(OLED) Added support for CR (#6399)

Currently OLED Dirver only supports LF (\n) character in a string to clear out the rest of the current line and advance to the next line for writing. This PR adds support for CR (\r) character as well to advance to the next line, however not clear out the rest of the current line. This is extremely useful when you want to display a multi-line logo using a single array without wiping out exiting lines and flagging the OLED as dirty unnecessarily.

docs/feature_tap_dance.md

@@ -1,22 +1,33 @@
 # Tap Dance: A Single Key Can Do 3, 5, or 100 Different Things
 
-<!-- FIXME: Break this up into multiple sections -->
-
+## Introduction
 Hit the semicolon key once, send a semicolon. Hit it twice, rapidly -- send a colon. Hit it three times, and your keyboard's LEDs do a wild dance. That's just one example of what Tap Dance can do. It's one of the nicest community-contributed features in the firmware, conceived and created by [algernon](https://github.com/algernon) in [#451](https://github.com/qmk/qmk_firmware/pull/451). Here's how algernon describes the feature:
 
 With this feature one can specify keys that behave differently, based on the amount of times they have been tapped, and when interrupted, they get handled before the interrupter.
 
-To make it clear how this is different from `ACTION_FUNCTION_TAP`, let's explore a certain setup! We want one key to send `Space` on single tap, but `Enter` on double-tap.
+## Explanatory Comparison with `ACTION_FUNCTION_TAP`
+`ACTION_FUNCTION_TAP` can offer similar functionality to Tap Dance, but it's worth noting some important differences. To do this, let's explore a certain setup! We want one key to send `Space` on single-tap, but `Enter` on double-tap.
 
-With `ACTION_FUNCTION_TAP`, it is quite a rain-dance to set this up, and has the problem that when the sequence is interrupted, the interrupting key will be sent first. Thus, `SPC a` will result in `a SPC` being sent, if they are typed within `TAPPING_TERM`. With the tap dance feature, that'll come out as `SPC a`, correctly.
+With `ACTION_FUNCTION_TAP`, it is quite a rain-dance to set this up, and has the problem that when the sequence is interrupted, the interrupting key will be sent first. Thus, `SPC a` will result in `a SPC` being sent, if `SPC` and `a` are both typed within `TAPPING_TERM`. With the Tap Dance feature, that'll come out correctly as `SPC a` (even if both `SPC` and `a` are typed within the `TAPPING_TERM`.
 
-The implementation hooks into two parts of the system, to achieve this: into `process_record_quantum()`, and the matrix scan. We need the latter to be able to time out a tap sequence even when a key is not being pressed, so `SPC` alone will time out and register after `TAPPING_TERM` time.
+To achieve this correct handling of interrupts, the implementation of Tap Dance hooks into two parts of the system: `process_record_quantum()`, and the matrix scan. These two parts are explained below, but for now the point to note is that we need the latter to be able to time out a tap sequence even when a key is not being pressed. That way, `SPC` alone will time out and register after `TAPPING_TERM` time.
 
-But lets start with how to use it, first!
+## How to Use Tap Dance
+But enough of the generalities; lets look at how to actually use Tap Dance!
 
-First, you will need `TAP_DANCE_ENABLE=yes` in your `rules.mk`, because the feature is disabled by default. This adds a little less than 1k to the firmware size. Next, you will want to define some tap-dance keys, which is easiest to do with the `TD()` macro, that - similar to `F()`, takes a number, which will later be used as an index into the `tap_dance_actions` array.
+First, you will need `TAP_DANCE_ENABLE=yes` in your `rules.mk`, because the feature is disabled by default. This adds a little less than 1k to the firmware size. 
 
-This array specifies what actions shall be taken when a tap-dance key is in action. Currently, there are five possible options:
+Optionally, you might want to set a custom `TAPPING_TERM` time by adding something like this in you `config.h`:
+
+```
+#define TAPPING_TERM 175
+```
+
+The `TAPPING_TERM` time is the maximum time allowed between taps of your Tap Dance key, and is measured in milliseconds. For example, if you used the above `#define` statement and set up a Tap Dance key that sends `Space` on single-tap and `Enter` on double-tap, then this key will send `ENT` only if you tap this key twice in less than 175ms. If you tap the key, wait more than 175ms, and tap the key again you'll end up sending `SPC SPC` instead. 
+
+Next, you will want to define some tap-dance keys, which is easiest to do with the `TD()` macro, that - similar to `F()` - takes a number, which will later be used as an index into the `tap_dance_actions` array. 
+
+After this, you'll want to use the `tap_dance_actions` array to specify what actions shall be taken when a tap-dance key is in action. Currently, there are five possible options:
 
 * `ACTION_TAP_DANCE_DOUBLE(kc1, kc2)`: Sends the `kc1` keycode when tapped once, `kc2` otherwise. When the key is held, the appropriate keycode is registered: `kc1` when pressed and held, `kc2` when tapped once, then pressed and held.
 * `ACTION_TAP_DANCE_DUAL_ROLE(kc, layer)`: Sends the `kc` keycode when tapped once, or moves to `layer`. (this functions like the `TO` layer keycode).
@@ -24,17 +35,22 @@ This array specifies what actions shall be taken when a tap-dance key is in acti
 * `ACTION_TAP_DANCE_FN_ADVANCED(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn)`: Calls the first specified function - defined in the user keymap - on every tap, the second function when the dance action finishes (like the previous option), and the last function when the tap dance action resets.
 * `ACTION_TAP_DANCE_FN_ADVANCED_TIME(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn, tap_specific_tapping_term)`: This functions identically to the `ACTION_TAP_DANCE_FN_ADVANCED` function, but uses a custom tapping term for it, instead of the predefined `TAPPING_TERM`.
 
-The first option is enough for a lot of cases, that just want dual roles. For example, `ACTION_TAP_DANCE_DOUBLE(KC_SPC, KC_ENT)` will result in `Space` being sent on single-tap, `Enter` otherwise.
+The first option is enough for a lot of cases, that just want dual roles. For example, `ACTION_TAP_DANCE_DOUBLE(KC_SPC, KC_ENT)` will result in `Space` being sent on single-tap, `Enter` otherwise. 
 
 !> Keep in mind that only [basic keycodes](keycodes_basic.md) are supported here. Custom keycodes are not supported.
 
-And that's the bulk of it!
+Similar to the first option, the second option is good for simple layer-switching cases.
 
-And now, on to the explanation of how it works!
+For more complicated cases, use the third or fourth options (examples of each are listed below). 
 
-The main entry point is `process_tap_dance()`, called from `process_record_quantum()`, which is run for every keypress, and our handler gets to run early. This function checks whether the key pressed is a tap-dance key. If it is not, and a tap-dance was in action, we handle that first, and enqueue the newly pressed key. If it is a tap-dance key, then we check if it is the same as the already active one (if there's one active, that is). If it is not, we fire off the old one first, then register the new one. If it was the same, we increment the counter and the timer.
+Finally, the fifth option is particularly useful if your non-Tap-Dance keys start behaving weirdly after adding the code for your Tap Dance keys. The likely problem is that you changed the `TAPPING_TERM` time to make your Tap Dance keys easier for you to use, and that this has changed the way your other keys handle interrupts.
 
-This means that you have `TAPPING_TERM` time to tap the key again, you do not have to input all the taps within that timeframe. This allows for longer tap counts, with minimal impact on responsiveness.
+## Implementation Details
+Well, that's the bulk of it! You should now be able to work through the examples below, and to develop your own Tap Dance functionality. But if you want a deeper understanding of what's going on behind the scenes, then read on for the explanation of how it all works!
+
+The main entry point is `process_tap_dance()`, called from `process_record_quantum()`, which is run for every keypress, and our handler gets to run early. This function checks whether the key pressed is a tap-dance key. If it is not, and a tap-dance was in action, we handle that first, and enqueue the newly pressed key. If it is a tap-dance key, then we check if it is the same as the already active one (if there's one active, that is). If it is not, we fire off the old one first, then register the new one. If it was the same, we increment the counter and reset the timer.
+
+This means that you have `TAPPING_TERM` time to tap the key again; you do not have to input all the taps within a single `TAPPING_TERM` timeframe. This allows for longer tap counts, with minimal impact on responsiveness.
 
 Our next stop is `matrix_scan_tap_dance()`. This handles the timeout of tap-dance keys.
 
