![RGB Layer](http://imgur.com/ZWIfuPM)
 
 ## WS2812 Support
-By default, it is now setup for 16 LEDs on the PF5 breakout pin. See [included image](../ws2812/ws2812_wiring.jpg) for wiring reference.
+By default, it is now setup for 16 LEDs on the PF5 breakout pin.
 
 ### Build
 To build this keymap, simply run `make KEYMAP=stanleylai`.

keyboards/kc60/readme.md

@@ -24,7 +24,6 @@ $ make [default|jack|<name>]
 Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
 
 ## WS2812 Support
-![Image of KC60 with RGB Underglow](keymaps/ws2812/ws2812_example.jpg)
 
 Build with WS2812 Support by running `make ws2812`.
 

keyboards/kmac/readme.md

@@ -20,7 +20,7 @@ For the full Quantum feature list, see the [documentation](https://docs.qmk.fm).
 
 The KMAC are available with two different PCB layouts, a winkey version and a winkeyless version. A default keymap are provided for each versions of the PCB.
 
-Depending on which PCB and keymap you would like to use, you will have to compile the firmware slightly differently. All of the commands should be run in the [keyboards/kmac](/keyboards/kmac) folder.
+Depending on which PCB and keymap you would like to use, you will have to compile the firmware slightly differently. All of the commands should be run in the [qmk root](https://github.com/qmk/qmk_firmware/) folder.
 
 ### Winkey keymap
 

keyboards/knops/readme.md

@@ -7,4 +7,4 @@
 * Maintainer: [Pawnerd](https://github.com/pawnerd)
 * Hardware Supported:
   * [`Mini`](mini/): Knops Mini
-* Hardware Availability: [knops.io](https://www.knops.io/)
+* Hardware Availability: [knops.io](http://www.knops.io/)

keyboards/lets_split/keymaps/piemod/README.md

@@ -17,9 +17,6 @@ A keymap for users that need:
 
 Still a work-in-progress. Suggestions welcome @ https://github.com/dwrz/piemod.
 
-### Keymap
-
-![PieMod Keymap](./keymap.png)
 
 ### TODO
 

keyboards/lets_split_eh/keymaps/msiu/config.h

@@ -0,0 +1,21 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once

keyboards/lets_split_eh/keymaps/msiu/keymap.c

@@ -0,0 +1,195 @@
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _DVORAK 1
+
+#define _LOWER 3
+#define _RAISE 4
+
+#define _NUMB 14
+#define _FUNC 15
+#define _ADJUST 16
+
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  DVORAK,
+  LOWER,
+  RAISE,
+  ADJUST
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  '   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl |Hyper | Alt  | GUI  |Lower | Func |Space |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = LAYOUT( \
+  LT(_NUMB, KC_TAB),   KC_Q,    KC_W,    KC_E,    KC_R,  KC_T,      KC_Y,   KC_U,  KC_I,    KC_O,    KC_P,    KC_BSPC, \
+  LCTL_T(KC_ESC),      KC_A,    KC_S,    KC_D,    KC_F,  KC_G,      KC_H,   KC_J,  KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+  KC_LSFT,             KC_Z,    KC_X,    KC_C,    KC_V,  KC_B,      KC_N,   KC_M,  KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,  \
+  KC_LCTL,             KC_HYPR, KC_LALT, KC_LGUI, LOWER, MO(_FUNC), KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT  \
+),
+
+// Dvorak
+[_DVORAK] = LAYOUT( \
+  _______, KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,     KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    _______, \
+  _______, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,     KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH, \
+  _______, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,     KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    _______ , \
+  _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______  \
+),
+
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |Enter |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |      |      | Mute |      |  |   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |Lower | Bksp | Bksp |Raise | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = LAYOUT( \
+  KC_TILD, KC_EXLM,  KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,  \
+  _______, KC_F1,    KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
+  _______, KC_F7,    KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PGDN, KC_PGUP, KC_HOME, KC_END , KC_MUTE, \
+  _______, _______,  _______, _______, _______, _______, KC_MPLY, _______, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT  \
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |   4  |   5  |   6  |   +  |  F5  |  F6  |   -  |   =  |   [  |   ]  |Enter |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |Enter |   7  |   8  |   9  |   -  |  F11 |  F12 |ISO # |ISO / | Mute |      |   \  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |   ,  |   0  |  .   |Lower | Bksp | Bksp |Raise | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = LAYOUT( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,   KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,  \
+  _______, KC_4,    KC_5,    KC_6,   KC_PLUS, KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
+  _______, KC_7,    KC_8,    KC_9,   KC_MINS, KC_F11,  KC_F12,  KC_PGDN, KC_PGUP, KC_HOME, KC_END , KC_MUTE, \
+  _______, _______, _______, _______, _______, _______, KC_MPLY, _______, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT  \
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |Taskmg|      |      |      |      |      |      |      |RGBVAI|RGBSAI|RGBHUI|caltde|
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |Qwerty|RGBVAD|RGBSAD|RGBHUD|RGBTOG|
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |BLSTEP|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      | RESET|
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = LAYOUT( \
+  RGB_TOG, RGB_VAI, RGB_SAI, RGB_HUI, _______, _______, _______, _______, _______, _______, _______, _______, \
+  RGB_MOD, RGB_VAD, RGB_SAD, RGB_HUD, _______, _______, _______, QWERTY,  DVORAK,  _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET    \
+),
+
+/* FUNC
+ * ,-----------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |  Up  |      |      |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      | Left | Down |Right |      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Caps |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_FUNC] = LAYOUT( \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_UP,   _______, KC_PSCR, _______, \
+  _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______  \
+),
+
+// Numpad
+[_NUMB] = LAYOUT( \
+  _______, _______, _______, _______, _______, _______, _______, KC_7,    KC_8,    KC_9,    _______, KC_BSPC,  \
+  _______, _______, _______, _______, _______, _______, _______, KC_4,    KC_5,    KC_6,    _______, _______,  \
+  _______, _______, _______, _______, _______, _______, _______, KC_1,    KC_2,    KC_3,    _______, _______,  \
+  _______, _______, _______, _______, _______, _______, _______, KC_0,    KC_0,    _______, _______, _______  \
+)
+
+};
+
+void persistent_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    // case QWERTY:
+    //   if (record->event.pressed) {
+    //     persistent_default_layer_set(1UL<<_QWERTY);
+    //   }
+    //   return false;
+    //   break;
+    case QWERTY:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_DVORAK);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}

