Enable PWM Support for Planck EZ Indicator Lights (#6473 )

* remove led layer code * enable PWM on STM32F303 * Unusable PWM code * Updated PWM Stuff? * PWM Semi-working * Both LEDs working at the same time * Update names * Add led level functions * Add LED levels and persistent settings * Revert change due to issues with timing related code * Review feedback and minor cleanup
[Keyboard] Add: Initial steamvan firmware code (#6501 )
2025-09-10 17:15:43 +00:00 · 2019-08-13 10:28:12 -07:00 · 2019-08-13 10:26:54 -07:00 · 2019-08-13 10:25:51 -07:00 · 2019-08-13 10:23:14 -07:00 · 2019-08-12 19:57:00 -07:00
423 changed files with 9617 additions and 757 deletions
--- a/bin/qmk
+++ b/bin/qmk
@@ -38,7 +38,7 @@ with open('requirements.txt', 'r') as fd:

 # Figure out our version
 command = ['git', 'describe', '--abbrev=6', '--dirty', '--always', '--tags']
-result = subprocess.run(command, text=True, capture_output=True)
+result = subprocess.run(command, universal_newlines=True, capture_output=True)

 if result.returncode == 0:
    os.environ['QMK_VERSION'] = 'QMK ' + result.stdout.strip()
--- a/docs/config_options.md
+++ b/docs/config_options.md
@@ -76,7 +76,7 @@ This is a C header file that is one of the first things included, and will persi
 * `#define B7_AUDIO`
  * enables audio on pin B7 (duophony is enables if one of B[5-7]\_AUDIO is enabled along with one of C[4-6]\_AUDIO)
 * `#define BACKLIGHT_PIN B7`
-  * pin of the backlight - `B5`, `B6`, `B7` and `C6` (and `D4` on ATmega32A) use hardware PWM, others use software implementation
+  * pin of the backlight
 * `#define BACKLIGHT_LEVELS 3`
  * number of levels your backlight will have (maximum 15 excluding off)
 * `#define BACKLIGHT_BREATHING`
@@ -248,6 +248,9 @@ There are a few different ways to set handedness for split keyboards (listed in
 * `#define MATRIX_COL_PINS_RIGHT { <col pins> }`
  * If you want to specify a different pinout for the right half than the left half, you can define `MATRIX_ROW_PINS_RIGHT`/`MATRIX_COL_PINS_RIGHT`. Currently, the size of `MATRIX_ROW_PINS` must be the same as `MATRIX_ROW_PINS_RIGHT` and likewise for the definition of columns.

+* `#define DIRECT_PINS_RIGHT { { F1, F0, B0, C7 }, { F4, F5, F6, F7 } }`
+  * If you want to specify a different direct pinout for the right half than the left half, you can define `DIRECT_PINS_RIGHT`. Currently, the size of `DIRECT_PINS` must be the same as `DIRECT_PINS_RIGHT`.
+
 * `#define RGBLED_SPLIT { 6, 6 }`
  * See [RGB Light Configuration](#rgb-light-configuration)

--- a/docs/faq_build.md
+++ b/docs/faq_build.md
@@ -19,7 +19,11 @@ Note that running `make` with `sudo` is generally ***not*** a good idea, and you

 ### Linux `udev` Rules
 On Linux, you'll need proper privileges to access the MCU. You can either use
-`sudo` when flashing firmware, or place these files in `/etc/udev/rules.d/`.
+`sudo` when flashing firmware, or place these files in `/etc/udev/rules.d/`. Once added run the following:
+```console
+sudo udevadm control --reload-rules
+sudo udevadm trigger
+```

 **/etc/udev/rules.d/50-atmel-dfu.rules:**
 ```
@@ -43,6 +47,28 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666"
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="1c11", MODE:="0666"
 ```

+**/etc/udev/rules.d/55-catalina.rules:**
+```
+# ModemManager should ignore the following devices
+ATTRS{idVendor}=="2a03", ENV{ID_MM_DEVICE_IGNORE}="1"
+ATTRS{idVendor}=="2341", ENV{ID_MM_DEVICE_IGNORE}="1"
+```
+
+**Note:** ModemManager filtering only works when not in strict mode, the following commands can update that settings:
+```console
+sudo sed -i 's/--filter-policy=strict/--filter-policy=default/' /lib/systemd/system/ModemManager.service
+sudo systemctl daemon-reload
+sudo systemctl restart ModemManager
+```
+
+**/etc/udev/rules.d/56-dfu-util.rules:**
+```
+# stm32duino
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1eaf", ATTRS{idProduct}=="0003", MODE:="0666"
+# Generic stm32
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="df11", MODE:="0666"
+```
+
 ### Serial device is not detected in bootloader mode on Linux
 Make sure your kernel has appropriate support for your device. If your device uses USB ACM, such as
 Pro Micro (Atmega32u4), make sure to include `CONFIG_USB_ACM=y`. Other devices may require `USB_SERIAL` and any of its sub options.
--- a/docs/feature_backlight.md
+++ b/docs/feature_backlight.md
@@ -30,32 +30,31 @@ You should then be able to use the keycodes below to change the backlight level.

 This feature is distinct from both the [RGB underglow](feature_rgblight.md) and [RGB matrix](feature_rgb_matrix.md) features as it usually allows for only a single colour per switch, though you can obviously use multiple different coloured LEDs on a keyboard.

-Hardware PWM is only supported on certain pins of the MCU, so if the backlighting is not connected to one of them, a software PWM implementation triggered by hardware timer interrupts will be used.
-
 Hardware PWM is supported according to the following table:

-| Backlight Pin | Hardware timer          |
-|---------------|-------------------------|
-|`B5`           | Timer 1                 |
-|`B6`           | Timer 1                 |
-|`B7`           | Timer 1                 |
-|`C6`           | Timer 3                 |
-|`D4`           | Timer 1 (ATmega32A only)|
-| other         | Software PWM            |
+|Backlight Pin|AT90USB64/128|ATmega16/32U4|ATmega16/32U2|ATmega32A|
+|-------------|-------------|-------------|-------------|---------|
+|`B5`         |Timer 1      |Timer 1      |             |         |
+|`B6`         |Timer 1      |Timer 1      |             |         |
+|`B7`         |Timer 1      |Timer 1      |Timer 1      |         |
+|`C4`         |Timer 3      |             |             |         |
+|`C5`         |Timer 3      |             |Timer 1      |         |
+|`C6`         |Timer 3      |Timer 3      |Timer 1      |         |
+|`D4`         |             |             |             |Timer 1  |
+|`D5`         |             |             |             |Timer 1  |

-The [audio feature](feature_audio.md) also uses hardware timers. Please refer to the following table to know what hardware timer the software PWM will use depending on the audio configuration:
+All other pins will use software PWM. If the [Audio](feature_audio.md) feature is disabled or only using one timer, the backlight PWM can be triggered by a hardware timer:

-| Audio Pin(s) | Audio Timer | Software PWM Timer |
-|--------------|-------------|--------------------|
-| `C4`         | Timer 3     | Timer 1            |
-| `C5`         | Timer 3     | Timer 1            |
-| `C6`         | Timer 3     | Timer 1            |
-| `B5`         | Timer 1     | Timer 3            |
-| `B6`         | Timer 1     | Timer 3            |
-| `B7`         | Timer 1     | Timer 3            |
-| `Bx` & `Cx`  | Timer 1 & 3 | None               |
+|Audio Pin|Audio Timer|Software PWM Timer|
+|---------|-----------|------------------|
+|`C4`     |Timer 3    |Timer 1           |
+|`C5`     |Timer 3    |Timer 1           |
+|`C6`     |Timer 3    |Timer 1           |
+|`B5`     |Timer 1    |Timer 3           |
+|`B6`     |Timer 1    |Timer 3           |
+|`B7`     |Timer 1    |Timer 3           |

-When all timers are in use for [audio](feature_audio.md), the backlight software PWM will not use a hardware timer, but instead will be triggered during the matrix scan. In this case the backlight doesn't support breathing and might show lighting artifacts (for instance flickering), because the PWM computation might not be called with enough timing precision.
+When both timers are in use for Audio, the backlight PWM will not use a hardware timer, but will instead be triggered during the matrix scan. In this case, breathing is not supported, and the backlight might flicker, because the PWM computation may not be called with enough timing precision.

 ## Configuration

--- a/docs/feature_combo.md
+++ b/docs/feature_combo.md
@@ -2,7 +2,7 @@

 The Combo feature is a chording type solution for adding custom actions.  It lets you hit multiple keys at once and produce a different effect.  For instance, hitting `A` and `S` within the tapping term would hit `ESC` instead, or have it perform even more complex tasks.

-To enable this feature, yu need to add `COMBO_ENABLE = yes` to your `rules.mk`.
+To enable this feature, you need to add `COMBO_ENABLE = yes` to your `rules.mk`.

 Additionally, in your `config.h`, you'll need to specify the number of combos that you'll be using, by adding `#define COMBO_COUNT 1` (replacing 1 with the number that you're using).
 <!-- At this time, this is necessary -->
--- a/docs/feature_split_keyboard.md
+++ b/docs/feature_split_keyboard.md
@@ -160,6 +160,11 @@ There are some settings that you may need to configure, based on how the hardwar

 This allows you to specify a different set of pins for the matrix on the right side.  This is useful if you have a board with differently-shaped halves that requires a different configuration (such as Keebio's Quefrency).

+```c
+#define DIRECT_PINS_RIGHT { { F1, F0, B0, C7 }, { F4, F5, F6, F7 } }
+```
+
+This allows you to specify a different set of direct pins for the right side.

 ```c
 #define RGBLIGHT_SPLIT
--- a/docs/getting_started_make_guide.md
+++ b/docs/getting_started_make_guide.md
@@ -83,7 +83,7 @@ This allows the keyboard to tell the host OS that up to 248 keys are held down a

 `BACKLIGHT_ENABLE`

-This enables your backlight on Timer1 and ports B5, B6, or B7 (for now). You can specify your port by putting this in your `config.h`:
+This enables the in-switch LED backlighting. You can specify the backlight pin by putting this in your `config.h`:

    #define BACKLIGHT_PIN B7

--- a/docs/hardware_avr.md
+++ b/docs/hardware_avr.md
@@ -125,7 +125,7 @@ To configure a keyboard where each switch is connected to a separate pin and gro

 ### Backlight Configuration

-By default QMK supports backlighting on pins `B5`, `B6`, and `B7`. If you are using one of those you can simply enable it here. For more details see the [Backlight Documentation](feature_backlight.md).
+QMK supports backlighting on most GPIO pins. A select few of these can be driven by the MCU in hardware. For more details see the [Backlight Documentation](feature_backlight.md).