@@ -397,3 +413,111 @@ qk_tap_dance_action_t tap_dance_actions[] = {
 ```
 
 Wrap each tapdance keycode in `TD()` when including it in your keymap, e.g. `TD(ALT_LP)`.
+
+### Example 6: Using tap dance for momentary-layer-switch and layer-toggle keys
+
+Tap Dance can be used to mimic MO(layer) and TG(layer) functionality. For this example, we will set up a key to function as `KC_QUOT` on single-tap, as `MO(_MY_LAYER)` on single-hold, and `TG(_MY_LAYER)` on double-tap.
+
+The first step is to include the following code towards the beginning of your `keymap.c`:
+
+```
+typedef struct {
+  bool is_press_action;
+  int state;
+} tap;
+
+//Define a type for as many tap dance states as you need
+enum {
+  SINGLE_TAP = 1,
+  SINGLE_HOLD = 2,
+  DOUBLE_TAP = 3
+};
+
+enum {
+  QUOT_LAYR = 0     //Our custom tap dance key; add any other tap dance keys to this enum 
+};
+
+//Declare the functions to be used with your tap dance key(s)
+
+//Function associated with all tap dances
+int cur_dance (qk_tap_dance_state_t *state);
+
+//Functions associated with individual tap dances
+void ql_finished (qk_tap_dance_state_t *state, void *user_data);
+void ql_reset (qk_tap_dance_state_t *state, void *user_data);
+
+//Declare variable to track which layer is active
+int active_layer;
+```
+
+The above code is similar to that used in previous examples. The one point to note is that you need to declare a variable to keep track of what layer is currently the active layer. We'll see why shortly.
+
+Towards the bottom of your `keymap.c`, include the following code:
+
+```
+//Update active_layer
+uint32_t layer_state_set_user(uint32_t state) {
+  switch (biton32(state)) {
+    case 1:
+      active_layer = 1;
+      break;
+    case 2:
+      active_layer = 2;
+      break;
+    case 3:
+      active_layer = 3;
+      break;
+    default:
+      active_layer = 0;
+      break;
+  }
+  return state;
+}
+
+//Determine the current tap dance state
+int cur_dance (qk_tap_dance_state_t *state) {
+  if (state->count == 1) {
+    if (!state->pressed) {return SINGLE_TAP;}
+    else return SINGLE_HOLD;
+  } else if (state->count == 2) {return DOUBLE_TAP;}
+  else return 8;
+}
+
+//Initialize tap structure associated with example tap dance key
+static tap ql_tap_state = {
+  .is_press_action = true,
+  .state = 0
+};
+
+//Functions that control what our tap dance key does
+void ql_finished (qk_tap_dance_state_t *state, void *user_data) {
+  ql_tap_state.state = cur_dance(state);
+  switch (ql_tap_state.state) {
+    case SINGLE_TAP: tap_code(KC_QUOT); break;
+    case SINGLE_HOLD: layer_on(_MY_LAYER); break;
+    case DOUBLE_TAP: 
+      if (active_layer==_MY_LAYER) {layer_off(_MY_LAYER);}
+      else layer_on(_MY_LAYER);
+  }
+}
+
+void ql_reset (qk_tap_dance_state_t *state, void *user_data) {
+  if (ql_tap_state.state==SINGLE_HOLD) {layer_off(_MY_LAYER);}
+  ql_tap_state.state = 0;
+}
+
+//Associate our tap dance key with its functionality
+qk_tap_dance_action_t tap_dance_actions[] = {
+  [QUOT_LAYR] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(NULL, ql_finished, ql_reset, 275)
+};
+```
+
+The is where the real logic of our tap dance key gets worked out. Since `layer_state_set_user()` is called on any layer switch, we use it to update `active_layer`. Our example is assuming that your `keymap.c` includes 4 layers, so adjust the switch statement here to fit your actual number of layers.
+
+The use of `cur_dance()` and `ql_tap_state` mirrors the above examples.
+
+The `case:SINGLE_TAP` in `ql_finished` is similar to the above examples. The `case:SINGLE_HOLD` works in conjunction with `ql_reset()` to switch to `_MY_LAYER` while the tap dance key is held, and to switch away from `_MY_LAYER` when the key is released. This mirrors the use of `MO(_MY_LAYER)`. The `case:DOUBLE_TAP` works by checking whether `_MY_LAYER` is the active layer, and toggling it on or off accordingly. This mirrors the use of `TG(_MY_LAYER)`.
+
+`tap_dance_actions[]` works similar to the above examples. Note that I used `ACTION_TAP_DANCE_FN_ADVANCED_TIME()` instead of `ACTION_TAP_DANCE_FN_ADVANCED()`. This is because I like my `TAPPING_TERM` to be short (~175ms) for my non-tap-dance keys but find that this is too quick for me to reliably complete tap dance actions - thus the increased time of 275ms here.
+
+Finally, to get this tap dance key working, be sure to include `TD(QUOT_LAYR)` in your `keymaps[]`.

drivers/issi/is31fl3731.c

@@ -71,10 +71,10 @@ uint8_t g_twi_transfer_buffer[20];
 // buffers and the transfers in IS31FL3731_write_pwm_buffer() but it's
 // probably not worth the extra complexity.
 uint8_t g_pwm_buffer[DRIVER_COUNT][144];
-bool g_pwm_buffer_update_required = false;
+bool g_pwm_buffer_update_required[DRIVER_COUNT] = { false };
 
 uint8_t g_led_control_registers[DRIVER_COUNT][18] = { { 0 }, { 0 } };
-bool g_led_control_registers_update_required = false;
+bool g_led_control_registers_update_required[DRIVER_COUNT] = { false };
 
 // This is the bit pattern in the LED control registers
 // (for matrix A, add one to register for matrix B)
@@ -204,7 +204,7 @@ void IS31FL3731_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
         g_pwm_buffer[led.driver][led.r - 0x24] = red;
         g_pwm_buffer[led.driver][led.g - 0x24] = green;
         g_pwm_buffer[led.driver][led.b - 0x24] = blue;
-        g_pwm_buffer_update_required = true;
+        g_pwm_buffer_update_required[led.driver] = true;
     }
 }
 
@@ -220,12 +220,12 @@ void IS31FL3731_set_led_control_register( uint8_t index, bool red, bool green, b
 {
     is31_led led = g_is31_leds[index];
 
-  uint8_t control_register_r = (led.r - 0x24) / 8;
-  uint8_t control_register_g = (led.g - 0x24) / 8;
-  uint8_t control_register_b = (led.b - 0x24) / 8;
-  uint8_t bit_r = (led.r - 0x24) % 8;
-  uint8_t bit_g = (led.g - 0x24) % 8;
-  uint8_t bit_b = (led.b - 0x24) % 8;
+    uint8_t control_register_r = (led.r - 0x24) / 8;
+    uint8_t control_register_g = (led.g - 0x24) / 8;
+    uint8_t control_register_b = (led.b - 0x24) / 8;
+    uint8_t bit_r = (led.r - 0x24) % 8;
+    uint8_t bit_g = (led.g - 0x24) % 8;
+    uint8_t bit_b = (led.b - 0x24) % 8;
 
     if ( red ) {
         g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r);
@@ -243,28 +243,26 @@ void IS31FL3731_set_led_control_register( uint8_t index, bool red, bool green, b
         g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
     }
 
-    g_led_control_registers_update_required = true;
+    g_led_control_registers_update_required[led.driver] = true;
 
 }
 
-void IS31FL3731_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )
+void IS31FL3731_update_pwm_buffers( uint8_t addr, uint8_t index )
 {
-    if ( g_pwm_buffer_update_required )
+    if ( g_pwm_buffer_update_required[index] )
     {
-        IS31FL3731_write_pwm_buffer( addr1, g_pwm_buffer[0] );
-        IS31FL3731_write_pwm_buffer( addr2, g_pwm_buffer[1] );
+        IS31FL3731_write_pwm_buffer( addr, g_pwm_buffer[index] );
     }
-    g_pwm_buffer_update_required = false;
+    g_pwm_buffer_update_required[index] = false;
 }
 
-void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
+void IS31FL3731_update_led_control_registers( uint8_t addr, uint8_t index )
 {
-    if ( g_led_control_registers_update_required )
+    if ( g_led_control_registers_update_required[index] )
     {
         for ( int i=0; i<18; i++ )
         {
-            IS31FL3731_write_register(addr1, i, g_led_control_registers[0][i] );
-            IS31FL3731_write_register(addr2, i, g_led_control_registers[1][i] );
+            IS31FL3731_write_register( addr, i, g_led_control_registers[index][i] );
         }
     }
 }

drivers/issi/is31fl3731.h

@@ -44,8 +44,8 @@ void IS31FL3731_set_led_control_register( uint8_t index, bool red, bool green, b
 // (eg. from a timer interrupt).
 // Call this while idle (in between matrix scans).
 // If the buffer is dirty, it will update the driver with the buffer.
-void IS31FL3731_update_pwm_buffers( uint8_t addr1, uint8_t addr2 );
-void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
+void IS31FL3731_update_pwm_buffers( uint8_t addr, uint8_t index  );
+void IS31FL3731_update_led_control_registers( uint8_t addr, uint8_t index );
 
 #define C1_1  0x24
 #define C1_2  0x25

drivers/oled/oled_driver.c

@@ -321,7 +321,7 @@ void oled_render(void) {
 
     // Send render data chunk after rotating
     if (I2C_WRITE_REG(I2C_DATA, &temp_buffer[0], OLED_BLOCK_SIZE) != I2C_STATUS_SUCCESS) {
-      print("oled_render data failed\n");
+      print("oled_render90 data failed\n");
       return;
     }
   }
@@ -393,6 +393,11 @@ void oled_write_char(const char data, bool invert) {
     return;
   }
 
+  if (data == '\r') {
+    oled_advance_page(false);
+    return;
+  }
+
   // copy the current render buffer to check for dirty after
   static uint8_t oled_temp_buffer[OLED_FONT_WIDTH];
   memcpy(&oled_temp_buffer, oled_cursor, OLED_FONT_WIDTH);

keyboards/1upkeyboards/1up60hse/keymaps/default/keymap.c

@@ -17,6 +17,19 @@
 #include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Qwerty
+   * ,-----------------------------------------------------------------------------------------.
+   * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  | Backspace |
+   * |-----------------------------------------------------------------------------------------+
+   * |  Tab   |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |    \   |
+   * |-----------------------------------------------------------------------------------------+
+   * |  Caps   |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
+   * |-----------------------------------------------------------------------------------------+
+   * |   Shift   |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |      Shift      |
+   * |-----------------------------------------------------------------------------------------+
+   * | Ctrl  |  GUI  |  Alt  |              Space              |  Alt  |  GUI  |  L1   | Ctrl  |
+   * `-----------------------------------------------------------------------------------------'
+   */
   [0] = LAYOUT_60_ansi(
     KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
     KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
@@ -25,6 +38,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL
   ),
 
+  /* Function
+   * ,-----------------------------------------------------------------------------------------.
+   * |  `  | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 |    Del    |
+   * |-----------------------------------------------------------------------------------------+
+   * |        |     | Up  |     |     |     |     |     |     |     |PrtSc|ScrLk|Pause|        |
+   * |-----------------------------------------------------------------------------------------+
+   * |         |Left |Down |Right|     |     |     |     |     | Ins |Home |PgUp |             |
+   * |-----------------------------------------------------------------------------------------+
+   * |           |VolUp|VolDn|VolMu|     |     |     |     |     | End |PgDn |                 |
+   * |-----------------------------------------------------------------------------------------+
+   * |       |       |       |                                 |       |  L2   |       |       |
+   * `-----------------------------------------------------------------------------------------'
+   */
   [1] = LAYOUT_60_ansi(
     KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
     KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,
@@ -33,6 +59,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(2), KC_TRNS, KC_TRNS
   ),
 
+  /* RGB
+   * ,-----------------------------------------------------------------------------------------.
+   * |     |     |     |     |     |     |     |     |     |     |     |     |     |   Reset   |
+   * |-----------------------------------------------------------------------------------------+
+   * | BL Tog |BLInc|BLDec|BLStp|     |     |     |     |     |     |     |     |     |        |
+   * |-----------------------------------------------------------------------------------------+
+   * | RGB Tog |Mode |Hue I|Sat I|Val I|Spd I|Plain|Breat|Rnbow|Swirl|     |     |             |
+   * |-----------------------------------------------------------------------------------------+
+   * |           |RMode|Hue D|Sat D|Val D|Spd D|Snake|Knigh|Xmas |Gradi|     |                 |
+   * |-----------------------------------------------------------------------------------------+
+   * |       |       |       |                                 |       |       |       |       |
+   * `-----------------------------------------------------------------------------------------'
+   */
   [2] = LAYOUT_60_ansi(
     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,
     BL_TOGG, BL_INC, BL_DEC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,

keyboards/40percentclub/luddite/keymaps/default/keymap.c

@@ -1,7 +1,5 @@
 #include QMK_KEYBOARD_H
 
-extern keymap_config_t keymap_config;
-
 // Each layer gets a name for readability, which is then used in the keymap matrix below.
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
 // Layer names don't all need to be of the same length, obviously, and you can also skip them
@@ -15,18 +13,18 @@ enum custom_keycodes {
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [_BASE] = LAYOUT_60_ansi(
-    KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, \
-    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, \
-    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT, \
-    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, \
-    KC_LCTL , KC_LGUI , KC_LALT ,                      KC_SPC                    , KC_RALT , KC_RGUI , MO(_FN1)  , KC_RCTL
+    KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,   KC_BSPC,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,  KC_BSLS,
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,           KC_ENT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,                    KC_RSFT,
+    KC_LCTL, KC_LGUI, KC_LALT ,                           KC_SPC,                             KC_RALT, KC_RGUI, MO(_FN1), KC_RCTL
   ),
 
   [_FN1] = LAYOUT_60_ansi(
-    KC_GESC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_BSPC, \
-    RGB_TOG, RGB_MOD, KC_UP,   _______,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
-    _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______,\
-    BL_INC, BL_DEC, BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
-    KC_GRV, _______, _______, _______, _______,          _______, _______, _______
+    KC_GESC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,   KC_BSPC,
+    RGB_TOG, RGB_MOD, KC_UP,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______,
+    _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    BL_INC,  BL_DEC,  BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    KC_GRV,  _______, _______,                            _______,                            _______, _______, _______,  _______
   )
 };

keyboards/40percentclub/luddite/keymaps/tzarc/config.h

@@ -0,0 +1,6 @@
+#undef RGBLED_NUM
+#define RGBLED_NUM 16
+
+#define QMK_ESC_OUTPUT F4
+#define QMK_ESC_INPUT D3
+#define QMK_LED B0