keyboards/planck/keymaps/dsanchezseco/config.h

@@ -0,0 +1,39 @@
+#pragma once
+
+#ifdef AUDIO_ENABLE
+    #define STARTUP_SONG SONG(PLANCK_SOUND)
+    // #define STARTUP_SONG SONG(NO_SOUND)
+
+    #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \
+                                  SONG(COLEMAK_SOUND), \
+                                  SONG(DVORAK_SOUND) \
+                                }
+#endif
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+
+#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 2
+
+// Most tactile encoders have detents every 4 stages
+#define ENCODER_RESOLUTION 4
+

keyboards/planck/keymaps/dsanchezseco/keymap.c

@@ -0,0 +1,116 @@
+/* Copyright 2015-2017 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+#include "muse.h"
+
+extern keymap_config_t keymap_config;
+
+enum planck_layers {
+  _DVORAK,
+  _LOWER,
+  _RAISE,
+  _ADJUST
+};
+
+enum planck_keycodes {
+  DVORAK,
+};
+
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Dvorak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  |  /   |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  -   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | Alt  | GUI  |Lower |    Space    | Bksp |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_DVORAK] = LAYOUT_planck_grid(
+    KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_SLSH,
+    KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINUS,
+    KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSFT,
+    KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC, KC_SPC,  KC_BSPC, RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | | Home | End  |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      | AltGr|      |      |             | Del  |      | Play | Vol- | Vol+ | Next |
+ * `-----------------------------------------------------------------------------------'
+ *          ^-- sticky
+ */
+[_LOWER] = LAYOUT_planck_grid(
+    KC_TILD, KC_EXLM,       KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR,    KC_ASTR,    KC_LPRN, KC_RPRN, KC_BSPC,
+    KC_DEL,  KC_F1,         KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS,    KC_PLUS,    KC_LCBR, KC_RCBR, KC_PIPE,
+    _______, KC_F7,         KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  S(KC_NUHS), S(KC_NUBS),    KC_HOME, KC_END,  KC_ENT,
+    _______, OSM(MOD_RALT), _______, _______, _______, _______, KC_DEL,  _______,    KC_MPLY,    KC_VOLD, KC_VOLU, KC_MNXT
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |Pg Up |Pg Dn |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      | AltGr|      |      |             | Del  |      | Play | Vol- | Vol+ | Next |
+ * `-----------------------------------------------------------------------------------'
+ *          ^-- sticky
+ */
+[_RAISE] = LAYOUT_planck_grid(
+    KC_GRV,  KC_1,          KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+    KC_DEL,  KC_F1,         KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+    _______, KC_F7,         KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, KC_ENT,
+    _______, OSM(MOD_RALT), _______, _______, _______, _______, KC_DEL,  _______, KC_MPLY, KC_VOLD, KC_VOLU, KC_MNXT
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------
+ * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |Aud on|Audoff|AGnorm|AGswap|      |      |      |      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = LAYOUT_planck_grid(
+    _______, RESET,   DEBUG,   RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD,  RGB_VAI, RGB_VAD, KC_DEL ,
+    _______, _______, MU_MOD,  AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, _______, _______,  _______, _______, _______,
+    _______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  TERM_ON, TERM_OFF, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______
+)
+
+};
+
+uint32_t layer_state_set_user(uint32_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}

keyboards/planck/keymaps/dsanchezseco/readme.md

@@ -0,0 +1,2 @@
+# The Default Planck Layout
+

keyboards/planck/keymaps/dsanchezseco/rules.mk

@@ -0,0 +1 @@
+

keyboards/planck/keymaps/msiu/config.h

@@ -0,0 +1,40 @@
+#pragma once
+
+
+#ifdef AUDIO_ENABLE
+    #define STARTUP_SONG SONG(PLANCK_SOUND)
+    // #define STARTUP_SONG SONG(NO_SOUND)
+
+    #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \
+                                  SONG(COLEMAK_SOUND), \
+                                  SONG(DVORAK_SOUND) \
+                                }
+#endif
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+
+#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 2
+
+// Most tactile encoders have detents every 4 stages
+#define ENCODER_RESOLUTION 4
+