 ```c
 #define BACKLIGHT_PIN B7
@@ -134,8 +134,6 @@ By default QMK supports backlighting on pins `B5`, `B6`, and `B7`. If you are us
 #define BREATHING_PERIOD 6
 ```

-?> You can use backlighting on any pin you like, but you will have to do more work to support that. See the [Backlight Documentation](feature_backlight.md) for more details.
-
 ### Other Configuration Options

 There are a lot of features that can be configured or tuned in `config.h`. You should see the [Config Options](config_options.md) page for more details.
--- a/docs/porting_your_keyboard_to_qmk_(arm_and_other_chibios_cpus).md
+++ b/docs/porting_your_keyboard_to_qmk_(arm_and_other_chibios_cpus).md
@@ -34,7 +34,7 @@ For the `DIODE_DIRECTION`, most hand-wiring guides will instruct you to wire the

 To configure a keyboard where each switch is connected to a separate pin and ground instead of sharing row and column pins, use `DIRECT_PINS`. The mapping defines the pins of each switch in rows and columns, from left to right. Must conform to the sizes within `MATRIX_ROWS` and `MATRIX_COLS`, use `NO_PIN` to fill in blank spaces. Overrides the behaviour of `DIODE_DIRECTION`, `MATRIX_ROW_PINS` and `MATRIX_COL_PINS`.

-`BACKLIGHT_PIN` is the pin that your PWM-controlled backlight (if one exists) is hooked-up to. Currently only B5, B6, and B7 are supported.
+`BACKLIGHT_PIN` is the pin that your PWM-controlled backlight (if one exists) is hooked-up to.

 `BACKLIGHT_BREATHING` is a fancier backlight feature that adds breathing/pulsing/fading effects to the backlight. It uses the same timer as the normal backlight. These breathing effects must be called by code in your keymap.

--- a/keyboards/ai03/lunar/keymaps/muzfuz/keymap.c
+++ b/keyboards/ai03/lunar/keymaps/muzfuz/keymap.c
@@ -0,0 +1,52 @@
+#include QMK_KEYBOARD_H
+
+// Helpful defines
+#define ESC_CTL     CTL_T(KC_ESCAPE)            // Tap for Esc, hold for Ctrl
+#define FL_KCF LT(1,KC_F)
+#define FL_KCJ LT(1,KC_J)
+#define CMD_ENT LGUI(LSFT(KC_ENT))
+
+enum custom_keycodes {
+  HASHRKT = SAFE_RANGE,
+  CLNEQLS,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	[0] = LAYOUT( /* Base */
+		KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_BSLS, LGUI(KC_C),
+		KC_TAB,           KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC, LGUI(KC_V),
+		ESC_CTL,          KC_A,    KC_S,    KC_D,    FL_KCF,  KC_G,    KC_H,    FL_KCJ,  KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  KC_PGUP,
+		KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_LSFT,          KC_UP,   KC_PGDN,
+		CMD_ENT, KC_LALT, KC_LGUI,          KC_SPC,           KC_SPC,           KC_SPC,                    MO(2),   KC_GRV,  KC_LEFT, KC_DOWN, KC_RGHT
+	),
+	[1] = LAYOUT( /* FL */
+		KC_ESC,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_DEL,  KC_VOLU,
+		_______,          HASHRKT, _______, KC_LCBR, KC_RCBR, _______, _______, KC_UNDS, KC_PLUS, KC_PIPE,  _______, _______, _______, _______, KC_VOLD,
+		_______,          CLNEQLS, _______, KC_LBRC, KC_RBRC, _______, _______, KC_MINS, KC_EQL,  KC_BSLS,  KC_TILD, KC_GRV,           _______, KC_HOME,
+		_______,          _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______,          _______, KC_END,
+		_______, _______, _______,          _______,          _______,          _______,                    _______, _______, _______, _______, _______
+	),
+	[2] = LAYOUT( /* FN */
+		RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_DEL,  _______,
+		KC_CAPS,          _______, KC_UP,   _______, _______, _______, KC_NLCK, KC_P7,   KC_P8,   KC_P9,   KC_MPRV, KC_MPLY, KC_MNXT, _______, _______,
+		_______,          KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_VOLD, KC_VOLU, KC_P4,   KC_P5,   KC_P6,   _______, _______,          _______, _______,
+		_______,          KC_RCTL, KC_RGUI, KC_RALT, _______, _______, KC_P0,   KC_P1,   KC_P2,   KC_P3,   _______, _______,          KC_PGUP, _______,
+		_______, _______, _______,          _______,          _______,          _______,                   _______, _______, KC_HOME, KC_PGDN, KC_END
+	)
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch(keycode) {
+    case HASHRKT:
+      if (record->event.pressed) {
+        SEND_STRING("=>");
+      }
+      break;
+    case CLNEQLS:
+      if (record->event.pressed) {
+        SEND_STRING(":=");
+      }
+      break;
+  }
+  return true;
+}
--- a/keyboards/ai03/lunar/keymaps/muzfuz/readme.md
+++ b/keyboards/ai03/lunar/keymaps/muzfuz/readme.md
@@ -0,0 +1,5 @@
+# muzfuz's keymap for Lunar
+
+```shell
+make ai03/lunar:muzfuz:dfu
+```
--- a/keyboards/akb/raine/config.h
+++ b/keyboards/akb/raine/config.h
@@ -23,8 +23,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define PRODUCT_ID 0x6060
 #define DEVICE_VER 0x0001
 #define MANUFACTURER AKB
-#define PRODUCT Raine M3
-#define DESCRIPTION Raine M3
+#define PRODUCT Raine
+#define DESCRIPTION Raine

 /* key matrix size */
 #define MATRIX_ROWS 5
--- a/keyboards/akb/raine/info.json
+++ b/keyboards/akb/raine/info.json
@@ -68,10 +68,12 @@
                { "label": "2", "x": 14.25, "y": 3 },
                { "label": "3", "x": 15.25, "y": 3 },
                { "label": "Ctrl", "x": 0, "y": 4, "w": 1.25 },
+                { "label": "Win", "x": 1.25, "y": 4},
                { "label": "Alt", "x": 2.25, "y": 4, "w": 1.25 },
                { "label": "SPLEFT", "x": 3.5, "y": 4, "w": 2.25 },
                { "label": "7U", "x": 5.75, "y": 4 },
                { "label": "SPRIGHT", "x": 6.75, "y": 4, "w": 1.75 },
+                { "label": "alt", "x": 8.5, "y": 4},
                { "label": "Menu", "x": 9.5, "y": 4, "w": 1.25 },
                { "x": 11, "y": 4.25 },
                { "x": 12, "y": 4.25 },
--- a/keyboards/akb/raine/keymaps/default/keymap.c
+++ b/keyboards/akb/raine/keymaps/default/keymap.c
@@ -17,16 +17,16 @@

 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  [0] = LAYOUT( /* Base */
-  KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_BSPC, KC_NLCK, KC_SLCK, KC_INS,
+  KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_BSPC, KC_PSLS, KC_PAST, KC_PPLS,
 	KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, KC_P7, KC_P8, KC_P9,
-	MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_HASH, KC_ENT, KC_P4, KC_P5, KC_P6,
-	KC_LSFT, KC_LALT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_SLSH, KC_LSFT, KC_UP, KC_P1, KC_P2, KC_P3,
-	KC_LCTL, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_LGUI, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_DEL),
+	CTL_T(KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6,
+	KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3,
+	KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_BSPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT),
  [1] = LAYOUT( /* Second */
-  KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______,
-	_______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LBRC, KC_RBRC, _______, _______, _______, _______,
-	_______, _______, _______, _______, _______, _______, _______, _______, KC_SCLN, KC_QUOT, _______, _______, _______, _______, _______,
-	_______, _______, _______, _______, _______, _______, _______, KC_COMM, KC_DOT, _______, _______, _______, _______, _______, _______,
-	_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET),
+  KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_DEL, KC_NLCK, KC_PSCR, KC_INS,
+	_______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LBRC, KC_RBRC, _______, KC_HOME, KC_UP, KC_PGUP,
+	_______, _______, _______, _______, _______, _______, _______, _______, KC_SCLN, KC_QUOT, _______, _______, KC_LEFT, KC_SLCK, KC_RGHT,
+	_______, _______, _______, _______, _______, _______, _______, KC_COMM, KC_DOT, _______, _______, _______, KC_END, KC_DOWN, KC_PGDN,
+	_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET),
 };

--- a/keyboards/akb/raine/raine.h
+++ b/keyboards/akb/raine/raine.h
@@ -23,11 +23,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111,       K113, K114, K115, \
 	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, \
 	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309,       K311, K312, K313, K314, K315, \
-	K400,       K402,       K404, K405,       K407,       K409,       K410,       K412, K413, K414, K415  \
+	K400, K401, K402,       K404, K405,       K407, K408, K409,       K410,       K412, K413, K414, K415  \
 ) { \
 	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014,  K015 }, \
 	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  KC_NO, K113,  K114,  K115 }, \
 	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  K214,  K215 }, \
 	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K311,  KC_NO, K312,  K313,  K314,  K315 }, \
-	{ K400,  KC_NO,  K402,  KC_NO, K404,  K405,  KC_NO, K407,  KC_NO,  K409,  K410,  KC_NO, K412,  K413,  K414,  K415 }  \
+	{ K400,  K401,  K402,  KC_NO, K404,  K405,  KC_NO, K407,  K408,  K409,  K410,  KC_NO, K412,  K413,  K414,  K415 }  \
 }
--- a/keyboards/alice/readme.md
+++ b/keyboards/alice/readme.md
@@ -1,60 +0,0 @@
-# TGR Alice
-
-![TGR Alice](https://i.imgur.com/cJohEqS.jpg)
-
-An ergonomic 60% keyboard.
-
-Keyboard Maintainer: [Felipe Coury](https://github.com/fcoury)  
-Hardware Supported: TGR Alice  
-Hardware Availability: Group buy finished  
-
-Make example for this keyboard (after setting up your build environment):
-
-    make alice:default
-
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
-
-
-ps2avrGB keyboard firmware
-==========================
-
-This keyboard uses the port of the QMK firmware for boards that are based on the
-ps2avrGB firmware.
-
-Note that this is a complete replacement for the firmware, so you won't be
-using Bootmapper Client to change any keyboard settings, since not all the
-USB report options are supported.
-
-## Installing
-
-First, install the requirements. These commands are for OSX, but all you
-need is the AVR toolchain and `bootloadHID` for flashing:
-
-```
-$ brew cask install crosspack-avr
-$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
-$ pip install pyusb
-```
-
-Then, with the keyboard plugged in, simply run this command from the
-`qmk_firmware` directory:
-
-```
-$ make alice
-$ bootloadHID -r alice_default.hex
-```
-
-## Setting the board to bootloader mode
-
-Hold the ESC key (the one before the 1! key, in case you remaped it).
-
-## Troubleshooting
-
-From my experience, it's really hard to brick these boards. But these
-tricks have been useful when it got stuck in a weird scenario.
-
-1. Try plugging the board in while holding the bootloader key. This will force
-   it to boot only the bootloader without loading the firmware. Once this is
-   done, just reflash the board with the original firmware.
-2. Sometimes USB hubs can act weird, so try connecting the board directly
-   to your computer or plugging/unplugging the USB hub.
--- a/keyboards/butterstick/keymaps/default/keymap.c
+++ b/keyboards/butterstick/keymaps/default/keymap.c
@@ -45,21 +45,21 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 uint32_t processQwerty(bool lookup) {
    // SECRET AGENT CHORDS
    P( LSU | LK | RS | RD,    	SEND_STRING(VERSION); SEND_STRING(__DATE__));
-	P( LR  | ST2| RR | RB, 		SEND(KC_BSPC));
+		P( LR  | ST2| RR | RB, 		SEND(KC_BSPC));
    P( LSD | RZ,   			 	SEND(KC_SPC));

    // Dual chords
    P( LP  | LH,    			CLICK_MOUSE(KC_MS_BTN2));
    P( ST1 | RF,    			CLICK_MOUSE(KC_MS_BTN1));
-    P( LSU | LFT,               SEND(KC_ESC));
-	P( LSD | LK,				SEND(KC_LSFT));
-	P( RZ  | RS,				SEND(KC_LSFT));
-	P( ST2 | RR,				SEND(KC_SPC));
+    P( LSU | LFT,         SEND(KC_ESC));
+		P( LSD | LK,					SEND(KC_LSFT));
+		P( RZ  | RS,					SEND(KC_LSFT));
+		P( ST2 | RR,					SEND(KC_SPC));
    P( RP  | RL,    			SEND(KC_LGUI));
    P( RT  | RD,    			SEND(KC_LCTL));
    P( RL  | RT,    			SEND(KC_LALT));
-	P( LSU | LSD | LFT | LK,	SEND(KC_LCTL));
-	P( RS  | RT  | RD  | RZ,	SEND(KC_ENT));
+		P( LSU | LSD | LFT | LK,	SEND(KC_LCTL));
+		P( RS  | RT  | RD  | RZ,	SEND(KC_ENT));

    // Function Layer
    P( FUNCT | RF,         SEND(KC_F1));
@@ -179,6 +179,5 @@ uint32_t processQwerty(bool lookup) {
    return 0;
 }

-
 // Don't fuck with this, thanks.
 size_t keymapsCount  = sizeof(keymaps)/sizeof(keymaps[0]);
--- a/keyboards/butterstick/sten.c
+++ b/keyboards/butterstick/sten.c
@@ -11,6 +11,18 @@ uint32_t pChord 		= 0;		// Previous Chord
 int		 pChordIndex 	= 0;		// Keys in previousachord
 uint32_t pChordState[32];			// Previous chord sate 
 uint32_t stickyBits = 0;			// Or'd with every incoming press
+#ifndef NO_DEBUG
+char debugMsg[32];
+#endif
+
+// StenoLayer
+uint32_t releasedChord	= 0;		// Keys released from current chord
+uint32_t tChord			= 0;		// Protects state of cChord
+
+#ifndef STENOLAYERS
+uint32_t stenoLayers[] = { PWR };
+size_t 	 stenoLayerCount = sizeof(stenoLayers)/sizeof(stenoLayers[0]);
+#endif

 // Mode state
 enum MODE { STENO = 0, QWERTY, COMMAND };
@@ -39,7 +51,6 @@ bool	inMouse 		= false;
 int8_t	mousePress;

 // All processing done at chordUp goes through here
-// Note, this is a gutted version of the Georgi sten.h
 bool send_steno_chord_user(steno_mode_t mode, uint8_t chord[6]) { 
 	// Check for mousekeys, this is release
 #ifdef MOUSEKEY_ENABLE
@@ -50,8 +61,21 @@ bool send_steno_chord_user(steno_mode_t mode, uint8_t chord[6]) {
 	}
 #endif

+	// Toggle Serial/QWERTY steno
+	if (cChord == (PWR | FN | ST1 | ST2)) {
+#ifndef NO_DEBUG
+		uprintf("Fallback Toggle\n");
+#endif
+		QWERSTENO = !QWERSTENO;
+		
+		goto out;
+	}
+
 	// handle command mode
-	if (cChord == (LSU | LSD | RD | RZ)) {
+	if (cChord == (PWR | FN | RD | RZ)) {
+#ifndef NO_DEBUG
+		uprintf("COMMAND Toggle\n");
+#endif
 		if (cMode != COMMAND) {   // Entering Command Mode
 			CMDLEN = 0;
 			pMode = cMode;
@@ -70,7 +94,7 @@ bool send_steno_chord_user(steno_mode_t mode, uint8_t chord[6]) {
 	}

 	// Handle Gaming Toggle,
-	if (cChord == (LSU | LSD | LFT | LK | RT | RS | RD | RZ) && keymapsCount > 1) {
+	if (cChord == (PWR | FN | ST4 | ST3) && keymapsCount > 1) {
 #ifndef NO_DEBUG
 		uprintf("Switching to QMK\n");
 #endif
@@ -78,11 +102,38 @@ bool send_steno_chord_user(steno_mode_t mode, uint8_t chord[6]) {
 		goto out;
 	}

+	// Lone FN press, toggle QWERTY
+#ifndef ONLYQWERTY
+	if (cChord == FN) {
+		(cMode == STENO) ? (cMode = QWERTY) : (cMode = STENO);
+		goto out;
+	}
+#endif
+
+	// Check for Plover momentary
+	if (cMode == QWERTY && (cChord & FN)) {
+		cChord ^= FN;
+		goto steno;
+	}
+
 	// Do QWERTY and Momentary QWERTY
-	if (cMode == QWERTY || (cMode == COMMAND)) {
+	if (cMode == QWERTY || (cMode == COMMAND) || (cChord & (FN | PWR))) {
 		processChord(false);
 		goto out;
-	} 
+	}
+
+	// Fallback NKRO Steno
+	if (cMode == STENO && QWERSTENO) {
+		processChord(true);
+		goto out;
+	}
+
+steno:
+	// Hey that's a steno chord!
+	inChord = false;
+	chordIndex = 0;
+	cChord = 0;
+	return true; 

 out:
 	cChord = 0;
--- a/keyboards/butterstick/sten.h
+++ b/keyboards/butterstick/sten.h
@@ -13,11 +13,14 @@

 extern size_t keymapsCount;			// Total keymaps
 extern uint32_t cChord;				// Current Chord
+extern uint32_t stenoLayers[];		// Chords that simulate QMK layers
+extern size_t stenoLayerCount;		// Number of simulated layers
+uint32_t refChord;					// Reference chord for PC macro

 // Function defs
 void 			processChord(bool useFakeSteno);
-uint32_t		processQwerty(bool lookup);
-uint32_t 		processFakeSteno(bool lookup);
+uint32_t	processQwerty(bool lookup);
+uint32_t 	processFakeSteno(bool lookup);
 void 			saveState(uint32_t cChord);
 void 			restoreState(void);

@@ -30,6 +33,11 @@ void 			CLICK_MOUSE(uint8_t);

 // Keymap helper
 #define P(chord, act) if (cChord == (chord)) { if (!lookup) {act;} return chord;}
+#define PC(chord, act) if (cChord == (chord)) { if (!lookup) {act;} return chord;} \
+	for(int i = 0; i < stenoLayerCount; i++) { \
+		refChord = stenoLayers[i] | chord; \
+		if (cChord == (refChord)) { if (!lookup) {act;} return refChord;}; \
+}

 // Shift to internal representation
 // i.e) S(teno)R(ight)F
--- a/keyboards/ckeys/readme.md
+++ b/keyboards/ckeys/readme.md
@@ -1,10 +1,11 @@
 # cKeys.org

-[cKeys](https://ckeys.org/) is a mechanical keyboard-based nonprofit organization located in Seattle, Washington.
+[cKeys](https://ckeys.org/) is an all volunteer run 501c3 nonprofit organization located in Seattle, Washington.

-In addition, to hosting the [Seattle Mechanical Keyboard Meetups](https://ckeys.org/events/), they have [soldering workshops](https://ckeys.org/workshops/) featuring hardware hosted in this repository.
+In addition to hosting the [Seattle Mechanical Keyboard Meetups](https://ckeys.org/events/), we teach [soldering workshops](https://ckeys.org/workshops/) featuring hardware hosted in this repository.

 * Supported Hardware
    * The Obelus   - 4x4 Macropad
    * naKey        - Through hole numpad
    * Handwire 101 - Handwired 4x4 (Proton C or Pro Micro)
+    * The Dora Board - 4x5 with rotary encoder and Proton C pinouts
--- a/keyboards/ckeys/thedora/config.h
+++ b/keyboards/ckeys/thedora/config.h
@@ -0,0 +1,188 @@
+/* Copyright 2019 Branden Byers
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER ckeys
+#define PRODUCT thedora
+#define DESCRIPTION A board for keyboard exploration.
+
+#define ENCODERS_PAD_A { B13 }
+#define ENCODERS_PAD_B { B15 }
+#define ENCODER_RESOLUTION 4
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 6
+
+#define MATRIX_ROW_PINS { A2, A1, A0, B8 }
+#define MATRIX_COL_PINS { B5, B4, B3, B2, B1, B0 }
+
+// #define UNUSED_PINS { B14 }