keyboards/40percentclub/luddite/keymaps/tzarc/keymap.c

@@ -0,0 +1,30 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BASE 0
+#define _FN1 1
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT_60_ansi(
+    KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,   KC_BSPC,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,  KC_BSLS,
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,           KC_ENT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,                    KC_RSFT,
+    KC_LCTL, KC_LGUI, KC_LALT ,                           KC_SPC,                             KC_RALT, KC_APP,  MO(_FN1), KC_RCTL
+  ),
+
+  [_FN1] = LAYOUT_60_ansi(
+    KC_GESC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,   _______,
+    RGB_TOG, RGB_MOD, KC_UP,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______,
+    _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    BL_INC,  BL_DEC,  BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    KC_GRV,  _______, _______,                            _______,                            _______, KC_RGUI, _______,  _______
+  )
+};

keyboards/40percentclub/luddite/keymaps/tzarc/rules.mk

@@ -0,0 +1 @@
+BOOTLOADER = qmk-dfu

keyboards/40percentclub/luddite/luddite.h

@@ -3,7 +3,7 @@
 #include "quantum.h"
 
 #define LAYOUT_60_ansi( \
-	 K00, K01, K02, K03, K04, K05, K06, K07, K10, K11, K12, K13, K14, K15, \
+    K00, K01, K02, K03, K04, K05, K06, K07, K10, K11, K12, K13, K14, K15, \
     K16, K17, K20, K21, K22, K23, K24, K25, K26, K27, K30, K31, K32, K33, \
     K34, K35, K36, K37, K40, K41, K42, K43, K44, K45, K46, K47, K50, \
     K51, K52, K53, K54, K55, K56, K57, K60, K61, K62, K63, K64, \
@@ -18,4 +18,3 @@
 	{ K60,   K61,   K62,   K63,   K64,   K65,   K66,   K67 }, \
 	{ K70,   K71,   K72,   K73,   K74 }, \
 }
-

keyboards/angel64/config.h

@@ -48,16 +48,16 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3
 
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-//   #define RGBLED_NUM 64
-//   #define RGBLIGHT_HUE_STEP 8
-//   #define RGBLIGHT_SAT_STEP 8
-//   #define RGBLIGHT_VAL_STEP 8
-//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== all animations enable ==*/
-//   #define RGBLIGHT_ANIMATIONS
+#define RGB_DI_PIN D3
+#ifdef RGB_DI_PIN
+   #define RGBLED_NUM 64
+   #define RGBLIGHT_HUE_STEP 8
+   #define RGBLIGHT_SAT_STEP 8
+   #define RGBLIGHT_VAL_STEP 8
+   #define RGBLIGHT_LIMIT_VAL 25 /* The maximum brightness level */
+   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+ /*== all animations enable ==*/
+   #define RGBLIGHT_ANIMATIONS
 // /*== or choose animations ==*/
 //   #define RGBLIGHT_EFFECT_BREATHING
 //   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
@@ -74,7 +74,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //   /*==== use exp() and sin() ====*/
 //   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
 //   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
-// #endif
+#endif
 
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5

keyboards/angel64/rules.mk

@@ -61,17 +61,17 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
+EXTRAKEY_ENABLE = no        # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID

keyboards/ares/config.h

@@ -36,7 +36,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
 
-#define NO_BACKLIGHT_CLOCK
 #define BACKLIGHT_LEVELS 1
 #define RGBLIGHT_ANIMATIONS
 

keyboards/bfake/config.h

@@ -37,7 +37,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
 
-#define NO_BACKLIGHT_CLOCK
 #define BACKLIGHT_LEVELS 1
 #define RGBLIGHT_ANIMATIONS
 

keyboards/business_card/alpha/info.json

@@ -0,0 +1,19 @@
+{
+    "keyboard_name": "business_card alpha",
+    "url": "",
+    "maintainer": "kakunpc",
+    "width": 3,
+    "height": 2,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"1", "x":0, "y":0},
+                {"label":"2", "x":1, "y":0},
+                {"label":"3", "x":2, "y":0},
+                {"label":"4", "x":0, "y":1},
+                {"label":"5", "x":1, "y":1},
+                {"label":"6", "x":2, "y":1}
+            ]
+        }
+    }
+}

keyboards/business_card/beta/info.json

@@ -0,0 +1,19 @@
+{
+    "keyboard_name": "business_card beta",
+    "url": "",
+    "maintainer": "kakunpc",
+    "width": 2,
+    "height": 3,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"1", "x":0, "y":0},
+                {"label":"2", "x":1, "y":0},
+                {"label":"3", "x":0, "y":1},
+                {"label":"4", "x":1, "y":1},
+                {"label":"5", "x":0, "y":2},
+                {"label":"6", "x":1, "y":2}
+            ]
+        }
+    }
+}

keyboards/cannonkeys/satisfaction75/satisfaction75.c

@@ -17,8 +17,8 @@
 #include "tmk_core/common/eeprom.h"
 
 // HACK
-#include "keyboards/zeal60/zeal60_api.h" // Temporary hack
-#include "keyboards/zeal60/zeal60_keycodes.h" // Temporary hack
+#include "keyboards/wilba_tech/via_api.h" // Temporary hack
+#include "keyboards/wilba_tech/via_keycodes.h" // Temporary hack
 
 
 /* Artificial delay added to get media keys to work in the encoder*/
@@ -72,7 +72,7 @@ void eeprom_set_valid(bool valid)
 
 void eeprom_reset(void)
 {
-	// Set the Zeal60 specific EEPROM state as invalid.
+	// Set the VIA specific EEPROM state as invalid.
 	eeprom_set_valid(false);
 	// Set the TMK/QMK EEPROM state as invalid.
 	eeconfig_disable();

keyboards/cannonkeys/stm32f072/keyboard.c

@@ -12,8 +12,8 @@
 #include "tmk_core/common/eeprom.h"
 
 // HACK
-#include "keyboards/zeal60/zeal60_api.h" // Temporary hack
-#include "keyboards/zeal60/zeal60_keycodes.h" // Temporary hack
+#include "keyboards/wilba_tech/via_api.h" // Temporary hack
+#include "keyboards/wilba_tech/via_keycodes.h" // Temporary hack
 
 
 backlight_config_t kb_backlight_config = {

keyboards/canoe/config.h

@@ -37,7 +37,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
 
-#define NO_BACKLIGHT_CLOCK
 #define BACKLIGHT_LEVELS 1
 #define RGBLIGHT_ANIMATIONS
 

keyboards/choco60/choco60.c

@@ -0,0 +1,51 @@
+/* Copyright 2019 Naoto Takai
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "choco60.h"
+
+// Optional override functions below.
+// You can leave any or all of these undefined.
+// These are only required if you want to perform custom actions.
+
+/*
+
+void matrix_init_kb(void) {
+  // put your keyboard start-up code here
+  // runs once when the firmware starts up
+
+  matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+  // put your looping keyboard code here
+  // runs every cycle (a lot)
+
+  matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+  // put your per-action keyboard code here
+  // runs for every action, just before processing by the firmware
+
+  return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+  led_set_user(usb_led);
+}
+
+*/

keyboards/choco60/choco60.h

@@ -0,0 +1,46 @@
+/* Copyright 2019 Naoto Takai
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, R06, R07, R08, \
+    L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, R16, R17, \
+    L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, R26, \
+    L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35, R36, \
+    L40, L41,      L43,           R40, R41,      R43, R44 \
+) \
+{ \
+    { L00,   L01,   L02,   L03,   L04,   L05,   KC_NO, KC_NO, KC_NO }, \
+    { L10,   L11,   L12,   L13,   L14,   L15,   KC_NO, KC_NO, KC_NO }, \
+    { L20,   L21,   L22,   L23,   L24,   L25,   KC_NO, KC_NO, KC_NO }, \
+    { L30,   L31,   L32,   L33,   L34,   L35,   KC_NO, KC_NO, KC_NO }, \
+    { L40,   L41,   KC_NO, L43,   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+    { R00,   R01,   R02,   R03,   R04,   R05,   R06,   R07,   R08   }, \
+    { R10,   R11,   R12,   R13,   R14,   R15,   R16,   R17,   KC_NO }, \
+    { R20,   R21,   R22,   R23,   R24,   R25,   R26,   KC_NO, KC_NO }, \
+    { R30,   R31,   R32,   R33,   R34,   R35,   R36,   KC_NO, KC_NO }, \
+    { R40,   R41,   KC_NO, R43,   R44,   KC_NO, KC_NO, KC_NO, KC_NO }  \
+}

keyboards/choco60/config.h

@@ -0,0 +1,55 @@
+/*
+Copyright 2019 Naoto Takai
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xC0C0
+#define PRODUCT_ID      0x6000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Naoto Takai
+#define PRODUCT         choco60
+#define DESCRIPTION     A 60% split keyboard for programmers.
+
+/* key matrix size */
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 9
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, D1 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D3 // or D1, D2, D3, E6
+#define SPLIT_HAND_PIN D0

keyboards/choco60/info.json

@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "Choco60",
+    "url": "https://keys.recompile.net/projects/choco60/",
+    "maintainer": "Naoto Takai",
+    "width": 16,
+    "height": 5,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":7, "y":0}, {"label":"&", "x":8, "y":0}, {"label":"*", "x":9, "y":0}, {"label":"(", "x":10, "y":0}, {"label":")", "x":11, "y":0}, {"label":"_", "x":12, "y":0}, {"label":"+", "x":13, "y":0}, {"label":"|", "x":14, "y":0}, {"label":"~", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":7.5, "y":1}, {"label":"U", "x":8.5, "y":1}, {"label":"I", "x":9.5, "y":1}, {"label":"O", "x":10.5, "y":1}, {"label":"P", "x":11.5, "y":1}, {"label":"{", "x":12.5, "y":1}, {"label":"}", "x":13.5, "y":1}, {"label":"Delete", "x":14.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":7.75, "y":2}, {"label":"J", "x":8.75, "y":2}, {"label":"K", "x":9.75, "y":2}, {"label":"L", "x":10.75, "y":2}, {"label":":", "x":11.75, "y":2}, {"label":"\"", "x":12.75, "y":2}, {"label":"Return", "x":13.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":8.25, "y":3}, {"label":"M", "x":9.25, "y":3}, {"label":"<", "x":10.25, "y":3}, {"label":">", "x":11.25, "y":3}, {"label":"?", "x":12.25, "y":3}, {"label":"Shift", "x":13.25, "y":3, "w":1.75}, {"label":"Fn", "x":15, "y":3}, {"label":"Opt", "x":1.5, "y":4}, {"label":"\u2318", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":2.75}, {"label":"Opt", "x":7.75, "y":4}, {"x":8.75, "y":4, "w":2.25}, {"label":"\u2318", "x":11, "y":4, "w":1.5}, {"label":"Ctrl", "x":12.5, "y":4}]
+        }
+    }
+}

keyboards/choco60/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2019 Naoto Takai
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/choco60/keymaps/default/keymap.c

@@ -0,0 +1,41 @@
+/* Copyright 2019 Naoto Takai
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+enum layer_names {
+    _BASE,
+    _FN,
+};
+
+#define KC_FN MO(_FN)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT(
+    KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINUS, KC_EQUAL, KC_BSLASH, KC_GRAVE,
+    KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRACKET, KC_RBRACKET, KC_BSPACE,
+    KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCOLON, KC_QUOTE, KC_ENTER,
+    KC_LSHIFT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SLASH, KC_RSHIFT, KC_FN,
+    KC_LALT,  KC_LGUI, KC_SPACE, KC_SPACE, KC_SPACE, KC_RGUI, KC_RALT
+  ),
+  [_FN] = LAYOUT(
+    _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INSERT, KC_DELETE,
+    _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCREEN, KC_SCROLLLOCK, KC_PAUSE, KC_UP, KC_RBRACKET, KC_BSPACE,
+    _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_LEFT, KC_RIGHT, KC_ENTER,
+    RESET, _______, _______, _______, _______, _______, _______, _______, KC_END, KC_PGDOWN, KC_DOWN, KC_RSHIFT, KC_FN,
+    _______, _______, _______, _______, _______, KC_STOP, _______
+  )
+};

keyboards/choco60/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for choco60

keyboards/choco60/readme.md

@@ -0,0 +1,15 @@
+# choco60
+
+![choco60](https://keys.recompile.net/images/choco60-main@600w.jpg)
+
+A 60% split keyboard for programmers.
+
+Keyboard Maintainer: [Naoto Takai](https://github.com/takai)  
+Hardware Supported: The Choco60 PCBs, Pro Micro supported  
+Hardware Availability: https://keys.recompile.net/projects/choco60/
+
+Make example for this keyboard (after setting up your build environment):
+
+    make choco60:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/choco60/rules.mk

@@ -0,0 +1,82 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs (+400)
+
+SPLIT_KEYBOARD = yes        # Enable split keyboard

keyboards/cocoa40/cocoa40.c

@@ -0,0 +1,43 @@
+/* Copyright 2019 'Naoto Takai'
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "cocoa40.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/cocoa40/cocoa40.h

@@ -0,0 +1,44 @@
+/* Copyright 2019 'Naoto Takai'
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+
+#define LAYOUT( \
+    L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, R06, R07, \
+    L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, R16, \
+    L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, R26, \
+         L31, L32, L33,           R30,      R32, R33 \
+) \
+{ \
+    { L00,   L01,   L02,   L03,   L04,   L05,   KC_NO, KC_NO }, \
+    { L10,   L11,   L12,   L13,   L14,   L15,   KC_NO, KC_NO }, \
+    { L20,   L21,   L22,   L23,   L24,   L25,   KC_NO, KC_NO }, \
+    { KC_NO, L31,   L32,   L33,   KC_NO, KC_NO, KC_NO, KC_NO }, \
+    { R00,   R01,   R02,   R03,   R04,   R05,   R06,   R07 }, \
+    { R10,   R11,   R12,   R13,   R14,   R15,   R16,   KC_NO }, \
+    { R20,   R21,   R22,   R23,   R24,   R25,   R26,   KC_NO }, \
+    { R30,   KC_NO, R32,   R33,   KC_NO, KC_NO, KC_NO, KC_NO }  \
+}

keyboards/cocoa40/config.h

@@ -0,0 +1,55 @@
+/*
+Copyright 2019 'Naoto Takai'
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xC0C0
+#define PRODUCT_ID      0x4000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    recompile keys
+#define PRODUCT         cocoa40
+#define DESCRIPTION     A 40% keyboard for programmers.
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 8
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { F4, F5, F6, F7 }
+#define MATRIX_COL_PINS { B5, B4, E6, D7, C6, D4, D0, D1 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D2 // or D1, D2, D3, E6
+#define SPLIT_HAND_PIN D3

keyboards/cocoa40/info.json

@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "Cocoa40",
+    "url": "https://keys.recompile.net/projects/cocoa40/",
+    "maintainer": "Naoto Takai",
+    "width": 15.25,
+    "height": 4,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":7.25, "y":0}, {"label":"U", "x":8.25, "y":0}, {"label":"I", "x":9.25, "y":0}, {"label":"O", "x":10.25, "y":0}, {"label":"P", "x":11.25, "y":0}, {"label":"{", "x":12.25, "y":0}, {"label":"}", "x":13.25, "y":0}, {"label":"Back<br>Space", "x":14.25, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.25}, {"label":"A", "x":1.25, "y":1}, {"label":"S", "x":2.25, "y":1}, {"label":"D", "x":3.25, "y":1}, {"label":"F", "x":4.25, "y":1}, {"label":"G", "x":5.25, "y":1}, {"label":"H", "x":7.5, "y":1}, {"label":"J", "x":8.5, "y":1}, {"label":"K", "x":9.5, "y":1}, {"label":"L", "x":10.5, "y":1}, {"label":":", "x":11.5, "y":1}, {"label":"\"", "x":12.5, "y":1}, {"label":"Enter", "x":13.5, "y":1, "w":1.75}, {"label":"Shift", "x":0, "y":2, "w":1.75}, {"label":"Z", "x":1.75, "y":2}, {"label":"X", "x":2.75, "y":2}, {"label":"C", "x":3.75, "y":2}, {"label":"V", "x":4.75, "y":2}, {"label":"B", "x":5.75, "y":2}, {"label":"N", "x":8, "y":2}, {"label":"M", "x":9, "y":2}, {"label":"<", "x":10, "y":2}, {"label":">", "x":11, "y":2}, {"label":"?", "x":12, "y":2}, {"label":"Shift", "x":13, "y":2, "w":1.25}, {"label":"Fn", "x":14.25, "y":2}, {"label":"Opt", "x":1.5, "y":3}, {"label":"Command", "x":2.5, "y":3, "w":1.5}, {"label":"", "x":4, "y":3, "w":2.25}, {"label":"", "x":7.5, "y":3, "w":2.75}, {"label":"Command", "x":10.25, "y":3, "w":1.5}, {"label":"Opt", "x":11.75, "y":3}]