keyboards/planck/keymaps/msiu/keymap.c

@@ -0,0 +1,208 @@
+#include QMK_KEYBOARD_H
+#include "muse.h"
+
+extern keymap_config_t keymap_config;
+
+enum planck_layers {
+  _QWERTY,
+  _DVORAK,
+  _LOWER,
+  _RAISE,
+  _NUMB,
+  _FUNC,
+  _ADJUST
+};
+
+enum planck_keycodes {
+  QWERTY = SAFE_RANGE,
+  DVORAK,
+  BACKLIT,
+  EXT_PLV
+};
+
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_QWERTY] = LAYOUT_planck_grid(
+  LT(_NUMB, KC_TAB),   KC_Q,    KC_W,    KC_E,    KC_R,  KC_T,      KC_Y,   KC_U,  KC_I,    KC_O,    KC_P,    KC_BSPC,
+  LCTL_T(KC_ESC),      KC_A,    KC_S,    KC_D,    KC_F,  KC_G,      KC_H,   KC_J,  KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+  KC_LSFT,             KC_Z,    KC_X,    KC_C,    KC_V,  KC_B,      KC_N,   KC_M,  KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,
+  KC_LCTL,             KC_HYPR, KC_LALT, KC_LGUI, LOWER, MO(_FUNC), KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+),
+
+[_DVORAK] = LAYOUT_planck_grid(
+  _______, KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,     KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    _______,
+  _______, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,     KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH,
+  _______, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,     KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    _______,
+  _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+),
+
+[_LOWER] = LAYOUT_planck_grid(
+  KC_TILD, KC_EXLM,  KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,
+  _______, KC_F1,    KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
+  _______, KC_F7,    KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PGDN, KC_PGUP, KC_HOME, KC_END , KC_MUTE,
+  _______, _______,  _______, _______, _______, _______, KC_MPLY, _______, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT
+),
+
+[_RAISE] = LAYOUT_planck_grid(
+  KC_GRV,  KC_1,    KC_2,    KC_3,   KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+  _______, KC_4,    KC_5,    KC_6,   KC_PLUS, KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+  _______, KC_7,    KC_8,    KC_9,   KC_MINS, KC_F11,  KC_F12,  KC_PGDN, KC_PGUP, KC_HOME, KC_END , KC_MUTE,
+  _______, _______, _______, _______, _______, _______, KC_MPLY, _______, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT
+),
+
+[_ADJUST] = LAYOUT_planck_grid(
+    _______, _______, DEBUG,   RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_DEL ,
+    _______, _______, MU_MOD,  AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  DVORAK,  _______, _______, _______,
+    _______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  TERM_ON, TERM_OFF,_______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET
+),
+
+[_FUNC] = LAYOUT_planck_grid(
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_UP,   _______, KC_PSCR, _______,
+  _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+),
+
+[_NUMB] = LAYOUT_planck_grid(
+  _______, _______, _______, _______, _______, _______, _______, KC_7,    KC_8,    KC_9,    _______, KC_BSPC,
+  _______, _______, _______, _______, _______, _______, _______, KC_4,    KC_5,    KC_6,    _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, KC_1,    KC_2,    KC_3,    _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, KC_0,    KC_0,    _______, _______, _______
+)
+
+
+};
+
+#ifdef AUDIO_ENABLE
+  float plover_song[][2]     = SONG(PLOVER_SOUND);
+  float plover_gb_song[][2]  = SONG(PLOVER_GOODBYE_SOUND);
+#endif
+
+uint32_t layer_state_set_user(uint32_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        print("mode just switched to qwerty and this is a huge string\n");
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_DVORAK);
+      }
+      return false;
+      break;
+    case BACKLIT:
+      if (record->event.pressed) {
+        register_code(KC_RSFT);
+        #ifdef BACKLIGHT_ENABLE
+          backlight_step();
+        #endif
+        #ifdef KEYBOARD_planck_rev5
+          PORTE &= ~(1<<6);
+        #endif
+      } else {
+        unregister_code(KC_RSFT);
+        #ifdef KEYBOARD_planck_rev5
+          PORTE |= (1<<6);
+        #endif
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+bool muse_mode = false;
+uint8_t last_muse_note = 0;
+uint16_t muse_counter = 0;
+uint8_t muse_offset = 70;
+uint16_t muse_tempo = 50;
+
+void encoder_update(bool clockwise) {
+  if (muse_mode) {
+    if (IS_LAYER_ON(_RAISE)) {
+      if (clockwise) {
+        muse_offset++;
+      } else {
+        muse_offset--;
+      }
+    } else {
+      if (clockwise) {
+        muse_tempo+=1;
+      } else {
+        muse_tempo-=1;
+      }
+    }
+  } else {
+    if (clockwise) {
+      register_code(KC_PGDN);
+      unregister_code(KC_PGDN);
+    } else {
+      register_code(KC_PGUP);
+      unregister_code(KC_PGUP);
+    }
+  }
+}
+
+void dip_update(uint8_t index, bool active) {
+  switch (index) {
+    case 0:
+      if (active) {
+        #ifdef AUDIO_ENABLE
+          PLAY_SONG(plover_song);
+        #endif
+        layer_on(_ADJUST);
+      } else {
+        #ifdef AUDIO_ENABLE
+          PLAY_SONG(plover_gb_song);
+        #endif
+        layer_off(_ADJUST);
+      }
+      break;
+    case 1:
+      if (active) {
+        muse_mode = true;
+      } else {
+        muse_mode = false;
+        #ifdef AUDIO_ENABLE
+          stop_all_notes();
+        #endif
+      }
+   }
+}
+
+void matrix_scan_user(void) {
+  #ifdef AUDIO_ENABLE
+    if (muse_mode) {
+      if (muse_counter == 0) {
+        uint8_t muse_note = muse_offset + SCALE[muse_clock_pulse()];
+        if (muse_note != last_muse_note) {
+          stop_note(compute_freq_for_midi_note(last_muse_note));
+          play_note(compute_freq_for_midi_note(muse_note), 0xF);
+          last_muse_note = muse_note;
+        }
+      }
+      muse_counter = (muse_counter + 1) % muse_tempo;
+    }
+  #endif
+}
+
+bool music_mask_user(uint16_t keycode) {
+  switch (keycode) {
+    case RAISE:
+    case LOWER:
+      return false;
+    default:
+      return true;
+  }
+}

keyboards/planck/keymaps/msiu/readme.md

@@ -0,0 +1,2 @@
+# The Default Planck Layout
+

keyboards/planck/keymaps/msiu/rules.mk

@@ -0,0 +1 @@
+SRC += muse.c

keyboards/planck/keymaps/piemod/README.md

@@ -17,10 +17,6 @@ A keymap for users that need:
 
 Still a work-in-progress. Suggestions welcome @ https://github.com/dwrz/piemod.
 
-### Keymap
-
-![PieMod Keymap](./keymap.png)
-
 ### TODO
 
 - [ ] Add Emacs layer.

keyboards/planck/keymaps/tom/keymap.c

@@ -21,21 +21,14 @@ extern keymap_config_t keymap_config;
 
 enum planck_layers {
   _QWERTY,
-  _COLEMAK,
-  _DVORAK,
   _LOWER,
   _RAISE,
-  _PLOVER,
   _ADJUST
 };
 
 enum planck_keycodes {
   QWERTY = SAFE_RANGE,
-  COLEMAK,
-  DVORAK,
-  PLOVER,
-  BACKLIT,
-  EXT_PLV
+  BACKLIT
 };
 
 #define LOWER MO(_LOWER)
@@ -110,7 +103,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * `-----------------------------------------------------------------------------------'
  */
 [_ADJUST] = LAYOUT_planck_grid(
-    _______, RESET,   DEBUG,   RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD,  RGB_VAI, RGB_VAD, KC_DEL ,
+    C(G(S(KC_4))), RESET, DEBUG, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_DEL,
     _______, _______, MU_MOD,  AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  _______,  _______, _______, _______,
     _______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  TERM_ON, TERM_OFF, _______, _______, _______,
     _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______
@@ -136,32 +129,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
       }
       return false;
       break;
-    case BACKLIT:
-      if (record->event.pressed) {
-        register_code(KC_RSFT);
-        #ifdef BACKLIGHT_ENABLE
-          backlight_step();
-        #endif
-        #ifdef KEYBOARD_planck_rev5
-          PORTE &= ~(1<<6);
-        #endif
-      } else {
-        unregister_code(KC_RSFT);
-        #ifdef KEYBOARD_planck_rev5
-          PORTE |= (1<<6);
-        #endif
-      }
-      return false;
-      break;
-    case EXT_PLV:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_SONG(plover_gb_song);
-        #endif
-        layer_off(_PLOVER);
-      }
-      return false;
-      break;
   }
   return true;
 }

keyboards/planck/keymaps/tom/readme.md

@@ -25,6 +25,10 @@ This layout is data-driven: I installed [WhatPulse](https://whatpulse.org/) a fe
 - map brightness up / down to original location of left and up arrows
 - map volume up / down to original location of down and right arrows
 