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+//#define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+//#define BACKLIGHT_LEVELS 3
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define AUDIO_CLICKY
+
+#define DAC_SAMPLE_MAX 65535U
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+// Audio Click
+
+// Music Mode Polyphony
+// NOTE: Must change polyphony_rate to a number higher than 0 in voices.c
+#define AUDIO_VOICES
+#define PITCH_STANDARD_A 880.0f
+
+// Mouse keys
+#define MOUSEKEY_DELAY 0
+#define MOUSEKEY_INTERVAL 20
+#define MOUSEKEY_MAX_SPEED 2
+#define MOUSEKEY_TIME_TO_MAX 5
+#define MOUSEKEY_WHEEL_DELAY 0
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
--- a/keyboards/ckeys/thedora/info.json
+++ b/keyboards/ckeys/thedora/info.json
@@ -0,0 +1,16 @@
+{
+  "keyboard_name": "The Dora Board.",
+  "url": "https://ckeys.org/slides/exboard",
+  "maintainer": "brandenbyers",
+  "width": 4,
+  "height": 4,
+  "layouts": {
+    "LAYOUT_ortho_4x5": {
+      "key_count": 20,
+      "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x": 4, "y":0},
+                 {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1},
+                 {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2},
+                 {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}]
+    }
+  }
+}
--- a/keyboards/ckeys/thedora/keymaps/default/config.h
+++ b/keyboards/ckeys/thedora/keymaps/default/config.h
@@ -0,0 +1,3 @@
+#pragma once
+
+// Add overrides here
--- a/keyboards/ckeys/thedora/keymaps/default/keymap.c
+++ b/keyboards/ckeys/thedora/keymaps/default/keymap.c
@@ -0,0 +1,155 @@
+#include QMK_KEYBOARD_H
+
+enum layers {
+  _BASE,                // base layer
+  _MUSIC,               // music mode
+  _MIDI,                // midi mode
+  _MOUSE,               // mouse keys
+  _ADMIN                // admin duties
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+//           ┌─────────┬─────────┬─────────┬─────────┬─────────┐
+//           │         │         │         │         │         │
+//           │    7    │    8    │    9    │    /    │  ADMIN  │
+//  ROTORY   │         │         │         │         │         │
+//  RIGHT:   ├─────────┼─────────┼─────────┼─────────┼─────────┤
+//  VOL UP   │         │         │         │         │         │
+//           │    4    │    5    │    6    │    *    │  MOUSE  │
+//  ROTORY   │         │         │         │         │         │
+//  LEFT:    ├─────────┼─────────┼─────────┼─────────┼─────────┤
+//  VOL DOWN │         │         │         │         │         │
+//           │    1    │    2    │    3    │    -    │  MIDI   │
+//           │         │         │         │         │         │
+// ┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
+// │  TOGGLE │         │         │         │         │         │
+// │  MUSIC  │    0    │    .    │    =    │    +    │  MUSIC  │
+// │         │         │         │         │         │         │
+// └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘
+
+  [_BASE] = LAYOUT(
+    KC_KP_7, KC_KP_8,   KC_KP_9,     KC_PSLS, MO(_ADMIN), MU_TOG,
+    KC_KP_4, KC_KP_5,   KC_KP_6,     KC_PAST, TG(_MOUSE),
+    KC_KP_1, KC_KP_2,   KC_KP_3,     KC_PMNS, TG(_MIDI),
+    KC_KP_0, KC_KP_DOT, KC_KP_EQUAL, KC_PPLS, MO(_MUSIC)
+  ),
+
+// MUSIC LAYER
+ //          ┌─────────┬─────────┬─────────┬─────────┬─────────┐
+ //          │         │         │         │         │         │
+ //          │         │         │         │         │         │
+ // ROTORY   │         │         │         │         │         │
+ // RIGHT:   ├─────────┼─────────┼─────────┼─────────┼─────────┤
+ // PAGE UP  │         │         │         │         │         │
+ //          │         │         │         │         │         │
+ // ROTORY   │         │         │         │         │         │
+ // LEFT:    ├─────────┼─────────┼─────────┼─────────┼─────────┤
+ // PAGE DOWN│         │         │         │         │         │
+ //          │         │         │         │  MODE   │         │
+ //          │         │         │         │         │         │
+ //┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
+ //│         │         │         │         │         │         │
+ //│         │ RECORD  │  STOP   │         │  PLAY   │         │
+ //│         │         │         │         │         │         │
+ //└─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘
+
+  [_MUSIC] = LAYOUT(
+    _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, MU_MOD,
+    KC_LCTL, KC_LALT, _______, KC_LGUI, _______
+  ),
+
+// MIDI LAYER
+//           ┌─────────┬─────────┬─────────┬─────────┬─────────┐
+//           │         │         │         │         │         │
+//           │   D♯    │    E    │    F    │   F♯    │    G    │
+//  ROTORY   │         │         │         │         │         │
+//  RIGHT:   ├─────────┼─────────┼─────────┼─────────┼─────────┤
+//  PAGE UP  │         │         │         │         │         │
+//           │   A♯    │    B    │    C    │   C♯    │    D    │
+//  ROTORY   │         │         │         │         │         │
+//  LEFT:    ├─────────┼─────────┼─────────┼─────────┼─────────┤
+//  PAGE DOWN│         │         │         │         │         │
+//           │    F    │   F♯    │    G    │   G♯    │    A    │
+//           │         │         │         │         │         │
+// ┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
+// │         │         │         │         │         │         │
+// │         │    C    │   C♯    │    D    │   D♯    │    E    │
+// │         │         │         │         │         │         │
+// └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘
+
+  [_MIDI] = LAYOUT(
+    MI_Ds_3, MI_E_3,  MI_F_3, MI_Fs_3, MI_G_3, _______,
+    MI_As_2, MI_B_2,  MI_C_3, MI_Cs_3, MI_D_3,
+    MI_F_2,  MI_Fs_2, MI_G_2, MI_Gs_2, TG(_MIDI),
+    MI_C_2,  MI_Cs_2, MI_D_2, MI_Ds_2, MI_E_2
+  ),
+
+// MOUSE LAYER
+//           ┌─────────┬─────────┬─────────┬─────────┬─────────┐
+//           │         │         │         │         │         │
+//           │  BTN 5  │         │  WHEEL  │         │         │
+//  ROTORY   │         │         │   UP    │         │         │
+//  RIGHT:   ├─────────┼─────────┼─────────┼─────────┼─────────┤
+//  PAGE DOWN│         │         │         │         │         │
+//           │         │  LEFT   │  MOUSE  │  RIGHT  │         │
+//  ROTORY   │         │  CLICK  │   UP    │  CLICK  │         │
+//  LEFT:    ├─────────┼─────────┼─────────┼─────────┼─────────┤
+//  PAGE UP  │         │         │         │         │         │
+//           │  BTN 4  │  MOUSE  │  MOUSE  │  MOUSE  │         │
+//           │         │  LEFT   │  DOWN   │  RIGHT  │         │
+// ┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
+// │         │         │         │         │         │         │
+// │         │  BTN 3  │  WHEEL  │  WHEEL  │  WHEEL  │         │
+// │         │         │  LEFT   │  DOWN   │  RIGHT  │         │
+// └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘
+
+  [_MOUSE] = LAYOUT(
+    KC_MS_BTN5, _______,       KC_MS_WH_UP,   _______,        _______,    _______,
+    _______,    KC_MS_BTN1,    KC_MS_UP,      KC_MS_BTN2,     TG(_MOUSE),
+    KC_MS_BTN4, KC_MS_LEFT,    KC_MS_DOWN,    KC_MS_RIGHT,    _______,
+    KC_MS_BTN3, KC_MS_WH_LEFT, KC_MS_WH_DOWN, KC_MS_WH_RIGHT, _______
+  ),
+
+// ADMIN LAYER
+//           ┌─────────┬─────────┬─────────┬─────────┬─────────┐
+//           │         │         │         │         │         │
+//           │  RESET  │         │         │         │         │
+//  ROTORY   │         │         │         │         │         │
+//  RIGHT:   ├─────────┼─────────┼─────────┼─────────┼─────────┤
+//  PAGE UP  │         │         │         │         │         │
+//           │    4    │    5    │    6    │    *    │         │
+//  ROTORY   │         │         │         │         │         │
+//  LEFT:    ├─────────┼─────────┼─────────┼─────────┼─────────┤
+//  PAGE DOWN│         │         │         │         │         │
+//           │    1    │    2    │    3    │         │         │
+//           │         │         │         │         │         │
+// ┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
+// │         │         │         │         │         │         │
+// │         │    0    │    .    │    =    │         │         │
+// │         │         │         │         │         │         │
+// └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘
+
+  [_ADMIN] = LAYOUT(
+    RESET,   _______, _______, _______, TG(_ADMIN), _______,
+    _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______
+  ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+};
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+  if (index == 0) { /* First encoder */
+    if (clockwise) {
+      tap_code(KC_PGDN);
+    } else {
+      tap_code(KC_PGUP);
+    }
+  }
+}
--- a/keyboards/ckeys/thedora/keymaps/default/readme.md
+++ b/keyboards/ckeys/thedora/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for the cKeys Handwire 101 4x4 keyboard.
--- a/keyboards/ckeys/thedora/readme.md
+++ b/keyboards/ckeys/thedora/readme.md
@@ -0,0 +1,57 @@
+# theDora Board
+
+![Thedora Board](https://ckeys.org/images/exboard-3.jpg)
+
+A 4x5 keyboard with rotary encoder, QWIIC connector, and header pinouts for easy access to all pins on the Proton C. This keyboard was built for QMK exploration big and small. What will you discover next?
+
+Keyboard Maintainer: [brandenbyers](https://github.com/brandenbyers)  
+Hardware Supported: theDora  
+Hardware Availability: [cKeys.org](https://ckeys.org)
+
+Make example for this keyboard (after setting up your build environment):
+
+`make ckeys/thedora:default`
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](Complete Newbs Guide).
+
+---
+
+## Slides
+
+Slides can be found at: https://ckeys.org/slides/exboard/
+
+## Case Design
+
+The acrylic laser cutter file is coming soon!
+
+## PCB Design
+
+All cKeys PCBs are open source. However, this one has not been posted yet because it needs to be cleaned up a bit! Coming soon!
+
+## Firmware
+
+If you want to reflash the pre-installed firmware, use the `.bin` file for Proton C. Flash with the QMK Toolbox or via the command line.
+
+Building for Proton C: `make ckeys/thedora:default`
+
+## Default Layout
+
+You can find the default layout in `thedora/keymaps/default/keymap.c`
+
+## Rotary Encoder
+
+This is the bit of code at the end of `keymap.c` that needs to changed if you want to change the behavior of the rotary encoder.
+
+```
+void encoder_update_user(uint8_t index, bool clockwise) {
+  if (index == 0) { /* First encoder */
+    if (clockwise) {
+      tap_code(KC_PGDN); // What the rotary encoder repeatedly does when turned right.
+    } else {
+      tap_code(KC_PGUP); // What it does when turned to the left.
+    }
+  }
+}
+```
+
+![The Dora Board](https://ckeys.org/images/exboard-1.jpg)
--- a/keyboards/ckeys/thedora/rules.mk
+++ b/keyboards/ckeys/thedora/rules.mk
@@ -0,0 +1,19 @@
+MCU = STM32F303
+
+# Build Options
+#   comment out to disable the options.
+#
+BACKLIGHT_ENABLE = no
+BOOTMAGIC_ENABLE = yes  # Virtual DIP switch configuration
+## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no  # Console for debug
+COMMAND_ENABLE = no    # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes     # USB Nkey Rollover
+AUDIO_ENABLE = yes
+MIDI_ENABLE = yes     # MIDI controls
+RGBLIGHT_ENABLE = no
+ENCODER_ENABLE = yes
+# SERIAL_LINK_ENABLE = yes
--- a/keyboards/ckeys/thedora/thedora.c
+++ b/keyboards/ckeys/thedora/thedora.c
@@ -0,0 +1,28 @@
+#include "thedora.h"
+
+void matrix_init_kb(void) {
+  // put your keyboard start-up code here
+  // runs once when the firmware starts up
+  // Turn status LED on
+  //DDRD |= (1<<6);
+  //PORTD |= (1<<6);
+
+  matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+  // put your looping keyboard code here
+  // runs every cycle (a lot)
+  matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+  // put your per-action keyboard code here
+  // runs for every action, just before processing by the firmware
+  return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+  led_set_user(usb_led);
+}
--- a/keyboards/ckeys/thedora/thedora.h
+++ b/keyboards/ckeys/thedora/thedora.h
@@ -0,0 +1,21 @@
+#pragma once
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The following is an example using the Planck MIT layout
+// The first section contains all of the arguements
+// The second converts the arguments into a two-dimensional array
+#define LAYOUT( \
+    k00, k01, k02, k03, k04, k05, \
+    k06, k07, k08, k09, k10, \
+    k11, k12, k13, k14, k15, \
+    k16, k17, k18, k19, k20 \
+) \
+{ \
+    { k00, k01, k02, k03, k04, k05, }, \
+    { k06, k07, k08, k09, k10 },       \
+    { k11, k12, k13, k14, k15 },       \
+    { k16, k17, k18, k19, k20 }        \
+}
+
--- a/keyboards/coseyfannitutti/discipline/config.h
+++ b/keyboards/coseyfannitutti/discipline/config.h
@@ -0,0 +1,247 @@
+/*Copyright 2019 coseyfannitutti
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6869
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    coseyfannitutti
+#define PRODUCT         DISCIPLINE
+#define DESCRIPTION     65% keyboard that can be assembled with only through hole components
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+
+#define MATRIX_ROW_PINS { B2, A1, B1, A0, B0 }
+#define MATRIX_COL_PINS { A2, B3, A3, B4, A4, D5, D6, C6, C5, C4, C3, C2, C1, C0, D7 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+#define NO_UART 1
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 0
+
--- a/keyboards/coseyfannitutti/discipline/discipline.c
+++ b/keyboards/coseyfannitutti/discipline/discipline.c
@@ -0,0 +1,24 @@
+/* Copyright 2019 coseyfannitutti
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "discipline.h"
+
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
--- a/keyboards/coseyfannitutti/discipline/discipline.h
+++ b/keyboards/coseyfannitutti/discipline/discipline.h
@@ -0,0 +1,78 @@
+/* Copyright 2019 coseyfannitutti
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define _x_ KC_NO
+
+#include "quantum.h"
+
+#define LAYOUT_65_ansi( \
+  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
+  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
+  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, K2E, \
+  K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
+  K40, K41, K42,                K46,           K49, K4A, K4B, K4C, K4D, K4E \
+) { \
+{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
+{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \
+{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, _x_, K2D, K2E }, \
+{ K30, _x_, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \
+{ K40, K41, K42, _x_, _x_, _x_, K46, _x_, _x_, K49, K4A, K4B, K4C, K4D, K4E} \
+}
+
+#define LAYOUT_65_ansi_2_right_mods( \
+  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
+  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
+  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, K2E, \
+  K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
+  K40, K41, K42,                K46,           K49, K4A,      K4C, K4D, K4E \
+) { \
+{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
+{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \
+{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, _x_, K2D, K2E }, \
+{ K30, _x_, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \
+{ K40, K41, K42, _x_, _x_, _x_, K46, _x_, _x_, K49, K4A, _x_, K4C, K4D, K4E} \
+}
+
+#define LAYOUT_wkl_ansi_2_right_mods( \
+  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
+  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
+  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, K2E, \
+  K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
+  K40,      K42,                K46,           K49, K4A,      K4C, K4D, K4E \
+) { \
+{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
+{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \
+{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, _x_, K2D, K2E }, \
+{ K30, _x_, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \
+{ K40, _x_, K42, _x_, _x_, _x_, K46, _x_, _x_, K49, K4A, _x_, K4C, K4D, K4E} \
+}
+
+#define LAYOUT_wkl_ansi_3_right_mods( \
+  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
+  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
+  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, K2E, \
+  K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
+  K40,      K42,                K46,           K49, K4A, K4B, K4C, K4D, K4E \
+) { \
+{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
+{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \
+{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, _x_, K2D, K2E }, \
+{ K30, _x_, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \
+{ K40, _x_, K42, _x_, _x_, _x_, K46, _x_, _x_, K49, K4A, K4B, K4C, K4D, K4E} \
+}
+
--- a/keyboards/coseyfannitutti/discipline/info.json
+++ b/keyboards/coseyfannitutti/discipline/info.json
@@ -0,0 +1,21 @@
+{
+    "keyboard_name": "DISCIPLINE", 
+    "url": "https://github.com/coseyfannitutti/discipline", 
+    "maintainer": "coseyfannitutti", 
+    "width": 16, 
+    "height": 5, 
+    "layouts": {
+        "LAYOUT_65_ansi": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"~", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"PgUp", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"PgDn", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4}, {"label":"Fn", "x":11, "y":4}, {"label":"Ctrl", "x":12, "y":4}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}]