+        }
+    }
+}

keyboards/cocoa40/keymaps/default/config.h

@@ -0,0 +1,20 @@
+/* Copyright 2019 'Naoto Takai'
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here
+

keyboards/cocoa40/keymaps/default/keymap.c

@@ -0,0 +1,55 @@
+/* Copyright 2019 'Naoto Takai'
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+enum layer_names {
+	_BASE,
+	_NUMS,
+	_SYMS,
+	_FN,
+};
+
+#define KC_NUMS LT(_NUMS, KC_SPACE)
+#define KC_SYMS LT(_SYMS, KC_SPACE)
+#define KC_FN MO(_FN)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT(
+    KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRACKET, KC_RBRACKET, KC_BSPACE,
+    KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCOLON, KC_QUOTE, KC_ENTER,
+    KC_LSHIFT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SLASH, KC_RSHIFT, KC_FN,
+    KC_LALT,  KC_LGUI, KC_NUMS, KC_SYMS, KC_RGUI, KC_RALT
+  ),
+  [_NUMS] = LAYOUT(
+    KC_TAB, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINUS, KC_EQUAL, KC_BSLASH,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______
+  ),
+  [_SYMS] = LAYOUT(
+    KC_TILDE, KC_EXCLAIM, KC_AT, KC_HASH, KC_DOLLAR, KC_PERCENT, KC_CIRCUMFLEX, KC_AMPERSAND, KC_ASTERISK, KC_LEFT_PAREN, KC_RIGHT_PAREN, KC_MINUS, KC_PLUS, KC_PIPE,
+    _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______
+  ),
+  [_FN] = LAYOUT(
+    KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DELETE,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______
+  ),
+};

keyboards/cocoa40/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for cocoa40

keyboards/cocoa40/keymaps/default/rules.mk

@@ -0,0 +1 @@
+

keyboards/cocoa40/readme.md

@@ -0,0 +1,15 @@
+# cocoa40
+
+![cocoa40](https://keys.recompile.net/images/cocoa40-main@600w.jpg)
+
+A 40% split keyboard for programmers.
+
+Keyboard Maintainer: [Naoto Takai](https://github.com/takai)  
+Hardware Supported: The Cocoa40 PCBs, Pro Micro supported  
+Hardware Availability: https://keys.recompile.net/projects/cocoa40/
+
+Make example for this keyboard (after setting up your build environment):
+
+    make cocoa40:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/cocoa40/rules.mk

@@ -0,0 +1,81 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE =no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+SPLIT_KEYBOARD = yes

keyboards/converter/usb_usb/custom_matrix.cpp

@@ -74,8 +74,6 @@ static bool matrix_is_mod = false;
  * This supports two cascaded hubs and four keyboards
  */
 USB usb_host;
-USBHub hub1(&usb_host);
-USBHub hub2(&usb_host);
 HIDBoot<HID_PROTOCOL_KEYBOARD>    kbd1(&usb_host);
 HIDBoot<HID_PROTOCOL_KEYBOARD>    kbd2(&usb_host);
 HIDBoot<HID_PROTOCOL_KEYBOARD>    kbd3(&usb_host);
@@ -84,6 +82,8 @@ KBDReportParser kbd_parser1;
 KBDReportParser kbd_parser2;
 KBDReportParser kbd_parser3;
 KBDReportParser kbd_parser4;
+USBHub hub1(&usb_host);
+USBHub hub2(&usb_host);
 
 
 extern "C"
@@ -252,10 +252,10 @@ extern "C"
 
     void led_set(uint8_t usb_led)
     {
-        kbd1.SetReport(0, 0, 2, 0, 1, &usb_led);
-        kbd2.SetReport(0, 0, 2, 0, 1, &usb_led);
-        kbd3.SetReport(0, 0, 2, 0, 1, &usb_led);
-        kbd4.SetReport(0, 0, 2, 0, 1, &usb_led);
+        if (kbd1.isReady()) kbd1.SetReport(0, 0, 2, 0, 1, &usb_led);
+        if (kbd2.isReady()) kbd2.SetReport(0, 0, 2, 0, 1, &usb_led);
+        if (kbd3.isReady()) kbd3.SetReport(0, 0, 2, 0, 1, &usb_led);
+        if (kbd4.isReady()) kbd4.SetReport(0, 0, 2, 0, 1, &usb_led);
         led_set_kb(usb_led);
     }
 

keyboards/crkbd/keymaps/default/keymap.c

@@ -1,5 +1,4 @@
 #include QMK_KEYBOARD_H
-#include "bootloader.h"
 #ifdef PROTOCOL_LUFA
   #include "lufa.h"
   #include "split_util.h"
@@ -39,70 +38,52 @@ enum macro_keycodes {
   KC_SAMPLEMACRO,
 };
 
-#define KC______ KC_TRNS
-#define KC_XXXXX KC_NO
-#define KC_LOWER LOWER
-#define KC_RAISE RAISE
-#define KC_RST   RESET
-#define KC_LRST  RGBRST
-#define KC_LTOG  RGB_TOG
-#define KC_LHUI  RGB_HUI
-#define KC_LHUD  RGB_HUD
-#define KC_LSAI  RGB_SAI
-#define KC_LSAD  RGB_SAD
-#define KC_LVAI  RGB_VAI
-#define KC_LVAD  RGB_VAD
-#define KC_LMOD  RGB_MOD
-#define KC_CTLTB CTL_T(KC_TAB)
-#define KC_GUIEI GUI_T(KC_LANG2)
-#define KC_ALTKN ALT_T(KC_LANG1)
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [_QWERTY] = LAYOUT_kc( \
+  [_QWERTY] = LAYOUT( \
   //,-----------------------------------------.                ,-----------------------------------------.
-        ESC,     Q,     W,     E,     R,     T,                      Y,     U,     I,     O,     P,  BSPC,\
+     KC_TAB,  KC_Q,  KC_W,  KC_E,  KC_R,  KC_T,                   KC_Y,  KC_U,  KC_I,  KC_O,  KC_P,KC_BSPC,\
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-      CTLTB,     A,     S,     D,     F,     G,                      H,     J,     K,     L,  SCLN,  QUOT,\
+    KC_LCTL,  KC_A,  KC_S,  KC_D,  KC_F,  KC_G,                   KC_H,  KC_J,  KC_K,  KC_L,KC_SCLN,KC_QUOT,\
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-       LSFT,     Z,     X,     C,     V,     B,                      N,     M,  COMM,   DOT,  SLSH,  RSFT,\
+    KC_LSFT,  KC_Z,  KC_X,  KC_C,  KC_V,  KC_B,                   KC_N,  KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_RSFT,\
   //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-                                  GUIEI, LOWER,   SPC,      ENT, RAISE, ALTKN \
+                                KC_LGUI, LOWER,KC_SPC,   KC_ENT, RAISE,KC_RALT \
                               //`--------------------'  `--------------------'
   ),
 
-  [_LOWER] = LAYOUT_kc( \
+  [_LOWER] = LAYOUT( \
   //,-----------------------------------------.                ,-----------------------------------------.
-        ESC,     1,     2,     3,     4,     5,                      6,     7,     8,     9,     0,  BSPC,\
+     KC_ESC,  KC_1,  KC_2,  KC_3,  KC_4,  KC_5,                   KC_6,  KC_7,  KC_8,  KC_9,  KC_0,KC_BSPC,\
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-      CTLTB,    F1,    F2,    F3,    F4,    F5,                     F6,    F7,    F8,    F9,   F10, XXXXX,\
+    KC_LCTL, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,                KC_LEFT,KC_DOWN,KC_UP, KC_RIGHT,KC_NO,KC_NO,\
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-       LSFT,   F11,   F12,   F13,   F14,   F15,                    F16,   F17,   F18,   F19,   F20, XXXXX,\
+    KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,                  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,\
   //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-                                  GUIEI, LOWER,   SPC,      ENT, RAISE, ALTKN \
+                                KC_LGUI, LOWER,KC_SPC,   KC_ENT, RAISE,KC_RALT \
                               //`--------------------'  `--------------------'
   ),
 
-  [_RAISE] = LAYOUT_kc( \
+  [_RAISE] = LAYOUT( \
   //,-----------------------------------------.                ,-----------------------------------------.
-        ESC,  EXLM,    AT,  HASH,   DLR,  PERC,                   CIRC,  AMPR,  ASTR,  LPRN,  RPRN,  BSPC,\
+     KC_ESC,KC_EXLM,KC_AT,KC_HASH,KC_DLR,KC_PERC,              KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_BSPC,\
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-      CTLTB, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,                   MINS,   EQL,  LCBR,  RCBR,  PIPE,   GRV,\
+    KC_LCTL, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,                KC_MINS,KC_EQL,KC_LCBR,KC_RCBR,KC_PIPE,KC_GRV,\
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-       LSFT, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,                   UNDS,  PLUS,  LBRC,  RBRC,  BSLS,  TILD,\
+    KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,                KC_UNDS,KC_PLUS,KC_LBRC,KC_RBRC,KC_BSLS,KC_TILD,\
   //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-                                  GUIEI, LOWER,   SPC,      ENT, RAISE, ALTKN \
+                                KC_LGUI, LOWER,KC_SPC,   KC_ENT, RAISE,KC_RALT \
                               //`--------------------'  `--------------------'
   ),
 
-  [_ADJUST] = LAYOUT_kc( \
+  [_ADJUST] = LAYOUT( \
   //,-----------------------------------------.                ,-----------------------------------------.
-        RST,  LRST, XXXXX, XXXXX, XXXXX, XXXXX,                  XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
+      RESET,RGBRST, KC_NO, KC_NO, KC_NO, KC_NO,                  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,\
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-       LTOG,  LHUI,  LSAI,  LVAI, XXXXX, XXXXX,                  XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
+    RGB_TOG,RGB_HUI,RGB_SAI,RGB_VAI,KC_NO,KC_NO,                 KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,\
   //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-       LMOD,  LHUD,  LSAD,  LVAD, XXXXX, XXXXX,                  XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
+    RGB_MOD,RGB_HUD,RGB_SAD,RGB_VAD,KC_NO,KC_NO,                 KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,\
   //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-                                  GUIEI, LOWER,   SPC,      ENT, RAISE, ALTKN \
+                                KC_LGUI, LOWER,KC_SPC,   KC_ENT, RAISE,KC_RALT \
                               //`--------------------'  `--------------------'
   )
 };
@@ -157,7 +138,7 @@ void matrix_render_user(struct CharacterMatrix *matrix) {
     // If you want to change the display of OLED, you need to change here
     matrix_write_ln(matrix, read_layer_state());
     matrix_write_ln(matrix, read_keylog());
-    matrix_write_ln(matrix, read_keylogs());
+    //matrix_write_ln(matrix, read_keylogs());
     //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
     //matrix_write_ln(matrix, read_host_led_state());
     //matrix_write_ln(matrix, read_timelog());
@@ -195,7 +176,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         persistent_default_layer_set(1UL<<_QWERTY);
       }
       return false;
-      break;
     case LOWER:
       if (record->event.pressed) {
         layer_on(_LOWER);
@@ -205,7 +185,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
       }
       return false;
-      break;
     case RAISE:
       if (record->event.pressed) {
         layer_on(_RAISE);
@@ -215,7 +194,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
       }
       return false;
-      break;
     case ADJUST:
         if (record->event.pressed) {
           layer_on(_ADJUST);
@@ -223,7 +201,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
           layer_off(_ADJUST);
         }
         return false;
-        break;
     case RGB_MOD:
       #ifdef RGBLIGHT_ENABLE
         if (record->event.pressed) {
@@ -233,7 +210,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         }
       #endif
       return false;
-      break;
     case RGBRST:
       #ifdef RGBLIGHT_ENABLE
         if (record->event.pressed) {

keyboards/crkbd/keymaps/drashna/config.h

@@ -20,7 +20,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
 /* Select hand configuration */
 
 // #define MASTER_LEFT
@@ -36,52 +35,31 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define TAPPING_TERM 100
 
 #ifdef RGBLIGHT_ENABLE
-#   undef RGBLED_NUM
-#   define RGBLED_NUM 27
+#    undef RGBLED_NUM
+#    define RGBLED_NUM 27
 
-#   define RGBLIGHT_HUE_STEP 8
-#   define RGBLIGHT_SAT_STEP 8
-#   define RGBLIGHT_VAL_STEP 8
-#   define RGBLIGHT_LIMIT_VAL 100
+#    define RGBLIGHT_HUE_STEP 8
+#    define RGBLIGHT_SAT_STEP 8
+#    define RGBLIGHT_VAL_STEP 5
+#    define RGBLIGHT_LIMIT_VAL 150
 #endif
 
 #ifdef RGB_MATRIX_ENABLE
-#   define RGB_MATRIX_KEYPRESSES // reacts to keypresses
-#   define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
-#   define RGB_MATRIX_FRAMEBUFFER_EFFECTS
-
-// #   define DISABLE_RGB_MATRIX_ALPHAS_MODS
-#   define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
-#   define DISABLE_RGB_MATRIX_BREATHING
-#   define DISABLE_RGB_MATRIX_CYCLE_ALL
-#   define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
-#   define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN
-// #   define DISABLE_RGB_MATRIX_CYCLE_OUT_IN
-// #   define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
-#   define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
-#   define DISABLE_RGB_MATRIX_DUAL_BEACON
-#   define DISABLE_RGB_MATRIX_RAINBOW_BEACON
-#   define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS
-// #   define DISABLE_RGB_MATRIX_RAINDROPS
-// #   define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
-// #   define DISABLE_RGB_MATRIX_TYPING_HEATMAP
-// #   define DISABLE_RGB_MATRIX_DIGITAL_RAIN
-#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE
-#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
-#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
-#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
-#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
-#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
-#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
-#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
-#   define DISABLE_RGB_MATRIX_SPLASH
-// #   define DISABLE_RGB_MATRIX_MULTISPLASH
-#   define DISABLE_RGB_MATRIX_SOLID_SPLASH
-#   define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
+#    define RGB_MATRIX_KEYPRESSES  // reacts to keypresses
+// #   define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
+// #   define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED true  // turn off effects when suspended
+// #   define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
+// #   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
+#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150  // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
+#    define RGB_MATRIX_HUE_STEP 8
+#    define RGB_MATRIX_SAT_STEP 8
+#    define RGB_MATRIX_VAL_STEP 5
+#    define RGB_MATRIX_SPD_STEP 10
 #endif
 
 #ifdef AUDIO_ENABLE
-#   define B6_AUDIO
+#    define B6_AUDIO
 // #define NO_MUSIC_MODE
 #endif
 
@@ -92,4 +70,5 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define OLED_FONT_WIDTH 5
 // #define OLED_FONT_HEIGHT 7
 
+#define OLED_DISABLE_TIMEOUT
 #define TAPPING_TERM_PER_KEY

keyboards/crkbd/keymaps/drashna/keymap.c

@@ -2,17 +2,16 @@
 #include "drashna.h"
 
 extern keymap_config_t keymap_config;
-extern uint8_t is_master;
+extern uint8_t         is_master;
 
 #ifdef RGBLIGHT_ENABLE
-//Following line allows macro to read current RGB settings
+// Following line allows macro to read current RGB settings
 extern rgblight_config_t rgblight_config;
 #endif
 
-enum crkbd_keycodes {
-    RGBRST = NEW_SAFE_RANGE
-};
+enum crkbd_keycodes { RGBRST = NEW_SAFE_RANGE };
 
+// clang-format off
 #define LAYOUT_crkbd_base( \
     K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
     K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \
