mirror of
https://github.com/qmk/qmk_firmware.git
synced 2025-09-10 17:15:43 +00:00
7110708d0f
- Update aliases accordingly - Remove unnecessary elite_c revision; an alternate bootloader or development board can easily be set by a user. The PCB is not dependant on an Elite-C pin compatible microcontroller - Remove unnecessary nanoboot revision; any user going to the trouble of using this bootloader will have no trouble manually setting the size of their bootloader - Move the promicro revision to be the "standard" for this keyboard - Remove unnecessary rp2040_ce revision; the converter feature should be used here instead
29 lines
1.4 KiB
Markdown
29 lines
1.4 KiB
Markdown
# Lotus 58 Glow
|
|
|
|
|
|
|
|
* Lotus 58 Glow is a fully programmable 58-key split, ortho-columnar keyboard with a 4x6 main matrix and 4+1 thumb-keys per hand. Optional support for one OLED screen per hand/side showing information such as active layer, CapsLock/NumLock etc. as well as one Rotary Encoder per hand, with optional placement.
|
|
|
|
* Keyboard Maintainer: [TweetyDaBird](https://github.com/TweetyDaBird)
|
|
* Hardware Supported: *Lotus 58 Glow v1.11 - 1.2x PCB, Pro Micro or pin-compatible*
|
|
* Hardware Availability: [Lectronz Store](https://lectronz.com/stores/tweetys-wild-thinking)
|
|
* Hardware Design: [GitHub](https://github.com/TweetyDaBird/Lotus58)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make tweetydabird/lotus58:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make tweetydabird/lotus58:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the top outer key for each hand as it is plugged in
|
|
* **Physical reset**: Briefly short the marked pads on PCB
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if mapped (not in default keymap)
|