+### ADJUST
+
+- map to esc key: screenshot region to clipboard - an alias for ctrl + cmd + shift + 4
+
 
 ## RGB LED
 

keyboards/rama/koyu/config.h

@@ -0,0 +1,127 @@
+/* Copyright 2017 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "config_common.h"
+
+// USB Device descriptor parameter
+#define VENDOR_ID       0x5241 // "RW"
+#define PRODUCT_ID      0x4B59 // "KY"
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    RAMA.WORKS
+#define PRODUCT         RAMA KOYU
+#define DESCRIPTION     RAMA KOYU Keyboard
+
+
+
+// key matrix size
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+// KOYU PCB pin-out
+#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
+#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 }
+#define UNUSED_PINS
+
+// IS31FL3731 driver
+#define DRIVER_COUNT 2
+#define DRIVER_LED_TOTAL 72
+
+// COL2ROW or ROW2COL
+#define DIODE_DIRECTION COL2ROW
+
+// Set 0 if debouncing isn't needed
+#define DEBOUNCING_DELAY 5
+
+// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
+#define LOCKING_SUPPORT_ENABLE
+// Locking resynchronize hack
+#define LOCKING_RESYNC_ENABLE
+
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+// disable debug print
+//#define NO_DEBUG
+
+// disable print
+//#define NO_PRINT
+
+// disable action features
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#define RGB_BACKLIGHT_ENABLED 1
+
+// This conditionally compiles the backlight code for KOYU specifics
+#define RGB_BACKLIGHT_KOYU
+
+// enable/disable LEDs based on layout
+// they aren't really used if RGB_BACKLIGHT_M60_A defined
+#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 1
+#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
+#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 1
+#define RGB_BACKLIGHT_USE_7U_SPACEBAR 1
+#define RGB_BACKLIGHT_USE_ISO_ENTER 0
+#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 1
+
+// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
+#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
+
+// disable backlight after timeout in minutes, 0 = no timeout
+#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
+
+// the default effect (RGB test)
+#define RGB_BACKLIGHT_EFFECT 255
+
+// These define which keys in the matrix are alphas/mods
+// Used for backlight effects so colors are different for
+// alphas vs. mods
+// Each value is for a row, bit 0 is column 0
+// Alpha=0 Mod=1
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0110000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0110000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0111000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0111000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0111100000000111
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
+
+// EEPROM usage
+
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x08
+#define EEPROM_VERSION_ADDR 34
+
+// Backlight config starts after EEPROM version
+#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35
+// Dynamic keymap starts after backlight config (35+31)
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 66
+// Dynamic macro starts after dynamic keymaps (66+(4*5*15*2)) = (66+600)
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 666
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 358
+#define DYNAMIC_KEYMAP_MACRO_COUNT 16

keyboards/rama/koyu/info.json

@@ -0,0 +1,13 @@
+{
+    "keyboard_name": "KOYU", 
+    "url": "", 
+    "maintainer": "Wilba", 
+    "bootloader": "DFU", 
+    "width": 16, 
+    "height": 5, 
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"PrtSc", "x":13, "y":0}, {"label":"Pause", "x":14, "y":0}, {"label":"Num Lock", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Insert", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Home", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"/", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Ctrl", "x":11, "y":4, "w":1.5}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}]
+        }
+    }
+}

keyboards/rama/koyu/keymaps/default/keymap.c

@@ -0,0 +1,36 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	// Default layer
+	[0] = LAYOUT_all(
+		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL,  KC_HOME,
+		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,          KC_PGUP,
+		KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                    KC_PGDN,
+		KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,                   KC_UP,   KC_END,
+		MO(1),   KC_LGUI, KC_LALT,                            KC_SPC,                                      MO(2),            KC_LEFT, KC_DOWN, KC_RGHT),
+
+	// Fn1 Layer
+	[1] = LAYOUT_all(
+		KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_INS,  KC_DEL,  KC_TRNS,
+		KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
+		KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                                     KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
+
+	// Fn2 Layer
+	[2] = LAYOUT_all(
+		KC_TRNS, EF_DEC,  EF_INC,  H1_DEC,  H1_INC,  H2_DEC,  H2_INC,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC,  BR_INC,  KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC,  S1_INC,  S2_DEC,  S2_INC,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, ES_DEC,  ES_INC,  KC_TRNS,          KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                                     KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
+
+	// Fn3 Layer
+	[3] = LAYOUT_all(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                                     KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
+};

keyboards/rama/koyu/koyu.c

@@ -0,0 +1,18 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef RGB_BACKLIGHT_KOYU
+#error RGB_BACKLIGHT_KOYU not defined, you done goofed somehao, brah
+#endif

keyboards/rama/koyu/koyu.h

@@ -0,0 +1,42 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+#include "../../zeal60/rgb_backlight_keycodes.h"
+#include "../../zeal60/zeal60_keycodes.h"
+
+#define ____ KC_NO
+
+// Right switch of split backspace is at 2,13 and is the only switch
+// whose physical position doesn't match switch matrix position :-(
+// However, it also makes no sense to view the physical as 16 columns,
+// so the numbering goes 00 to 14. Deal with it.
+
+#define LAYOUT_all( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K213, K014, \
+    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113,       K114, \
+    K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,             K214, \
+    K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,             K313, K314, \
+    K400, K401, K402,                   K407,                         K411,       K412, K413, K414  \
+) { \
+    { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \
+    { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \
+    { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 }, \
+    { K300, ____, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \
+    { K400, K401, K402, ____, ____, ____, ____, K407, ____, ____, ____, K411, K412, K413, K414 }  \
+}

keyboards/rama/koyu/readme.md

@@ -0,0 +1,23 @@
+# RAMA KOYU
+
+![RAMA KOYU](https://static1.squarespace.com/static/563c788ae4b099120ae219e2/t/5b8bd6e6b8a045c95eac2003/1535891375794/RW-KOYU-A-RENDER-04-TOP.1335.jpg?format=1500w)
+
+The <20>wait<69> for something isn<73>t the most conscious desire, but that anticipation creates nostalgia.   
+
+At Rama Works, you<6F>ve embraced this. From updates of the blog, to direct communication with the community, being part of a Rama Works product doesn<73>t just start when you receive it. If you<6F>ve ever received a Rama Works product, you know that no detail is overlooked.   
+
+Let us take you on a journey that will capture that sensory experience, and explore the gravitational interaction between aesthetic and design. The Rama Works <20>X<EFBFBD> element personifies the understanding that taking something away doesn<73>t necessarily make it less.   
+
+This is the sound of Rama Works. Never too busy<73>a feeling of delightful modern weightlessness. A rich sonic experience. Sparse and ethereal, this music boldly inhabits a nondescript, borderless space. Warm, synthetic textures, bespoke musical sound design. percussive elements percolating and accentuating movement on the screen and in the stereo field. a sonic palette full of clicks, taps and resonances evoking a sense of calm comfort and familiarity.   
+
+[More info at RAMA WORKS](https://rama.works/koyu/)
+
+Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)  
+Hardware Supported: RAMA KOYU PCB  
+Hardware Availability: [RAMA WORKS Store](https://ramaworks.store/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make rama/koyu:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/rama/koyu/rules.mk