@@ -103,60 +102,30 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                                      _______, KC_NUKE, _______,        _______, TG_MODS, _______
   )
 };
-
-void matrix_init_keymap(void) {
-#ifndef CONVERT_TO_PROTON_C
-    setPinOutput(D5);
-    writePinHigh(D5);
-
-    setPinOutput(B0);
-    writePinHigh(B0);
-#endif
-}
-
+// clang-format on
 
 #ifdef OLED_DRIVER_ENABLE
-oled_rotation_t oled_init_user(oled_rotation_t rotation) {
-    if (is_master) {
-        return OLED_ROTATION_270;
-    } else {
-        return rotation;
-    }
-}
+oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_270; }
+uint16_t        oled_timer;
 
-void render_crkbd_logo(void) {
-    static const char PROGMEM crkbd_logo[] = {
-        0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94,
-        0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4,
-        0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4,
-        0};
-    oled_write_P(crkbd_logo, false);
-}
+char     keylog_str[5]   = {};
+uint8_t  keylogs_str_idx = 0;
+uint16_t log_timer       = 0;
 
-#define KEYLOG_LEN (int)(32 / OLED_FONT_WIDTH)
-char keylog_str[KEYLOG_LEN] = {};
-uint8_t keylogs_str_idx = 0;
-uint16_t log_timer = 0;
-
-const char code_to_name[60] = {
-    ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f',
-    'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p',
-    'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z',
-    '1', '2', '3', '4', '5', '6', '7', '8', '9', '0',
-    'R', 'E', 'B', 'T', '_', '-', '=', '[', ']', '\\',
-    '#', ';', '\'', '`', ',', '.', '/', ' ', ' ', ' '};
+const char code_to_name[60] = {' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', 'R', 'E', 'B', 'T', '_', '-', '=', '[', ']', '\\', '#', ';', '\'', '`', ',', '.', '/', ' ', ' ', ' '};
 
 void add_keylog(uint16_t keycode) {
-    if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) ||
-        (keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX)) { keycode = keycode & 0xFF; }
+    if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) || (keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX)) {
+        keycode = keycode & 0xFF;
+    }
 
-    for (uint8_t i = KEYLOG_LEN - 1; i > 0; i--) {
+    for (uint8_t i = 4; i > 0; i--) {
         keylog_str[i] = keylog_str[i - 1];
     }
     if (keycode < 60) {
         keylog_str[0] = code_to_name[keycode];
     }
-    keylog_str[KEYLOG_LEN] = 0;
+    keylog_str[5] = 0;
 
     log_timer = timer_read();
 }
@@ -167,94 +136,153 @@ void update_log(void) {
     }
 }
 
-
 bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
-    if (record->event.pressed) {  add_keylog(keycode); }
+    if (record->event.pressed) {
+        add_keylog(keycode);
+        oled_timer = timer_read();
+    }
     return true;
 }
 
-void render_status(void) {
+void render_rgb_status(void) {
+    oled_write_ln("RGB:", false);
+    static char temp[20] = {0};
+    snprintf(temp, sizeof(temp) + 1, "M:%3dH:%3dS:%3dV:%3d", rgb_matrix_config.mode, rgb_matrix_config.hsv.h, rgb_matrix_config.hsv.s, rgb_matrix_config.hsv.v);
+    oled_write(temp, false);
+}
 
-    oled_write_P(PSTR("Layer"), false);
-    switch (biton32(layer_state)) {
-        case 0:
-            oled_write_P(PSTR("Base "), false);
-            break;
-        case _RAISE:
-            oled_write_P(PSTR("Raise"), false);
-            break;
-        case _LOWER:
-            oled_write_P(PSTR("Lower"), false);
-            break;
-        case _ADJUST:
-            oled_write_P(PSTR("Adjst"), false);
-            break;
-        default:
-            oled_write_P(PSTR("Unkn "), false);
-            break;
-    }
-    oled_write_P(PSTR("Lyout"), false);
+void render_status_main(void) {
+    /* Show Keyboard Layout  */
+    oled_write("Lyout", false);
     switch (biton32(default_layer_state)) {
         case _QWERTY:
-            oled_write_P(PSTR("QWRTY"), false);
+            oled_write(" QRTY", false);
             break;
         case _COLEMAK:
-            oled_write_P(PSTR("COLMK"), false);
+            oled_write(" COLE", false);
             break;
         case _DVORAK:
-            oled_write_P(PSTR("DVRAK"), false);
+            oled_write(" DVRK", false);
             break;
         case _WORKMAN:
-            oled_write_P(PSTR("WRKMN"), false);
+            oled_write(" WKMN", false);
             break;
         case _NORMAN:
-            oled_write_P(PSTR("NORMN"), false);
+            oled_write(" NORM", false);
             break;
         case _MALTRON:
-            oled_write_P(PSTR("MLTRN"), false);
+            oled_write(" MLTN", false);
             break;
         case _EUCALYN:
-            oled_write_P(PSTR("ECLYN"), false);
+            oled_write(" ECLN", false);
             break;
         case _CARPLAX:
-            oled_write_P(PSTR("CRPLX"), false);
+            oled_write(" CRPX", false);
             break;
     }
 
-    uint8_t modifiers = get_mods();
-    uint8_t one_shot = get_oneshot_mods();
-
-    oled_write_P(PSTR("Mods:"), false);
-    oled_write_P( (modifiers & MOD_MASK_SHIFT || one_shot & MOD_MASK_SHIFT) ? PSTR(" SFT ") : PSTR("     "), false);
-    oled_write_P( (modifiers & MOD_MASK_CTRL  || one_shot & MOD_MASK_CTRL ) ? PSTR(" CTL ") : PSTR("     "), false);
-    oled_write_P( (modifiers & MOD_MASK_ALT   || one_shot & MOD_MASK_ALT  ) ? PSTR(" ALT ") : PSTR("     "), false);
-    oled_write_P( (modifiers & MOD_MASK_GUI   || one_shot & MOD_MASK_GUI  ) ? PSTR(" GUI ") : PSTR("     "), false);
-
-
-    oled_write_P(PSTR("BTMGK"), false);
-
-    if (keymap_config.swap_lalt_lgui) {
-        oled_write_P(PSTR(" Mac "), false);
-    } else {
-        oled_write_P(PSTR(" Win "), false);
-    }
-
+    /* Show Lock Status (only work on master side) */
     uint8_t led_usb_state = host_keyboard_leds();
-    oled_write_P(PSTR("Lock:"), false);
-    oled_write_P(led_usb_state & (1<<USB_LED_NUM_LOCK)    ? PSTR(" NUM ") : PSTR("     "), false);
-    oled_write_P(led_usb_state & (1<<USB_LED_CAPS_LOCK)   ? PSTR(" CAPS") : PSTR("     "), false);
-    oled_write_P(led_usb_state & (1<<USB_LED_SCROLL_LOCK) ? PSTR(" SCRL") : PSTR("     "), false);
+    oled_write("Lock:", false);
+    oled_write(" ", false);
+    oled_write_ln("NUM", led_usb_state & (1 << USB_LED_NUM_LOCK));
+    oled_write(" ", false);
+    oled_write("CAPS", led_usb_state & (1 << USB_LED_CAPS_LOCK));
+    oled_write(" ", false);
+    oled_write("SCRL", led_usb_state & (1 << USB_LED_SCROLL_LOCK));
+
+    /* Show Alt-Gui Swap options */
+    oled_write("BTMGK", false);
+    oled_write(" ", false);
+    oled_write_ln("Win", !keymap_config.swap_lalt_lgui);
+    oled_write(" ", false);
+    oled_write_ln("Mac", keymap_config.swap_lalt_lgui);
+
+#    if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
+    /* Show RGB Options */
+    render_rgb_status();
+#    endif
 
     oled_write(keylog_str, false);
 }
 
+void render_status_secondary(void) {
+    /* Show Keyboard Layout  */
+    oled_write("Lyout", false);
+    switch (biton32(default_layer_state)) {
+        case _QWERTY:
+            oled_write(" QRTY", false);
+            break;
+        case _COLEMAK:
+            oled_write(" COLE", false);
+            break;
+        case _DVORAK:
+            oled_write(" DVRK", false);
+            break;
+        case _WORKMAN:
+            oled_write(" WKMN", false);
+            break;
+        case _NORMAN:
+            oled_write(" NORM", false);
+            break;
+        case _MALTRON:
+            oled_write(" MLTN", false);
+            break;
+        case _EUCALYN:
+            oled_write(" ECLN", false);
+            break;
+        case _CARPLAX:
+            oled_write(" CRPX", false);
+            break;
+    }
+
+    /* Show Activate layer */
+    oled_write("Layer", false);
+    switch (biton32(layer_state)) {
+        case _RAISE:
+            oled_write("Raise", false);
+            break;
+        case _LOWER:
+            oled_write("Lower", false);
+            break;
+        case _ADJUST:
+            oled_write("Adjst", false);
+            break;
+        default:
+            oled_write("Dflt ", false);
+            break;
+    }
+
+    /* Show Mod  */
+    uint8_t modifiers = get_mods() | get_oneshot_mods();
+
+    oled_write("Mods:", false);
+    oled_write(" ", false);
+    oled_write_ln("SFT", (modifiers & MOD_MASK_SHIFT));
+    oled_write(" ", false);
+    oled_write_ln("CTL", (modifiers & MOD_MASK_CTRL));
+    oled_write(" ", false);
+    oled_write_ln("ALT", (modifiers & MOD_MASK_ALT));
+    oled_write(" ", false);
+    oled_write_ln("GUI", (modifiers & MOD_MASK_GUI));
+
+#    if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
+    render_rgb_status();
+#    endif
+
+    /* Show logged Keys */
+    oled_write(keylog_str, false);
+}
 
 void oled_task_user(void) {
+    if (timer_elapsed(oled_timer) > 60000) {
+        oled_off();
+        return;
+    }
     if (is_master) {
-        render_status();     // Renders the current keyboard state (layer, lock, caps, scroll, etc)
+        render_status_main();  // Renders the current keyboard state (layer, lock, caps, scroll, etc)
     } else {
-        render_crkbd_logo();
-        oled_scroll_left();  // Turns on scrolling
+        render_status_secondary();
     }
 }
 
@@ -272,57 +300,82 @@ uint16_t get_tapping_term(uint16_t keycode) {
 
 #ifdef RGB_MATRIX_ENABLE
 
+static bool is_suspended;
+static bool rgb_matrix_enabled;
+
 void suspend_power_down_keymap(void) {
     rgb_matrix_set_suspend_state(true);
+    if (!is_suspended) {
+        is_suspended = true;
+        rgb_matrix_enabled = (bool)rgb_matrix_config.enable;
+        rgb_matrix_disable_noeeprom();
+    }
 }
 
 void suspend_wakeup_init_keymap(void) {
     rgb_matrix_set_suspend_state(false);
+    is_suspended = false;
+    if (rgb_matrix_enabled) {
+        rgb_matrix_enable_noeeprom();
+    }
 }
-
 void rgb_matrix_indicators_user(void) {
-    if ( userspace_config.rgb_layer_change &&
-#ifdef RGB_DISABLE_WHEN_USB_SUSPENDED
+    if (userspace_config.rgb_layer_change &&
+#    ifdef RGB_DISABLE_WHEN_USB_SUSPENDED
         !g_suspend_state &&
-#endif
-#if defined(RGBLIGHT_ENABLE)
+#    endif
+#    if defined(RGBLIGHT_ENABLE)
         (!rgblight_config.enable && rgb_matrix_config.enable)
-#else
+#    else
         rgb_matrix_config.enable
-#endif
+#    endif
     ) {
         switch (biton32(layer_state)) {
-            case _MODS:
-                rgb_matrix_layer_helper(0xFF, 0xFF, 0x00, LED_FLAG_UNDERGLOW); break;
             case _GAMEPAD:
-                rgb_matrix_layer_helper(0xFF, 0x80, 0x00, LED_FLAG_UNDERGLOW); break;
+                rgb_matrix_layer_helper(HSV_ORANGE, 1, rgb_matrix_config.speed, LED_FLAG_UNDERGLOW);
+                break;
             case _DIABLO:
-                rgb_matrix_layer_helper(0xFF, 0x00, 0x00, LED_FLAG_UNDERGLOW); break;
+                rgb_matrix_layer_helper(HSV_RED, 1, rgb_matrix_config.speed, LED_FLAG_UNDERGLOW);
+                break;
             case _RAISE:
-                rgb_matrix_layer_helper(0xFF, 0xFF, 0x00, LED_FLAG_UNDERGLOW); break;
+                rgb_matrix_layer_helper(HSV_YELLOW, 1, rgb_matrix_config.speed, LED_FLAG_UNDERGLOW);
+                break;
             case _LOWER:
-                rgb_matrix_layer_helper(0x00, 0xFF, 0x00, LED_FLAG_UNDERGLOW); break;
+                rgb_matrix_layer_helper(HSV_GREEN, 1, rgb_matrix_config.speed, LED_FLAG_UNDERGLOW);
+                break;
             case _ADJUST:
-                rgb_matrix_layer_helper(0xFF, 0x00, 0x00, LED_FLAG_UNDERGLOW); break;
-            default:
+                rgb_matrix_layer_helper(HSV_RED, 1, rgb_matrix_config.speed, LED_FLAG_UNDERGLOW);
+                break;
+            default: {
+                bool mods_enabled = IS_LAYER_ON(_MODS);
                 switch (biton32(default_layer_state)) {
                     case _QWERTY:
-                        rgb_matrix_layer_helper(0x00, 0xFF, 0xFF, LED_FLAG_UNDERGLOW); break;
+                        rgb_matrix_layer_helper(HSV_CYAN, mods_enabled, rgb_matrix_config.speed, LED_FLAG_UNDERGLOW);
+                        break;
                     case _COLEMAK:
-                        rgb_matrix_layer_helper(0xFF, 0x00, 0xFF, LED_FLAG_UNDERGLOW); break;
+                        rgb_matrix_layer_helper(HSV_MAGENTA, mods_enabled, rgb_matrix_config.speed, LED_FLAG_UNDERGLOW);
+                        break;
                     case _DVORAK:
-                        rgb_matrix_layer_helper(0x00, 0xFF, 0x00, LED_FLAG_UNDERGLOW); break;
+                        rgb_matrix_layer_helper(HSV_SPRINGGREEN, mods_enabled, rgb_matrix_config.speed, LED_FLAG_UNDERGLOW);
+                        break;
                     case _WORKMAN:
-                        rgb_matrix_layer_helper(0xD9, 0xA5, 0x21, LED_FLAG_UNDERGLOW); break;
+                        rgb_matrix_layer_helper(HSV_GOLDENROD, mods_enabled, rgb_matrix_config.speed, LED_FLAG_UNDERGLOW);
+                        break;
                     case _NORMAN:
-                        rgb_matrix_layer_helper(0xFF, 0x7C, 0x4D, LED_FLAG_UNDERGLOW); break;
+                        rgb_matrix_layer_helper(HSV_CORAL, mods_enabled, rgb_matrix_config.speed, LED_FLAG_UNDERGLOW);
+                        break;
                     case _MALTRON:
-                        rgb_matrix_layer_helper(0xFF, 0xFF, 0x00, LED_FLAG_UNDERGLOW); break;
+                        rgb_matrix_layer_helper(HSV_YELLOW, mods_enabled, rgb_matrix_config.speed, LED_FLAG_UNDERGLOW);
+                        break;
                     case _EUCALYN:
-                        rgb_matrix_layer_helper(0xFF, 0x80, 0xBF, LED_FLAG_UNDERGLOW); break;
+                        rgb_matrix_layer_helper(HSV_PINK, mods_enabled, rgb_matrix_config.speed, LED_FLAG_UNDERGLOW);
+                        break;
                     case _CARPLAX:
-                        rgb_matrix_layer_helper(0x00, 0x00, 0xFF, LED_FLAG_UNDERGLOW); break;
+                        rgb_matrix_layer_helper(HSV_BLUE, mods_enabled, rgb_matrix_config.speed, LED_FLAG_UNDERGLOW);
+                        break;
                 }
+                break;
+            }
         }
     }
 }

keyboards/crkbd/keymaps/drashna/rules.mk

@@ -16,7 +16,6 @@ UNICODE_ENABLE             = no  # Unicode
 BLUETOOTH_ENABLE           = no  # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE            = no  # Enable WS2812 RGB underlight.
 SWAP_HANDS_ENABLE          = no  # Enable one-hand typing
-RGBLIGHT_STARTUP_ANIMATION = yes
 RGB_MATRIX_ENABLE = WS2812
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
@@ -25,7 +24,3 @@ SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 BOOTLOADER = qmk-dfu
 
 OLED_DRIVER_ENABLE = yes
-
-ifneq ($(strip $(OLED_DRIVER_ENABLE)), yes)
-    RGB_MATRIX_SPLIT_RIGHT=yes
-endif

keyboards/crkbd/keymaps/foostan/config.h

@@ -0,0 +1,44 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+//#define USE_MATRIX_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+#define SSD1306OLED
+
+#define USE_SERIAL_PD2
+
+#define TAPPING_FORCE_HOLD
+#define TAPPING_TERM 100
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 27
+#define RGBLIGHT_LIMIT_VAL 120
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17

keyboards/crkbd/keymaps/foostan/keymap.c

