Fixed aux and pico

rev2/3d-models/top-dampener.scad

@@ -100,44 +100,60 @@ leftTopDampener();
 }
 
 module case(){
-    // TODO: Continue with applying baseHeight on all things belo
     // Then adjust the shim, aux and pico.
     // Last add magnets, don't forget the clearance.
     $baseHeight = 6;
+    
     module magnets(){
         cylinder(h=$magnetHeight + $clearance, r=$magnetWidth + $clearance / 2);
     }
     module aux(){
-        translate([-$shellWidth,75,0])
+        $topToCenterOfAux = 15.4;
+        $auxHoleRadius = 4;
+        $auxHoleLength = 17 + $shellWidth/2;
+        // Move to the position along the wall the aux will be 
+        translate([-($shellWidth/2 + $clearance),$switchDistance * $rows - $topToCenterOfAux,0])
+            // Make cylinder perpendicular with the wall
             rotate([0,90,0])
-                cylinder(h=$shellWidth + 15,r=2.5);
+                cylinder(h=$auxHoleLength,r=$auxHoleRadius);
+        // TODO: move magnets to somewhere else.
         translate([0,0,5])
             magnets();
     }
     module pico(){
-        translate([10, $switchDistance * 5, -2]){
+        $edgeToCenterOfUsb = 23;
+        $usbHoleWidth = 12;
+        $usbHoleHeight = 9;
+        $usbOffsetFromPcb = 2.4;
+        $picoPcbClearanceFromBase = 3.8;
+        $picoWidth = 25;
+        $picoLength = 53;
+        // Move to position along the wall the usb will be
+        translate([$edgeToCenterOfUsb - ($usbHoleWidth/2), $switchDistance * $rows, -$usbOffsetFromPcb]){
             union() {
-                cube([10,$shellWidth,5]);
-                translate([-5,-$shellWidth + $clearance - 40,0])
-                    cube([20,$shellWidth + 40,5]);
+                // Create a hole for the usb cable to go through
+                cube([$usbHoleWidth,$shellWidth,$usbHoleHeight]);
+                // Move inside the shell
+                translate([-(($picoWidth - $usbHoleWidth)/2),$clearance - $picoLength, +$usbOffsetFromPcb - $picoPcbClearanceFromBase])
+                    // Make clearance downwards for the pico board
+                    cube([$picoWidth,$picoLength, $picoLength]);
                 
             }
         }
     }
     module shim(){
-            rotate([90,0,0]) {    
-        translate([0,0,-500]){
-        linear_extrude(99999){
-            polygon(
-            [
-                [0 - $shellWidth/2, -3],
-                [$switchDistance * 6 + $switchDistance/2,0], 
-                [$switchDistance * 6 + $shellWidth/2, -3]
-            ]
-            );
-        }
-    }
-    }
+        $shimPoints = [
+            [0 - $shellWidth / 2, - $baseHeight],
+            [$switchDistance * $columns + $shellWidth/2 + $clearance, 0], 
+            [$switchDistance * $columns + $shellWidth/2 + $clearance, - $baseHeight]
+        ];
+        // Face z/x-plane
+        rotate([90,0,0])    
+            // Move in front of model on the y-axis
+            translate([0,0,-500])
+                // Extrude it through the case
+                linear_extrude(99999)
+                    polygon($shimPoints);
     }
     module body(){
         points = [
@@ -165,8 +181,8 @@ module case(){
                     offset(r=$clearance) polygon(points);
                 }
             }
-            translate([0,0,-3])
-                linear_extrude(3){
+            translate([0,0,-$baseHeight])
+                linear_extrude($baseHeight){
                     offset(r=$shellWidth/2 + $clearance, chamfer=true) polygon(points);
                 }
         }