@@ -0,0 +1,80 @@
+
+
+# project specific files
+SRC =	keyboards/zeal60/zeal60.c \
+		keyboards/zeal60/rgb_backlight.c \
+		quantum/color.c \
+		drivers/issi/is31fl3731.c \
+		drivers/avr/i2c_master.c
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Boot Section
+BOOTLOADER = atmel-dfu
+
+# Do not put the microcontroller into power saving mode
+# when we get USB suspend event. We want it to keep updating
+# backlight effects.
+OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes
+CIE1931_CURVE = yes
+
+#LAYOUTS = ???

keyboards/readme.md

@@ -35,7 +35,7 @@ These keyboards are part of the QMK repository, but their manufacturers are not
 * [9key](/keyboards/9key) — A 9-key minipad sold by Bishop Keyboards.
 * [Alps64](/keyboards/alps64) — A 60% keyboard for Alps keyswitches.
 * [AMJ60](/keyboards/amj60) — DIY/Assembled compact 60% keyboard.
-* [Arrow Pad](/keyboards/arrow_pad) — A custom creation by IBNobody.
+* [Arrow Pad](/keyboards/handwired/arrow_pad) — A custom creation by IBNobody.
 * [Atreus](/keyboards/atreus) — Made by Technomancy.
 * [Bantam44](/keyboards/bantam44) — It is a 44-key 40% staggered keyboard.
 * [DataHand](/keyboards/handwired/datahand) — DataHand keyboard converted to use a Teensy board.
@@ -53,7 +53,7 @@ These keyboards are part of the QMK repository, but their manufacturers are not
 * [The Kitten Paw](/keyboards/kitten_paw) — A replacement controller (2016 revision) for the Filco Majestouch by [Bathroom Epiphanies](https://github.com/BathroomEpiphanies).
 * [Lets Split](/keyboards/lets_split) - Split ortholinear 40% keyboard.
 * [Phantom](/keyboards/phantom) — A tenkeyless kit by Teel, also from Geekhack.
-* [Retro Refit](/keyboards/retro_refit) — Another creation by IBNobody.
+* [Retro Refit](/keyboards/handwired/retro_refit) — Another creation by IBNobody.
 * [S60-x](/keyboards/s60_x) — DIY compact keyboard designed by VinnyCordeiro for Sentraq.
 * [Satan](/keyboards/satan) — A GH60 variant.
 * [SixKeyBoard](/keyboards/sixkeyboard) — A 6-key keyboard made by TechKeys.

keyboards/westfoxtrot/cypher/keymaps/kwer/config.h

@@ -0,0 +1,33 @@
+/* Copyright 2018 westfoxtrot
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define RGB_DI_PIN F7
+#ifdef  RGB_DI_PIN
+  #define RGBLED_NUM 15
+  #define RGBLIGHT_HUE_STEP 8
+  #define RGBLIGHT_SAT_STEP 8
+  #define RGBLIGHT_VAL_STEP 15
+  #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+  #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+  #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+  #define RGBLIGHT_EFFECT_KNIGHT
+  #define RGBLIGHT_EFFECT_KNIGHT_LENGTH 5
+  #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+ #endif
+
+// place overrides here

keyboards/westfoxtrot/cypher/keymaps/kwer/keymap.c

@@ -0,0 +1,79 @@
+/* Copyright 2018 westfoxtrot
+ * Copyright 2019 kwerdenker
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+#include "keymap_german.h"
+
+#define _DL 0
+#define _FN 1
+#define _LE 2
+
+#define SPECIAL LT(_FN, DE_CIRC)    //capslock layer switch + stargate key on tap
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_DL] = LAYOUT_iso (
+      KC_ESC,  KC_1,    KC_2,  KC_3,  KC_4,  KC_5,  KC_6,  KC_7,  KC_8,  KC_9,    KC_0,   DE_SS,   DE_ACUT, KC_BSPC, _______,     KC_NLCK, KC_PSCR,KC_PSLS,KC_PAST,
+      KC_TAB,  KC_Q,    KC_W,  KC_E,  KC_R,  KC_T,  DE_Z,  KC_U,  KC_I,  KC_O,    KC_P,   DE_UE,   DE_PLUS,                       KC_P7,   KC_P8,  KC_P9,  KC_PMNS,
+      SPECIAL, KC_A,    KC_S,  KC_D,  KC_F,  KC_G,  KC_H,  KC_J,  KC_K,  KC_L,    DE_OE,  DE_AE,   DE_HASH, KC_ENT,               KC_P4,   KC_P5,  KC_P6,  KC_PPLS,
+      KC_LSFT, DE_LESS, DE_Y,  KC_X,  KC_C,  KC_V,  KC_B,  KC_N,  KC_M,  KC_COMM, KC_DOT, DE_MINS, KC_RSFT,        KC_UP,         KC_P1,   KC_P2,  KC_P3,  KC_PENT,
+      KC_LCTL, _______, KC_LALT,             KC_SPC,                     _______, KC_RALT, TG(_LE),       KC_LEFT, KC_DOWN, KC_RGHT,        KC_P0,  KC_PDOT, KC_NO
+  ),
+
+  [_FN] = LAYOUT_iso (
+      DE_RING, KC_F1,   KC_F2,   KC_F3,   KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,  KC_F11,  KC_F12,  KC_DEL, _______,      _______, _______, _______, _______,
+      _______, _______, KC_UP,   _______, _______,  _______,  _______,  _______,  _______,  _______,  _______, _______, _______,                        _______, _______, _______, _______,
+      _______, KC_LEFT, KC_DOWN, KC_RGHT, _______,  _______,  _______,  _______,  _______,  _______,  _______, _______, _______, _______,               _______, _______, _______, _______,
+      _______, _______, _______, _______, _______,  _______,  _______,  _______,  _______,  _______,  _______, _______, _______, _______,               _______, _______, _______, _______,
+      _______, _______, _______,             KC_LGUI,                _______, _______, _______,                         _______, _______, _______,               _______, _______, _______
+  ),
+
+  [_LE] = LAYOUT_iso (
+      _______, _______, _______, _______, _______,  _______,  _______,  _______,  _______,  _______,  _______, _______, _______, _______, _______,      _______, _______, _______, RESET,
+      _______, _______, _______, _______, _______,  _______,  _______,  _______,  _______,  _______,  _______, _______, _______,                        RGB_TOG, RGB_MOD, RGB_RMOD,_______,
+      _______, _______, _______, _______, _______,  _______,  _______,  _______,  _______,  _______,  _______, _______, _______, _______,               RGB_HUI, RGB_SAI, RGB_VAI, _______,
+      _______, _______, _______, _______, _______,  _______,  _______,  _______,  _______,  _______,  _______, _______, _______, _______,               RGB_HUD, RGB_SAD, RGB_VAD, _______,
+      _______, _______, _______,             _______,                _______, _______, _______,                         _______, _______, _______,               _______, _______, _______
+  ),
+};
+
+
+
+void matrix_init_user(void) {
+  //user initialization
+}
+
+void matrix_scan_user(void) {
+  //user matrix
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+  // Insert custom handling for CAPS_LOCK, NUM_LOCK, SCROLL_LOCK here
+      if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
+        writePinHigh(F4);
+        writePinHigh(F1);
+        writePinHigh(F5);
+    } else {
+        writePinLow(F4);
+        writePinLow(F1);
+        writePinLow(F5);
+    }
+}