+        },
+        "LAYOUT_65_ansi_2_right_mods": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"~", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"PgUp", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"PgDn", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.5}, {"label":"Fn", "x":11.5, "y":4, "w":1.5}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}]
+        },
+        "LAYOUT_wkl_ansi_2_right_mods": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"~", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"PgUp", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"PgDn", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Alt", "x":1.5, "y":4, "w":1.5}, {"x":3, "y":4, "w":7}, {"label":"Alt", "x":10, "y":4, "w":1.5}, {"label":"Fn", "x":11.5, "y":4, "w":1.5}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}]
+        },
+        "LAYOUT_wkl_ansi_3_right_mods": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"~", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"PgUp", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"PgDn", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Alt", "x":1.5, "y":4, "w":1.5}, {"x":3, "y":4, "w":7}, {"label":"Alt", "x":10, "y":4}, {"label":"Fn", "x":11, "y":4}, {"label":"Ctrl", "x":12, "y":4}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}]
+        }
+    }
+}
--- a/keyboards/coseyfannitutti/discipline/keymaps/67_ansi/keymap.c
+++ b/keyboards/coseyfannitutti/discipline/keymaps/67_ansi/keymap.c
@@ -0,0 +1,68 @@
+/* Copyright 2019 COSEYFANNITUTTI
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#define _BL 0
+#define _FL 1
+
+  /* Qwerty
+   * .---------------------------------------------------------------------------------------------.
+   * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |  Bkspc  | Ins |
+   * |---------------------------------------------------------------------------------------------+
+   * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |   \  | Del |
+   * |---------------------------------------------------------------------------------------------+
+   * | Caps    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |   Enter   | PgUp|
+   * |---------------------------------------------------------------------------------------------+
+   * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |  Shift  |  U  | Pgdn|
+   * |---------------------------------------------------------------------------------------------+
+   * | Ctrl |  Win  |  Alt  |              Space                | RAlt | FN |||||||  L |  D  |  R  |
+   * '---------------------------------------------------------------------------------------------'
+   */
+
+  /* FnLayer
+   * .---------------------------------------------------------------------------------------------.
+   * | ` ~ |  F1 |  F2 |  F3 |  F4 |  F5 |  F6 |  F7 |  F8 |  F9 | F10 | F11 | F12 |  DELETE |PNTSC|
+   * |---------------------------------------------------------------------------------------------+
+   * | Tab    |     |     |     |RESET|     |     |     |     |     |     |PAUSE|     |  \   |     |
+   * |---------------------------------------------------------------------------------------------+
+   * | Caps    |     |     |     |     |     |     |     |     |     |     | INS |    Enter  | HOME|
+   * |---------------------------------------------------------------------------------------------+
+   * | Shift     |     |     |     |     |     |     |     |     |     |     |  Shift  |VOLUP| END |
+   * |---------------------------------------------------------------------------------------------+
+   * | Ctrl |  Win  |  Alt  |                                   | RAlt| FN |||||||  L  |VOLDN|  R  |
+   * '---------------------------------------------------------------------------------------------'
+   */
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BL] = LAYOUT_65_ansi_2_right_mods(
+      KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_BSPC,  KC_GRV,
+      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC,  KC_RBRC, KC_BSLS,  KC_DEL,
+      KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT,  KC_ENT,            KC_PGUP,
+      KC_LSFT,          KC_Z,    KC_X,    KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH,  KC_RSFT, KC_UP,    KC_PGDN,
+      KC_LCTL, KC_LGUI, KC_LALT,                          KC_SPC,                 KC_RALT, MO(_FL),           KC_LEFT, KC_DOWN,  KC_RIGHT),
+
+  [_FL] = LAYOUT_65_ansi_2_right_mods(
+     /* esc      1        2        3        4       5       6       7       8       9         0        -         =     bkspc       `~  */
+      KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,   KC_F10,  KC_F11,   KC_F12,  KC_DEL,   KC_PSCR,
+     /*  tab      Q       W        E        R        T      Y        U      I        O        P        [         ]        \      delete*/ 
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,  KC_TRNS,KC_TRNS,KC_TRNS,KC_INS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_PAUS, KC_TRNS,  KC_TRNS,
+     /*  caps     A       S        D        F        G      H        J      K        L        ;        '        enter             pg up*/
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_INS,            KC_HOME,
+     /* shift             Z         X        C       V       B       N      M        ,        .        /        shift     up      pg dn*/
+      KC_LSFT,          KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS,  KC_RSFT, KC_VOLU,  KC_END,
+     /* ctrl     win      alt                              space                    alt      fn       ctrl      left     down     right*/
+      KC_LCTL, KC_LGUI, KC_LALT,                          KC_TRNS,                KC_RALT, KC_TRNS,            KC_TRNS, KC_VOLD,  KC_TRNS)
+};
--- a/keyboards/coseyfannitutti/discipline/keymaps/coseyfannitutti/keymap.c
+++ b/keyboards/coseyfannitutti/discipline/keymaps/coseyfannitutti/keymap.c
@@ -0,0 +1,69 @@
+/* Copyright 2019 COSEYFANNITUTTI
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#define _BL 0
+#define _FL 1
+
+  /* Qwerty
+   * .---------------------------------------------------------------------------------------------.
+   * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |  Bkspc  | Ins |
+   * |---------------------------------------------------------------------------------------------+
+   * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |   \  | Del |
+   * |---------------------------------------------------------------------------------------------+
+   * | Caps    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |   Enter   | PgUp|
+   * |---------------------------------------------------------------------------------------------+
+   * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |  Shift  |  U  | Pgdn|
+   * |---------------------------------------------------------------------------------------------+
+   * | Ctrl |  Win  |  Alt  |              Space                | RAlt | FN |||||||  L |  D  |  R  |
+   * '---------------------------------------------------------------------------------------------'
+   */
+
+  /* FnLayer
+   * .---------------------------------------------------------------------------------------------.
+   * | ` ~ |  F1 |  F2 |  F3 |  F4 |  F5 |  F6 |  F7 |  F8 |  F9 | F10 | F11 | F12 |  DELETE |PNTSC|
+   * |---------------------------------------------------------------------------------------------+
+   * | Tab    |     |     |     |RESET|     |     |     |     |     |     |PAUSE|     |  \   |     |
+   * |---------------------------------------------------------------------------------------------+
+   * | Caps    |     |     |     |     |     |     |     |     |     |     | INS |    Enter  | HOME|
+   * |---------------------------------------------------------------------------------------------+
+   * | Shift     |     |     |     |     |     |     |     |     |     |     |  Shift  |VOLUP| END |
+   * |---------------------------------------------------------------------------------------------+
+   * | Ctrl |  Win  |  Alt  |                                   | RAlt| FN |||||||  L  |VOLDN|  R  |
+   * '---------------------------------------------------------------------------------------------'
+   */
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BL] = LAYOUT_65_ansi_2_right_mods(
+      KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_BSPC,  KC_DEL,
+      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC,  KC_RBRC, KC_BSLS,  KC_PGUP,
+      KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT,  KC_ENT,            KC_PGDN,
+      KC_LSFT,          KC_Z,    KC_X,    KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH,  KC_RSFT, KC_UP,    MO(_FL),
+      KC_LCTL, KC_LGUI, KC_LALT,                          KC_SPC,                 KC_RALT, MO(_FL),           KC_LEFT, KC_DOWN,  KC_RIGHT),
+
+  [_FL] = LAYOUT_65_ansi_2_right_mods(
+     /* esc      1        2        3        4       5       6       7       8       9         0        -         =     bkspc       `~  */
+      KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,   KC_F10,  KC_F11,   KC_F12,  KC_DEL,   KC_PSCR,
+     /*  tab      Q       W        E        R        T      Y        U      I        O        P        [         ]        \      delete*/ 
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,  KC_TRNS,KC_TRNS,KC_TRNS,KC_INS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_PAUS, KC_TRNS,  KC_TRNS,
+     /*  caps     A       S        D        F        G      H        J      K        L        ;        '        enter             pg up*/
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_INS,            KC_HOME,
+     /* shift             Z         X        C       V       B       N      M        ,        .        /        shift     up      pg dn*/
+      KC_LSFT,          KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS,  KC_RSFT, KC_VOLU,  KC_END,
+     /* ctrl     win      alt                              space                    alt      fn                  left     down     right*/
+      KC_LCTL, KC_LGUI, KC_LALT,                          KC_TRNS,                KC_RALT, KC_TRNS,             KC_TRNS, KC_VOLD,  KC_TRNS)
+};
+
--- a/keyboards/coseyfannitutti/discipline/keymaps/default/keymap.c
+++ b/keyboards/coseyfannitutti/discipline/keymaps/default/keymap.c
@@ -0,0 +1,68 @@
+/* Copyright 2019 COSEYFANNITUTTI
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#define _BL 0
+#define _FL 1
+
+  /* Qwerty
+   * .---------------------------------------------------------------------------------------------.
+   * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |  Bkspc  | Ins |
+   * |---------------------------------------------------------------------------------------------+
+   * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |   \  | Del |
+   * |---------------------------------------------------------------------------------------------+
+   * | Caps    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |   Enter   | PgUp|
+   * |---------------------------------------------------------------------------------------------+
+   * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |  Shift  |  U  | Pgdn|
+   * |---------------------------------------------------------------------------------------------+
+   * | Ctrl |  Win  |  Alt  |              Space                | RAlt | FN |RCtrl|  L |  D  |  R  |
+   * '---------------------------------------------------------------------------------------------'
+   */
+
+  /* FnLayer
+   * .---------------------------------------------------------------------------------------------.
+   * | ` ~ |  F1 |  F2 |  F3 |  F4 |  F5 |  F6 |  F7 |  F8 |  F9 | F10 | F11 | F12 |  DELETE |PNTSC|
+   * |---------------------------------------------------------------------------------------------+
+   * | Tab    |     |     |     |RESET|     |     |     |     |     |     |PAUSE|     |  \   |     |
+   * |---------------------------------------------------------------------------------------------+
+   * | Caps    |     |     |     |     |     |     |     |     |     |     | INS |    Enter  | HOME|
+   * |---------------------------------------------------------------------------------------------+
+   * | Shift     |     |     |     |     |     |     |     |     |     |     |  Shift  |VOLUP| END |
+   * |---------------------------------------------------------------------------------------------+
+   * | Ctrl |  Win  |  Alt  |                                   | RAlt| FN |RCtrl|  L  |VOLDN|  R  |
+   * '---------------------------------------------------------------------------------------------'
+   */
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BL] = LAYOUT_65_ansi(
+      KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_BSPC,  KC_GRV,
+      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC,  KC_RBRC, KC_BSLS,  KC_DEL,
+      KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT,  KC_ENT,            KC_PGUP,
+      KC_LSFT,          KC_Z,    KC_X,    KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH,  KC_RSFT, KC_UP,    KC_PGDN,
+      KC_LCTL, KC_LGUI, KC_LALT,                          KC_SPC,                 KC_RALT, MO(_FL), KC_RCTL,  KC_LEFT, KC_DOWN,  KC_RIGHT),
+
+  [_FL] = LAYOUT_65_ansi(
+     /* esc      1        2        3        4       5       6       7       8       9         0        -         =     bkspc       `~  */
+      KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,   KC_F10,  KC_F11,   KC_F12,  KC_DEL,   KC_PSCR,
+     /*  tab      Q       W        E        R        T      Y        U      I        O        P        [         ]        \      delete*/ 
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,  KC_TRNS,KC_TRNS,KC_TRNS,KC_INS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_PAUS, KC_TRNS,  KC_TRNS,
+     /*  caps     A       S        D        F        G      H        J      K        L        ;        '        enter             pg up*/
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_INS,            KC_HOME,
+     /* shift             Z         X        C       V       B       N      M        ,        .        /        shift     up      pg dn*/
+      KC_LSFT,          KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS,  KC_RSFT, KC_VOLU,  KC_END,
+     /* ctrl     win      alt                              space                    alt      fn       ctrl      left     down     right*/
+      KC_LCTL, KC_LGUI, KC_LALT,                          KC_TRNS,                KC_RALT, KC_TRNS, KC_RCTL,  KC_TRNS, KC_VOLD,  KC_TRNS)
+};
--- a/keyboards/coseyfannitutti/discipline/keymaps/wkl_ansi_2_right_mods/keymap.c
+++ b/keyboards/coseyfannitutti/discipline/keymaps/wkl_ansi_2_right_mods/keymap.c
@@ -0,0 +1,68 @@
+/* Copyright 2019 COSEYFANNITUTTI
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#define _BL 0
+#define _FL 1
+
+  /* Qwerty
+   * .---------------------------------------------------------------------------------------------.
+   * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |  Bkspc  | Ins |
+   * |---------------------------------------------------------------------------------------------+
+   * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |   \  | Del |
+   * |---------------------------------------------------------------------------------------------+
+   * | Caps    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |   Enter   | PgUp|
+   * |---------------------------------------------------------------------------------------------+
+   * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |  Shift  |  U  | Pgdn|
+   * |---------------------------------------------------------------------------------------------+
+   * | Ctrl    |   Alt  |              Space                |  RAlt  |   FN    |     L |  D  |  R  |
+   * '---------------------------------------------------------------------------------------------'
+   */
+
+  /* FnLayer
+   * .---------------------------------------------------------------------------------------------.
+   * | ` ~ |  F1 |  F2 |  F3 |  F4 |  F5 |  F6 |  F7 |  F8 |  F9 | F10 | F11 | F12 |  DELETE |PNTSC|
+   * |---------------------------------------------------------------------------------------------+
+   * | Tab    |     |     |     |RESET|     |     |     |     |     |     |PAUSE|     |  \   |     |
+   * |---------------------------------------------------------------------------------------------+
+   * | Caps    |     |     |     |     |     |     |     |     |     |     | INS |    Enter  | HOME|
+   * |---------------------------------------------------------------------------------------------+
+   * | Shift     |     |     |     |     |     |     |     |     |     |     |  Shift  |VOLUP| END |
+   * |---------------------------------------------------------------------------------------------+
+   * |  Ctrl    |   Alt  |                                    |  RAlt   |   FN   |  L  |VOLDN|  R  |
+   * '---------------------------------------------------------------------------------------------'
+   */
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BL] = LAYOUT_wkl_ansi_2_right_mods(
+      KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_BSPC,  KC_GRV,
+      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC,  KC_RBRC, KC_BSLS,  KC_DEL,
+      KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT,  KC_ENT,            KC_PGUP,