@@ -0,0 +1,241 @@
+#include QMK_KEYBOARD_H
+#ifdef PROTOCOL_LUFA
+  #include "lufa.h"
+  #include "split_util.h"
+#endif
+#ifdef SSD1306OLED
+  #include "ssd1306.h"
+#endif
+
+extern keymap_config_t keymap_config;
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+#endif
+
+extern uint8_t is_master;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _LOWER 1
+#define _RAISE 2
+#define _ADJUST 3
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST,
+  BACKLIT,
+  RGBRST
+};
+
+enum macro_keycodes {
+  KC_SAMPLEMACRO,
+};
+
+#define KC______ KC_TRNS
+#define KC_XXXXX KC_NO
+#define KC_LOWER LOWER
+#define KC_RAISE RAISE
+#define KC_RST   RESET
+#define KC_LRST  RGBRST
+#define KC_LTOG  RGB_TOG
+#define KC_LHUI  RGB_HUI
+#define KC_LHUD  RGB_HUD
+#define KC_LSAI  RGB_SAI
+#define KC_LSAD  RGB_SAD
+#define KC_LVAI  RGB_VAI
+#define KC_LVAD  RGB_VAD
+#define KC_LMOD  RGB_MOD
+#define KC_GUIEI GUI_T(KC_LANG2)
+#define KC_ALTKN ALT_T(KC_LANG1)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY] = LAYOUT_kc( \
+  //,-----------------------------------------.                ,-----------------------------------------.
+        TAB,     Q,     W,     E,     R,     T,                      Y,     U,     I,     O,     P,  BSPC,\
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+       LCTL,     A,     S,     D,     F,     G,                      H,     J,     K,     L,  SCLN,  QUOT,\
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+       LSFT,     Z,     X,     C,     V,     B,                      N,     M,  COMM,   DOT,  SLSH,   ESC,\
+  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
+                                  GUIEI, LOWER,   SPC,      ENT, RAISE, ALTKN \
+                              //`--------------------'  `--------------------'
+  ),
+
+  [_LOWER] = LAYOUT_kc( \
+  //,-----------------------------------------.                ,-----------------------------------------.
+        TAB,     1,     2,     3,     4,     5,                      6,     7,     8,     9,     0,  BSPC,\
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+       LCTL,    F1,    F2,    F3,    F4,    F5,                   LEFT,  DOWN,    UP, RIGHT, XXXXX, XXXXX,\
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+       LSFT,    F6,    F7,    F8,    F9,   F10,                  XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
+  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
+                                  GUIEI, LOWER,   SPC,      ENT, RAISE, ALTKN \
+                              //`--------------------'  `--------------------'
+  ),
+
+  [_RAISE] = LAYOUT_kc( \
+  //,-----------------------------------------.                ,-----------------------------------------.
+        TAB,  EXLM,    AT,  HASH,   DLR,  PERC,                   CIRC,  AMPR,  ASTR,  LPRN,  RPRN,  BSPC,\
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+       LCTL, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,                   MINS,   EQL,  LCBR,  RCBR,  PIPE,   GRV,\
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+       LSFT, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,                   UNDS,  PLUS,  LBRC,  RBRC,  BSLS,  TILD,\
+  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
+                                  GUIEI, LOWER,   SPC,      ENT, RAISE, ALTKN \
+                              //`--------------------'  `--------------------'
+  ),
+
+  [_ADJUST] = LAYOUT_kc( \
+  //,-----------------------------------------.                ,-----------------------------------------.
+        RST,  LRST, XXXXX, XXXXX, XXXXX, XXXXX,                  XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+       LTOG,  LHUI,  LSAI,  LVAI, XXXXX, XXXXX,                  XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+       LMOD,  LHUD,  LSAD,  LVAD, XXXXX, XXXXX,                  XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
+  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
+                                  GUIEI, LOWER,   SPC,      ENT, RAISE, ALTKN \
+                              //`--------------------'  `--------------------'
+  )
+};
+
+int RGB_current_mode;
+
+void persistent_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+// Setting ADJUST layer RGB back to default
+void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
+  if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
+    layer_on(layer3);
+  } else {
+    layer_off(layer3);
+  }
+}
+
+void matrix_init_user(void) {
+    #ifdef RGBLIGHT_ENABLE
+      RGB_current_mode = rgblight_config.mode;
+    #endif
+    //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
+    #ifdef SSD1306OLED
+        iota_gfx_init(!has_usb());   // turns on the display
+    #endif
+}
+
+//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
+#ifdef SSD1306OLED
+
+// When add source files to SRC in rules.mk, you can use functions.
+const char *read_layer_state(void);
+const char *read_logo(void);
+void set_keylog(uint16_t keycode, keyrecord_t *record);
+const char *read_keylog(void);
+const char *read_keylogs(void);
+
+// const char *read_mode_icon(bool swap);
+// const char *read_host_led_state(void);
+// void set_timelog(void);
+// const char *read_timelog(void);
+
+void matrix_scan_user(void) {
+   iota_gfx_task();
+}
+
+void matrix_render_user(struct CharacterMatrix *matrix) {
+  if (is_master) {
+    // If you want to change the display of OLED, you need to change here
+    matrix_write_ln(matrix, read_layer_state());
+    matrix_write_ln(matrix, read_keylog());
+    matrix_write_ln(matrix, read_keylogs());
+    //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
+    //matrix_write_ln(matrix, read_host_led_state());
+    //matrix_write_ln(matrix, read_timelog());
+  } else {
+    matrix_write(matrix, read_logo());
+  }
+}
+
+void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
+  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+    memcpy(dest->display, source->display, sizeof(dest->display));
+    dest->dirty = true;
+  }
+}
+
+void iota_gfx_task_user(void) {
+  struct CharacterMatrix matrix;
+  matrix_clear(&matrix);
+  matrix_render_user(&matrix);
+  matrix_update(&display, &matrix);
+}
+#endif//SSD1306OLED
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  if (record->event.pressed) {
+#ifdef SSD1306OLED
+    set_keylog(keycode, record);
+#endif
+    // set_timelog();
+  }
+
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        persistent_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+    case ADJUST:
+        if (record->event.pressed) {
+          layer_on(_ADJUST);
+        } else {
+          layer_off(_ADJUST);
+        }
+        return false;
+    case RGB_MOD:
+      #ifdef RGBLIGHT_ENABLE
+        if (record->event.pressed) {
+          rgblight_mode(RGB_current_mode);
+          rgblight_step();
+          RGB_current_mode = rgblight_config.mode;
+        }
+      #endif
+      return false;
+    case RGBRST:
+      #ifdef RGBLIGHT_ENABLE
+        if (record->event.pressed) {
+          eeconfig_update_rgblight_default();
+          rgblight_enable();
+          RGB_current_mode = rgblight_config.mode;
+        }
+      #endif
+      break;
+  }
+  return true;
+}

keyboards/crkbd/keymaps/foostan/rules.mk

@@ -0,0 +1,10 @@
+
+# If you want to change the display of OLED, you need to change here
+SRC +=  ./lib/glcdfont.c \
+        ./lib/rgb_state_reader.c \
+        ./lib/layer_state_reader.c \
+        ./lib/logo_reader.c \
+        ./lib/keylogger.c \
+        # ./lib/mode_icon_reader.c \
+        # ./lib/host_led_state_reader.c \
+        # ./lib/timelogger.c \

keyboards/donutcables/budget96/config.h

@@ -36,6 +36,5 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
 
-#define NO_BACKLIGHT_CLOCK
 #define BACKLIGHT_LEVELS 1
 #define RGBLIGHT_ANIMATIONS

keyboards/facew/config.h

@@ -36,6 +36,5 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
 
-#define NO_BACKLIGHT_CLOCK
 #define BACKLIGHT_LEVELS 1
 #define RGBLIGHT_ANIMATIONS

keyboards/fc660c/keymaps/siroleo/README.md

@@ -6,3 +6,4 @@ Emulates original keymap with modifications for:
 - Grave key(s)
 - Reset on the function layer
 - Mouse keys ala Tada68
+- A layer for playing with Colemak

keyboards/fc660c/keymaps/siroleo/keymap.c

@@ -16,6 +16,21 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include QMK_KEYBOARD_H
 
+enum siroleo_layers
+{
+    _QWERTY,
+    _COLEMAK,
+    _FNM
+};
+
+enum siroleo_keycodes
+{
+    QWERTY = SAFE_RANGE,
+    COLEMAK
+};
+
+#define FNM MO(_FNM)
+
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* BASE layer: Default Layer
    * ,--------------------------------------------------------------------------------------------------.
@@ -30,12 +45,32 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * | Ctrl  | Alt   | Gui  |               Space                | Fn  | Ctrl | Alt   | Left| Down|Right|
    * `--------------------------------------------------------------------------------------------------´
    */
-  [0] = LAYOUT(
-        KC_ESC, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL, KC_BSPC,     KC_GRV,
-        KC_TAB, KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,KC_BSLS,     KC_DEL,
-        KC_GRV ,KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,     KC_ENT,
-        KC_LSFT,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,KC_RSFT,     KC_UP,
-        KC_LCTL,KC_LALT,KC_LGUI,          KC_SPC,                       MO(1),KC_RCTL,KC_RALT,      KC_LEFT,KC_DOWN,KC_RGHT
+  [_QWERTY] = LAYOUT(
+        KC_GESC, KC_1,   KC_2,   KC_3,  KC_4,  KC_5,  KC_6,  KC_7,  KC_8,   KC_9,  KC_0,   KC_MINS,KC_EQL, KC_BSPC,    KC_GRV,
+        KC_TAB,  KC_Q,   KC_W,   KC_E,  KC_R,  KC_T,  KC_Y,  KC_U,  KC_I,   KC_O,  KC_P,   KC_LBRC,KC_RBRC,KC_BSLS,    KC_DEL,
+        KC_GRV , KC_A,   KC_S,   KC_D,  KC_F,  KC_G,  KC_H,  KC_J,  KC_K,   KC_L,  KC_SCLN,KC_QUOT,     KC_ENT,
+        KC_LSFT, KC_Z,   KC_X,   KC_C,  KC_V,  KC_B,  KC_N,  KC_M,  KC_COMM,KC_DOT,KC_SLSH,KC_RSFT,     KC_UP,
+        KC_LCTL, KC_LALT,KC_LGUI,          KC_SPC,                      FNM,KC_RCTL,KC_RALT,    KC_LEFT,KC_DOWN,KC_RGHT
+    ),
+    /* Colemak Layer
+   * ,--------------------------------------------------------------------------------------------------.
+   * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  | Backspace |  | `   |
+   * |-----------------------------------------------------------------------------------------+  +-----+
+   * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |  Bksp  |  | Del |
+   * |-----------------------------------------------------------------------------------------+  +-----+
+   * | `       |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
+   * |--------------------------------------------------------------------------------------------+
+   * | Shift      |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  | Shift       | Up  |
+   * +--------------------------------------------------------------------------------------------+-----+
+   * | Ctrl  | Alt   | Gui  |               Space                | Fn  | Ctrl | Alt   | Left| Down|Right|
+   * `--------------------------------------------------------------------------------------------------´
+   */
+  [_COLEMAK] = LAYOUT(
+        KC_GESC, KC_1,   KC_2,   KC_3,  KC_4,  KC_5,  KC_6,  KC_7,  KC_8,   KC_9,  KC_0,   KC_MINS,KC_EQL, KC_BSPC,    KC_GRV,
+        KC_TAB,  KC_Q,   KC_W,   KC_F,  KC_P,  KC_G,  KC_J,  KC_L,  KC_U,   KC_Y,  KC_SCLN,KC_LBRC,KC_RBRC,KC_BSLS,    KC_DEL,
+        KC_GRV , KC_A,   KC_R,   KC_S,  KC_T,  KC_D,  KC_H,  KC_N,  KC_E,   KC_I,  KC_O   ,KC_QUOT,     KC_ENT,
+        KC_LSFT, KC_Z,   KC_X,   KC_C,  KC_V,  KC_B,  KC_K,  KC_M,  KC_COMM,KC_DOT,KC_SLSH,KC_RSFT,     KC_UP,
+        KC_LCTL, KC_LALT,KC_LGUI,          KC_SPC,                      FNM,KC_RCTL,KC_RALT,    KC_LEFT,KC_DOWN,KC_RGHT
     ),
    /* FN layer
    * ,--------------------------------------------------------------------------------------------------.
@@ -50,11 +85,27 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |       | Reset |      |                                    |      |      |      | MsL | MsD | MsR |
    * `--------------------------------------------------------------------------------------------------´
    */
-  [1] = LAYOUT(
+  [_FNM] = LAYOUT(
         KC_GRV, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, KC_MUTE,     KC_VOLU,
-        _______,_______,_______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK,KC_PAUS,_______,_______,_______,     KC_VOLD,
-        _______,_______,_______,_______,_______,_______,_______,_______,KC_HOME,KC_PGUP,_______,_______,     _______,
+        _______,_______,_______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK,KC_PAUS,_______,_______,  RESET,     KC_VOLD,
+        _______,_______,_______, QWERTY,COLEMAK,_______,_______,_______,KC_HOME,KC_PGUP,_______,_______,     _______,
         _______,_______,_______,_______,_______,_______,_______,_______,KC_END, KC_PGDN,_______,KC_BTN1,     KC_MS_U,
-        _______,  RESET,_______,                _______,                MO(1),  _______,_______,       KC_MS_L,KC_MS_D,KC_MS_R
+        _______,_______,_______,                _______,               _______,_______,_______,       KC_MS_L,KC_MS_D,KC_MS_R
     )
 };
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+    case COLEMAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_COLEMAK);
+      }
+      return false;
+  }
+  return true;
+}

keyboards/ft/mars80/config.h

@@ -38,7 +38,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 #define DEBOUNCE 5
 
-#define NO_BACKLIGHT_CLOCK
 #define BACKLIGHT_LEVELS 1
 #define RGBLIGHT_ANIMATIONS
 

keyboards/gergo/keymaps/drashna/keymap.c

@@ -9,7 +9,7 @@
 #include QMK_KEYBOARD_H
 #include "drashna.h"
 
-
+// clang-format off
 #define LAYOUT_gergo_base( \
     K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
     K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \
@@ -111,3 +111,4 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         ),
 
     */
+// clang-format on

keyboards/gray_studio/space65/space65.c

@@ -19,6 +19,7 @@ void matrix_init_kb(void) {
 	// put your keyboard start-up code here
 	// runs once when the firmware starts up
 
+	setPinOutput(E6);
 	matrix_init_user();
 }
 
@@ -39,9 +40,9 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
 void led_set_kb(uint8_t usb_led) {
 	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
   if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-    writePinHigh(E6);
-  } else {
     writePinLow(E6);
+  } else {
+    writePinHigh(E6);
   }
 
 	led_set_user(usb_led);

keyboards/grid600/press/config.h

@@ -0,0 +1,78 @@
+/*
+Copyright 2019 mechmerlin
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x7539
+#define DEVICE_VER      0x0005
+#define MANUFACTURER    Grid
+#define PRODUCT         PRESS
+#define DESCRIPTION     Top module for Grid 600
+
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 4
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { F0 }
+#define MATRIX_COL_PINS { F1, F4, F5, F6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+
+#define RGB_DI_PIN B6
+#ifdef RGB_DI_PIN
+  #define RGBLED_NUM 4
+  #define RGBLIGHT_HUE_STEP 10