keyboards/westfoxtrot/cypher/keymaps/kwer/readme.md

@@ -0,0 +1,39 @@
+# The kwer keymap and RGB MOD for cypher
+
+![](https://i.imgur.com/b7snIju.jpg)
+
+## Hardware
+To make this mod, all you need a piece of WS2812b RGB strip (I used one with 144 LEDs per meter, so it's rather dense), some wiring (I used 0.6mm solid core wire) and steady hands for soldering to the MCU pin.
+
+**Installed mod**
+![](https://i.imgur.com/IKcFd0k.jpg)
+
+As you can see, the wiring is relatively simple. VCC and GND can be easily accessed through the ISP header on the right side of the spacebar while the DATA line can be routed relatively easy through one of the stabilizer holes. While it isn't important where exactly you solder the VCC/GND wires to their respective lines on the strip, you have to keep the direction of the data line in mind. Most strip have arrows printed on them to show you in which direction the data is shifted through the LEDs and your should always solder your DATA line on the _from_ side, as seen in the above picture.
+
+**Close-up for the VCC/GND connections**
+![](https://i.imgur.com/K0OibwW.jpg)
+
+Since there is no pinout availble for the pin we're gonna use to control the strip, the line has to be soldered to the MCU directly. While this is not a very complex process, you should have a fine tipped soldering irong and a steady hand. Make sure you do not bridge any of the neighboring pins when soldering the wire to the MCU pin. As shown in the picture below, you want to connect the DATA line to the third pin from the right on the top of the controller chip.
+
+**Close-up for the DATA connection**
+![](https://i.imgur.com/zkD3RjF.jpg)
+
+## Software
+To enable your RGB strip in QMK, you have to add change/add the following lines
+
+**rules.​mk**
+```
+[...]
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+[...]
+```
+
+**config.h**
+```
+[...]
+#define RGB_DI_PIN F7
+#define RGBLED_NUM 15        // Change this number to the amount of LEDs on the strip you soldered
+#define RGBLIGHT_ANIMATIONS
+[...]
+```
+To control the RGB color, animation, etc. you need to add the appropriate keycodes to your keymap. Either see [my keymap](./keymap.c) or the [official QMK documentation](https://docs.qmk.fm/#/feature_rgblight?id=keycodes) for references.

keyboards/westfoxtrot/cypher/keymaps/kwer/rules.mk

@@ -0,0 +1,2 @@
+# Build options override
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow

keyboards/xd75/keymaps/msiu/config.h

@@ -0,0 +1,18 @@
+/* Copyright 2017 Benjamin Kesselring
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+// place overrides here