+      KC_LSFT,          KC_Z,    KC_X,    KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH,  KC_RSFT, KC_UP,    KC_PGDN,
+      KC_LCTL,          KC_LALT,                          KC_SPC,                 KC_RALT, MO(_FL),           KC_LEFT, KC_DOWN,  KC_RIGHT),
+
+  [_FL] = LAYOUT_wkl_ansi_2_right_mods(
+     /* esc      1        2        3        4       5       6       7       8       9         0        -         =     bkspc       `~  */
+      KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,   KC_F10,  KC_F11,   KC_F12,  KC_DEL,   KC_PSCR,
+     /*  tab      Q       W        E        R        T      Y        U      I        O        P        [         ]        \      delete*/ 
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,  KC_TRNS,KC_TRNS,KC_TRNS,KC_INS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_PAUS, KC_TRNS,  KC_TRNS,
+     /*  caps     A       S        D        F        G      H        J      K        L        ;        '        enter             pg up*/
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_INS,            KC_HOME,
+     /* shift             Z         X        C       V       B       N      M        ,        .        /        shift     up      pg dn*/
+      KC_LSFT,          KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS,  KC_RSFT, KC_VOLU,  KC_END,
+     /* ctrl              alt                              space                    alt      fn                 left     down     right*/
+      KC_LCTL,          KC_LALT,                          KC_TRNS,                KC_RALT, KC_TRNS,            KC_TRNS, KC_VOLD,  KC_TRNS)
+};
--- a/keyboards/coseyfannitutti/discipline/keymaps/wkl_ansi_3_right_mods/keymap.c
+++ b/keyboards/coseyfannitutti/discipline/keymaps/wkl_ansi_3_right_mods/keymap.c
@@ -0,0 +1,68 @@
+/* Copyright 2019 COSEYFANNITUTTI
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#define _BL 0
+#define _FL 1
+
+  /* Qwerty
+   * .---------------------------------------------------------------------------------------------.
+   * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |  Bkspc  | Ins |
+   * |---------------------------------------------------------------------------------------------+
+   * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |   \  | Del |
+   * |---------------------------------------------------------------------------------------------+
+   * | Caps    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |   Enter   | PgUp|
+   * |---------------------------------------------------------------------------------------------+
+   * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |  Shift  |  U  | Pgdn|
+   * |---------------------------------------------------------------------------------------------+
+   * |   Ctrl   |    Alt    |              Space                | RAlt | FN |RCtrl|  L |  D  |  R  |
+   * '---------------------------------------------------------------------------------------------'
+   */
+
+  /* FnLayer
+   * .---------------------------------------------------------------------------------------------.
+   * | ` ~ |  F1 |  F2 |  F3 |  F4 |  F5 |  F6 |  F7 |  F8 |  F9 | F10 | F11 | F12 |  DELETE |PNTSC|
+   * |---------------------------------------------------------------------------------------------+
+   * | Tab    |STATC|BRTHE|RNBOW|RESET|     |     |     |     |     |     |PAUSE|     |  \   |     |
+   * |---------------------------------------------------------------------------------------------+
+   * | Caps    |RGBH+|RGBS+|RGBB+|     |     |     |     |     |     |     | INS |    Enter  | HOME|
+   * |---------------------------------------------------------------------------------------------+
+   * | Shift     |RGBH-|RGBS-|RGBB-|     |     |     |     |RGBM-|RGBM+|RGBTG|  Shift  |VOLUP| END |
+   * |---------------------------------------------------------------------------------------------+
+   * |   Ctrl   |     Alt   |                                   | RAlt| FN |RCtrl|  L  |VOLDN|  R  |
+   * '---------------------------------------------------------------------------------------------'
+   */
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BL] = LAYOUT_wkl_ansi_3_right_mods(
+      KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_BSPC,  KC_GRV,
+      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC,  KC_RBRC, KC_BSLS,  KC_DEL,
+      KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT,  KC_ENT,            KC_PGUP,
+      KC_LSFT,          KC_Z,    KC_X,    KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH,  KC_RSFT, KC_UP,    KC_PGDN,
+      KC_LCTL,          KC_LALT,                          KC_SPC,                 KC_RALT, MO(_FL), KC_RCTL,  KC_LEFT, KC_DOWN,  KC_RIGHT),
+
+  [_FL] = LAYOUT_wkl_ansi_3_right_mods(
+     /* esc      1        2        3        4       5       6       7       8       9         0        -         =     bkspc       `~  */
+      KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,   KC_F10,  KC_F11,   KC_F12,  KC_DEL,   KC_PSCR,
+     /*  tab      Q       W        E        R        T      Y        U      I        O        P        [         ]        \      delete*/ 
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,  KC_TRNS,KC_TRNS,KC_TRNS,KC_INS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_PAUS, KC_TRNS,  KC_TRNS,
+     /*  caps     A       S        D        F        G      H        J      K        L        ;        '        enter             pg up*/
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_INS,            KC_HOME,
+     /* shift             Z         X        C       V       B       N      M        ,        .        /        shift     up      pg dn*/
+      KC_LSFT,          KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS,  KC_RSFT, KC_VOLU,  KC_END,
+     /* ctrl              alt                              space                    alt      fn       ctrl      left     down     right*/
+      KC_LCTL,          KC_LALT,                          KC_TRNS,                KC_RALT, KC_TRNS, KC_RCTL,  KC_TRNS, KC_VOLD,  KC_TRNS)
+};
--- a/keyboards/coseyfannitutti/discipline/readme.md
+++ b/keyboards/coseyfannitutti/discipline/readme.md
@@ -0,0 +1,15 @@
+# DISCIPLINE
+
+![discipline](https://i.imgur.com/OqQ1Ko8.jpg)
+
+A 65% keyboard that can be assembled with only through hole components, including usb type-c
+
+Keyboard Maintainer: [coseyfannitutti](https://github.com/coseyfannitutti)  
+Hardware Supported: DISCIPLINE, atmega32a  
+Hardware Availability: [cftkb.com](http://www.cftkb.com), [GitHub](https://github.com/coseyfannitutti/discipline)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make coseyfannitutti/discipline:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- a/keyboards/coseyfannitutti/discipline/rules.mk
+++ b/keyboards/coseyfannitutti/discipline/rules.mk
@@ -0,0 +1,91 @@
+# MCU name
+MCU = atmega32a
+PROTOCOL = VUSB
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+#
+# This uses usbaspbootloader
+BOOTLOADER = USBasp
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+
+# Flash program via avrdude, but default command is not suitable.
+# You can use plaid:default:program
+PROGRAM_CMD = avrdude -c usbasp -p m32 -U flash:w:$(BUILD_DIR)/$(TARGET).hex
+
+# disable debug code
+OPT_DEFS = -DDEBUG_LEVEL=0
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+
+# unsupported features for now
+NO_UART = yes
+NO_SUSPEND_POWER_DOWN = yes
+
+LAYOUTS = 65_ansi
--- a/keyboards/coseyfannitutti/discipline/usbconfig.h
+++ b/keyboards/coseyfannitutti/discipline/usbconfig.h
@@ -0,0 +1,397 @@
+/* Name: usbconfig.h
+ * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
+ * Author: Christian Starkjohann
+ * Creation Date: 2005-04-01
+ * Tabsize: 4
+ * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
+ * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
+ * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
+ */
+
+#ifndef __usbconfig_h_included__
+#define __usbconfig_h_included__
+
+#include "config.h"
+
+/*
+General Description:
+This file is an example configuration (with inline documentation) for the USB
+driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
+also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
+wire the lines to any other port, as long as D+ is also wired to INT0 (or any
+other hardware interrupt, as long as it is the highest level interrupt, see
+section at the end of this file).
+*/
+
+/* ---------------------------- Hardware Config ---------------------------- */
+
+#define USB_CFG_IOPORTNAME      D
+/* This is the port where the USB bus is connected. When you configure it to
+ * "B", the registers PORTB, PINB and DDRB will be used.
+ */
+#define USB_CFG_DMINUS_BIT      3
+/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
+ * This may be any bit in the port.
+ */
+#define USB_CFG_DPLUS_BIT       2
+/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
+ * This may be any bit in the port. Please note that D+ must also be connected
+ * to interrupt pin INT0! [You can also use other interrupts, see section
+ * "Optional MCU Description" below, or you can connect D- to the interrupt, as
+ * it is required if you use the USB_COUNT_SOF feature. If you use D- for the
+ * interrupt, the USB interrupt will also be triggered at Start-Of-Frame
+ * markers every millisecond.]
+ */
+#define USB_CFG_CLOCK_KHZ       (F_CPU/1000)
+/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
+ * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
+ * require no crystal, they tolerate +/- 1% deviation from the nominal
+ * frequency. All other rates require a precision of 2000 ppm and thus a
+ * crystal!
+ * Since F_CPU should be defined to your actual clock rate anyway, you should
+ * not need to modify this setting.
+ */
+#define USB_CFG_CHECK_CRC       0
+/* Define this to 1 if you want that the driver checks integrity of incoming
+ * data packets (CRC checks). CRC checks cost quite a bit of code size and are
+ * currently only available for 18 MHz crystal clock. You must choose
+ * USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
+ */
+
+/* ----------------------- Optional Hardware Config ------------------------ */
+
+/* #define USB_CFG_PULLUP_IOPORTNAME   D */
+/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
+ * V+, you can connect and disconnect the device from firmware by calling
+ * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
+ * This constant defines the port on which the pullup resistor is connected.
+ */
+/* #define USB_CFG_PULLUP_BIT          4 */
+/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
+ * above) where the 1.5k pullup resistor is connected. See description
+ * above for details.
+ */
+
+/* --------------------------- Functional Range ---------------------------- */
+
+#define USB_CFG_HAVE_INTRIN_ENDPOINT    1
+/* Define this to 1 if you want to compile a version with two endpoints: The
+ * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
+ * number).
+ */
+#define USB_CFG_HAVE_INTRIN_ENDPOINT3   1
+/* Define this to 1 if you want to compile a version with three endpoints: The
+ * default control endpoint 0, an interrupt-in endpoint 3 (or the number
+ * configured below) and a catch-all default interrupt-in endpoint as above.
+ * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
+ */
+#define USB_CFG_EP3_NUMBER              3
+/* If the so-called endpoint 3 is used, it can now be configured to any other
+ * endpoint number (except 0) with this macro. Default if undefined is 3.
+ */
+/* #define USB_INITIAL_DATATOKEN           USBPID_DATA1 */
+/* The above macro defines the startup condition for data toggling on the
+ * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
+ * Since the token is toggled BEFORE sending any data, the first packet is
+ * sent with the oposite value of this configuration!
+ */
+#define USB_CFG_IMPLEMENT_HALT          0
+/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
+ * for endpoint 1 (interrupt endpoint). Although you may not need this feature,
+ * it is required by the standard. We have made it a config option because it
+ * bloats the code considerably.
+ */
+#define USB_CFG_SUPPRESS_INTR_CODE      0
+/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
+ * want to send any data over them. If this macro is defined to 1, functions
+ * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
+ * you need the interrupt-in endpoints in order to comply to an interface
+ * (e.g. HID), but never want to send any data. This option saves a couple
+ * of bytes in flash memory and the transmit buffers in RAM.
+ */
+#define USB_CFG_INTR_POLL_INTERVAL      1
+/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
+ * interval. The value is in milliseconds and must not be less than 10 ms for
+ * low speed devices.
+ */
+#define USB_CFG_IS_SELF_POWERED         0
+/* Define this to 1 if the device has its own power supply. Set it to 0 if the
+ * device is powered from the USB bus.
+ */
+// max power draw with maxed white underglow measured at 120 mA (peaks)
+#define USB_CFG_MAX_BUS_POWER           100
+/* Set this variable to the maximum USB bus power consumption of your device.
+ * The value is in milliamperes. [It will be divided by two since USB
+ * communicates power requirements in units of 2 mA.]
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITE      1
+/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
+ * transfers. Set it to 0 if you don't need it and want to save a couple of
+ * bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_READ       0
+/* Set this to 1 if you need to send control replies which are generated
+ * "on the fly" when usbFunctionRead() is called. If you only want to send
+ * data from a static buffer, set it to 0 and return the data from
+ * usbFunctionSetup(). This saves a couple of bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITEOUT   0
+/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
+ * You must implement the function usbFunctionWriteOut() which receives all
+ * interrupt/bulk data sent to any endpoint other than 0. The endpoint number
+ * can be found in 'usbRxToken'.
+ */
+#define USB_CFG_HAVE_FLOWCONTROL        0
+/* Define this to 1 if you want flowcontrol over USB data. See the definition
+ * of the macros usbDisableAllRequests() and usbEnableAllRequests() in
+ * usbdrv.h.
+ */
+#define USB_CFG_DRIVER_FLASH_PAGE       0
+/* If the device has more than 64 kBytes of flash, define this to the 64 k page
+ * where the driver's constants (descriptors) are located. Or in other words:
+ * Define this to 1 for boot loaders on the ATMega128.
+ */
+#define USB_CFG_LONG_TRANSFERS          0
+/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
+ * in a single control-in or control-out transfer. Note that the capability
+ * for long transfers increases the driver size.
+ */
+/* #define USB_RX_USER_HOOK(data, len)     if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
+/* This macro is a hook if you want to do unconventional things. If it is
+ * defined, it's inserted at the beginning of received message processing.
+ * If you eat the received message and don't want default processing to
+ * proceed, do a return after doing your things. One possible application
+ * (besides debugging) is to flash a status LED on each packet.
+ */
+/* #define USB_RESET_HOOK(resetStarts)     if(!resetStarts){hadUsbReset();} */
+/* This macro is a hook if you need to know when an USB RESET occurs. It has
+ * one parameter which distinguishes between the start of RESET state and its
+ * end.
+ */
+/* #define USB_SET_ADDRESS_HOOK()              hadAddressAssigned(); */
+/* This macro (if defined) is executed when a USB SET_ADDRESS request was
+ * received.
+ */
+#define USB_COUNT_SOF                   0
+/* define this macro to 1 if you need the global variable "usbSofCount" which
+ * counts SOF packets. This feature requires that the hardware interrupt is
+ * connected to D- instead of D+.
+ */
+/* #ifdef __ASSEMBLER__
+ * macro myAssemblerMacro
+ *     in      YL, TCNT0
+ *     sts     timer0Snapshot, YL
+ *     endm
+ * #endif
+ * #define USB_SOF_HOOK                    myAssemblerMacro
+ * This macro (if defined) is executed in the assembler module when a
+ * Start Of Frame condition is detected. It is recommended to define it to
+ * the name of an assembler macro which is defined here as well so that more
+ * than one assembler instruction can be used. The macro may use the register
+ * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
+ * immediately after an SOF pulse may be lost and must be retried by the host.
+ * What can you do with this hook? Since the SOF signal occurs exactly every
+ * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
+ * designs running on the internal RC oscillator.
+ * Please note that Start Of Frame detection works only if D- is wired to the
+ * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
+ */
+#define USB_CFG_CHECK_DATA_TOGGLING     0
+/* define this macro to 1 if you want to filter out duplicate data packets
+ * sent by the host. Duplicates occur only as a consequence of communication
+ * errors, when the host does not receive an ACK. Please note that you need to
+ * implement the filtering yourself in usbFunctionWriteOut() and
+ * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
+ * for each control- and out-endpoint to check for duplicate packets.
+ */
+#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH   0
+/* define this macro to 1 if you want the function usbMeasureFrameLength()