+  #define RGBLIGHT_SAT_STEP 17
+  #define RGBLIGHT_VAL_STEP 17
+  #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+  #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+  #define RGBLIGHT_ANIMATIONS
+/*== customize breathing effect ==*/
+  /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+  #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+  /*==== use exp() and sin() ====*/
+  #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+  #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE

keyboards/grid600/press/info.json

@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "Grid 600 Type 05 PRESS Cover Module", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "width": 4, 
+    "height": 1, 
+    "layouts": {
+        "LAYOUT": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}]
+        }
+    }
+}

keyboards/grid600/press/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2019 mechmerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/grid600/press/keymaps/default/keymap.c

@@ -1,4 +1,4 @@
-/* Copyright 2018 Jarred Steenvoorden
+/* Copyright 2019 mechmerlin
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -13,22 +13,22 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-
-#include "planck.h"
-#include "jarred.h"
+#include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [_QW] = LAYOUT_planck_grid_wrapper(QWERTY_4x12),
-    [_GAME] = LAYOUT_planck_grid_wrapper(GAME_4x12),
-    [_LW] = LAYOUT_planck_grid_wrapper(LOWER_4x12),
-    [_NV] = LAYOUT_planck_grid_wrapper(NAV_4x12),
-    [_NP] = LAYOUT_planck_grid_wrapper(NUMPAD_4x12),
-    [_MS] = LAYOUT_planck_grid_wrapper(MOUSE_4x12)
+  [0] = LAYOUT( /* Base */
+    KC_G,  KC_R,  KC_I, KC_D
+  ),
 };
 
-#ifdef RGB_MATRIX_H
-void rgb_matrix_indicators_user(void) {
-    // Disable light in middle of 2U position
-    rgb_matrix_set_color(42, 0, 0, 0);
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
 }
-#endif

keyboards/grid600/press/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for grid

keyboards/grid600/press/press.c

@@ -0,0 +1,16 @@
+/* Copyright 2019 mechmerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "press.h"

keyboards/grid600/press/press.h

@@ -0,0 +1,32 @@
+/* Copyright 2019 mechmerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+	K00, K01, K02, K03 \
+) { \
+	{ K00,   K01,   K02,   K03 }  \
+}

keyboards/grid600/press/readme.md

@@ -0,0 +1,18 @@
+# Grid 600 Type 05 "PRESS" Cover Module
+
+Cover module for Grid 600 Keyboard with 4 keys.
+
+Code for the module was originally located at [gridishere's QMK fork](https://github.com/gridishere/qmk_firmware/tree/master/keyboards/grid/gridmod5).  
+
+Please keep in mind that this is actually a separate keyboard from the one installed in the Grid 600. 
+Functionality such as layer changes and light modifications triggered on one PCB will not affect the other.  
+
+Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)  
+Hardware Supported: Grid 600 Type 05 "PRESS" cover module.   
+Hardware Availability: [zFrontier](https://en.zfrontier.com/products/grid600s)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make grid600/press:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/grid600/press/rules.mk

@@ -0,0 +1,80 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)

keyboards/grid600/readme.md

@@ -0,0 +1,7 @@
+#  Grid 600 Cover Modules
+
+The Grid 600 is a tray mount 60% case supporting most standard 60% PCBs. 
+
+A unique feature of the Grid 600 is that it has five different cover modules that not only include USB C pass through, but also have functions such as RGB or additional macro keys. 
+
+This is a collection of some of the programmable modules available for this enclosure. 

keyboards/hadron/ver3/keymaps/xulkal/config.h

@@ -0,0 +1 @@
+#pragma once

keyboards/hadron/ver3/keymaps/xulkal/keymap.c

@@ -0,0 +1,73 @@
+#include QMK_KEYBOARD_H
+#include "xulkal.h"
+
+#define EXPAND_LAYOUT(...) LAYOUT(__VA_ARGS__)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Qwerty Layout
+     * ,-----------------------------------------------------------------------------------.
+     * | GESC |   1  |   2  |  3   |  4   |  5   |  6   |  7   |  8   |  9   |  0   | BkSp |
+     * |------+------+------+------+------+------|------+------+------+------+------+------+--------------------.
+     * | Tab  |   Q  |   W  |  E   |  R   |  T   |  Y   |  U   |  I   |  O   |  P   |   \  |  7   |  8   |  9   |
+     * |------+------+------+------+------+------|------+------+------+------+------+------+------+------+------|
+     * |FN(CAPS)| A  |   S  |   D  |  F   |  G   |  H   |  J   |  K   |  L   |  ;   | Enter|  4   |  5   |  6   |
+     * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+     * | Sft[ |   Z  |   X  |   C  |  V   |  B   |  N   |  M   |  ,   |  .   |  /   | Sft] |  1   |  2   |  3   |
+     * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+     * | Ctl- |  Win | LOWER| RAISE| Alt  | Space| Space| Left |  Up  | Down | Right| Ctl= |  0   |  .   |  =   |
+     * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------'
+     */
+    [_QWERTY] = EXPAND_LAYOUT( \
+        _________________QWERTY_L1_________________, _________________QWERTY_R1_________________,\
+        _________________QWERTY_L2_________________, _________________QWERTY_R2_________________, KC_P7,   KC_P8,   KC_P9, \
+        _________________QWERTY_L3_________________, _________________QWERTY_R3_________________, KC_P4,   KC_P5,   KC_P6, \
+        _________________QWERTY_L4_________________, _________________QWERTY_R4_________________, KC_P1,   KC_P2,   KC_P3, \
+        _________________QWERTY_L5_________________, _________________QWERTY_R5_________________, KC_P0,   KC_DOT,  KC_EQL \
+    ),
+
+#ifndef GAMELAYER_DISABLE
+    [_GAME] = EXPAND_LAYOUT( \
+        ___________________GAME_L1_________________, ___________________GAME_R1_________________, \
+        ___________________GAME_L2_________________, ___________________GAME_R2_________________, _______, _______, _______, \
+        ___________________GAME_L3_________________, ___________________GAME_R3_________________, _______, _______, _______, \
+        ___________________GAME_L4_________________, ___________________GAME_R4_________________, _______, _______, _______, \
+        ___________________GAME_L5_________________, ___________________GAME_R5_________________, _______, _______, _______ \
+    ),
+#endif
+
+    [_LOWER] =  EXPAND_LAYOUT( \
+        __________________LOWER_L1_________________, __________________LOWER_R1_________________, \
+        __________________LOWER_L2_________________, __________________LOWER_R2_________________, _______, _______, _______, \
+        __________________LOWER_L3_________________, __________________LOWER_R3_________________, _______, _______, _______, \
+        __________________LOWER_L4_________________, __________________LOWER_R4_________________, _______, _______, _______, \
+        __________________LOWER_L5_________________, __________________LOWER_R5_________________, _______, _______, _______ \
+    ),
+
+    [_RAISE] = EXPAND_LAYOUT( \
+        __________________RAISE_L1_________________, __________________RAISE_R1_________________, \
+        __________________RAISE_L2_________________, __________________RAISE_R2_________________, _______, _______, _______, \
+        __________________RAISE_L3_________________, __________________RAISE_R3_________________, _______, _______, _______, \
+        __________________RAISE_L4_________________, __________________RAISE_R4_________________, _______, _______, _______, \
+        __________________RAISE_L5_________________, __________________RAISE_R5_________________, _______, _______, _______ \
+    ),
+
+#ifdef TRILAYER_ENABLED
+    [_ADJUST] = EXPAND_LAYOUT( \
+        _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, \
+        _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, _______, _______, _______, \
+        _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, _______, _______, _______, \
+        _________________ADJUST_L4_________________, _________________ADJUST_R4_________________, _______, _______, _______, \
+        _________________ADJUST_L5_________________, _________________ADJUST_R5_________________, _______, _______, _______ \
+    ),
+#endif
+};
+
+bool music_mask_user(uint16_t keycode) {
+  switch (keycode) {
+    case RAISE:
+    case LOWER:
+      return false;
+    default:
+      return true;
+  }
+}

keyboards/hadron/ver3/keymaps/xulkal/rules.mk

@@ -0,0 +1,4 @@
+# Overridden build options
+
+COMMAND_ENABLE = no
+ENCODER_ENABLER = no

keyboards/handwired/jotanck/keymaps/default/keymap.c

@@ -13,11 +13,14 @@ extern keymap_config_t keymap_config;
 #define _QWERTY   0
 #define _LOWER    1
 #define _RAISE    2
-#define _ADJUST   3
 
 #define LOWER MO(_LOWER)
 #define RAISE MO(_RAISE)
 
+static bool is_ctl_pressed;
+static bool is_esc_pressed;
+static bool is_bspc_pressed;
+
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 /* Qwerty
@@ -73,20 +76,47 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______, _______, _______, _______,
     _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END
 ),
-
-/* Adjust */
-[_ADJUST] = LAYOUT_ortho_4x12 (
-    _______, RESET,   _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______,
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
-),    
+    
 };
 
 uint32_t layer_state_set_user(uint32_t state) {
-  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+  #ifdef JOTANCK_LEDS
+  switch (biton32(state)) {
+  case _LOWER:
+    writePinHigh(JOTANCK_LED1);
+    writePinLow(JOTANCK_LED2);
+    break;
+  case _RAISE:
+    writePinLow(JOTANCK_LED1);
+    writePinHigh(JOTANCK_LED2);
+    break;
+  default:
+    writePinLow(JOTANCK_LED1);
+    writePinLow(JOTANCK_LED2);
+    break; 
+  };
+  #endif
+  return state;
 }
 
-void matrix_init_user(void) {
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case KC_LCTL:
+      is_ctl_pressed = record->event.pressed;
+      break;
+    case KC_ESC:
+      is_esc_pressed = record->event.pressed;
+      break;
+    case KC_BSPC:
+      is_bspc_pressed = record->event.pressed;
+      break;
+  };
+  return true;
+}
+
+void matrix_scan_user(void) {
+  if (is_ctl_pressed && is_esc_pressed && is_bspc_pressed) {
+    reset_keyboard();
+  }
 }
 

keyboards/handwired/jotanck/readme.md

@@ -35,4 +35,6 @@ Make example for this keyboard (after setting up your build environment):
 
 ![Default Keymap](https://i.imgur.com/xh7Dmd7.png)
 
+To reset the keyboard press Ctrl+Esc+BackSpace
+
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/handwired/splittest/config.h

@@ -33,12 +33,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROWS 2
 #define MATRIX_COLS 1
 
-// wiring of each half
-#define MATRIX_ROW_PINS { B3 }
-#define MATRIX_COL_PINS { B6 }
-#define SPLIT_HAND_PIN F6
-#define SOFT_SERIAL_PIN D1
-
 /* define if matrix has ghost */
 //#define MATRIX_HAS_GHOST
 
@@ -51,7 +45,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LOCKING_RESYNC_ENABLE
 
 /* ws2812 RGB LED */
-#define RGB_DI_PIN D3
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 12
 #define RGBLED_SPLIT { 6, 6 }

keyboards/handwired/splittest/promicro/config.h

@@ -0,0 +1,28 @@
+/* Copyright 2019
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+// wiring of each half
+#define MATRIX_ROW_PINS { B3 }
+#define MATRIX_COL_PINS { B6 }
+#define SPLIT_HAND_PIN F6
+#define SOFT_SERIAL_PIN D1
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3

keyboards/handwired/splittest/promicro/readme.md

@@ -0,0 +1,11 @@
+# Pro Micro splittest
+
+To trigger keypress, short together pins *B3* and *B6* (marked on the PCB as *14* and *10*).
+
+## Wiring
+- Add switches to both Pro Micros across B3 and B6 pins
+- Add pull-up resistor to left side between VCC and F6
+- Add pull-down resistors to right side between GND and F6
+- Connect the following pins on both sides together: D0, D1, GND, VCC
+- Add I2C 4.7kOhm resistors between D0 and VCC, and D1 and VCC
+- Wire Di of RGB strip for each half to D3

keyboards/handwired/splittest/promicro/rules.mk

@@ -0,0 +1,58 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096

keyboards/handwired/splittest/readme.md

@@ -4,7 +4,10 @@ Split Tester
 A two-switch tester built using two Pro Micros, mainly intended to test RGB on split keyboards. Seen here: https://www.instagram.com/p/BvCPNzynwrV/
 
 Keyboard Maintainer: [Bakingpy/nooges](https://github.com/nooges)  
-Hardware Supported: Pro Micro   
+Hardware Supported: Pro Micro, Teensy 2.0  
+Hardware Availability: 
+
+**See each individual board for pin infomation**
 
 Make example for this keyboard (after setting up your build environment):
 
@@ -15,12 +18,3 @@ Example of flashing this keyboard:
     make handwired/splittest:default:avrdude
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
-
-Wiring
-------
-- Add switches to both Pro Micros across B3 and B6 pins
-- Add pull-up resistor to left side between VCC and F6
-- Add pull-down resistors to right side between GND and F6
-- Connect the following pins on both sides together: D0, D1, GND, VCC
-- Add I2C 4.7kOhm resistors between D0 and VCC, and D1 and VCC
-- Wire Di of RGB strip for each half to D2

keyboards/handwired/splittest/rules.mk

@@ -1,47 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Bootloader
-#     This definition is optional, and if your keyboard supports multiple bootloaders of
-#     different sizes, comment this out, and the correct address will be loaded
-#     automatically (+60). See bootloader.mk for all options.
-BOOTLOADER = caterina
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
 # Build Options
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
@@ -63,3 +19,5 @@ RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
 SPLIT_KEYBOARD = yes
+
+DEFAULT_FOLDER = handwired/splittest/promicro

keyboards/handwired/splittest/teensy_2/config.h

@@ -0,0 +1,31 @@
+/* Copyright 2019
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+// wiring of each half
+#define MATRIX_ROW_PINS { F5 }
+#define MATRIX_COL_PINS { F7 }
+#define SPLIT_HAND_PIN F0
+#define SOFT_SERIAL_PIN D1
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+
+// required for teensy slave otherwise it "locks up" during startup
+#define NO_USB_STARTUP_CHECK

keyboards/handwired/splittest/teensy_2/readme.md

@@ -0,0 +1,11 @@
+# Teensy 2.0 splittest
+
+To trigger keypress, short together pins *F5* and *F7*
+
+## Wiring
+- Add switches to both Teensy 2s across F5 and F7 pins
+- Add pull-up resistor to left side between VCC and F0
+- Add pull-down resistors to right side between GND and F0
+- Connect the following pins on both sides together: D0, D1, GND, VCC
+- Add I2C 4.7kOhm resistors between D0 and VCC, and D1 and VCC
+- Wire Di of RGB strip for each half to D3

keyboards/handwired/splittest/teensy_2/rules.mk

@@ -0,0 +1,58 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = halfkay
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096

keyboards/handwired/splittest/teensy_2/teensy_2.c

@@ -0,0 +1,14 @@
+#include QMK_KEYBOARD_H
+
+bool is_keyboard_master(void) {
+    // TODO: replace this override once USB host detection is implemented