keyboards/xd75/keymaps/msiu/keymap.c

@@ -0,0 +1,120 @@
+/* Copyright 2017 Benjamin Kesselring
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* What this layout is: QWERTY layout with the standard 40% layers. For easy
+ * switching between my xd75 and contra
+ */
+
+#include QMK_KEYBOARD_H
+
+// Layer shorthand
+#define _QW 0
+#define _DV 1
+#define _LW 2
+#define _RS 3
+#define _FN 4
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* QWERTY
+ * .--------------------------------------------------------------------------------------------------------------------------------------.
+ * | `      | 1      | 2      | 3      | 4      | 5      | -      | =      | \      | 6      | 7      | 8      | 9      | 0      | BACKSP |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | TAB    | Q      | W      | E      | R      | T      | 7      | 8      | 9      | Y      | U      | I      | O      | P      | BACKSP |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | ESC    | A      | S      | D      | F      | G      | 4      | 5      | 6      | H      | J      | K      | L      | ;      | '      |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | LSHIFT | Z      | X      | C      | V      | B      | 1      | 2      | 3      | N      | M      | ,      | .      | /      | ENTER  |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------+--------|
+ * | LCTRL  | HYPER  | LALT   | LGUI   | LOWER  | FN     | 0      |        | .      | SPACE  | RAISE  | LEFT   | DOWN   | UP     | RIGHT  |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
+ [_QW] = { /* QWERTY */
+  { KC_GRV,          KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_PLUS, KC_MINS, KC_ASTR, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC  },
+  { KC_TAB,          KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_7,    KC_8,    KC_9   , KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_DEL   },
+  { LCTL_T(KC_ESC),  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_4,    KC_5,    KC_6   , KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT  },
+  { KC_LSFT,         KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_1,    KC_2,    KC_3   , KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT   },
+  { KC_LCTL,         KC_HYPR, KC_LALT, KC_LGUI, MO(_LW), MO(_FN), KC_0,    _______, KC_DOT , KC_SPC,  MO(_RS), KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT  },
+ },
+
+ /* Dvorak */
+
+  [_DV] = { /* Dvorak */
+   { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______  },
+   { _______, KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    _______, _______, _______, KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    _______  },
+   { _______, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    _______, _______, _______, KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH  },
+   { _______, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    _______, _______, _______, KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    _______  },
+   { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______  },
+  },
+
+
+/* LOWERED
+ * .--------------------------------------------------------------------------------------------------------------------------------------.
+ * |        | F1     | F2     | F3     | F4     | F5     |        |        |        | F6     | F7     | F8     | F9     | F10    | DEL    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | ~      | !      | @      | #      | $      | %      |        | VOLU   |        | ^      | &      | *      | (      | )      | DEL    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        | F1     | F2     | F3     | F4     | F5     | PREV   | PLAY   | NEXT   | F6     | _      | +      | {      | }      | |      |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------+--------|
+ * |        | F7     | F8     | F9     | F10    | F11    |        | VOLD   |        | F12    | PAGEDW | PAGEUP | HOME   | END    | MUTE   |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------+--------|
+ * |        |        |        |        |        |        |        | MUTE   |        | PLAY   |        | PREV   | VOLD   | VOLU   | NEXT   |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
+ [_LW] = { /* LOWERED */
+  { _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   _______, _______, _______, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_DEL   },
+  { KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, _______, KC_VOLU, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL    },
+  { _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_MPRV, KC_MPLY, KC_MNXT, KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE   },
+  { _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, KC_VOLD, _______, KC_F12,  KC_PGDN, KC_PGUP, KC_HOME, KC_END , KC_MUTE   },
+  { _______, _______, _______, _______, _______, _______, _______, KC_MUTE, _______, KC_MPLY, _______, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT   },
+ },
+
+/* RAISED
+ * .--------------------------------------------------------------------------------------------------------------------------------------.
+ * |        | F1     | F2     | F3     | F4     | F5     |        |        |        | F6     | F7     | F8     | F9     | F10    | DEL    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | `      | 1      | 2      | 3      | 4      | 5      |        | VOLU   |        | 6      | 7      | 8      | 9      | 0      |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        | F1     | F2     | F3     | F4     | F5     | PREV   | PLAY   | NEXT   | F6     | -      | =      | [      | ]      | \      |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        | F7     | F8     | F9     | F10    | F11    |        | VOLD   |        | F12    | PAGEUP | PAGEDW | HOME   | END    | MUTE   |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        |        |        |        |        |        |        | MUTE   |        | PLAY   |        | PREV   | VOLD   | VOLU   | NEXT   |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
+ [_RS] = { /* RAISED */
+  { _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   _______, _______, _______, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_DEL    },
+  { KC_GRV , KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    _______, KC_VOLU, _______, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL    },
+  { _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_MPRV, KC_MPLY, KC_MNXT, KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS   },
+  { _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, KC_VOLD, _______, KC_F12,  KC_PGDN, KC_PGUP, KC_HOME, KC_END , KC_MUTE   },
+  { _______, _______, _______, _______, _______, _______, _______, KC_MUTE, _______, KC_MPLY, _______, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT   },
+ },
+
+/* FUNCTION */
+
+ [_FN] = { /* FUNCTION */
+  { RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, BL_TOGG, BL_INC,  BL_DEC,  _______, _______, _______, _______  },
+  { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP  , _______, KC_PSCR, _______  },
+  { _______, _______, _______, TO(_DV), TO(_QW), _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______  },
+  { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______  },
+  { RESET  , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______  },
+ },
+};
+
+

keyboards/xd75/keymaps/msiu/readme.md

@@ -0,0 +1 @@
+# The default keymap for xd75

layouts/community/60_ansi/stanrc85-ansi/keymap.c

@@ -35,7 +35,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		KC_TILD, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
 		_______, _______, CA_QUOT, KC_VOLU, CA_SCLN, _______, _______, KC_HOME, KC_UP,   KC_END,  _______, _______, _______, KC_INS,
 		KC_CAPS, _______, KC_MUTE, KC_VOLD, KC_MPLY, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______,
-		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+		_______, KC_RDP,  _______, _______, _______, _______, _______, _______, KC_WBAK, KC_WFWD, _______, _______,
 		_______, _______, _______,                   _______,                   _______, _______, _______, _______),
 
 	[3] = LAYOUT_60_ansi(

layouts/community/ergodox/dvorak_spanish/readme.md

@@ -1,5 +1,4 @@
 # Ergodox Spanish Dvorak Layout
- * See spanish dvorak layout [here](http://djelibeibi.unex.es/dvorak/)
  * Software layout must be set to SPANISH QWERTY to work properly
 
 ## Keymap Layers

layouts/community/ergodox/osx_de/readme.md

@@ -1,4 +1,4 @@
-#Ergodox EZ für OSX 
+# Ergodox EZ für OSX 
 
 Dies ist nur ein kleiner Tweak der bestehenden firmware für das ErgoDox-EZ-Keyboard. Leider passte das layout nicht wirklich für OSX, deswegen habe ich einige Anpassungen gemacht. Dabei wurden folgende features umgesetzt:
 
@@ -14,7 +14,6 @@ Dies ist nur ein kleiner Tweak der bestehenden firmware für das ErgoDox-EZ-Keyb
 # Erstellt Mit Dem ErgodoxLayoutGenerator
 
 Der ErgodoxLayoutGenerator ist ein kleines Werkzeug, welches die Erstellung und Pflege der eigenen Keymaps erleichtern soll. Es ist in java geschrieben und kann [hier](https://github.com/sboesebeck/ErgodoxLayoutGenerator/releases) heruntergeladen werden. Damit das Tool funktioniert sollte das offizielle Oracle JDK in aktueller Version installiert sein.
-Die Dokumentation für den ELG kann man [hier](https://boesebeck.name/2016/04/16/ergodoxlayoutgenerator-documentation/) nachlesen (momentan leider nur in Englisch verfügbar).
 
 
 

layouts/community/ergodox/osx_de_experimental/readme.md

@@ -8,7 +8,6 @@ dieses layout ist experimentell und wird im Lufe der Zeit viele Änderungen und
 # Erstellt Mit Dem ErgodoxLayoutGenerator
 
 Der ErgodoxLayoutGenerator (ELG) ist ein kleines Werkzeug, welches die Erstellung und Pflege der eigenen Keymaps erleichtern soll. Es ist in java geschrieben und kann [hier](https://github.com/sboesebeck/ErgodoxLayoutGenerator/releases) heruntergeladen werden. Damit das Tool funktioniert sollte das offizielle Oracle JDK in aktueller Version installiert sein.
-Die Dokumentation für den ELG kann man [hier](https://boesebeck.name/2016/04/16/ergodoxlayoutgenerator-documentation/) nachlesen (momentan leider nur in Englisch verfügbar).
 ---------------------------------------------------------------------------------------------------------------------
 
 # Ergodox and Ergodox-EZ experimental layout

layouts/community/ergodox/teckinesis/readme.md

@@ -1,6 +1,6 @@
 # teckinesis Layout
 
-*A blend of TECK and Kinesis layouts, based on ["The Ordinary Layout" by Nicholas Keene](http://qmk.fm/keyboards/ergodox_ez/keymaps/ordinary/#the-ordinary-layout-a-familiar-and-powerful-layout)*
+*A blend of TECK and Kinesis layouts, based on ["The Ordinary Layout" by Nicholas Keene](/layouts/community/ergodox/ordinary)*
 
 I love "The Ordinary Layout", but I still use a [TECK](https://www.trulyergonomic.com/store/index.php)
 at the office, and I found the transition back and forth to be a bit more difficult than I expected.

layouts/community/ergodox/tm2030/readme.md

@@ -55,7 +55,7 @@ As on the original TM 2030, when `num` layer is activated, holding `fn` disables
 ## Dvorak Layer
 Same as Layer 0 but with _Dvorak_ layout, to use with QWERTY OS layout.
 