+ * compiled in. This function can be used to calibrate the AVR's RC oscillator.
+ */
+#define USB_USE_FAST_CRC                0
+/* The assembler module has two implementations for the CRC algorithm. One is
+ * faster, the other is smaller. This CRC routine is only used for transmitted
+ * messages where timing is not critical. The faster routine needs 31 cycles
+ * per byte while the smaller one needs 61 to 69 cycles. The faster routine
+ * may be worth the 32 bytes bigger code size if you transmit lots of data and
+ * run the AVR close to its limit.
+ */
+
+/* -------------------------- Device Description --------------------------- */
+
+#define USB_CFG_VENDOR_ID       (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
+/* USB vendor ID for the device, low byte first. If you have registered your
+ * own Vendor ID, define it here. Otherwise you may use one of obdev's free
+ * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_ID       (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
+/* This is the ID of the product, low byte first. It is interpreted in the
+ * scope of the vendor ID. If you have registered your own VID with usb.org
+ * or if you have licensed a PID from somebody else, define it here. Otherwise
+ * you may use one of obdev's free shared VID/PID pairs. See the file
+ * USB-IDs-for-free.txt for details!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_VERSION  0x01, 0x00
+/* Version number of the device: Minor number first, then major number.
+ */
+#define USB_CFG_VENDOR_NAME     'c','o','s','e','y','f','a','n','n','i','t','u','t','t','i'
+#define USB_CFG_VENDOR_NAME_LEN 15
+/* These two values define the vendor name returned by the USB device. The name
+ * must be given as a list of characters under single quotes. The characters
+ * are interpreted as Unicode (UTF-16) entities.
+ * If you don't want a vendor name string, undefine these macros.
+ * ALWAYS define a vendor name containing your Internet domain name if you use
+ * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
+ * details.
+ */
+#define USB_CFG_DEVICE_NAME     'D','I','S','C','I','P','L','I','N','E'
+#define USB_CFG_DEVICE_NAME_LEN 10
+/* Same as above for the device name. If you don't want a device name, undefine
+ * the macros. See the file USB-IDs-for-free.txt before you assign a name if
+ * you use a shared VID/PID.
+ */
+#define USB_CFG_SERIAL_NUMBER   '0'
+#define USB_CFG_SERIAL_NUMBER_LEN   1
+/* Same as above for the serial number. If you don't want a serial number,
+ * undefine the macros.
+ * It may be useful to provide the serial number through other means than at
+ * compile time. See the section about descriptor properties below for how
+ * to fine tune control over USB descriptors such as the string descriptor
+ * for the serial number.
+ */
+#define USB_CFG_DEVICE_CLASS        0
+#define USB_CFG_DEVICE_SUBCLASS     0
+/* See USB specification if you want to conform to an existing device class.
+ * Class 0xff is "vendor specific".
+ */
+#define USB_CFG_INTERFACE_CLASS     3   /* HID */
+#define USB_CFG_INTERFACE_SUBCLASS  1   /* Boot */
+#define USB_CFG_INTERFACE_PROTOCOL  1   /* Keyboard */
+/* See USB specification if you want to conform to an existing device class or
+ * protocol. The following classes must be set at interface level:
+ * HID class is 3, no subclass and protocol required (but may be useful!)
+ * CDC class is 2, use subclass 2 and protocol 1 for ACM
+ */
+#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH    0
+/* Define this to the length of the HID report descriptor, if you implement
+ * an HID device. Otherwise don't define it or define it to 0.
+ * If you use this define, you must add a PROGMEM character array named
+ * "usbHidReportDescriptor" to your code which contains the report descriptor.
+ * Don't forget to keep the array and this define in sync!
+ */
+
+/* #define USB_PUBLIC static */
+/* Use the define above if you #include usbdrv.c instead of linking against it.
+ * This technique saves a couple of bytes in flash memory.
+ */
+
+/* ------------------- Fine Control over USB Descriptors ------------------- */
+/* If you don't want to use the driver's default USB descriptors, you can
+ * provide our own. These can be provided as (1) fixed length static data in
+ * flash memory, (2) fixed length static data in RAM or (3) dynamically at
+ * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
+ * information about this function.
+ * Descriptor handling is configured through the descriptor's properties. If
+ * no properties are defined or if they are 0, the default descriptor is used.
+ * Possible properties are:
+ *   + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
+ *     at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
+ *     used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
+ *     you want RAM pointers.
+ *   + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
+ *     in static memory is in RAM, not in flash memory.
+ *   + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
+ *     the driver must know the descriptor's length. The descriptor itself is
+ *     found at the address of a well known identifier (see below).
+ * List of static descriptor names (must be declared PROGMEM if in flash):
+ *   char usbDescriptorDevice[];
+ *   char usbDescriptorConfiguration[];
+ *   char usbDescriptorHidReport[];
+ *   char usbDescriptorString0[];
+ *   int usbDescriptorStringVendor[];
+ *   int usbDescriptorStringDevice[];
+ *   int usbDescriptorStringSerialNumber[];
+ * Other descriptors can't be provided statically, they must be provided
+ * dynamically at runtime.
+ *
+ * Descriptor properties are or-ed or added together, e.g.:
+ * #define USB_CFG_DESCR_PROPS_DEVICE   (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
+ *
+ * The following descriptors are defined:
+ *   USB_CFG_DESCR_PROPS_DEVICE
+ *   USB_CFG_DESCR_PROPS_CONFIGURATION
+ *   USB_CFG_DESCR_PROPS_STRINGS
+ *   USB_CFG_DESCR_PROPS_STRING_0
+ *   USB_CFG_DESCR_PROPS_STRING_VENDOR
+ *   USB_CFG_DESCR_PROPS_STRING_PRODUCT
+ *   USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
+ *   USB_CFG_DESCR_PROPS_HID
+ *   USB_CFG_DESCR_PROPS_HID_REPORT
+ *   USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
+ *
+ * Note about string descriptors: String descriptors are not just strings, they
+ * are Unicode strings prefixed with a 2 byte header. Example:
+ * int  serialNumberDescriptor[] = {
+ *     USB_STRING_DESCRIPTOR_HEADER(6),
+ *     'S', 'e', 'r', 'i', 'a', 'l'
+ * };
+ */
+
+#define USB_CFG_DESCR_PROPS_DEVICE                  0
+#define USB_CFG_DESCR_PROPS_CONFIGURATION           USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_CONFIGURATION           0
+#define USB_CFG_DESCR_PROPS_STRINGS                 0
+#define USB_CFG_DESCR_PROPS_STRING_0                0
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR           0
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT          0
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER    0
+#define USB_CFG_DESCR_PROPS_HID                     USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID                     0
+#define USB_CFG_DESCR_PROPS_HID_REPORT              USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID_REPORT              0
+#define USB_CFG_DESCR_PROPS_UNKNOWN                 0
+
+#define usbMsgPtr_t unsigned short
+/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to
+ * a scalar type here because gcc generates slightly shorter code for scalar
+ * arithmetics than for pointer arithmetics. Remove this define for backward
+ * type compatibility or define it to an 8 bit type if you use data in RAM only
+ * and all RAM is below 256 bytes (tiny memory model in IAR CC).
+ */
+
+/* ----------------------- Optional MCU Description ------------------------ */
+
+/* The following configurations have working defaults in usbdrv.h. You
+ * usually don't need to set them explicitly. Only if you want to run
+ * the driver on a device which is not yet supported or with a compiler
+ * which is not fully supported (such as IAR C) or if you use a differnt
+ * interrupt than INT0, you may have to define some of these.
+ */
+/* #define USB_INTR_CFG            MCUCR */
+/* #define USB_INTR_CFG_SET        ((1 << ISC00) | (1 << ISC01)) */
+/* #define USB_INTR_CFG_CLR        0 */
+/* #define USB_INTR_ENABLE         GIMSK */
+/* #define USB_INTR_ENABLE_BIT     INT0 */
+/* #define USB_INTR_PENDING        GIFR */
+/* #define USB_INTR_PENDING_BIT    INTF0 */
+/* #define USB_INTR_VECTOR         INT0_vect */
+
+/* Set INT1 for D- falling edge to count SOF */
+/* #define USB_INTR_CFG            EICRA */
+// #define USB_INTR_CFG_SET        ((1 << ISC11) | (0 << ISC10))
+// /* #define USB_INTR_CFG_CLR        0 */
+// /* #define USB_INTR_ENABLE         EIMSK */
+// #define USB_INTR_ENABLE_BIT     INT1
+// /* #define USB_INTR_PENDING        EIFR */
+// #define USB_INTR_PENDING_BIT    INTF1
+// #define USB_INTR_VECTOR         INT1_vect
+
+#endif /* __usbconfig_h_included__ */
--- a/keyboards/ergo42/rev1/config.h
+++ b/keyboards/ergo42/rev1/config.h
@@ -40,8 +40,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 }
 // #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6 } //uncomment this line and comment line above if you need to reverse left-to-right key order

-#define CATERINA_BOOTLOADER
-
 /* define tapping term */
 #define TAPPING_TERM 100

--- a/keyboards/ergo42/rules.mk
+++ b/keyboards/ergo42/rules.mk
@@ -43,13 +43,15 @@ F_USB = $(F_CPU)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT


-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+

 # Build Options
 #   change to "no" to disable the options, or define them in the Makefile in
--- a/keyboards/gergo/config.h
+++ b/keyboards/gergo/config.h
@@ -21,6 +21,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 #include "config_common.h"

+#define BOOTMAGIC_LITE_ROW 13
+#define BOOTMAGIC_LITE_COLUMN 2
+
 /* Defaults */
 #ifndef BALLSTEP
 #define BALLSTEP 20
--- a/keyboards/gergo/keymaps/oled/config.h
+++ b/keyboards/gergo/keymaps/oled/config.h
@@ -0,0 +1,4 @@
+#pragma once
+
+#define IGNORE_MOD_TAP_INTERRUPT
+#define OLED_FONT_H "keyboards/gergo/keymaps/oled/glcdfont.c"
--- a/keyboards/gergo/keymaps/oled/glcdfont.c
+++ b/keyboards/gergo/keymaps/oled/glcdfont.c
@@ -0,0 +1,232 @@
+// 'loveLain', 128x32px
+
+#include <avr/io.h>
+#include <avr/pgmspace.h>
+
+static const unsigned char font[] PROGMEM = {
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00,
+0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00,
+0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00,
+0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00,
+0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00,
+0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00,
+0x00, 0x18, 0x3C, 0x18, 0x00, 0x00,
+0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00,
+0x00, 0x18, 0x24, 0x18, 0x00, 0x00,
+0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00,
+0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00,
+0x26, 0x29, 0x79, 0x29, 0x26, 0x00,
+0x40, 0x7F, 0x05, 0x05, 0x07, 0x00,
+0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00,
+0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00,
+0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00,
+0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00,
+0x14, 0x22, 0x7F, 0x22, 0x14, 0x00,
+0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00,
+0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00,
+0x00, 0x66, 0x89, 0x95, 0x6A, 0x00,
+0x60, 0x60, 0x60, 0x60, 0x60, 0x00,
+0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00,
+0x08, 0x04, 0x7E, 0x04, 0x08, 0x00,
+0x10, 0x20, 0x7E, 0x20, 0x10, 0x00,
+0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00,
+0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00,
+0x1E, 0x10, 0x10, 0x10, 0x10, 0x00,
+0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00,
+0x30, 0x38, 0x3E, 0x38, 0x30, 0x00,
+0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x5F, 0x00, 0x00, 0x00,
+0x00, 0x07, 0x00, 0x07, 0x00, 0x00,
+0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00,
+0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00,
+0x23, 0x13, 0x08, 0x64, 0x62, 0x00,
+0x36, 0x49, 0x56, 0x20, 0x50, 0x00,
+0x00, 0x08, 0x07, 0x03, 0x00, 0x00,
+0x00, 0x1C, 0x22, 0x41, 0x00, 0x00,
+0x00, 0x41, 0x22, 0x1C, 0x00, 0x00,
+0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00,
+0x08, 0x08, 0x3E, 0x08, 0x08, 0x00,
+0x00, 0x80, 0x70, 0x30, 0x00, 0x00,
+0x08, 0x08, 0x08, 0x08, 0x08, 0x00,
+0x00, 0x00, 0x60, 0x60, 0x00, 0x00,
+0x20, 0x10, 0x08, 0x04, 0x02, 0x00,
+0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00,
+0x00, 0x42, 0x7F, 0x40, 0x00, 0x00,
+0x72, 0x49, 0x49, 0x49, 0x46, 0x00,
+0x21, 0x41, 0x49, 0x4D, 0x33, 0x00,
+0x18, 0x14, 0x12, 0x7F, 0x10, 0x00,
+0x27, 0x45, 0x45, 0x45, 0x39, 0x00,
+0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00,
+0x41, 0x21, 0x11, 0x09, 0x07, 0x00,
+0x36, 0x49, 0x49, 0x49, 0x36, 0x00,
+0x46, 0x49, 0x49, 0x29, 0x1E, 0x00,
+0x00, 0x00, 0x14, 0x00, 0x00, 0x00,
+0x00, 0x40, 0x34, 0x00, 0x00, 0x00,
+0x00, 0x08, 0x14, 0x22, 0x41, 0x00,
+0x14, 0x14, 0x14, 0x14, 0x14, 0x00,
+0x00, 0x41, 0x22, 0x14, 0x08, 0x00,
+0x02, 0x01, 0x59, 0x09, 0x06, 0x00,
+0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00,
+0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00,
+0x7F, 0x49, 0x49, 0x49, 0x36, 0x00,
+0x3E, 0x41, 0x41, 0x41, 0x22, 0x00,
+0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00,
+0x7F, 0x49, 0x49, 0x49, 0x41, 0x00,
+0x7F, 0x09, 0x09, 0x09, 0x01, 0x00,
+0x3E, 0x41, 0x41, 0x51, 0x73, 0x00,
+0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00,
+0x00, 0x41, 0x7F, 0x41, 0x00, 0x00,
+0x20, 0x40, 0x41, 0x3F, 0x01, 0x00,
+0x7F, 0x08, 0x14, 0x22, 0x41, 0x00,
+0x7F, 0x40, 0x40, 0x40, 0x40, 0x00,
+0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00,
+0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00,
+0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00,
+0x7F, 0x09, 0x09, 0x09, 0x06, 0x00,
+0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00,
+0x7F, 0x09, 0x19, 0x29, 0x46, 0x00,
+0x26, 0x49, 0x49, 0x49, 0x32, 0x00,
+0x03, 0x01, 0x7F, 0x01, 0x03, 0x00,
+0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00,
+0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00,
+0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00,
+0x63, 0x14, 0x08, 0x14, 0x63, 0x00,
+0x03, 0x04, 0x78, 0x04, 0x03, 0x00,
+0x61, 0x59, 0x49, 0x4D, 0x43, 0x00,
+0x00, 0x7F, 0x41, 0x41, 0x41, 0x00,
+0x02, 0x04, 0x08, 0x10, 0x20, 0x00,
+0x00, 0x41, 0x41, 0x41, 0x7F, 0x00,
+0x04, 0x02, 0x01, 0x02, 0x04, 0x00,
+0x40, 0x40, 0x40, 0x40, 0x40, 0x00,
+0x00, 0x03, 0x07, 0x08, 0x00, 0x00,
+0x20, 0x54, 0x54, 0x78, 0x40, 0x00,
+0x7F, 0x28, 0x44, 0x44, 0x38, 0x00,
+0x38, 0x44, 0x44, 0x44, 0x28, 0x00,
+0x38, 0x44, 0x44, 0x28, 0x7F, 0x00,
+0x38, 0x54, 0x54, 0x54, 0x18, 0x00,
+0x00, 0x08, 0x7E, 0x09, 0x02, 0x00,
+0x18, 0xA4, 0xA4, 0x9C, 0x78, 0x00,
+0x7F, 0x08, 0x04, 0x04, 0x78, 0x00,
+0x00, 0x44, 0x7D, 0x40, 0x00, 0x00,
+0x20, 0x40, 0x40, 0x3D, 0x00, 0x00,
+0x7F, 0x10, 0x28, 0x44, 0x00, 0x00,
+0x00, 0x41, 0x7F, 0x40, 0x00, 0x00,
+0x7C, 0x04, 0x78, 0x04, 0x78, 0x00,
+0x7C, 0x08, 0x04, 0x04, 0x78, 0x00,
+0x38, 0x44, 0x44, 0x44, 0x38, 0x00,
+0xFC, 0x18, 0x24, 0x24, 0x18, 0x00,
+0x18, 0x24, 0x24, 0x18, 0xFC, 0x00,
+0x7C, 0x08, 0x04, 0x04, 0x08, 0x00,
+0x48, 0x54, 0x54, 0x54, 0x24, 0x00,
+0x04, 0x04, 0x3F, 0x44, 0x24, 0x00,
+0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00,
+0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00,
+0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00,
+0x44, 0x28, 0x10, 0x28, 0x44, 0x00,
+0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00,
+0x44, 0x64, 0x54, 0x4C, 0x44, 0x00,
+0x00, 0x08, 0x36, 0x41, 0x00, 0x00,
+0x00, 0x00, 0x77, 0x00, 0x00, 0x00,
+0x00, 0x41, 0x36, 0x08, 0x00, 0x00,
+0x02, 0x01, 0x02, 0x04, 0x02, 0x00,
+0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x40, 0x28,
+0x00, 0x48, 0xC2, 0x24, 0x10, 0x12,
+0x24, 0x10, 0x12, 0x29, 0x10, 0x22,
+0x58, 0x44, 0x90, 0x20, 0x80, 0x00,
+0x00, 0x04, 0x10, 0x88, 0x40, 0x20,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0xE8,
+0x00, 0x20, 0x00, 0x10, 0x08, 0x08,
+0x00, 0x08, 0x10, 0x00, 0x10, 0x20,
+0x40, 0x40, 0x80, 0x00, 0x00, 0x00,
+0x00, 0x14, 0x42, 0x01, 0x00, 0x01,
+0x02, 0x04, 0x08, 0x10, 0x20, 0x00,
+0x40, 0x40, 0x00, 0x40, 0x40, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x40,
+0x10, 0x08, 0x00, 0x00, 0x00, 0x40,
+0x10, 0x80, 0x50, 0x22, 0xA4, 0x10,
+0x52, 0x24, 0x10, 0x32, 0x08, 0x44,
+0x64, 0x20, 0x90, 0x80, 0x40, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC,
+0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00,
+0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E,
+0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00,
+0x00, 0x80, 0xC0, 0xE0, 0x7E, 0x5B,
+0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00,
+0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE,
+0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x82, 0x11, 0x48, 0x00,
+0x37, 0xC0, 0x00, 0x00, 0x08, 0x10,
+0x02, 0x48, 0x14, 0x00, 0x00, 0x00,
+0x41, 0x42, 0xA2, 0x81, 0x42, 0x61,
+0x04, 0x22, 0x00, 0x40, 0x82, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0xDE,
+0x00, 0x49, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x01, 0x02, 0x04,
+0x08, 0x00, 0x08, 0x15, 0x20, 0x40,
+0x00, 0x40, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x2C, 0x03, 0x60, 0x20, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x02, 0x00,