+    // SPLIT_HAND_PIN Combined with MASTER_LEFT or MASTER_RIGHT, gives a crude
+    // way to force teensy to run as slave/master
+    setPinInput(SPLIT_HAND_PIN);
+
+#if defined(MASTER_RIGHT)
+    return !readPin(SPLIT_HAND_PIN);
+#else
+    return readPin(SPLIT_HAND_PIN);
+#endif
+}

keyboards/hs60/v2/keymaps/ansi_via/rules.mk

@@ -1,6 +1,6 @@
 # project specific files
-SRC =	keyboards/zeal60/zeal60.c \
-		keyboards/zeal60/rgb_backlight.c \
+SRC =	keyboards/wilba_tech/wt_main.c \
+		keyboards/wilba_tech/wt_rgb_backlight.c \
 		drivers/issi/is31fl3733.c \
 		quantum/color.c \
 		drivers/arm/i2c_master.c

keyboards/hs60/v2/keymaps/default_via/rules.mk

@@ -1,6 +1,6 @@
 # project specific files
-SRC =	keyboards/zeal60/zeal60.c \
-		keyboards/zeal60/rgb_backlight.c \
+SRC =	keyboards/wilba_tech/wt_main.c \
+		keyboards/wilba_tech/wt_rgb_backlight.c \
 		drivers/issi/is31fl3733.c \
 		quantum/color.c \
 		drivers/arm/i2c_master.c

keyboards/hs60/v2/keymaps/goatmaster/rules.mk

@@ -1,6 +1,6 @@
 # project specific files
-SRC =	keyboards/zeal60/zeal60.c \
-		keyboards/zeal60/rgb_backlight.c \
+SRC =	keyboards/wilba_tech/wt_main.c \
+		keyboards/wilba_tech/wt_rgb_backlight.c \
 		drivers/issi/is31fl3733.c \
 		quantum/color.c \
 		drivers/arm/i2c_master.c

keyboards/hs60/v2/keymaps/hhkb_via/rules.mk

@@ -1,6 +1,6 @@
 # project specific files
-SRC =	keyboards/zeal60/zeal60.c \
-		keyboards/zeal60/rgb_backlight.c \
+SRC =	keyboards/wilba_tech/wt_main.c \
+		keyboards/wilba_tech/wt_rgb_backlight.c \
 		drivers/issi/is31fl3733.c \
 		quantum/color.c \
 		drivers/arm/i2c_master.c

keyboards/hs60/v2/keymaps/iso_andys8/rules.mk

@@ -1,6 +1,6 @@
 # project specific files
-SRC =	keyboards/zeal60/zeal60.c \
-		keyboards/zeal60/rgb_backlight.c \
+SRC =	keyboards/wilba_tech/wt_main.c \
+		keyboards/wilba_tech/wt_rgb_backlight.c \
 		drivers/issi/is31fl3733.c \
 		quantum/color.c \
 		drivers/arm/i2c_master.c

keyboards/hs60/v2/keymaps/stanrc85/rules.mk

@@ -1,6 +1,6 @@
 # project specific files
-SRC =	keyboards/zeal60/zeal60.c \
-        keyboards/zeal60/rgb_backlight.c \
+SRC =	keyboards/wilba_tech/wt_main.c \
+        keyboards/wilba_tech/wt_rgb_backlight.c \
 	    drivers/issi/is31fl3733.c \
 	    quantum/color.c \
 	    drivers/arm/i2c_master.c

keyboards/hs60/v2/keymaps/win_osx_dual/rules.mk

@@ -1,6 +1,6 @@
 # project specific files
-SRC =	keyboards/zeal60/zeal60.c \
-		keyboards/zeal60/rgb_backlight.c \
+SRC =	keyboards/wilba_tech/wt_main.c \
+		keyboards/wilba_tech/wt_rgb_backlight.c \
 		drivers/issi/is31fl3733.c \
 		quantum/color.c \
 		drivers/arm/i2c_master.c

keyboards/hs60/v2/rules.mk

@@ -1,6 +1,6 @@
 # project specific files
-SRC =	keyboards/zeal60/zeal60.c \
-		keyboards/zeal60/rgb_backlight.c \
+SRC =	keyboards/wilba_tech/wt_main.c \
+		keyboards/wilba_tech/wt_rgb_backlight.c \
 		drivers/issi/is31fl3733.c \
 		quantum/color.c \
 		drivers/arm/i2c_master.c

keyboards/hs60/v2/v2.h

@@ -18,8 +18,8 @@
 #define XXX KC_NO
 
 #include "quantum.h"
-#include "../../zeal60/rgb_backlight_keycodes.h"
-#include "../../zeal60/zeal60_keycodes.h"
+#include "../../wilba_tech/wt_rgb_backlight_keycodes.h"
+#include "../../wilba_tech/via_keycodes.h"
 
 // This a shortcut to help you visually see your layout.
 

keyboards/jc65/v32a/config.h

@@ -28,7 +28,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROWS 8
 #define MATRIX_COLS 16
 
-#define NO_BACKLIGHT_CLOCK
 #define BACKLIGHT_LEVELS 1
 #define RGBLED_NUM 16
 #define RGBLIGHT_ANIMATIONS

keyboards/kbdfans/kbd6x/keymaps/konstantin/config.h

@@ -1,4 +1,3 @@
 #pragma once
 
 #define LAYER_FN
-#define SEND_STRING_CLEAN

keyboards/kbdfans/kbd6x/keymaps/konstantin/keymap.c

@@ -10,7 +10,7 @@ enum layers_keymap {
 };
 
 void eeconfig_init_keymap(void) {
-    rgblight_sethsv(MODERN_DOLCH_RED.h, MODERN_DOLCH_RED.s, MODERN_DOLCH_RED.v);
+    rgblight_sethsv(MODERN_DOLCH_RED);
     rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL);
 }
 
@@ -31,6 +31,46 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
     }
 }
 
+static bool skip_caps = false;
+
+static void fn_light(uint32_t state) {
+    if (IS_LAYER_ON_STATE(state, L_FN)) {
+        rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT);
+        rgblight_sethsv_noeeprom(modern_dolch_red.h, modern_dolch_red.s, rgblight_get_val());
+        skip_caps = true;
+    } else {
+        rgblight_config_t saved = { .raw = eeconfig_read_rgblight() };
+        rgblight_sethsv_noeeprom(saved.hue, saved.sat, saved.val);
+        rgblight_mode_noeeprom(saved.mode);
+    }
+    // caps_light will be called automatically after this
+}
+
+static void caps_light(uint8_t usb_led) {
+    if (skip_caps) {
+        skip_caps = false;
+        return;  // Skip calls triggered by the Fn layer turning on
+    }
+    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+        rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT);
+        rgblight_sethsv_noeeprom(modern_dolch_cyan.h, modern_dolch_cyan.s, rgblight_get_val());
+    } else {
+        fn_light(layer_state);  // Caps is off, check if Fn light should be on
+    }
+}
+
+uint32_t layer_state_set_keymap(uint32_t state) {
+    static uint32_t prev_state = L_BASE;
+    if (IS_LAYER_ON_STATE(state, L_FN) != IS_LAYER_ON_STATE(prev_state, L_FN)) {
+        fn_light(state);  // Fn state changed since last time
+    }
+    return prev_state = state;
+}
+
+void led_set_keymap(uint8_t usb_led) {
+    caps_light(usb_led);
+}
+
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* Base layer
      * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐

keyboards/kbdfans/kbd6x/keymaps/konstantin/rules.mk

@@ -1,11 +1,11 @@
-BOOTMAGIC_ENABLE  = no
-COMMAND_ENABLE    = yes
-CONSOLE_ENABLE    = no
-EXTRAKEY_ENABLE   = yes
-MOUSEKEY_ENABLE   = yes
-NKRO_ENABLE       = yes
-TAP_DANCE_ENABLE  = yes
-UNICODEMAP_ENABLE = no
-
-BACKLIGHT_ENABLE = yes
-RGBLIGHT_ENABLE  = yes
+BACKLIGHT_ENABLE   = no
+BOOTMAGIC_ENABLE   = no
+COMMAND_ENABLE     = yes
+CONSOLE_ENABLE     = yes
+EXTRAKEY_ENABLE    = yes
+MOUSEKEY_ENABLE    = yes
+NKRO_ENABLE        = yes
+RGBLIGHT_ENABLE    = yes
+SPACE_CADET_ENABLE = no
+TAP_DANCE_ENABLE   = yes
+UNICODEMAP_ENABLE  = no

keyboards/keebio/ergodicity/config.h

@@ -0,0 +1,233 @@
+/*
+Copyright 2019 Keebio
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xCB10
+#define PRODUCT_ID      0x125F
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Keebio
+#define PRODUCT         Ergodicity
+#define DESCRIPTION     Low-profile ergo keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B0, B1, C7, B6, B4 }
+#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, D7, D6, D4, D3, D2, D1, D0, B7, B3 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+#define BACKLIGHT_PIN B5
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 7
+
+#define RGB_DI_PIN B2
+#ifdef RGB_DI_PIN
+  #define RGBLED_NUM 12
+  #define RGBLIGHT_HUE_STEP 8
+  #define RGBLIGHT_SAT_STEP 8
+  #define RGBLIGHT_VAL_STEP 8
+  #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+  #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+  #define RGBLIGHT_ANIMATIONS
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/keebio/ergodicity/ergodicity.c

@@ -0,0 +1,51 @@
+/* Copyright 2019 Keebio
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "ergodicity.h"
+
+// Optional override functions below.
+// You can leave any or all of these undefined.
+// These are only required if you want to perform custom actions.
+
+/*
+
+void matrix_init_kb(void) {
+  // put your keyboard start-up code here
+  // runs once when the firmware starts up
+
+  matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+  // put your looping keyboard code here
+  // runs every cycle (a lot)
+
+  matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+  // put your per-action keyboard code here
+  // runs for every action, just before processing by the firmware
+
+  return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+  led_set_user(usb_led);
+}
+
+*/

keyboards/keebio/ergodicity/ergodicity.h

@@ -0,0 +1,41 @@
+/* Copyright 2019 Keebio
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    kA1, kA2, kA3, kE3, kA4, kA5, kA6, kA7, kA8, kA9,  kA10, kA11, kA12, kA13, kA15, \
+    kB1, kB2, kB3, kB4, kB5, kB6, kB7, kB8, kB9, kB10, kB11, kB12, kB13, kB14, kB15, \
+    kC1, kC2, kC3, kC4, kC5, kC6, kC7, kC8, kC9, kC10, kC11, kC12, kC13,       kC15, \
+         kD2, kD3, kD4, kD5, kD6, kD7, kD8, kD9, kD10, kD11, kD12, kD13, kD14, kD15, \
+         kE2,      kE4,      kE6, kE7,      kE9,       kE11,                   kE15 \
+) \
+{ \
+    { kA1, kA2, kA3, kA4, kA5, kA6, kA7, kA8, kA9, kA10, kA11, kA12, kA13, KC_NO, kA15 }, \
+    { kB1, kB2, kB3, kB4, kB5, kB6, kB7, kB8, kB9, kB10, kB11, kB12, kB13, kB14, kB15 }, \
+    { kC1, kC2, kC3, kC4, kC5, kC6, kC7, kC8, kC9, kC10, kC11, kC12, kC13, KC_NO, kC15 }, \
+    { KC_NO, kD2, kD3, kD4, kD5, kD6, kD7, kD8, kD9, kD10, kD11, kD12, kD13, kD14, kD15 }, \
+    { KC_NO, kE2, kE3, kE4, KC_NO, kE6, kE7, KC_NO, kE9, KC_NO, kE11, KC_NO, KC_NO, kE15 } \
+}

keyboards/keebio/ergodicity/info.json

@@ -0,0 +1,82 @@
+{
+    "keyboard_name": "Ergodicity",
+    "url": "https://keeb.io",
+    "maintainer": "Keebio",
+    "width": 19.5,
+    "height": 5.25,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"Esc", "x":0.5, "y":0},
+                {"label":"`", "x":1.75, "y":0.25},
+                {"label":"1", "x":2.75, "y":0.25},
+                {"label":"2", "x":3.75, "y":0},
+                {"label":"3", "x":4.75, "y":0.25},
+                {"label":"4", "x":5.75, "y":0.25},
+                {"label":"5", "x":6.75, "y":0.25},
+                {"label":"6", "x":7.75, "y":0.25},
+                {"label":"7", "x":11, "y":0.25},
+                {"label":"8", "x":12, "y":0.25},
+                {"label":"9", "x":13, "y":0.25},
+                {"label":"0", "x":14, "y":0.25},
+                {"label":"-", "x":15, "y":0},
+                {"label":"=", "x":16, "y":0.25},
+                {"label":"Backspace", "x":17, "y":0.25, "w":2},
+
+                {"label":"PgUp", "x":0.25, "y":1},
+                {"label":"Tab", "x":1.5, "y":1.25, "w":1.5},
+                {"label":"Q", "x":3, "y":1.25},
+                {"label":"W", "x":4.25, "y":1.25},
+                {"label":"E", "x":5.25, "y":1.25},
+                {"label":"R", "x":6.25, "y":1.25},
+                {"label":"T", "x":7.25, "y":1.25},
+                {"label":"Y", "x":10.5, "y":1.25},
+                {"label":"U", "x":11.5, "y":1.25},
+                {"label":"I", "x":12.5, "y":1.25},
+                {"label":"O", "x":13.5, "y":1.25},
+                {"label":"P", "x":14.75, "y":1.25},
+                {"label":"[", "x":15.75, "y":1.25},
+                {"label":"]", "x":16.75, "y":1.25},
+                {"label":"Backslash", "x":17.75, "y":1.25, "w":1.5},
+
+                {"label":"PgDn", "x":0, "y":2},
+                {"label":"Caps Lock", "x":1.25, "y":2.25, "w":2},
+                {"label":"A", "x":3.25, "y":2.25},
+                {"label":"S", "x":4.5, "y":2.25},
+                {"label":"D", "x":5.5, "y":2.25},
+                {"label":"F", "x":6.5, "y":2.25},
+                {"label":"G", "x":7.5, "y":2.25},
+                {"label":"H", "x":10.75, "y":2.25},
+                {"label":"J", "x":11.75, "y":2.25},
+                {"label":"K", "x":12.75, "y":2.25},
+                {"label":"L", "x":13.75, "y":2.25},
+                {"label":";", "x":15.25, "y":2.25},
+                {"label":"'", "x":16.25, "y":2.25},
+                {"label":"Enter", "x":17.25, "y":2.25, "w":2},
+
+                {"label":"Shift", "x":1.25, "y":3.25, "w":2.5},
+                {"label":"Z", "x":3.75, "y":3.25},
+                {"label":"X", "x":5, "y":3.25},
+                {"label":"C", "x":6, "y":3.25},
+                {"label":"V", "x":7, "y":3.25},
+                {"label":"B", "x":8, "y":3.25},
+                {"label":"B", "x":10.25, "y":3.25},
+                {"label":"N", "x":11.25, "y":3.25},
+                {"label":"M", "x":12.25, "y":3.25},
+                {"label":",", "x":13.25, "y":3.25},
+                {"label":".", "x":14.75, "y":3.25},
+                {"label":"/", "x":15.75, "y":3.25},
+                {"label":"Shift", "x":16.75, "y":3.25, "w":1.5},
+                {"label":"Fn", "x":18.25, "y":3.25},
+
+                {"label":"Alt", "x":1.25, "y":4.25, "w":1.5},
+                {"label":"Gui", "x":5, "y":4.25, "w":1.5},
+                {"label":"Space", "x":6.5, "y":4.25, "w":2},
+                {"label":"Menu", "x":8.5, "y":4.25},
+                {"label":"Space", "x":10.25, "y":4.25, "w":2.5},
+                {"label":"Alt", "x":12.75, "y":4.25, "w":1.5},
+                {"label":"Fn", "x":17.75, "y":4.25, "w":1.5}
+            ]
+        }
+    }
+}

keyboards/keebio/ergodicity/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2019 Keebio
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/keebio/ergodicity/keymaps/default/keymap.c

@@ -0,0 +1,73 @@
+/* Copyright 2019 Keebio
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+  QMKBEST = SAFE_RANGE,
+  QMKURL
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_ESC,     KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, \
+        KC_PGUP,    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, \
+        KC_PGDN,    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT, \
+                    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1), \
+                    KC_LCTL,          KC_LALT,          KC_SPC,  KC_LGUI,          KC_SPC,           KC_RALT,                            KC_RCTL \
+    ),
+    [1] = LAYOUT(
+        _______,    _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, \
+        RGB_MOD,    _______, _______, _______, KC_UP,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+        BL_STEP,    _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______,          _______, \
+                    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+                    _______,          _______,          _______, _______,          _______,          _______,                            _______ \
+    ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QMKBEST:
+      if (record->event.pressed) {
+        // when keycode QMKBEST is pressed
+        SEND_STRING("QMK is the best thing ever!");
+      } else {
+        // when keycode QMKBEST is released
+      }
+      break;
+    case QMKURL:
+      if (record->event.pressed) {
+        // when keycode QMKURL is pressed
+        SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER));
+      } else {
+        // when keycode QMKURL is released
+      }
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/keebio/ergodicity/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for ergodicity

keyboards/keebio/ergodicity/readme.md

@@ -0,0 +1,15 @@
+# Ergodicity
+
+![ergodicity](imgur.com image replace me!)
+
+A short description of the keyboard/project
+
+Keyboard Maintainer: [nooges/bakingpy](https://github.com/nooges)  
+Hardware Supported: Ergodicity PCB w/ATmega32u4  
+Hardware Availability: [Keebio](https://keeb.io)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make keebio/ergodicity:default:dfu
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).