-Enable Dvorak layout with [`Magic`](/TMK_readme.md#magic-commands)+`1` (`LShift`+`RShift`+`1`), disable with `Magic`-`0`.
+Enable Dvorak layout with [`Magic`](/docs/feature_bootmagic.md)+`1` (`LShift`+`RShift`+`1`), disable with `Magic`-`0`.
 
 The middle (green) led indicates when the Dvorak layer is activated.
 

message.mk

@@ -80,3 +80,4 @@ MSG_CHECK_FILESIZE = Checking file size of $(TARGET).hex
 MSG_FILE_TOO_BIG = $(ERROR_COLOR)The firmware is too large!$(NO_COLOR) $(CURRENT_SIZE)/$(MAX_SIZE) ($(OVER_SIZE) bytes over)\n
 MSG_FILE_TOO_SMALL = The firmware is too small! $(CURRENT_SIZE)/$(MAX_SIZE)\n
 MSG_FILE_JUST_RIGHT = The firmware size is fine - $(CURRENT_SIZE)/$(MAX_SIZE) ($(FREE_SIZE) bytes free)\n
+MSG_FILE_NEAR_LIMIT = The firmware size is approaching the maximum - $(CURRENT_SIZE)/$(MAX_SIZE) ($(FREE_SIZE) bytes free)\n

quantum/visualizer/readme.md

@@ -1,7 +1,7 @@
 # A visualization library for the TMK keyboard firmware
 
 This library is designed to work together with the [TMK keyboard firmware](https://github.com/tmk/tmk_keyboard). Currently it only works for [Chibios](http://www.chibios.org/)
- flavors, but it would be possible to add support for other configurations as well. The LCD display functionality is provided by the [uGFX library](http://www.ugfx.org/). 
+ flavors, but it would be possible to add support for other configurations as well. The LCD display functionality is provided by the [uGFX library](https://ugfx.io/). 
 
 ## To use this library as a user
 You can and should modify the visualizer\_user.c file. Check the comments in the file for more information.

tmk_core/rules.mk

@@ -383,6 +383,8 @@ show_path:
 	@echo OBJ=$(OBJ)
 
 ifeq ($(findstring avr-gcc,$(CC)),avr-gcc)
+SIZE_MARGIN = 1024
+
 check-size:
 	$(eval MAX_SIZE=$(shell n=`$(CC) -E -mmcu=$(MCU) $(CFLAGS) $(OPT_DEFS) tmk_core/common/avr/bootloader_size.c 2> /dev/null | sed -ne '/^#/n;/^AVR_SIZE:/,$${s/^AVR_SIZE: //;p;}'` && echo $$(($$n)) || echo 0))
 	$(eval CURRENT_SIZE=$(shell if [ -f $(BUILD_DIR)/$(TARGET).hex ]; then $(SIZE) --target=$(FORMAT) $(BUILD_DIR)/$(TARGET).hex | $(AWK) 'NR==2 {print $$4}'; else printf 0; fi))
@@ -390,7 +392,15 @@ check-size:
 	$(eval OVER_SIZE=$(shell expr $(CURRENT_SIZE) - $(MAX_SIZE)))
 	if [ $(MAX_SIZE) -gt 0 ] && [ $(CURRENT_SIZE) -gt 0 ]; then \
 		$(SILENT) || printf "$(MSG_CHECK_FILESIZE)" | $(AWK_CMD); \
-		if [ $(CURRENT_SIZE) -gt $(MAX_SIZE) ]; then printf "\n * $(MSG_FILE_TOO_BIG)"; $(PRINT_ERROR_PLAIN); else $(PRINT_OK); $(SILENT) || printf " * $(MSG_FILE_JUST_RIGHT)";  fi \
+		if [ $(CURRENT_SIZE) -gt $(MAX_SIZE) ]; then \
+		    printf "\n * $(MSG_FILE_TOO_BIG)"; $(PRINT_ERROR_PLAIN); \
+		else \
+		    if [ $(FREE_SIZE) -lt $(SIZE_MARGIN) ]; then \
+			$(PRINT_WARNING_PLAIN); printf " * $(MSG_FILE_NEAR_LIMIT)"; \
+		    else \
+			$(PRINT_OK); $(SILENT) || printf " * $(MSG_FILE_JUST_RIGHT)"; \
+		    fi \
+		fi \
 	fi
 else
 check-size:

users/stanrc85/stanrc85.c

@@ -79,6 +79,17 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
       }
     return false;
     break;
+  case KC_RDP: //Opens Windows RDP
+    if (!record->event.pressed) {
+      register_code(KC_LGUI);
+      tap_code(KC_R);
+      unregister_code(KC_LGUI);
+      wait_ms(200);
+      send_string_with_delay_P(PSTR("mstsc"), 10);
+      send_string_with_delay_P(PSTR(SS_TAP(X_ENTER)), 10);
+    }
+    return false;
+    break;
   }
   return process_record_keymap(keycode, record);
 }

users/stanrc85/stanrc85.h

@@ -20,7 +20,8 @@
 #define TD_TCTL TD(TD_RCTL)
 
 enum cust_keys {
-	KC_MAKE = SAFE_RANGE
+	KC_MAKE = SAFE_RANGE,
+  KC_RDP
 };
 
 enum tap_dance {

util/docker_build.sh

@@ -47,4 +47,4 @@ dir=$(pwd -W 2>/dev/null) || dir=$PWD  # Use Windows path if on Windows
 
 # Run container and build firmware
 docker run --rm -it $usb_args -v "$dir":/qmk_firmware qmkfm/qmk_firmware \
-	make "$keyboard${keymap:+:$keymap}${target:+:$target}"
+	/bin/bash -c "make git-submodule; make \"$keyboard${keymap:+:$keymap}${target:+:$target}\""