+0x85, 0x20, 0x00, 0x42, 0x42, 0x42,
+0x85, 0x44, 0xC2, 0x01, 0x00, 0x00,
+0x48, 0x10, 0x04, 0x48, 0x10, 0x00,
+0x00, 0x01, 0xA0, 0x5E, 0x00, 0xA2,
+0x14, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F,
+0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00,
+0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F,
+0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00,
+0x30, 0x7B, 0x7F, 0x78, 0x30, 0x20,
+0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00,
+0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F,
+0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x01, 0x00, 0x09,
+0x12, 0x20, 0x89, 0x12, 0x42, 0x24,
+0x04, 0x48, 0x0C, 0x90, 0x06, 0x21,
+0x4A, 0x05, 0x84, 0x00, 0x02, 0x00,
+0x00, 0x00, 0x08, 0x04, 0x00, 0x02,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0xAD,
+0x00, 0x2A, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x20, 0x00, 0x20,
+0x00, 0x40, 0x00, 0x00, 0x40, 0x00,
+0x40, 0x00, 0x40, 0x40, 0x00, 0x40,
+0x00, 0x40, 0x20, 0x00, 0x90, 0x48,
+0x03, 0x10, 0x08, 0x03, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x02, 0x09,
+0x10, 0x20, 0x08, 0x00, 0x00, 0x02,
+0x00, 0x02, 0x48, 0x15, 0x02, 0xA4,
+0x08, 0x44, 0x88, 0x24, 0x48, 0x04,
+0xA2, 0x15, 0x00, 0x0A, 0x01, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+static const unsigned int  fontLen = 512;
--- a/keyboards/gergo/keymaps/oled/keymap.c
+++ b/keyboards/gergo/keymaps/oled/keymap.c
@@ -0,0 +1,145 @@
+/* Good on you for modifying your layout! if you don't have
+ * time to read the QMK docs, a list of keycodes can be found at
+ *
+ * https://github.com/qmk/qmk_firmware/blob/master/docs/keycodes.md
+ *
+ * There's also a template for adding new layers at the bottom of this file!
+ */
+
+#include QMK_KEYBOARD_H
+
+#define BASE 0 // default layer
+#define SYMB 1 // symbols
+#define NUMB 2 // numbers/motion
+
+// Blank template at the bottom
+enum customKeycodes {
+	URL  = 1
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap 0: Basic layer
+ *
+ * ,-------------------------------------------.                         ,-------------------------------------------.
+ * | L1/ESC |   Q  |   W  |   E  |   R  |   T  |                         |   Y  |   U  |   I  |   O  |   P  |  | \   |
+ * |--------+------+------+------+------+------|------.           .------|------+------+------+------+------+--------|
+ * |Ctrl/BS |   A  |   S  |  D   |   F  |   G  | RMB  |           |      |   H  |   J  |   K  |   L  | ;  : |  ' "   |
+ * |--------+------+------+------+------+------|------|           |------|------+------+------+------+------+--------|
+ * | LShift |   Z  |   X  |   C  |   V  |   B  | LMB  |           |      |   N  |   M  | ,  < | . >  | /  ? |  - _   |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *                    .----------.   .-------.                                 .------.   .-----.
+ *                    | Super/Del|   |Ent/ALT|                                 | Tab  |   |BKSP |
+ *                    '----------'   '-------'                                 `------.   '-----'
+ *                                        ,-------.                      ,-------.
+ *                                        | MMB   |                      | PgDn  |
+ *                                 ,------|-------|                      |-------|------.
+ *                                 | SYMB | NUMB  |                      | SYMB  | NUMB |
+ *                                 | Space| Escape|                      | Mod   |Space |
+ *                                 |      |       |                      |       |      |
+ *                                 `--------------'                      `--------------'
+ */
+[BASE] = LAYOUT_gergo(
+    LT(NUMB, KC_ESC),       KC_Q,  KC_W,   KC_E,   KC_R, KC_T,                                          KC_Y,    KC_U, KC_I, KC_O,   KC_P,    KC_PIPE,
+    MT(MOD_LCTL, KC_BSPC),  KC_A,  KC_S,   KC_D,   KC_F, KC_G, KC_BTN2,                       KC_TRNS,  KC_H,    KC_J, KC_K, KC_L,   KC_SCLN, KC_QUOT,
+    KC_RSFT,                KC_Z,  KC_X,   KC_C,   KC_V, KC_B, KC_BTN1, KC_BTN3,     KC_PGDN, KC_BSPC,  KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_MINS,
+  MT(MOD_LGUI, KC_DEL), MT(MOD_LALT, KC_ENT), LT(SYMB, KC_SPC), LT(NUMB, KC_ESC),    LT(SYMB, KC_ENT), LT(NUMB, KC_SPC), KC_TAB, KC_BSPC
+    ),
+/* Keymap 1: Symbols layer
+ *
+ * ,-------------------------------------------.                         ,-------------------------------------------.
+ * |        |  !   |  @   |  {   |  }   |  |   |                         |      |      |      |      |      |  \ |   |
+ * |--------+------+------+------+------+------|------.           .------|------+------+------+------+------+--------|
+ * |        |  #   |  $   |  (   |  )   |  `   |      |           |      |   +  |  -   |  /   |  *   |  %   |  ' "   |
+ * |--------+------+------+------+------+------|------|           |------|------+------+------+------+------+--------|
+ * |        |  %   |  ^   |  [   |  ]   |  ~   |      |           |      |   &  |  =   |  ,   |  .   |  / ? | - _    |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *                        .------.   .------.                                 .------.   .-----.
+ *                        |      |   |      |                                 |      |   | DEL |
+ *                        '------'   '------'                                 `------.   '-----'
+ *                                        ,-------.                     ,-------.
+ *                                        |       |                     | PgUp  |
+ *                                 ,------|-------|                     |-------|------.
+ *                                 |      |       |                     |       |      |
+ *                                 |   ;  |   =   |                     |   =   |   ;  |
+ *                                 |      |       |                     |       |      |
+ *                                 `--------------'                     `--------------'
+ */
+[SYMB] = LAYOUT_gergo(
+    KC_TRNS, KC_EXLM, KC_AT,   KC_LCBR, KC_RCBR, KC_PIPE,                                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS,
+    KC_TRNS, KC_HASH, KC_DLR,  KC_LPRN, KC_RPRN, KC_GRV,  KC_TRNS,                          KC_TRNS, KC_PLUS, KC_MINS, KC_SLSH, KC_ASTR, KC_PERC, KC_QUOT,
+    KC_TRNS, KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_TILD, KC_TRNS, KC_TRNS,        KC_TRNS, KC_TRNS, KC_AMPR, KC_EQL,  KC_COMM, KC_DOT,  KC_SLSH, KC_MINS,
+                                        KC_TRNS, KC_TRNS, KC_SCLN, KC_EQL,         KC_EQL,  KC_SCLN, KC_PGUP, KC_DEL
+    ),
+/* Keymap 2: Pad/Function layer
+ *
+ * ,-------------------------------------------.                         ,-------------------------------------------.
+ * |        |   1  |  2   |  3   |  4   |  5   |                         |  6   |  7   |  8   |  9   |  0   |        |
+ * |--------+------+------+------+------+------|------.           .------|------+------+------+------+------+--------|
+ * |  F1    |  F2  | F3   | F4   | F5   | F6   | BTN1 |           |      | LEFT | DOWN |  UP  | RIGHT|VolDn | VolUp  |
+ * |--------+------+------+------+------+------|------|           |------|------+------+------+------+------+--------|
+ * |  F7    |  F8  | F9   | F10  | F11  | F12  | BTN2 |           |      | MLFT | MDWN | MUP  | MRGHT|Ply/Pa|  Skip  |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *                        .------.   .------.                                 .------.   .-----.
+ *                        |      |   |      |                                 |      |   |     |
+ *                        '------'   '------'                                 `------.   '-----'
+ *                                        ,-------.                     ,-------.
+ *                                        |       |                     | PgUp  |
+ *                                 ,------|-------|                     |-------|------.
+ *                                 |      |       |                     |       |      |
+ *                                 |      |       |                     |       |      |
+ *                                 |      |       |                     |       |      |
+ *                                 `--------------'                     `--------------'
+ */
+[NUMB] = LAYOUT_gergo(
+    KC_TRNS, KC_1, 	  KC_2,    KC_3,    KC_4,    KC_5,                                             KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_TRNS,
+    KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,                         KC_TRNS,  KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_VOLD, KC_VOLU,
+    KC_TRNS, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS,     KC_TRNS, KC_TRNS,  KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_MPLY, KC_MNXT,
+                                        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,         KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+};
+
+/* Keymap template
+ *
+ * ,-------------------------------------------.                         ,-------------------------------------------.
+ * |        |      |      |      |      |      |                         |      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|------.           .------|------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|------|           |------|------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *                        .------.   .------.                                 .------.   .-----.
+ *                        |      |   |      |                                 |      |   |     |
+ *                        '------'   '------'                                 `------.   '-----'
+ *                                        ,-------.       ,-------.
+ *                                        |       |       |       |
+ *                                 ,------|-------|       |-------|------.
+ *                                 |      |       |       |       |      |
+ *                                 |      |       |       |       |      |
+ *                                 |      |       |       |       |      |
+ *                                 `--------------'       `--------------'
+[SYMB] = LAYOUT_gergo(
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                                             KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                           KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                                        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    )
+ */
+
+#ifdef OLED_DRIVER_ENABLE
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+	return OLED_ROTATION_180;
+}
+
+void oled_task_user(void) {
+    static const char PROGMEM font_logo[] = {
+        0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
+        0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
+		0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0};
+	oled_write_P(font_logo, false);
+
+}
+	//for (int i = 0; i < fontLen; i++) {
+    	//oled_write_char(pgm_read_byte(lain+i), false);
+    	//oled_write_char((char)i, false);
+	//}
+#endif
--- a/keyboards/gergo/keymaps/oled/readme.md
+++ b/keyboards/gergo/keymaps/oled/readme.md
@@ -0,0 +1,10 @@
+# [Gergo! By g Heavy Industries](http://gboards.ca)
+
+![Gergo image](https://4.bp.blogspot.com/-889nMXxgSM0/XCNxwnO5kUI/AAAAAAAA6mI/tZbWgZVCBW0dyZOCGJDkjN06DVax7j8XwCLcBGAs/s1600/48422820_967732713413298_485744639215665152_n.jpg)
+
+This is the default keymap for Gergo, it's based heavily off of the naps62 ErgoDox layout and is aimed at a programmer friendly keymap.
+
+## Settings
+To edit various settings, enable the 1u trackball and whatnot please modify /keyboards/gergo/keymaps/default/rules.mk
+
+Ideally you should copy this directory and make your changes there. If you come up with a good layout submit a PR!
--- a/keyboards/gergo/keymaps/oled/rules.mk
+++ b/keyboards/gergo/keymaps/oled/rules.mk
@@ -0,0 +1,38 @@
+#----------------------------------------------------------------------------
+# make gergo:germ:dfu
+# Make sure you have dfu-programmer installed!
+#----------------------------------------------------------------------------
+# Firmware options
+BALLER = no 			# Enable to ball out
+BALLSTEP = 20  			# Multiple in px to move, multiplied by layer number
+SCROLLSTEP = 1 			# Lines to scroll with ball
+MOUSEKEY_ENABLE = yes  		# Mouse keys(+4700), needed for baller
+OLED_DRIVER_ENABLE = yes
+LOCAL_GLCDFONT = yes
+
+#Debug options
+VERBOSE 		 = yes
+DEBUG_MATRIX_SCAN_RATE   = no
+DEBUG_BALLER 		 = no
+DEBUG_MATRIX		 = yes
+
+# A bunch of stuff that you shouldn't touch unless you
+# know what you're doing.
+#
+# No touchy, capiche?
+ifneq ($(strip $(BALLSTEP)),)
+    OPT_DEFS += -DTRKSTEP=$(strip $(BALLSTEP))
+endif
+ifneq ($(strip $(SCROLLSTEP)),)
+    OPT_DEFS += -DSCROLLSTEP=$(strip $(SCROLLSTEP))
+endif
+ifeq ($(strip $(BALLER)), yes)
+	POINTING_DEVICE_ENABLE	= yes
+    OPT_DEFS += -DBALLER
+endif
+ifeq ($(strip $(DEBUG_BALLER)), yes)
+    OPT_DEFS += -DDEBUG_BALLER
+endif
+ifeq ($(strip $(DEBUG_MATRIX)), yes)
+    OPT_DEFS += -DDEBUG_MATRIX
+endif
--- a/keyboards/gergo/rules.mk
+++ b/keyboards/gergo/rules.mk
@@ -4,7 +4,8 @@
 # Do not edit this file! Make a copy of keymaps/default and modify that!
 #----------------------------------------------------------------------------
 # Source includes
-SRC += matrix.c i2c_master.c
+SRC += matrix.c 
+QUANTUM_LIB_SRC += i2c_master.c

 # Hardware info
 MCU = atmega32u4
@@ -17,5 +18,6 @@ CUSTOM_MATRIX 		= yes
 EXTRAKEY_ENABLE		= yes
 CONSOLE_ENABLE  	= yes
 COMMAND_ENABLE		= yes
+BOOTMAGIC_ENABLE = lite

 DEBOUNCE_TYPE  = eager_pr
--- a/keyboards/gh60/revc/config.h
+++ b/keyboards/gh60/revc/config.h
@@ -14,10 +14,6 @@ GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program. If not, see <http://www.gnu.org/licenses/>.
 */
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
 #include "config_common.h"

 /* USB Device descriptor parameter */
@@ -152,5 +148,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_ONESHOT
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
-
-#endif
--- a/keyboards/gh60/revc/info.json
+++ b/keyboards/gh60/revc/info.json
--- a/keyboards/gh60/revc/keymaps/bluezio/keymap.c
+++ b/keyboards/gh60/revc/keymaps/bluezio/keymap.c
--- a/keyboards/gh60/revc/keymaps/bluezio/rules.mk
+++ b/keyboards/gh60/revc/keymaps/bluezio/rules.mk
--- a/keyboards/gh60/revc/keymaps/chaser/README.md
+++ b/keyboards/gh60/revc/keymaps/chaser/README.md
--- a/keyboards/gh60/revc/keymaps/chaser/keymap.c
+++ b/keyboards/gh60/revc/keymaps/chaser/keymap.c
--- a/keyboards/gh60/revc/keymaps/dbroqua/config.h
+++ b/keyboards/gh60/revc/keymaps/dbroqua/config.h
--- a/keyboards/gh60/revc/keymaps/dbroqua/keymap.c
+++ b/keyboards/gh60/revc/keymaps/dbroqua/keymap.c
--- a/keyboards/gh60/revc/keymaps/dbroqua/rules.mk
+++ b/keyboards/gh60/revc/keymaps/dbroqua/rules.mk
--- a/keyboards/gh60/revc/keymaps/dbroqua_7U/keymap.c
+++ b/keyboards/gh60/revc/keymaps/dbroqua_7U/keymap.c
--- a/keyboards/gh60/revc/keymaps/dbroqua_7U/rules.mk
+++ b/keyboards/gh60/revc/keymaps/dbroqua_7U/rules.mk
--- a/keyboards/gh60/revc/keymaps/default/keymap.c
+++ b/keyboards/gh60/revc/keymaps/default/keymap.c
--- a/keyboards/gh60/revc/keymaps/emiilsd/keymap.c
+++ b/keyboards/gh60/revc/keymaps/emiilsd/keymap.c
--- a/keyboards/gh60/revc/keymaps/maartenwut/keymap.c
+++ b/keyboards/gh60/revc/keymaps/maartenwut/keymap.c
--- a/keyboards/gh60/revc/keymaps/maxr1998/config.h
+++ b/keyboards/gh60/revc/keymaps/maxr1998/config.h
--- a/keyboards/gh60/revc/keymaps/maxr1998/keymap.c
+++ b/keyboards/gh60/revc/keymaps/maxr1998/keymap.c
--- a/keyboards/gh60/revc/keymaps/maxr1998/rules.mk
+++ b/keyboards/gh60/revc/keymaps/maxr1998/rules.mk
--- a/keyboards/gh60/revc/keymaps/robotmaxtron/config.h
+++ b/keyboards/gh60/revc/keymaps/robotmaxtron/config.h
--- a/keyboards/gh60/revc/keymaps/robotmaxtron/keymap.c
+++ b/keyboards/gh60/revc/keymaps/robotmaxtron/keymap.c
--- a/keyboards/gh60/revc/keymaps/robotmaxtron/readme.md
+++ b/keyboards/gh60/revc/keymaps/robotmaxtron/readme.md
--- a/keyboards/gh60/revc/keymaps/robotmaxtron/rules.mk
+++ b/keyboards/gh60/revc/keymaps/robotmaxtron/rules.mk
--- a/keyboards/gh60/revc/keymaps/sethbc/keymap.c
+++ b/keyboards/gh60/revc/keymaps/sethbc/keymap.c
--- a/keyboards/gh60/revc/keymaps/sethbc/rules.mk
+++ b/keyboards/gh60/revc/keymaps/sethbc/rules.mk
--- a/keyboards/gh60/revc/keymaps/xyverz/keymap.c
+++ b/keyboards/gh60/revc/keymaps/xyverz/keymap.c
--- a/keyboards/gh60/revc/pinout.txt
+++ b/keyboards/gh60/revc/pinout.txt
--- a/keyboards/gh60/revc/readme.md
+++ b/keyboards/gh60/revc/readme.md
@@ -1,5 +1,4 @@
-GH60
-===
+# GH60 Rev C

 ![gh60 Rev C PCB](https://i.imgur.com/FejpoNF.jpg)

@@ -11,7 +10,9 @@ Hardware Availability: http://blog.komar.be/projects/gh60-programmable-keyboard/

 Make example for this keyboard (after setting up your build environment):

-    make gh60:default
+    make gh60/revc:default
+
+**Note:** This GH60 firmware will not be compatible with the GH60 Satan PCB. Conversely, the GH60 Satan firmware will not be compatible with this PCB. Please ensure you have the correct firmware/pcb combination before flashing. 

 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

--- a/keyboards/gh60/revc/revc.c
+++ b/keyboards/gh60/revc/revc.c
@@ -1,4 +1,4 @@
-#include "gh60.h"
+#include "revc.h"


 extern inline void gh60_caps_led_on(void);
--- a/keyboards/gh60/revc/revc.h
+++ b/keyboards/gh60/revc/revc.h
--- a/keyboards/gh60/revc/rules.mk
+++ b/keyboards/gh60/revc/rules.mk
@@ -50,7 +50,7 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE = yes		# Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE = lite		# Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes		# Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes		# Audio control and System control(+450)
 # CONSOLE_ENABLE = yes		# Console for debug(+400)
--- a/keyboards/gh60/satan/config.h
+++ b/keyboards/gh60/satan/config.h
--- a/keyboards/gh60/satan/info.json
+++ b/keyboards/gh60/satan/info.json
--- a/keyboards/gh60/satan/keymaps/abhixec/keymap.c
+++ b/keyboards/gh60/satan/keymaps/abhixec/keymap.c
--- a/keyboards/gh60/satan/keymaps/abhixec/readme.md
+++ b/keyboards/gh60/satan/keymaps/abhixec/readme.md
--- a/keyboards/gh60/satan/keymaps/abhixec/rules.mk
+++ b/keyboards/gh60/satan/keymaps/abhixec/rules.mk
--- a/keyboards/gh60/satan/keymaps/addcninblue/keymap.c
+++ b/keyboards/gh60/satan/keymaps/addcninblue/keymap.c
--- a/keyboards/gh60/satan/keymaps/addcninblue/readme.md
+++ b/keyboards/gh60/satan/keymaps/addcninblue/readme.md
--- a/keyboards/gh60/satan/keymaps/addcninblue/rules.mk
+++ b/keyboards/gh60/satan/keymaps/addcninblue/rules.mk
--- a/keyboards/gh60/satan/keymaps/admiralStrokers/config.h
+++ b/keyboards/gh60/satan/keymaps/admiralStrokers/config.h
--- a/keyboards/gh60/satan/keymaps/admiralStrokers/keymap.c
+++ b/keyboards/gh60/satan/keymaps/admiralStrokers/keymap.c
--- a/keyboards/gh60/satan/keymaps/admiralStrokers/readme.md
+++ b/keyboards/gh60/satan/keymaps/admiralStrokers/readme.md
--- a/keyboards/gh60/satan/keymaps/admiralStrokers/rules.mk
+++ b/keyboards/gh60/satan/keymaps/admiralStrokers/rules.mk
--- a/keyboards/gh60/satan/keymaps/ben_iso/config.h
+++ b/keyboards/gh60/satan/keymaps/ben_iso/config.h
--- a/keyboards/gh60/satan/keymaps/ben_iso/keymap.c
+++ b/keyboards/gh60/satan/keymaps/ben_iso/keymap.c
--- a/keyboards/gh60/satan/keymaps/ben_iso/readme.md
+++ b/keyboards/gh60/satan/keymaps/ben_iso/readme.md
--- a/keyboards/gh60/satan/keymaps/ben_iso/rules.mk
+++ b/keyboards/gh60/satan/keymaps/ben_iso/rules.mk
--- a/keyboards/gh60/satan/keymaps/bri/keymap.c
+++ b/keyboards/gh60/satan/keymaps/bri/keymap.c
--- a/keyboards/gh60/satan/keymaps/bri/readme.md
+++ b/keyboards/gh60/satan/keymaps/bri/readme.md
--- a/keyboards/gh60/satan/keymaps/chaser/keymap.c
+++ b/keyboards/gh60/satan/keymaps/chaser/keymap.c
--- a/keyboards/gh60/satan/keymaps/chaser/readme.md
+++ b/keyboards/gh60/satan/keymaps/chaser/readme.md
--- a/keyboards/gh60/satan/keymaps/chaser/rules.mk
+++ b/keyboards/gh60/satan/keymaps/chaser/rules.mk
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Drashna Jaelre	547fbe769c	Enable PWM Support for Planck EZ Indicator Lights (#6473 ) * remove led layer code * enable PWM on STM32F303 * Unusable PWM code * Updated PWM Stuff? * PWM Semi-working * Both LEDs working at the same time * Update names * Add led level functions * Add LED levels and persistent settings * Revert change due to issues with timing related code * Review feedback and minor cleanup	2019-08-13 10:28:12 -07:00
John M Daly	5004562441	[Keyboard] Add: Initial steamvan firmware code (#6501 ) * Add: Initial steamvan firmware code * Apply suggestions from code review Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update: Remove old macro commands, per reviewer comments * Apply suggestions from code review Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update: Remove redundant backlight struct * Update: Replace preprocessor defines with enum	2019-08-13 10:26:54 -07:00
Seth Barberee	0ec0d29e9f	[Keymap] Adding my userspace and keymaps (#6496 ) * add Userspace and keymaps * Adding keymaps for zeal60 and iris * Created my own tap dance that toggles RGB Mode based on whether I toggled caps lock or not * parent `578ed42a7f` author Seth Barberee <seth.barberee@gmail.com> 1565065903 -0500 committer Seth Barberee <seth.barberee@gmail.com> 1565065903 -0500 move to userspace add zeal60 * update based on review * move userspace to github name	2019-08-13 10:25:51 -07:00
Joel Challis	d8d2a09674	Fix LT() crashing some ARM keyboards (#6529 )	2019-08-13 10:23:14 -07:00
Jarred Steenvoorden	576b138c6e	Add romac keymap (#6523 )	2019-08-12 19:57:00 -07:00
くまお工房	38ad0d2673	Modified imcomplete keymap for kudox jis. (#6524 )	2019-08-12 19:56:25 -07:00
George Petri	ed65881565	update arrows on lower layer (#6517 )	2019-08-10 16:08:53 -07:00
Luciano Malavasi	b93e1309e5	[Keyboard] Add meson keyboard (#6482 ) * Add meson keyboard * Apply suggestions from code review Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Added soft reset and layer 3 * bootmagic light Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>	2019-08-09 18:38:13 -07:00
Sascha Grunert	9114d6ebe9	Update keymap (#6515 ) Signed-off-by: Sascha Grunert <sgrunert@suse.com>	2019-08-09 17:20:43 -07:00
Florian B	c0e6734d3f	[Keymap] removes gamelayer, finally got rgb working (#5817 ) * removes gamelayer, finally got rgb working * lowercasing readme * changed to layout_ortho_4x12 * rules.mk: Removed BACKLIGHT_CUSTOM_DRIVER	2019-08-08 14:17:49 -07:00
fauxpark	406f03bb0c	Mask off TD() parameter properly (#6143 ) * Mask off TD() parameter properly * More parentheses	2019-08-08 14:15:34 -07:00
fauxpark	405dea01be	Add some defaults for ATmega32A to mcu_selection.mk (#6253 ) * Add some defaults for ATmega32A to mcu_selection.mk * Remove boilerplate from templates * Relax INTERRUPT_CONTROL_ENDPOINT and PROGRAM_CMD * Apply suggestions from code review Co-Authored-By: Drashna Jaelre <drashna@live.com>	2019-08-08 14:09:54 -07:00
fauxpark	2f6c068e0d	Extend allowed range of tappable keycodes to include modifiers (#5809 ) * Extend allowed range of tappable keycodes to include modifiers * Get rid of the magic numbers altogether * Remove some more magic numbers * Extract LM() functionality from ACT_LAYER_TAP * Use ACTION() macro everywhere	2019-08-08 13:58:05 -07:00
fauxpark	2a534e87ac	Rename QK_TMK(_MAX) to QK_BASIC (#6509 )	2019-08-08 13:32:30 -07:00
x1	f3e73965f0	[Keymap] Add kudox japanese keymap (#6508 ) * Add a JIS keymap for kudox. * Remove unnecessary codes.	2019-08-08 13:30:21 -07:00
Daniel Shields	b4c03070de	[Keymap] Fix rgb matrix effects on dshields keymaps. (#6505 )	2019-08-08 13:21:54 -07:00
fauxpark	4d72aa428f	Improve backlight PWM pin support (#6202 ) * Improve backlight PWM pin support * I accidentally an equals sign * Another typo * Order by pin number * Throw an error if backlight pin is C4 or C5 on 16/32U4 * Use else for clarity * Minor alignment adjustments	2019-08-08 13:12:12 -07:00
Michael Clayton	57540af102	Change "yu" to "you" in combo docs (#6510 )	2019-08-08 18:10:16 +01:00
MechMerlin	2c0c25d014	Move Alice to TGR Directory (#6502 ) * git mv alice into the tgr directory * update readme with new build instructions	2019-08-07 19:02:27 -07:00
noroadsleft	8479dd65d4	[Keyboard] Southpole: add Configurator layout data (#6498 )	2019-08-07 19:00:45 -07:00
skullydazed	3cb28bbe42	Use the older `universal_newlines` name instead of `text` (#6506 )	2019-08-07 12:00:46 -07:00
dsanchezseco	74d7d232e3	added missing comment of RGB control keys planck/rev6 (#6503 )	2019-08-07 08:06:42 -07:00
Matthew Treadwell	340c3abc28	Update gaming layout (#6504 )	2019-08-07 05:56:03 -07:00
Zach DeCook	009d45d4d7	MIDI: Fix basic noteon: send correct velocity (#6476 )	2019-08-06 11:26:28 -07:00
fauxpark	59d3b37130	Fix qmk_install.sh on Windows dropping to command prompt (#6488 )	2019-08-06 11:20:53 -07:00
jotix	a6701c28d2	[Keymap] Jotix ortho_4x12_layout (#6497 ) * jotix ortho_4x12_layout * jotix ortho_4x12_layout * kc_caps in raise layer	2019-08-06 10:50:28 -07:00
MechMerlin	98b237a21b	[Keyboard] New Keyboard: Booster (#6486 ) * initial commit * port over the kbfirmware json * add numpad_5x4 LAYOUT support * fix up layout macro to allow community layout support * add a sparse readme on how to contact Percent Studio * change .h to a .md file * fix firmware file too large error * Update keyboards/percent/booster/info.json Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/percent/booster/info.json Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/percent/booster/info.json Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/percent/booster/info.json Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/percent/booster/info.json Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/percent/booster/keymaps/default/keymap.c Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/percent/booster/keymaps/default/keymap.c Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/percent/booster/keymaps/default/keymap.c Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/percent/booster/keymaps/default/keymap.c Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/percent/booster/keymaps/default/keymap.c Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/percent/booster/keymaps/default/keymap.c Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>	2019-08-06 10:38:28 -07:00
Jeremy Bernhardt	07bdc8f4b7	[Keyboard] Added little fixes and bootmagic for gBoard keebs (#6477 ) * Added little fixes and bootmagic * Update keyboards/gergo/keymaps/oled/rules.mk Co-Authored-By: Drashna Jaelre <drashna@live.com> * whacked out quantum_libs	2019-08-06 10:20:48 -07:00
Yoshitake Hamano	ae934c389e	[Keymap] hhkb:halfqwerty_jp (#6475 )	2019-08-06 10:18:44 -07:00
Branden Byers	6b27ebefc6	[Keyboard] Add cKeys' "The Dora" Board (#6469 ) * Initial 4x5 * More board * Update exboard * Update * Change name to thedora * Update keyboards/ckeys/thedora/keymaps/default/keymap.c Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/ckeys/thedora/config.h Co-Authored-By: fauxpark <fauxpark@gmail.com> * Remove the slash * Attempt at fixing moxygen line break issues * Update keyboards/ckeys/thedora/config.h Co-Authored-By: fauxpark <fauxpark@gmail.com> * Add boilerplate * Update keyboards/ckeys/thedora/config.h Co-Authored-By: Drashna Jaelre <drashna@live.com>	2019-08-06 10:17:59 -07:00
kakunpc	f54e47c79d	[Keyboard] Fixed Suihankey info.json (#6466 ) * fix info.json * Update keyboards/suihankey/info.json	2019-08-06 10:17:00 -07:00
x1	9587fac72a	[Keyboard] Add kudox keyboard (#6459 ) * Add Kudox Keyboard profile. * Modified info.json and image link on readme. * Remove unnecessary codes. * Set BootLoader caterina. * Remove duplicated settings on rules.mk. * Clean up config.h. * Modified include header path. * Modified info.json to adjust 4th row keys y position. * Separate default keymap and my keymap. * Modified RGB_LED_* settings on kudox/rev1/config.h.	2019-08-06 10:14:40 -07:00
x1	e5831d79c0	[Keyboard] Add kudox game keyboard (#6460 ) * Add configurations for Kudox Game Keyboard rev1. * Modified Kudox Game Keyboard readme and keymap. * Remove unnecessary codes. * Set BootLoader caterina. * Remove wrong settings on rules.mk. * Clean up config.h. * Modified MATRIX_ROWS on kudox_game/rev1/config.h. * Modified RGB_LED_NUM on kudox_game/rev1/config.h.	2019-08-06 09:16:55 -07:00
noroadsleft	d967d3a6b5	Correct info.json data for Hnah40 handwired (#6489 )	2019-08-06 09:15:48 -07:00
coseyfannitutti	620fcf12e8	Update info.json - discipline (#6483 ) * Update info.json * Update readme.md * Update keyboards/coseyfannitutti/discipline/info.json Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>	2019-08-06 08:35:29 -07:00
Sid Carter	cacfaedb81	new keymap for projectkb alice (#6491 ) * new keymap for projectkb alice * update documentation for resetting PCB * actually need a grave key more than a tilde * move DFU_ARGS to top level * cleanup unused keycodes and others * align with typical ergo layouts. move enter and keep function layer reachable	2019-08-06 08:33:56 -07:00
Maarten Dekkers	209b6baaa8	Move maartenwut's keyboards to one folder (#6484 )	2019-08-05 20:12:06 -07:00
MechMerlin	7f8922ae7b	GH60 Refactor: Move Satan into GH60 directory (#6485 ) * Move Satan into the GH60 directory to avoid the confusion of what PCB people have * set bootmagic to lite * rename gh60 file to revc	2019-08-04 23:06:33 -07:00
fauxpark	72f382fc02	Remove unused _BOOTLOADER defines	2019-08-04 20:46:57 -07:00
coseyfannitutti	430c37024e	[Keyboard] add keyboard-discipline (#6464 ) * add keyboard-discipline * move discipline to /coseyfannitutti * Update readme.md * Update keyboards/coseyfannitutti/discipline/discipline.h Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/coseyfannitutti/discipline/discipline.h Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/coseyfannitutti/discipline/info.json Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/coseyfannitutti/discipline/keymaps/coseyfannitutti/keymap.c Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/coseyfannitutti/discipline/info.json Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/coseyfannitutti/discipline/keymaps/67_ansi/keymap.c Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/coseyfannitutti/discipline/keymaps/67_ansi/keymap.c Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/coseyfannitutti/discipline/keymaps/coseyfannitutti/keymap.c Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/coseyfannitutti/discipline/keymaps/default/keymap.c Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/coseyfannitutti/discipline/keymaps/default/keymap.c Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/coseyfannitutti/discipline/readme.md Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/coseyfannitutti/discipline/rules.mk Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update readme.md * Update keyboards/coseyfannitutti/discipline/discipline.c Co-Authored-By: Drashna Jaelre <drashna@live.com>	2019-08-03 21:37:26 -07:00
Garrett Singer	f644db042c	[Split] Add config option for DIRECT_PINS_RIGHT (#6479 ) Adds support for different direct pin mappings on the halves of a split keyboard.	2019-08-03 21:26:02 -07:00
zunger-humu	465acd4d09	[Keymap] Add some more commonly used symbols to melody96/zunger. (#6478 )	2019-08-03 21:25:05 -07:00
Wilba	9ae874e0c3	[Keyboard] WT75-A & WT75-B fixes for QMK Configurator (#6472 ) * Fixed QMK Configurator layout * Added WT60-D	2019-08-03 21:11:28 -07:00
dsanchezseco	0261bf3e30	[Keymap] update to dsanchezseco keymap (#6470 ) * cleanup and start sound * clean up adjust and ptrscrn	2019-08-03 21:10:34 -07:00
tucznak	586bd92ea7	[Keymap] Fixed Tanuki RGB lighting (#6462 )	2019-08-03 21:01:14 -07:00
ai03	d68d510473	Add iS0 Keypad (#6456 ) * Start progress * Build firmware * Prepare for pullreq * Add a keymap * Update keyboards/illuminati/is0/rules.mk Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/illuminati/is0/info.json Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>	2019-08-01 10:03:07 -07:00
jotix	ac20e7e3f2	[Keymap] jotix ortho_4x12_layout (#6458 ) * jotix ortho_4x12_layout * jotix ortho_4x12_layout	2019-08-01 09:51:51 -07:00
MechMerlin	a2d61d76fa	[Keyboard] New Keyboard: KBDPad MKI (#6452 ) * initial commit * define pins used and matrix size * update readme * delete un needed files * make an appropriate switch matrix * create appropriate keymap * one little typo * add QMK Configurator support * Update keyboards/kbdfans/kbdpad/mk1/info.json Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>	2019-08-01 09:39:03 -07:00
Brian L	17eea779df	[Keymap] Adds Keymap for Iris/blucky (#6449 ) * Adds Keymap for Iris/blucky * code review changes * removed custom define * removed mistyped character	2019-08-01 09:36:00 -07:00
XScorpion2	f1cebc9d9d	[Keymap] Fixing Sol Rev2 default keymap OLED rotation. (#6448 )	2019-08-01 09:34:51 -07:00
noroadsleft	9609ae60a6	[Keyboard] QWERTYYdox refactor (#6446 ) * Delete null key `__` key in keymap.c doesn't actually exist on the physical hardware. Removed key from keymap.c and removed its argument from the layout macro. * Delete unused keycode aliases * Replace layer index definitions with an enum * Replace redundant numpad keycodes with native aliases * Use native layer change keycodes instead of aliases * Visually align the keycodes It makes the keymap pretty. * Correct Configurator layout data * Clean up header files - convert to pragma once include guard - remove redundant definitions - remove commented code blocks * Delete LAYOUT_kc macro Was copied from ergotravel; not valid for this keyboard. * Consolidate rev1 rules.mk settings to keyboard level Previous codebase enabled Backlight at keyboard level then disabled it at revision level. * Delete unused rules * Consolidate config.h settings from keymap level to keyboard level * Modernize keyboard's config.h file Aligns the keyboard-level config.h file more closely with the current QMK template for AVR keyboards.	2019-08-01 09:33:13 -07:00
Mazin Power	2a9856dff0	[Keymap] Adds keymap for muzfuz/lunar (#6432 ) * Adds keymaps for muzfuz * Remove unused keys from adjust layer * Bring in line with current QMK standards. * Adds Preonic and adjusted Planck keymaps * Make changes per review request * Lunar config * Formatting * Update keyboards/ai03/lunar/keymaps/muzfuz/readme.md Co-Authored-By: Drashna Jaelre <drashna@live.com> * Remove unneeded recipe	2019-08-01 09:21:20 -07:00
Joel Challis	b567785345	[Docs] Add dfu-util and caterina udev examples (#6429 )	2019-08-01 09:20:31 -07:00
Elliot Powell	9177c6fedd	updates to akb/raine in ready for production units (#6457 ) * Raine Update * Update keymap and usb setting * Update info.json added wk support to info.json	2019-07-31 17:49:27 -07:00
				`@@ -0,0 +1 @@`
				`# The default keymap for the cKeys Handwire 101 4x4 keyboard.`